Structural Design Principle of Small-Molecule Organic Semiconductors for Metal-Free, Visible-Light-Promoted Photocatalysis

Helicene Appended Benzothiadiazoles as Chiral Emitters

A homologous series of 4,7-bis(aryl) substituted benzothiadiazole (BTD) compounds, containing the helicenic derivatives bis([4]helicene), bis([5]helicene) and bis([6]helicene), have been prepared upon a double Suzuki coupling between 3,6-bis(pinacolyl-borane)-BTD and the corresponding bromo-aryl precursors. The single crystal X-ray structure of the bis([4]helicene) compound shows the existence of both helicities (M) and (P) on the same molecule. All the compounds of the series are highly emissive in solution, with quantum yields of the emission ranging from 50 to 91 %. The enantiopure compounds (M,M) and (P,P) for the BTD-bis([6]helicene) have been prepared from the corresponding enantiopure 2-bromo-[6]helicene precursors. Their chiroptical properties have been investigated in correlation with density functional theory (DFT) calculations, which allowed to confidently assign the absolute configuration of the helicene arms and to characterize the different electronic transitions, including the low energy charge transfer excitation from helicenes to BTD. The enantiomerically pure fluorophores (M,M)- and (P,P)-BTD-bis([6]helicene), which exist in solution as two main conformers, according to the DFT calculations, show CPL activity in solution, with glum factors of ≈1.7×10-3 at λem=525 nm, and also in the solid state, with glum factors of ≈1.2×10-3 in spite of the strong decrease of the quantum efficiency.

Eosin Y-catalyzed reductive homocoupling of para-quinone methides under visible-light

In this manuscript, we demonstrate a visible-light driven dimerization of para-quinone methides using eosin Y catalyst via a reductive homocoupling process. This mild and operationally simple methodology was found to be compatible with a variety of differently substituted para-quinone methides and a broad range of tetra-arylethane derivatives were obtained in moderate to good yields (47%-87%).

UV-to-NIR Harvesting Conjugated Porous Polymer Nanocomposite: Upconversion and Plasmon Expedited Thioether Photooxidation

Photocatalysts capable of harvesting a broad range of the solar spectrum are essential for sustainable chemical transformations and environmental remediation. Herein, we have integrated NIR-absorbing upconversion nanoparticles (UCNP) with UV-Vis absorbing conjugated porous organic polymer (POP) through the in situ multicomponent C-C coupling to fabricate a UC-POP nanocomposite. The light-harvesting ability of UC-POP is further augmented by loading plasmonic gold nanoparticles (AuNP) into UC-POP. A three-times enhancement in the upconversion luminescence is observed upon the incorporation of AuNP in UC-POP, subsequently boosting the photocatalytic activity of UC-POP-Au. The spectroscopic and photoelectrochemical investigations infer the enhanced photocatalytic oxidation of thioethers, including mustard gas simulant by UC-POP-Au compared to POP and UC-POP due to the facile electron-hole pair generation, suppressed exciton recombination, and efficient charge carrier migration. Thus, the unique design strategy of combining plasmonic and upconversion nanoparticles with a conjugated porous organic polymer opens up new vistas towards artificial light harvesting.

3D-Printed Organic Conjugated Trimer for Visible-Light-Driven Photocatalytic Applications

Small molecule organic semiconductors (SMOSs) have emerged as a new class of photocatalysts that exhibit visible light absorption, tunable bandgap, good dispersion, and solubility. However, the recovery and reusability of such SMOSs in consecutive photocatalytic reactions is challenging. This work concerns a 3D-printed hierarchical porous structure based on an organic conjugated trimer, named EBE. Upon manufacturing, the photophysical and chemical properties of the organic semiconductor are maintained. The 3D-printed EBE photocatalyst shows a longer lifetime (11.7 ns) compared to the powder-state EBE (1.4 ns). This result indicates a microenvironment effect of the solvent (acetone), a better dispersion of the catalyst in the sample, and reduced intermolecular π-π stacking, which results in improved separation of the photogenerated charge carriers. As a proof-of-concept, the photocatalytic activity of the 3D-printed EBE catalyst is evaluated for water treatment and hydrogen production under sun-like irradiation. The resulting degradation efficiencies and hydrogen generation rates are higher than those reported for the state-of-the-art 3D-printed photocatalytic structures based on inorganic semiconductors. The photocatalytic mechanism is further investigated, and the results suggest that hydroxyl radicals (HO⋅) are the main reactive radicals responsible for the degradation of organic pollutants. Moreover, the recyclability of the EBE-3D photocatalyst is demonstrated in up to 5 uses. Overall, these results indicate the great potential of this 3D-printed organic conjugated trimer for photocatalytic applications.

