Ultrafast Delamination of Graphite into High-Quality Graphene Using Alternating Currents

Upscaling Brønsted acid intercalation and exfoliation of graphite into graphene by polyoxometalate clusters for sodium-ion battery application

Non-oxidative intercalation of graphite avoids damage to graphene lattices and is a suitable method to produce high-quality graphene. However, the yield of exfoliated graphene is low in this process due to the poor delamination efficiency of guest species. In this study, a Brønsted acid intercalation protocol is developed involving polyoxometalate (POM) clusters (H6P2W18O62) as guests and intercalation of graphite is realized at the sub-nanometer scale. Theoretical simulation based on DFT elucidates the stepwise intercalation mechanism of Brønsted acid molecules and clusters. Unlike common molecules/ionic guests, intercalation of POM clusters induces large expansion and extensive donor-acceptor interactions among graphite interlayers. This significantly weakens the van der Waals forces and promotes exfoliation efficiency of graphene layers. The exfoliated graphene possesses outstanding features of large lateral size, thin thickness, and high purity, and shows excellent performance as the anode for high power sodium-ion batteries. This work proffers a new pathway toward non-oxidative intercalation of graphite for large-scale production of graphene.

Scalable Synthesis of Bilayer Graphene at Ambient Temperature

In this work, we develop for the first time a facile chemical lithiation-assisted exfoliation approach to the controllable and scalable preparation of bilayer graphene. Biphenyl lithium (Bp-Li), a strong reducing reagent, is selected to realize the spontaneous Li-intercalation into graphite at ambient temperature, forming lithium graphite intercalation compounds (Li-GICs). The potential of Bp-Li (0.11 V vs Li/Li+), which is just lower than the potential of stage-2 lithium intercalation (0.125 V), enables the precise lithiation of graphite to stage-2 Li-GICs (LiC12). Intriguingly, the exfoliation of LiC12 leads to the bilayer-favored production of graphene, giving a high selectivity of 78%. Furthermore, the mild intercalation-exfoliation procedure yields high-quality graphene with negligible structural deterioration. The obtained graphene exhibits ultralow defect density (ID/IG ∼ 0.14) and a considerably high C/O ratio (∼29.7), superior to most current state-of-the-art techniques. This simple and scalable strategy promotes the understanding of chemical Li-intercalation methods for preparing high-quality graphene and shows great potential for layer-controlled engineering.

Ultrafast alternating-current exfoliation toward large-scale synthesis of graphene and its application for flexible supercapacitors

To facilitate the transition of laboratory research to industrial applications, it is critical to establish a reliable protocol for the mass synthesis of high-quality graphene. Here, we present an efficient electrochemical intercalation-based exfoliation approach utilizing alternating current that allows for the production of sub-kilogram quantities of graphene. This strategy involves repeatedly intercalating foreign anions and cations into the interlayer gaps of dual-graphite electrodes, accelerating the graphite expansion process and maximizing the exfoliation efficiency of both electrodes while inhibiting excessive anodic oxidation. The exfoliation process leads to high-yield graphene nanosheets (92 %, primarily 1-3 layers) with minimal structural deterioration (ID/IG ratio of 0.05), high purity (2.1 at% oxygen), and outstanding electrical property (7.28 × 104 S m-1). Notably, our scaled-up manufacturing technique produces a record-breaking throughput of 135 g h-1, improving on the best-reported exfoliation efficiency with direct current by 35%. Furthermore, the as-made graphene demonstrates a large reversible capacity of 102 mF cm-2 for flexible supercapacitors, with robust cyclability with 99.5% after 10,000 cycles, excellent mechanical flexibility, and exceptional serial integration for adjustable voltage output. The efficient and scalable method presents a significant advancement in the large-scale manufacture of graphene, with potential for widespread industrial applications.

