Spontaneous Weaving of Graphitic Carbon Networks Synthesized by Pyrolysis of ZIF-67 Crystals

High-performance electromagnetic wave absorption in FeS2/SnS2@multi-walled carbon nanotube composites with honeycomb-shaped structure

In this work, we synthesized composites of ferrous disulfide and tin disulfide with multi-walled carbon nanotubes (MWCNTs) using a straightforward hydrothermal method. The incorporation of carbon nanotubes significantly enhanced the dielectric loss capability of the composites. When the filling ratio of FeS2/SnS2@CNTs (20 wt%) in paraffin was 40%, the effective absorption bandwidth was 3.28 GHz, while the minimum reflection loss (RL) value was as high as -39.2 dB, which corresponded to a thickness of only 1.4 mm. This work reveals the potential research value of this material in terms of thin thickness, strong absorption and light mass.

Triphase Enzyme Electrode Based on ZIF-8 with Enhanced Oxidase Catalytic Kinetics and Bioassay Performance

Oxidase enzyme-based electrochemical bioassays have garnered considerable interest due to their specificity and high efficiency. However, in traditional solid-liquid diphase enzyme electrode systems, the low solubility of oxygen and its slow mass transfer rate limit the oxidase catalytic reaction kinetics, thereby affecting the bioassay performance, including the detection accuracy, sensitivity, and linear dynamic range. ZIF-8 nanoparticles (NPs) possess hydrophobic and high-porosity characteristics, enabling them to serve as oxygen nanocarriers. In this work, we constructed a solid-liquid-air triphase enzyme electrode by encapsulating ZIF-8 NPs within an oxidase network. Hydrophobic ZIF-8 NPs can provide a rapid and sufficient supply of oxygen for the oxidase-catalyzed reactions, which enhances and stabilizes the kinetics of oxidase-catalyzed reactions. This approach eliminates the issue of "oxygen deficiency" at the traditional solid-liquid diphase interface. Consequently, the triphase enzyme electrode exhibits a 12-fold higher linear detection range than the diphase system and possesses good detection accuracy in electrolytes even with fluctuating oxygen levels. This work proposes a novel approach to construct triphase reaction systems for addressing the gas deficiency problem in heterogeneous catalysis.

Design and Synthesis of Transferrable Macro-Sized Continuous Free-Standing Metal-Organic Framework Films for Biosensor Device

Metal organic framework (MOF) films have attracted abundant attention due to their unique characters compared with MOF particles. But the high-temperature reaction and solvent corrosion limit the preparation of MOF films on fragile substrates, hindering further applications. Fabricating macro-sized continuous free-standing MOF films and transferring them onto fragile substrates are a promising alternative but still challenging. Here, a universal strategy to prepare transferrable macro-sized continuous free-standing MOF films with the assistance of oxide nanomembranes prepared by atomic layer deposition and studied the growth mechanism is developed. The oxide nanomembranes serve not only as reactant, but also as interfacial layer to maintain the integrality of the free-standing structure as the stacked MOF particles are supported by the oxide nanomembrane. The centimeter-scale free-standing MOF films can be transferred onto fragile substrates, and all in one device for glucose sensing is assembled. Due to the strong adsorption toward glucose molecules, the obtained devices exhibit outstanding performance in terms of high sensitivity, low limit of detection, and long durability. This work opens a new window toward the preparation of MOF films and MOF film-based biosensor chip for advantageous applications in post-Moore law period.

Improved H2O2 Electrosynthesis on S-doped Co-N-C through Cooperation of Co-S and Thiophene S

Co-N-C based catalysts have emerged as a prospective alternative for H2O2 electrosynthesis via a selective 2e- oxygen reduction reaction (ORR). However, conventional Co-N-C with Co-N4 configurations usually exhibits low selectivity toward 2e- ORR for H2O2 production. In this study, the S-doped Co-N-C (Co-N-C@S) catalysts were designed and synthesized for enhancing the electrosynthesis of H2O2, and their S doping levels and species were tuned to investigate their relationship with the H2O2 yield. The results showed that the S doping greatly enhanced the activity and selectivity of Co-N-C@S for H2O2 production. The optimal Co-N-C@S(12) displayed a high H2O2 production rate of 395 mmol gcat-1 h-1, H2O2 selectivity of 76.06%, and Faraday efficiency of 91.66% at 0.2 V, which were obviously better than those of Co-N-C (H2O2 production rate of 44 mmol gcat-1 h-1, H2O2 selectivity of 26.63%, and Faraday efficiency of 17.37%). Moreover, the Co-N-C@S(12) based electron-Fenton system displayed effective rhodamine B (RhB) removal, significantly outperforming the Co-N-C-based system. Experimental results combined with density functional theory unveiled that the enhanced performance of Co-N-C@S(12) stemmed from the combined effect of Co-S and thiophene S, which jointly enhanced electron density of the Co center, reduced the desorption energy of the *OOH intermediate, and then promoted the production of H2O2.

