ortho ‐C−H Arylation of Benzoic Acids with Aryl Bromides and Chlorides Catalyzed by Ruthenium

Rapid reaction optimization by robust and economical quantitative benchtop 19F NMR spectroscopy

The instrumental analysis of reaction mixtures is usually the rate-determining step in the optimization of chemical processes. Traditionally, reactions are analyzed by gas chromatography, HPLC or quantitative NMR spectroscopy on high-field spectrometers. However, chromatographic methods require elaborate work-up and calibration protocols, and high-field NMR spectrometers are expensive to purchase and operate. This protocol describes an inexpensive and highly effective analysis method based on low-field benchtop NMR spectroscopy. Its key feature is the use of fluorine-labeled model substrates that, because of the wide chemical shift range and high sensitivity of 19F, enable separate, quantitative detection of product and by-product signals even on low-field, permanent magnet spectrometers. An external lock/shim device obviates the need for deuterated solvents, permitting the direct, noninvasive measurement of crude reaction mixtures with minimal workup. The low field-strength facilitates a homogeneous excitation over a wide chemical shift range, minimizing systematic integration errors. The addition of the optimal amount of the nonshifting relaxation agent tris(acetylacetonato) iron(III) minimizes relaxation delays at full resolution, reducing the analysis time to 32 s per sample. The correct choice of processing parameters is also crucial. A step-by-step guideline is provided, the influence of all parameters, including adjustments needed when using high-field spectrometers, is discussed and potential pitfalls are highlighted. The wide applicability of the analytical protocol for reaction optimization is illustrated by three examples: a Buchwald-Hartwig amination, a Suzuki coupling and a C-H arylation reaction.

Ruthenium-Catalyzed C-H Arylation of Aromatic Acids with ortho-Haloaniline To Access Phenanthridinones

Phenanthridinone is a significant moiety in pharmaceutical and material science; thus, it is highly desirable to develop an efficient and robust method to construct phenanthridinone from readily available starting materials. Herein, we report a Ru-catalyzed C-H arylation of aromatic carboxylic acids with ortho-haloanilines, followed by intramolecular dehydration to afford phenanthridinones in high yields.

Dearomatization of (Hetero)arenes through Photodriven Interplay between Polysulfide Anions and Formate

The facile construction of C(sp3 )-rich carbo- and heterocyclic compounds is a pivotal synthetic strategy to foster contemporary drug discovery programs. The downstream dearomatization of readily accessible two-dimensional (2D) planar arenes represents a direct pathway towards accessing three-dimensional (3D) aliphatic scaffolds. Here, we demonstrate that polysulfide anions are capable of catalyzing a dearomatization process of substituted naphthalenes, indoles, and other related heteroaromatic compounds in the presence of potassium formate and methanol under visible light irradiation. The developed protocol exhibits broad functional group tolerance, operational simplicity, scalability, and cost-effectiveness, representing a practical and sustainable synthetic tool for the arene dearomatization.

The crucial role of silver(I)-salts as additives in C-H activation reactions: overall analysis of their versatility and applicability

Transition-metal catalyzed C-H activation reactions have been proven to be useful methodologies for the assembly of synthetically meaningful molecules. This approach bears intrinsic peculiarities that are important to be studied and comprehended in order to achieve its best performance. One example is the use of additives for the in situ generation of catalytically active species. This strategy varies according to the type of additive and the nature of the pre-catalyst that is being used. Thus, silver(I)-salts have proven to play an important role, due to the resulting high reactivity derived from the pre-catalysts of the main transition metals used so far. While being powerful and versatile, the use of silver-based additives can raise concerns, since superstoichiometric amounts of silver(I)-salts are typically required. Therefore, it is crucial to first understand the role of silver(I) salts as additives, in order to wisely overcome this barrier and shift towards silver-free systems.

