Block Copolymer Capsules with Structure‐Dependent Release Behavior

Core-shell particle formation via Co-assembly of AB diblock copolymers and nanoparticles in 3D soft confinement

Core-shell particle formation via co-assembly of AB diblock copolymers and nanoparticles in 3D soft confinement was studied using a simulated annealing method. Several sequences of soft confinement-induced core-shell particles were predicted as functions of the volume fraction of the nanoparticle to core-shell particles, the incompatibility between blocks, the volume fractions of A-blocks, the chain length of AB diblocks, the eccentricity of the nanoparticle, and the initial concentration of copolymers. Simulation results demonstrate that those factors are able to tune the morphology of the core-shell particles precisely. Calculated data indicate that the copolymer chain was located between a hard confinement wall composed of the nanoparticle and a soft confinement wall composed of solvents, and the arrangement direction of the copolymer chains was in a competitive equilibrium between the two. We anticipate that this work will be helpful and instructive for the preparation of polymer shells with different structures and shapes, as well as the study of self-assembly morphology of copolymers in a complex confinement systems.

Shell with Striped, Helical, and Bipolar Lamellae Structures from Soft Confinement-Induced Self-Assembly of AB Diblock Copolymers on a Nanocylinder

The soft confinement-induced self-assembly of AB diblock copolymers on a nanocylinder is studied via a simulated annealing method. The formation of multiple copolymer shells was predicted by varying the interfacial interaction, the size of confinement, and the height and diameter of the nanocylinder. The competition between solvent repulsion and nanocylinder attraction determined the degree of encapsulation of the copolymer shell. The formation of a helical copolymer shell was induced by the maximization of conformational entropy. The preferential distribution position of copolymers on anisotropic nanocylinder surfaces was induced by interfacial energy minimization. Our study contributes to the understanding of the formation mechanism of the helical structure in block copolymer aggregates and the fabrication of copolymer shells with predesigned morphologies.

Functional polymeric molecules for performing autonomous synthesis of particles with core-shell structures and customizable shapes

Self-organization by the directed migration of components within a system is an important process in many applications, such as the unidirectional migration of motor proteins for transporting items to specific sites in a cell. This manuscript describes a class of functional polymeric molecules that have a set of instructions written by specific chemical moieties. These instructions allow the functional polymeric molecules to be used for autonomous synthesis of particles: particles with both functional core-shell structure and customizable shapes are fabricated for the first time. The functional polymeric molecules direct the large-scale migration of the liquid molecules to specific sites for forming the required customized structure of the particle, thus overcoming previous challenges of fabricating this class of particles. This first synthesis of this class of particles enables the development of novel applications: the concept of shape specificity for targeting sites. Both the basic structural properties (core-shell structure and customizable shape) are used in the specific applications of targeted drug delivery and imaging. The secure physical fit due to the complementary shapes enables the particles to remain locked in position for the targeting. Polymeric molecules are first shown to be highly capable of being encoded with instructions for autonomous synthesis of structured materials.

Dynamic Photonic Janus Colloids with Axially Stacked Structural Layers

Diblock copolymer (dBCP) particles capable of dynamic shape and color changes have gained significant attention due to their versatility in programmable shapes and intricate nanostructures. However, their application in photonic systems remains limited due to challenges in achieving a sufficient number of defect-free photonic layers over a tens-of-micrometer scale. In this study, we present a pioneering demonstration of photonic dBCP particles featuring over 300 axially stacked photonic layers with responsive color- and shape-transforming capabilities. Our approach leverages the complex interplay between the macrophase separation of multiple incompatible components and the microphase separation of dBCP from solvent-evaporative microemulsions. Specifically, continuous phase separation of silicone oil from polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP), triggered by solvent evaporation, promotes the anisotropic growth of PS-b-P2VP layers. This results in the formation of Janus colloids, where an oil droplet merges with a nanostructured polymer cone and lamellar structures align along the long axis of the cone. We highlight the capability to precisely adjust the particle morphology and the corresponding orientation, dispersion, and structural color window by modulating both the molecular weight of PS-b-P2VP and the volume ratio between PS-b-P2VP and silicone oil. Furthermore, reversible swelling/deswelling of photonic colloids is visualized and correlated with their structural colors. Finally, we demonstrate the potential of this study by presenting a multicolor-patterned array of photonic colloids, highlighting the possibilities for applications in smart photonic ink and devices.

