Surface Faceting and Reconstruction of Ceria Nanoparticles

Enhanced durability of Pd/CeO2-C via metal-support interaction for oxygen reduction reaction

It is a challenge to improve the long-term durability of Pd-based electrocatalysts for oxygen reduction reaction (ORR) in fuel cells. Herein, Pd/CeO2-C-T (T= 800 °C, 900 °C and 1000 °C) hybrid catalysts with metal-support interaction are prepared from Ce-based metal organic framework precursor. Abundant tiny CeO2nanoclusters are produced to form nanorod structures with uniformly distributed carbon through a calcination process. Meanwhile, both carbon and CeO2nanoclusters have good contact with the following deposited surfactant-free Pd nanoclusters. Benefited from the large specific surface area, good conductivity and structure integrity, Pd/CeO2-C-900 exhibits the best electrocatalytic ORR performance: onset potential of 0.968 V and half-wave potential of 0.857 V, outperforming those obtained on Pd/C counterpart. In addition, the half-wave potential only shifts 7 mV after 6000 cycles of accelerated durability testing, demonstrating robust durability.

Highly Active Oxidation Catalysts through Confining Pd Clusters on CeO2 Nano-Islands

CeO2-supported noble metal clusters are attractive catalytic materials for several applications. However, their atomic dispersion under oxidizing reaction conditions often leads to catalyst deactivation. In this study, the noble metal cluster formation threshold is rationally adjusted by using a mixed CeO2-Al2O3 support. The preferential location of Pd on CeO2 islands leads to a high local surface noble metal concentration and promotes the in situ formation of small Pd clusters at a rather low noble metal loading (0.5 wt %), which are shown to be the active species for CO conversion at low temperatures. As elucidated by complementary in situ/operando techniques, the spatial separation of CeO2 islands on Al2O3 confines the mobility of Pd, preventing the full redispersion or the formation of larger noble metal particles and maintaining a high CO oxidation activity at low temperatures. In a broader perspective, this approach to more efficiently use the noble metal can be transferred to further systems and reactions in heterogeneous catalysis.

Low-temperature redox activity and alcohol ammoxidation performance on Cu- and Ru-incorporated ceria catalysts

Transition-metal-incorporated cerium oxides with Cu and a small amount of Ru (Cu0.18Ru0.05CeOz) were prepared, and their low-temperature redox performance (<423 K) and catalytic alcohol ammoxidation performance were investigated. Temperature-programmed reduction/oxidation under H2/O2 and in situ X-ray absorption fine structure revealed the reversible redox behavior of the three metals, Cu, Ru, and Ce, in the low-temperature redox processes. The initially reduced Ru species decreased the reduction temperature of Cu oxides and promoted the activation of Ce species. Cu0.18Ru0.05CeOz selectively catalyzed the production of benzonitrile in the ammoxidation of benzyl alcohol. H2-treated Cu0.18Ru0.05CeOz showed a slightly larger initial conversion of benzyl alcohol than O2-treated Cu0.18Ru0.05CeOz, suggesting that the reduced structure of Cu0.18Ru0.05CeOz was active for the ammoxidation. The integration of both Cu and Ru resulted in the efficient promotion of ammoxidation, in which the Ru species were involved in the conversion of benzyl alcohol and Cu species were required for selective production of benzonitrile.

Structure and Chemical Reactivity of Y-Stabilized ZrO2 Surfaces: Importance for the Water-Gas Shift Reaction

The surface structure and chemical properties of Y-stabilized zirconia (YSZ) have been subjects of intense debate over the past three decades. However, a thorough understanding of chemical processes occurring at YSZ powders faces significant challenges due to the absence of reliable reference data acquired for well-controlled model systems. Here, we present results from polarization-resolved infrared reflection absorption spectroscopy (IRRAS) obtained for differently oriented, Y-doped ZrO2 single-crystal surfaces after exposure to CO and D2O. The IRRAS data reveal that the polar YSZ(100) surface undergoes reconstruction, characterized by an unusual, red-shifted CO band at 2132 cm-1. Density functional theory calculations allowed to relate this unexpected observation to under-coordinated Zr4+ cations in the vicinity of doping-induced O vacancies. This reconstruction leads to a strongly increased chemical reactivity and water spontaneously dissociates on YSZ(100). The latter, which is an important requirement for catalysing the water-gas-shift (WGS) reaction, is absent for YSZ(111), where only associative adsorption was observed. Together with a novel analysis Scheme these reference data allowed for an operando characterisation of YSZ powders using DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy). These findings facilitate rational design and tuning of YSZ-based powder materials for catalytic applications, in particular CO oxidation and the WGS reaction.