Molecular Engineering of Chalcogen-Embedded Anthanthrenes via peri-Selective C-H Activation: Fine-Tuning of Crystal Packing for Organic Field-Effect Transistors

Disclosed herein is a RhCl₃ -catalyzed peri-selective C-H/C-H oxidative homo-coupling of 1-substituted naphthalenes, which provides a highly efficient and streamlined approach to chalcogen-embedded anthanthrenes from readily available starting materials. Introducing O, S, and Se into the anthanthrene skeleton leads to gradually increased π-π stacking distances but significantly enhanced π-π overlaps with the growth of the hetero-atom radius. Moderate π-π distance, overlap area, and intermolecular S-S interactions endow S-embedded anthanthrene (PTT) with excellent 2D charge-transport properties. Moreover, the transformation of p-type to n-type S-embedded anthanthrenes is realized for the first time via the S-atom oxidation from PTT to PTT-O4. In organic field-effect transistor devices, PTT derivatives exhibit hole transport with mobilities up to 1.1 cm²  V^-1  s^-1 , while PTT-O4 shows electron transport with a mobility of 0.022 cm²  V^-1  s^-1 .

Ru(II)-Catalyzed Hydroarylation of in situ Generated 3,3,3-Trifluoro-1-propyne by C-H Bond Activation: A Facile and Practical Access to β-Trifluoromethylstyrenes

In this study, a practical and straightforward synthesis of β-(E)-trifluoromethylstyrenes by ruthenium-catalyzed C-H bond activation was developed. The readily available and inexpensive 2-bromo-3,3,3-trifluoropropene (BTP), a non-ozone depleting reagent, was used as a reservoir of 3,3,3-trifluoropropyne. With this approach, the monofunctionalization of a panel of heteroarenes was possible in a safe and scalable manner (23 examples, up to 87 % yield). Mechanistic investigations and density functional theory (DFT) calculations were also conducted to get a better understanding of the mechanism of this transformation. These studies suggested that 1) a cyclometallated ruthenium complex enabled the transformation, 2) this complex exhibited high efficiency in this transformation compared to the commercially available [RuCl2 (p-cymene)]2 and 3) the mechanism proceeded through a bis-cyclometallated ruthenium intermediate for the carboruthenation step.

Concise Syntheses of Alternariol, Alternariol-9-monomethyl Ether and Their D3-Isotopologues

Alternariol (AOH) and alternariol-9-monomethyl ether (AME) are two secondary metabolites of Alternaria fungi which can be found in various foodstuffs like tomatoes, nuts, and grains. Due to their toxicity and potential mutagenic activity the need for the development of high-throughput methods for the supervision of AOH and AME levels is of increasing interest. As the availability of both native and labeled AOH and AME analytical standards is very limited, we herein present a novel and concise approach towards their synthesis by employing a ruthenium-catalyzed ortho-arylation as the key step. Finally, we demonstrate their suitability as internal standards in stable-isotope dilution assay (SIDA)-HPLC-MS/MS analysis, a technique commonly used for the quantification of natural products in food and feed.

RhIII-Catalyzed C-H N-Heteroarylation and Esterification Cascade of Carboxylic Acid with Organoboron Reagents and 1,2-Dichloroethane in One-Pot Synthesis

A Rh^III-catalyzed C(sp²)-H N-heteroarylation and esterification cascade of aryl carboxylic acids with N-heteroaromatic boronates and 1,2-dichloroethane in a one-pot synthesis has been disclosed. The strong coordinating ability of ortho- and meta-substituted pyridine boronates and pyrazoles as well as unsubstituted pyrimidine allows them to serve as the coupling partners. This protocol allows late-stage modification of the key precursor of roflumilast and compounds of pharmaceutical interest, which highlights the potential application of this synthetic method.

Ru-Catalyzed C-H Arylation of Acrylic Acids with Aryl Bromides

In the presence of a [Ru(p-cymene)Cl₂]₂/triethylphosphine/lithium carbonate catalyst system, aryl bromides undergo (Z)-selective couplings with unprotected 2-arylacrylic acids to form (Z)-diarylacrylic acids. This vinylic C-H functionalization proceeds in high yields of up to 94% and (Z/E)-ratios of up to 99:1, tolerating a wide range of functional groups. Mechanistic studies indicate that the vinylic C-H activation proceeds via base-assisted cyclometalation rather than via a Heck-type mechanism, which explains its orthogonal stereoselectivity.

Overcoming peri- and ortho-selectivity in C–H methylation of 1-naphthaldehydes by a tunable transient ligand strategy

This work provides a highly regioselective peri- and ortho-C–H methylation of 1-naphthaldehyde by using a transient ligand strategy, enabling practical synthesis of multi-substituted naphthalene-based bioactive molecules and natural products.