Nitrogen-Doped Graphene Materials with High Electrical Conductivity Produced by Electrochemical Exfoliation of Graphite Foil

Nitrogen-doped graphene-based materials are of utmost importance in sensing and energy conversion devices due to their unique physicochemical properties. However, the presence of defects such as pyrrolic nitrogen and oxygenated functional groups reduces their electrical conductivity. Herein, a two-step approach based on the electrochemical exfoliation of graphite foils in aqueous mixed electrolytes followed by thermal reduction at 900 °C is used to prepare high-quality few layers of N-doped graphene-based materials. The exfoliations were conducted in 0.1 M (NH4)2SO4 or H2SO4 and HNO3 (5 mM or 0.1 M) electrolytes mixtures and the HNO3 vol% varied. Chemical analysis demonstrated that the as-prepared graphene oxides contain nitro and amine groups. Thermal reduction is needed for substitutional N-doping. Nitrogen and oxygen surface concentrations vary between 0.23-0.96% and 3-8%, respectively. Exfoliation in (NH4)2SO4 and/or 5 mM HNO3 favors the formation of pyridinic-N (10-40% of the total N), whereas 1 M HNO3 favors the formation of graphitic-N (≈60%). The electrical conductivity ranges between 166-2705 Scm-1. Raman spectroscopy revealed a low density of defects (ID/IG ratio between 0.1 and 0.7) and that most samples are composed of mono-to-bilayer graphene-based materials (IG/I2D integrated intensities ratio). Structural and compositional stability of selected samples after storage in air for three months is demonstrated. These results confirm the high quality of the synthesized undoped and N-doped graphene-type materials.

Controllable Synthesis of 2D Materials by Electrochemical Exfoliation for Energy Storage and Conversion Application

2D materials have captured much recent research interest in a broad range of areas, including electronics, biology, sensors, energy storage, and others. In particular, preparing 2D nanosheets with high quality and high yield is crucial for the important applications in energy storage and conversion. Compared with other prevailing synthetic strategies, the electrochemical exfoliation of layered starting materials is regarded as one of the most promising and convenient methods for the large-scale production of uniform 2D nanosheets. Here, recent developments in electrochemical delamination are reviewed, including protocols, categories, principles, and operating conditions. State-of-the-art methods for obtaining 2D materials with small numbers of layers-including graphene, black phosphorene, transition metal dichalcogenides and MXene-are also summarized and discussed in detail. The applications of electrochemically exfoliated 2D materials in energy storage and conversion are systematically reviewed. Drawing upon current progress, perspectives on emerging trends, existing challenges, and future research directions of electrochemical delamination are also offered.

Embedded ultra-high stability flexible transparent conductive films based on exfoliated graphene-silver nanowires-colorless polyimide

Transparent conductive films with high stability were prepared by embedding silver nanowires in colorless polyimide and adding a protective layer of exfoliated graphene. The films exhibit great light transmission and conductivity with a sheet resistance of 22 Ω sq^-1at transmittance of 83%. Due to its special embedded structure, the conductive layer can withstand several peeling experiments without falling off. In addition, the most outstanding advantage is the ultra-high stability of the films, including high mechanical robustness, strong chemical corrosion resistance and high operating voltage capacity. The organic light-emitting diode devices prepared based on this transparent conductive electrode exhibit comparable efficiency to indium tin oxide (ITO) based devices, withC.E._max= 2.78 cd A^-1,P^-1.E._max= 1.89 lm W^-1,EQE_max= 0.89%. Moreover, the efficiencies were even higher than that of ITO devices when the operating voltage of the device exceeds 5 V. The above performances show that the transparent conductive electrode based on this structure has high potential for application in organic electronic devices.

All-Solution-Processed Van der Waals Heterostructures for Wafer-Scale Electronics

