Enhanced and Optically Switchable Proton Conductivity in a Melting Coordination Polymer Crystal

Proton Conduction in Chiral Molecular Assemblies of Azolium-Camphorsulfonate Salts

Chiral molecular assemblies have attracted considerable attention because of their interesting physical properties, such as spin-selective electron transport. Cation-anion salts of three azolium cations, imidazolium (HIm+), triazolium (HTrz+), and thiazolium (HThz+), in combination with a chiral camphorsulfonate (1S-CS-) and their racemic compounds (rac-CS-) were prepared and compared in terms of phase transitions, crystal structures, dynamics of constituent molecules, dielectric responses, and proton conductivities. The cation-anion crystals containing HIm+ showed no significant difference in proton conductivity between the homochiral and racemic crystals, whereas the HTrz+-containing crystals showed higher proton conductivity and lower activation energy in the homochiral form than in the racemic form. A two-dimensional hydrogen-bonding network consisting of HTrz+ and -SO3- groups and similar in-plane rotational motion was observed in both crystals; however, the HTrz+ cation in the homochiral crystal exhibited the rotational motion modulated with translational motion, whereas the HTrz+ cation in the racemic crystal exhibited almost steady in-plane rotational motion. The different motional degrees of freedom were confirmed by crystal structure analyses and temperature- and frequency-dependent dielectric constants. In contrast, steady in-plane rotational motion with the thermally activated fluctuating motion of CS- was observed both in homochiral and racemic crystals containing HIm+, which averaged the motional space of protons resulting in similar dielectric responses and proton conductivities. The control of motional degrees of freedom in homochiral crystals affects the proton conductivity and is useful for the design of molecular proton conductors.

Mechanochemically-induced glass formation from two-dimensional hybrid organic-inorganic perovskites

Hybrid organic-inorganic perovskites (HOIPs) occupy a prominent position in the field of materials chemistry due to their attractive optoelectronic properties. While extensive work has been done on the crystalline materials over the past decades, the newly reported glasses formed from HOIPs open up a new avenue for perovskite research with their unique structures and functionalities. Melt-quenching is the predominant route to glass formation; however, the absence of a stable liquid state prior to thermal decomposition precludes this method for most HOIPs. In this work, we describe the first mechanochemically-induced crystal-glass transformation of HOIPs as a rapid, green and efficient approach for producing glasses. The amorphous phase was formed from the crystalline phase within 10 minutes of ball-milling, and exhibited glass transition behaviour as evidenced by thermal analysis techniques. Time-resolved in situ ball-milling with synchrotron powder diffraction was employed to study the microstructural evolution of amorphisation, which showed that the crystallite size reaches a comminution limit before the amorphisation process is complete, indicating that energy may be further accumulated as crystal defects. Total scattering experiments revealed the limited short-range order of amorphous HOIPs, and their optical properties were studied by ultraviolet-visible (UV-vis) spectroscopy and photoluminescence (PL) spectroscopy.

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Meltable Aluminum Molecular Rings with Fluorescence and Nonlinear Optical Properties

Crystal-liquid-glass, which combines the tunable properties of crystalline compounds with the processability of glasses, has emerged as a new class of materials for fabricating bulk-shapable devices in real applications. Inspired by the characteristics of deep eutectic solvent (DES) mixtures involving significant depressions in melting points compared to their neat constituent components, in this study, we designed and synthesized the first examples of meltable aluminum oxo clusters (AlOCs) via lattice doping with DESs at the molecular level. The abundant and strong hydrogen bonding between the aluminum molecular ring, DES components, and lattice solvents is postulated to be the root that affords melting point depressions and, thus, "melting" clusters. We prepared a transparent bubble-free glass film under autogenous pressure using a hot-press method. These cluster-based films exhibited luminescent and nonlinear optical properties similar to those of pristine crystalline compounds. Our study belongs to the interdisciplinary disciplines of chemistry and physics. It not only breaks the limitations of crystalline glass on metal and ligand types but also acts as a general guide for extending the range of meltable crystalline materials.

