Highly Selective Hydroboration of Alkenes, Ketones and Aldehydes Catalyzed by a Well-Defined Manganese Complex

Hydroboration of Terminal Alkynes Catalyzed by a Mn(I) Alkyl PCP Pincer Complex Following Two Diverging Pathways

A stereo- and regioselective Mn(I)-catalyzed hydroboration of terminal alkynes with pinacolborane (HBPin) is described. The hydroboration reaction is highly Z-selective in the case of aryl alkynes and E-selective in the case of aliphatic alkynes. The reaction requires no additives or solvents and proceeds with a catalyst loading of 1 mol % at 50-70 °C. The most active precatalyst is the bench-stable alkyl Mn(I) complex cis-[Mn(PCP-iPr)(CO)2(CH2CH2CH3)]. The catalytic process is initiated by the migratory insertion of a CO ligand into the Mn-alkyl bond to yield an acyl intermediate. This species undergoes C-H and B-H bond cleavage of the alkyne (aromatic alkynes) and HBPin (in the case of aliphatic alkynes) forming the active Mn(I) alkynyl and boryl catalysts [Mn(PCP-iPr)(CO)(C≡CR)] and [Mn(PCP-iPr)(CO)(BPin)], respectively. A broad variety of aromatic and aliphatic alkynes was efficiently and selectively borylated. Mechanistic insights are provided based on experimental data and DFT calculations. The functionalized alkenes can be used for further applications in cross-coupling reactions.

Pd-Catalyzed Hydroboration of Vinylarenes with B2pin2

A palladium(II)-catalyzed Markovnikov hydroboration of aryl alkenes with readily available bis(pinacolato)diboron (B2pin2) is reported. The reaction proceeded with low catalyst loading (0.5 mol %) in the absence of N- or P-containing ligands, affording the products in up to 90% yield. Trifluoracetic acid serves as the hydrogen source, enabling the synthesis of benzylic boronic esters under mild ambient conditions.

Air-Stable Iron(III) Salen Complexes for Selective Hydroboration of Ketones and Unactivated Imines without Base Activation

Herein, we designed and synthesized a series of air-stable, cost-effective, and readily synthesizable iron(III) salen complexes (Fe-1 and Fe-2) for facilitating the selective hydroboration of ketones and unactivated imines with pinacolborane in the absence of any additive. These catalyst systems exhibited good yields, chemoselectivity, high atom economy, and a broad substrate scope under mild reaction conditions with a minimal catalyst loading of 0.2 mol %. The catalytic efficiency of Fe-1 has been demonstrated through the hydroboration of diverse aromatic, aliphatic, and heterocyclic ketones and imines with a turnover number of up to 1000, highlighting its broad substrate scope. Ketones are chemoselectively hydroborated over other functional groups such as imines, alkenes, esters, nitriles, acids, and alcohols. Besides, the synthetic utility of this strategy has also been showcased by the construction of a natural chiral monoterpenoid carveol. This protocol can be readily scaled up for gram-scale synthesis of alcohols, which underscores the potential industrial applicability of our catalyst system in the synthesis of secondary alcohols on a larger scale.

Defect-engineering improves the activity of Metal-Organic frameworks for catalyzing hydroboration of Alkynes: A combination of experimental investigation and Density functional theory calculations

Defect-engineered metal-organic frameworks (DEMOFs) are emerging advanced materials. The construction of DEMOFs is of great significance; however, DEMOF-based catalysis remains unexplored. (E)-vinylboronates, an important building block for asymmetric synthesis, can be synthesized via the hydroboration of alkynes. However, the lack of high-performance catalysts considerably hinders their synthesis. Herein, a series of DEHKUST-1 (HKUST = Hong Kong University of Science and Technology) (Da-f) catalysts with missing occupation of linkers at Cu nodes were designed by partially replacing benzene-1,3,5-tricarboxylate (H3BTC) with defective connectors of pyridine-3,5-dicarboxylate (PYDC) to efficiently promote the hydroboration of alkynes. Results showed that the Dd containing 0.8 doping ratio of PYDC exhibited remarkable catalytic activity than the defect-free HKUST-1. This originated from the improved accessibility for reactants towards the Lewis acid active Cu sites of DEHKUST-1 due to the presence of plenty of rooms next to the Cu sites and enhanced coordination ability in such 'defective' HKUST-1. Dd had high selectivity (>99 %) and yield (>96 %) for (E)-vinylboronates and extensive functional group compatibility for terminal alkynes. Density functional theory (DFT) calculations were performed to elucidate the mechanism of hydroboration. Compared with that of defect-free HKUST-1, the low energy barrier of DEHKUST-1 can be attributed to the lower coordination number of Cu sites and enhanced accessibility of Cu active sites towards reagents.

