Enhancing Photoelectrochemical Water Oxidation on WO3 via Electrochromic Modulation: Universal Effects and Mechanistic Insights

Although WO3 exhibits both electrochromic and photoelectrochemical (PEC) properties, there is no research conducted to investigate the correlation between them. The study herein reports the electrochromic enhancement of PEC activity on WO3. The electrochromic WO3 (e-WO3) exhibits a significantly enhanced activity for PEC water oxidation compared to raw WO3 (r-WO3), with a limiting photocurrent density three times that of r-WO3. The electrochromic enhancement of PEC activity is universal and independent of the type of cations inserted during electrochromism. Decoloring reduces the PEC activity but a simple re-coloring restores the activity to its maximum value. Electrochromism induces large amounts of oxygen vacancies and surface states, the former improving the electron density of WO3 and the latter facilitating the hole transfer across e-WO3/electrolyte interface. It is proved that the electrochromic enhancement effect is due to the significantly improved electron-hole separation efficiency and the charge transfer efficiency across the WO3/electrolyte interface.

Amine-Rich Hydrogels for Molecular Nanoarchitectonics of Photosystem II and Inverse Opal TiO2 toward Solar Water Oxidation

Solar water oxidation is a crucial process in light-driven reductive synthesis, providing electrons and protons for various chemical reductions. Despite advances in light-harvesting materials and cocatalysts, achieving high efficiency and stability remains challenging. In this study, we present a simple yet effective strategy for immobilizing natural photosystems (PS) made of abundant and inexpensive elements, using amine-rich polyethylenimine (PEI) hydrogels, to fabricate organic/inorganic hybrid photoanodes. Natural PS II extracted from spinach was successfully immobilized on inverse opal TiO2 photoanodes in the presence of PEI hydrogels, leading to greatly enhanced solar water oxidation activity. Photoelectrochemical (PEC) analyses reveal that PS II can be immobilized in specific orientations through electrostatic interactions between the positively charged amine groups of PEI and the negatively charged stromal side of PS II. This specific orientation ensures efficient photogenerated charge separation and suppresses undesired side reactions such as the production of reactive oxygen species. Our study provides an effective immobilization platform and sheds light on the potential utilization of PS II in PEC water oxidation.

Fabrication of Ultrafine Cu2 O Nanoparticles on W18 O49 Ultra-Thin Nanowires by In-Situ Reduction for Highly Efficient Photocatalytic Nitrogen Fixation

Photocatalytic ammonia synthesis technology is one of the important methods to achieve green ammonia synthesis. Herein, two samples of Cu ion-doped W18 O49 with different morphologies, ultra-thin nanowires (Cu-W18 O49 -x UTNW) and sea urchin-like microspheres (Cu-W18 O49 -x SUMS), are synthesized by a simple solvothermal method. Subsequently, Cu2 O-W18 O49 -x UTNW/SUMS is synthesized by in situ reduction, where the NH3 production rate of Cu2 O-W18 O49 -30 UTNW is 252.4 µmol g-1  h-1 without sacrificial reagents, which is 11.8 times higher than that of the pristine W18 O49 UTNW. The Cu2 O-W18 O49 -30 UTNW sample is rich in oxygen vacancies, which promotes the chemisorption and activation of N2 molecules and makes the N≡N bond easier to dissociate by proton coupling. In addition, the in situ reduction-generated Cu2 O nanoparticles exhibit ideal S-scheme heterojunctions with W18 O49 UTNW, which enhances the internal electric field strength and improves the separation and transfer efficiency of the photogenerated carriers. Therefore, this study provides a new idea for the design of efficient nitrogen fixation photocatalysis.

Porous carbon film/WO3-x nanosheets based SERS substrate combined with deep learning technique for molecule detection

The Surface-enhanced Raman scattering (SERS) is an attractive optical detecting method with high sensitivity and detectivity, however challenges on large-area signal uniformity and complex spectra analysis methods always retards its wide application. Herein, a highly sensitive and uniform SERS detection strategy supported by porous carbon film/WO3-x nanosheets (PorC/WO3-x) based noble-metal-free SERS substrate and deep learning algorithm are reported. Experimentally, the PorC/WO3-x substrate was prepared by high-temperature annealing the PorC/WO3 films under the argon atmosphere. The defect density of the WO3 was controlled by tuning the reducing reaction time during the annealing process. The SERS performance was evaluated by using R6G as the Raman reporter, it showed that the SERS intensity obtained on the substrate with the optimal annealing time of 3 h was about 8 times as high as that obtained on the PorC/WO3 substrate without annealing treatment. And detection limit of 10-7 M and Raman enhancement factor of 106 could be achieved. Moreover, the above optimal SERS substrate was utilized to detect flavonoids of quercetin, 3-hydroxyflavone and flavone, and a deep learning algorithms was incorporated to identify the quercetin. It revealed that quercetin can be accurately detected within the above flavonoids, and lowest detectable concentration of 10-5 M can be achieved.