Excited-State Proton Transfer in a Photoacid-Based Crystalline Coordination Compound: Reversible Photochromism, Near-Infrared Photothermal Conversion, and Conductivity

By harnessing the power of coordination self-assembly, crystalline materials can act as carriers for photoacids. Unlike their solution-based counterparts, these photoacids are capable of altering the properties of the crystalline material under light and can even generate proton transfer in a solid-state environment. Due to the photoinduced proton transfer and charge transfer processes within this functional material, this crystal exhibits powerful absorption spanning the visible to near-infrared spectrum upon light irradiation. This feature enables reproducible, significant chromatic variation, near-infrared photothermal conversion, and photocontrollable conductivity for this photoresponsive material. The findings suggest that the synthesis of pyranine photoacid-based crystalline materials via coordination self-assembly can not only enhance light-harvesting efficiency but also enable excited-state proton transfer processes within solid crystalline materials, thereby maintaining and even improving the properties of photoacids.

Development of an Iron(II) Complex Exhibiting Thermal- and Photoinduced Double Proton-Transfer-Coupled Spin Transition in a Short Hydrogen Bond

Multiple proton transfer (PT) controllable by external stimuli plays a crucial role in fundamental chemistry, biological activity, and material science. However, in crystalline systems, controlling multiple PT, which results in a distinct protonation state, remains challenging. In this study, we developed a novel tridentate ligand and iron(II) complex with a short hydrogen bond (HB) that exhibits a PT-coupled spin transition (PCST). Single-crystal X-ray and neutron diffraction measurements revealed that the positions of the two protons in the complex can be controlled by temperature and photoirradiation based on the thermal- and photoinduced PCST. The obtained results suggest that designing molecules that form short HBs is a promising approach for developing multiple PT systems in crystals.

Metal-organic framework glass composites

The melting phenomenon in metal-organic frameworks (MOFs) has been recognised as one of the fourth generation MOF paradigm behaviours. Molten MOFs have high processibility for producing mechanically robust glassy MOF macrostructures, and they also offer highly tunable interfacial characteristics when combined with other types of functional materials, such as crystalline MOFs, inorganic glass and metal halide perovskites. As a result, MOF glass composites have emerged as a family of functional materials with dynamic properties and hierarchical structural control. These nanocomposites allow for sophisticated materials science studies as well as the fabrication of next-generation separation, catalysis, optical, and biomedical devices. Here, we review the approaches for designing, fabricating, and characterising MOF glass composites. We determine the key application opportunities enabled by these composites and explore the remaining hurdles, such as improving thermal and chemical compatibility, regulating interfacial properties, and scalability.

Functions and applications of emerging metal-organic-framework liquids and glasses

Traditional metal-organic-frameworks (MOFs) have been extensively studied and applied in various fields across chemistry, biology and engineering in the past decades. Recently, a family of emerging MOF liquids and glasses have gained ever-growing research interests owing to their fascinating phase transitions and unique functions. To date, a growing number of MOF crystals have been found to be capable of transforming into liquid and glassy states under external stimuli, which overcomes the limitations of MOF crystals by introducing functional disorder in a controlled manner and offering some desirable properties. This review is dedicated to compiling recent advances in the fundamental understanding of the phase and structure evolution during crystal melting and glass formation in order to give insights into the underlying conversion mechanism. Benefiting from the disordered metal-ligand arrangement and free grain boundaries, various functional properties of liquid and glassy MOFs including porosity, ionic conductivity, and optical/mechanical properties are summarized and evaluated in detail, accompanied by the structure-property correlation. At the same time, their potential applications are further assessed from a developmental perspective according to their unique functions. Finally, we summarize the current progress in the development of liquid/glassy MOFs and point out the serious challenges as well as the potential solutions. This work provides perspectives on the functional applications of liquid/glassy MOFs and highlights the future research directions for the advancement of MOF liquids and glasses.