Ligand-free MnBr2-Catalyzed Chemo- and Stereoselective Hydroboration of Terminal Alkynes

Developing simple and benign protocols for synthesizing alkenylboronates is crucial as they are synthetically valuable compounds in various organic transformations. In this work, we report a straightforward ligand-free protocol for synthesizing alkenylboronates via atom-economical hydroboration of alkynes with HBpin catalyzed by a manganese salt. The reaction shows a high level of chemo and regioselectivity for the terminal alkynes and exclusively produces E-selective alkenylboronates. The hydroboration scope is vast, with the resilience of a range of synthetically beneficial functionalities, such as halides, ether, alkenyl, silyl and thiophenyl groups. This reaction proceeds through the involvement of a metal-hydride intermediate. The developed alkenylboronate can be smoothly converted to useful C-C, C-N and C-I bond-forming reactions.

Catalytic acceptorless dehydrogenative borylation of styrenes enabled by a molecularly defined manganese complex

In this study, we employed a 3d metal complex as a catalyst to synthesize alkenyl boronate esters through the dehydrogenative coupling of styrenes and pinacolborane. The process generates hydrogen gas as the sole byproduct without requiring an acceptor, rendering it environmentally friendly and atom-efficient. This methodology demonstrated exceptional selectivity for dehydrogenative borylation over direct hydroboration. Additionally, it exhibited a preference for borylating aromatic alkenes over aliphatic ones. Notably, derivatives of natural products and bioactive molecules successfully underwent diversification using this approach. The alkenyl boronate esters served as precursors for the synthesis of various pharmaceuticals and potential anticancer agents. Our research involved comprehensive experimental and computational studies to elucidate the reaction pathway, highlighting the B-H bond cleavage as the rate-determining step. The catalyst's success was attributed to the hemilability and metal-ligand bifunctionality of the ligand backbone.

Synthesis and Characterization of Bipyridyl-(Imidazole)n Mn(II) Compounds and Their Evaluation as Potential Precatalysts for Water Oxidation

Metalloenzymes make extensive use of manganese centers for oxidative catalysis, including water oxidation; the need to develop improved synthetic catalysts for these processes has long motivated the development of bioinspired manganese complexes. Herein, we report a series of bpy-(imidazole)n (n = 1 or 2) (bpy = 2,2'-bipyridyl) ligands and their Mn2+ complexes. Four Mn2+ complexes are structurally characterized using single-crystal X-ray diffraction, revealing different tridentate and tetradentate ligand coordination modes. Cyclic voltammetry of the complexes is consistent with ligand-centered reductions and metal-centered oxidations, and UV-vis spectroscopy complemented by TD-DFT calculations shows primarily ligand-centered transitions with minor contributions from charge-transfer type transitions at higher energies. In solution, ESI-MS studies provide evidence for ligand reorganization, suggesting complex speciation behavior. The oxidation of the complexes in the presence of water is probed using cyclic voltammetry, but the low stability of the complexes in aqueous solution leads to decomposition and precludes their ultimate application as aqueous electrocatalysts. Possible reasons for the low stability and suggestions for improvement are discussed.

Homoleptic octahedral CoII complexes as precatalysts for regioselective hydroboration of alkenes with high turnover frequencies

Homoleptic complexes adopting octahedral coordination modes are usually less active in catalysis due to the saturated coordination around metal centers that prevents substrate activation in a catalytic event. In this work, we demonstrated that a homoleptic octahedral cobalt complex (1) of 4'-pyridyl-2,2';6',2''-terpyridine that experienced monoprotonation at the non-coordinating pyridyl moiety upon crystallization could serve as a highly efficient precatalyst for the hydroboration of styrene derivatives with Markovnikov selectivity. The solid-state structure of this precatalyst along with relevant homoleptic CoII and FeII complexes has been characterized by X-ray crystallography. In the solid state, 1 features one-dimensional hydrogen-bonded chains that are further stacked by interchain π⋯π interactions. The newly synthesized complexes (1-3) along with several known analogues (4-6) were examined as precatalysts for the hydroboration of alkenes. The best-performing system, 1/KOtBu was found to promote Markovnikov hydroboration of substituted styrenes with high turnover frequencies (TOFs) up to ∼47 000 h-1, comparable to the most efficient polymeric catalyst [Co(pytpy)Cl2]n reported to date. Although some limitations in substrate scope as well as functional group tolerance exist, the catalyst shows good promise for several relevant hydrofunctionaliation reactions.

