Photon‐Upconverting Ionic Liquids: Effective Triplet Energy Migration in Contiguous Ionic Chromophore Arrays

Do Ionic Liquids Exhibit the Required Characteristics to Dissolve, Extract, Stabilize, and Purify Proteins? Past-Present-Future Assessment

Proteins are highly labile molecules, thus requiring the presence of appropriate solvents and excipients in their liquid milieu to keep their stability and biological activity. In this field, ionic liquids (ILs) have gained momentum in the past years, with a relevant number of works reporting their successful use to dissolve, stabilize, extract, and purify proteins. Different approaches in protein-IL systems have been reported, namely, proteins dissolved in (i) neat ILs, (ii) ILs as co-solvents, (iii) ILs as adjuvants, (iv) ILs as surfactants, (v) ILs as phase-forming components of aqueous biphasic systems, and (vi) IL-polymer-protein/peptide conjugates. Herein, we critically analyze the works published to date and provide a comprehensive understanding of the IL-protein interactions affecting the stability, conformational alteration, unfolding, misfolding, and refolding of proteins while providing directions for future studies in view of imminent applications. Overall, it has been found that the stability or purification of proteins by ILs is bispecific and depends on the structure of both the IL and the protein. The most promising IL-protein systems are identified, which is valuable when foreseeing market applications of ILs, e.g., in "protein packaging" and "detergent applications". Future directions and other possibilities of IL-protein systems in light-harvesting and biotechnology/biomedical applications are discussed.

BODIPY-conjugated bis-terpyridine Ru(II) complexes showing ultra-long luminescence lifetimes and applications to triplet-triplet annihilation upconversion

The poor excited-state properties of bis-terpyridine Ru(II) complexes have significantly limited the applications of these complexes as sensitizers in photocatalysis and triplet-triplet annihilation upconversion. In the present work, two novel ruthenium bis-terpyridine complexes (Ru-1 and Ru-2) conjugated with visible-light-harvesting bodipy chromophores were synthesized. These complexes showed strong absorption of visible light, the bodipy-localized intraligand triplet state (³IL) was efficiently populated, and the phosphorescence of bodipy at room temperature in both complexes was observed. The luminescence lifetimes of these complexes were significantly prolonged, with that of the heteroleptic complex Ru-2 prolonged to 37.9 μs and that of the homoleptic bis-terpyridine complex Ru-1 unprecedentedly prolonged to 356 μs, which was hundreds of times longer than the current longest emissive state achieved in ruthenium terpyridine complexes. The ultra-long triplet lifetimes and strong visible-light absorbing ability made them new candidates of triplet sensitizers, and were first applied to TTA-UC for terpyridine Ru(II) complexes with a Ru-1/Py system showing a Φ_UC of 2.93% in dilute solutions at concentrations as low as 1.0 μM.

Versatile, stable, and air-tolerant triplet–triplet annihilation upconversion block copolymer micelles

A versatile, stable, and highly air-tolerant triplet–triplet annihilation up-conversion system based on block copolymer micelles was designed and fabricated.

Application of Triplet-Triplet Annihilation Upconversion in Organic Optoelectronic Devices: Advances and Perspectives

Organic semiconductor materials have been widely used in various optoelectronic devices due to their rich optical and/or electrical properties, which are highly related to their excited states. Therefore, how to manage and utilize the excited states in organic semiconductors is essential for the realization of high-performance optoelectronic devices. Triplet-triplet annihilation (TTA) upconversion is a unique process of converting two non-emissive triplet excitons to one singlet exciton with higher energy. Efficient optical-to-electrical devices can be realized by harvesting sub-bandgap photons through TTA-based upconversion. In electrical-to-optical devices, triplets generated after the combination of electrons and holes also can be efficiently utilized via TTA, which resulted in a high internal conversion efficiency of 62.5%. Currently, many interesting explorations and significant advances have been demonstrated in these fields. In this review, a comprehensive summary of these intriguing advances on developing efficient TTA upconversion materials and their application in optoelectronic devices is systematically given along with some discussions. Finally, the key challenges and perspectives of TTA upconversion systems for further improvement for optoelectronic devices and other related research directions are provided. This review hopes to provide valuable guidelines for future related research and advancement in organic optoelectronics.

CdSe nanocrystal sensitized photon upconverting film

Here, films using CdSe nanocrystal (NC) triplet photosensitizers in conjunction with diphenylanthracene (DPA) emitters were assembled to address several challenges to practical applications for solution-based photon upconversion. By using poly(9-vinylcarbazole) as a phosphorescent host in this film, volatile organic solvents are eliminated, the spontaneous crystallization of the emitter is significantly retarded, and ∼1.5% photon upconversion quantum yield (out of a maximum of 50%) is obtained. Transient absorption spectroscopy on nanosecond-to-microsecond time scales reveals this efficiency is enabled by an exceptionally long triplet lifetime of 3.4 ± 0.3 ms. Ultimately, we find the upconversion efficiency is limited by incomplete triplet–triplet annihilation, which occurs with a rate 3–4 orders of magnitude slower than in solution-phase upconversion systems.

Here, films using CdSe nanocrystal (NC) triplet photosensitizers in conjunction with diphenylanthracene (DPA) emitters doe for the conversion of green to blue light.

