Electrophilic Activation of Silicon-Hydrogen Bonds in Catalytic Hydrosilations

Unveiling the Reactivity of Part Per Million Levels of Cobalt-Salen Complexes in Hydrosilylation of Ketones

A series of air-stable cobalt(III)salen complexes Co-1 to Co-4 have been synthesized and employed in the hydrosilylation of ketones. Notably, the most intricately tailored Co-3 pre-catalyst exhibited exceptional catalytic activity under mild reaction conditions. The developed catalytic hydrosilylation protocol proceeded with an unusual ppm level (5 ppm) catalyst loading of Co-3 and achieved a maximum turnover number (TON) of 200,000. A wide variety of aromatic, aliphatic, and heterocyclic ketones encompassing both electron-donating and electron-withdrawing substituents were successfully transformed into the desired silyl ethers or secondary alcohols in moderate to excellent yields.

Electrophilic Hydrosilylation of Electron-Rich Alkenes Derived from Enamines

The low-electron count, air-stable, platinum complexes [Pt(ItBu')(ItBu)][BArF] (C1) (ItBu=1,3-di-tert-butylimidazol-2-ylidene), [Pt(SiPh)3(ItBuiPr)2][BArF] (C2) (ItBuiPr=1-tert-butyl-3-iso-propylimidazol-2-ylidene), [Pt(SiPh)3(ItBuMe)2][BArF] (C3), [Pt(GePh3)(ItBuiPr)2][BArF] (C4), [Pt(GePh)3(ItBuMe)2][BArF] (C5) and [Pt(GeEt)3(ItBuMe)2][BArF] (C6) (ItBuMe=1-tert-butyl-3-methylimidazol-2-ylidene) are efficient catalysts (particularly the germyl derivatives) in both the silylative dehydrocoupling and hydrosilylation of electron rich alkenes derived from enamines. The steric hindrance exerted by the NHC ligand plays an important role in the selectivity of the reaction. Thus, bulky ligands are selective towards the silylative dehydrocoupling process whereas less sterically hindered promote the selective hydrosilylation reaction. The latter is, in addition, regioselective towards the β-carbon atom of both internal and terminal enamines, leading to β-aminosilanes. Moreover, the syn stereochemistry of the amino and silyl groups implies an anti Si-H bond addition across the double bond. All these facts point to a mechanistic picture that, according to experimental and computational studies, involves a non-classical hydrosilylation process through an outer-sphere mechanism in which a formal nucleophilic addition of the enamine to the silicon atom of a platinum σ-SiH complex is the key step. This is in sharp contrast with the classical Chalk-Harrod mechanism prevalent in platinum chemistry.

Cationic Bis(hydrosilane)-Coinage-Metal Complexes: Synthesis, Characterization, and Use as Catalysts for Outer-Sphere C=O Hydrosilylation Not Involving Metal Hydrides

The preparation of cationic bis(hydrosilane)-coinage-metal complexes by chloride abstraction from the neutral metal chloride precursors with Na[BArF 4] is described. Unlike previously reported hydrosilane-stabilized copper and silver complexes, the presented complexes are cationic and feature two bidentate (ortho-silylphenyl)phosphine ligands. These complexes were fully characterized by NMR spectroscopy and X-ray diffraction analysis, revealing that both Si-H bonds are activated by the Lewis acidic cationic metal center. The new complexes were found to be effective in catalytic carbonyl hydrosilylation, leading to the corresponding silyl ethers under mild conditions without the addition of an external base. Combined mechanistic control experiments and quantum chemical calculations support an ionic outer-sphere mechanism, in which a neutral metal alkoxide species instead of a metal hydride is the key intermediate that interacts with the silylcarboxonium ion to generate the silyl ether.

Synthesis and utility of N-boryl and N-silyl enamines derived from the hydroboration and hydrosilylation of N-heteroarenes and N-conjugated compounds

Catalytic hydroboration and hydrosilylation have emerged as promising strategies for the reduction of unsaturated hydrocarbons and carbonyl compounds, as well as for the dearomatization of N-heteroarenes. Various catalysts have been employed in these processes to achieve the formation of reduced products via distinct reaction pathways and intermediates. Among these intermediates, N-silyl enamines and N-boryl enamines, which are derived from hydrosilylation and hydroboration, are commonly underestimated in this reduction process. Because these versatile intermediates have recently been utilized in situ as nucleophilic reagents or dipolarophiles for the synthesis of diverse molecules, an expeditious review of the synthesis and utilization of N-silyl and N-boryl enamines is crucial. In this review, we comprehensively discuss a wide range of hydrosilylation and hydroboration catalysts used for the synthesis of N-silyl and N-boryl enamines. These catalysts include main-group metals (e.g., Mg and Zn), transition metals (e.g., Rh, Ru, and Ir), earth-abundant metals (e.g., Fe, Co, and Ni), and non-metal catalysts (including P, B, and organocatalysts). Furthermore, we highlight recent research efforts that have leveraged these versatile intermediates for the synthesis of intriguing molecules, offering insights into future directions for these invaluable building blocks.