pH-Triggered Recovery of Organic Polymer Photocatalytic Particles for the Production of High Value Compounds and Enhanced Recyclability

Pseudo-homogeneous polymeric photocatalysts are an emerging class of highly efficient and tunable photocatalytic materials, where the photocatalytic centers are easily accessible. The creation of highly efficient photocatalytic materials that can be rapidly separated and recovered is one of the critical challenges in photocatalytic chemistry. Here, we describe pH-responsive photocatalytic nanoparticles that are active and well-dispersed under acidic conditions but aggregate instantly upon elevation of pH, enabling easy recovery. These responsive photocatalytic polymers can be used in various photocatalytic transformations, including Cr^VI reduction and photoredox alkylation of indole derivative. Notably, the cationic nature of the photocatalyst accelerates reaction rate of an anionic substrate compared to uncharged species. These photocatalytic particles could be readily recycled allowing multiple successive photocatalytic reactions with no clear loss in activity.

Tunable Photocatalytic Selectivity by Altering the Active Center Microenvironment of an Organic Polymer Photocatalyst

The favored production of one product over another is a major challenge in synthetic chemistry, reducing the formation of byproducts and enhancing atom efficacy. The formation of catalytic species that have differing reactivities based on the substrate being converted, has been targeted to selectively control reactions. Here, we report the production of photocatalytic self-assembled amphiphilic polymers, with either hydrophilic or hydrophobic microenvironments at the reactive center. Benzothiadiazole-based photocatalysts were polymerized into either the hydrophilic or the hydrophobic compartment of a diblock copolymer by RAFT polymerization. The difference in the reactivity of each microenvironment was dictated by the physical properties of the substrate. Stark differences in reactivity were observed for polar substrates, where a hydrophilic microenvironment was favored. Conversely, both microenvironments performed similarly for very hydrophobic substrates, showing that reagent partitioning is not the only factor that drives photocatalytic conversion. Furthermore, the use of secondary swelling solvents allowed an additional reagent exchange between the continuous phase and the heterogeneous photocatalyst, resulting in a significant 5-fold increase in conversion for a radical carbon-carbon coupling.

Chemodivergent photocatalytic access to 1-pyrrolines and 1-tetralones involving switchable C(sp3)–H functionalization

A chemodivergent photocatalytic approach to 1-pyrrolines and 1-tetralones from alkyl bromides and vinyl azides has been developed through chemoselectively controllable intermolecular [3 + 2] and [4 + 2] cyclization. This photoredox-neutral two-component protocol involves intermolecular radical addition and switchable distal C(sp³)–H functionalization enabled by iminyl radical-mediated 1,5-hydrogen atom transfer. Meanwhile, chemoselectivity between C(sp³)–N bond formation and C(sp³)–C(sp²) bond formation is precisely switched by photocatalysts (Ru(bpy)₃(PF₆)₂ vs. fac-Ir(ppy)₃) and additives (base vs. acid).

A low-polarity small organic molecule with a stable keto form for photocatalytic H2 evolution

Five small organic molecules (SOMs) with different degrees of enol to keto tautomerism were synthesized for photocatalytic H₂ evolution. The SOM possessing the highest activity features a stable keto form that greatly facilitates the flowing of the excited electrons toward the carbonyl O site where the reduction reaction occurs.