An Interface-cascading Silicon Photoanode with Strengthened Built-in Electric Field and Enriched Surface Oxygen Vacancies for Efficient Photoelectrochemical Water Splitting

To promote interfacial charge transfer process and accelerate surface water oxidation reaction kinetics for photoelectrochemical (PEC) water splitting over n-type Silicon (n-Si) based photoanodes, herein, starting with surface stabilized n-Si/CoOx , a NiOx /NiFeOOH composite overlayer was coated by atomic layer deposition and spray coating to fabricate the multilayer structured n-Si/CoOx /NiOx /NiFeOOH photoanode. Encouragingly, the obtained n-Si/CoOx /NiOx /NiFeOOH photoanode exhibits much increased PEC activity for water splitting, with onset potential cathodically shifted to ~0.96 V vs. RHE and photocurrent density increased to 22.6 mA cm-2 at 1.23 V vs. RHE for OER, as compared to n-Si/CoOx , even significantly surpassing the counterpart n-Si/CoOx /NiOx /FeOOH and n-Si/CoOx /NiOx /NiOOH photoanodes. Photophysical and electrochemical characterizations evidence that the deposited CoOx /NiOx /NiFeOOH composite overlayer would create large band bending and strong built-in electric field at the introduced cascading interfaces, thereby producing a large photovoltage of 650 mV to efficiently accelerate charge transfer from the n-Si substrate to the electrolyte for water oxidation. Furthermore, the surface oxygen vacancy enriched NiFeOOH overlayer could effectively catalyze the water oxidation reaction by thermodynamically reducing the energy barrier of rate determining step for OER.

Cationic Defect-Modulated Li-Ion Migration in High-Voltage Li-Metal Batteries

Li metal exhibits high potential as an anode material for next-generation high-energy density batteries. However, the nonuniform transport of Li+ ions causes Li-dendrite growth at the metal electrode, leading to severe capacity decay and a short cycling life. In this study, negatively charged lithiophilic sites (such as cationic metal vacancies) were used as hosts to regulate the atomic-scale Li+-ion deposition in Li-metal batteries (LMBs). As a proof of concept, three-dimensional (3D) carbon nanofibers (CNFs) decorated with negatively charged TiNbO4 grains (labeled CNF/nc-TNO) were confirmed to be promising Li hosts. Cationic vacancies caused by the carbothermal reduction of Nb5+ and Ti4+ ions generated a negatively charged fiber surface and strong electrostatic interactions that guided the Li+-ion flux to the shadowed areas underneath the fiber and throughout the fibrous mat. Consequently, circumferential Li-metal plating was observed in the CNF/nc-TNO host, even at a high current density of 10 mA cm-2. Moreover, CNF/nc-TNO asymmetric cells delivered a significantly more robust and stable Coulombic efficiency (CE) (99.2% over 380 cycles) than cells comprising electrically neutral CNFs without cationic defects (which exhibits rapid failure after 20 cycles) or Cu foil (which exhibits rapid CE decay, with a CE of 87.1% after 100 cycles). Additionally, CNF/nc-TNO exhibited high stability and low-voltage hysteresis during repeated Li plating/stripping (for over 4000 h at 2 mA cm-2) with an areal capacity of 2 mAh cm-2. It was further paired with high-voltage LiNi0.8Co0.1Mn0.1 (NCM811) cathodes, and the full cells showed long-term cycling (220 cycles) with a CE of 99.2% and a steady rate capability.

Surface Oxygen Species in Metal Oxide Photoanodes for Solar Energy Conversion

Converting and storing solar energy directly as chemical energy through photoelectrochemical devices are promising strategies to replace fossil fuels. Metal oxides are commonly used as photoanode materials, but they still encounter challenges such as limited light absorption, inefficient charge separation, sluggish surface reactions, and insufficient stability. The regulation of surface oxygen species on metal oxide photoanodes has emerged as a critical strategy to modulate molecular and charge dynamics at the reaction interface. However, the precise role of surface oxygen species in metal oxide photoanodes remains ambiguous. The review focuses on elucidating the formation and regulation mechanisms of various surface oxygen species in metal oxides, their advantages and disadvantages in photoelectrochemical reactions, and the characterization methods employed to investigate them. Additionally, the article discusses emerging opportunities and potential hurdles in the regulation of surface oxygen species. By shedding light on the significance of surface oxygen species, this review aims to advance our understanding of their impact on metal oxide photoanodes, paving the way for the design of more efficient and stable photoelectrochemical devices.