Radical cascade silylation/cyclization of 1,7-dienes to access silyl-substituted benzo[b]azepin-2-ones

A novel silyl radical-induced cascade silylation/cyclization of 1,7-dienes has been realized employing readily available hydrosilanes as a silicon source and Cu(I) salt as a catalyst. This protocol introduces diverse silicon fragments into a challenging 7-membered ring structure and provides an efficient approach to a wide array of biologically important silyl-substituted benzo[b]azepin-2-ones. Several control experiments suggest that the reaction undergoes a free radical process. The gram-scale synthesis and late-stage transformations further demonstrate the scalability and applicability of the reaction in organic synthesis.

Stereoselective Hydrosilylation of 1,2-Diketones Catalyzed by Chiral Frustrated Lewis Pairs

The asymmetric reduction of 1,2-diketones for the synthesis of optically active 1,2-diols, especially 1,2-anti-diols, remains a formidable challenge. In this paper, we describe the first highly stereoselective hydrosilylation of unsymmetrical vicinal diketones with PhSiH3 by using a chiral frustrated Lewis pair (FLP) catalyst, giving a variety of 1,2-diaryl-1,2-anti-diols in high yields with excellent d.r. values and up to 97 % ee. The chiral FLP catalyst exhibits the ability to control regio-, diastereo- and enantioselectivites concurrently.

Fast and scalable solvent-free access to Lappert's heavier tetrylenes E{N(SiMe3)2}2 (E = Ge, Sn, Pb) and ECl{N(SiMe3)2} (E = Ge, Sn)

Iconic Lappert's heavier tetrylenes E{N(SiMe3)2}2 (E = Ge (1), Sn (2), Pb (3)) have been efficiently prepared from GeCl2·(1,4-dioxane), SnCl2 or PbCl2 and Li{N(SiMe3)2} via a completely solvent-free one-pot mechanochemical route followed by sublimation. This fast, high-yielding and scalable approach (2 has been prepared in a 100 mmol scale), which involves a small environmental footprint, represents a remarkable improvement over any synthetic route reported over the last five decades, being a so far rare example of the use of mechanochemistry in the realm of main group chemistry. This solventless route has been successfully extended to the preparation of other heavier tetrylenes, such as ECl{N(SiMe3)2} (E = Ge (4), Sn (5)).

A [CoSiH2] Silylene Synthon Provides Modular Access to Homo- and Heterobimetallic [Co═Si═M] (M = Co, Fe) Silicide Complexes

Base-stabilized [BP3iPr](H)2CoSiH2(DMAP) (1, [BP3iPr] = PhB(CH2PiPr2)3-; DMAP = 4-dimethylaminopyridine) is a rare instance of a synthon for the simplest "parent" silylene complex (LM═SiH2). Complex 1 was accessed in high yields via double Si-H bond activation in SiH4 by [BP3iPr]Co(DMAP), and in solution, it undergoes rapid exchange between bound and free DMAP by an associative mechanism (as determined by variable-temperature 1H NMR dynamic studies). The DMAP ligand of 1 is readily displaced by metal-based fragments that bind silicon and cleave the Si-H bonds of the SiH2 moiety to produce bimetallic [Co═Si═M] (M = Co, Fe) molecular silicides. Thus, treatment of 1 with 0.5 equiv of (LCoI)2(μ-N2) (L = a tripodal ligand) resulted in the spontaneous formation of [BP3iPr](H)2Co═Si═Co(H)2L (L = [BP2tBuPz], PhB(CH2PtBu2)2(pyrazolyl)- (3); Tp″, HB(3,5-diisopropylpyrazolyl)3- (4)) with the concomitant release of DMAP. The symmetrical silicide [BP3iPr](H)2Co═Si═Co(H)2[BP3iPr] (5) was prepared by treatment of a mixture of 1 and [BP3iPr]Co(DMAP) with 2 equiv of Ph3B, which in this case is required to sequester DMAP as the elimination product Ph3B-DMAP. A heterobimetallic silicide, [BP3iPr](H)2Co═Si═Fe(H)2[SiP3iPr] (7; [SiP3iPr] = PhSi(CH2PiPr2)3), was obtained via in situ KC8 reduction of [SiP3iPr]FeCl and subsequent addition of 1 and Ph3B. These transformations involving a metal-SiH2 derivative demonstrate a fundamentally new type of reactivity for silylene complexes and provide a unique synthetic method for construction of molecular silicide complexes.