Pore Geometry and Surface Engineering of Covalent Organic Frameworks for Anhydrous Proton Conduction

Developing new materials for anhydrous proton conduction under high-temperature conditions is significant and challenging. Herein, we create a series of highly crystalline covalent organic frameworks (COFs) via a pore engineering approach. We simultaneously engineer the pore geometry (generating concave dodecagonal nanopores) and pore surface (installing multiple functional groups such as -C=N-, -OH, -N=N- and -CF₃ ) to improve the utilization efficiency and host-guest interaction of proton carriers, hence benefiting the enhancement of anhydrous proton conduction. Upon loading with H₃ PO₄ , COFs can realize a proton conductivity of 2.33×10^-2  S cm^-1 under anhydrous conditions, among the highest values of all COF materials. These materials demonstrate good stability and maintain high proton conductivity over a wide temperature range (80-160 °C). This work paves a new way for designing COFs for anhydrous proton conduction applications, which shows great potential as high-temperature proton exchange membranes.

Eutectic CsHSO4-Coordination Polymer Glasses with Superprotonic Conductivity

Superprotonic phase transition in CsHSO₄ allows fast protonic conduction, but only at temperatures above the transition temperature of 141 °C (T_c). Here, we preserve the superprotonic conductivity of CsHSO₄ by forming a binary CsHSO₄-coordination polymer glass system, showing eutectic melting. Their anhydrous proton conductivities below T_c are at least 3 orders of magnitude higher than CsHSO₄ without compromising conductivity at higher temperatures or the need for humidification, reaching 6.3 mS cm^-1 at 180 °C. The glass also introduces processability to the conductor, as its viscosity below 10³ Pa·s can be achieved at 65 °C. Solid-state NMR and X-ray pair distribution functions reveal the oxyanion exchanges and the origin of the preserved conductivity. Finally, we demonstrate the preparation of a micrometer-scale thin-film proton conductor showing low resistivity with high transparency (transmittance >85% between 380-800 nm).

Three-Dimensional Metal-Organic Network Glasses from Bridging MF62- Anions and Their Dynamic Insights by Solid-State NMR

Glassy-state coordination polymers (CPs) are a new class of network-forming glasses. In this work, we constructed glass-forming CPs composed of both anionic and neutral ligands as network formers. With the use of hexafluoro anions (MF₆^2-) and 1,3-bis(4-pyridyl)propane (bpp), two isostructural CP crystals, [Zn(SiF₆)(bpp)₂] (ZnSi) and [Zn(TiF₆)(bpp)₂] (ZnTi), were synthesized. Solid-state ¹⁹F NMR revealed rotational motion of MF₆^2- with dissociation and re-formation of the Zn-F coordination bonds in both CP crystals, which reflects the thermodynamic parameters related to the glass formability. The mobility of SiF₆^2- is larger than that of TiF₆^2-, suggesting a higher glass formability of ZnSi. When mechanical ball milling was conducted, ZnSi completely changed into a glassy state, whereas ZnTi showed incomplete glass formation. Examination of the amorphous structures elucidated retention and partial destruction of the Zn-F coordination bonds in ball-milled ZnSi and ZnTi, respectively. These results provide the relationship between the ligand dynamics and glass formability of CPs.

Novel Approach for Detecting Vapors of Acids and Bases with Proton-Transfer Luminescent Dyes Encapsulated within Metal-Organic Frameworks