A novel catalyst derived from Co-ZIFs to grow N-doped carbon nanotubes for all-solid-state supercapacitors with high performance

Carbon nanotubes (CNTs) have been widely used as electrode materials for electrochemical energy storage devices (e.g., supercapacitors) due to their excellent chemical and physical properties. However, conventional approaches (e.g., electron-beam vapor deposition and atomic layer deposition) to fabricate catalysts for the growth of CNTs are complex and demand high energy consumption. Herein, we report a facile method to synthesize catalysts derived from cobalt-containing zeolitic imidazolate frameworks (Co-ZIFs), which is exploited to in situ construct the three-dimensional (3D) CNT hybrid materials for all-solid-state supercapacitors. In brief, Co-ZIFs with a controllable structure is first grown on the inner porous surface of carbon foams pyrolyzed from commercial melamine foams, followed by thermal annealing and chemical vapor deposition to grow CNTs, achieving 3D free-standing CNT-based hybrids. The well-distributed Co-ZIFs in the carbon foam enable the grown CNTs with uniform structures and morphologies. Using the fabricated CNT-based hybrid as electrodes, the assembled all-solid-state supercapacitors show a high specific capacitance of 19.4 mF cm-2 at a current density of 0.5 mA cm-2, which could be further optimized to as high as 871.8 mF cm-2 by incorporating the pseudocapacitive material of manganese dioxide in CNT-based hybrids. This study provides a facile solution approach to fabricate the catalyst for the growth of a CNT inner porous substrate; the resultant 3D free-standing hybrids could be used as efficient electrodes for high-performance energy storage devices beyond supercapacitors.

Advanced Oxidation Nanoprocessing Boosts Immunogenicity of Whole Tumor Cells

Whole tumor cells expressing a wide array of tumor antigens are considered as a highly promising source of antigens for cancer vaccines. However, simultaneously preserving the antigen diversity, improving immunogenicity, and eliminating the potential tumorigenic risk of whole tumor cells are highly challenging. Inspired by the recent progress in sulfate radical-based environmental technology, herein, an advanced oxidation nanoprocessing (AONP) strategy is developed for boosting the immunogenicity of whole tumor cells. The AONP is based on the activation of peroxymonosulfate by ZIF-67 nanocatalysts to produce SO4 -∙ radicals continuously, leading to sustained oxidative damage to tumor cells and consequently extensive cell death. Importantly, AONP causes immunogenic apoptosis as evidenced by the release of a series of characteristic damage associated molecular patterns and at the same time maintains the integrity of cancer cells, which is critical to preserve the cellular components and thus maximize the diversity of antigens. Finally, the immunogenicity of AONP-treated whole tumor cells is evaluated in a prophylactic vaccination model, demonstrating significantly delayed tumor growth and increased survival rate of live tumor-cell-challenged mice. It is expected that the developed AONP strategy would pave the way to develop effective personalized whole tumor cell vaccines in future.

Real-Time Imaging and Quantitative Evolution for Pyrolysis of Carbon Dots-Encapsulated Metal-Organic Frameworks at the Nanoscale by In Situ Environmental Transmission Electron Microscopy

The pyrolysis of metal-organic frameworks (MOF) has been widely used approach to generate hierarchical structures with the corresponding metal, metal carbide, or metal oxide nanoparticles embedded in a porous carbon matrix with a high specific surface area for industrial catalysis, energy storage and transfer, etc. MOF-derived heterogeneous catalysts can be constructed by the encapsulation of carbon dots (CDs) with plenty of hydroxyl and amine groups to enhance the performance of the final product. Controlled formation of metallic carbon structures at the nanoscale, especially matter cycling and transformation on the nanoscale interface, is important for the production of industrial catalysts as well as the research of materials science and engineering progress. However, the mass transfer at the nanoscale during the processing of MOF pyrolysis remains less understood due to the lack of direct observation. Herein, by using in situ environmental transmission electron microscopy, real-time imaging and quantitative evolution of porous carbon decorated with metal species by the pyrolysis of CDs-encapsulated zeolitic imidazolate framework-67 are achieved. The migration of Co, the flow of aggregates, and the growth of carbon nanotubes observed in the nanoscale pyrolysis laboratory working at 600 °C with an air atmosphere are present. Experimental studies based on reduction and oxidation reaction models reveal that the synergistic effect between doped graphite nitrogen and confined Co nanoparticles is beneficial for boosting catalytic performance.

Biomimetic Metal-Organic Framework-Based Photonic Crystal Sensor for Highly Sensitive Visual Detection and Effective Discrimination of Benzene Vapor

Due to the large specific surface area and continuous pores in structures, metal-organic frameworks (MOFs) show great advantages in the adsorption of volatile organic compounds (VOCs). Photonic crystal (PC) sensors derived from MOFs are promising for the visual detection of VOC gases. However, they still have problems of low sensitivity and poor color saturation and tunability. Here, inspired by vapor-sensitive scales of Tmesisternus isabellae beetle and scattering light absorption of polydopamine, a porous one-dimensional PC sensor is constructed by combining ZIF-8 with TiO₂@PDA nanoparticles. The PC sensor shows significant color changes under different concentrations of benzene vapor and reaches a detection limit of 0.8 g/m³. It has a response time of less than 1 s and maintains stable optical performance after 100 times of reuse. Moreover, ZIF-67 and ZIF-7 are both incorporated into the PCs for comparison; it reveals that ZIF-8 shows superior benzene detecting property. Additionally, the synergistic adsorption of VOCs in inner and outer holes of the ZIF-8 layer is demonstrated by real-time mass monitoring with quartz crystal microbalance with dissipation. This study provides a valuable reference for the fabrication of high-quality MOF-based PC sensors and sensing mechanism study between microscopic molecular adsorption and macroscopic performance.