2D van der Waals (vdW) materials have been considered as potential building blocks for use in fundamental elements of electronic and optoelectronic devices, such as electrodes, channels, and dielectrics, because of their diverse and remarkable electrical properties. Furthermore, two or more building blocks of different electronic types can be stacked vertically to generate vdW heterostructures with desired electrical behaviors. However, such fundamental approaches cannot directly be applied practically because of issues such as precise alignment/positioning and large-quantity material production. Here, these limitations are overcome and wafer-scale vdW heterostructures are demonstrated by exploiting the lateral and vertical assembly of solution-processed 2D vdW materials. The high exfoliation yield of the molecular intercalation-assisted approach enables the production of micrometer-sized nanosheets in large quantities and its lateral assembly in a wafer-scale via vdW interactions. Subsequently, the laterally assembled vdW thin-films are vertically assembled to demonstrate various electronic device applications, such as transistors and photodetectors. Furthermore, multidimensional vdW heterostructures are demonstrated by integrating 1D carbon nanotubes as a p-type semiconductor to fabricate p-n diodes and complementary logic gates. Finally, electronic devices are fabricated via inkjet printing as a lithography-free manner based on the stable nanomaterial dispersions.

Application of reduced graphene oxide as the hole transport layer in organic solar cells synthesized from waste dry cells using the electrochemical exfoliation method

The hole transport layer (HTL) plays an important role in improving the efficiency and stability of organic solar cells (OSCs).

High-Yield Exfoliation of Monolayer 1T'-MoTe2 as Saturable Absorber for Ultrafast Photonics

Liquid-phase exfoliation can be developed for the large-scale production of two-dimensional materials for photonic applications. Although atomically thin 2D transition metal dichalcogenides (TMDs) show enhanced nonlinear optical properties or photoluminescence quantum yield relative to the bulk phase, these properties are weak in the absolute sense due to the ultrashort optical path, and they are also sensitive to layer-dependent symmetry properties. Another practical issue is that the chemical stability of some TMDs (e.g., Weyl semimetals) decreases dramatically as the thickness scales down to monolayer, precluding application as optical components in air. To address these issues, a way of exfoliating TMDs that ensures instantaneous passivation needs to be developed. Here, we employed a polymer-assisted electrochemical exfoliation strategy to synthesize PVP-passivated TMDs monolayers that could be spin coated and restacked into organic-inorganic superlattices with well-defined X-ray diffraction patterns. The segregation of restacked TMDs (e.g., MoS₂) by PVP allows the inversion asymmetry of individual layers to be maintained in these superlattices, which allows second harmonic generation and photoluminescence to be linearly scaled with thickness. PVP-passivated monolayer 1T'-MoTe₂ saturable absorber fabricated from these flakes exhibits fast response and recovery time (<150 fs) and pulse stability. Continuous-wave mode-locking based on 1T'-MoTe₂ saturable absorber in a fiber ring laser cavity has been realized, attaining a fundamental repetition rate of 3.15 MHz and pulse duration as short as 867 fs at 1563 nm.

Solution-processed two-dimensional materials for next-generation photovoltaics

In the ever-increasing energy demand scenario, the development of novel photovoltaic (PV) technologies is considered to be one of the key solutions to fulfil the energy request. In this context, graphene and related two-dimensional (2D) materials (GRMs), including nonlayered 2D materials and 2D perovskites, as well as their hybrid systems, are emerging as promising candidates to drive innovation in PV technologies. The mechanical, thermal, and optoelectronic properties of GRMs can be exploited in different active components of solar cells to design next-generation devices. These components include front (transparent) and back conductive electrodes, charge transporting layers, and interconnecting/recombination layers, as well as photoactive layers. The production and processing of GRMs in the liquid phase, coupled with the ability to "on-demand" tune their optoelectronic properties exploiting wet-chemical functionalization, enable their effective integration in advanced PV devices through scalable, reliable, and inexpensive printing/coating processes. Herein, we review the progresses in the use of solution-processed 2D materials in organic solar cells, dye-sensitized solar cells, perovskite solar cells, quantum dot solar cells, and organic-inorganic hybrid solar cells, as well as in tandem systems. We first provide a brief introduction on the properties of 2D materials and their production methods by solution-processing routes. Then, we discuss the functionality of 2D materials for electrodes, photoactive layer components/additives, charge transporting layers, and interconnecting layers through figures of merit, which allow the performance of solar cells to be determined and compared with the state-of-the-art values. We finally outline the roadmap for the further exploitation of solution-processed 2D materials to boost the performance of PV devices.