Recent Progress in Interface Engineering of Nanostructures for Photoelectrochemical Energy Harvesting Applications

With rapid and continuous consumption of nonrenewable energy, solar energy can be utilized to meet the energy requirement and mitigate environmental issues in the future. To attain a sustainable society with an energy mix predominately dependent on solar energy, photoelectrochemical (PEC) device, in which semiconductor nanostructure-based photocatalysts play important roles, is considered to be one of the most promising candidates to realize the sufficient utilization of solar energy in a low-cost, green, and environmentally friendly manner. Interface engineering of semiconductor nanostructures has been qualified in the efficient improvement of PEC performances including three basic steps, i.e., light absorption, charge transfer/separation, and surface catalytic reaction. In this review, recently developed interface engineering of semiconductor nanostructures for direct and high-efficiency conversion of sunlight into available forms (e.g., chemical fuels and electric power) are summarized in terms of their atomic constitution and morphology, electronic structure and promising potential for PEC applications. Extensive efforts toward the development of high-performance PEC applications (e.g., PEC water splitting, PEC photodetection, PEC catalysis, PEC degradation and PEC biosensors) are also presented and appraised. Last but not least, a brief summary and personal insights on the challenges and future directions in the community of next-generation PEC devices are also provided.

Temperature-Controlled Transformation of WO3 Nanowires into Active Facets-Exposed Hexagonal Prisms toward Efficient Visible-Light-Driven Water Oxidation

A unique transformation of WO₃ nanowires (NW-WO₃) into hexagonal prisms (HP-WO₃) was demonstrated by tuning the temperature of the (N₂H₄)WO₃ precursor suspension prepared from tungstic acid and hydrazine as a structure-directing agent. The precursor preparation at 20 °C followed by calcination at 550 °C produced NW-WO₃ nanocrystals (ca. <100 nm width, 3-5 μm length) with anisotropic growth of monoclinic WO₃ crystals to (002) and (200) planes and a polycrystalline character with randomly oriented crystallites in the lateral face of nanowires. The precursor preparation at 45 °C followed by calcination at 550 °C produced HP-WO₃ nanocrystals (ca. 500-1000 nm diameter) with preferentially exposed (002) and (020) facets on the top-flat and side-rectangle surfaces, respectively, of hexagonal prismatic WO₃ nanocrystals with a single-crystalline character. The HP-WO₃ electrode exhibited the superior photoelectrochemical (PEC) performance for visible-light-driven water oxidation to that for the NW-WO₃ electrode; the incident photon-to-current conversion efficiency (IPCE) of 47% at 420 nm and 1.23 V vs RHE for HP-WO₃ was 3.1-fold higher than 15% for the NW-WO₃ electrode. PEC impedance data revealed that the bulk electron transport through the NW-WO₃ layer with the unidirectional nanowire structure is more efficient than that through the HP-WO₃ layer with the hexagonal prismatic structure. However, the water oxidation reaction at the surface for the HP-WO₃ electrode is more efficient than the NW-WO₃ electrode, contributing significantly to the superior PEC water oxidation performance observed for the HP-WO₃ electrode. The efficient water oxidation reaction at the surface for the HP-WO₃ electrode was explained by the high surface fraction of the active (002) facet with fewer grain boundaries and defects on the surface of HP-WO₃ to suppress the electron-hole recombination at the surface.

Ultrathin CuBi2O4 on a bipolar Bi2O3 nano-scaffold: a self-powered broadband photoelectrochemical photodetector with improved responsivity and response speed

CuBi₂O₄ is a promising photoactive material for photoelectrochemical (PEC) broadband photodetectors due to its suitable band structure, but its photo-responsivity is severely limited by the short carrier diffusion length and long light penetration depth. To address the trade-off between light absorption and charge separation, a nano-structured bipolar Bi₂O₃ host scaffold was coupled with an ultrathin CuBi₂O₄ light absorbing layer to construct a host-guest Bi₂O₃/CuBi₂O₄ photocathode. The work function of the bipolar Bi₂O₃ scaffold lies in between FTO and CuBi₂O₄, making Bi₂O₃ a suitable back contact layer for hole transport. Compared with the flat CuBi₂O₄ and Bi₂O₃ scaffold counterpart, the nanostructured Bi₂O₃/CuBi₂O₄ exhibits significantly improved light absorption and enhanced charge separation efficiency. The Bi₂O₃/CuBi₂O₄ PEC photodetector can be self-powered and demonstrates a broad photo-response ranging from ultraviolet (UV) to near infrared (NIR). It shows a high responsivity of 75 mA W^-1 and a remarkable short response time of 0.18 ms/0.19 ms. Bi₂O₃/CuBi₂O₄ prepared by magnetron sputtering demonstrates great potential for rapid PEC photodetection in a wide optical domain.