Palladium/Norbornene-Catalyzed Decarbonylative Difunctionalization of Thioesters

The transition-metal-catalyzed decarboxylation of aryl carboxylic acids has drawn significant attention as an efficient and practical tool for the synthesis of substituted arenes. However, the decarboxylative construction of polysubstituted arenes with different contiguous substituents has not been widely reported. Herein, we describe a novel decarbonylative Catellani reaction via palladium-catalyzed, norbornene (NBE)-mediated polyfunctionalization of aromatic thioesters, which serve as readily available carboxylic acid derivatives. A variety of alkenyl, alkyl, aryl, and sulfur moieties could be conveniently introduced into the ipso-positions of the aromatic thioesters. By combining carboxyl-directed C-H functionalization and the classical Catellani reaction, our protocol allows for the construction of 1,2,3-trisubstituted and 1,2,3,4-tetrasubstituted arenes from simple aromatic acids. Furthermore, the late-stage functionalization of a series of drug molecules highlights the potential utility of the reaction.

Palladium Catalyzed Regioselective Cyclization of Arylcarboxylic Acids via Radical Intermediates with Diaryliodonium Salts

Palladium-catalyzed C₂-arylation/intramolecular acylation with arylcarboxylic acids was developed by using diaryliodonium salts. The protocol has the advantage of good step-economy by two chemical bonds formation in one pot.

Toolbox for Distal C-H Bond Functionalizations in Organic Molecules

Transition metal catalyzed C-H activation has developed a contemporary approach to the omnipresent area of retrosynthetic disconnection. Scientific researchers have been tempted to take the help of this methodology to plan their synthetic discourses. This paradigm shift has helped in the development of industrial units as well, making the synthesis of natural products and pharmaceutical drugs step-economical. In the vast zone of C-H bond activation, the functionalization of proximal C-H bonds has gained utmost popularity. Unlike the activation of proximal C-H bonds, the distal C-H functionalization is more strenuous and requires distinctly specialized techniques. In this review, we have compiled various methods adopted to functionalize distal C-H bonds, mechanistic insights within each of these procedures, and the scope of the methodology. With this review, we give a complete overview of the expeditious progress the distal C-H activation has made in the field of synthetic organic chemistry while also highlighting its pitfalls, thus leaving the field open for further synthetic modifications.

Biaryl Synthesis via Electrooxidative Transition-Metal-Catalyzed C–H Activation

The use of electricity as an inexpensive and waste-free oxidant opens up new opportunities for the development of sustainable C–H functionalization reactions. Herein we summarize recent advances in the synthesis of biaryls through electrooxidative processes involving transition-metal-catalyzed ortho-directed C–H activation. A particular focus is set on electrooxidative C–H/C–M couplings and dehydrogenative couplings.

1 Introduction

2 Electrooxidative C–H/C–M Couplings

3 Electrooxidative C–H/C–H Couplings

4 Conclusion and Outlook

Ru-Catalyzed (E)-Specific ortho-C-H Alkenylation of Arenecarboxylic Acids by Coupling with Alkenyl Bromides

In the presence of [p-cymene)RuCl₂]₂, (E)-configured alkenyl bromides couple with aromatic carboxylates to form ortho-vinylbenzoic acids. This C-H vinylation proceeds in high yields without any activating phosphine ligands and has an excellent functional group tolerance. Starting from commonly available (E/Z )-mixtures of alkenyl bromides, (E)-configured vinyl arenes or dienes are formed exclusively. Mechanistic studies show that this selectivity is achieved because the (E)-configured alkenyl bromides undergo a smooth coupling, whereas the (Z)-isomers are rapidly eliminated with the formation of alkynes.

Rhodium-Catalyzed C4-Selective C-H Alkenylation of 2-Pyridones by Traceless Directing Group Strategy

A rhodium-catalyzed C4-selective C-H alkenylation of 3-carboxy-2-pyridones with styrenes has been developed. The carboxylic group at the C3 position works as the traceless directing group, and the corresponding C4-alkenylated 2-pyridones are obtained exclusively with concomitant decarboxylation. Unlike the reported procedures, the exclusive C4 selectivity is uniformly observed even in the presence of potentially more reactive C-H bonds at the C5 and C6 positions. By using this strategy, the multiply substituted 2-pyridone can be prepared via sequential C-H functionalization reactions.