Nanosheet Particles with Defect-Free Block Copolymer Structures Driven by Emulsions Containing Crystallizable Surfactants

Highly anisotropic-shaped particles with well-ordered internal nanostructures have received significant attention due to their unique shape-dependent photonic, rheological, and electronic properties and packing structures. In this work, nanosheet particles with cylindrical block copolymer (BCP) arrays are achieved by utilizing collapsed emulsions as a scaffold for BCP self-assembly. Highly elongated structures with large surface areas are formed by employing crystallizable surfactants that significantly reduce the interfacial tension of BCP emulsions. Subsequently, the stabilized elongated emulsion structures lead to the formation of BCP nanosheets. Specifically, when polystyrene-block-polydimethylsiloxane (PS-b-PDMS) and 1-octadecanol (C18-OH) are co-assembled within an emulsion, C18-OH penetrates the surfactant layer at the emulsion interface, lowering the interfacial tension (i.e., below 1 mN m-1 ) and causing emulsion deformation. In addition, C18-OH crystallization allows for kinetic arrest of the collapsed emulsion shape during solvent evaporation. Consequently, PS-b-PDMS BCPs self-assemble into defect-free structures within nanosheet particles, exhibiting an exceptionally high aspect ratio of over 50. The particle formation mechanism is further investigated by controlling the alkyl chain length of the fatty alcohol. Finally, the coating behavior of nanosheet particles is investigated, revealing that the deposition pattern on a substrate is strongly influenced by the particle's shape anisotropy, thus highlighting their potential for advanced coating applications.

Helical insertion of polyphenylene chains into confined cylindrical slits composed of two carbon nanotubes

The helical insertion behavior of poly(para-phenylene) (PP) chains into confined cylindrical slits constructed by two carbon nanotubes (CNTs) with different diameters is studied by molecular dynamics simulations. The contribution of system energy and each energy component to helical self-assembly is discussed to further explain the conditions, driving force and mechanism. The width and length of the slit, the diameter of the outer tube and the temperature have a great impact on the helical insertion of PP chains. Two equations are proposed to confirm the diameter and the distances between the PP helix and the inner and outer walls of the given CNTs. The helical self-assembly of PP with different numbers of chains inserted into the slits is further studied. This study has a great benefit in understanding the conformational behavior of polymers, even biological macromolecules in confinements.

Light-adjusted supramolecular host-guest interfacial recognition for reconfiguring soft colloidal aggregates

The soft interfacial template-assisted confined self-assembly of block copolymers (BCPs) guiding colloidal aggregates has been extensively investigated by interfacial instability. Whether the macromolecular polymer architectonics possessed stimulus-responsive self-regulated structural controllability more readily implement the morphological diversity of colloidal aggregates. Herein, we in-situ constructed the alginate-modified β-cyclodextrin/azobenzene-functionalized alkyl chains (Alg-β-CD/AzoC12) system by supramolecular host-guest interfacial recognition-engineered strategy, in which possessed photo-stimulated responsive structural reconfigurability by modulating assembly/disassembly behaviors between CD and Azo at oil/water interface. The host-guest droplet interfaces acted as soft templates managing interfacial instability by synergistically integrating supra-amphiphilic host-guest polymers with cosurfactants, further constructing various soft supracolloidal aggregates, including soft nanoaggregates, microspheres with tunable degrees of surface roughness. Additionally, the stimuli-altering structural reconfigurability of supramolecular host-guest polymers was regulated by ultraviolet/visible irradiation, endowing soft aggregates with structural diversity. It's highly anticipated that the supramolecular host-guest interfacial recognition self-assembly establishes great bridge between supramolecular host-guest chemistry and colloid interface science.

Study of the phase-transition behavior of (AB)3 type star polystyrene-block-poly(n-butylacrylate) copolymers by the combination of rheology and SAXS

A series of three-armed star polystyrene-block-poly(n-butylacrylate) copolymers (PS-b-PBA)3 were synthesized to study the phase-transition behavior of the copolymers. The order-to-disorder transition temperature has been determined by oscillatory at different temperatures and dynamic temperature sweep at a fixed frequency. Moreover, the micro-phase separation in the block copolymers has been evaluated by time–temperature superposition, while the free volume and the active energy of the copolymers have been calculated. Interestingly, active energy decreased with the increase in the molecular weight of the PBA components. To further determine the order-to-disorder transition temperature precisely, small angle X-ray scattering was performed at different temperatures. These results confirm that the chain mobility of the star-shaped copolymers is strongly dependent on the arm molecular weight of the star polymers, which will be beneficial for the processing and material preparation of the block copolymers.