Luminescent metal-organic frameworks (LMOFs) are one of the most promising materials for being implemented as active layers in the fabrication of photonic devices such as luminescent sensors of harmful chemicals. It is highly desirable that these materials undergo quantifiable spectroscopic (absorption or emission) changes in the presence of vapors of those analytes, as in many industrial processes, these toxic compounds are in the gas phase. Although great progresses have been achieved in the field, in most of the examples reported hitherto, the detection of chemicals by LMOFs is attained in solution. Herein, we present a novel approach consisting of the encapsulation of proton transfer dyes (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt, HPTS, and 3-hydroxyflavone, 3-HF) within the pores of two distinct MOFs. The trapped proton transfer dyes (PT-dyes) may exist as different structures (enol, anion, or zwitterion), each of these exhibiting unique optical properties. Indeed, our findings reveal that the dyes can be encapsulated as anionic or enol species. Remarkably, the PT-dye@MOF composites exhibit a high luminescence quantum yield (up to 30%), which is sensitive (showing shifting in the emission wavelengths with a concomitant quenching/enhancement of the intensity) in the presence of vapors of an acid (HCl) and a base (triethylamine). These results open a novel avenue for the development of smarter vapoluminescent MOF-based materials.

The Dual Use of the Pyranine (HPTS) Fluorescent Probe: A Ground-State pH Indicator and an Excited-State Proton Transfer Probe

Molecular fluorescent probes are an essential experimental tool in many fields, ranging from biology to chemistry and materials science, to study the localization and other environmental properties surrounding the fluorescent probe. Thousands of different molecular fluorescent probes can be grouped into different families according to their photophysical properties. This Account focuses on a unique class of fluorescent probes that distinguishes itself from all other probes. This class is termed photoacids, which are molecules exhibiting a change in their acid-base transition between the ground and excited states, resulting in a large change in their pKa values between these two states, which is thermodynamically described using the Förster cycle. While there are many different photoacids, we focus only on pyranine, which is the most used photoacid, with pKa values of ∼7.4 and ∼0.4 for its ground and excited states, respectively. Such a difference between the pKa values is the basis for the dual use of the pyranine fluorescent probe. Furthermore, the protonated and deprotonated states of pyranine absorb and emit at different wavelengths, making it easy to focus on a specific state. Pyranine has been used for decades as a fluorescent pH indicator for physiological pH values, which is based on its acid-base equilibrium in the ground state. While the unique excited-state proton transfer (ESPT) properties of photoacids have been explored for more than a half-century, it is only recently that photoacids and especially pyranine have been used as fluorescent probes for the local environment of the probe, especially the hydration layer surrounding it and related proton diffusion properties. Such use of photoacids is based on their capability for ESPT from the photoacid to a nearby proton acceptor, which is usually, but not necessarily, water. In this Account, we detail the photophysical properties of pyranine, distinguishing between the processes in the ground state and the ones in the excited state. We further review the different utilization of pyranine for probing different properties of the environment. Our main perspective is on the emerging use of the ESPT process for deciphering the hydration layer around the probe and other parameters related to proton diffusion taking place while the molecule is in the excited state, focusing primarily on bio-related materials. Special attention is given to how to perform the experiments and, most importantly, how to interpret their results. We also briefly discuss the breadth of possibilities in making pyranine derivatives and the use of pyranine for controlling dynamic reactions.

Photoresponsive proton conduction in Zr-based metal-organic frameworks using the photothermal effect

A highly stable and porous MOF [Zr₂(H₄TPPP)(OH/F)₂]·xH₂O (1) containing a metal-free porphyrin-phosphonate ligand is reported. It shows high proton conductivity of 1.2 × 10^-3 S·cm^-1 at 25 °C and 95% RH, a photothermal effect over a wide spectral range from UV-vis to NIR, and photo-enhanced and switchable proton conductivity.

Switched Proton Conduction in Metal-Organic Frameworks

Stimuli-responsive materials can respond to external effects, and proton transport is widespread and plays a key role in living systems, making stimuli-responsive proton transport in artificial materials of particular interest to researchers due to its desirable application prospects. On the basis of the rapid growth of proton-conducting porous metal-organic frameworks (MOFs), switched proton-conducting MOFs have also begun to attract attention. MOFs have advantages in crystallinity, porosity, functionalization, and structural designability, and they can facilitate the fabrication of novel switchable proton conductors and promote an understanding of the comprehensive mechanisms. In this Perspective, we highlight the current progress in the rational design and fabrication of stimuli-responsive proton-conducting MOFs and their applications. The dynamic structural change of proton transfer pathways and the role of trigger molecules are discussed to elucidate the stimuli-responsive mechanisms. Subsequently, we also discuss the challenges and propose new research opportunities for further development.