Bulk Transparent Photon Upconverting Films by Dispersing High-Concentration Ionic Emitters in Epoxy Resins

It remains challenging to achieve efficient and air-stable photon upconversion (UC) in rigid, technologically valuable transparent films. Here, we report the first example of epoxy resins that show an air-stable and efficient triplet-triplet annihilation (TTA)-based UC. Epoxy resins are thermally cross-linked polymers widely used as coating and sealing materials in actual devices. To achieve efficient TTA-UC in rigid epoxy films, it is essential to execute both the triplet sensitization and triplet exciton diffusion processes without relying on molecular diffusion. This requires homogeneously dispersing emitter molecules without aggregation in three-dimensionally cross-linked rigid polymer networks at a high concentration (ca. 1000 mM) such that the inter-emitter distance is less than 1 nm, where dexter energy transfer can occur. This difficult requirement is solved by employing an ionic liquid emitter that consists of 9,10-diphenylanthracene sulfonate and lipophilic phosphonium ions bearing long alkyl chains. The obtained epoxy resins show a high TTA-UC efficiency (η_UC = 3.8%) and low threshold excitation intensity (I_th = 40 mW cm^-2) in air. These UC parameters are achieved by virtue of a very high sensitizer-to-emitter triplet energy-transfer efficiency (92.8%) and a significantly long emitter triplet lifetime (17.8 ms) that reflect the high emitter concentration and the rigid chromophore environment, respectively. The bulk transparent upconverting resins can be prepared in air and function in air, which opens a new avenue toward a wide range of real-world applications.

Lipophilic Fluorescent Dye Liquids: Förster Resonance Energy Transfer-Based Fluorescence Amplification for Ion Selective Optical Sensors Based on a Solvent Polymeric Membrane

Optical sensors based on solvent polymeric membranes have the potential to measure analytes present in an aqueous solution through the development of a tailored method for a specific target. However, limits in the concentrations of the component dyes have prevented improvements in sensitivity. We propose a Förster resonance energy transfer (FRET)-based fluorescence amplification system for ion-selective optical sensors using a highly fluorescent liquid material composed of a lipophilic phosphonium cation and a pyrene modifying sulfonate anion ([P₆₆₆₁₄][HP-SO₃]), as both the plasticizer and donor, in addition to a combination of the lipophilic phosphonium cation and the fluorescein dodecyl ester anion ([P₆₆₆₁₄][12-FL]) as the fluorescent sensing dye acceptor. For ion extraction-based sensing, the donor and acceptor were retained in the plasticized PVC membrane with negligible leaching upon exposure to acidic and basic aqueous solutions. Systematic investigation of the donor and acceptor ratios clarified the effect of the amplification factor and the sensitivity of the sensor. At an acceptor doping level of 0.5 mol % (vs donor), an approximately 22-fold higher sensitivity was obtained compared to that of a conventional PVC membrane optical sensor. During ion measurement based on the coextraction of protons and anions, selectivity following the Hofmeister order was observed, which was controlled by the addition of ionophores. The proposed FRET system based on a lipophilic fluorescent liquid material has the potential to significantly improve the sensitivities of optical sensors using solvent polymeric membranes with high selectivities for various target analytes.

A redox-active ionic liquid manifesting charge-transfer interaction between a viologen and carbazole and its effect on the viscosity, ionic conductivity, and redox process of the viologen

Redox-active ionic liquids (RAILs) are gaining attention as a material that can create a wide range of functions. We herein propose a charge-transfer (CT) RAIL by mixing two RAILs, specifically a carbazole-based ionic liquid ([CzC₄ImC₁][TFSI]) as a donor and a viologen-based ionic liquid ([C₄VC₇][TFSI]₂) as an acceptor. We investigated the effect of CT interaction on the physicochemical properties of the CT ionic liquid (CT-IL) using the results of temperature-dependent measurements of UV-vis absorption, viscosity, and ionic conductivity as well as cyclic voltammograms. We employed the Walden analysis and the Grunberg–Nissan model to elucidate the effect of the CT interaction on the viscosity and ionic conductivity. The CT interaction reduces the viscosity by reducing the electrostatic attraction between the dicationic viologen and TFSI anion. It also reduces the ionic conductivity by the CT association of the dicationic viologen and carbazole. The electrochemically reversible responses of the viologens in [C₄VC₇][TFSI]₂ and CT-IL are consistent with the Nernstian and the interacting two-redox site models. Notably, the transport and electrochemical properties are modulated by CT interaction, leading to unique features that are not present in individual component ILs. The inclusion of CT interaction in RAILs thus provides a powerful means to expand the scope of functionalized ionic liquids.

A redox-active ionic liquid (RAIL) consisting of a carbazole and viologen shows charge transfer (CT) interaction. The physicochemical properties are modulated by the CT interaction by comparison with the individual RAILs.