Confined Self-Assembly of Block Copolymers within Emulsion Droplets: A Perspective

When the self-assembly of block copolymers (BCPs) occurs within organic emulsion droplets in the aqueous phase, the strong structural frustration of BCP chains causes the formation of a series of well-regulated BCP particles that cannot be obtained from the self-assembly of BCPs in the bulk state or solution. In this Perspective, we review the recent progress of the self-assembly of BCPs confined in emulsion droplets. The governing factors of the structure and morphology of the as-prepared BCP particles are summarized. In addition, the applications of the as-prepared BCP particles in photonic crystals and drug release are discussed. Finally, we also give a forward-looking perspective on future challenges in this field.

Update of ultrasound-assembling fabrication and biomedical applications for heterogeneous polymer composites

As a power-driving approach, ultrasound irradiation is very appealing to the preparation or modification of new materials. In the review, we overviewed the latest development of ultrasound-mediated effects or reactions in polymer composites, and demonstrated its unique and powerful aspects on the polymerization or aggregation. The review generalized the different categories of heterogeneous polymer composites by defining the constituents, and described the shapes, sizes and basic properties of various purpose-specific or site-specific products. Importantly, the review paid more attention to the main biomedicine applications of heterogeneous polymer composites, such as drug or bioactive substance entrapment, delivery, release, imaging, and therapy, and emphasized many advantages of ultrasound-assembling approaches and heterogeneous polymer composites in biology and medicine fields. In addition, the review also indicated the prospective challenges of heterogeneous polymer composites both in ultrasound-assembling designs and in biomedical applications.

Light-driven sequential shape transformation of block copolymer particles through three-dimensional confined self-assembly

Shape-controlled block copolymer (BCP) particles that respond to light stimulus have drawn great attention due to their promising applications in smart materials, yet polymeric particles with light-triggered controllable sequential shape transformation (SST) are still rarely reported. By confined co-assembly of polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) and azo-containing light-responsive additives within emulsions, herein, we fabricated BCP particles with light-controlled SST behavior. Attributed to the quaternization of P2VP chains with bromoalkyl additives and the trans-cis isomerization of an azo group under UV light, the interfacial interactions between the BCPs and the surrounding aqueous phase are significantly varied; therefore, the particles exhibit three distinct phases in sequence: (1) elongation of ellipsoidal particles with increasing domain spacing; (2) shape transformation of elongated ellipsoidal particles into accordion-like particles; and (3) disassembly of polymer particles into small spheres. In addition, these particles with SST behavior can be used in light-controlled drug release at a high spatial-temporal resolution, demonstrating their potential in clinical settings and biomedicine.

Shaping Block Copolymer Microparticles by Positively Charged Polymeric Nanoparticles

Shape-transforming block copolymer (BCP) microparticles have attracted extensive attention due to their promising applications in nanotechnology, biomedicines, interfacial science, and other fields. As their performance is highly associated to their shape and structure, it is highly important to realize the precise control of particle shape. In this report, we propose a method to regulate the shape and structure of polystyrene-b-polydimethoxysiloxane (PS-b-PDMS) microparticles by using positively charged core-crosslinked nanoparticles (CNPs) as a co-surfactant, combining with cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrostatic repulsive interactions between CNPs and CTAB dominate the shape of PS-b-PDMS particles. Upon introducing NaCl, the electrostatic repulsion is reduced, resulting in the reshape of PS-b-PDMS particles from striped Janus ellipsoids to onion-like microspheres at a critical concentration of NaCl (c_NaCl ). Interestingly, we find that the critical c_NaCl first increased then reached a plateau, as the increase in the crosslinking degree of the CNPs. Our work provides a simple strategy to tailor the morphology of BCPs by manipulating the electrostatic interaction. This article is protected by copyright. All rights reserved.