Cooperative Catalytic Alkyne Hydrosilylation by a Porphyrinic Metal-Organic Framework Composite

Vinylsilanes are valuable building blocks and important structural units in organic chemistry. Herein, catalytic alkyne hydrosilylation was reported to be promoted by a porphyrin metal-organic framework with the incorporation of Pd nanoparticles (Pd@Ir-PCN-222). Catalytic results showed that Pd@Ir-PCN-222 displayed high catalytic efficiency, giving rise to the E isomer vinylsilane with an excellent turnover frequency (TOF) of 2564 h-1. The mechanism studies revealed that the enhancement of the catalytic activity originated from the cooperation between iridium porphyrin and the Pd nanoparticle in confined spaces. The iridium porphyrin was prone to absorb and condense the hydrosilane and alkyne in the inner cavities of Ir-PCN-222, not only accelerating the reaction but also promoting the Pd nanoparticle to activate the Si-H and C≡C bonds of hydrosilane and alkyne, respectively.

Tandem Dearomatization/Enantioselective Allylic Alkylation of Pyridines

Herein, we report a multistep one-pot reaction of substituted pyridines leading to N-protected tetrahydropyridines with outstanding enantioselectivity (up to 97% ee). An iridium(I)-catalyzed dearomative 1,2-hydrosilylation of pyridines enables the use of N-silyl enamines as a new type of nucleophile in a subsequent palladium-catalyzed asymmetric allylic alkylation. This telescoped process overcomes the intrinsic nucleophilic selectivity of pyridines to synthesize enantioenriched, C-3-substituted tetrahydropyridine products that have been otherwise challenging to access.

Visible-Light-Driven Silyl or Germyl Radical Generation via Si-C or Ge-C Bond Homolysis

We report a simple, rapid, and selective protocol for visible-light-driven generation of silyl radicals through photoredox-induced Si-C bond homolysis. Irradiating 3-silyl-1,4-cyclohexadienes with blue light in the presence of a commercially available photocatalyst smoothly generated silyl radicals bearing various substituents within 1 h, and these radicals were trapped by a broad range of alkenes to afford products in good yields. This process is also available for efficient generation of germyl radicals.

The perfluoroadamantoxy aluminate as an ideal weakly coordinating anion? - synthesis and first applications

Weakly coordinating anions (WCAs) facilitate the stabilization and isolation of highly reactive and almost "naked" cations. Alkoxyaluminate-based WCAs such as [Al(OC(CF₃)₃)₄]^- ([pf]^-) are widely used due to their synthetic accessibility and their high stability. However, small cations are still able to coordinate the oxygen atoms of the [pf]^- anion or even to abstract an alkoxy ligand. The novel WCA [Al(OC₁₀F₁₅)₄]^- ([pfAd]^-; OC₁₀F₁₅ = perfluoro-1-adamantoxy) is characterized by a very rigid core framework, thus indicating a higher stability towards fluoride-ion abstraction (DFT calculations) and providing hope to generate less disordered crystal structures. The [pfAd]^- anion was generated by the reaction of the highly acidic alcohol perfluoro-1-adamantanol C₁₀F₁₅OH with LiAlH₄ in o-DFB. Li[pfAd] could not be synthesized free of impurities (and still contains unreacted alcohol). Yet, starting from contaminated Li[pfAd], the very useful pure salts Ag[pfAd], [Ph₃C][pfAd] and [H(OEt₂)₂][pfAd] could be synthesized. The salts were characterized by NMR spectroscopy, single-crystal X-ray diffraction and IR spectroscopy. Additionally, [NO][pfAd] could be synthesized containing alcohol impurities but nonetheless enabled the synthesis of the salt P₉⁺[pfAd]^-. The synthesis of Tl[pfAd] in a mixture of H₂O/acetone/o-DFB demonstrated the water stability of the [pfAd]^- anion.