Composition-dependent morphologies of CeO2 nanoparticles in the presence of Co-adsorbed H2O and CO2: a density functional theory study

Catalytic activity is affected by surface morphology, and specific surfaces display greater activity than others. A key challenge is to define synthetic strategies to enhance the expression of more active surfaces and to maintain their stability during the lifespan of the catalyst. In this work, we outline an ab initio approach, based on density functional theory, to predict surface composition and particle morphology as a function of environmental conditions, and we apply this to CeO2 nanoparticles in the presence of co-adsorbed H2O and CO2 as an industrially relevant test case. We find that dissociative adsorption of both molecules is generally the most favourable, and that the presence of H2O can stabilise co-adsorbed CO2. We show that changes in adsorption strength with temperature and adsorbate partial pressure lead to significant changes in surface stability, and in particular that co-adsorption of H2O and CO2 stabilizes the {100} and {110} surfaces over the {111} surface. Based on the changes in surface free energy induced by the adsorbed species, we predict that cuboidal nanoparticles are favoured in the presence of co-adsorbed H2O and CO2, suggesting that cuboidal particles should experience a lower thermodynamic driving force to reconstruct and thus be more stable as catalysts for processes involving these species.

Selective Hydrogenation of Aldehydes under Syngas Using CeO2-Supported Au Nanoparticle Catalyst

Chemoselective hydrogenation of aldehydes to alcohols is of importance in synthetic chemistry. Here, we report a reusable CeO2-supported Au nanoparticle catalyst for the selective hydrogenation of aldehydes using syngas as the hydrogen source for which CO in syngas works as a site blocker to prevent side reactions. In particular, the hydrogenation of aldehydes with an easily reducible alkene, alkyne, or halogen moiety under syngas gave the corresponding alcohols with high selectivity, while the hydrogenation under pure hydrogen resulted in overreduction or dehalogenation. Of particular interest is that CO works as a site blocker but does not affect the hydrogenation rate significantly. A potential application of the present catalyst system was demonstrated by the conversion of terminal alkenes to alcohols via a one-pot hydroformylation/hydrogenation sequence.

Ordered hierarchical superlattice amplifies coated-CeO2 nanoparticles luminescence

Achieving a controlled preparation of nanoparticle superstructures with spatially periodic arrangement, also called superlattices, is one of the most intriguing and open questions in soft matter science. The interest in such regular superlattices originates from the potentialities in tailoring the physicochemical properties of the individual constituent nanoparticles, eventually leading to emerging behaviors and/or functionalities that are not exhibited by the initial building blocks. Despite progress, it is currently difficult to obtain such ordered structures; the influence of parameters, such as size, softness, interaction potentials, and entropy, are neither fully understood yet and not sufficiently studied for 3D systems. In this work, we describe the synthesis and characterization of spatially ordered hierarchical structures of coated cerium oxide nanoparticles in water suspension prepared by a bottom-up approach. Covering the CeO2 surface with amphiphilic molecules having chains of appropriate length makes it possible to form ordered structures in which the particles occupy well-defined positions. In the present case superlattice arrangement is accompanied by an improvement in photoluminescence (PL) efficiency, as an increase in PL intensity of the superlattice structure of up to 400 % compared with that of randomly dispersed nanoparticles was observed. To the best of our knowledge, this is one of the first works in the literature in which the coexistence of 3D structures in solution, such as face-centered cubic (FCC) and Frank-Kasper (FK) phases, of semiconductor nanoparticles have been related to their optical properties.

CeO2 nanorods supported CuOx-RuOx bimetallic catalysts for low temperature CO oxidation

Bimetallic catalysts often outperform monometallic catalysts due to changeable structural orientation, synergistic effects, and integration of two different metal or metal oxide properties. Here, a series of CeO2 nanorods (NR) supported bimetallic CuOx and RuOx catalysts (Cu: Ru ratios of 9:1, 7:3, and 5:5) were prepared using a wet impregnation method. In situ DRIFTS, H2 temperature programmed reduction (H2-TPR), CO temperature programmed desorption (CO-TPD), and other characterization techniques were used to investigate the effect of the Cu:Ru ratio on the activity of low-temperature CO oxidation. Among three catalysts, CeO2 NR supported 7 wt% Cu-3 wt% Ru catalyst after a reduction activation treatment showed the best performance with 100 % CO conversion at 166 °C and the lowest activation energy of 18.37 kJ mol-1. Raman and XPS profiles revealed that the origin of the superior performance is at least partially related to the high surface oxygen vacancy concentration and other distinct oxygen species (physi-/chemi-sorbed oxygen and bulk lattice oxygen), leading to outstanding adsorption and oxidation property of CO.