Ionic Transport and Robust Switching Properties of the Confined Self-Assembled Block Copolymer/Homopolymer in Asymmetric Nanochannels

The self-assembly of block copolymers in a confined space has been proven to be a facile and robust strategy for fabricating assembled structures with various potential applications. Herein, we employed a new pH-responsive polymer self-assembly method to regulate ion transport inside artificial nanochannels. The track-etched asymmetric nanochannels were functionalized with PS_22k-b-P4VP_17k/hPS_4k blend polymers, and the ionic conductance and rectification properties of the proposed system were investigated. The pH-actuated changes in the surface charge and wettability resulted in the selective pH-gated ionic transport behavior. The designed system showed a good switching property to the pH stimulus and could recover during the repetitive experiments. The gating ability of the polymer-nanochannel system increased with increasing the weight of the homopolymer, and the proposed platform demonstrated robust stability and reusability. Numerical and the dissipative particle dynamics simulations were implemented to emulate the pH-dependent self-assembling behavior of diblock copolymers in a confined space, which were consistent with the experimental observations. As an example of the self-assembly of polymers in nanoconfinements, this work provides a facile and robust strategy for the regulation of ion transport in synthetic nanochannels. Meanwhile, this work can be further extended to design artificial smart nanogates for various applications such as mass delivery and energy harvesting.

Mesoscale Simulations of Polymer Solution Self-Assembly: Selection of Model Parameters within an Implicit Solvent Approximation

Coarse-grained modeling is an outcome of scientific endeavors to address the broad spectrum of time and length scales encountered in polymer systems. However, providing a faithful structural and dynamic characterization/description is challenging for several reasons, particularly in the selection of appropriate model parameters. By using a hybrid particle- and field-based approach with a generalized energy functional expressed in terms of density fields, we explore model parameter spaces over a broad range and map the relation between parameter values with experimentally measurable quantities, such as single-chain scaling exponent, chain density, and interfacial and surface tension. The obtained parameter map allows us to successfully reproduce experimentally observed polymer solution assembly over a wide range of concentrations and solvent qualities. The approach is further applied to simulate structure and shape evolution in emulsified block copolymer droplets where concentration and domain shape change continuously during the process.

Ordered Mesoporous Microcapsules from Double Emulsion Confined Block Copolymer Self-Assembly

Polymeric microcapsules with shells containing homogeneous pores with uniform diameter on the nanometer scale are reported. The mesoporous microcapsules are obtained from confined self-assembly of amphiphilic block copolymers with a selective porogen in the shell of water-in-oil-in-water double emulsion drops. The use of double emulsion drops as a liquid template enables the formation of homogeneous capsules of 100s of microns in diameter, with aqueous cores encapsulated in a shell membrane with a tunable thickness of 100s of nanometers to 10s of microns. Microcapsules with shells that exhibit an ordered gyroidal morphology and three-dimensionally connected mesopores are obtained from the triblock terpolymer poly(isoprene)-block-poly(styrene)-block-poly(4-vinylpyridine) coassembled with pentadecylphenol as a porogen. The bicontinuous shell morphology yields nanoporous paths connecting the inside to the outside of the microcapsule after porogen removal; by contrast, one-dimensional hexagonally packed cylindrical pores, obtained from a traditional diblock copolymer system with parallel alignment to the surface, would block transport through the shell. To enable the mesoporous microcapsules to withstand harsh conditions, such as exposure to organic solvents, without rupture of the shell, we develop a cross-linking method of the nanostructured triblock terpolymer shell after its self-assembly. The microcapsules exhibit pH-responsive permeability to polymeric solutes, demonstrating their potential as a filtration medium for actively tunable macromolecular separation and purification. Furthermore, we report a tunable dual-phase separation method to fabricate microcapsules with hierarchically porous shells that exhibit ordered mesoporous membrane walls within sponge-like micron-sized macropores to further control shell permeability.

Shaping Block Copolymer Microparticles by pH-Responsive Core-Cross-Linked Polymeric Nanoparticles

Block copolymer microparticles with controllable morphology have drawn widespread attention owing to their promising applications in photonic materials, energy storage, and other areas. Hence, it is highly desired to achieve a controllable transformation of microparticle morphology. In this work, we report a simple method to shape the morphology of polystyrene-block-poly(dimethylsiloxane) (PS-b-PDMS) microparticles, by employing core-cross-linked polymeric nanoparticles (CNPs) as cosurfactants which are synthesized through cross-linking P4VP segment of PS-block-poly(4-vinylpyridine) (PS-b-P4VP). The addition of pH-responsive CNPs makes the shape of pH-inert PS-b-PDMS microparticles sensitive to pH value. The PS-b-PDMS microparticles transformed from elongated Janus pupa-like particles to onion-like particles by decreasing the pH value of the aqueous phase. The deformation mechanism is investigated by changing pH value, the weight fraction of CNPs, and surfactant property. This study provides a facile strategy to deform microparticles of pH-inert BCPs by tuning pH value, which is anticipated to be applicable to other non-pH-responsive BCP microparticles.