Vanadium-catalysed regioselective hydroboration of epoxides for synthesis of secondary alcohols

Regioselective epoxide ring-opening through hydroboration catalysed by a vanadium(III) dialkyl complex supported by a redox-active terpyridine ligand is reported. Secondary alcohols were obtained in high yields via effective Markovnikov hydroboration of terminal epoxides, showcasing a new catalytic application of an earth-abundant vanadium(III) complex.

Trans Ligand Determines the Stability of Paramagnetic Manganese(II) Hydrides of the Type trans-[MnH(L)(dmpe)2]+ Where L is PMe3, C2H4, or CO

Paramagnetic metal hydride (PMH) complexes play important roles in catalytic applications and bioinorganic chemistry. 3d PMH chemistry has largely focused on Ti, Mn, Fe, and Co. Various Mn^II PMHs have been proposed as intermediates in catalysis, but isolated Mn^II PMHs are limited to dimeric high-spin Mn^II structures with bridging hydrides. In this paper, a series of the first low-spin monomeric Mn^II PMH complexes are generated by chemical oxidation of their Mn^I analogues. This series is of the type trans-[MnH(L)(dmpe)₂]^+/0 where the trans ligand L is PMe₃, C₂H₄, or CO [dmpe is 1,2-bis(dimethylphosphino)ethane], and the thermal stability of the Mn^II hydride complexes was found to be strongly dependent on the identity of the trans ligand. When L is PMe₃, the complex is the first example of an isolated monomeric Mn^II hydride complex. In contrast, when L is C₂H₄ or CO, the complexes are only stable at low temperatures; upon warming to room temperature, the former decomposed to afford [Mn(dmpe)₃]⁺, accompanied by ethane and ethylene, whereas the latter eliminated H₂, generating [Mn(MeCN)(CO)(dmpe)₂]⁺ or a mixture of products including [Mn(κ¹-PF₆)(CO)(dmpe)₂], depending on the reaction conditions. All PMHs were characterized by low-temperature electron paramagnetic resonance (EPR) spectroscopy, and stable [MnH(PMe₃)(dmpe)₂]⁺ was further characterized by UV-vis and IR spectroscopy, Superconducting Quantum Interference Device magnetometry, and single-crystal X-ray diffraction. Noteworthy spectral properties are the significant EPR superhyperfine coupling to the hydride (∼85 MHz) and an increase (+33 cm^-1) in the Mn-H IR stretch upon oxidation. Density functional theory calculations were also employed to gain insights into the acidity and bond strengths of the complexes. Mn^II-H bond dissociation free energies are estimated to decrease in the series of complexes from 60 (L = PMe₃) to 47 kcal/mol (L = CO).

An ionic Fe-based metal-organic-framework with 4'-pyridyl-2,2':6',2''-terpyridine for catalytic hydroboration of alkynes

An ionic metal-organic-framework (MOF) containing nanoscale channels was readily assembled from ditopic 4'-pyridyl-2,2':6',2''-terpyridine (pytpy) and a simple iron(ii) salt. X-ray structural analysis revealed a two-dimensional grid-like framework assembled by classic octahedral (pytpy)2FeII cations as linkers (with pytpy as a new ditopic pyridyl ligand) and octa-coordinate FeCl2 centers as nodes. The layer-by-layer assembly of the 2-D framework resulted in the formation of 3-D porous materials consisting of nano-scale channels. The charges of the cationic framework were balanced with anionic Cl3FeOFeCl3 in its void channels. The new Fe-based MOF material was employed as a precatalyst for syn-selective hydroboration of alkynes under mild, solvent-free conditions in the presence of an activator, leading to the synthesis of a range of trans-alkenylboronates in good yields. The larger scale applicability and recyclability of the new MOF catalyst was further explored. This represents a rare example of an ionic MOF material that can be utilized in hydroboration catalysis.

Homogeneous Manganese-Catalyzed Hydrofunctionalizations of Alkenes and Alkynes: Catalytic and Mechanistic Tendencies

In recent years, many manganese-based homogeneous catalytic precursors have been developed as powerful alternatives in organic synthesis. Among these, the hydrofunctionalizations of unsaturated C-C bonds correspond to outstanding ways to afford compounds with more versatile functional groups, which are commonly used as building blocks in the production of fine chemicals and feedstock for the industrial field. Herein, we present an account of the Mn-catalyzed homogeneous hydrofunctionalizations of alkenes and alkynes with the main objective of finding catalytic and mechanistic tendencies that could serve as a platform for the works to come.