Bulk and Surface Contributions to Ionisation Potentials of Metal Oxides

Determining the absolute band edge positions in solid materials is crucial for optimising their performance in wide-ranging applications including photocatalysis and electronic devices. However, obtaining absolute energies is challenging, as seen in CeO2 , where experimental measurements show substantial discrepancies in the ionisation potential (IP). Here, we have combined several theoretical approaches, from classical electrostatics to quantum mechanics, to elucidate the bulk and surface contributions to the IP of metal oxides. We have determined a theoretical bulk contribution to the IP of stoichiometric CeO2 of only 5.38 eV, while surface orientation results in intrinsic IP variations ranging from 4.2 eV to 8.2 eV. Highly tuneable IPs were also found in TiO2 , ZrO2 , and HfO2 , in which surface polarisation plays a pivotal role in long-range energy level shifting. Our analysis, in addition to rationalising the observed range of experimental results, provides a firm basis for future interpretations of experimental and computational studies of oxide band structures.

Ce-based solid-phase catalysts for phosphate hydrolysis as new tools for next-generation nanoarchitectonics

This review comprehensively covers synthetic catalysts for the hydrolysis of biorelevant phosphates and pyrophosphates, which bridge between nanoarchitectonics and biology to construct their interdisciplinary hybrids. In the early 1980s, remarkable catalytic activity of Ce4+ ion for phosphate hydrolysis was found. More recently, this finding has been extended to Ce-based solid catalysts (CeO2 and Ce-based metal-organic frameworks (MOFs)), which are directly compatible with nanoarchitectonics. Monoesters and triesters of phosphates, as well as pyrophosphates, were effectively cleaved by these catalysts. With the use of either CeO2 nanoparticles or elegantly designed Ce-based MOF, highly stable phosphodiester linkages were also hydrolyzed. On the surfaces of all these solid catalysts, Ce4+ and Ce3+ coexist and cooperate for the catalysis. The Ce4+ activates phosphate substrates as a strong acid, whereas the Ce3+ provides metal-bound hydroxide as an eminent nucleophile. Applications of these Ce-based catalysts to practical purposes are also discussed.

Atomic-scale insights into the interfacial charge transfer in a NiO/CeO2 heterostructure for electrocatalytic hydrogen evolution

To understand the underlying mechanism of the interfacial charge transfer and local chemical state variation in the nonprecious-based hydrogen evolution reaction (HER) electrocatalysts, a model system of the NiO/CeO₂ heterostructure was chosen for investigation using a combination of the advanced electron microscopic characterization and first-principles calculations. The results directly proved that interfacial charge transfer occurs from Ni to Ce, leading to reduction in the valence state of Ce and increased formation of V_O. This would optimize ΔG_H* and facilitate the hydrogen evolution process, resulting in outstanding HER performance in 1 M KOH with a low overpotential of 99 mV at the current density of 10 mA•cm^-2 and a modest Tafel slope of 78.4 mV•dec^-1 for the NiO/CeO₂ heterostructure sample. Therefore, the improved HER performance could be attributed to the synergistic coupling interactions and electron redistribution at the interface of NiO and CeO₂. These results concretely demonstrate the direct determination of the interfacial structure of the heterostructure and provide atomistic insights to unravel the underlying mechanism of interfacial charge transfer induced HER performance improvement.

Size of cerium dioxide support nanocrystals dictates reactivity of highly dispersed palladium catalysts

The catalytic performance of heterogeneous catalysts can be tuned by modulation of the size and structure of supported transition metals, which are typically regarded as the active sites. In single-atom metal catalysts, the support itself can strongly affect the catalytic properties. Here, we demonstrate that the size of cerium dioxide (CeO₂) support governs the reactivity of atomically dispersed palladium (Pd) in carbon monoxide (CO) oxidation. Catalysts with small CeO₂ nanocrystals (~4 nanometers) exhibit unusually high activity in a CO-rich reaction feed, whereas catalysts with medium-size CeO₂ (~8 nanometers) are preferred for lean conditions. Detailed spectroscopic investigations reveal support size-dependent redox properties of the Pd-CeO₂ interface.