Autonomous metal-organic framework nanorobots for active mitochondria-targeted cancer therapy

Nanorobotic manipulation to access subcellular organelles remains unmet due to the challenge in achieving intracellular controlled propulsion. Intracellular organelles, such as mitochondria, are an emerging therapeutic target with selective targeting and curative efficacy. We report an autonomous nanorobot capable of active mitochondria-targeted drug delivery, prepared by facilely encapsulating mitochondriotropic doxorubicin-triphenylphosphonium (DOX-TPP) inside zeolitic imidazolate framework-67 (ZIF-67) nanoparticles. The catalytic ZIF-67 body can decompose bioavailable hydrogen peroxide overexpressed inside tumor cells to generate effective intracellular mitochondriotropic movement in the presence of TPP cation. This nanorobot-enhanced targeted drug delivery induces mitochondria-mediated apoptosis and mitochondrial dysregulation to improve the in vitro anticancer effect and suppression of cancer cell metastasis, further verified by in vivo evaluations in the subcutaneous tumor model and orthotopic breast tumor model. This nanorobot unlocks a fresh field of nanorobot operation with intracellular organelle access, thereby introducing the next generation of robotic medical devices with organelle-level resolution for precision therapy.

Doping Engineering of M-N-C Electrocatalyst Based Membrane-Electrode Assembly for High-Performance Aqueous Polysulfides Redox Flow Batteries

Polysulfides aqueous redox flow batteries (PS-ARFBs) with large theoretical capacity and low cost are one of the most promising solutions for large-scale energy storage technology. However, sluggish electrochemical redox kinetics and nonnegligible crossover of aqueous polysulfides restrict the battery performances. Herein, it is found that the Co, Zn dual-doped N-C complex have enhanced electrochemical adsorption behaviors for Na₂ S₂ . It exhibits significantly electrochemical redox activity compared to the bare glassy carbon electrode. And the redox reversibility is also improved from ΔV = 210 mV on Zn-doped N-C complex to ΔV = 164 mV on Co, Zn-doped N-C complex. Furthermore, membrane-electrode assembly (MEA) based on Co, Zn-doped N-C complex is firstly proposed to enhance the redox performances and relieve the crossover in PS-ARFBs. Thus, an impressively high and reversible capacity of 157.5 Ah L^-1 for Na₂ S₂ with a high capacity utilization of 97.9% could be achieved. Moreover, a full cell PS-ARFB with Na₂ S₂ anolyte and Na₄ [Fe(CN)₆ ] catholyte exhibits high energy efficiency ≈88.4% at 10 mA cm^-2 . A very low capacity decay rate of 0.0025% per cycle is also achieved at 60 mA cm^-2 over 200 cycles.

Promoted wet peroxide oxidation of chlorinated volatile organic compounds catalyzed by FeOCl supported on macro-microporous biomass-derived activated carbon

Chlorinated volatile organic compounds (CVOCs) are a recalcitrant class of air pollutants, and the strongly oxidizing reactive oxygen species (ROS) generated in advanced oxidation processes (AOPs) are promising to degrade them. In this study, a FeOCl-loaded biomass-derived activated carbon (BAC) has been used as an adsorbent for accumulating CVOCs and catalyst for activating H₂O₂ to construct a wet scrubber for the removal of airborne CVOCs. In addition to well-developed micropores, the BAC has macropores mimicking those of biostructures, which allows CVOCs to diffuse easily to its adsorption sites and catalytic sites. Probe experiments have revealed HO^• to be the dominant ROS in the FeOCl/BAC + H₂O₂ system. The wet scrubber performs well at pH 3 and H₂O₂ concentrations as low as a few mM. It is capable of removing over 90% of dichloroethane, trichloroethylene, dichloromethane and chlorobenzene from air. By applying pulsed dosing or continuous dosing to replenish H₂O₂ to maintain its appropriate concentration, the system achieves good long-term efficiency. A dichloroethane degradation pathway is proposed based on the analysis of intermediates. This work may provide inspiration for the design of catalyst exploiting the inherent structure of biomass for catalytic wet oxidation of CVOCs or other contaminants.

Transient and general synthesis of high-density and ultrasmall nanoparticles on two-dimensional porous carbon via coordinated carbothermal shock

Carbon-supported nanoparticles are indispensable to enabling new energy technologies such as metal-air batteries and catalytic water splitting. However, achieving ultrasmall and high-density nanoparticles (optimal catalysts) faces fundamental challenges of their strong tendency toward coarsening and agglomeration. Herein, we report a general and efficient synthesis of high-density and ultrasmall nanoparticles uniformly dispersed on two-dimensional porous carbon. This is achieved through direct carbothermal shock pyrolysis of metal-ligand precursors in just ~100 ms, the fastest among reported syntheses. Our results show that the in situ metal-ligand coordination (e.g., N → Co2+) and local ordering during millisecond-scale pyrolysis play a crucial role in kinetically dominated fabrication and stabilization of high-density nanoparticles on two-dimensional porous carbon films. The as-obtained samples exhibit excellent activity and stability as bifunctional catalysts in oxygen redox reactions. Considering the huge flexibility in coordinated precursors design, diversified single and multielement nanoparticles (M = Fe, Co, Ni, Cu, Cr, Mn, Ag, etc) were generally fabricated, even in systems well beyond traditional crystalline coordination chemistry. Our method allows for the transient and general synthesis of well-dispersed nanoparticles with great simplicity and versatility for various application schemes.

Ultrathin Carbon-Shell-Encapsulated Cobalt Nanoparticles with Balanced Activity and Stability for Lithium-Sulfur Batteries

High-performance metal-based catalysts are pursued to improve the sluggish reaction kinetics in lithium-sulfur batteries. However, it is challenging to achieve high catalytic activity and stability simultaneously due to the inevitable passivation of the highly active metal nanoparticles by lithium polysulfides (LiPSs). Herein, we show a design with well-balanced activity and stability to solve the above problem, that is, the cobalt (Co) nanoparticles (NPs) encapsulated with ultrathin carbon shells prepared by the one-step pyrolysis of ZIF-67. With an ultrathin carbon coating (∼1 nm), the direct exposure of Co NPs to LiPSs is avoided, but it allows the fast electron transfer from the highly active Co NPs to LiPSs for their conversion to the solid products, ensuring the efficient suppression of shuttling in long cycling. As a result, the sulfur cathode with such a catalyst exhibited good cycling stability (0.073% capacity fading over 500 cycles) and high sulfur utilization (638 mAh g^-1 after 180 cycles under a high sulfur mass loading of 7.37 mg cm^-2 and a low electrolyte/sulfur ratio of 5 μL mg^-1). This work provides insights into the rational design of a protection layer on a metal-based catalyst to engineer both high catalytic activity and stability toward high-energy and long-life Li-S batteries.