Scalable one-step production of electrochemically exfoliated graphene decorated with transition metal oxides for high-performance supercapacitors

Graphene and related materials have been widely studied due to their superior properties in a wide range of applications. However, large-scale production remains a critical challenge to enable commercial acceptance. Here, we present a facile, scalable, one-step electrochemical method for producing hybrid transition metal oxide (V, Fe, Ti, or Mn)/graphene materials (TMO-EGs) as active materials for supercapacitors. Therein, we have designed and developed a continuous flow reactor with a high production rate (>4 g h^-1) of TMO-EGs, where the TMO accounts for 36 weight%. TMO-EG flakes demonstrate a moderate lateral size of up to 5 μm and a specific surface area of 64 m² g^-1. Notably, TMO-EGs present a capacitance of up to 188 F g^-1 as single electrodes in 4 M LiCl. The most promising material, MnO_x-EG, has been used for the large-scale production of thin-film supercapacitor devices (40 × 40 × 0.25 mm) in a commercial pilot line. Using 1 M Na₂SO₄ as the electrolyte, the as-fabricated devices deliver a capacitance of 52 mF cm^-2, with 83% capacitance retention after 6000 charge-discharge cycles, comparable to recent reports of similar devices. The simplicity, scalability, and versatility of our method are highly promising to promote the commercial applications of graphene-based materials and can be further developed for the upscalable production of other 2D materials, such as transition metal dichalcogenides and MXenes.

Methods of hexagonal boron nitride exfoliation and its functionalization: covalent and non-covalent approaches

The exfoliation of two-dimensional (2D) hexagonal boron nitride nanosheets (h-BNNSs) from bulk hexagonal boron nitride (h-BN) materials has received intense interest owing to their fascinating physical, chemical, and biological properties. Numerous exfoliation techniques offer scalable approaches for harvesting single-layer or few-layer h-BNNSs. Their structure is very comparable to graphite, and they have numerous significant applications owing to their superb thermal, electrical, optical, and mechanical performance. Exfoliation from bulk stacked h-BN is the most cost-effective way to obtain large quantities of few layer h-BN. Herein, numerous methods have been discussed to achieve the exfoliation of h-BN, each with advantages and disadvantages. Herein, we describe the existing exfoliation methods used to fabricate single-layer materials. Besides exfoliation methods, various functionalization methods, such as covalent, non-covalent, and Lewis acid-base approaches, including physical and chemical methods, are extensively described for the preparation of several h-BNNS derivatives. Moreover, the unique and potent characteristics of functionalized h-BNNSs, like enhanced solubility in water, improved thermal conductivity, stability, and excellent biocompatibility, lead to certain extensive applications in the areas of biomedical science, electronics, novel polymeric composites, and UV photodetectors, and these are also highlighted.

Layered Intercalation Materials

2D layered materials typically feature strong in-plane covalent chemical bonding within each atomic layer and weak out-of-plane van der Waals (vdW) interactions between adjacent layers. The non-bonding nature between neighboring layers naturally results in a vdW gap, in which various foreign species may be inserted without breaking the in-plane covalent bonds. By tailoring the composition, size, structure, and electronic properties of the intercalated guest species and the hosting layered materials, an expansive family of layered intercalation materials may be produced with highly variable compositional and structural features as well as widely tunable physical/chemical properties, invoking unprecedented opportunities in fundamental studies of property modulation and potential applications in diverse technologies, including electronics, optics, superconductors, thermoelectrics, catalysis, and energy storage. Here, the principles and protocols for various intercalation methods, including wet chemical intercalation, gas-phase intercalation, electrochemical intercalation, and ion-exchange intercalation, are comprehensively reviewed and how the intercalated species alter the crystal structure and the interlayer coupling of the host 2D layered materials, introducing unusual physical and chemical properties and enabling devices with superior performance or unique functions, is discussed. To conclude, a brief summary on future research opportunities and emerging challenges in the layered intercalation materials is given.