Boosting CO Catalytic Oxidation Performance via Highly Dispersed Copper Atomic Clusters: Regulated Electron Interaction and Reaction Pathways

Copper-loaded ceria (Cu/CeO₂) catalysts have become promising for the catalytic oxidation of industrial CO emissions. Since their superior redox property mainly arises from the synergistic effect between Cu and the CeO₂ support, the dispersion state of Cu species may dominate the catalytic performance of Cu/CeO₂ catalysts: the extremely high or low dispersity is disadvantageous for the catalytic performance. The nanoparticle catalysts usually present few contact sites, while the single-atom catalysts tend to be passivated due to their relatively single valence state. To achieve a suitable dispersion state, we synthesized a superior Cu/CeO₂ catalyst with Cu atomic clusters, realizing high atomic exposure and unit atomic activity simultaneously via favorable electron interaction and an anchoring effect. The catalyst reaches a 90% CO conversion at 130 °C, comparable to noble-metal catalysts. According to combined in situ spectroscopy and density functional theory calculations, the superior CO oxidation performance of the Cu atomic cluster catalyst results from the joint efforts of effective adsorption of CO at the electrophilic sites, the CO spillover phenomenon, and the efficient bicarbonate pathway triggered by hydroxyl. By providing a superior atomic cluster catalyst and uncovering the catalytic oxidation mechanism of Cu-Ce dual-active sites, our work may enlighten future research on industrial gaseous pollutant removal.

Rational Design of Precious-Metal Single-Atom Catalysts for Methane Combustion

Supported precious-metal single-atom catalysts (PM SACs) have emerged as a new frontier of high-performance catalytic material with 100% atom utilization efficiency. However, the rational design of such material with guidance from fundamental understandings of the structure-activity relationship remains challenging. Here, we report the synthesis, characterizations, and mechanistic investigation of various PM SACs supported on nanoceria for CH₄ combustion. Using density functional theory, two descriptors as the d-band center of PMs and oxygen vacancy formation energy are established, which jointly govern the reactivity for CH₄ combustion. These descriptors are thus applied to predict a dual SAC consisting of proximate Pd and Rh sites, demonstrating a remarkable improvement versus Pd or Rh catalyst, respectively. Our results reveal the general strategy of integrating experimental and computational efforts for investigation of various PM SACs in methane combustion, thus paving the way for the next generation of advanced catalytic materials.

Surface differences of oxide nanocrystals determined by geometry and exogenously coordinated water molecules

Determining the different surfaces of oxide nanocrystals is key in developing structure-property relations. In many cases, only surface geometry is considered while ignoring the influence of surroundings, such as ubiquitous water on the surface. Here we apply 17O solid-state NMR spectroscopy to explore the facet differences of morphology-controlled ceria nanocrystals considering both geometry and water adsorption. Tri-coordinated oxygen ions at the 1st layer of ceria (111), (110), and (100) facets exhibit distinct 17O NMR shifts at dry surfaces while these 17O NMR parameters vary in the presence of water, indicating its non-negligible effects on the oxide surface. Thus, the interaction between water and oxide surfaces and its impact on the chemical environment should be considered in future studies, and solid-state NMR spectroscopy is a sensitive approach for obtaining such information. The work provides new insights into elucidating the surface chemistry of oxide nanomaterials.

Nanofiber Composites as Highly Active and Robust Anodes for Direct-Hydrocarbon Solid Oxide Fuel Cells

Direct utilization of methane fuels in solid oxide fuel cells (SOFCs) is a key technology to realize the immediate inclusion of such high-efficiency fuel cells into the current electricity generation infrastructure. However, the broad commercialization of direct-methane fueled SOFCs is critically hindered by the inadequate electrode activity and their poor longevity, which primarily stems from the carbon build-up issues. To make the technology more competitive, a novel electrode structure that can dramatically improve the tolerance against coking is essential. Herein, we present highly active and robust core-shell nanofiber anodes, La_0.75Sr_0.25Cr_0.5Mn_0.5O₃@Sm_0.2Ce_0.8O_1.9 (LSCM@SDC), directly obtained with a single-nozzle electrospinning process through the use of two immiscible polymers. The intimate coverage of SDC on LSCM not only increases the active reaction sites but also promotes resistance toward carbon deposition and thermal aggregation. As such, the electrode polarization resistance obtained with LSCM@SDC NFs is among the lowest value ever reported with LSCM derivatives (∼0.11 Ω cm² in wet H₂ at 800 °C). The facile fabrication process of such complex heterostructures developed in this work is attractive for the design of not only SOFC electrodes but also other solid-state devices such as electrolysis cells, membrane reformers, and protonic cells.