Size-Driven Inversion of Selectivity in Esterification Reactions: Secondary Beat Primary Alcohols

Relative rates for the Lewis base-mediated acylation of secondary and primary alcohols carrying large aromatic side chains with anhydrides differing in size and electronic structure have been measured. While primary alcohols react faster than secondary ones in transformations with monosubstituted benzoic anhydride derivatives, relative reactivities are inverted in reactions with sterically biased 1-naphthyl anhydrides. Further analysis of reaction rates shows that increasing substrate size leads to an actual acceleration of the acylation process, the effect being larger for secondary as compared to primary alcohols. Computational results indicate that acylation rates are guided by noncovalent interactions (NCIs) between the catalyst ring system and the DED substituents in the alcohol and anhydride reactants. Thereby stronger NCIs are formed for secondary alcohols than for primary alcohols.

Palladium-catalyzed C8–H arylation and annulation of 1-naphthalene carboxylic acid derivatives with aryl iodides

Disclosed herein is palladium-catalyzed C8–H arylation and annulation of 1-naphthoic acid derivatives with aryl iodides in a low reactant molar ratio via an electrophilic aromatic substitution (S_EAr) process.

Regioselective C-H Alkenylation and Unsymmetrical Bis-olefination of Heteroarene Carboxylic Acids with Ruthenium Catalysis in Water

An efficient weak carboxylate-assisted oxidative cross-dehydrogenative C-H/C-H coupling (CDC) of heteroarenes with readily available olefins has been devised employing water as green solvent under ruthenium(II) catalysis. The reaction is operationally simple, accommodates a large variety of heteroaromatic carboxylic acids as well as olefins, and facilitates a diverse array of high-value olefin-tethered heteroarenes in high yields (up to 87%). The potential of this ortho-C-H bond activation strategy has also been exploited toward tunable synthesis of densely functionalized heteroarenes through challenging unsymmetrical bis-olefination process in a one-pot sequential fashion. Mechanistic investigation demonstrates a reversible ruthenation process and C-H metalation step might not be involved in the rate-determining step.

Palladium-Catalyzed Site-Selective Benzocyclization of Naphthoic Acids with Diaryliodonium Salts: Efficient Access to Benzanthrones

Dual activation of both C-I and vicinal C-H bonds of diaryliodonium salts allowing for diarylation is a subject of rapid construction of π-extended frameworks. Here, we report palladium-catalyzed cascade of C₈-arylation/intramolecular Friedel-Crafts acylation of α-naphthoic acids in the synthesis of benzanthrone derivatives. The step-economical protocol tolerates various substrates, which resulted in a potential molecular library for developing functional polycyclic scaffolds. The approach relies on the synergistic action of strong acid with palladium catalysts to form two bonds in a one-pot procedure.

Insights into Ruthenium(II/IV)-Catalyzed Distal C-H Oxygenation by Weak Coordination

C-H hydroxylation of aryl acetamides and alkyl phenylacetyl esters was accomplished via challenging distal weak O-coordination by versatile ruthenium(II/IV) catalysis. The ruthenium(II)-catalyzed C-H oxygenation of aryl acetamides proceeded through C-H activation, ruthenium(II/IV) oxidation and reductive elimination, thus providing step-economical access to valuable phenols. The p-cymene-ruthenium(II/IV) manifold was established by detailed experimental and DFT-computational studies.

Copper-catalyzed remote C-H arylation of polycyclic aromatic hydrocarbons (PAHs)

The regioselective C–H arylation of substituted polycyclic aromatic hydrocarbons (PAHs) is a desired but challenging task. A copper-catalyzed C7–H arylation of 1-naphthamides has been developed by using aryliodonium salts as arylating reagents. This protocol does not need to use precious metal catalysts and tolerates wide variety of functional groups. Under standard conditions, the remote C–H arylation of other PAHs including phenanthrene-9-carboxamide, pyrene-1-carboxamide and fluoranthene-3-carboxamide has also accomplished, which provides an opportunity for the development of diverse organic optoelectronic materials.

