End‐Group‐Functionalized Poly(α‐olefinates) as Non‐Polar Building Blocks: Self‐Assembly of Sugar–Polyolefin Hybrid Conjugates

In Situ Efficient End Functionalization of Polyisoprene by Epoxide Compounds via Neodymium-Mediated Coordinative Chain Transfer Polymerization

The Nd-mediated coordinative chain transfer polymerization (CCTP) of dienes represents one of the state-of-the-art techniques in the current synthetic rubber field. Besides having well-controlled polymerization behaviors as well as high atom economies, it also allows for the generation of highly reactive Al-capped polydienyl chain-ends, which hold great potential, yet much less explored up to date, in achieving end functionalization to mimic the structure of natural rubber. In this study, we demonstrate an efficient in situ method to realize end-functionalizing polyisoprene by introducing epoxide compounds into a CCTP system. The end functionalization efficiency was 92.7%, and the obtained polymers were systematically characterized by 1H NMR, 1H,1H-COSY NMR, DOSY NMR, and MALDI TOF. NMR studies revealed that a maximum of two EO units were introduced to the chain ends, and based on density functional theory (DFT) studies, an energy barrier of 33.3 kcal/mol was required to be overcome to open the ring of the EO monomer. Increasing the ratio of [Ip]/[Nd] resulted in gradually increased viscosities for the reaction medium and therefore gave rise to an end functionalization efficiency that decreased from 92.7% to 74.2%. The end hydroxyl group can also be readily converted to other functionalities, as confirmed by NMR spectroscopy.

Coordinative Chain Transfer and Chain Shuttling Polymerization

Coordinative chain transfer polymerization, CCTP, is a degenerative chain transfer polymerization process that has a wide range of applications. It allows a highly controlled synthesis of polyolefins, stereoregular polydienes, and stereoregular polystyrene, including (stereo)block as well as statistical copolymers thereof. It also shows a green character by allowing catalyst economy during the synthesis of such polymers. CCTP notably allows the end functionalization of both the commodity and stereoregular specialty polymers aforementionned, control of the composition of statistical copolymers without adjusting the feed, and quantitative formation of 1-alkenes from ethene. A one-pot one-step synthesis of the original multiblock microstructures and architectures by chain shuttling polymerization (CSP) is also an asset of CCTP. This methodology takes advantage of the simultaneous presence of two catalysts of different selectivity toward comonomers that produce blocks of different composition/microstructure, while still allowing the chain transfer. This affords the production of highly performant functional polymers, such as thermoplastic elastomers and adhesives, among others. This approach has been extended to cyclic esters' and ethers' ring-opening polymerization, providing new types of multiblock microstructure. The present Review provides the state of the art in the field with a focus on the last 10 years.

Synthesis of α,ω-End Functionalized Polydienes: Allylic-Bearing Heteroleptic Aluminums for Selective Alkylation and Transalkylation in Coordinative Chain Transfer Polymerization

There are still challenges in the preparation of difunctional stereoregular polydienes, especially for the construction of initiating chain-end functionalization. Coordinative chain transfer polymerization (CCTP) provides a way to achieve the goal but usually requires sophisticated functionalized catalysts as well as expensive chain transfer agents (CTAs). In this work, heteroleptic aluminum with oligo(dienyl) substituents (oligo-Al agents) were readily prepared by living anionic polymerization (LAP) technique. The oligo-Al agents used in Nd-mediated CCTPs of dienes exhibit highly selective alkylation and transalkylation features. Kinetics and transfer efficiency studies using 1 H NMR, 13 C NMR, 1 H-13 C HSQC, and Dosy NMR analyses revealed that the resulting polydienes possess substituents at the initiating chain-end that have transferred from the oligo-Al agents. The functionalization efficiency of the initiating chain-end is up to 99 %, and the molar mass regulation efficiency of heteroleptic aluminum is higher than that of the traditional CTA Ali Bu2 H (0.608 vs. 0.410). Based on the experimental results and density functional theory (DFT) calculations, we propose a mechanism in which allylic-Al acts as an efficient alkylating moiety in catalyst preformation and also as an effective transfer agent in polymerization. Taking advantage of these features, di-functionalized polyisoprene, polybutadiene, and poly(isoprene-co-butadiene) can be facilely synthesized.