Shape-Controlled Pathways in the Hydrogen Production from Ethanol Steam Reforming over Ceria Nanoparticles

The ethanol surface reaction over CeO₂ nanooctahedra (NO) and nanocubes (NC), which mainly expose (111) and (100) surfaces, respectively, was studied by means of infrared spectroscopy (TPSR-IR), mass spectrometry (TPSR-MS), and density functional theory (DFT) calculations. TPSR-MS results show that the production of H₂ is 2.4 times higher on CeO₂-NC than on CeO₂-NO, which is rationalized starting from the different types of adsorbed ethoxy species controlled by the shape of the ceria particles. Over the CeO₂(111) surface, monodentate type I and II ethoxy species with the alkyl chain perpendicular or parallel to the surface, respectively, were identified. Meanwhile, on the CeO₂(100) surface, bidentate and monodentate type III ethoxy species on the checkerboard O-terminated surface and on a pyramid of the reconstructed (100) surface, respectively, are found. The more labile surface ethoxy species on each ceria nanoshape, which are the monodentate type I or III ethoxy on CeO₂-NO and CeO₂-NC, respectively, react on the surface to give acetate species that decompose to CO₂ and CH₄, while H₂ is formed via the recombination of hydroxyl species. In addition, the more stable monodentate type II and bidentate ethoxy species on CeO₂-NO and CeO₂-NC, respectively, give an ethylenedioxy intermediate, the binding of which is facet-dependent. On the (111) facet, the less strongly bound ethylenedioxy desorbs as ethylene, whereas on the (100) facet, the more strongly bound intermediate also produces CO₂ and H₂ via formate species. Thus, on the (100) facet, an additional pathway toward H₂ formation is found. ESR activity measurements show an enhanced H₂ production on the nanocubes.

Light-to-Hydrogen Improvement Based on Three-Factored Au@CeO2/Gr Hierarchical Photocatalysts

Recently, various attempts have been made for light-to-fuels conversion, often with limited performance. Herein we report active and lasting three-factored hierarchical photocatalysts consisting of plasmon Au, ceria semiconductor, and graphene conductor for hydrogen production. The Au@CeO₂/Gr_2.0 entity (graphene outer shell thickness of 2.0 nm) under visible-light irradiation exhibits a colossal achievement (8.0 μmol mg_cat^-1 h^-1), which is 2.2- and 14.3-fold higher than those of binary Au@CeO₂ and free-standing CeO₂ species, outperforming the currently available catalysts. Yet, it delivers a high maximum quantum yield efficiency of 38.4% at an incident wavelength of 560 nm. These improvements are unambiguously attributed to three indispensable effects: (1) the plasmon resonant energy is light-excited and transferred to produce hot electrons localizing near the surface of Au@CeO₂, where (2) the high-surface-area Gr conductive shell will capture them to direct hydrogen evolution reactions, and (3) the active graphene hybridized on the defect-rich surface of Au@CeO₂ favorably adsorbs hydrogen atoms, which all bring up thorough insight into the working of a ternary Au@CeO₂/Gr catalyst system in terms of light-to-hydrogen conversion.

Elucidating Active CO–Au Species on Au/CeO2(111): A Combined Modulation Excitation DRIFTS and Density Functional Theory Study

In this work we elucidate the main steps of the CO oxidation mechanism over Au/CeO2(111), clarifying the course of CO adsorption at a broad variety of surface sites as well as of transmutations of one CO species into another. By combining transient spectroscopy with DFT calculations we provide new evidence that the active centers for CO conversion are single gold atoms. To gain insight into the reaction mechanism, we employ Modulation Excitation (ME) DRIFT spectroscopy in combination with the mathematical tool of Phase Sensitive Detection to identify the active species and perform DFT calculations to facilitate the assignments of the observed bands. The transient nature of the ME-DRIFTS method allows us to sort the observed species temporally, providing further mechanistic insight. Our study highlights the potential of combined transient spectroscopy and theoretical calculations (DFT) to clarify the role of adsorbates observed and to elucidate the reaction mechanism of CO oxidation over supported gold and other noble-metal catalysts.

Increasing Oxygen Vacancy of CeO2 Nanocrystals by Ni Doping and reduced Graphene Oxides Decoration towards the Electrocatalytic Hydrogen Evolution

The oxygen vacancy (VO) engineering is proved to be an effective approach for improving the hydrogen evolution reaction (HER) performance of low-cost metal oxides electrocatalysts. Cerium dioxide (CeO2), one of...