Ultra-Fast, Chemical-Free, Mass Production of High Quality Exfoliated Graphene

As graphene penetrates into industries, it is essential to mass produce high quality graphene sheets. New discoveries face formidable challenges in the marketplace due to the lack of proficient protocols to produce graphene on a commercial scale while maintaining its quality. Here, we present a conspicuous protocol for ultrafast exfoliation of graphite into high quality graphene on the sub-kilogram scale without the use of any intercalants, chemicals, or solvent. We show that graphite can be exfoliated using a plasma spray technique with high single-layer selectivity (∼85%) at a very high production rate (48 g/h). This is possible because of the inherent characteristics of the protocol which provides sudden thermal shock followed by two-stage shear. The exfoliated graphene shows almost no basal defect (I_d/I_g: 0) and possesses high quality (C/O ratio: 21.2, sp² %: ∼95%), an indication of negligible structural deterioration. The results were reproducible indicating the adeptness of the protocol. We provided several proofs-of-concept of plasma spray exfoliated graphene to demonstrate its utility in applications such as mechanical reinforcements; frictionless, transparent conductive coatings; and energy storage devices.

Electrochemical Delamination of Ultralarge Few-Layer Black Phosphorus with a Hydrogen-Free Intercalation Mechanism

Due to strong interlayer interaction and ease of oxidation issues of black phosphorus (BP), the domain size of artificial synthesized few-layer black phosphorus (FL-BP) crystals is often below 10 µm, which extremely limits its further applications in large-area thin-film devices and integrated circuits. Herein, a hydrogen-free electrochemical delamination strategy through weak Lewis acid intercalation enabled exfoliation is developed to produce ultralarge FL-BP single-crystalline domains with high quality. The interaction between the weak Lewis acid tetra-n-butylammonium acetate (CH₃ COOTBA) and P atoms promotes the average domain size of FL-BP crystal up to 77.6 ± 15.0 µm and the largest domain size is found to be as large as 119 µm. The presence of H⁺ and H₂ O is found to sharply decrease the size of as-exfoliated FL-BP flakes. The electronic transport measurements show that the delaminated FL-BP crystals exhibit a high hole mobility of 76 cm² V^-1 s^-1 and an on/off ratio of 10³ at 298 K. A broadband photoresponse from 532 to 1850 nm with ultrahigh responsivity is achieved. This work provides a scalable, simple, and low-cost approach for large-area BP films that meet industrial requirements for nanodevices applications.

Carbon materials for ion-intercalation involved rechargeable battery technologies

The development of carbon electrode materials for rechargeable batteries is reviewed from the perspective of structural features, electrochemistry, and devices.

Boosting Capacitive Sodium-Ion Storage in Electrochemically Exfoliated Graphite for Sodium-Ion Capacitors

Sodium (Na)-ion capacitors possess higher energy density than supercapacitors and higher power density than Na-ion batteries. However, kinetic mismatches between fast capacitive charge storage on the cathode and sluggish battery-type reactions on the anode lead to a poor charge/discharge rate capability and insufficient power output of Na-ion capacitors. Thus, developing suitable anode materials for Na-ion capacitors is urgently desirable. This work demonstrates an electrochemically exfoliated graphite (EEG) anode with enhanced capacitive charge storage, greatly boosting the Na-ion reaction kinetics of co-intercalation. The EEG anode shows a high reversible capacity of 109 mAh g^-1 and maintains a good capacity retention of 90% after 1000 cycles. The assembled Na-ion capacitor using the EEG anode can finish the charge/discharge process in less than 10 s, which achieves an ultrahigh power density of 17,500 W kg^-1 with an energy density of 17 Wh kg^-1. The high capacitive contributions at both the anode and cathode contribute to the fast rate capability and high power output of the fabricated Na-ion capacitors. This work will promote the development of ultrafast charging sodium-ion storage devices.