Chelation-Assisted formation of carbon nanotubes interconnected Yolk-Shell Silicon/Carbon anodes for High-Performance Lithium-ion batteries

As a viable replacement to commercial graphite anodes, silicon (Si) anodes have gained much attention from academics because of their considerable theoretical specific capacity and appropriate reaction voltage. Nevertheless, some limitations still exist in developing silicon anodes, including significant volume expansion and poor electrical conductivity. Herein, the carbon nanotubes (CNTs) interconnected yolk-shell silicon/carbon anodes (YS-Si@CoNC) were prepared via the chelation competition induced polymerization (CCIP) approach. The YS-Si@CoNC anode, designed in this study, demonstrates improved performance. At the current density of 0.5 A g^-1 and 1 A g^-1, a capacity of 1001 mAh g^-1 and 956.5 mAh g^-1 can be achieved after 150 cycles and after 300 cycles, respectively. In particular, at the current density of 5 A g^-1, the reversible specific capacity of 688 mAh g^-1 is realized. The exceptional outcomes are mainly attributed to the internal voids that adequately alleviate the volumetric expansion and the CNTs and carbon shells that provide an efficient conducting matrix to fasten the diffusion of electrons and lithium-ions. Our research presents a convenient way of designing Si/C anode materials with a yolk-shell structure to guarantee impressive electrical conductivity and robust structural integrity for high-performance LIBs.

2D MOF derived cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets for efficient Fenton-like catalysis: Tuning effect of oxygen functional groups in close vicinity to Co-N sites

Developing highly efficient catalysts for peroxymonosulfate (PMS) activation is an important issue in advanced oxidation processes (AOPs) technology. In this work, cobalt and nitrogen-doped ultrathin oxygen-rich carbon nanosheets derived from 2D metal-organic framework (MOF) were successfully fabricated. The as-prepared catalyst can effectively degrade tetracycline (TC) with a high reaction constant (0.088 min^-1). Quenching test, electron paramagnetic resonance (EPR) technology, and the electrochemical test indicate that the radical pathway plays a minor role in the degradation process, the ¹O₂ based nonradical pathway dominates the reaction. Experimental and density functional theory (DFT) studies revealed that the Co-N sites on the carbon structure serve as the dominant active sites, and the oxygen functional groups in close vicinity to Co-N sites can dramatically influence local electronic structure and its interaction with PMS molecule, a high correlation between the reaction constant and hydroxy groups content could be due to the Co-N sites close to hydroxyl groups has a moderate PMS adsorption energy. This work provides new insight into the design of highly efficient Fenton-like catalysts.

Optical and quantitative detection of cobalt ion using graphitic carbon nitride-based chemosensor for hydrometallurgy of waste lithium-ion batteries

A hydrometallurgy is one of the most important techniques for recycling waste LIBs, where identifying the exact composition of the metal-leached solution is critical in controlling the metal extraction efficiency and the stoichiometry of the regenerated product. In this study, we report a simple and selective optical detection of high-concentrated Co²⁺ using a graphitic carbon nitride (g-CN)-based fluorescent chemosensor. g-CN is prepared by molten salt synthesis using dicyandiamide (DCDA) and LiI/KI. The mass ratio of LiI/KI to DCDA modifies the resulting g-CN (CNI) in terms of in-plane molecular distances of base sites including cyano functional groups (─CN) and fluorescent emission wavelength via nucleophilic substitution. The fluorescent sensing performance of CNIs is evaluated through photoluminescence (PL) emission spectroscopy in a broad Co²⁺ concentration range (10^-4-10⁰ M). The correlation between the surface exposure of hidden nitrogen pots (base sites) and PL intensity change is achieved where the linear relationship between the PL quenching and the logarithm of Co²⁺ concentration in the analyte solution is well established with the regression of 0.9959. This study will provide the design principle of the chemosensor suitable for the fast and accurate optical detection of Co²⁺ present in a broad concentration range for hydrometallurgy for the recycling of waste LIBs.

Size-dependent acute toxicity and oxidative damage caused by cobalt-based framework (ZIF-67) to Photobacterium phosphoreum

Metal-organic frameworks (MOFs) are emerging nanomaterials with widespread applications for their superior properties. However, the potential health and environmental risks of MOFs still need further understanding. In this work, we investigated the toxicity of a typical cobalt-based MOF (ZIF-67) with varied primary particle sizes (100, 200, 400, 700 and 1200 nm) to Photobacterium Phosphoreum T3 strain, a kind of luminescent bacteria. The luminescence inhibition rate of all ZIF-67 nanoparticles (NPs) reached 40 % and higher at the concentration of 5 mg/L, exhibiting strong toxicity. Combined cellular assays and gene expression analysis confirmed that the general bioactivity inhibition and oxidative damage were induced mainly by ZIF-67 NPs, rather than Co²⁺ released from the ZIF-67 NPs. Additionally, the toxicity of ZIF-67 NPs demonstrated an evident size-dependent effect. For ZIF-67 smaller than 400 nm, the toxicity increased with the particle size decreased, while the trend was not significant when the particle size was larger than 400 nm. A potential explanation for this phenomenon is the smaller NPs (100 and 200 nm) may enter the cytoplasm, accumulating in the cytoplasm and causing more severe toxicity. Furthermore, Co²⁺ released from the ZIF-67 NPs was not the primary contributor to the toxic effect of ZIF-67 NPs which was verified by the toxicity results and the variation of toxicity-related indicators. These findings provided insight into the better design and safer use of MOFs, and it also implied the potential environmental risk of the MOF's cannot be ignored, especially for the bioapplication.