Photochemically Etching BiVO4 to Construct Asymmetric Heterojunction of BiVO4 /BiOx Showing Efficient Photoelectrochemical Water Splitting

BiVO₄ as a promising semiconductor candidate of the photoanode for solar driven water oxidation always suffers from poor charge carrier transport property and photo-induced self-corrosion. Herein, by intentionally taking advantage of the photo-induced self-corrosion process, a controllable photochemical etching method is developed to rationally construct a photoanode of BiVO₄ /BiO_x asymmetric heterojunction from faceted BiVO₄ crystal arrays. Compared with the BiVO₄ photoanode, the resulting BiVO₄ /BiO_x photoanode gains over three times enhancement in short-circuit photocurrent density (≈3.2 mA cm^-2 ) and ≈75 mV negative shift of photocurrent onset potential. This is due to the formation of the strong interacted homologous heterojunction, which promotes photo-carrier separation and enlarges photovoltage across the interface. Remarkably, the photocurrent density can remain at ≈2.0 mA cm^-2 even after 12 h consecutive operation, while only ≈0.1 mA cm^-2 is left for the control photoanode of BiVO₄ . Moreover, the Faraday efficiency for water splitting is determined to be nearly 100% for the BiVO₄ /BiO_x photoanode. The controllable photochemical etching process may shed light on the construction of homologous heterojunction on other photoelectrode materials that have similar properties to BiVO₄ .

Boosting Reactive Oxygen Species Generation Using Inter-Facet Edge Rich WO3 Arrays for Photoelectrochemical Conversion

Water oxidation reaction leaves room to be improved in the development of various solar fuel productions, because of the kinetically sluggish 4-electron transfer process of oxygen evolution reaction. In this work, we realize reactive oxygen species (ROS), H₂ O₂ and OH⋅, formations by water oxidation with total Faraday efficiencies of more than 90 % by using inter-facet edge (IFE) rich WO₃ arrays in an electrolyte containing CO₃ ^2- . Our results demonstrate that the IFE favors the adsorption of CO₃ ^2- while reducing the adsorption energy of OH⋅, as well as suppresses surface hole accumulation by direct 1-electron and indirect 2-electron transfer pathways. Finally, we present selective oxidation of benzyl alcohol by in situ using the formed OH⋅, which delivers a benzaldehyde production rate of ≈768 μmol h^-1 with near 100 % selectivity. This work offers a promising approach to tune or control the oxidation reaction in an aqueous solar fuel system towards high efficiency and value-added product.

Liquid-Metal-Induced Hydrogen Insertion in Photoelectrodes for Enhanced Photoelectrochemical Water Oxidation

Fast charge separation and transfer (CST) is essential for achieving efficient solar conversion processes. This CST process requires not only a strong driving force but also a sufficient charge carrier concentration, which is not easily achievable with traditional methods. Herein, we report a rapid hydrogenation method enabled by gallium-based liquid metals (GBLMs) to modify the prototypical WO₃ photoelectrode to enhance the CST for a PEC process. Protons in solution are controllably embedded into the WO₃ photoanode accompanied by electron injection due to the strong reduction capability of GBLMs. This process dramatically increases the carrier concentration of the WO₃ photoanode, leading to improved charge separation and transfer. The hydrogenated WO₃ photoanode exhibits over a 229% improvement in photocurrent density with long-term stability. The effectiveness of GBLMs treatment in accelerating the CST process is further proved using other more general semiconductor photoelectrodes, including Nb₂O₅ and TiO₂.

Elucidating the Role of Hypophosphite Treatment in Enhancing the Performance of BiVO4 Photoanode for Photoelectrochemical Water Oxidation

Slow water oxidation kinetics and poor charge transport restrict the development of efficient BiVO4 photoanodes for photoelectrochemical (PEC) water splitting. Oxygen vacancy as an effective strategy can significantly enhance charge transport and improve conductivity in semiconductor photoanodes. Herein, we obtained BiVO4 photoanodes with appropriate oxygen vacancy by treating them with hypophosphite, which significantly improved the PEC performance. The synthesized photoanode exhibits a remarkable photocurrent density of 3.37 mA/cm2 at 1.23 V vs reversible hydrogen electrode with excellent stability. Interestingly, the performance improvement mainly originates from the oxygen vacancy rather than P doping. Our study provides insights in understanding the role of oxygen vacancy in PEC water splitting and strategies for designing more efficient photoelectrodes.

Fast-response MEMS xylene gas sensor based on CuO/WO3 hierarchical structure

CuO/WO₃ hierarchical hollow microspheres, assembled from irregular two dimensional (2D) nanosheets, were prepared by ultrasonic-wet chemical etching and pyrolysis in this study. The sensing performance of Micro-Electro-Mechanical System (MEMS) xylene gas sensor based on CuO/WO₃ hierarchical structure were evaluated. It was found that the CuO/WO₃ MEMS sensors showed an enhanced gas sensing performance compared with pristine WO₃ sensor. The CuO/WO₃-3 (the mass ratio of CuO to WO₃ is 3%) sensor exhibited faster response-recover speed and the highest response value to xylene. Moreover, the CuO/WO₃-3 sensor possessed higher selectivity and long-term stability. The good sensing properties can be attributed to the unique three dimensional (3D) hierarchical structure and p-n heterojunction of CuO-WO₃. Considering the above advantages, the CuO/WO₃-3 sensor has a great potential for the rapid detection and monitoring of xylene.