Zn-Catalyzed Regioselective and Chemoselective Reduction of Aldehydes, Ketones and Imines

An operationally convenient Zn-catalyzed synthesis of alcohols by the reduction of aldehydes, ketones, and α,β-unsaturated aldehydes/ketones is reported. It is a rare example of using mild and sustainable HBpin as a reductant for catalytic reduction of carbonyl compounds in the absence of acid or base as hydrolysis reagent. The reaction is upscalable and proceeds in high selectivity without the formation of boronate ester by-products, and tolerates sensitive functionalities, such as iodo, bromo, chloro, fluoro, nitro, trifluoromethyl, aminomethyl, alkynyl, and amide. The Zn(OAc)₂/HBpin combination has been also proved to be chemoselective for the C=N reduction of imine analogs.

Manganese Alkyl Carbonyl Complexes: From Iconic Stoichiometric Textbook Reactions to Catalytic Applications

The activation of weakly polarized bonds represents a challenging, yet highly valuable process. In this context, precious metal catalysts have been used as reliable compounds for the activation of rather inert bonds for the last several decades. Nevertheless, base-metal complexes including cobalt, iron, or nickel are currently promising candidates for the substitution of noble metals in order to develop more sustainable processes. In the past few years, manganese(I)-based complexes were heavily employed as efficient catalysts for (de)hydrogenation reactions. However, the vast majority of these complexes operate via a metal-ligand bifunctionality as already well implemented for precious metals decades ago. Although high reactivity can be achieved in various reactions, this concept is often not applicable to certain transformations due to outer-sphere mechanisms. In this Account, we outline the potential of alkylated Mn(I)-carbonyl complexes for the activation of nonpolar and moderately polar E-H (E = H, B, C, Si) bonds and disclose our successful approach for the utilization of complexes in the field of homogeneous catalysis. This involves the rational design of manganese complexes for hydrogenation reactions involving ketones, nitriles, carbon dioxide, and alkynes. In addition to that, the reduction of alkenes by dihydrogen could be achieved by a series of well-defined manganese complexes which was not possible before. Furthermore, we elucidate the potential of our Mn-based catalysts in the field of hydrofunctionalization reactions for carbon-carbon multiple bonds. Our investigations unveiled novel insights into reaction pathways of dehydrogenative silylation of alkenes and trans-1,2-diboration of terminal alkynes, which was not yet reported for transition metals. Due to rational catalyst design, these transformations can be achieved under mild reaction conditions. Delightfully, all of the employed complexes are bench-stable compounds. We took advantage of the fact that Mn(I) alkyl complexes are known to undergo migratory insertion of the alkyl group into the CO ligand, yielding an unsaturated acyl intermediate. Hydrogen atom abstraction by the acyl ligand then paves the way to an active species for a variety of catalytic transformations which all proceed via an inner-sphere process. Although these textbook reactions have been well-known for decades, the application in catalytic transformations is still in its infancy. A brief historical overview of alkylated manganese(I)-carbonyl complexes is provided, covering the synthesis and especially iconic stoichiometric transformations, e.g., carbonylation, as intensively examined by Calderazzo, Moss, and others. An outline of potential future applications of defined alkyl manganese complexes will be given, which may inspire researchers for the development of novel (base-)metal catalysts.

Electrochemical hydroboration of carbonyl compounds

A green and sustainable electrochemical hydroboration of carbonyl compounds with HBpin has been reported for the first time. Under catalyst-free and additive-free mild reaction conditions the corresponding boronic esters were obtained in excellent yields via the simple electrochemical hydroboration of various aldehydes and ketones with HBpin at room temperature. The scale-up reaction demonstrated potential practical applications. A plausible reaction mechanism was proposed based on the corresponding deuterium-labelling, radical inhibition and cyclic voltammetry experiments.

Well-Defined Phosphine-Free Manganese(II)-Complex-Catalyzed Synthesis of Quinolines, Pyrroles, and Pyridines

Herein, we report a simple, phosphine-free, and inexpensive catalytic system based on a manganese(II) complex for synthesizing different important N-heterocycles such as quinolines, pyrroles, and pyridines from amino alcohols and ketones. Several control experiments, kinetic studies, and DFT calculations were carried out to support the plausible reaction mechanism. We also detected two potential intermediates in the catalytic cycle using ESI-MS analysis. Based on these studies, a metal-ligand cooperative mechanism was proposed.