Biamphiphilic ionic liquid based aqueous microemulsions as an efficient catalytic medium for cytochrome c

Considering the remarkable applicability of ionic liquids (ILs) in bio-catalysis involving enzymes, herein, we report new IL based aqueous microemulsions as a catalytic reactor for cytochrome c (Cyt-c). Microemulsions (μEs), comprising water as the polar component, imidazolium (cation) and dioctylsulfosuccinate (AOT) (anion) based biamphiphilic ionic liquid (BAIL) as the surfactant and a hydrophobic ionic liquid (HIL) as the non-polar component have been prepared and characterized. The use of BAIL has promoted the formation of μEs without any co-surfactant, owing to its higher surface activity. The effect of ester- or amide-functionalization of the alkyl chain of the imidazolium cation of BAILs on the phase behavior of μEs has been investigated. The prepared μEs have been characterized via conductivity, dynamic light scattering (DLS), UV-vis absorption and steady-state fluorescence (using external polarity probes) techniques. The prepared μEs have been employed as nano-reactors for exploring the catalytic activity of Cyt-c. The formed BAIL-water nano-interfaces in reverse μEs have exerted a positive effect on the catalytic activity of Cyt-c stored in a water pool of reverse μEs. A five-fold higher rate constant in μEs as compared to buffer establishes μEs as a better catalytic medium. Furthermore, the differing nature of nano-interfaces created by BAILs and water in reverse μEs, depending on the functionalization of the alkyl chain of the cationic part of BAIL, has exerted varying influence on the catalytic activity of Cyt-c. It is expected that the present work will result in providing a versatile platform for the creation of new IL and water based μEs for bio-catalytic applications.

Innate immune activation by conditioned medium of cancer cells following combined phototherapy with photosensitizer-loaded gold nanorods

Nanoparticle-based phototherapy has evolved to include immunotherapy as an effective treatment combination for cancers through inducing anti-cancer immune activation leading to downstream adaptive responses and immune protection. However, most cancer phototherapy studies that claimed anti-cancer immunogenic effects often included exogenous immunostimulants to potentiate immune responses and did not clearly establish their effects on immune cells. In this study, we showed that combined photodynamic (PDT) and photothermal therapy (PTT) using gold nanorods (NRs) loaded with the photosensitizer chlorin e6 (Ce6) on endogenously formed mouse serum (MS) protein coronas (i.e., NR-MS-Ce6) on EMT6 murine mammary carcinoma cells could potentiate the activation of both J774A.1 macrophages and DC2.4 dendritic cells. The activation of these innate immune cells by the conditioned media from cancer cells treated with combined PDT + PTT was cell-type and number dependent. While treated B16-OVA murine melanoma cells induced lower activation levels for both immune cell types compared to EMT6, they caused higher pro-inflammatory cytokine secretion levels. Our study suggests the importance of immunological investigations to complement any nanoparticle-based therapeutic interventions to better evaluate their efficacy. This could be achieved through a simple approach to screen for the first line of immune responses arising from these therapies prior to in vivo studies.

Highly Ordered 2D-Assemblies of Phase-Segregated Block Molecules for Upconverted Linearly Polarized Emission

Materials based on the laminar ordering of self-assembled molecules have a unique potential for applications requiring efficient energy migration through densely packed chromophores. Here, employing molecular assemblies of coil-rod-coil block molecules for triplet-triplet annihilation upconversion (TTA-UC) based on triplet energy migration with linearly polarized emission is reported. By covalently attaching discrete-length oligodimethylsiloxane (oDMS) to 9,10-diphenylanthracene (DPA), highly ordered 2D crystalline DPA sheets separated by oDMS layers are obtained. Transparent films of this material doped with small amounts of triplet sensitizer Pt^II octaethylporphyrin show air-stable TTA-UC under non-coherent excitation. Upon annealing, an increase in TTA-UC up to two orders of magnitude is observed originating from both an improved molecular ordering of DPA and an increased dispersion of the sensitizer. The molecular alignment in millimeter-sized domains leads to upconverted linearly polarized emission without alignment layers. By using a novel technique, upconversion imaging microscopy, the TTA-UC intensity is spatially resolved on a micrometer scale to visually demonstrate the importance of molecular dispersion of sensitizer molecules for efficient TTA-UC. The reported results are promising for anti-counterfeiting and 3D night-vision applications, but also exemplify the potential of discrete oligodimethylsiloxane functionalized chromophores for highly aligned and densely packed molecular materials.

A lipophilic ionic liquid-based dye for anion optodes: importance of dye lipophilicity and application to heparin measurement

Herein, a fully lipophilic ionic liquid (IL) comprising a lipophilic fluorescein anion and a trihexyltetradecylphosphonium cation was synthesized and used as the plasticizer for a plasticized poly(vinyl chloride) (PVC) membrane optode. Systematic investigation of the alkyl chain length of the fluorescein anion proved the significance of lipophilicity for obtaining the reversible absorbance measurements. A PVC membrane fabricated with the synthesized lipophilic IL was observed to comprise an unusually high dye concentration (915 mmol kg^-1) and exhibited good sensitivity as well as response time in its sensor performance. The sensitivity of the presented PVC membrane was 26-fold higher than that of a conventional optode membrane with the same membrane thickness and the same lipophilic dye of typical dye content (1 wt%). The response time was observed to be >120-fold faster by using a significantly thinner PVC membrane (approx. 140 nm). Heparin is known to be a polyanionic anticoagulant, and the presented PVC membrane exhibited an extremely fast response (20-150 seconds) to the heparin in diluted serum within the required concentration region. Thus, the lipophilic IL-based dye could significantly improve the sensor performance in conventional optodes, especially for an analyte showing slow diffusion, such as macromolecular heparin.