Understanding Dimethyl Methylphosphonate Adsorption and Decomposition on Mesoporous CeO2

The increased risk of chemical warfare agent usage around the world has intensified the search for high-surface-area materials that can strongly adsorb and actively decompose chemical warfare agents. Dimethyl methylphosphonate (DMMP) is a widely used simulant molecule in laboratory studies for the investigation of the adsorption and decomposition behavior of sarin (GB) gas. In this paper, we explore how DMMP interacts with the as-synthesized mesoporous CeO₂. Our mass spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy measurements indicate that DMMP can dissociate on mesoporous CeO₂ at room temperature. Two DMMP dissociation pathways are observed. Based on our characterization of the as-synthesized material, we built the pristine and hydroxylated (110) and (111) CeO₂ surfaces and simulated the DMMP interaction on these surfaces with density functional theory modeling. Our calculations reveal an extremely low activation energy barrier for DMMP dissociation on the (111) pristine CeO₂ surface, which very likely leads to the high activity of mesoporous CeO₂ for DMMP decomposition at room temperature. The two reaction pathways are possibly due to the DMMP dissociation on the pristine and hydroxylated CeO₂ surfaces. The significantly higher activation energy barrier for DMMP to decompose on the hydroxylated CeO₂ surface implies that such a reaction on the hydroxylated CeO₂ surface may occur at higher temperatures or proceed after the pristine CeO₂ surfaces are saturated.

Defect-rich CeO2 in a hollow carbon matrix engineered from a microporous organic platform: a hydroxide-assisted high performance pseudocapacitive material

A microporous organic polymer (MOP) was utilized for the engineering of nanoparticulate CeO₂ in a hollow carbon matrix (H-C/CeO₂). After CeO₂ nanoparticles were incorporated into a hollow MOP platform (H-MOP) through the decomposition of cerium acetate, successive carbonization produced H-C/CeO₂. The redox feature of defective CeO₂ in a conductive carbon matrix induced promising pseudocapacitive behavior. In particular, the H-C/CeO₂ showed excellent electrochemical performance in an alkaline electrolyte (KOH), due to the hydroxide ion-assisted redox behavior of defective CeO₂. H-C/CeO₂-3 with an optimized amount of CeO₂ showed specific capacitances of up to 527 (@0.5 A g^-1) and 493 F g^-1 (@1 A g^-1). Even at high current densities of 10 and 20 A g^-1, the H-C/CeO₂-3 maintained high capacitances of 458 and 440 F g^-1, respectively. After 10 000 cycling tests, the H-C/CeO₂-3 retained the 94-95% capacitance of the first cycle.

Facile Room-Temperature Synthesis of Cerium Carbonate and Cerium Oxide Nano- and Microparticles Using 1,1'-Carbonyldiimidazole and Imidazole in a Nonaqueous Solvent

Ceria nanoparticles (CeONPs) are versatile materials due to their unique catalytic properties, and cerium carbonate particles (CeCbPs) have been widely used as precursors for cerium oxide due to their ease of production. Urea is a widely used precipitant and a source of carbonate ions for the synthesis of CeONPs and CeCbPs, and the reaction temperature is important for controlling the rate of urea decomposition. However, the precise control of the temperature is often difficult, especially in large-scale reactions. Herein, we propose a homogeneous precipitation method that uses 1,1'-carbonyldiimidazole (CDI) and imidazole in acetone without heating. The decomposition rate of CDI can be controlled by the amount of water in the reaction mixture. In the synthesis of CeCbPs, unique particle morphologies of plate-, flying-saucer-, and macaron-like shapes and a wide range of sizes from 180 nm to 13 μm can be achieved by adjusting the amount of CDI, imidazole, and water in the reaction. These CeCbPs are transformed into ceria particles by calcination while maintaining their characteristic morphology. Moreover, the direct synthesis of 130 nm spherical CeONPs was possible by decreasing the amount of CDI in the reaction and the mixing time. These nanoparticles exhibited higher production efficiency and superior reactive oxygen species (ROS) scavenging properties compared to the other CeONPs obtained from calcination. These results demonstrate a novel method using CDI and imidazole in the synthesis of CeONPs and CeCbPs without the aid of a heating process, which may be useful in the large-scale synthesis and application of CeO nanomaterials.