Diplumbane-catalysed solvent- and additive-free hydroboration of ketones and aldehydes

A new diplumbane, namely [Pb(CH2SiMe3)3]2, was synthesized and structurally characterized. This group 14 element compound was found to catalyse the hydroboration of ketones and aldehydes under mild conditions without the use of additives and solvents, leading to the synthesis of a range of alcohols in high yields after hydrolysis.

Manganese-Catalyzed Asymmetric Formal Hydroamination of Allylic Alcohols: A Remarkable Macrocyclic Ligand Effect

A unique family of chiral peraza N₆ -macrocyclic ligands, which are conformationally rigid and have a tunable saddle-shaped cavity, is described. Utilizing their manganese(I) complexes, the first example of earth-abundant transition metal-catalyzed asymmetric formal anti-Markovnikov hydroamination of allylic alcohols was realized, providing a practical access to synthetically important chiral γ-amino alcohols in excellent yields and enantioselectivities (up to 99 % yield and 98 % ee). The single-crystal structure of a Mn^I complex indicates that the manganese atom coordinates with the chiral dialkylamine moiety in a bidentate fashion. Further DFT calculations revealed that five of the six nitrogen atoms in the ligand were engaged in multiple noncovalent interactions with Mn, an isopropanol molecule, and a β-amino ketone intermediate via coordination, hydrogen bonding, and/or CH⋅⋅⋅π interactions in the transition state, showing a remarkable role of the macrocyclic framework.

Manganese-catalyzed hydrogenation, dehydrogenation, and hydroelementation reactions

The emerging field of organometallic catalysis has shifted towards research on Earth-abundant transition metals due to their ready availability, economic advantage, and novel properties. In this case, manganese, the third most abundant transition-metal in the Earth's crust, has emerged as one of the leading competitors. Accordingly, a large number of molecularly-defined Mn-complexes has been synthesized and employed for hydrogenation, dehydrogenation, and hydroelementation reactions. In this regard, catalyst design is based on three pillars, namely, metal-ligand bifunctionality, ligand hemilability, and redox activity. Indeed, the developed catalysts not only differ in the number of chelating atoms they possess but also their working principles, thereby leading to different turnover numbers for product molecules. Hence, the critical assessment of molecularly defined manganese catalysts in terms of chelating atoms, reaction conditions, mechanistic pathway, and product turnover number is significant. Herein, we analyze manganese complexes for their catalytic activity, versatility to allow multiple transformations and their routes to convert substrates to target molecules. This article will also be helpful to get significant insight into ligand design, thereby aiding catalysis design.

Assembly of a 3D Cobalt(II) Supramolecular Framework and Its Applications in Hydrofunctionalization of Ketones and Aldehydes

A ditopic nitrogen ligand (E)-N′-(pyridin-4-ylmethylene)isonicotinohydrazide (L) containing both divergent pyridyl coordination sites and a hydrogen-bonding hydrazide–hydrazone moiety was synthesized. The Co(NCS)2-mediated self-assembly of L has resulted in the synthesis of a novel 3-dimensional (3D) supramolecular framework (1) that features both coordination and hydrogen bonding interactions. X-ray structural analysis reveals the formation and coordination mode of 1 in the solid state. The rational utilization of coordination bonds and hydrogen bonding interactions is confirmed and responsible for constructing the 3D materials. Catalytic studies using 1 in the presence of an activator are performed for the hydroboration and hydrosilylation reactions of ketones and aldehydes, and the results are compared with previously reported cobalt-based polymeric catalysts.

Palladium-catalyzed hydroboration reaction of unactivated alkynes with bis (pinacolato) diboron in water

A highly efficient and mild palladium-catalyzed hydroboration of unactivated internal alkynes in water is described. Both aryl- and alkyl-substituted alkynes proceeded smoothly within the reaction time to afford the desired vinylboronates in moderate to high yields. Bis (pinacolato) diboron was used to afford α- and β-hydroborated products in the presence of HOAc. These reactions showed high reactivities and tolerance, thus providing a promising method for the synthesis of alkenyl boron compounds.

Hexamethyldisilazane Lithium (LiHMDS)-Promoted Hydroboration of Alkynes and Alkenes with Pinacolborane

Lithium-promoted hydroboration of alkynes and alkenes using commercially available hexamethyldisilazane lithium as a precatalyst and HBpin as a hydride source has been developed. This method will be appealing for organic synthesis because of its remarkable substrate tolerance and good yields. Mechanistic studies revealed that the hydroboration proceeds through the in situ-formed BH₃ species, which acts to drive the turnover of the hydroboration of alkynes and alkenes.