Determination of Upconversion Quantum Yields Using Charge-Transfer State Fluorescence of Heavy-Atom-Free Sensitizer as a Self-Reference

The efficiency of photon upconversion via triplet-triplet annihilation is characterized by an upconversion quantum yield (Φ_UC); however, uncertainties remain for its determination. Here, we present a new approach for the relative measurement of Φ_UC for green-to-blue upconversion using BODIPY-pyrene donor-acceptor dyad (BD1) as a heavy-atom-free triplet sensitizer. This new approach exploits broad fluorescence from a charge-transfer (CT) state of BD1, which possesses (i) a significant Stokes shift of 181 nm in dichloromethane and (ii) a comparably high CT-fluorescence quantum yield (Φ_ref = 7.0 ± 0.2%), which is independent from oxygen presence and emitter (perylene) concentration while also exhibiting a linear intensity dependence. On the basis of this, we developed an upconversion reference using the BD1 sensitizer mixed with perylene (1 × 10^-5 M/1 × 10^-4 M) in dichloromethane. With this reference system, we investigated the performance of three BODIPY donor-acceptor dyads in the upconversion process and achieved one of the highest Φ_UC of 6.9 ± 0.2% observed for heavy-atom-free sensitizers to date.

Photon Upconversion in TTA-Inducing Ionic Liquids: Pinpointing the Role of IL Nanostructured Media Using MD Simulations

The use of task-specific chromophoric ionic liquids as energy transfer media in triplet-triplet annihilation photon upconversion (TTA-UC) processes has produced several examples of systems with signifficantly enhanced performances. In this work, we use molecular dynamics simulations to probe the relation between the nanostructure of chromophoric ionic liquids and their ability to achieve high TTA-UC quantum yields. The existing atomistic and systematic force fields commonly used to model different ionic liquids are extended to include substituted anthracene moieties, thus allowing the modeling of several chromophoric ionic liquids. The simulation results show that the polar network of the ionic liquids can orient the anthracene moieties within the nonpolar domains preventing direct contacts between them but allowing orientations at the optimal distance for triplet energy migration.

Efficient Photocatalysis of Composite Films Based on Plasmon-Enhanced Triplet-Triplet Annihilation

To avoid secondary environmental pollution caused by photocatalysts in their applications, our work offers a new strategy for fabricating photocatalytic films based on plasmon-enhanced triplet-triplet annihilation upconversion (TTA-UC). Polydimethylsiloxane (PDMS) films containing platinum (II)-octaethylporphyrin and 9,10-diphenylanthracene (PtDPAP), and gold nanoparticles (AuNPs) were prepared. While graphene (G) was used as an adhesive and conductive layer, CdS nanoparticles were deposited onto the films (AuNPs-PtDPAP/G/CdS) by plasma glow discharge pretreatment. The AuNPs-PtDPAP film had an enhancement in the green-to-blue upconversion compared with the pristine PtDPAP film. CdS can utilize the AuNPs plasmon-enhanced TTA-UC photons to realize efficient photocatalytic reactions. The pseudo-first-order rate constant (k_pfo) of the optimized active and stable photocatalytic film, 0.3 AuNPs-PtDPAP/G/CdS, reached 0.294 h^-1 for tetracycline degradation under green light irradiation. Its k_pfo in decomposing tetracycline under visible light is 2.62 times higher than that of the PtDPAP/G/CdS. The reported composite films provide a strategy to improve the photocatalytic activity and promote the practical applications of nanosize photocatalysts.

Visible-to-ultraviolet (<340 nm) photon upconversion by triplet–triplet annihilation in solvents

Visible-to-UV upconversion shorter than 340 nm was achieved in organic solvents and the solvent dependent efficiency and photostability were elucidated.

Visible-to-UV Photon Upconversion in Nanostructured Chromophoric Ionic Liquids

Visible-to-ultraviolet (vis-to-UV) triplet-triplet annihilation based photon upconversion (TTA-UC) is achieved in a non-volatile chromophoric ionic liquid (IL) for the first time. A novel IL is synthesized by combining UV-emitting anion 4-(2-phenyloxazol-5-yl)benzenesulfonate (PPOS) and trihexyltetradecylphosphonium cation (P66614). The nanostructured organization of chromophoric anions is demonstrated by synchrotron X-ray and optical measurements. When the IL is doped with a triplet sensitizer tris(2-phenylpyridinato)iridium(III) (Ir(ppy)3), the visible-to-UV TTA-UC with a relatively low threshold excitation intensity of 61 mW cm-2 is achieved. This is due to a large triplet diffusion coefficient in the IL (1.4×10-7 cm2 s-1) as well as a high absorption coefficient 15 cm-1 and a long PPOS triplet lifetime of 1.55 ms, all implemented in the condensed IL system. This work demonstrates the unique potential of ILs to control chromophore arrangements for desired functions.

Annihilation Versus Excimer Formation by the Triplet Pair in Triplet-Triplet Annihilation Photon Upconversion

The triplet pair is the key functional unit in triplet-triplet annihilation photon upconversion. The same molecular properties that stabilize the triplet pair also allow dimers to form on the singlet energy surface, creating an unwanted energy relaxation pathway. Here we show that excimer formation most likely is a consequence of a triplet dimer formed before the annihilation event. Polarity-dependent studies were performed to elucidate how to promote wanted emission pathways over excimer formation. Furthermore, we show that the yield of triplet-triplet annihilation is increased in higher-viscosity solvents. The results will bring new insights in how to increase the upconversion efficiency and how to avoid energy-loss channels.