Facet-dependent stability of near-surface oxygen vacancies and excess charge localization at CeO2surfaces

To study the dependence of the relative stability of surface (V^A) and subsurface (V^B) oxygen vacancies with the crystal facet of CeO₂, the reduced (100), (110) and (111) surfaces, with two different concentrations of vacancies, were investigated by means of density functional theory (DFT + U) calculations. The results show that the trend in the near-surface vacancy formation energies for comparable vacancy spacings, i.e. (110) < (100) < (111), does not follow the one in the surface stability of the facets, i.e. (111) < (110) < (100). The results also reveal that the preference of vacancies for surface or subsurface sites, as well as the preferred location of the associated Ce³⁺polarons, are facet- and concentration-dependent. At the higher vacancy concentration, theV^Ais more stable than theV^Bat the (110) facet whereas at the (111), it is the other way around, and at the (100) facet, both theV^Aand theV^Bhave similar stability. The stability of theV^Avacancies, compared to that of theV^B, is accentuated as the concentration decreases. Nearest neighbor polarons to the vacant sites are only observed for the less densely packed (110) and (100) facets. These findings are rationalized in terms of the packing density of the facets, the lattice relaxation effects induced by vacancy formation and the localization of the excess charge, as well as the repulsive Ce³⁺-Ce³⁺interactions.

In Situ Generation of the Surface Oxygen Vacancies in a Copper-Ceria Catalyst for the Water-Gas Shift Reaction

The dissociation of H₂O is a crucial aspect for the water-gas shift reaction, which often occurs on the vacancies of a reducible oxide support. However, the vacancies sometimes run off, thus inhibiting H₂O dissociation. After high-temperature treatment, the ceria supports were lacking vacancies because of sintering. Unexpectedly, the in situ generation of surface oxygen vacancies was observed, ensuring the efficient dissociation of H₂O. Due to the surface reconstruction of ceria nanorods, the copper species sustained were highly dispersed on the sintered support, on which CO was adsorbed efficiently to react with hydroxyls from H₂O dissociation. In contrast, no surface reconstruction occurred in ceria nanoparticles, leading to the sintering of copper species. The sintered copper species were averse to adsorb CO, so the copper-ceria nanoparticle catalyst had poor reactivity even when surface oxygen vacancies could be generated in situ.

Tailoring the Local Environment of Platinum in Single-Atom Pt1 /CeO2 Catalysts for Robust Low-Temperature CO Oxidation

A single-atom Pt₁ /CeO₂ catalyst formed by atom trapping (AT, 800 °C in air) shows excellent thermal stability but is inactive for CO oxidation at low temperatures owing to over-stabilization of Pt²⁺ in a highly symmetric square-planar Pt₁ O₄ coordination environment. Reductive activation to form Pt nanoparticles (NPs) results in enhanced activity; however, the NPs are easily oxidized, leading to drastic activity loss. Herein we show that tailoring the local environment of isolated Pt²⁺ by thermal-shock (TS) synthesis leads to a highly active and thermally stable Pt₁ /CeO₂ catalyst. Ultrafast shockwaves (>1200 °C) in an inert atmosphere induced surface reconstruction of CeO₂ to generate Pt single atoms in an asymmetric Pt₁ O₄ configuration. Owing to this unique coordination, Pt₁ ^δ+ in a partially reduced state dynamically evolves during CO oxidation, resulting in exceptional low-temperature performance. CO oxidation reactivity on the Pt₁ /CeO₂ _TS catalyst was retained under oxidizing conditions.

Tomographic Study of Mesopore Formation in Ceria Nanorods

Porosity in functional oxide nanorods is a recently discovered new type of microstructure, which is not yet fully understood and still under evaluation for its impact on applications in catalysis and gas/ion storage. Here we explore the shape and distribution of pores in ceria in three dimensions using a modified algorithm of geometric tomography as a reliable tool for reconstructing defective and strained nanoobjects. The pores are confirmed as "negative-particle" or "inverse-particle" cuboctahedral shapes located exclusively beneath the flat surface of the rods separated via a sub-5 nm thin ceria wall from the outside. New findings also comprise elongated "negative-rod" defects, seen as embryonic nanotubes, and pores in cube-shaped ceria. Furthermore, we report near-sintering secondary heat treatment of nanorods and cubes, confirming persistence of pores beyond external surface rounding. We support our experiments with molecular modeling and predict that the growth history of voids is via diffusion and aggregation of atomic point defects. In addition, we use density functional theory to show that the relative stability of pore (shape) increases in the order "cuboidal" < "hexagonal-prismatic" < "octahedral". The results indicate that by engineering voids into nanorods, via a high-temperature postsynthetic heat treatment, a potential future alternative route of tuning catalytic activities might become possible.