Direct Transformation of SiH4 to a Molecular L(H)2Co═Si═Co(H)2L Silicide Complex

The synthesis of bimetallic molecular silicide complexes is reported, based on the use of multiple Si-H bond activations in SiH₄ at the metal centers of 14-electron LCo^I fragments (L = Tp″, HB(3,5-diisopropylpyrazolyl)₃^-; [BP₂^tBuPz], PhB(CH₂P^tBu₂)₂(pyrazolyl)). Upon exposure of (Tp″Co)₂(μ-N₂) (1) to SiH₄, a mixture of (Tp″Co)₂(μ-H) (2) and (Tp″Co)₂(μ-H)₂ (3) was formed and no evidence for Si-H oxidative addition products was observed. In contrast, [BP₂^tBuPz]-supported Co complexes led to Si-H oxidative additions with the generation of silylene and silicide complexes as products. Notably, the reaction of ([BP₂^tBuPz]Co)₂(μ-N₂) (5) with SiH₄ gave the dicobalt silicide complex [BP₂^tBuPz](H)₂Co═Si═Co(H)₂[BP₂^tBuPz] (8) in high yield, representing the first direct route to a symmetrical bimetallic silicide. The effect of the [BP₂^tBuPz] ligand on Co-Si bonding in 7 and 8 was explored by analysis of solid-state molecular structures and density functional theory (DFT) investigations. Upon exposure to CO or DMAP (DMAP = 4-dimethylaminopyridine), 8 converted to the corresponding [BP₂^tBuPz]Co(L)_x adducts (L = CO, x = 2; L = DMAP, x = 1) with concomitant loss of SiH₄, despite the lack of significant Si-H interactions in the starting complex. On heating to 60 °C, 8 underwent reaction with MeCl to produce small quantities of Me_xSiH_4-x (x = 1-3), demonstrating functionalization of the μ-silicon atom in a molecular silicide to form organosilanes.

Calcium-catalysed synthesis of amines through imine hydrosilylation: an experimental and theoretical study

A method to reduce aldimines through hydrosilylation is reported. The catalytic system involves calcium triflimide (Ca(NTf₂)₂) and potassium hexafluorophosphate (KPF₆) which have been shown to act in a synergistic manner. The expected amines are obtained in fair to very high yields (40-99%) under mild conditions (room temperature in most cases). To illustrate the potential of this method, a bioactive molecule with antifungal properties was prepared on the gram scale and in high yield in environmentally friendly 2-methyltetrahydrofuran. Moreover, it is shown in this example that the imine can be prepared in situ from the aldehyde and the amine without isolating the imine. The mechanism involved has been explored experimentally and through DFT calculations, and the results are in accordance with an electrophilic activation of the silane by the calcium catalyst.

Access to Enantiomerically Pure P-Stereogenic Primary Aminophosphine Sulfides under Reductive Conditions

Stereochemically pure phosphines with phosphorus-heteroatom bonds and P-centered chirality are a promising class of functional building blocks for the design of chiral ligands and organocatalysts. A route to enantiomerically pure primary aminophosphine sulfides was opened through stereospecific reductive C-N bond cleavage of phosphorus(V) precursors by lithium in liquid ammonia. The chemoselectivity of the reaction as a function of reaction time, substrate pattern, and chiral auxiliary was investigated. In the presence of exclusively aliphatic groups bound to the phosphorus atom, all competing reductive side reactions are totally prevented. The absolute configurations of all P-stereogenic compounds were determined by single-crystal X-ray diffraction analysis. Their use as synthetic building blocks was demonstrated. The lithium salt of (R)-BINOL-dithiophosphoric acid proved to be a useful stereochemical probe to determine the enantiomeric purity. Insights into the coordination mode of the lithium-based chiral complex formed in solution was provided by NMR spectroscopy and DFT calculations.

Rhodium-Catalyzed Dynamic Kinetic Asymmetric Hydrosilylation to Access Silicon-Stereogenic Center

Strategies on the construction of enantiomerically pure silicon-stereogenic silanes generally relies on desymmetrization of prochiral and symmetric substrates. However, dynamic kinetic asymmetric transformations of organosilicon compounds have remained underdeveloped and unforeseen owing to a lack of an effective method for deracemization of the static silicon stereocenters. Here we report the first Rh-catalyzed dynamic kinetic asymmetric intramolecular hydrosilylation (DyKAH) with "silicon-centered" racemic hydrosilanes that enables the facile preparation of silicon-stereogenic benzosiloles in good yields and excellent enantioselectivities. The special rhodium catalyst controlled by non-diastereopure-type mixed phosphine-phosphoramidite ligand with axial chirality and multiple stereocenters can induce enantioselectivity efficiently in this novel DyKAH reaction. Density functional theory (DFT) calculations suggest that the amide moiety in chiral ligand plays important role in facilitating the S_N 2 substitution of chloride ion to realize the chiral inversion of silicon center.