Tetraphenylethene 9,10-Diphenylanthracene Derivatives - Synthesis and Photophysical Properties

A series of tetraphenylethene 9,10-diphenylanthracene (TPE-DPA) derivatives have been synthesized, and their photophysical properties studied. Photoluminescence measurements in PMMA, neat films and nanoparticle dispersions reveal that different aggregation states are formed, which leads to different photophysical behavior. The triplet excited state properties were studied using Pt(II) octaethylporphyrin (PtOEP) as triplet sensitizer. Upconverted emission from the DPA moiety is observed in nanoparticle dispersions of each derivative. A higher upconverted emission intensity is observed in aerated (compared to deaerated) solutions of the derivatives following irradiation, which is attributed to oxidation of the TPE moiety. These results provide valuable insight for the design of AIE luminogens for triplet-triplet annihilation upconversion (TTA-UC).

Recent Progress in Photon Upconverting Gels

Recent progress in the development of gels showing triplet-triplet annihilation based photon upconversion (TTA-UC) is reviewed. Among the two families of upconverting gels reported, those display TTA-UC based on molecular diffusion show performances comparable to those in solutions, and the TTA-UC therein are affected by dissolved molecular oxygen. Meanwhile, air-stable TTA-UC is achieved in organogels and hydrogels by suitably accumulating TTA-UC chromophores which are stabilized by hydrogen bonding networks of the gelators. The unique feature of the air-stable upconverting gels is that the self-assembled nanostructures are protected from molecular oxygen dissolved in the microscopically interconnected solution phase. The presence of the bicontinuous structures formed by the upconverting fibrous nanoassemblies and the solution phase is utilized to design photochemical reaction systems induced by TTA-UC. Future challenges include in vivo applications of hydrogels showing near infrared-to-visible TTA-UC.

Red-to-blue photon up-conversion with high efficiency based on a TADF fluorescein derivative

A new photon up-conversion system with a TADF fluorescein derivative as a photosensitizer was developed to achieve a quite large anti-Stokes shift from red to blue with a fairly high up-conversion emission quantum yield.

Solid-State Photon Upconversion Materials: Structural Integrity and Triplet-Singlet Dual Energy Migration

Triplet-triplet annihilation-based photon upconversion (TTA-UC) is a process wherein longer-wavelength light (lower-energy photons) is converted into shorter-wavelength light (higher-energy photons) under low excitation intensity in multichromophore systems. There have been many reports on highly efficient TTA-UC in solution; however, significant challenges remain in the development of solid-state upconverters in order to explore real-world applications. In this Perspective, we discuss the advantages and challenges of different approaches for TTA-UC in solvent-free solid systems. We consider that the energy migration-based TTA-UC has the potential to achieve ideal materials with high UC efficiency at weak solar irradiance. While the UC performance of such systems is still limited at this moment, we introduce recently developed important concepts to improve it, including kinetic/thermodynamic donor dispersion in acceptor assemblies, defectless crystals, and triplet-singlet dual energy migration. Future integration of these concepts into a single material would realize the ideal TTA-UC system.

Simple and Versatile Platform for Air-Tolerant Photon Upconverting Hydrogels by Biopolymer-Surfactant-Chromophore Co-assembly

Exploration of triplet-triplet annihilation based photon upconversion (TTA-UC) in aqueous environments faces difficulty such as chromophores insolubility and deactivation of excited triplets by dissolved oxygen molecules. We propose a new strategy of biopolymer-surfactant-chromophore coassembly to overcome these issues. Air-stable TTA-UC with a high upconversion efficiency of 13.5% was achieved in hydrogel coassembled from gelatin, Triton X-100 and upconverting chromophores (triplet sensitizer and emitter). This is comparable to the highest UC efficiency observed to date for air-saturated aqueous UC systems. Moreover, this is the first example of air-stable TTA-UC in the form of hydrogels, widening the applicability of TTA-UC in biological applications. The keys are two-fold. First, gelatin and the surfactant self-assemble in water to give a developed hierarchical structure with hydrophobic domains which accommodate chromophores up to high concentrations. Second, thick hydrogen-bonding networks of gelatin backbone prevent O₂ inflow to the hydrophobic interior, as evidenced by long acceptor triplet lifetime of 4.9 ms. Air-stable TTA-UC was also achieved for gelatin with other nonionic surfactants (Tween 80 and Pluronic f127) and Triton X-100 with other gelling biopolymers (sodium alginate and agarose), demonstrating the versatility of current strategy.

Ratiometric nanothermometer in vivo based on triplet sensitized upconversion

Temperature is an essential factor that counts for living systems where complicated vital activities are usually temperature dependent. In vivo temperature mapping based on non-contact optical approach will be beneficial for revealing the physiological phenomena behind with minimized influence to the organism. Herein, a highly thermal-sensitive upconversion system based on triplet–triplet annihilation (TTA) mechanism is pioneered to indicate body temperature variation sensitively over the physiological temperature range. The temperature-insensitive NaYF₄: Nd nanophosphors with NIR emission was incorporated into the temperature-responsive TTA-upconversion system to serve as an internal calibration unit. Consequently, a ratiometric thermometer capable of accurately monitoring the temperature changes in vivo was developed with high thermal sensitivity (~7.1% K⁻¹) and resolution (~0.1 K).