Vibrational Frequencies of Cerium-Oxide-Bound CO: A Challenge for Conventional DFT Methods

In ceria-based catalysis, the shape of the catalyst particle, which determines the exposed crystal facets, profoundly affects its reactivity. The vibrational frequency of adsorbed carbon monoxide (CO) can be used as a sensitive probe to identify the exposed surface facets, provided reference data on well-defined single crystal surfaces together with a definitive theoretical assignment exist. We investigate the adsorption of CO on the CeO_{2}(110) and (111) surfaces and show that the commonly applied DFT(PBE)+U method does not provide reliable CO vibrational frequencies by comparing with state-of-the-art infrared spectroscopy experiments for monocrystalline CeO_{2} surfaces. Good agreement requires the hybrid DFT approach with the HSE06 functional. The failure of conventional density-functional theory (DFT) is explained in terms of its inability to accurately describe the facet- and configuration-specific donation and backdonation effects that control the changes in the C─O bond length upon CO adsorption and the CO force constant. Our findings thus provide a theoretical basis for the detailed interpretation of experiments and open up the path to characterize more complex scenarios, including oxygen vacancies and metal adatoms.

Recent Advances in the Design and Photocatalytic Enhanced Performance of Gold Plasmonic Nanostructures Decorated with Non-Titania Based Semiconductor Hetero-Nanoarchitectures

Plasmonic photocatalysts combining metallic nanoparticles and semiconductors have been aimed as versatile alternatives to drive light-assisted catalytic chemical reactions beyond the ultraviolet (UV) regions, and overcome one of the major drawbacks of the most exploited photocatalysts (TiO2 or ZnO). The strong size and morphology dependence of metallic nanostructures to tune their visible to near-infrared (vis-NIR) light harvesting capabilities has been combined with the design of a wide variety of architectures for the semiconductor supports to promote the selective activity of specific crystallographic facets. The search for efficient heterojunctions has been subjected to numerous studies, especially those involving gold nanostructures and titania semiconductors. In the present review, we paid special attention to the most recent advances in the design of gold-semiconductor hetero-nanostructures including emerging metal oxides such as cerium oxide or copper oxide (CeO2 or Cu2O) or metal chalcogenides such as copper sulfide or cadmium sulfides (CuS or CdS). These alternative hybrid materials were thoroughly built in past years to target research fields of strong impact, such as solar energy conversion, water splitting, environmental chemistry, or nanomedicine. Herein, we evaluate the influence of tuning the morphologies of the plasmonic gold nanostructures or the semiconductor interacting structures, and how these variations in geometry, either individual or combined, have a significant influence on the final photocatalytic performance.

Elucidating the Oxygen Storage-Release Dynamics in Ceria Nanorods by Combined Multi-Wavelength Raman Spectroscopy and DFT

The oxygen storage-release dynamics in ceria nanorods is elucidated by using a combination of in situ multi-wavelength Raman spectroscopy and density functional theory calculations. Ceria nanorods exposing CeO₂(100) and CeO₂(110) facets are shown to be characterized by highly facet-dependent properties regarding molecular oxygen activation and decomposition as well as lattice oxygen dynamics. Temperature-dependent Raman results show that oxygen is stored in the form of peroxide species on the (100) facets, which are then released as gaseous oxygen, whereas lattice oxygen is involved with the (110) facets. On the latter, peroxide species first decompose into oxygen atoms that heal vacant lattice oxygen sites before being released as gaseous oxygen. The exposure of different facets makes ceria nanorods an interesting material for catalytic applications, because they allow the use of a mixture of oxygen storage-release functions, as well as their synergistic interactions, in a single system.

Surface Refaceting Mechanism on Cubic Ceria

Polar surfaces of solid oxides are intrinsically unstable and tend to reconstruct due to the diverging electrostatic energy and thus often exhibit unique physical and chemical properties. However, a quantitative description of the restructuring mechanism of these polar surfaces remains challenging. Here we provide an atomic-level picture of the refaceting process that governs the surface polarity compensation of cubic ceria nanoparticles based on the accurate reference data acquired from the well-defined model systems. The combined results from advanced infrared spectroscopy, atomic-resolved transmission electron microscopy, and density functional theory calculations identify a two-step scenario where an initial O-terminated (2 × 2) reconstruction is followed by a severe refaceting via massive mass transport at elevated temperatures to yield {111}-dominated nanopyramids. This significant surface restructuring promotes the redox properties of ceria nanocubes, which account for the enhanced catalytic activity for CO oxidation.

Polarization-dependent vibrational shifts on dielectric substrates

The interaction of light with matter at surfaces of dielectrics strongly depends on polarization. Here, we present the first infrared spectroscopic evidence for significant polarization effects in the spectroscopic detection of adsorbate vibrational frequencies. In addition to much larger peak intensities for p-polarized light relative to s-polarization, a small but distinct blue shift was identified for CO adsorbed at the surfaces of two prototype dielectric substrates, CeO2(111) and CaCO3(10.4). A simulation using a layer model yields very good agreement with experiment.