Surface Charge-Directed Efficient and Selective Catalytic Activities of Porous M@UiO-66 Composites (M = Pt or Ag) for Reduction of Organic Pollutants

Precisely constructed porous composites containing catalytically active nanoparticles can stabilize unstable nanoparticles, thus improving catalytic activity and longevity while preventing agglomeration of active nanoparticles. Herein, we report the confined incorporation of highly active metal nanoparticles within a metal-organic framework support and efficient catalytic performances in the reduction of organic pollutants, such as methylene blue (MB) and 4-nitrophenol (4-NP). UiO-66-based porous composites (M@UiO-66, M = Pt or Ag) containing well-dispersed metal nanoparticles are constructed via the one-step thermal treatment of UiO-66 implanted with metal ions (UiO-66/Mⁿ⁺, Mⁿ⁺ = Pt²⁺ or Ag⁺). The comprehensive features of M@UiO-66s, such as well-dispersed nanocatalysts, well-developed pores, and characteristic surface charges, expedite not only efficient but also selective catalytic activities in the reduction of MB or 4-NP, along with impressive recyclability.

Fabrication of cobaltous telluride and carbon composite as a promising carrier for boosting electro oxidation of ethylene glycol on palladium in alkaline medium

The development of highly active and earth-rich electrocatalysts remains a formidable challenge for the commercialization of fuel cells. Herein, a composite carrier composed of cobaltous telluride (CoTe) and carbon (C) has been designed for the first time to enhance the electrocatalytic performance of palladium (Pd) nanoparticles (NPs) for the electro-oxidation of ethylene glycol (EG). Remarkably, the mass activity for the as-prepared Pd/CoTe-C catalyst during the ethylene glycol oxidation reaction (EGOR) is found to reach up to 3917.3 mA mg^-1, which is 2.2 times higher than that of Pd/Co-C (1785.0 mA mg^-1) and 4.1 times greater than that of commercial Pd/C catalyst (962.4 mA mg^-1), exceeding that obtained for most Pd-based electrocatalysts reported thus far. In particular, the Pd/CoTe-C catalyst shows better electrochemical stability toward the EGOR than the Pd/Co-C and commercial Pd/C catalysts. Thus, the Pd/CoTe-C electrocatalyst is expected to exhibit broad application prospects in the field of fuel cells.

Enhanced Catalytic Performance of N-Doped Carbon Sphere-Supported Pd Nanoparticles by Secondary Nitrogen Source Regulation for Formic Acid Dehydrogenation

The development of catalysts with high selectivity, good catalytic activity, and excellent cycle performance is of significance for the application of formic acid (HCOOH, FA) as a hydrogen support. Herein, Pd is deposited on a series of N-doped carbons, which are prepared by cocarbonization of N-containing zeolite imidazole frameworks (ZIF-8) and other N/C sources (melamine, xylitol, urea, and glucose), for hydrogen generation from FA. The results demonstrate that the introduction of a secondary N/C source further affects the catalytic performance of Pd by adjusting the morphology, specific surface area, N content, and type of carbon. The effects of N atoms and the favorable reaction pathways of FA dehydrogenation were revealed by theoretical calculation. This work will improve the understanding of N doping on the decomposition mechanism of FA and provide a new approach for the rational design of metal-N-C materials.

Biobased polyporphyrin derived porous carbon electrodes for highly efficient capacitive deionization

Recently, capacitive deionization (CDI) has attracted considerable interest as a potential desalination technique for seawater. It is thus desirable to develop low-cost, sustainable, and efficient electrode materials for desalination. In this study, the polyporphyrin was prepared by a one-pot reaction from biobased furan derivative, followed by activation to manufacture nitrogen-doped polyporphyrin derived porous carbons (NPPCs) for efficient capacitive deionization. In the presence of KOH as a pore activator, NPPCs exhibited cross-linked interconnected nanosphere chain-like structures inherited from the polyporphyrin backbone with coexisting mesopores and micropores, leading to extremely high specific surface area (2979.3 m² g^-1) and large pore volume (2.22 cm³ g^-1). The electrochemical measurements revealed good conductivity, outstanding stability, and extraordinary specific capacitance (328.7 F g^-1) of NPPCs, which can be ascribed to rich nitrogen content (8.0 at%) and high Pyrrolic nitrogen ratio. Due to their superior hierarchical porous structure and excellent electrochemical performance, the NPPC-800 electrodes presented a high salt adsorption capacity (SAC) of 35.7 mg g^-1 and outstanding cycling stability in 10 mM NaCl solution at 1.2 V during the desalination tests. This work demonstrates the utilization of biobased porous carbon material will pave a prospective way in sustainable and potential applications for CDI technique.