Though luminescence imaging is a promising approach for contactless thermometry in vivo, the low thermal sensitivity of existing thermometers limits its potential. Here, the authors develop a high-sensitivity ratiometric nanothermometer based on triplet-sensitized upconversion.

Triplet-sensitized photon upconversion in deep eutectic solvents

Photon upconversion (UC) is a technology that can increase solar utilization efficiencies in broad photoenergy conversion systems by converting lower-energy photons into usable higher-energy photons. Recently, UC using triplet-triplet annihilation (TTA) of organic molecules has drawn attention because it is presently the only method applicable to weak and noncoherent light. To date, many attempts have been made to realize this UC technology in forms suitable for applications, but they typically suffer from either high cost or insufficient stability and/or safety of materials. Recently, a new class of liquid called deep eutectic solvents (DESs) has emerged as low-cost green fluids that possess low toxicity and vapor pressure, biodegradability, and high thermal stability. DESs have been proposed as an alternative to ionic liquids. This article develops triplet-sensitized UC samples using DESs that are found to be suitable solvents for this purpose, attaining a new materials platform for UC with the aforementioned advantages. The high thermal stability of the samples is qualitatively confirmed and their UC quantum yields are determined to be 0.11-0.21 (based on the definition that the maximum quantum yield is 0.5) depending on the DES composition. The triplet lifetime of the emitter 9,10-diphenylanthracene increases with DES viscosity, resulting in unique kinetics. Analysis of photophysical experimental results allows the relevant physics governing the performance of this sample system to be determined and discussed. Overall, a novel UC platform that simultaneously achieves high thermal stability, low cost, and environmental friendliness is developed using DESs as the solvent.

Anion-controlled supramolecular crystal structures and ionic liquids from fatty acid-substituted ethyl-nicotinate ionic compounds

A series of bio-inspired fatty acid-substituted ethyl-nicotinate ionic compounds with a flexible ester group were prepared, and two crystals and four ionic liquids were obtained.

Two-dimensional structural ordering in a chromophoric ionic liquid for triplet energy migration-based photon upconversion

Triplet exciton diffusion in a chromophoric ionic liquid with two-dimensional order is studied and utilized for photon upconversion.

Photocatalytic Water-Splitting Enhancement by Sub-Bandgap Photon Harvesting

Upconversion is a photon-management process especially suited to water-splitting cells that exploit wide-bandgap photocatalysts. Currently, such catalysts cannot utilize 95% of the available solar photons. We demonstrate here that the energy-conversion yield for a standard photocatalytic water-splitting device can be enhanced under solar irradiance by using a low-power upconversion system that recovers part of the unutilized incident sub-bandgap photons. The upconverter is based on a sensitized triplet-triplet annihilation mechanism (sTTA-UC) obtained in a dye-doped elastomer and boosted by a fluorescent nanocrystal/polymer composite that allows for broadband light harvesting. The complementary and tailored optical properties of these materials enable efficient upconversion at subsolar irradiance, allowing the realization of the first prototype water-splitting cell assisted by solid-state upconversion. In our proof-of concept device the increase of the performance is 3.5%, which grows to 6.3% if concentrated sunlight (10 sun) is used. Our experiments show how the sTTA-UC materials can be successfully implemented in technologically relevant devices while matching the strict requirements of clean-energy production.

Nanodroplet-Containing Polymers for Efficient Low-Power Light Upconversion

Sensitized triplet-triplet-annihilation-based photon upconversion (TTA-UC) permits the conversion of light into radiation of higher energy and involves a sequence of photophysical processes between two dyes. In contrast to other upconversion schemes, TTA-UC allows the frequency shifting of low-intensity light, which makes it particularly suitable for solar-energy harvesting technologies. High upconversion yields can be observed for low viscosity solutions of dyes; but, in solid materials, which are better suited for integration in devices, the process is usually less efficient. Here, it is shown that this problem can be solved by using transparent nanodroplet-containing polymers that consist of a continuous polymer matrix and a dispersed liquid phase containing the upconverting dyes. These materials can be accessed by a simple one-step procedure that involves the free-radical polymerization of a microemulsion of hydrophilic monomers, a lipophilic solvent, the upconverting dyes, and a surfactant. Several glassy and rubbery materials are explored and a range of dyes that enable TTA-UC in different spectral regions are utilized. The materials display upconversion efficiencies of up to ≈15%, approaching the performance of optimized oxygen-free reference solutions. The data suggest that the matrix not only serves as mechanically coherent carrier for the upconverting liquid phase, but also provides good protection from atmospheric oxygen.

Water-Dispersible Silica-Coated Upconverting Liposomes: Can a Thin Silica Layer Protect TTA-UC against Oxygen Quenching?