Halogen-Bonding-Promoted C-H Malonylation of Indoles under Visible-Light Irradiation

Herein, we report a halogen-bonding-based electron donor-acceptor (EDA) complex-promoted photoreaction for the synthesis of C2-malonylated indoles. The protocol provides access to a broad range of functionalized indoles in good yields through the coupling reaction of indoles with diethyl bromomalonate under visible-light irradiation without the need for any transition-metal catalyst or photocatalyst.

Red edge effect and chromoselective photocatalysis with amorphous covalent triazine-based frameworks

Chromoselective photocatalysis offers an intriguing opportunity to enable a specific reaction pathway out of a potentially possible multiplicity for a given substrate by using a sensitizer that converts the energy of incident photon into the redox potential of the corresponding magnitude. Several sensitizers possessing different discrete redox potentials (high/low) upon excitation with photons of specific wavelength (short/long) have been reported. Herein, we report design of molecular structures of two-dimensional amorphous covalent triazine-based frameworks (CTFs) possessing intraband states close to the valence band with strong red edge effect (REE). REE enables generation of a continuum of excited sites characterized by their own redox potentials, with the magnitude proportional to the wavelength of incident photons. Separation of charge carriers in such materials depends strongly on the wavelength of incident light and is the primary parameter that defines efficacy of the materials in photocatalytic bromination of electron rich aromatic compounds. In dual Ni-photocatalysis, excitation of electrons from the intraband states to the conduction band of the CTF with 625 nm photons enables selective formation of C‒N cross-coupling products from arylhalides and pyrrolidine, while an undesirable dehalogenation process is completely suppressed.

2-Alkylation of 3-Alkyindoles With Unactivated Alkenes

An acid-catalyzed 2-alkylation of indole molecules is developed. Only catalytic amount of the commercially available, inexpensive and traceless HI is used as the sole reaction promoter. 2,3-Disubstituted indole molecules bearing congested tertiary carbon centers are afforded as the final products in moderate to excellent yields.

Porous organic polymers for light-driven organic transformations

As a new generation of porous materials, porous organic polymers (POPs), have recently emerged as a powerful platform of heterogeneous photocatalysis. POPs are constructed using extensive organic synthesis methodologies, with various functional organic units being connected via high-energy covalent bonds. This review systematically presents the recent advances in POPs for visible-light driven organic transformations. Herein, we firstly summarize the common construction strategies for POP-based photocatalysts based on two major approaches: pre-design and post-modification; secondly, we categorize and summarize the synthesis methods and organic reaction types for constructing various types of POPs. We then classify and introduce the specific reactions of current light-driven POP-mediated organic transformations. Finally, we outline the current state of development and the problems faced in light-driven organic transformations by POPs, and we present some perspectives to motivate the reader to explore solutions to these problems and confront the present challenges in the development process.

A simple approach to C3-ethoxycarbonylmethylation of thiophenes/furans with diethyl bromomalonate

A mild and efficient method to produce C3-malonated products was developed via a visible-light-induced radical reaction of 2-substituted thiophenes/furans with diethyl bromomalonate. The C3-ethoxycarbonylmethylation of 2-substituted thiophenes/furans exhibited broad substrate...

Dibromo-BODIPY as an Organic Photocatalyst for Radical-Ionic Sequences

A new dibrominated 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) is reported as a new metal-free photocatalyst. This BODIPY showed similar optoelectronic, electrochemical, and performance properties to those of Ru(bpy)₃Cl₂, one of the most common photocatalysts in a known radical-ionic transformation, such as the formation of 1,4-dicarbonyl compounds. Moreover, additional sequences in which the generated oxonium ion is trapped by an internal nucleophile were developed using this BODIPY photocatalyst. These new sequences allowed the straightforward preparation of γ-alkoxylactones, monoprotected 1,4-ketoaldehydes, and dihydrofurans. This new catalyst, the methodology, and the forged functional groups could be important tools in organic synthesis.