Transformable Colloidal Polymer Particles with Ordered Internal Structures

Based on studies combining experiments and simulations, internally ordered colloidal particles that are able to undergo morphological transformations both in shape and internal structure are presented. The particles are prepared by emulsion solvent evaporation-induced 3D soft confined assembly of di-block copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP). Control over the solvent selectivity leads to a dramatic change in shape and internal structure for particles. Pupa-like particles of lamellar morphology are obtained when using a non-selective solvent, while patchy particles possessing a plum pudding structure formed when the solvent is selective for PS-block. More interestingly, 3D soft confined annealing drives order-order morphological transformation of the particles. The morphology of reshaped particles can be well controlled by varying the solvent selectivity, annealing time, and interfacial interaction. The experimental results can be explained based on simulations. This study can offer considerable scope for the design of new stimuli-responsive colloidal particles for potential applications in photonic crystal, drug delivery and release, sensor and smart coating, etc.

Effect of Molecular Architecture and Composition on the Aggregation Pathways of POEGMA Random Copolymers in Water

Understanding of the temperature-induced phase transition of poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) random copolymers with varied composition remains largely incomplete. Upon heating they can form either macroscopically phase-separated aggregates or micelles. We examined the effect of polymer architecture by rationally designing and synthesizing various POEGMA copolymer structures via atom transfer radical polymerization using OEGMA monomers of different EO lengths. Micelle formation occurred for copolymers with a small fraction of long side chains counterbalanced by an appropriate number of short side chains, while macroscopic phase separation occurred for other copolymer compositions. In some copolymer compositions and architectures, micelle formation followed by macroscopic phase separation occurred, and the temperature of these phase transitions could be tailored accordingly. This new strategy allows the control over the microstructure and specific transition temperatures enabling, for instance, the preparation of nanocarriers for encapsulating hydrophobic compounds.

Responsive Photonic Crystal Microcapsules of Block Copolymers with Enhanced Monochromaticity

Self-assembly of block copolymers (BCPs) has been developed as a promising approach for constructing photonic crystal (PC) microspheres for dynamic optical modulation. However, high curvature in the center of microspheres usually distorts the periodic core structure, leading to an inconsistency of photonic bandgap and poor monochromaticity of structural color. Herein, we report a simple yet robust strategy for fabricating responsive PC microcapsules of polystyrene-b-poly(2-vinylpyridine) through self-emulsification strategy. Interestingly, the microcapsules exhibit bright structural color with significantly enhanced monochromaticity, compared to their solid counterpart, since the microcapsules have no irregular cores. The structural colors of the PC microcapsules not only exhibit a variability through binary mixing of BCPs but also show a responsiveness to pH value. As a colored microcarrier, the PC microcapsules show a potential for visualizing the pH-dependent release behavior of encapsulated hydrophilic cargos on account of pH-responsive structural color.

Polymer Brush-Induced Hollow Colloids via Diffusion-Controlled Silication

We report on a new strategy to synthesize asymmetrical hollow colloidal particles by exploiting limited chemical diffusion that occurs at the periphery of a solvated polymer brush on the particle surface. The polymer brush-in our case poly(glycidyl methacrylate)-bears hydroxyl groups upon hydrolysis and is partially cross-linked under the Stöber condition of silication. Desolvation of the polymers creates a cavity. While elucidating this new mechanism, we demonstrate that particles with various types of cavities and tunable properties can be synthesized, including the ones bearing hemispherical and crescent shapes, as well as particles with wrinkled surfaces. Furthermore, we show that the hollow particles adopt preferred orientations because of their shape and composition attributes, which is further explored to facilitate the confined synthesis of nanocrystals.

Self-Assembly of Linear Amphiphilic Pentablock Terpolymer PAAx-PS48-PEO46-PS48-PAAxin Dilute Aqueous Solution