Bonding Situation of σ-E-H Complexes in Transition Metal and Main Group Compounds

The ambiguous bonding situation of σ-E-H (E=Si, B) complexes in transition metal compounds has been rationalized by means of Density Functional Theory calculations. To this end, the combination of the Energy Decomposition Analysis (EDA) method and its Natural Orbital for Chemical Valance (NOCV) extension has been applied to representative complexes described in the literature where the possible η¹ versus η² coordination mode is not unambiguously defined. Our quantitative analyses, which complement previous data based on the application of the Quantum Theory of Atoms in Molecules (QTAIM) approach, indicate that there exists a continuum between genuine η¹ and η² modes depending mainly on the strength of the backdonation. Finally, we also applied this EDA-NOCV approach to related main-group species where the backdonation is minimal.

Sweet, Sugar-Coated Hierarchical Platinum Nanostructures for Easy Support, Heterogenization and Separation

Metal nanoparticles are increasingly gaining interest in the field of heterogeneous catalysis. Here, we present a novel strategy for synthesizing sugar-coated platinum nanostructures (SC-Pt-NS) from the carbohydrates sucrose and D(-)-fructose. In the synthesis from a mixture of H2PtCl6·6H2O, the carbohydrate in an ionic liquid (IL) yielded primary particles of a homogeneous average size of ~10 nm, which were aggregated to hierarchical Pt nanostructures of ~40–65 nm and surrounded or supported by the carbohydrate. These sugar-coated platinum nanostructures present a facile way to support and heterogenize nanoparticles, avoid leaching and enable easier separation and handling. The catalytic activity of the SC-Pt-NS was shown in the hydrosilylation test reaction of phenylacetylene with triethylsilane, where very high turnover frequency (TOF) values of up to 87,200 h−1 could be achieved, while the platinum metal leaching into the product was very low.

Silyl formates as hydrosilane surrogates for the transfer hydrosilylation of ketones

A transfer hydrosilylation of ketones employing silyl formates as hydrosilane surrogates under mild conditions is presented. A total of 24 examples of ketones have been successfully converted to their corresponding silyl ethers with 61-99% yields in the presence of a PN^HP-based ruthenium catalyst and silyl formate reagent. The crucial role of the ligand for the transformation is demonstrated.

Inorganometallics (Transition Metal-Metalloid Complexes) and Catalysis

While the formation and breaking of transition metal (TM)-carbon bonds plays a pivotal role in the catalysis of organic compounds, the reactivity of inorganometallic species, that is, those involving the transition metal (TM)-metalloid (E) bond, is of key importance in most conversions of metalloid derivatives catalyzed by TM complexes. This Review presents the background of inorganometallic catalysis and its development over the last 15 years. The results of mechanistic studies presented in the Review are related to the occurrence of TM-E and TM-H compounds as reactive intermediates in the catalytic transformations of selected metalloids (E = B, Si, Ge, Sn, As, Sb, or Te). The Review illustrates the significance of inorganometallics in catalysis of the following processes: addition of metalloid-hydrogen and metalloid-metalloid bonds to unsaturated compounds; activation and functionalization of C-H bonds and C-X bonds with hydrometalloids and bismetalloids; activation and functionalization of C-H bonds with vinylmetalloids, metalloid halides, and sulfonates; and dehydrocoupling of hydrometalloids. This first Review on inorganometallic catalysis sums up the developments in the catalytic methods for the synthesis of organometalloid compounds and their applications in advanced organic synthesis as a part of tandem reactions.

Nucleophilicity and Electrophilicity in the Gas Phase: Silane Hydricity

Hydricity is of great import as hydride transfer reactions are prominent in many processes, including organic synthesis, photoelectrocatalysis, and hydrogen activation. Herein, the kinetic hydricity of a series of silanes is examined in the gas phase. Most of these reactions have not heretofore been studied in vacuo and provide valuable data that can be compared to condensed-phase hydricity, to reveal the effects of solvent. Both experiments and computations are used to gain insight into mechanism and reactivity. In a broader sense, these studies also represent a first step toward systematically understanding nucleophilicity and electrophilicity in the absence of a solvent.