The Rise of Manganese-Catalyzed Reduction Reactions

Recent developments in manganese-catalyzed reducing transformations—hydrosilylation, hydroboration, hydrogenation, and transfer hydrogenation—are reviewed herein. Over the past half a decade (i.e., 2016 to the present), more than 115 research publications have been reported in these fields. Novel organometallic compounds and new reduction transformations have been discovered and further developed. Significant challenges that had historically acted as barriers for the use of manganese catalysts in reduction reactions are slowly being broken down. This review will hopefully assist in developing this research area, by presenting a clear and concise overview of the catalyst structures and substrate transformations published so far.

1 Introduction

2 Hydrosilylation

3 Hydroboration

4 Hydrogenation

5 Transfer Hydrogenation

6 Conclusion and Perspective

Rh-Catalyzed Coupling of Aldehydes with Allylboronates Enables Facile Access to Ketones

We present herein a novel strategy for the preparation of ketones from aldehydes and allylic boronicesters. This reaction involves the allylation of aldehydes with allylic boronicesters and the Rh-catalyzed chain-walking of homoallylic alcohols. The key to this successful development is the protodeboronation of alkenyl borylether intermediate via a tetravalent borate anion species in the presence of KHF 2 and MeOH. This approach features mild reaction conditions, broad substrate scope, and excellent functional group tolerance. Mechanistic studies also supported that the tandem allylation and chain-walking process was involved.

First-Row d-Block Element-Catalyzed Carbon-Boron Bond Formation and Related Processes

Organoboron reagents represent a unique class of compounds because of their utility in modern synthetic organic chemistry, often affording unprecedented reactivity. The transformation of the carbon-boron bond into a carbon-X (X = C, N, and O) bond in a stereocontrolled fashion has become invaluable in medicinal chemistry, agrochemistry, and natural products chemistry as well as materials science. Over the past decade, first-row d-block transition metals have become increasingly widely used as catalysts for the formation of a carbon-boron bond, a transformation traditionally catalyzed by expensive precious metals. This recent focus on alternative transition metals has enabled growth in fundamental methods in organoboron chemistry. This review surveys the current state-of-the-art in the use of first-row d-block element-based catalysts for the formation of carbon-boron bonds.

Hydroboration of Terminal Alkenes and trans-1,2-Diboration of Terminal Alkynes Catalyzed by a Manganese(I) Alkyl Complex

A Mn^I‐catalyzed hydroboration of terminal alkenes and a 1,2‐diboration of terminal alkynes with pinacolborane (HBPin) is described. For alkenes, anti‐Markovnikov hydroboration takes place; for alkynes the reaction proceeds with excellent trans‐1,2‐selectivity. The most active pre‐catalyst is bench‐stable alkyl bisphosphine Mn^I complex fac‐[Mn(dippe)(CO)₃(CH₂CH₂CH₃)]. The catalytic process is initiated by migratory insertion of a CO ligand into the Mn–alkyl bond to yield an acyl intermediate, which undergoes B−H bond cleavage of HBPin (for alkenes) and rapid C−H bond cleavage (for alkynes), forming the active Mn^I boryl and acetylide catalysts [Mn(dippe)(CO)₂(BPin)] and [Mn(dippe)(CO)₂(C≡CR)], respectively. A broad variety of aromatic and aliphatic alkenes and alkynes was efficiently and selectively borylated. Mechanistic insights are provided based on experimental data and DFT calculations revealing that an acceptorless reaction is operating involving dihydrogen release.

Hydroboration of Terminal Alkenes and trans-1,2-Diboration of Terminal Alkynes Catalyzed by a Manganese(I) Alkyl Complex

A MnI-catalyzed hydroboration of terminal alkenes and a 1,2-diboration of terminal alkynes with pinacolborane (HBPin) is described. For alkenes, anti-Markovnikov hydroboration takes place; for alkynes the reaction proceeds with excellent trans-1,2-selectivity. The most active pre-catalyst is bench-stable alkyl bisphosphine MnI complex fac-[Mn(dippe)(CO)3(CH2CH2CH3)]. The catalytic process is initiated by migratory insertion of a CO ligand into the Mn-alkyl bond to yield an acyl intermediate, which undergoes B-H bond cleavage of HBPin (for alkenes) and rapid C-H bond cleavage (for alkynes), forming the active MnI boryl and acetylide catalysts [Mn(dippe)(CO)2(BPin)] and [Mn(dippe)(CO)2(C≡CR)], respectively. A broad variety of aromatic and aliphatic alkenes and alkynes was efficiently and selectively borylated. Mechanistic insights are provided based on experimental data and DFT calculations revealing that an acceptorless reaction is operating involving dihydrogen release.