Co-N/C-900 metal-organic framework-derived nanozyme as a H2O2-free oxidase mimic for the colorimetric sensing of L-cysteine

Nanozymes have attracted considerable attention as a new type of promising artificial enzyme in recent years. Here, an oxidase-like cobalt-nitrogen-carbon (Co-N/C-900) nanozyme with well-regulated metal atom spatial distribution has been derived from Co-Zn bimetal zeolitic imidazolate framework precursors and used to develop a facile colorimetric sensing method for L-cysteine. With the aid of Co-N/C-900, the colorless 3,3',5,5'-tetramethylbenzidine (TMB) was oxidized to blue oxidized TMB in the absence of H₂O₂. However, the oxidation was inhibited after the addition of L-cysteine, and the blue color faded to colorless. Thus, Co-N/C-900 exhibited quite good oxidase-like activity with high catalytic efficiency. Therefore, a facile and efficient colorimetric method to sensitively determine L-cysteine with a low detection limit of 33 nM (S/N = 3) has been developed. Furthermore, favorable selectivity and anti-interference ability towards the determination of L-cysteine based on this approach have also been achieved. It is believed that this colorimetric method for the detection of L-cysteine based on Co-N/C-900 will show potential applications in bioscience and bioengineering.

A Substrate-Induced Fabrication of Active Free-Standing Nanocarbon Film as Air Cathode in Rechargeable Zinc-Air Batteries

Designing cost-effective and high-efficiency bifunctional electrocatalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) occurred at air electrodes is vitally significant yet challenging for Zn-air batteries (ZABs). In this work, a zinc substrate induced fabrication is reported of free-standing nanocarbon hybrid film which shows good bifunctional activity and can be directly used as the air electrode in the rechargeable ZABs. The designed nanocarbon film in Zn-air battery provides a satisfactory power density of 185 mW cm^-2 and cycling stability for 1200 h under the current density of 10 mA cm^-2 . This hybrid film also gives a solid-state ZAB excellent flexibility with a power density of 160 mW cm^-2 . The free-standing hybrid with abundant cobalt-nitrogen-carbon species coupled with porous architecture would be the original factor for its satisfactory performance of rechargeable ZABs. This work would pave an ideal way to design integrated electrode with high electrocatalytic performance towards electrochemical energy technologies.

Metal organic framework-based nanostructure materials: applications for non-lithium ion battery electrodes

Non-lithium ion (e.g., Al3+, Ca2+, K+, Mg2+, Na+, and Zn2+) batteries have emerged as a promising platform for next-generation energy storage systems.

Hydrogenation of furfural over Pd@ZIF-67 derived catalysts: direct hydrogenation and transfer hydrogenation

Pd particles coated with ZIF-67 (Pd@ZIF-67) was prepared from the self-reduction of palladium acetate.

Fe–Ni–Co trimetallic oxide hierarchical nanospheres as high-performance bifunctional electrocatalysts for water electrolysis

Fe–Ni–Co spheres were used as bifunctional catalysts exhibit high total water decomposition activity. Only a cell voltage of 1.61 V was required to attain a current density of 10 mA cm−2.

F127-assisted preparation of FeCo nanoalloys encapsulated in nitrogen-doped carbon for efficient oxygen reduction reaction

A novel F127-assisted ZIF-67 pyrolysis strategy to construct FeCo nanoalloys encapsulated in nitrogen-doped carbon for efficient oxygen reduction reaction was reported.

Porous organic-inorganic hybrid materials for catalysis, energy and environmental applications

Introduction of organic functionalities into the porous inorganic materials make the resulting hybrid porous framework not only more flexible and hydrophobic, but also provide additional scope for further functionalization, which...

Graphene-like Carbon from Calcium Hydroxide

The development of inexpensive and environmentally friendly graphene-like carbon is critical for its integration into industrial products. This work highlights the production of graphene-like carbon structures from calcium hydroxide. The chemical vapor deposition conditions to grow graphitic carbon on a calcium hydroxide catalyst are reported. Acetylene, steam, and calcium hydroxide are used to grow a crumpled carbon morphology. The crumpled carbon resulted in a high surface area of 1276 m²/g and high electrical conductivity (>10⁵ S/m). Additionally, the significance and origin of the C 1s X-ray photoelectron spectroscopy (XPS) π-π* plasmon loss peak as it is related to high electrical conductivity is reported. A unique mechanism for the catalytic process involving calcium acetylide is proposed. Several deposition times, steam concentration, and catalyst morphology were tested to synthesize a variety of carbon morphologies from calcium-based materials. Crumpled carbon, hollow nanospheres, bamboo-like carbon nanotubes, multi-walled carbon nanotubes, and graphene fiber morphologies were all formed using calcium-based catalysts. Multiple reaction conditions, a scaled reaction (300 g), and catalyst recyclability were investigated. Calcium-based materials were then used as catalysts for the growth of other graphene-like carbons.

ZIF-67-derived N-doped double layer carbon cage as efficient catalyst for oxygen reduction reaction

The slow kinetic of oxygen reduction reaction (ORR) hampers the practical application of energy conversion devices, such as fuel cells, metal-air batteries. Here, an efficient ORR electrocatalyst consists of Co, Ni co-decorated nitrogen-doped double shell hollow carbon cage (Ni-Co@NHC) was fabricated by pyrolyzing Ni-doped polydopamine wrapped ZIF-67. During the preparation, polydopamine served as a protective layer can effectively prevent the aggregation of Co and Ni nanoparticles during the pyrolysis process, and at the same time forming a carbon layer to grow a double layer carbon cage. This unique hollow structure endows the catalyst with a high specific surface area as well as more exposed active sites. Also benefited from the synergistic effect between Ni and Co nanoparticles, the Ni-Co@NHC catalyst leads to an outstanding ORR performance of half-wave potential (E_1/2, 0.862 V), outperforms that of commercial Pt/C catalyst. Additionally, when Ni-Co@NHC was used in the cathode for the zinc-air battery, the cell exhibits high power density (108 mW cm^-2) and high specific capacity (806 mAh g^-1) at 20 mA cm^-2outperforming Pt/C. This work offers a promising design strategy for the development of high-performance ORR electrocatalysts.