Light-Controlled Ionic/Molecular Transport through Solid-State Nanopores and Nanochannels

Biological nanochannels perfectly operate in organisms and exquisitely control mass transmembrane transport for complex life process. Inspired by biological nanochannels, plenty of intelligent artificial solid-state nanopores and nanochannels are constructed based on various materials and methods with the development of nanotechnology. Specially, the light-controlled nanopores/nanochannels have attracted much attention due to the unique advantages in terms of that ion and molecular transport can be regulated remotely, spatially and temporally. According to the structure and function of biological ion channels, light-controlled solid-state nanopores/nanochannels can be divided into light-regulated ion channels with ion gating and ion rectification functions, and light-driven ion pumps with active ion transport property. In this review, we present a systematic overview of light-controlled ion channels and ion pumps according to the photo-responsive components in the system. Then, the related applications of solid-state nanopores/nanochannels for molecular sensing, water purification and energy conversion are discussed. Finally, a brief conclusion and short outlook are offered for future development of the nanopore/nanochannel field.

A Visible Light/Heat Responsive Covalent Organic Framework for Highly Efficient and Switchable Proton Conductivity

In recent years, covalent organic frameworks (COFs) have attracted enormous interest as a new generation of proton-exchange membranes, chemical sensors and electronic devices. However, to design high proton conductivity COFs,...

Light-Modulated Cationic and Anionic Transport across Protein Biopolymers*

Light is a convenient source of energy and the heart of light-harvesting natural systems and devices. Here, we show light-modulation of both the chemical nature and ionic charge carrier concentration within a protein-based biopolymer that was covalently functionalized with photoacids or photobases. We explore the capability of the biopolymer-tethered photoacids and photobases to undergo excited-state proton transfer and capture, respectively. Electrical measurements show that both the photoacid- and photobase-functionalized biopolymers exhibit an impressive light-modulated increase in ionic conductivity. Whereas cationic protons are the charge carriers for the photoacid-functionalized biopolymer, water-derived anionic hydroxides are the suggested charge carriers for the photobase-functionalized biopolymer. Our work introduces a versatile toolbox to photomodulate both protons and hydroxides as charge carriers in polymers, which can be of interest for a variety of applications.

Progress in Multifunctional Metal-Organic Frameworks/Polymer Hybrid Membranes

The fabrication of state-of-the-art membranes with customized functions and high efficiency is of great significance, but presents challenges. Emerging metal-organic frameworks (MOFs)/polymer hybrid membranes have provided bright promise as an innovative platform to target multifunctional hybrid materials and devices; this is thanks to their unique properties, which come from three components that are collaboratively enforced. This minireview provides a brief overview of recent progress in the construction of such hybrid membranes, and highlights some of their very important applications in separation, conduction, and sensing.

Mechanics, Ionics, and Optics of Metal-Organic Framework and Coordination Polymer Glasses

Melt and glassy states of coordination polymers (CPs)/metal-organic frameworks (MOFs) have gained attention as a new class of amorphous materials. Many bridging ligands such as azolate, nitrile, thiocyanide, thiolate, pyridine, sulfonate, and amide are available to construct crystals with melting temperatures in the range of 60-593 °C. Here, we discuss the mechanism of crystal melting, glass structures, and mechanical properties by considering both experimental and theoretical studies. High and exclusive H⁺ or Li⁺ conductivities in moldable CP glasses have been proven in the all-solid-state devices such as fuel cells or secondary batteries. Transparent glasses with wide composition and available dopants are also attractive for nonlinear optics, photoconductivity, emission, and light-harvesting. The ongoing challenge in the field is to develop the design principles of CP/MOF melts and glasses, corresponding functions of mass (ion, electron, photon, phonon, and so forth). transport and conversion, and the integration of devices with the use of their tunable mechanical properties.