A series of linear amphiphilic pentablock terpolymer PAA_x-b-PS₄₈-b-PEO₄₆-b-PS₄₈-b-PAA_x (A_xS₄₈O₄₆S₄₈A_x) with various lengths x of the PAA block (x = 15, 40, 60, and 90) were synthesized via a two-step atom transfer radical polymerization (ATRP) using Br-poly(ethylene oxide)-Br (Br-PEO₄₆-Br) as the macroinitiator, styrene (St) as the first monomer, and tert-butyl acrylate (tBA) as the second monomer, followed with the hydrolysis of PtBA blocks. The A_xS₄₈O₄₆S₄₈A_x pentablock terpolymers formed micelles in dilute aqueous solution, of which the morphologies were dependent on the length x of the PAA block. Cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), and zeta potential measurement were employed to investigate the morphologies, chain structures, size, and size distribution of the obtained micelles. The morphology of A_xS₄₈O₄₆S₄₈A_x micelles changed from spherical vesicles with ordered porous membranes to long double nanotubes, then to long nanotubes with inner modulated nanotubes or short nanotubes, and finally, to spherical micelles or large compound vesicles with spherical micelles inside when x increased from 15 to 90. The hydrophobic PS blocks formed the walls of vesicles and nanotubes as well as the core of spherical micelles. The hydrophilic PEO and PAA block chains were located on the surfaces of vesicle membranes, nanotubes, and spherical micelles. The PAA block chains were partially ionized, leading to the negative zeta potential of A_xS₄₈O₄₆S₄₈A_x micelles in dilute aqueous solutions.

Synthesis of Temperature/pH Dual-Stimuli-Response Multicompartmental Microcapsules via Pickering Emulsion for Preprogrammable Payload Release

Stimuli-responsive microcapsules, which can release the encapsulated payload under various environmental stimuli, have attracted great interests of the food, pharmaceutical, cosmetics, and agricultural fields in recent years. However, most reported responsive microcapsules normally have a single storage area and thus load/release only one type of payload under one stimulus. In this work, we fabricated a novel kind of multicompartmental intelligent microcapsule with two storage areas and independently controlled (preprogrammable) releasing behavior under different stimuli via rapid photopolymerization of Pickering emulsions. In our strategy, a temperature-sensitive polymeric (N-isopropyl acrylamide, pNIPAM) particle was prepared and loaded with Nile Red (NR), which was then employed as a Pickering emulsifier to stabilize oil-in-water droplets. The oil was composed of pH-responsive monomers and oil-soluble fluorescent green (OG). Upon exposure to photoirradiation, pH-responsive monomers were polymerized along the interior of the droplets and converted into microcapsules. With NR in the temperature-sensitive pNIPAM@NR particles and OG in the interior of the microcapsules, the as-prepared microcapsules possess dual-carrier capability with two payloads encapsulated dependently in two different compartments. In addition, the microcapsules could respond to two different external stimuli (temperature and pH) and realize the selective and independent release of encapsulated molecules (NR and OG) from the shell and core without any mutual interference. More importantly, the release of NR and OG can be programmed by preprogramming the order of the stimulus responses, which can be altered. Our work develops a simple and effective strategy to fabricate responsive multicompartment microcapsules with preprogrammable release of different molecules.

Synthesis of surface functionalized hollow microporous organic capsules for doxorubicin delivery to cancer cells

Functionalized hypercrosslinked hollow microporous capsules are demonstrated to have potential applications in targeted delivery of anticancer drugs.

In Situ Fabrication of Polymeric Microcapsules by Ink-Jet Printing of Emulsions

Phase separation driven by solvent evaporation of emulsions can be used to create polymeric microcapsules. The combination of emulsion solvent evaporation with ink-jet printing allows the rapid fabrication of polymeric microcapsules at a target location on a surface. The ink is an oil-in-water emulsion containing in the dispersed phase a shell-forming polymer, a core-forming fluid that is a poor solvent for the polymer, and a low-boiling good solvent. After the emulsion is printed onto the substrate, the good solvent evaporates by diffusion through the aqueous phase, and the polymer and the poor solvent phase separate to form microcapsules. The continuous aqueous phase contains polyvinyl alcohol that serves as an emulsifier and a binder of the capsules to the substrate. This method is demonstrated for microcapsules with various shell-forming polymers (polystyrene, poly(methylmethacrylate) and poly(l-lactide)) and core-forming poor solvents (hexadecane and a 4-heptanone/sunflower oil mixture). Cargoes such as fluorescent dyes (Nile Red and tetracyanoquinodimethane) or active ingredients (e.g., the fungicide tebuconazole) can be encapsulated. Uniform microcapsules are obtained by printing emulsions containing monodisperse oil droplets produced in a microfluidic device. We discuss the physical parameters that need to be controlled for the successful fabrication of microcapsules in inkjet printing. The method for rapid, in situ encapsulation could be useful for controlled-release applications such as in agrochemical sprays, fragrances, functional coatings, and topical medicines.

