The Mechanical Strength of a Mechanical Bond: Sonochemical Polymer Mechanochemistry of Poly(catenane) Copolymers

Mechanical scission of a knotted polymer

Molecular knots and entanglements form randomly and spontaneously in both biological and synthetic polymer chains. It is known that macroscopic materials, such as ropes, are substantially weakened by the presence of knots, but until now it has been unclear whether similar behaviour occurs on a molecular level. Here we show that the presence of a well-defined overhand knot in a polymer chain substantially increases the rate of scission of the polymer under tension (≥2.6× faster) in solution, because deformation of the polymer backbone induced by the tightening knot activates otherwise unreactive covalent bonds. The fragments formed upon severing of the knotted chain differ from those that arise from cleavage of a similar, but unknotted, polymer. Our solution studies provide experimental evidence that knotting can contribute to higher mechanical scission rates of polymers. It also demonstrates that entanglement design can be used to generate mechanophores that are among the most reactive described to date, providing opportunities to increase the reactivity of otherwise inert functional groups.

A Stretchable and Tough Graphene Film Enabled by Mechanical Bond

The pursuit of fabricating high-performance graphene films has aroused considerable attention due to their potential for practical applications. However, developing both stretchable and tough graphene films remains a formidable challenge. To address this issue, we herein introduce mechanical bond to comprehensively improve the mechanical properties of graphene films, utilizing [2]rotaxane as the bridging unit. Under external force, the [2]rotaxane cross-link undergoes intramolecular motion, releasing hidden chain and increasing the interlayer slip distance between graphene nanosheets. Compared with graphene films without [2]rotaxane cross-linking, the presence of mechanical bond not only boosted the strength of graphene films (247.3 vs 74.8 MPa) but also markedly promoted the tensile strain (23.6 vs 10.2 %) and toughness (23.9 vs 4.0 MJ/m3). Notably, the achieved tensile strain sets a record high and the toughness surpasses most reported results, rendering the graphene films suitable for applications as flexible electrodes. Even when the films were stretched within a 20 % strain and repeatedly bent vertically, the light-emitting diodes maintained an on-state with little changes in brightness. Additionally, the film electrodes effectively actuated mechanical joints, enabling uninterrupted grasping movements. Therefore, the study holds promise for expanding the application of graphene films and simultaneously inspiring the development of other high-performance two-dimensional films.

The propensity for covalent organic frameworks to template polymer entanglement

The introduction of molecularly woven three-dimensional (3D) covalent organic framework (COF) crystals into polymers of varying types invokes different forms of contact between filler and polymer. Whereas the combination of woven COFs with amorphous and brittle polymethyl methacrylate results in surface interactions, the use of the liquid-crystalline polymer polyimide induces the formation of polymer-COF junctions. These junctions are generated by the threading of polymer chains through the pores of the nanocrystals, thus allowing for spatial arrangement of polymer strands. This offers a programmable pathway for unthreading polymer strands under stress and leads to the in situ formation of high-aspect-ratio nanofibrils, which dissipate energy during the fracture. Polymer-COF junctions also strengthen the filler-matrix interfaces and lower the percolation thresholds of the composites, enhancing strength, ductility, and toughness of the composites by adding small amounts (~1 weight %) of woven COF nanocrystals. The ability of the polymer strands to closely interact with the woven framework is highlighted as the main parameter to forming these junctions, thus affecting polymer chain penetration and conformation.

A thermally driven rotaxane-catenane interconversion with a dynamic bis(hindered amino) disulfide

We have developed a versatile and simple synthetic method to produce a [3]catenane. Heating a rotaxane with bis(hindered amino) disulfide groups at both ends spontaneously and selectively produces the [3]catenane. The successful polymerization of the obtained [3]catenane provides a platform for the synthesis of various interlocking polymers.

Mechanochemical Degradation of Biopolymers

Mechanochemical treatment of various organic molecules is an emerging technology of green processes in biofuel, fine chemicals, or food production. Many biopolymers are involved in isolating, derivating, or modifying molecules of natural origin. Mechanochemistry provides a powerful tool to achieve these goals, but the unintentional modification of biopolymers by mechanochemical manipulation is not always obvious or even detectable. Although modeling molecular changes caused by mechanical stresses in cavitation and grinding processes is feasible in small model compounds, simulation of extrusion processes primarily relies on phenomenological approaches that allow only tool- and material-specific conclusions. The development of analytical and computational techniques allows for the inline and real-time control of parameters in various mechanochemical processes. Using artificial intelligence to analyze process parameters and product characteristics can significantly improve production optimization. We aim to review the processes and consequences of possible chemical, physicochemical, and structural changes.

Allosteric Binding-Induced Intramolecular Mechanical-Strain Engineering

Recently, polymer mechanochemistry has attracted much scientific interest due to its potential to develop degradable polymers. When the two ends of a polymer chain experience a linear pulling stress, molecular strain builds up, at sufficiently strong force, a bond scission of the weakest covalent bond results. In contrast, bond-breaking events triggered by conformational stress are much less explored. Here, we discovered that a Zn salen complex would undergo conformational switching upon allosteric complexation with alkanediammonium guests. By controlling the guest chain length, the torsional strain experienced by Zn complex can be modulated to induce bond cleavage with chemical stimulus, and reactivity trend is predicted by conformational analysis derived by DFT calculation. Such strain-release reactivity by a Zn(salen) complex initiated by guest binding is reminiscent of conformation-induced reactivity of enzymes to enable chemical events that are otherwise inhibited.