SERS-active WO3-x thin films with tunable surface plasmon resonance induced by defects from thermal treatment

A series of WO_3-x thin films with defects were obtained by thermal treatments from laser irradiation and annealing, respectively. The corresponding tunability of localized surface plasmon resonance properties and the enhancement of Raman scattering intensity were realized due to the defects in the WO_3-x thin films after thermal treatments. With the changes of either laser power or annealing temperature, the crystalline quality of WO_3-x thin film was declined with a red shift of the surface plasmon resonance wavelength from 464 nm to 482 nm. The as-treated WO_3-x film shows good uniformity and reproducibility in Surface-enhanced Raman spectroscopy measurement, the detection limit for dye methylene blue can reach 10^-8 mol/L, and enhancement factor is 1.38 × 10⁶. Furthermore, the simulation result of finite-difference time-domain showed a substantial agreement with experimental results.

Atom manufacturing of photocatalyst towards solar CO2reduction

Photocatalytic CO₂reduction reaction (CO₂RR) is believed to be a promising remedy to simultaneously lessen CO₂emission and obtain high value-added products, but suffers from the thwarted activity of photocatalyst and poor selectivity of product. Over the past decade, aided by the significant advances in nanotechnology, the atom manufacturing of photocatalyst, including vacancies, dopants, single-atom catalysts, strains, have emerged as efficient approaches to precisely mediate the reaction intermediates and processes, which push forward in the rapid development of highly efficient and selective photocatalytic CO₂RR. In this review, we summarize the recent developments in highly efficient and/or selective photocatalysts toward CO₂RR with the special focus on various atom manufacturing. The mechanisms of these atom manufacturing from active sites creation, light absorbability, and electronic structure modulation are comprehensively and scientifically discussed. In addition, we attempt to establish the structure-activity relationship between active sites and photocatalytic CO₂RR capability by integrating theoretical simulations and experimental results, which will be helpful for insights into mechanism pathways of CO₂RR over defective photocatalysts. Finally, the remaining challenges and prospects in this field to improve the photocatalytic CO₂RR performances are proposed, which can shed some light on designing more potential photocatalysts through atomic regulations toward CO₂conversion.

Ordered Vacancies on the Body-Centered Cubic PdCu Nanocatalysts

Defect engineering has become one of the important considerations in today's electrocatalyst design. However, the vacancies in the ordered crystal structure (especially body-centered cubic (bcc) and the effect of ordered vacancies (OVs) on the electronic fabric have not been researched yet. In this work, we report the inaugural time of the generation of OVs in the bcc architecture and discuss the insight of the modulation system of the material and its part in the electrochemical N₂ reduction reaction (NRR). OV-PdCu-2 achieves the highest Faradaic efficiency value of 21.5% at 0.05 V versus RHE. When the potential increases to 0 V versus RHE, the highest ammonia yield is 55.54 μg h^-1 mg_cat^-1, which is significantly better than the unetched PdCu nanoparticles (12.83 μg h^-1 mg_cat^-1). It is the latest reported catalyst to date in the NRR process at 0 V versus RHE (see Supporting Information).

Morphology Engineering of BiVO4 with CoOx Derived from Cobalt-containing Polyoxometalate as Co-catalyst for Oxygen Evolution

Bismuth vanadate (BiVO₄ ) as a metal oxidation semiconductor has stimulated extensive attention in the photocatalytic water splitting field. However, the poor transport ability and easy recombination of charge carriers limit photocatalytic water oxidation activity of pure BiVO₄ . Herein, the photocatalytic activity of BiVO₄ is enhanced via adjusting its morphology and combination co-catalyst. First, the Cu-BiVO₄ was synthesized by copper doping to control the growth of {110} facet of BiVO₄ , which is regarded for the separation of photo-generated charge carriers. Then the CoO_x in-situ generated from K₆ [SiCo^II (H₂ O)W₁₁ O₃₉ ] ⋅ 16H₂ O was photo-deposited on Cu-BiVO₄ surface as co-catalyst to speed up reaction kinetics. Cu-BiVO₄ @CoO_x hybrid catalyst shows highest photocatalytic activity and best stability among all the prepared catalysts. Oxygen evolution is about 34.6 μmol in pH 4 acetic acid buffer under 420 nm LED irradiation, which is nearly 20 times higher than that of pure BiVO₄ . Apparent quantum efficiency (AQE) in 1 h and O₂ yield are 1.83% and 23.1%, respectively. O₂ evolution amount nearly maintains the original value even after 5 cycles.