Insights in the Ionic Conduction inside Nanoporous Metal-Organic Frameworks by Using an Appropriate Equivalent Circuit

The conduction of protons and other ions in nanoporous materials, such as metal-organic frameworks (MOFs), is intensively explored with the aim of enhancing the performance of energy-related electrochemical systems. The ionic conductivity, as a key property of the material, is typically determined by using electrochemical impedance spectroscopy (EIS) in connection with a suitable equivalent circuit. Often, equivalent circuits are used where the physical meaning of each component is debatable. Here, we present an equivalent circuit for the ionic conduction of electrolytes in nanoporous, nonconducting materials between inert and impermeable electrodes without faradaic electrode reactions. We show the equivalent circuit perfectly describes the impedance spectra measured for the ion conduction in MOFs in the form of powders pressed into pellets as well as for MOF thin films. This is demonstrated for the ionic conduction of an aprotic ionic liquid, and of various protic solvents in different MOF structures. Due to the clear physical meaning of each element of the equivalent circuit, further insights into the electrical double layer forming at the MOF-electrode interface can be obtained. As a result, EIS combined with the appropriate reference circuit allows us to make statements of the quality of the MOF-substrate interface of different MOF-film samples.

Metal-organic frameworks as proton conductors: strategies for improved proton conductivity

Recent studies on proton conductivity using pristine MOFs and their composite materials have established an outstanding area of research owing to their potential applications for the development of high performance solid state proton conductors (SSPCs) and proton exchange membranes (PEMs) in fuel cells (FCs). MOFs, as crystalline organic and inorganic hybrid materials, provide a large number of degrees of freedom in their framework composition, coordination environment, and chemically functionalized pores for the targeted design of improved proton carriers, functioning over a wide range of temperature and humidity conditions. Herein, our efforts have been emphasized on fundamental principles and different design strategies to achieve enhanced proton conductivity with appropriate examples. We also have discussed the modification mechanism of MOF-composite materials and mixed matrix membranes for commercial applications in FCs. Thus, this review aims to direct readers' attention towards the design strategies and structure-property relationship for proton transport in MOFs.

Coordination Geometry Changes in Amorphous Cyanide-Bridged Metal-Organic Frameworks upon Water Adsorption

Amorphous coordination polymers and metal-organic frameworks (MOFs) have attracted much attention owing to their various functionalities. Here, we demonstrate the tunable water adsorption behavior of a series of amorphous cyanide-bridged MOFs with different metals (M[Ni(CN)₄]: MNi; M = Mn, Fe, and Co). All three compounds adsorb up to six water molecules at a certain vapor pressure (P_ads) and undergo conversion to crystalline Hofmann-type MOFs, M(H₂O)₂[Ni(CN)₄]·4H₂O (MNi-H₂O; M = Mn, Fe, and Co). The P_ads of MnNi, FeNi, and CoNi for water adsorption is P/P₀ = 0.4, 0.6, and 0.9, respectively. Although the amorphous nature of these materials prevented structural elucidation using X-ray crystallography techniques, the local-scale structure around the N-coordinated M²⁺ centers was analyzed using L_2,3-, K-edge X-ray absorption fine structure, and magnetic measurements. Upon hydration, the coordination geometry of these metal centers changed from tetrahedral to octahedral, resulting in significant reorganization of the MOF local structure. On the other hand, Ni[Ni(CN)₄] (NiNi) containing square-planar Ni²⁺ centers did not undergo significant structural transformation and therefore abruptly adsorbed H₂O in the low-pressure region. We could thus define how changes in the bond lengths and coordination geometry are related to the adsorption properties of amorphous MOF systems.