Manganese-Catalyzed Hydroborations with Broad Scope

Reductive transformations of easily available oxidized matter are at the heart of synthetic manipulation and chemical valorization. The applications of catalytic hydrofunctionalization benefit from the use of liquid reducing agents and operationally facile setups. Metal‐catalyzed hydroborations provide a highly prolific platform for reductive valorizations of stable C=X electrophiles. Here, we report an especially facile, broad‐scope reduction of various functions including carbonyls, carboxylates, pyridines, carbodiimides, and carbonates under very mild conditions with the inexpensive pre‐catalyst Mn(hmds)₂. The reaction could be successfully applied to depolymerizations.

Recent developments in highly basic N-heterocyclic iminato ligands in actinide chemistry

In the last decade, major conceptual advances in the chemistry of actinide molecules and materials have been made to demonstrate their distinct reactivity profiles as compared to lanthanide and transition metal compounds, but some difficult questions remain concerning the intriguing stability of low-valent actinide complexes, and the importance of the 5f-orbitals in reactivity and bonding. The imidazolin-2-iminato moiety has been extensively used in ligands for the advancement of actinide chemistry owing to its unique capability of stabilizing the reactive and highly electrophilic metal ions by virtue of its strong electron donation and steric tunability. The current review article describes recent developments in the chemistry of light actinide metal ions (thorium and uranium) bearing these N-heterocyclic iminato moieties as supporting ligands. In addition, the effect of ring expansion of the N-heterocycle on the catalytic aptitude of the organoactinides is also described herein. The synthesis and reactivity of actinide complexes bearing N-heterocyclic iminato ligands are presented, and promising apposite applications are also presented. The current review focuses on addressing the catalytic behavior of actinide complexes with oxygen-containing substrates such as in the Tishchenko reaction, hydroelementation processes, and polymerization reactions. Actinide complexes have also found new catalytic applications, as demonstrated by the potent chemoselective carbonyl hydroboration and tandem proton-transfer esterification (TPTE) reaction, featuring coupling between an aldehyde and alcohol.

Rhodium-terpyridine Catalyzed Transfer Hydrogenation of Aromatic Nitro Compounds in Water

A rhodium terpyridine complex catalyzed transfer hydrogenation of nitroarenes to anilines with i-PrOH as hydrogen source and water as solvent has been developed. The catalytic system can work at a substrate/catalyst (S/C) ratio of 2000, with a turnover frequency (TOF) up to 3360 h^-1 , which represents one of the most active catalytic transfer hydrogenation systems for nitroarene reduction. The catalytic system is operationally simple and the protocol could be scaled up to 20 gram scale. The water-soluble catalyst bearing a carboxyl group could be recycled 15 times without significant loss of activity.

Neptunium(V) Isothiocyanate Complexes with 4'-Aryl-Substituted 2,2':6',2″-Terpyridines and N,N-Dimethylacetamide as Molecular Ligands

New complexes of neptunyl(V) isothiocyanate with 4'-aryl-substituted 2,2':6',2″-terpyridines (Terpy) and N,N-dimethylacetamide (DMA) were obtained: [(NpO₂)(4'-Ph-Terpy)(DMA)(NCS)]·DMA, [(NpO₂)(4'-(4-(CF₃)C₆H₄)-Terpy)(DMA)(NCS)]·2H₂O·DMA, [(NpO₂)(4'-(3-BrC₆H₄)-Terpy)(DMA)(NCS)]·DMA, and [(NpO₂)(4'-(2-(COOH)C₆H₄)-Terpy)(DMA)(NCS)]·DMA. The structures of the compounds were determined with X-ray diffraction analysis. The neptunium coordination polyhedra were found to be pentagonal bipyramids with O atoms of the NpO₂ groups in the apical positions and the equatorial planes formed by three N atoms of the terpyridine ligand, a N atom of the isothiocyanate anion, and an O atom of DMA. The influence of the substituents of the Ar group on the crystal structure is discussed. The IR spectra contain well-resolved bands of characteristic vibrations of all groups in the complex. The electronic absorption spectra are typical for neptunium(V) complexes and contain an intense narrow absorption band belonging to an f-f transition with a maximum of 988 nm and several long-wave satellites of lower intensity. The substituted terpyridines were shown to be efficient for the extraction of various valence forms of neptunium from the isothiocyanate solutions.