Light upconversion by triplet-triplet annihilation (TTA-UC) in nanoparticles has received considerable attention for bioimaging and light activation of prodrugs. However, the mechanism of TTA-UC is inherently sensitive for quenching by molecular oxygen. A potential oxygen protection strategy is the coating of TTA-UC nanoparticles with a layer of oxygen-impermeable material. In this work, we explore if (organo)silica can fulfill this protecting role. Three synthesis routes are described for preparing water-dispersible (organo)silica-coated red-to-blue upconverting liposomes. Their upconversion properties are investigated in solution and in A549 lung carcinoma cells. Although it was found that the silica offered no protection from oxygen in solution and after uptake in A549 cancer cells, upon drying of the silica-coated liposome dispersion in an excess of (organo)silica precursor, interesting liposome-silica nanocomposite materials were obtained that were capable of generating blue light upon red light excitation in air.

Nicotine-based surface active ionic liquids: Synthesis, self-assembly and cytotoxicity studies

New ester-functionalized surface active ionic liquids (SAILs) based on nicotine, [C_nENic][Br] (n=8, 10 and 12), with bromide counterions have been synthesized, characterized and investigated for their self-assembly behavior in aqueous medium. Conductivity measurements in aqueous solutions of the investigated SAILs have provided information about their critical micelle concentration (cmc), and degree of counterion binding (β), where cmc was found to be 2-3-fold lower than homologous SAILs or conventional cationic surfactants. The inherent fluorescence of SAILs in the absence of any external fluorescent probe have shed light on cmc as well as interactions prevailing between the monomers in micelle at molecular level. The thermodynamic parameters related to micellization have been deduced from isothermal titration calorimetry (ITC) and conductivity measurements. ¹H NMR, spin-lattice (T₁) relaxation time and 2D ¹H-^IH ROESY measurements have been exploited to get detailed account of internal structure of micelle. The size and shape of the micelles have been explored using dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements. The synthesized SAILs have been found to be non-cytotoxic towards C6-Glioma cell line, which adds to the possible utility of these SAILs for diverse biological applications.

Temperature Dependence of Triplet-Triplet Annihilation Upconversion in Phospholipid Membranes

Understanding the temperature dependency of triplet-triplet annihilation upconversion (TTA-UC) is important for optimizing biological applications of upconversion. Here the temperature dependency of red-to-blue TTA-UC is reported in a variety of neutral PEGylated phospholipid liposomes. In these systems a delicate balance between lateral diffusion rate of the dyes, annihilator aggregation, and sensitizer self-quenching leads to a volcano plot, with the maximum upconversion intensity occurring near the main order-disorder transition temperature of the lipid membrane.

Triplet transport in thin films: fundamentals and applications

An overview of experimental and theoretical work on triplet energy transfer, with a focus on triplet transport in thin films.

Photon Upconversion and Molecular Solar Energy Storage by Maximizing the Potential of Molecular Self-Assembly

The self-assembly of functional molecules into ordered molecular assemblies and the fulfillment of potentials unique to their nanotomesoscopic structures have been one of the central challenges in chemistry. This Feature Article provides an overview of recent progress in the field of molecular self-assembly with the focus on the triplet-triplet annihilation-based photon upconversion (TTA-UC) and supramolecular storage of photon energy. On the basis of the integration of molecular self-assembly and photon energy harvesting, triplet energy migration-based TTA-UC has been achieved in varied molecular systems. Interestingly, some molecular self-assemblies dispersed in solution or organogels revealed oxygen barrier properties, which allowed TTA-UC even under aerated conditions. The elements of molecular self-assembly were also introduced to the field of molecular solar thermal fuel, where reversible photoliquefaction of ionic crystals to ionic liquids was found to double the molecular storage capacity with the simultaneous pursuit of switching ionic conductivity. A future prospect in terms of innovating molecular self-assembly toward molecular systems chemistry is also discussed.

Red Light Activation of Ru(II) Polypyridyl Prodrugs via Triplet-Triplet Annihilation Upconversion: Feasibility in Air and through Meat

Triplet-triplet annihilation upconversion (TTA-UC) is a promising photophysical tool to shift the activation wavelength of photopharmacological compounds to the red or near-infrared wavelength domain, in which light penetrates human tissue optimally. However, TTA-UC is sensitive to dioxygen, which quenches the triplet states needed for upconversion. Here, we demonstrate not only that the sensitivity of TTA-UC liposomes to dioxygen can be circumvented by adding antioxidants, but also that this strategy is compatible with the activation of ruthenium-based chemotherapeutic compounds. First, red-to-blue upconverting liposomes were functionalized with a blue-light sensitive, membrane-anchored ruthenium polypyridyl complex, and put in solution in presence of a cocktail of antioxidants composed of ascorbic acid and glutathione. Upon red light irradiation with a medical grade 630 nm PDT laser, enough blue light was produced by TTA-UC liposomes under air to efficiently trigger full activation of the Ru-based prodrug. Then, the blue light generated by TTA-UC liposomes under red light irradiation (630 nm, 0.57 W/cm²) through different thicknesses of pork or chicken meat was measured, showing that TTA-UC still occurred even beyond 10 mm of biological tissue. Overall, the rate of activation of the ruthenium compound in TTA-UC liposomes using either blue or red light (1.6 W/cm²) through 7 mm of pork fillet were found comparable, but the blue light caused significant tissue damage, whereas red light did not. Finally, full activation of the ruthenium prodrug in TTA-UC liposomes was obtained under red light irradiation through 7 mm of pork fillet, thereby underlining the in vivo applicability of the activation-by-upconversion strategy.