Zeolite Imidazolate Frameworks-67 Precursor to Fabricate a Highly Active Cobalt-Embedded N-Doped Porous Graphitized Carbon Catalyst for the Thermal Decomposition of Ammonium Perchlorate

The more apparent specific heat release at a lower high-temperature decomposition (HTD) temperature of ammonium perchlorate (AP) poses a challenge for the development of highly active catalysts. In this work, a well-designed cobalt-embedded N-doped porous graphitized carbon (Co@NC) catalyst is obtained by high-temperature calcination of a zeolite imidazolate frameworks-67 precursor, in which the cobalt catalytic active center realizes effective nanoscale dispersion; meanwhile, the cobalt and N-doped porous graphitized carbon can release considerable heat after oxidation, and the cobalt oxides have an excellent catalytic effect on reducing the HTD temperature of AP. The catalytic activity of Co@NC was tested by a differential thermal analytical method. The results indicated that the HTD peak of AP was significantly decreased by 100.5 °C, the apparent activation energy of the HTD reaction of AP was reduced by 82.0 kJ mol-1, and the heat release compared with pure AP increased 2.9 times. On teh basis of these findings, Co@NC is expected to be one of the best candidate materials for AP thermal decomposition.

In situ fabrication of nitrogen doped graphitic carbon networks coating for high-performance extraction of pyrethroid pesticides

The tailor-prepare solid phase microextraction (SPME) coatings with stable and excellent properties to effectively extract analytes from sample matrix still remains a challenge. Herein, a nitrogen doped graphitic carbon networks (NG-CNTW) coated fiber was fabricated by direct carbonization of nanosized ZIF-67 crystals (nano-ZIF-67) that grown on stainless steel wire. The NG-CNTW coated fiber coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS) was applied for enrichment and determination of pyrethroids. The NG-CNTW coating exhibited high surface area and hierarchical porous structures that facilitate diffusion and accessibility of target molecules. Simultaneously, the nitrogen doped and highly graphitic structures endow the coating with high adsorption affinity for aromatic compounds. Under optimum conditions, the SPME-GC-MS/MS method presented wide range of linearity performance (0.08-200.0 ng g^-1), low limits of detection (0.02-0.5 ng g^-1) and good repeatability (RSD < 9.6%) for 8 kinds of pyrethroids. Furthermore, the proposed method was successfully applied in the determination of pyrethroids in grape and cauliflower samples, as the results were in the range of 3.16-15.06 ng g^-1and 2.08-9.29 ng g^-1, respectively. This work not only provides a new method by fabricating carbon nanomaterial coatings in situ derived from MOFs, but also shows great potential of MOFs derivative materials in environmental analysis field.

A safe and robust dual-network hydrogel electrolyte coupled with multi-heteroatom doped carbon nanosheets for flexible quasi-solid-state zinc ion hybrid supercapacitors

Aqueous zinc ion hybrid supercapacitors (ZHSCs) are receiving increasing research interest because of their superiority in safety, economy, and high water compatibility. However, the corrosion problems coupled with dendrite growth in an aqueous system severely limit the potential use of zinc storage systems with long service life. To delicately address the above obstacles, a κ-carrageenan/polyacrylamide/Zn(CF₃SO₃)₂ hydrogel electrolyte (denoted as κ-CG/PAAm/Zn(CF₃SO₃)₂) with an ionically and covalently double crosslinked network was constructed, which possesses a high ionic conductivity of 2.3 S m^-1, a high tensile strength of 34.6 kPa with a superior stretchability of 599.0%, and an excellent compression strength of 75.3 kPa at 75.0% strain. The double crosslinked polymer chains realize uniform zinc deposition. In addition, the intrinsic hydrophilic groups in the κ-carrageenan (κ-CG) and polyacrylamide (PAAm) chains can well immobilize water molecules, which favor electrolyte ion transport. Moreover, nitrogen and sulphur co-doped carbon nanosheets (denoted as ACNS) characterized by the rich amorphous phase associated with lots of short-range ordered microcrystalline regions were prepared as the cathode material in this work, which exhibits a high capacity of 116.4 mA h g^-1 coupled with superior rate performance and long-term cycling stability (108.0% capacity retention over 10 000 cycles) for an aqueous Zn//ACNS ZHSC. A quasi-solid-state ZHSC based on ACNS and κ-CG/PAAm/Zn(CF₃SO₃)₂ exhibits a specific capacity of 100.5 mA h g^-1 at 0.25 A g^-1 with a high capacity retention of 50.8% at 20 A g^-1. The as-fabricated ZHSC also shows excellent cycling stability of 10 000 cycles as well as a superior energy density of 86.5 W h kg^-1 at a power density of 215.3 W kg^-1. The ZHSC can also be used as a reliable source to drive various kinds of electronics (e.g., mobile phones and electronic timers), which uncovers a feasible strategy for engineering the high-performance hydrogel electrolytes and cathode materials for ZHSC applications.