Metal-Free Photoredox-Catalyzed Hydrodefluorination of Fluoroarenes Utilizing Amide Solvent as Reductant

A metal-free photoredox-catalyzed hydrodefluorination of fluoroarenes was achieved by using N,N,N',N'-tetramethyl-para-phenylenediamine (1) as a strong photoreduction catalyst. This reaction was applicable not only to electron-rich monofluoroarenes but also to polyfluoroarenes to afford non-fluorinated arenes. The experimental mechanistic studies indicated that the amide solvent NMP plays an important role for regeneration of the photocatalyst, enabling additive-free photoreduction catalysis.

Photocontrolled RAFT Polymerization Catalyzed by Conjugated Polymers under Aerobic Aqueous Conditions

Photocontrolled polymerization offers a convenient way to direct the reaction progress and tailor the polymer structures. Nevertheless, conjugated polymers are yet to be utilized as the photocatalyst in associated reactions. Herein, we employed poly(boron dipyrromethene-alt-fluorene) (PBF), a conjugated polymer with better photostability than eosin Y, as the photocatalyst for photo-RAFT polymerizations of acrylic monomers, and the polymers were obtained with moderately narrow molecular weight distributions. The reaction progress was effectively controlled by switching irradiation conditions, and the block copolymers were prepared from chain extension of a macroinitiator. As electron spin resonance (ESR) and optical spectra results suggested, the reductive quenching of PBF* by ascorbate was the key step leading to the reduction of a chain transfer agent (CTA), whereas the hydroxyl radical derived from superoxide was considered as a byproduct of deoxygenation.

New Approach in the Application of Conjugated Polymers: The Light-Activated Source of Versatile Singlet Oxygen Molecule

For many years, the research on conjugated polymers (CPs) has been mainly focused on their application in organic electronics. Recent works, however, show that due to the unique optical and photophysical properties of CPs, such as high absorption in UV–Vis or even near-infrared (NIR) region and efficient intra-/intermolecular energy transfer, which can be relatively easily optimized, CPs can be considered as an effective light-activated source of versatile and highly reactive singlet oxygen for medical or catalytic use. The aim of this short review is to present the novel possibilities that lie dormant in those exceptional polymers with the extended system of π-conjugated bonds.

Electric-Field-Mediated Electron Tunneling of Supramolecular Naphthalimide Nanostructures for Biomimetic H2 Production

The design and synthesis of two semiconducting bis (4-ethynyl-bridging 1, 8-naphthalimide) bolaamphiphiles (BENI-COO^- and BENI-NH₃ ⁺ ) to fabricate supramolecular metal-insulator-semiconductor (MIS) nanostructures for biomimetic hydrogen evolution under visible light irradiation is presented. A H₂ evolution rate of ca. 3.12 mmol g^-1 ⋅h^-1 and an apparent quantum efficiency (AQE) of ca. 1.63 % at 400 nm were achieved over the BENI-COO^- -NH₃ ⁺ -Ni MIS photosystem prepared by electrostatic self-assembly of BENI-COO^- with the opposite-charged DuBois-Ni catalysts. The hot electrons of photoexcited BENI-COO^- nanofibers were tunneled to the molecular Ni collectors across a salt bridge and an alkyl region of 2.2-2.5 nm length at a rate of 6.10×10⁸  s^-1 , which is five times larger than the BENI-NH₃ ⁺ nanoribbons (1.17×10⁸  s^-1 ). The electric field benefited significantly the electron tunneling dynamics and compensated the charge-separated states insufficient in the BENI-COO^- nanofibers.

A three-component iodine-catalyzed oxidative coupling reaction: a heterodifunctionalization of 3-methylindoles

A metal-free method for the synthesis of heterodifunctional indole derivatives is developed through TBHP/KI-mediated oxidative coupling. The reaction constructs C-O and C-C bonds in succession with the help of tert-butyl peroxy radicals generated by the TBHP/KI catalytic system, enabling the direct realization of the heterodifunctionalization of indole in one pot. The product of this reaction is a novel heterodifunctional compound. This work might provide a new effective method for the synthesis of polycyclic indole compounds.