Versatile Fe-Sn Bonding Interactions in a Metallostannylene System: Multiple Bonding and C-H Bond Activation

The metallostannylene Cp*(iPr2MeP)(H)2Fe-SnDMP (1; Cp* = η5-C5Me5; DMP = 2,6-dimesitylphenyl), formed by hydrogen migration in a putative Cp*(iPr2MeP)HFe[Sn(H)DMP] intermediate, serves as a robust platform for exploration of transition-metal main-group element bonding and reactivity. Upon one-electron oxidation, 1 expels H2 to generate the coordinatively unsaturated [Cp*(iPr2MeP)Fe═SnDMP][B(C6F5)4] (3), which possesses a highly polarized Fe-Sn multiple bond that involves interaction of the tin lone pair with iron. Evidence from EPR and 57Fe Mössbauer spectroscopy, along with DFT studies, shows that 3 is primarily an iron-based radical with charge localization at tin. Upon reduction of 3, C-H bond activation of the phosphine ligand was observed to produce Cp*HFe(κ2-(P,Sn)═Sn(DMP)CH2CHMePMeiPr) (5). Complex 5 was also accessed via thermolysis of 1, and kinetics studies of this thermolytic pathway indicate that the reductive elimination of H2 from 1 to produce a stannylyne intermediate, Cp*(iPr2MeP)Fe[SnDMP] (A), is likely rate-determining. Evidence indicates that the production of 5 proceeds through a concerted C-H bond activation. DFT investigations suggest that the transition state for this transformation involves C-H cleavage across the Fe-Sn bond and that a related transition state where C-H bond activation occurs exclusively at the tin center is disfavored, illustrating an effect of iron-tin cooperativity in this system.

Activation of Si–H and B–H bonds by Lewis acidic transition metals and p-block elements: same, but different

In this Perspective we discuss the ability of transition metal complexes to activate and cleave the Si–H and B–H bonds of hydrosilanes and hydroboranes (tri- and tetra-coordinated) in an electrophilic manner, avoiding the need for the metal centre to undergo two-electron processes (oxidative addition/reductive elimination). A formal polarization of E–H bonds (E = Si, B) upon their coordination to the metal centre to form σ-EH complexes (with coordination modes η¹ or η²) favors this type of bond activation that can lead to reactivities involving the formation of transient silylium and borenium/boronium cations similar to those proposed in silylation and borylation processes catalysed by boron and aluminium Lewis acids. We compare the reactivity of transition metal complexes and boron/aluminium Lewis acids through a series of catalytic reactions in which pieces of evidence suggest mechanisms involving electrophilic reaction pathways.

In this Perspective we compare the ability of transition metals and p-block Lewis acids to activate electrophilically hydrosilanes and hydroboranes. The mechanistic similarities and dissimilarities in different catalytic transformations are analyzed.

Highly Regio- and Enantioselective Hydrosilylation of gem-Difluoroalkenes via Nickel Catalysis

The synthesis of small organic molecules with a difluoromethylated stereocenter is particularly attractive in drug discovery. Herein, we developed an efficient method for the direct generation of difluoromethylated stereocenters through Ni(0)-catalyzed regio - and enantioselective hydrosilylation of gem -difluoroalkenes. The reaction also represents the enantioselective construction of carbon(sp 3 )-silicon bonds with nickel catalysis, which provides an atom- and step-economical synthesis route of high-value optically active α-difluoromethylsilanes. This protocol features with readily available starting materials and commercial chiral catalysis, broad substrates spanning a range of functional groups with high yield (up to 99% yield) and excellent enantioselectivity (up to 96% ee). The enantioenriched products undergo a variety of stereospecific transformations. Preliminary mechanistic studies were performed.

Cobalt-catalyzed alkyne hydrosilylation as a new frontier to selectively access silyl-hydrocarbons

The hydrosilylation of alkynes is a chief chemical method for accessing a range of alkenylsilanes, which can be derivatized to obtain value-added hydrocarbons and utilized in diverse applications. While noble metal-based catalytic procedures have shown great success in accessing vinylsilanes within the context of both academia and industry, replacing the noble metals with cheaper and more abundant base metals has recently drawn significant interest due to their catalytic sustainability and competencies including unprecedented reactivity that could expand chemical tools for accessing other types of silicon-containing hydrocarbons. During the past few years, a number of well-defined, robust cobalt-catalyst platforms that broadly operate either the Chalk-Harrod or a modified Chalk-Harrod mechanism have emerged as a new frontier in the field of selective alkyne hydrosilylation. This review describes the main features of cobalt catalyst systems recently documented for the hydrosilylation of alkynes with a strong emphasis on ligand design and reaction pathways involving Co-H and/or Co-silyl species-mediated elementary transformations to achieve Markovnikov/anti-Markovnikov hydrosilylations as well as new migratory transformations.