Well-Ordered Inorganic Nanoparticle Arrays Directed by Block Copolymer Nanosheets

Precise control over the spatial arrangement of inorganic nanoparticles on a large scale is desirable for the design of functional nanomaterials, sensing, and optical/electronic devices. Although great progress has been recently made in controlling the organization of nanoparticles, there still remains a grand challenge to arrange nanoparticles into highly-ordered arrays over multiple length scales. Here, we report the directed arrangement of inorganic nanoparticles into arrayed structures with long-range order, up to tens of microns, by using hexagonally-packed cylindrical patterns of block copolymer nanosheets self-assembled within collapsed emulsion droplets as scaffolds. This technique can be used to generate nanoparticle arrays with various nanoparticle arrangements, including hexagonal honeycomb structures, periodic nanoring structures, and their combinations. This finding provides an effective route to fabricate diverse nanoparticle arrayed structures for the design of functional materials and devices.

Shape-Anisotropic Diblock Copolymer Particles with Varied Internal Structures

Anisotropic polymer particles have promising applications in various fields, whereas their preparation usually suffers from tedious procedures. Here, we introduce a facile strategy to fabricate novel shape-anisotropic particles with varied internal structures via self-assembly of block copolymers (BCPs), with perfluorooctane (PFO) as the liquid template in emulsion droplets. By increasing the volume ratio of PFO to polystyrene- block-poly(4-vinylpyridine) (PS- b-P4VP) or decreasing the initial concentration of the BCPs, the self-assembled polymer particles change from spherical core-shell structures to anisotropic particles. Moreover, the anisotropic shape and internal structure of the polymer particles, including cone-like particles with alternative PS and P4VP lamellas, crescent-shaped particles with cylindrical P4VP domains, and plate-like particles with spherical P4VP domains, can be obtained by changing the block ratio or molecular weight or by adding a hydrogen-bonding agent. Based on the in situ optical microscopy investigation of the morphology evolution of the emulsion droplet, we conclude that both kinetic and thermodynamic factors during emulsion evolution determine the formation of shape-anisotropic polymeric particles with controllable internal structures.

Recent advances in polymerizations in dispersed media

Advances in chemistry heterophase polymerizations reflect new developments in polymer chemistry. Although some few polymerization reactions cannot be performed in dispersed media, new polymerization reactions can still benefit from advantages of heterophase reactions, which are fast kinetics due to high local concentration of reagents and advantageous heat exchange. We describe here advances in heterophase polymerizations, with a focus on miniemulsion polymerization, which are mainly driven by academic interest for biomedicine and energy science. Click-reactions in dispersion are particularly interesting because they are bioorthogonals. Synthesis of highly crosslinked polymer colloids, especially with conjugated polymers, has found applications in gas storage, catalysis, and production of energy. Finally, we show how spatial segregation in heterophase polymerization can help to obtain polymer materials with unique structures.

Regulating Block Copolymer Assembly Structures in Emulsion Droplets through Metal Ion Coordination

In this report, we demonstrate the metal ion coordination-induced morphological transition of block copolymer assemblies under three-dimensional (3D) confinement. Polystyrene- block-poly(4-vinyl pyridine) (PS- b-P4VP) aggregates with various morphologies can be obtained by emulsion-solvent evaporation in the presence of metal ions (e.g., Pb(II) or Fe(III) ions) in the aqueous phase. Due to the coordination interaction between 4VP units and metal ions, the overall shape, internal structure, and surface composition of the particles can be tailored by varying the type and concentration of the metal ions. For example, when Pb(II) ions were employed, morphological transition of the assemblies occurred due to the formation of P4VP-Pb(II) complexes. More interestingly, when Fe(III) ions were added, hydrolysis of Fe(III) caused the reduction of the pH value of the aqueous phase, leading to the protonation of 4VP units. As a result, interfacial instability took place to trigger the splitting of emulsion droplets and then formation of nanosized micelles. Therefore, metal ion coordination is a facile strategy to tune the structure of assemblies under 3D confinement and offers an alternative approach for the design of organic-inorganic hybrid assemblies with well-tunable structures.

Synthesis of Redox-Responsive Core Cross-Linked Micelles Carrying Optically Active Helical Poly(phenyl isocyanide) Arms and Their Applications in Drug Delivery

In this manuscript, we designed and synthesized three core cross-linked micelles (M-5L, P-5L, and P-5D) with redox-responsive disulfide bonds in the core and carrying optically active helical polyisocyanide arms. Their arms were different in the helicity of the main chain and the chirality of the side groups. These micelles showed excellent redox-responsiveness to reducing agent. However, because of the different chiralities of the arms, the three micelles exhibited different performances in drug delivery and controlled release. The M-5L micelle carrying left-handed helical arms showed better therapeutic effect than the other two due to the rapid cell membrane permeability.