The Highly Controlled and Efficient Polymerization of Ethylene

The highly controlled and efficient polymerization of ethylene is a very attractive but challenging target. Herein we report on a Coordinative Chain Transfer Polymerization catalyst, which combines a high degree of control and very high activity in ethylene oligo- or polymerization with extremely high chain transfer agent (triethylaluminum) to catalyst ratios (catalyst economy). Our Zr catalyst is long living and temperature stable. The chain length of the polyethylene products increases over time under constant ethylene feed or until a certain volume of ethylene is completely consumed to reach the expected molecular weight. Very high activities are observed if the catalyst elongates 60 000 or more alkyl chains and the polydispersity of the strictly linear polyethylene materials obtained are very low. The key for the combination of high control and efficiency seems to be a catalyst stabilized by only one strongly bound monoanionic N-ligand.

Tailoring Glass Transition Temperature in a Series of Poly(methylene-1,3-cyclopentane-stat-cyclohexane) Statistical Copolymers

A systematic investigation of the synthesis and characterization of a new class of amorphous atactic cis, trans poly(methylene-1,3-cyclopentane-stat-cyclohexane) statistical copolymers (I) is reported. Production of different grades of I that vary with respect to the ratio of 5- and 6-membered cycloalkane repeat units was achieved through the living coordinative chain transfer cyclopolymerization of different initial feed ratios of 1,5-hexadiene and 1,6-heptadiene comonomers. It was determined that the glass transition temperature, T_g, of I can be systematically increased from -16 to 100 °C as a function of increasing 6-membered ring content, although not in a strictly linear fashion. It was further determined that a small level of 6-membered ring content is sufficient to disrupt the crystallinity of the limiting atactic cis, trans poly(methylene-1,3-cyclopentane) (PMCP) homopolymer that possesses a melting temperature, T_m, of 98 °C. These results establish a foundation for future potential technological applications of this unique class of polyolefin copolymers.

Tailored Solid-State Carbohydrate Nanostructures Based on Star-Shaped Discrete Block Co-Oligomers

Carbohydrates are key building blocks for advanced functional materials owing to their biological functions and unique material properties. Here, we propose a star-shaped discrete block co-oligomer (BCO) platform to access carbohydrate nanostructures in bulk and thin-film states via the microphase separation of immiscible carbohydrate and hydrophobic blocks (maltooligosaccharides with 1-4 glucose units and solanesol, respectively). BCOs with various star-shaped architectures and saccharide volume fractions were synthesized using a modular approach. In the bulk, the BCOs self-assembled into common lamellar, cylindrical, and spherical carbohydrate microdomains as well as double gyroid, hexagonally perforated lamellar, and Fddd network morphologies with domain spacings of ∼7 nm. In thin films, long-range-ordered periodic carbohydrate microdomains were fabricated via spin coating. Such controlled spatial arrangements of functional carbohydrate moieties on the nanoscale have great application potential in biomedical and nanofabrication fields.

Fabrication of Ultrafine, Highly Ordered Nanostructures Using Carbohydrate-Inorganic Hybrid Block Copolymers

Block copolymers (BCPs) have garnered considerable interest due to their ability to form microphase-separated structures suitable for nanofabrication. For these applications, it is critical to achieve both sufficient etch selectivity and a small domain size. To meet both requirements concurrently, we propose the use of oligosaccharide and oligodimethylsiloxane as hydrophilic and etch-resistant hydrophobic inorganic blocks, respectively, to build up a novel BCP system, i.e., carbohydrate-inorganic hybrid BCP. The carbohydrate-inorganic hybrid BCPs were synthesized via a click reaction between oligodimethylsiloxane with an azido group at each chain end and propargyl-functionalized maltooligosaccharide (consisting of one, two, and three glucose units). In the bulk state, small-angle X-ray scattering revealed that these BCPs microphase separated into gyroid, asymmetric lamellar, and symmetric lamellar structures with domain-spacing ranging from 5.0 to 5.9 nm depending on the volume fraction. Additionally, we investigated microphase-separated structures in the thin film state and discovered that the BCP with the most asymmetric composition formed an ultrafine and highly oriented gyroid structure as well as in the bulk state. After reactive ion etching, the gyroid thin film was transformed into a nanoporous-structured gyroid SiO2 material, demonstrating the material's promising potential as nanotemplates.

Highly Versatile Strategy for the Production of Telechelic Polyolefins

A general and versatile synthetic strategy for producing practical quantities of a wide range of phenyl-group-terminated hetero- and homotelechelic semicrystalline polyethenes and amorphous atactic and semicrystalline isotactic poly(α-olefins) is reported. The phenyl groups serve as synthons for functionalities of additional classes of telechelic polyolefins that can be "unmasked" through simple high yielding postpolymerization reactions. A demonstration of the value of these materials as building blocks for structural classes of polyolefin-based synthetic polymers was provided by syntheses of well-defined polyolefin-polyester di- and triblock copolymers that were shown to adopt microphase-segregated nanostructured mesophases in the condensed phase.