A Mortise-and-Tenon Joint Inspired Mechanically Interlocked Network

Mortise-and-tenon joints have been widely used for thousands of years in wooden architectures in virtue of their artistic and functional performance. However, imitation of similar structural and mechanical design philosophy to construct mechanically adaptive materials at the molecular level is a challenge. Herein, we report a mortise-and-tenon joint inspired mechanically interlocked network (MIN), in which the [2]rotaxane crosslink not only mimics the joint in structure, but also reproduces its function in modifying mechanical properties of the MIN. Benefiting from the hierarchical energy dissipative ability along with the controllable intramolecular movement of the mechanically interlocked crosslink, the resultant MIN simultaneously exhibits notable mechanical adaptivity and structural stability in a single system, as manifested by decent stiffness, strength, toughness, and deformation recovery capacity.

Modeling ultrasound-induced molecular weight decrease of polymers with multiple scissile azo-mechanophores

Selective and non-selective chain scission compete upon ultrasonic treatment of polymers with randomly distributed azo units.

Reversible Soft Mechanochemical Control of Biaryl Conformations through Crosslinking in a 3D Macromolecular Network

Tuning the dihedral angle (DA) of axially chiral compounds can impact biological activity, catalyst efficiency, molecular motor performance, or chiroptical properties. Herein, we report gradual, controlled, and reversible changes in molecular conformation of a covalently linked binaphthyl moiety within a 3D polymeric network by application of a macroscopic stretching force. We managed direct observation of DA changes by measuring the circular dichroism signal of an optically pure BINOL-crosslinked elastomer network. Stretching the elastomer resulted in a widening of the DA between naphthyl rings when the BINOL was doubly grafted to the elastomer network; no effect was observed when a single naphthyl ring of the BINOL was grafted to the elastomer network. We have determined that ca. 170 % extension of the elastomers led to the transfer of a mechanical force to the BINOL moiety of 2.5 kcal mol^-1  Å^-1 (ca. 175 pN) in magnitude and results in the opening of the DA of BINOL up to 130°.

Diselenide-Linked Polymers under Sonication

A series of Se-Se-linked polystyrenes have been synthesized and subjected to pulse sonication. Comprehensive investigations based on GPC measurements, derivatization experiments, and EPR spectroscopy verify the sonication-induced bond scission and metathesis of these polymeric diselenides. The metathesis kinetics and energy conversion efficiency by different stimuli including heating, light, and sonication are compared, which demonstrate that sonication can offer an alternative way to break the Se-Se bond and realize selective metathesis reactions between diselenide-linked polymers and small molecules. This fundamental study on sonochemistry of diselenide-centered polymers expands our knowledge of diselenide chemistry and mechanochemistry of dynamic covalent mechanophores, which may greatly advance the applications of diselenide-containing polymers.

A Catenane as a Mechanical Protecting Group

Mechanophores (mechanoresponsive molecules) offer great promises for the development of smart force-responsive materials. The activity of a mechanophore can be tuned by altering its structure or the composition of the actuating polymer. Here we show that a [2]catenane can act as a mechanical protecting group by diverting tensional forces away from a mechanically active functional group embedded in one of its rings. This property emerges from the mobility of the two rings of the catenane, which are able to rotate along each other until the tension equalizes over the entirety of the catenated framework. This approach provides a new way to control the mechanical activity of a mechanophore.

Polymer mechanochemistry-enabled pericyclic reactions

Polymer mechanochemical pericyclic reactions are reviewed with regard to their structural features and substitution prerequisites to the polymer framework.

Mechanochemical Fluorescence Switching in Polymers Containing Dithiomaleimide Moieties

Polymers that display useful mechanochemical responses, such as changes of their fluorescence characteristics, are attracting great interest. Here, we introduce the fluorescent dithiomaleimide (DTM) motif as a mechanofluorophore and report the mechanoresponse of two polymer types containing this motif. Poly(methyl acrylate) (PMA) and poly(ε-caprolactone)s (PCL) featuring one DTM moiety in the center of each chain (PMA-DTM and PCL-DTM) were synthesized by controlled radical and coordination-insertion ring-opening polymerizations using bifunctional DTM-containing initiators. Upon ultrasonic treatment of PMA-DTM or PCL-DTM of sufficiently high initial molecular weight, both the molecular weight and the fluorescence intensity decreased with similar kinetics, while no significant fluorescence changes were observed for DTM-free reference polymers. The results show that the DTM motif can serve as a mechanophore that displays a mechanically induced fluorescence turn-off.

Empowering mechanochemistry with multi-mechanophore polymer architectures

Multi-mechanophore polymers provide advantages in characterization and function relative to chain-centered, single mechanophore polymers.

Mechanochemistry of the mechanical bond

Strong and stable under tension?

Strong and stable under tension? In this review we present the recent efforts investigating the mechanochemical properties of interlocked structures by atomic force microscopy and polymer mechanochemistry.