Molecular Scissors for Tailor-Made Modification of Siloxane Scaffolds

The controlled design of functional oligosiloxanes is an important topic in current research. A consecutive Si−O−Si bond cleavage/formation using siloxanes that are substituted with 1,2‐diaminobenzene derivatives acting as molecular scissors is presented. The method allows to cut at certain positions of a siloxane scaffold forming a cyclic diaminosilane or ‐siloxane intermediate and then to introduce new functional siloxy units. The procedure could be extended to a direct one‐step cleavage of chlorooligosiloxanes. Both siloxane formation and cleavage proceed with good to excellent yields, high regioselectivity, and great variability of the siloxy units. Control of the selectivity is achieved by the choice of the amino substituent. Insight into the mechanism was provided by low temperature NMR studies and the isolation of a lithiated intermediate.

Molecular Main Group Metal Hydrides

This review serves to document advances in the synthesis, versatile bonding, and reactivity of molecular main group metal hydrides within Groups 1, 2, and 12-16. Particular attention will be given to the emerging use of said hydrides in the rapidly expanding field of Main Group element-mediated catalysis. While this review is comprehensive in nature, focus will be given to research appearing in the open literature since 2001.

Phosphirenium Ions as Masked Phosphenium Catalysts: Mechanistic Evaluation and Application in Synthesis

The utilization of phosphirenium ions is presented; optimized and broadened three-membered ring construction is described together with the use of these ions as efficient pre-catalysts for metal-free carbonyl reduction with silanes. Full characterization of the phosphirenium ions is presented, and initial experimental and computational mechanistic studies indicate that these act as a “masked phosphenium” source that is accessed via ring opening. Catalysis proceeds via associative transfer of {Ph₂P⁺} to a carbonyl nucleophile, H–SiR₃ bond addition over the C=O group, and associative displacement of the product by a further equivalent of the carbonyl substrate, which completes the catalytic cycle. A competing off-cycle process leading to vinyl phosphine formation is detailed for the hydrosilylation of benzophenone for which an inverse order in [silane] is observed. Experimentally, the formation of side products, including off-cycle vinyl phosphine, is favored by electron-donating substituents on the phosphirenium cation, while catalytic hydrosilylation is promoted by electron-withdrawing substituents. These observations are rationalized in parallel computational studies.

Cationic Zinc Hydride Catalyzed Carbon Dioxide Reduction to Formate: Deciphering Elementary Reactions, Isolation of Intermediates, and Computational Investigations

Zinc has been an element of choice for carbon dioxide reduction in recent years. Zinc compounds have been showcased as catalysts for carbon dioxide hydrosilylation and hydroboration. The extent of carbon dioxide reduction can depend on various factors, including electrophilicity at the zinc center and the denticity of the ancillary ligands. In a few cases, the addition of Lewis acids to zinc hydride catalysts markedly influences carbon dioxide reduction. These factors have been investigated by exploring elementary reactions of carbon dioxide hydrosilylation and hydroboration by using cationic zinc hydrides bearing tetradentate tris[2-(dimethylamino)ethyl]amine and tridentate N,N,N',N'',N''-pentamethyldiethylenetriamine in the presence of triphenylborane and tris(pentafluorophenyl)borane.

Silylium Ions: From Elusive Reactive Intermediates to Potent Catalysts

The history of silyl cations has all the makings of a drama but with a happy ending. Being considered reactive intermediates impossible to isolate in the condensed phase for decades, their actual characterization in solution and later in solid state did only fuel the discussion about their existence and initially created a lot of controversy. This perception has completely changed today, and silyl cations and their donor-stabilized congeners are now widely accepted compounds with promising use in synthetic chemistry. This review provides a comprehensive summary of the fundamental facts and principles of the chemistry of silyl cations, including reliable ways of their preparation as well as their physical and chemical properties. The striking features of silyl cations are their enormous electrophilicity and as such reactivity as super Lewis acids as well as fluorophilicity. Known applications rely on silyl cations as reactants, stoichiometric reagents, and promoters where the reaction success is based on their steady regeneration over the course of the reaction. Silyl cations can even be discrete catalysts, thereby opening the next chapter of their way into the toolbox of synthetic methodology.