Design of selective divalent chain transfer agent for coordinative chain transfer polymerization of ethylene and its copolymerization with butadiene

PhMg(CH2)5MgPh and MesMg(CH2)5MgMes – divalent bis-metalated chain transfer agents (CTA) – were designed, synthesized and implemented in the polymerization of ethylene or the copolymerization of ethylene with butadiene mediated by...

Ordered Microdomain Structures in Saccharide-Polystyrene-Saccharide Hybrid Conjugates

Hybrid conjugates consist of synthetic polymers and naturally occurring saccharides, and are capable of microphase separation at small molecular weights to form ordered domain structures. In this study, we synthesize ABA triblock-like conjugates with polystyrene as the synthetic mid-segment and either trisaccharide maltotriose (MT) or disaccharide maltose (Mal) as the end unit. Hybrid conjugates of varying compositions are prepared by a combination of atom transfer radical polymerization and a click reaction, and their morphologies are examined by small-angle X-ray scattering and transmission electron microscopy. The MT-containing conjugates are found to form well-ordered domain structures with a sub-10 nm periodicity, and morphology transition from cylinders to spheres to disordered spheres is observed with decreasing saccharide weight fraction. The Mal-containing conjugates also show microphase separation. However, the observed domain morphologies lack regular packing due to the close proximity of polymer glass transition temperature and order-disorder transition temperature. The saccharide-containing conjugates are also found to undergo an irreversible morphology change at high temperatures, attributed to saccharide dehydration-induced pentablock-like structure formation.

Temporal Control over Two- and Three-State Living Coordinative Chain Transfer Polymerization for Modulating the Molecular Weight Distribution Profile of Polyolefins

A highly versatile new strategy for manipulating the molecular weight profiles, including breadth, asymmetry (skewness) and modal nature (mono-, bi-, and multimodal), of a variety of different polyolefins is reported. It involves temporal control over two- and three-state living coordinative chain transfer polymerization (LCCTP) of olefins in a programmable way. By changing the identity of the R' groups of the chain transfer agent, ER'_n , with time, different populations of chains within a bi- or multimodal polyolefin product can be selectively tagged with different end-groups. By changing the nature of the main-group metal of the CTA, programmed manipulation of the relative magnitudes of the dispersities of the different maxima that make up the final MWD profile can be achieved. This strategy can be implemented with existing LCCTP materials and conventional reactor methods to provide access to scalable and practical quantities of an unlimited array of new polyolefin materials.

Rapid access to discrete and monodisperse block co-oligomers from sugar and terpenoid toward ultrasmall periodic nanostructures

Discrete block co-oligomers (BCOs) are gaining considerable attention due to their potential to form highly ordered ultrasmall nanostructures suitable for lithographic templates. However, laborious synthetic routes present a major hurdle to the practical application. Herein, we report a readily available discrete BCO system that is capable of forming various self-assembled nanostructures with ultrasmall periodicity. Click coupling of propargyl-functionalized sugars (containing 1-7 glucose units) and azido-functionalized terpenoids (containing 3, 4, and 9 isoprene units) afforded the discrete and monodisperse BCOs with a desired total degree of polymerization and block ratio. These BCOs microphase separated into lamellar, gyroid, and cylindrical morphologies with the domain spacing (d) of 4.2-7.5 nm. Considering easy synthesis and rich phase behavior, presented BCO systems could be highly promising for application to diverse ~4-nm nanofabrications.

Polystyrene Chain Growth Initiated from Dialkylzinc for Synthesis of Polyolefin-Polystyrene Block Copolymers