Manganese-Catalyzed Hydroboration of Terminal Olefins and Metal-Dependent Selectivity in Internal Olefin Isomerization-Hydroboration

In the past decade, the use of earth-abundant metals in homogeneous catalysis has flourished. In particular, metals such as cobalt and iron have been used extensively in reductive transformations including hydrogenation, hydroboration, and hydrosilylation. Manganese, on the other hand, has been considerably less explored in these reductive transformations. Here, we report a well-defined manganese complex, [Mn(^iPrBDI)(OTf)₂] (2a; BDI = bipyridinediimine), that is an active precatalyst in the hydroboration of a variety of electronically differentiated alkenes (>20 examples). The hydroboration is specifically selective for terminal alkenes and occurs with exclusive anti-Markovnikov selectivity. In contrast, when using the analogous cobalt complex [Co(^iPrBDI)(OTf)₂] (3a), internal alkenes are hydroborated efficiently, where a sequence of isomerization steps ultimately leads to their hydroboration. The contrasting terminal versus internal alkene selectivity for manganese and cobalt was investigated computationally and is further discussed in the herein-reported study.

CeO2–nanocubes as efficient and selective catalysts for the hydroboration of carbonyl groups

An efficient and reusable CeO2 nanocatalyst has been developed for the selective hydroboration of carbonyl compounds, including aromatic, heteroaromatic, aliphatic, and (hetero)aliphatic aldehydes and ketones.

Synthesis and crystal structures of two new lead(II) complexes with the pincer-type ligand 4′-(4-chlorophenyl)-2,2′:6′,2″-terpyridine (Cl-Ph-tpy): subtle interplay of weak intermolecular interactions

A dinuclear and a tetranuclear complex of lead(II) with the pincer-type ligand 4′-(4-chlorophenyl)-2,2′:6′,2″-terpyridine (Cl-Ph-tpy), [Pb2(Cl-Ph-tpy)2(μ-I)2I2] (1) and [Pb4(Cl-Ph-tpy)4(μ-Br)4(μ-OH2)Br4]·2CH3OH (2), have been synthesized and characterized by elemental analysis, FT-IR and 1H NMR spectroscopy, and by single-crystal X-ray diffraction. In the binuclear structure of 1, the Pb atom has a hemidirected PbN3I3 environment with a Pb(μ-I)2Pb central unit. In the tetranuclear structure of 2, two crystallographically independent Pb(II) centres having hemidirected PbN3Br3 and PbN3OBr2 environments are connected to Pb(μ-Br)Pb(μ-Br)2(μ-OH2)Pb(μ-Br)Pb chains. The supramolecular features in 1 and 2 are supported through weak but directional C–H···Cl, C–H···I and C–H···Br, C–H···O, O–H···Br, and O···Br interactions and aromatic π-π stacking.

Low-Valence Anionic α-Diimine Iron Complexes: Synthesis, Characterization, and Catalytic Hydroboration Studies

The synthesis of rare anionic heteroleptic and homoleptic α-diimine iron complexes is described. Heteroleptic BIAN (bis(aryl)iminoacenaphthene) complexes 1-[K([18]c-6)(thf)_0.5] and 2-[K([18]c-6)(thf)₂] were synthesized by reduction of the [(BIAN)FeBr₂] precursor complex using stoichiometric amounts of potassium graphite in the presence of the corresponding olefin. The electronic structure of these paramagnetic species was investigated by numerous spectroscopic analyses (NMR, EPR, ⁵⁷Fe Mössbauer, UV-vis), magnetic measurements (Evans NMR method, SQUID), and theoretical techniques (DFT, CASSCF). Whereas anion 1 is a low-spin complex, anion 2 consists of an intermediate-spin Fe(III) center. Both complexes are efficient precatalysts for the hydroboration of carbonyl compounds under mild reaction conditions. The reaction of bis(anthracene) ferrate(1-) gave the homoleptic BIAN complex 3-[K([18]c-6)(thf)], which is less catalytically active. The electronic structure was elucidated with the same techniques as described for complexes 1-[K([18]c-6)(thf)_0.5] and 2-[K([18]c-6)(thf)₂] and revealed an Fe(II) species in a quartet ground state.