Defect engineering in polymeric carbon nitride photocatalyst: Synthesis, properties and characterizations

Polymer carbon nitride (CN) has unique structure and electronic properties, making it attractive in photocatalysis fields. However, the photocatalytic efficiency of the pristine CN photocatalyst is still unsatisfactory. In this regard, the introduction of vacancy defects can effectively tune photoelectric properties of CN photocatalyst through tailoring the electronic structure and bandgap engineering. In this review, the effect of vacancy defects on CN is reviewed from the aspects of light absorption, charge separation and surface photoreactivity of CN. Meanwhile, the current progress in the design of vacancy defects with the classified carbon vacancies (CVs), nitrogen vacancies (NVs), amino and cyano groups on CN to boost the photocatalytic performance is summarized. Furthermore, various characterization methods have been summarized and highlighted, including microscopic characterization (SEM, TEM, AFM, HAADF-STEM), spectroscopic characterization (XRD, FTIR, XAFS, XANES, EPR, PAS, XPS, raman spectroscopy, solid-state NMR spectroscopy), elemental analysis, and computational characterization. Finally, the future opportunities and challenges of CN photocatalysts designed with vacancies and defects are proposed to highlight the development direction of this research field.

Photo-driven Oxygen Vacancies Extends Charge Carrier Lifetime for Efficient Solar Water Splitting

A photocharge/discharge strategy is proposed to initiate the WO₃ photoelectrode and suppress the main charge recombination, which remarkably improves the photoelectrochemical (PEC) performance. The photocharged WO₃ surrounded by a 8-10 nm overlayer and oxygen vacancies could be operated more than 25 cycles with 50 h durability without significant decay on PEC activity. A photocharged WO₃ /CuO photoanode exhibits an outstanding photocurrent of 3.2 mA cm^-2 at 1.23 V_RHE with a low onset potential of 0.6 V_RHE , which is one of the best performances of p-n heterojunction structure. Using nonadiabatic molecular dynamics combined with time-domain DFT, we clarify the prolonged charge carrier lifetime of photocharged WO₃ , as well as how electronic systems of photocharged WO₃ /CuO semiconductors enable the effective photoinduced electrons transfer from WO₃ into CuO. This work provides a feasible route to address excessive defects existed in photoelectrodes without causing extra recombination.

Synthesis, characterization and utilization of oxygen vacancy contained metal oxide semiconductors for energy and environmental catalysis

Developing novel functional materials with promising desired properties in enhancing energy conversion and lowering the catalytic reaction barriers is essential for the demand to solve the increasingly severe energy and environmental crisis nowadays. Metal oxide semiconductors (MOS) are widely used in the field of catalysis because of its excellent catalytic characteristics. Introduction of defects, in addition to the adjustment of composition and atomic arrangement in the materials can effectively improve the materials' catalytic performance. Especially, introducing oxygen vacancies (OVs) into the lattice structure of MOS has been developed as a facile route to improve MOS's optical and electronic transmission characteristics. And a large number of metal oxides with rich OVs have been served in oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CO₂-RR) photo-degradation of organic pollutants, etc. This small review briefly outlines some preparation techniques to introduce OVs into MOS, and the characterization techniques to identify and quantify the OVs in MOS. The applications of OVs contained MOS especially in energy and environmental catalysis areas are also discussed. The effects of OVs types and concentrations on the catalytic performances are deliberated. Finally, the defective structure-catalytic property relationship is highlighted, and the future status and opportunities of MOS containing OVs in the catalytic field are suggested.

The design of high performance photoanode of CQDs/TiO2/WO3 based on DFT alignment of lattice parameter and energy band, and charge distribution

Photoanode is the key issue for photoelectrocatalytic (PEC) water splitting and organics degradation. However, it always faces several restrictions including severe photocorrosion, low charge separation and transfer efficiencies, poor visible light harvesting, and sluggish interfacial reaction kinetics, which often required a variety of modifications with only low improvements achieved. Herein, a high performance CQDs/TiO₂/WO₃ photoanode was designed on the basis of density function theory (DFT) alignment of lattice parameters and energy band, and charge distribution. The TiO₂/WO₃ heterojunction can abate photocorrosion through the hetero-epitaxial growth of TiO₂ (001) on WO₃ (002) for the lattice mismatch <3% eliminating dangling bonds, with high corrosion resistance and photostability of TiO₂. As the built-in field constructed by a staggered band alignment structure with the valence band offset (VBO) of 0.51 eV, the photogenerated carriers transfer and separation are promoted dramatically. Through the DFT calculations, the sunlight absorption wavelength can be extended, and the interfacial reaction kinetics can be expedited with the modification of carbon quantum dots (CQDs) on TiO₂/WO₃, due to the narrower bandgap (E_g) and the accumulation of electrons at TiO₂ side. The DFT designed CQDs/TiO₂/WO₃ photoanode significantly increase photocurrent density from 0.90 to 2.03 mA cm^-2 at 1.23 V, charge separation efficiency from 56.3 to 79.2% and charge injection efficiency from 51.2 to 70.4%, and extend light absorption edge from 455 to 463 nm over pristine WO₃, with better photostability and lower holes-to-water resistance.