Polyolefins (POs) are the most abundant polymers. However, synthesis of PO-based block copolymers has only rarely been achieved. We aimed to synthesize various PO-based block copolymers by coordinative chain transfer polymerization (CCTP) followed by anionic polymerization in one-pot via conversion of the CCTP product (polyolefinyl)2Zn to polyolefinyl-Li. The addition of 2 equiv t-BuLi to (1-octyl)2Zn (a model compound of (polyolefinyl)2Zn) and selective removal or decomposition of (tBu)2Zn by evacuation or heating at 130 °C afforded 1-octyl-Li. Attempts to convert (polyolefinyl)2Zn to polyolefinyl-Li were unsuccessful. However, polystyrene (PS) chains were efficiently grown from (polyolefinyl)2Zn; the addition of styrene monomers after treatment with t-BuLi and pentamethyldiethylenetriamine (PMDTA) in the presence of residual olefin monomers afforded PO-block-PSs. Organolithium species that might be generated in the pot of t-BuLi, PMDTA, and olefin monomers, i.e., [Me2NCH2CH2N(Me)CH2CH2N(Me)CH2Li, Me2NCH2CH2N(Me)Li·(PMDTA), pentylallyl-Li⋅(PMDTA)], as well as PhLi⋅(PMDTA), were screened as initiators to grow PS chains from (1-hexyl)2Zn, as well as from (polyolefinyl)2Zn. Pentylallyl-Li⋅(PMDTA) was the best initiator. The Mn values increased substantially after the styrene polymerization with some generation of homo-PSs (27-29%). The Mn values of the extracted homo-PS suggested that PS chains were grown mainly from polyolefinyl groups in [(polyolefinyl)2(pentylallyl)Zn]-[Li⋅(PMDTA)]+ formed by pentylallyl-Li⋅(PMDTA) acting onto (polyolefinyl)2Zn.

An Exceptionally Stable and Scalable Sugar-Polyolefin Frank-Kasper A15 Phase

"One-component" soft material Frank-Kasper (FK) phases are an intriguing structural form of matter that possess periodically ordered structures arising from the self-reconfiguration and close packing of an initial assembly of identical "deformable" spheres into two or more size- or shape-distinct sets of particles. Significant challenges that must still be addressed to advance the field of soft matter FK phases further, however, include their rare and unpredictable occurrence, uncertain mechanisms of solid-state assembly, and low thermodynamic stability. Here we show that a readily-accessible sugar-polyolefin conjugate quantitatively produces an exceptionally stable solid-state FK A15 phase through a rapid and irreversible thermotropic order-order transition, which contrary to other prevailing proposed mechanisms, does not require mass transfer between particles or large structural reorganization in the bulk to establish unit cell non-equivalency. Our results provide the basis for a realistic strategy for obtaining practical and scalable quantities of a diverse range of sugar-polyolefin FK A15 phases with unique intrinsic physical properties and chemical reactivities not previously seen in such systems.

Self-assembly of copper-free maltoheptaose-block-polystyrene nanostructured thin films in real and reciprocal space

The promising carbohydrate-based block copolymer maltoheptaose-block-polystyrene (MH-b-PS) has been used for high-performance memory transistors and next generation nanolithography. In order to realize the potential of MH-b-PS especially in microelectronic applications, we firstly improved its synthetic method for obtaining large amount of copper-free MH-b-PS. The main improvement relies on the removal of the residual copper catalyst by using a chelating resin. Then, the microphase separation of copper-free MH-b-PS in both thin film and bulk states under different solvent vapor annealing conditions were investigated comprehensively and compared with our previous report by using both real-space and reciprocal-space techniques. A phase transition of MH-b-PS from hexagonal close-packed horizontal cylinders to face-centered cubic were observed when increasing the amount of tetrahydrofuran in the mixture annealing solvent of tetrahydrofuran and H₂O. More details about self-assembled MH-b-PS nanostructures were analyzed by comparing grazing incidence small angle X-ray scattering patterns with corresponding atomic force microscopy phase images.

Monofunctional and Telechelic Polyethylenes Carrying Phosphonic Acid End Groups

Monofunctional or telechelic polyethylenes (PEs) carrying phosphonic acid end groups are obtained from functional PE produced by catalyzed chain growth (CCG) on magnesium. CCG is first used to produce iodo-end-functionalized PE (PE-I) that is efficiently turned into phosphonate end-functionalized PE (PE-P(O)(OEt)₂ ) in the presence of triethylphosphite through the Michaelis-Arbuzov reaction. A simple treatment of the resulting PE-P(O)(OEt)₂ with bromotrimethylsilane leads to the targeted phosphonic acid end-functionalized PE (PE-P(O)(OH)₂ ) for the first time. Vinyl-end-functionalized analogs (Vin-PE-P(O)(OEt)₂ ) are produced using vinyl-end-functionalized PE-I (Vin-PE-I) recently obtained through CCG. A cross-metathesis reaction is then employed to couple Vin-PE-P(O)(OEt)₂ and produce after treatment with bromotrimethylsilane the corresponding unprecedented α-ω-(diphosphonic acid) telechelic PE ((OH)₂ (O)P-PE-P(O)(OH)₂ ).