Confined co-assembly of AB/BC diblock copolymer blends under 3D soft confinement

Compared to synthesizing a new block copolymer, blending of two types of block copolymers or a block copolymer and a homopolymer is a simple yet effective approach to create new self-assembled nanostructures. Here, we apply Monte Carlo (MC) simulations to mimic the co-assembly of AB/BC diblock copolymer blends within a three-dimensional (3D) soft confined space, which corresponds to the co-assembly confined in an emulsion droplet in experiment. The confined co-assemblies of four types of block copolymer blends at different block ratios, i.e., A8B8/B8C8, A6B10/B10C6, A12B4/B4C12 and A12B4/B10C6, are investigated by MC simulations. The simulation results reveal that the ratio of different types of blocks and the polymer-solvent interactions between the different blocks and the solvent determine the final self-assembled nanostructures. By tailoring these two controlling parameters, we not only reproduced some classic nanostructures, i.e., pupa-, onion-, and bud-like particles, but also predicted some unconventional nanostructures, such as patch-, Janus-, peanut-, disc- and snowman-like particles via MC simulations.

Sonochemistry-Assembled Stimuli-Responsive Polymer Microcapsules for Drug Delivery

Stimuli-responsive polymer microcapsules (PMs) fabricated by the sonochemical method have emerged for developing useful drug delivery systems, and the latest developments are mainly focusing on the synthetic strategies and properties such as structure, size, stability, loading capacity, drug delivery, and release. There, the primary attribution of sonochemistry is to offer a simple and practical approach for the preparation of PMs. Structure, size, stability, and properties of PMs are designed mainly according to synthetic materials, implementation schemes, or specific demands. Numerous functionalities of PMs based on different stimuli are demonstrated: targeting motion in a magnetic field or adhering to the living cells with sensitive sites through molecular recognition, and stimuli-triggered release including enzymatic catalysis, chemical reaction as well as physical or mechanical process. The current review discusses the basic principles and mechanisms of stimuli effects, and describes the progress in the application such as targeted drug systems and controlled drug systems, and also gives an outlook on the future challenges and opportunities for drug delivery and theranostics.

Recent progress in the self-assembly of block copolymers confined in emulsion droplets

When the self-assembly of block copolymers (BCPs) occurs within a deformable emulsion droplet, BCPs can aggregate into a variety of nanoscaled particles with unique nanostructures and properties since the confinement effect can effectively break the symmetry of a structure.

Breathable Microgel Colloidosome: Gas-Switchable Microcapsules with O2 and CO2 Tunable Shell Permeability for Hierarchical Size-Selective Control Release

Microcapsules enabling precise delivery and controlled release are highly desirable. However, it is still challenging to control the release profile by regulating the microcapsule shell permeability. In this work, gas-switchable microgel colloidosome (MGC) with oxygen (O₂) and carbon dioxide (CO₂) dual gas-tunable shell permeability has been developed and tested for control release of water-soluble cargo molecules, based on the size exclusion mechanism. The O₂ and CO₂ dual gas-switchable poly(2-(diethylamino)ethyl methacrylate-co-2,3,4,5,6-pentafluorostyrene), P(DEA-co-FS), microgels having surface modified with amino group (-NH₂) were synthesized and used to stabilize oil-in-water (O/W) Pickering emulsions. The oil-soluble poly(propylene glycol) diglycidyl ether (PPGDGE) was added as an intermicrogel cross-linker. The cross-linking between adjacent microgel particles at the water-oil interface was achieved through the amine-epoxy reaction of PPGDGE with the amine groups at the particle surface. Fluorescent-labeled dextran model cargo molecules of 10 kDa (D₁) and 2000 kDa (D₂) were uploaded under CO₂ treatment and locked inside the MGC with N₂ treatment. The O₂ and CO₂ dual-gas switchable properties offered the MGC with tunable shell permeability, which allowed the hierarchical release of D₁ and D₂ based on size exclusive mechanism. This work provides a robust method for preparation of gas-switchable microcapsules with tunable permeability and size-exclusive hierarchical release profile, promising for multiple ingredient controllable release, separation, and reaction.