Cooperative phenomenon of vapochromism and proton conduction of luminescent Pt(ii) complexes for the visualisation of proton conductivity

The luminescent and proton conductive Pt(ii) complex [PtCl(tpy-o-py)]Cl and its HCl adduct [PtCl(tpy-o-pyH)]Cl₂ (o-Pt and o-Pt·HCl, respectively; tpy-o-py = 2,2':6',2''-terpyridine-6',2'''-pyridine) were synthesised and their crystal structures, vapochromic behaviour, and proton conduction, were investigated and compared to those of the para isomers [PtCl(tpy-p-py)]Cl and [PtCl(tpy-p-pyH)]Cl₂ (p-Pt and p-Pt·HCl, respectively; tpy-p-py = 2,2':6',2''-terpyridine-4',4'''-pyridine). X-ray structure analysis revealed that the intermolecular metallophilic (PtPt) interaction was negligible in o-Pt but effective in o-Pt·HCl. Reversible transformation between o-Pt and o-Pt·HCl coupled with significant colour and luminescence changes was achieved by four different external stimuli, namely: exposure of o-Pt to humid HCl gas to form o-Pt·HCl, heating, exposure to MeOH vapour, and finally drying in air to regenerate the original o-Pt. The intraligand π-π* orange emission observed for o-Pt exhibited negligible dependence on the relative humidity (RH). Conversely, o-Pt·HCl exhibited red metal-metal-to-ligand charge-transfer (MMLCT) phosphorescence at 725 nm, originating from effective intermolecular Pt-Pt interactions, and interesting vapochromic behaviour that was dependent on the RH. Notably, o-Pt·HCl presented higher conductivity than the p-Pt·HCl isomer at RH < 80%. This trend was reversed at RH values > 80%, probably owing to the second water-adsorption-induced transformation of p-Pt·HCl. The cooperative phenomenon between the proton conduction and vapochromic behaviour observed for both o-Pt·HCl and p-Pt·HCl should allow the visualisation of the proton-conducting pathway, without the need for a bulk electrode, via the absorption and emission colours at both macroscopic and microscopic levels.

Designing disorder into crystalline materials

Crystals are a state of matter characterized by periodic order. Yet, crystalline materials can harbour disorder in many guises, such as non-repeating variations in composition, atom displacements, bonding arrangements, molecular orientations, conformations, charge states, orbital occupancies or magnetic structure. Disorder can sometimes be random but, more usually, it is correlated. Frontier research into disordered crystals now seeks to control and exploit the unusual patterns that persist within these correlated disordered states in order to access functional responses inaccessible to conventional crystals. In this Review, we survey the core design principles that guide targeted control over correlated disorder. We show how these principles - often informed by long-studied statistical mechanical models - can be applied across an unexpectedly broad range of materials, including organics, supramolecular assemblies, oxide ceramics and metal-organic frameworks. We conclude with a forward-looking discussion of the exciting link between disorder and function in responsive media, thermoelectrics and topological phases.

Transparent and luminescent glasses of gold thiolate coordination polymers

Obtaining transparent glasses made of functional coordination polymers (CPs) represents a tremendous opportunity for optical applications. In this context, the first transparent and red-emissive glasses of gold thiolate CPs have been obtained by simply applying mechanical pressure to amorphous powders of CPs. The three gold-based CP glasses are composed of either thiophenolate [Au(SPh)] n , phenylmethanethiolate [Au(SMePh)] n or phenylethanethiolate [Au(SEtPh)] n . The presence of a longer alkyl chain between the thiolate and the phenyl ring led to the formation of glass with higher transparency. The glass transitions, measured by thermomechanical analysis (TMA), occurred at lower temperature for CPs with longer alkyl chains. In addition, all three gold thiolate glasses exhibit red emission at 93 K and one of them, [Au(SMePh)] n , remains luminescent even at room temperature. An in-depth structural study of the amorphous gold thiolates by XRD, PDF and EXAFS analysis showed that they are formed of disordered doubly interpenetrated helical chains. These d10 metal-based compounds represent the first examples of transparent and luminescent CP glasses.