Controlled Radical Polymerization of Ethylene Using Organotellurium Compounds

The first successfully controlled radical polymerization (CRP) of ethylene is reported using several organotellurium chain-transfer agents (CTAs) under mild conditions (70 °C, 200 bar of ethylene) within the concept of organotellurium-mediated radical polymerization (TERP). In contrast to preceding works on CRPs of ethylene applying reversible addition-fragmentation chain-transfer (RAFT), the TERP system provided a high livingness and chain-end functionalization of polyethylene chains. Molar-mass distributions with dispersities between 1.3 and 2.1 were obtained up to average molar masses of 5000 g mol^-1 . As in the RAFT system, the high reactivity of the growing polyethylenyl radical led to an inherent side reaction. For the presented TERP systems, however, this side reaction did not result in dead chains, while it could even be effectively suppressed by a good choice of the CTA.

Polystyrene Chain Growth from Di-End-Functional Polyolefins for Polystyrene-Polyolefin-Polystyrene Block Copolymers

Triblock copolymers of polystyrene (PS) and a polyolefin (PO), e.g., PS-block-poly(ethylene-co-1-butene)-block-PS (SEBS), are attractive materials for use as thermoplastic elastomers and are produced commercially by a two-step process that involves the costly hydrogenation of PS-block-polybutadiene-block-PS. We herein report a one-pot strategy for attaching PS chains to both ends of PO chains to construct PS-block-PO-block-PS directly from olefin and styrene monomers. Dialkylzinc compound containing styrene moieties ((CH₂=CHC₆H₄CH₂CH₂)₂Zn) was prepared, from which poly(ethylene-co-propylene) chains were grown via "coordinative chain transfer polymerization" using the pyridylaminohafnium catalyst to afford di-end functional PO chains functionalized with styrene and Zn moieties. Subsequently, PS chains were attached at both ends of the PO chains by introduction of styrene monomers in addition to the anionic initiator Me₃SiCH₂Li·(pmdeta) (pmdeta = pentamethyldiethylenetriamine). We found that the fraction of the extracted PS homopolymer was low (~20%) and that molecular weights were evidently increased after the styrene polymerization (ΔM_n = 27⁻54 kDa). Transmission electron microscopy showed spherical and wormlike PS domains measuring several tens of nm segregated within the PO matrix. Optimal tensile properties were observed for the sample containing a propylene mole fraction of 0.25 and a styrene content of 33%. Finally, in the cyclic tensile test, the prepared copolymers exhibited thermoplastic elastomeric properties with no breakage up over 10 cycles, which is comparable to the behavior of commercial-grade SEBS.

Carbohydrate-Based Block Copolymer Thin Films: Ultrafast Nano-Organization with 7 nm Resolution Using Microwave Energy

Block copolymers (BCP) can self-assemble into nanoscale patterns with a wide variety of applications in the semiconductor industry. The self-assembly of BCPs is commonly accomplished by solvent vapor or thermal annealing, but generally these methods require long time (few hours) to obtain nanostructured thin films. In this contribution, a new and ultrafast method (using microwaves) is proposed-high temperature solvent vapor annealing (HTSVA), combining solvent vapor annealing with thermal annealing, to achieve fast and controllable self-assembly of amphiphilic BCP thin films. A promising carbohydrate-based BCP capable of forming cylindrical patterns with some of the smallest feature sizes is used for demonstrating how to obtain a highly ordered vertical cylindrical pattern with sub-10 nm feature sizes in few seconds by HTSVA. HTSVA provides not only a simple way to achieve BCP fast self-assembly in practical applications but also a tool to study the self-assembly behavior of BCPs under extreme conditions.

Preparation of polystyrene–polyolefin multiblock copolymers by sequential coordination and anionic polymerization

The polyolefin and polystyrene chains were successively grown from [4-(isopropenyl)benzyl]₂Zn to form polystyrene-b-polyolefin-b-polystyrene units.

Iterative Exponential Growth Synthesis and Assembly of Uniform Diblock Copolymers

Studies on the phase segregation of unimolecular block copolymers (BCPs) are limited by a lack of reliable, versatile methods for the synthesis of such polymers on the preparative scale. Herein, we describe an advancement of Iterative Exponential Growth (IEG) wherein chiral allyl-based IEG oligomers are subjected to thiol-ene reactions and converted into unimolecular BCPs. With this strategy we have synthesized uniform BCPs with molar masses up to 12.1 kDa on ∼1 g scale. BCPs composed of decane-based side chains and either triethyleneglycol- or thioglycerol-based side chains phase-segregate into hexagonal cylinder morphologies. The assembly is not driven by side-chain crystallization, but is instead the result of amorphous BCP assembly.