Emerging Concepts in Carbon Nitride Organic Photocatalysis

Carbon nitrides encompass a class of transition-metal-free materials possessing numerous advantages such as low cost (few Euros per gram), high chemical stability, broad tunability of redox potentials and optical bandgap, recyclability, and a high absorption coefficient (>10⁵  cm^-1 ), which make them highly attractive for application in photoredox catalysis. In this Review, we classify carbon nitrides based on their unique properties, structure, and redox potentials. We summarize recently emerging concepts in heterogeneous carbon nitride photocatalysis, with an emphasis on the synthesis of organic compounds: 1) Illumination-Driven Electron Accumulation in Semiconductors and Exploitation (IDEASE); 2) singlet-triplet intersystem crossing in carbon nitride excited states and related energy transfer; 3) architectures of flow photoreactors; and 4) dual metal/carbon nitride photocatalysis. The objective of this Review is to provide a detailed overview regarding innovative research in carbon nitride photocatalysis focusing on these topics.

Preparation and Photoluminescent Properties of Three 5-Amino Benzothiadiazoles (5-amBTDs)

Three D-A compounds were designed and synthesized based on a benzothiadiazole acceptor. Azepane (AP), iminodubenzyl (IDB) and iminostilbene (ISB) were used, respectively, as donors and installed on the 5-position of BTD to afford 1, 2 and 3, respectively. Their photophysical properties in different states (solution, film, crystal, and powder) are systematically investigated. Among them, AIE-active compounds 2 and 3 were found to have good sensitivity toward viscosity and display quite good linear relationship with an increase in viscosity. Compound 2 displayed dual emission in solutions which largely depended on the polarity of the solvent. Meanwhile, compound 2 exhibits a mechanochromic character with disappearance and reappearance of a dual-emissive peak induced by mechanical grinding and solvent fuming. Furthermore, these three compounds can be used in the fabrication of blue OLED devices.

Revisiting the Limiting Factors for Overall Water-Splitting on Organic Photocatalysts

In pursuit of inexpensive and earth abundant photocatalysts for solar hydrogen production from water, conjugated polymers have shown potential to be a viable alternative to widely used inorganic counterparts. The photocatalytic performance of polymeric photocatalysts, however, is very poor in comparison to that of inorganic photocatalysts. Most of the organic photocatalysts are active in hydrogen production only when a sacrificial electron donor (SED) is added into the solution, and their high performances often rely on presence of noble metal co-catalyst (e.g. Pt). For pursuing a carbon neutral and cost-effective green hydrogen production, unassisted hydrogen production solely from water is one of the critical requirements to translate a mere bench-top research interest into the real world applications. Although this is a generic problem for both inorganic and organic types of photocatalysts, organic photocatalysts are mostly investigated in the half-reaction, and have so far shown limited success in hydrogen production from overall water-splitting. To make progress, this article exclusively discusses critical factors that are limiting the overall water-splitting in organic photocatalysts. Additionally, we also have extended the discussion to issues related to stability, accurate reporting of the hydrogen production as well as challenges to be resolved to reach 10 % STH (solar-to-hydrogen) conversion efficiency.

Pushing the boundaries of C–H bond functionalization chemistry using flow technology

C–H functionalization chemistry is one of the most vibrant research areas within synthetic organic chemistry. While most researchers focus on the development of small-scale batch-type transformations, more recently such transformations have been carried out in flow reactors to explore new chemical space, to boost reactivity or to enable scalability of this important reaction class. Herein, an up-to-date overview of C–H bond functionalization reactions carried out in continuous-flow microreactors is presented. A comprehensive overview of reactions which establish the formal conversion of a C–H bond into carbon–carbon or carbon–heteroatom bonds is provided; this includes metal-assisted C–H bond cleavages, hydrogen atom transfer reactions and C–H bond functionalizations which involve an SE-type process to aromatic or olefinic systems. Particular focus is devoted to showcase the advantages of flow processing to enhance C–H bond functionalization chemistry. Consequently, it is our hope that this review will serve as a guide to inspire researchers to push the boundaries of C–H functionalization chemistry using flow technology.