Deposition of zinc cobaltite nanoparticles onto bismuth vanadate for enhanced photoelectrochemical water splitting

During the past few decades, photoelectrochemical (PEC) water splitting has attracted significant attention because of the reduced production cost of hydrogen obtained by utilizing solar energy. Significant efforts have been invested by the scientific community to produce stable ternary metal oxide semiconductors, which can enhance the stability and increase the overall production of oxygen. Herein, we present the ternary metal oxide deposition of ZnCo₂O₄ as a route to obtain a novel photocatalyst layer on BiVO₄ to form BiVO₄/ZnCo₂O₄ a novel composite photoanode for PEC water splitting. The structural, topographical, and optical analyses were performed using field emission scanning electron microscopy, X-ray diffraction, high-resolution transmission electron microscopy, and UV-Vis spectroscopy to confirm the structure of the ZnCo₂O₄ grafted over BiVO₄. A remarkable 4.4-fold enhancement of the photocurrent was observed for the BiVO₄/ZnCo₂O₄ composite compared with bare BiVO₄ under visible illumination. The optimum loading of ZnCo₂O₄ over BiVO₄ yields unprecedented stable photocurrent density with an apparent cathodic shift of 0.46 V under 1.5 AM simulated light illumination. This is also evidenced by the flat-band potential change through Mott-Schottky analysis, which reveals the formation of p-ZnCo₂O₄ on n-BiVO₄. The improvement in the PEC performance of the composite with respect to bare BiVO₄ is ascribed to the formation of thin passivating layer of p-ZnCo₂O₄ on n-BiVO₄ which improves the kinetics of interfacial charge transfer. Based on our study, we have gained an in-depth understanding of the BiVO₄/ZnCo₂O₄ composite as high potential in efficient PEC water splitting devices.

Engineering Nanostructure-Interface of Photoanode Materials Toward Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water oxidation based on semiconductor materials plays an important role in the production of clean fuel and value-added chemicals. Nanostructure-interface engineering has proven to be an effective way to construct highly efficient PEC water oxidation photoanodes with good light capture, carrier transport, and water oxidation kinetics. However, from theoretical and application perspectives, the relationship between the nanostructure and interface of photoanode materials and their PEC performance remains unclear. In this review, the PEC water oxidation reaction mechanism and evaluation criteria are briefly presented. The theoretical basis and research status of the nanostructure-interface engineering on constructing high-performance PEC water oxidation photoanodes are summarized and discussed. Finally, the current challenges and the future opportunities of nanostructure-interface engineering for the PEC reactions are pointed out.

Three-dimensional core-shell heterostructure of tungsten trioxide/bismuth molybdate/cobalt phosphate for enhanced photoelectrochemical water splitting

Hydrogen has attracted increasing attention as clean energy for fuel cells over the past decade. Photoelectrochemical (PEC) water splitting is considered the most feasible production method but its practical efficiency depends significantly on the photogeneration rate of electron (e^-) and hole (h⁺) on a semiconductor photoanode and the rapid separation of these charge carriers. A proper match of small and large bandgap positions is also necessary. This paper presents a three-dimensional core-shell heterostructured tungsten trioxide/bismuth molybdate/cobalt phosphate (WO₃/Bi₂MoO₆/Co-Pi) photocatalyst synthesized using simultaneous hydrothermal and electrodeposition techniques. Uniform Bi₂MoO₆ nanoflakes formed on WO₃ nanoplates as evidenced by various micro-spectroscopic techniques. The as-prepared WO₃/Bi₂MoO₆/Co-Pi hetero-photocatalyst exhibited significantly high photoelectrochemical activity, where its photocurrent efficiency was 4.6 times greater than that of the constituent WO_3. Such drastic improvement in the PEC properties can be corroborated by the appropriate bandgap alignment among WO₃, Bi₂MoO₆, and Co-Pi, resulting in a sufficient charge carrier density with efficient, fast charge-transport complementing their structural-morphological synergy. Furthermore, a heterojunction charge-transfer mechanism was proposed to verify the role of the co-catalyst, Co-Pi, in enhancing the photocurrent at the WO₃/Bi₂MoO₆ photoanode under the same applied bias.

Atomic Sandwiched p-n Homojunctions

Semiconductor p-n junctions have been explored and applied in photoelectrochemical (PEC) water splitting, but serious carrier recombination and sluggish oxygen evolution reaction (OER) dynamics have demanded further progress in p-n junction photoelectrode design. Here, via a controllable NH₃ treatment, we construct sandwiched p-n homojunctions in three-unit-cells n-type SnS₂ (n-SnS₂ ) nanosheet arrays using nitrogen (N) as acceptor dopants. The optimal N-doped n-SnS₂ (pnp-SnS₂ ) with such unique structure achieves a record photocurrent density of 3.28 mA cm^-2 , which is 21 times as high as that of n-SnS₂ and the highest value among all the SnS₂ photoanodes reported so far. Moreover, the stoichiometric O₂ and H₂ evolution from water was achieved with Faradaic efficiencies close to 100 %. The superior performance could be attributed to the facilitated electron-hole separation/transfer, accelerated surface OER kinetics, prolonged carrier lifetime, and improved structural stability.