Imaging Upconverting Polymersomes in Cancer Cells: Biocompatible Antioxidants Brighten Triplet-Triplet Annihilation Upconversion

Light upconversion is a very powerful tool in bioimaging as it can eliminate autofluorescence, increase imaging contrast, reduce irradiation damage, and increase excitation penetration depth in vivo. In particular, triplet-triplet annihilation upconverting (TTA-UC) nanoparticles and liposomes offer high upconversion efficiency at low excitation power. However, TTA-UC is quenched in air by oxygen, which also leads to the formation of toxic singlet oxygen. In this work, polyisobutylene-monomethyl polyethylene glycol block copolymers are synthesized and used for preparing polymersomes that upconvert red light into blue light in absence of oxygen. In addition, it is demonstrated that biocompatible antioxidants such as l-ascorbate, glutathionate, l-histidine, sulfite, trolox, or even opti-MEM medium, can be used to protect the TTA-UC process in these polymersomes resulting in red-to-blue upconversion under aerobic conditions. Most importantly, this approach is also functional in living cells. When A549 lung carcinoma cells are treated with TTA-UC polymersomes in the presence of 5 × 10^-3 m ascorbate and glutathionate, upconversion in the living cells is one order of magnitude brighter than that observed without antioxidants. These results propose a simple chemical solution to the issue of oxygen sensitivity of TTA-UC, which is of paramount importance for the technological advancement of this technique in biology.

Photon upconversion with directed emission

Photon upconversion has the potential to increase the efficiency of single bandgap solar cells beyond the Shockley Queisser limit. Efficient light management is an important point in this context. Here we demonstrate that the direction of upconverted emission can be controlled in a reversible way, by embedding anthracene derivatives together with palladium porphyrin in a liquid crystalline matrix. The system is employed in a triplet-triplet annihilation photon upconversion scheme demonstrating controlled switching of directional anti Stokes emission. Using this approach an emission ratio of 0.37 between the axial and longitudinal emission directions and a directivity of 1.52 is achieved, reasonably close to the theoretical maximal value of 2 obtained from a perfectly oriented sample. The system can be switched for multiple cycles without any visible degradation and the speed of switching is only limited by the intrinsic rate of alignment of the liquid crystalline matrix.

Unraveling Triplet Excitons Photophysics in Hyper-Cross-Linked Polymeric Nanoparticles: Toward the Next Generation of Solid-State Upconverting Materials

The technological application of sensitized upconversion based on triplet-triplet annihilation (TTA) requires the transition from systems operating in liquid solutions to solid-state materials. Here, we demonstrate that the high upconversion efficiency reported in hyper-cross-linked nanoparticles does not originate from residual mobility of the embedded dyes as it happens in soft hosts. The hyper-reticulation from one side blocks the dyes in fixed positions, but on the other one, it suppresses the nonradiative spontaneous decay of the triplet excitons, reducing intramolecular relaxations. TTA is thus enabled by an unprecedented extension of the triplet lifetime, which grants long excitons diffusion lengths by hopping among the dye framework and gives rise to high upconversion yield without any molecular displacement. This finding paves the way for the design of a new class of upconverting materials, which in principle can operate at excitation intensities even lower than those requested in liquid or in rubber hosts.

Triplet energy migration-based photon upconversion by amphiphilic molecular assemblies in aerated water

A molecular self-assembly approach is developed to resolve an outstanding issue in triplet energy migration-based photon upconversion (TEM-UC), that is, air-stable TEM-UC in water. Amphiphilic cationic acceptor (emitter) molecules self-assemble in water via hydrophobic and hydrogen bonding interactions, with which anionic donor (sensitizer) molecules are integrated through electrostatic interactions. Triplet energy is quantitatively transferred from the excited donor to the acceptor, which is followed by effective triplet energy migration among the pre-organized acceptors. It leads to TTA and concomitant UC emission in water. The dense acceptor chromophore arrays with extended hydrogen bonding networks show efficient barrier properties against molecular oxygen, as demonstrated by the stable UC emission even in air-saturated water.

Transparent and Nonflammable Ionogel Photon Upconverters and Their Solute Transport Properties

Photon upconversion based on triplet-triplet annihilation (TTA-UC) is a technology to convert presently wasted sub-bandgap photons to usable higher-energy photons. In this paper, ionogel TTA-UC samples are first developed by gelatinizing ionic liquids containing triplet-sensitizing and light-emitting molecules using an ionic gelator, resulting in transparent and nonflammable ionogel photon upconverters. The photophysical properties of the ionogel samples are then investigated, and the results suggest that the effect of gelation on the diffusion of the solutes is negligibly small. To further examine this suggestion and acquire fundamental insight into the solute transport properties of the samples, the diffusion of charge-neutral solute species over much longer distances than microscopic interpolymer distances is measured by electrochemical potential-step chronoamperometry. The results reveal that the diffusion of solute species is not affected by gelation within the tested gelator concentration range, supporting our interpretation of the initial results of the photophysical investigations. Overall, our results show that the advantage of nonfluidity can be imparted to ionic-liquid-based photon upconverters without sacrificing molecular diffusion, optical transparency, and nonflammability.

Recent emergence of photon upconversion based on triplet energy migration in molecular assemblies

This Feature Article reviews an emerging field of triplet energy migration-based photon upconversion (TEM-UC) that allows highly efficient photon upconversion at low excitation power.