Designing and Understanding the Outstanding Tri-Iodide Reduction of N-Coordinated Magnetic Metal Modified Defect-Rich Carbon Dodecahedrons in Photovoltaics

Nitrogen-coordinated metal-modified carbon is regarded as a novel frontier electrocatalyst in energy conversion devices. However, the construction of intrinsic defects in a carbon matrix remains a great challenge. Herein, N-coordinated magnetic metal (Fe, Co) modified porous carbon dodecahedrons (Fe/Co-NPCD) with a large surface area, rich intrinsic defects, and evenly distributed metal-N_x species are successfully synthesized via the rational design of iron precursor and the bimetallic-organic frameworks. Because of a synergistic effect between N-coordinated dual magnetic metal active sites, the Fe/Co-NPCD exhibits exceptional electrocatalytic activity and electrochemical stability. A solar cell fabricates with the Fe/Co-NPCD yields an impressive power conversion efficiency of 8.35% in dye-sensitized solar cells, superior to that of mono-metal-doped carbon-based cells and conventional Pt-based cells. Furthermore, density functional theory calculations illustrate that Fe, Co, and N doping are in favor of improving the adsorption capacity of the catalyst for I₃ ^- species by optimizing the magnetic momentum between the magnetic metal atoms, thereby upgrading its catalytic activity. This work develops a general strategy for synthesizing a high-performance defect-rich carbon-based catalyst, and offers valuable insight into the role of magnetic metals in catalysis, which can be used to guide the design of high-performance catalysts in the energy field.

Homogeneous Distribution of Pt16(C4O4SH5)26 Clusters in ZIF-67 for Efficient Hydrogen Generation and Oxygen Reduction

In recent years, based on the high catalytic activities of metal nanoclusters (MNCs) and the unique porous structure of metal-organic frameworks (MOFs), much work has focused on MOF-confined small MNCs for catalysis applications. However, the commonly used "ship-in-boat" approach is unfeasible for precisely controlling the size and composition of the formed MNCs and meanwhile often causes structural distortion/degradation. On the other hand, the "bottle-around-ship" method usually has the disadvantages that MOFs show uncontrollable self-nucleation outside the MNCs and the stabilizers on the surface of MNCs may greatly reduce their catalytic activities. In this work, monodispersed Pt₁₆(C₄O₄SH₅)₂₆ clusters (Pt₁₆(MSA)₂₆) were first prepared and used as a precursor for the synthesis of Pt(MSA)@ZIF-67 via the typical Co-carboxylate type of linkage at the interface under ambient atmosphere. After encapsulating the Pt clusters in ZIF-67, the protecting ligands were removed under 300 °C to get surface-clean Pt₁₆ clusters confined in ZIF-67 (Pt@ZIF-67). The obtained Pt@ZIF-67 exhibited high catalytic activity for the hydrolysis of ammonia borane that was superior to that of most of the reported noble-metal catalysts. Meanwhile, by annealing the Pt(MSA)@ZIF-67 at 800 °C to form highly conductive graphitic carbon-coated Pt NCs and Co nanoparticles (NPs) (Pt/Co@NC), the obtained composite showed high catalytic activity for the oxygen reduction reaction (ORR). The formed Pt/Co@NC showed 9.6 times higher ORR mass activity (at 0.8 V) than Pt/C. This work provides a strategy to fabricate highly dispersed and stable metal clusters confined in the porous matrix for catalysis and shows that highly porous MOFs have promising catalysis applications by combining them with other active components.

Investigation of the mechanism of small size effect in carbon-based supercapacitors

A small size effect could be conducive to enhancing the electrochemical performance, while the mechanism by which they also increase the capacitance for carbon electrode materials has not been established. Here, ultrasmall polyacrylonitrile particles with controllable sizes are supported on poly(ionic liquid)s microspheres (PILMs/PAN) by epitaxial polymerization growth strategy. Unlike traditional subtraction formulas in developing a porous architecture, we report on the synthesis of creating numerous micro/mesopores in carbon materials by addition theorem, and thus making for the perfection of packing density, which has not been reported yet. As an example, PILMC/PAN-L with a well-balanced specific surface area of 875.38 m² g^-1 and packing density of 1.05 g cm^-3 demonstrated gravimetric and volumetric capacitances of 309 F g^-1 and 324.45 F cm^-3 at 0.5 A g^-1, showing good rate performance and stable cyclability. Moreover, the underlying mechanism is thoroughly developed using multiple electrochemical methods. On this basis, this work would afford avenues to further enhancing the electrochemical performance, especially in exploring advanced carbon materials.

Colorimetric detection of chlorpyrifos in peach based on cobalt-graphene nanohybrid with excellent oxidase-like activity and reusability

Cobalt nanocrystal has been widely used as nano-enzyme for sensing and catalysis due to its high stability and low cost, but poor catalytic activity limits its applications in bioanalysis. The study reports one strategy for synthesis of cobalt-graphene nanohybrid. Histidine-functionalized graphene quantum dot (His-GQD) was bound to graphene sheet via π-π stacking and then combined with cobalt ions in the presence of cetyltrimethylammonium chloride to form stable complex and finally reduced under nitrogen to obtain Co-His-GQD-G. The as-synthesized nanohybrid offers well-defined three-dimensional structure and quasi-superparamagnetism. The cobalt nanoparticles were well dispersed on graphene sheets. The unique structure improves oxidase-like activity of Co-His-GQD-G. Further, Co-His-GQD-G was used as the nanozyme for colorimetric detection of chlorpyrifos. Co-His-GQD-G catalyzes oxidization of 3,3',5,5'-tetramethylbenzidine into blue product. Thiocholine produced by hydrolysis of acetylthiocholine under catalysis of acetylcholinesterase inhibits catalytic activity of Co-His-GQD-G and leads to a reduced oxidization rate. Chlorpyrifos inhibits activity of acetylcholinesterase and brings an enhanced absorbance of blue product. The absorbance at 652 nm linearly increases with increasing chlorpyrifos concentration in the range of 2-20 ng mL^-1 with detection limit of 0.57 ng mL^-1 (S/N = 3). The method was successfully applied in determination of chlorpyrifos in peach by preparing Co-His-GQD-G magnetic gel sheet.