Sensibilization of p-NiO with ZnSe/CdS and CdS/ZnSe quantum dots for photoelectrochemical water reduction

Core/shell quantum dots (QDs) paired with semiconductor photocathodes for water reduction have rarely been implemented so far. We demonstrate the integration of ZnSe/CdS and CdS/ZnSe QDs with porous p-type NiO photocathodes for water reduction. The QDs demonstrate appreciable enhancement in water-reduction efficiency, as compared with the bare NiO. Despite their different structure, both QDs generate comparable photocurrent enhancement, yielding a 3.8- and 3.2-fold improvement for the ZnSe/CdS@NiO and CdS/ZnSe@NiO system, respectively. Unraveling the carrier kinetics at the interface of these hybrid photocathodes is therefore critical for the development of efficient photoelectrochemical (PEC) proton reduction. In addition to examining the carrier dynamics by the Mott-Schottky technique and electrochemical impedance spectroscopy (EIS), we performed theoretical modelling for the distribution density of the carriers with respect to electron and hole wave functions. The electrons are found to be delocalized through the whole shell and can directly actuate the PEC-related process in the ZnSe/CdS QDs. The holes as the more localized carriers in the core have to tunnel through the shell before injecting into the hole transport layer (NiO). Our results emphasize the role of interfacial effects in core/shell QDs-based multi-heterojunction photocathodes.

A nano-surface monocrystalline BiVO4 nanoplate photoanode for enhanced photoelectrochemical performance

A nano-surface monocrystalline BiVO₄ photoanode with a large surface area is prepared by a low-cost and simple etching process.

Enhancing Charge Separation through Oxygen Vacancy-Mediated Reverse Regulation Strategy Using Porphyrins as Model Molecules

Highly efficient charge separation has been demonstrated as one of the most significant steps playing decisive roles in enhancing the overall efficiency of photoelectrochemical (PEC) processes. In this study, by employing 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin-Ni (NiTCPP) as a prototype, an oxygen vacancy (Vo)-mediated reverse regulation strategy is proposed for tuning hole transfer, which in turn can accelerate the transport of electrons and thus enhancing charge separation. The optimal NiO/NiTCPP system exhibits much higher (≈40 times) photocurrent and longer (≈13 times) lifetime of charge carriers compared with those of pure NiTCPP. Furthermore, the electron transfer kinetic rate constant (K_eff ) is quantitatively determined by an efficient scanning photoelectrochemical microscopy (SPECM). The K_eff of the optimal system has a 5.7-fold improvement. In addition, the similar enhancement in charge separation from other semiconductors (CoTCPP and FeTCPP) are also observed, indicating that the Vo-mediated reverse regulation strategy is a promising pathway for tuning the properties of light harvesters in solar energy conversion.

Tailoring the Surface Properties of Bi2O2NCN by in Situ Activation for Augmented Photoelectrochemical Water Oxidation on WO3 and CuWO4 Heterojunction Photoanodes

Bismuth(III) oxide-carbodiimide (Bi₂O₂NCN) has been recently discovered as a novel mixed-anion semiconductor, which is structurally related to bismuth oxides and oxysulfides. Given the structural versatility of these layered structures, we investigated the unexplored photochemical properties of the target compound for photoelectrochemical (PEC) water oxidation. Although Bi₂O₂NCN does not generate a noticeable photocurrent as a single photoabsorber, the fabrication of heterojunctions with the WO₃ thin film electrode shows an upsurge of current density from 0.9 to 1.1 mA cm^–2 at 1.23 V vs reversible hydrogen electrode (RHE) under 1 sun (AM 1.5G) illumination in phosphate electrolyte (pH 7.0). Mechanistic analysis and structural analysis using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and scanning transmission electron microscopy energy-dispersive X-ray spectroscopy (STEM EDX) indicate that Bi₂O₂NCN transforms during operating conditions in situ to a core–shell structure Bi₂O₂NCN/BiPO₄. When compared to WO₃/BiPO₄, the in situ electrolyte-activated WO₃/Bi₂O₂NCN photoanode shows a higher photocurrent density due to superior charge separation across the oxide/oxide-carbodiimide interface layer. Changing the electrolyte from phosphate to sulfate results in a lower photocurrent and shows that the electrolyte determines the surface chemistry and mediates the PEC activity of the metal oxide-carbodiimide. A similar trend could be observed for CuWO₄ thin film photoanodes. These results show the potential of metal oxide-carbodiimides as relatively novel representatives of mixed-anion compounds and shed light on the importance of the control over the surface chemistry to enable the in situ activation.

Phosphate electrolyte activates the metal oxide−Bi₂O₂NCN heterojunction.