Structure–activity relationships in well-defined conjugated oligomer photocatalysts for hydrogen production from water

Oligomer chain length and backbone twisting were found to have a strong effect on optoelectronic properties but a trimer of dibenzo[b,d]thiophene sulfone was found to have high photocatalytic activity approaching that of its polymer analogue.

Photochemical α-carboxyalkylation of tryptophols and tryptamines via C–H functionalization

A process for the α-carboxyalkylation of tryptophols and tryptamines by the functionalization of C–H bonds under visible light irradiation has been developed.

The Effect of Acceptor Structure on Emission Color Tuning in Organic Semiconductors with D-π-A-π-D Structures

A series of novel donor-acceptor D-π-A-π-D compounds were synthesized and characterized in order to determine the influence of different acceptor units on their properties. The introduction of acceptor moieties had a direct impact on the HOMO and LUMO energy levels. Fluorescence spectra of compounds can be changed by the choice of an appropriate acceptor and were shifted from the green to the near-infrared part of spectra. Due to observed concentration induced emission quenching, the green exciplex type host was used to evaluate the potential of synthesized molecules as emitters in organic light emitting diodes (OLEDs).

PET-RAFT Polymerization Catalyzed by Small Organic Molecule under Green Light Irradiation

Photocatalyzed polymerization using organic molecules as catalysts has attracted broad interest because of its easy operation in ambient environments and low toxicity compared with metallic catalysts. In this work, we reported that 4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (DTBT) can act as an efficient photoredox catalyst for photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization under green light irradiation. Well-defined (co)polymers can be obtained using this technique without any additional additives like noble metals and electron donors or acceptors. The living characteristics of polymerization were verified by kinetic study and the narrow dispersity (Đ) of the produced polymer. Excellent chain-end fidelity was demonstrated through chain extension as well. In addition, this technique showed great potential for various RAFT agents and monomers including acrylates and acrylamides.

Supramolecular Organic Photocatalyst Containing a Cubanelike Water Cluster and Donor-Acceptor Stacks: Hydrogen Evolution and Dye Degradation under Visible Light

Supramolecular organic photocatalysts are scarcely explored for the generation of sustainable energy as well as for environmental remediation purposes. An organic photocatalyst, containing a cubanelike water cluster and donor-acceptor stacks, was efficiently developed through a supramolecular approach. The material exhibited remarkable photocatalytic hydrogen generation, in the absence of any cocatalyst, with excellent stability and recyclability. The photoactivity was further assessed through time-resolved photoluminescence and electrochemical impedance spectroscopy. The material also exhibited highly efficient sunlight-driven photocatalytic activity through the degradation of harmful organic dye methylene blue.

Atom Transfer Radical Polymerization (ATRP) Catalyzed by Visible Light-Absorbed Small Molecule Organic Semiconductors

Atom transfer radical polymerization is successfully conducted with an organic semiconductor (OS)-based visible light activated photocatalyst via a precisely designed catalytic cycle. The living nature of the polymerization by the OS type photocatalyst is proved by the linearly-increasing molecular weight with consumption of the monomer, the expected molecular weight from MALDI-TOF measurements, and the chain extending reaction, as well as block copolymer synthesis. Benefitting from clear and measurable reductive potential as well as the oxidative potential of the OS-type photocatalyst, the intrinsic demand for "living radical polymerization" is discussed and examined, which indicates the diversity and great potential of OS-type photocatalysts for organic synthesis.

Electrochemical dehydrogenative cyclization of 1,3-dicarbonyl compounds

The intramolecular C(sp3)-H/C(sp2)-H cross-coupling of 1,3-dicarbonyl compounds has been achieved through Cp2Fe-catalyzed electrochemical oxidation. The key to the success of these dehydrogenative cyclization reactions is the selective activation of the acidic α-C-H bond of the 1,3-dicarbonyl moiety to generate a carbon-centered radical.