Metal-Organic Frameworks as a Versatile Platform for Proton Conductors

Metal-organic frameworks (MOFs) are an intriguing type of crystalline porous materials that can be readily built from metal ions or clusters and organic linkers. Recently, MOF materials, featuring high surface areas, rich structural tunability, and functional pore surfaces, which can accommodate a variety of guest molecules as proton carriers and to systemically regulate the proton concentration and mobility within the available space, have attracted tremendous attention for their roles as solid electrolytes in fuel cells. Recent advances in MOFs as a versatile platform for proton conduction in the field of humidity condition proton-conduction, anhydrous atmosphere proton-conduction, single-crystal proton-conduction, and including MOF-based membranes for fuel cells, are summarized and highlighted. Furthermore, the challenges, future trends, and prospects of MOF materials for solid electrolytes are also discussed.

Stable melt formation of 2D nitrile-based coordination polymer and hierarchical crystal–glass structuring

2D nitrile-based coordination polymer crystal shows over 110 °C of windows of liquid state and it forms a glass monolith.

Structural features of proton-conducting metal organic and covalent organic frameworks

Proton conductivity in MOFs and COFs have been attracted due to their applicability as electrolytes in proton exchange membrane fuel cells. A short overview with recent updates on the structural features of MOFs and COFs for proton conduction are presented here.

Enhancement of Intrinsic Proton Conductivity and Aniline Sensitivity by Introducing Dye Molecules into the MOF Channel

The encapsulation of dyes into metal-organic frameworks (MOFs) has generated a variety of platforms for luminescence, but little attention has been paid to their application in proton conduction. Here, a cationic MOF {{[In₃OL_1.5(H₂O)₃](NO₃)}·(DMA)₃·(CH₃CN)₆·(H₂O)₃₀} _n (FJU-10, H₄L = 4,4',4″,4‴-(1,4-phenylenbis(pyridine-4,2,6-triyl))-tetrabenzoic acid, DMA = N, N-dimethylacetamide) was synthesized, and the dye molecule 8-hydroxy-1,3,6-pyrenetrisulfonic acid trisodium salt (HPTS) was further added to the MOF growth solution, but during the reaction, HPTS was nitrated and nitrated HPTS was encapsulated into the FJU-10 to obtain dye@FJU-10. As a result, the intrinsic proton conductivity of dye@FJU-10 is nearly 5 times higher than that of FJU-10 at 90 °C. Dye@FJU-10 exhibits more sensitive fluorescence quenching toward aniline than FJU-10 in DMF solution (the detection limits of FJU-10 and dye@FJU-10 are as low as 0.58 and 0.62 μM, respectively). Here, it is demonstrated for the first time that intrinsic proton conductivity can be effectively improved by encapsulating a nitrated HPTS dye into an MOF.

Flux melting of metal-organic frameworks

Recent demonstrations of melting in the metal-organic framework (MOF) family have created interest in the interfacial domain between inorganic glasses and amorphous organic polymers. The chemical and physical behaviour of porous hybrid liquids and glasses is of particular interest, though opportunities are limited by the inaccessible melting temperatures of many MOFs. Here, we show that the processing technique of flux melting, 'borrowed' from the inorganic domain, may be applied in order to melt ZIF-8, a material which does not possess an accessible liquid state in the pure form. Effectively, we employ the high-temperature liquid state of one MOF as a solvent for a secondary, non-melting MOF component. Differential scanning calorimetry, small- and wide-angle X-ray scattering, electron microscopy and X-ray total scattering techniques are used to show the flux melting of the crystalline component within the liquid. Gas adsorption and positron annihilation lifetime spectroscopy measurements show that this results in enhanced, accessible porosity to a range of guest molecules in the resultant flux melted MOF glass.