Rhodium(iii)-catalyzed carboxylate-directed ortho-selective thiolation of benzoic acids

A rhodium-catalyzed carboxylate-directed thiolation reaction has been developed for constructing C–S bonds on benzoic acids, and the key precursor of roflumilast can be furnished via this reaction.

Ruthenium-Catalyzed C-H Arylation of 1-Naphthol with Aryl and Heteroaryl Halides

While 8-aryl-1-napthols are promising dye molecules and useful intermediates in the synthesis of polycyclic aromatic hydrocarbons, they can be difficult to access. A new, ruthenium-catalyzed method for peri-C-H arylation of 1-naphthol with a variety of aryl and heteroaryl halides (iodides, bromides) is reported that overcomes the limitations of previous palladium-catalyzed approaches. Yields for the 21 examples range from 16 to 99%, with an average of 71%, and the reaction tolerates a variety of functional groups: pyridine, pyrimidine, primary aniline, aldehyde, and ester.

Palladium-Catalyzed C8-Arylation of Naphthalenes through C-H Activation: A Combined Experimental and Computational Study

Herein, a direct C8-arylation reaction of 1-amidonaphthalenes is described. By using diaryliodonium salts as arylating agents, the palladium-catalyzed C-H activation reaction showed perfect C8 regioselectivity and a wide functional group tolerance. In most cases, the desired polyaromatic compounds were isolated in good to excellent yields. To explain the observed regioselectivity, DFT calculations were performed and highlighted the crucial role of the amide directing group. Finally, the utility of this method is showcased by the synthesis of benzanthrone derivatives.

Catalytic Enantioselective Methylene C(sp3 )-H Amidation of 8-Alkylquinolines Using a Cp*RhIII /Chiral Carboxylic Acid System

Catalytic enantioselective directed methylene C(sp³ )-H amidation reactions of 8-alkylquinolines using a Cp*Rh^III /chiral carboxylic acid (CCA) hybrid catalytic system are described. A binaphthyl-based chiral carboxylic acid efficiently differentiates between the enantiotopic methylene C-H bonds, which leads to the formation of C-N bonds with good enantioselectivity.

Arene-Free Ruthenium(II/IV)-Catalyzed Bifurcated Arylation for Oxidative C-H/C-H Functionalizations

Experimental and computational studies provide detailed insight into the selectivity- and reactivity-controlling factors in bifurcated ruthenium-catalyzed direct C-H arylations and dehydrogenative C-H/C-H functionalizations. Thorough investigations revealed the importance of arene-ligand-free complexes for the formation of biscyclometalated intermediates within a ruthenium(II/IV/II) mechanistic manifold.

Site-selective C-H activation and regiospecific annulation using propargylic carbonates

Herein we describe an unprecedented RuII-catalyzed site-selective and regiospecific annulation of benzoic acids with propargylic carbonates. The weakly coordinating carboxylic acid moiety outperformed other typically used directing groups in C-H activation, including ketone, nitrile, sulfonamide, amide and strongly coordinating nitrogen heterocycles. This is an important step towards the application of C-H activation reactions in complex (functional) real-world molecules.

An Efficient, One-Pot Transamidation of 8-Aminoquinoline Amides Activated by Tertiary-Butyloxycarbonyl

The efficient, one-pot access to the transamidation of 8-aminoquinoline (8-AQ), notorious for its harsh removal conditions, has been widely employed as an auxiliary in C⁻H functionalization reactions due to its strong directing ability. In this study, the facile and mild Boc protection of the corresponding 8-AQ amide was critical to activate the amide C(acyl)⁻N bond by twisting its geometry to lower the amidic resonance energy. Both aryl and alkyl amines proceeded transamidation in one-pot, user-friendly conditions with excellent yields.

Rhodium(iii)-catalyzed cascade reactions of benzoic acids with dioxazolones: discovery of 2,5-substituted benzoxazinones as AIE molecules

Rhodium-catalyzed cascade reactions of benzoic acids with 1,4,2-dioxazol-5-ones afford 2,5-substituted benzoxazinones, which exhibited AIE properties with an ESIPT phenomenon.