Direct Synthesis of Methyl Chlorosilanes from Pd-Mg-SiO2 Substrates Using Mechanochemistry

The direct reaction of methyl chloride with magnesium and palladium infused silica substrates to synthesize methyl chlorosilanes is reported. First, high energy ball milling on solid Mg-SiO₂ mixtures produces elemental silicon and MgO. When PdCl₂ is infused into the mixture, after additional ball milling and high-temperature reduction under H₂ , dipalladium silicide (Pd₂ Si) is produced. The silicon of the Pd₂ Si readily reacts with MeCl under Müller-Rochow reaction conditions, to produce methyl chlorosilanes at yield ratios analogous to those of the traditional process. The dominant product is Me₂ SiCl₂ (selectivity > 30%), followed by MeSiCl₃ and Me₃ SiCl, with minor amounts of the remaining chlorosilanes. Silicon conversion exceeds 20% for most of the substrates. The elemental palladium, which remains within the Pd-Mg-SiO₂ contact mass is re-converted to Pd₂ Si at the next H₂ /high-temperature treatment and reacts again with MeCl to repeat the methyl chlorosilane production. In principle, the resulting cycle of the mechanochemically induced formation of Pd₂ Si followed by the reaction with MeCl can be repeated until the starting SiO₂ converts completely to methyl chlorosilanes.

σ or π? Bonding interactions in a series of rhenium metallotetrylenes

Salt metathesis reactions between a low-valent rhenium(i) complex, Na[Re(η5-Cp)(BDI)] (BDI = N,N'-bis(2,6-diisopropylphenyl)-3,5-dimethyl-β-diketiminate), and a series of amidinate-supported tetrylenes of the form ECl[PhC(NtBu)2] (E = Si, Ge, Sn) led to rhenium metallotetrylenes Re(E[PhC(NtBu)2])(η5-Cp)(BDI) (E = Si (1a), Ge (2), Sn (4)) with varying extents of Re-E multiple bonding. Whereas the rhenium-stannylene 4 adopts a σ-metallotetrylene arrangement featuring a Re-E single bond, the rhenium-silylene (1a) and -germylene (2) both engage in π-interactions to form short Re-E multiple bonds. Temperature was found to play a crucial role in reactions between Na[Re(η5-Cp)(BDI)] and SiCl[PhC(NtBu)2], as manipulation of reaction conditions led to isolation of an unusual rhenium-silane, (BDI)Re(μ-η5:η1-C5H4)(SiH[PhC(NtBu)2]) (1b) and a dinitrogen bridged rhenium-silylene, (η5-Cp)(BDI)Re(μ-N2)Si[PhC(NtBu)2] (1c), in addition to 1a. Finally, the reaction of Na[Re(η5-Cp)(BDI)] with GeCl2·dioxane led to a rare μ2-tetrelido complex, μ2-Ge[Re(η5-Cp)(BDI)]2 (3). Bonding interactions within these complexes are discussed through the lens of various spectroscopic, structural, and computational investigations.

Reversible Silylium Transfer between P-H and Si-H Donors

The Mo=PR₂ π* orbital in a Mo phosphenium complex acts as acceptor in a new P^III -based Lewis superacid. This Lewis acid (LA) participates in electrophilic Si-H abstraction from E₃ SiH to give a Mo-bound secondary phosphine ligand, Mo-PR₂ H. The resulting Et₃ Si⁺ ion remains associated with the Mo complex, stabilized by η¹ -P-H donation, yet undergoes rapid exchange with an η¹ -Si-H adduct of free silane in solution. The equilibrium between these two adducts presents an opportunity to assess the role of this new LA in catalytic reactions of silanes: is the LA acting as a catalyst or as an initiator? Preliminary results suggest that a cycle including the Mo-bound phosphine-silylium adduct dominates in the catalytic hydrosilylation of acetophenone, relative to a putative cycle involving the silane-silylium adduct or "free" silylium.

Nickel-Catalyzed Hydrosilylation of Terminal Alkenes with Primary Silanes via Electrophilic Silicon-Hydrogen Bond Activation

We report a simple and effective nickel-based catalytic system, NiCl₂·6H₂O/^tBuOK, for the electrophilically activated hydrosilylation of terminal alkenes with primary silanes. This protocol provides excellent performance under mild reaction conditions: exclusive anti-Markovnikov selectivity, broad functional group tolerance (36 examples), and good scalability (TON = 5500). However, the secondary and tertiary silanes are not suitable. Mechanistic studies revealed that this homogeneous catalytic hydrosilylation includes an electrophilically activated Si-H bond process without the generation of nickel hydrides.