Preparation of Few-Layer Porous Graphene by a Soft Mechanical Method with a Short Rolling Transfer Process

Few-layer porous graphene is a promising material for a variety of fields. However, the synthesis of few-layer porous graphene is a great challenge. Here we report a feasible green path to produce few-layer porous graphene, which was exfoliated from high-pressure graphite balls onto microspheres with rough surfaces by a mild rolling transfer process. Ordinary ball milling equipment was adopted for the low-speed (100 rpm) ball-microsphere rolling transfer process. The rolling time (<10 min) was controlled to obtain porous graphene instead of graphene. The porous graphene on the exfoliating microspheres was then easily dispersed in solution by bath sonication. The product contains very few impure functional groups. The hole size and layer distribution of the few-layer porous graphene have been demonstrated to be 2.37±1.17 nm and 2.4±0.7 layers, respectively, and can be adjusted by redesigning the surface of the microspheres.

Production of Quasi-2D Platelets of Nonlayered Iron Pyrite (FeS2) by Liquid-Phase Exfoliation for High Performance Battery Electrodes

Over the past 15 years, two-dimensional (2D) materials have been studied and exploited for many applications. In many cases, 2D materials are formed by the exfoliation of layered crystals such as transition-metal disulfides. However, it has recently become clear that it is possible to exfoliate nonlayered materials so long as they have a nonisotropic bonding arrangement. Here, we report the synthesis of 2D-platelets from the earth-abundant, nonlayered metal sulfide, iron pyrite (FeS₂), using liquid-phase exfoliation. The resultant 2D platelets exhibit the same crystal structure as bulk pyrite but are surface passivated with a density of 14 × 10¹⁸ groups/m². They form stable suspensions in common solvents and can be size-selected and liquid processed. Although the platelets have relatively low aspect ratios (∼5), this is in line with the anisotropic cleavage energy of bulk FeS₂. We observe size-dependent changes to optical properties leading to spectroscopic metrics that can be used to estimate the dimensions of platelets. These platelets can be used to produce lithium ion battery anodes with capacities approaching 1000 mAh/g.

Ultrasound-assisted Li+/Na+ co-intercalated exfoliation of graphite into few-layer graphene

In this work, we developed a novel approach for few-layer graphene by employing Li⁺/Na⁺ co-intercalated exfoliation assisted by ultrasound method. The experiments were conducted under the ultrasonic power of 300 W and the frequency of 40 kHz without the participation of any organic solvent. The effect of Li⁺/Na⁺ proportion on the exfoliation of graphite was intensively investigated. The structure and morphology of the as-exfoliated graphene nanosheets (UGN) was determined by a series of characterizations. The results showed that the thicknesses of the as-exfoliated graphene nanosheets were about 2.38-2.56 nm (about 7-8 layers) at the optimal Li⁺/Na⁺ ratio. The potential application of the as-exfoliated graphene nanosheets as additive in grease was evaluated by four-ball friction tester. The results demonstrated that the antifriction and antiwear performances of the grease with 0.06 wt% graphene were significantly improved by 21.35% and 30.32% relative to pure grease, respectively. The friction mechanism was proposed by detecting the worn surfaces.

A general Lewis acidic etching route for preparing MXenes with enhanced electrochemical performance in non-aqueous electrolyte

Two-dimensional carbides and nitrides of transition metals, known as MXenes, are a fast-growing family of materials that have attracted attention as energy storage materials. MXenes are mainly prepared from Al-containing MAX phases (where A = Al) by Al dissolution in F-containing solution; most other MAX phases have not been explored. Here a redox-controlled A-site etching of MAX phases in Lewis acidic melts is proposed and validated by the synthesis of various MXenes from unconventional MAX-phase precursors with A elements Si, Zn and Ga. A negative electrode of Ti₃C₂ MXene material obtained through this molten salt synthesis method delivers a Li⁺ storage capacity of up to 738 C g^-1 (205 mAh g^-1) with high charge-discharge rate and a pseudocapacitive-like electrochemical signature in 1 M LiPF₆ carbonate-based electrolyte. MXenes prepared via this molten salt synthesis route may prove suitable for use as high-rate negative-electrode materials for electrochemical energy storage applications.

Highly Effective Electrochemical Exfoliation of Ultrathin Tantalum Disulfide Nanosheets for Energy-Efficient Hydrogen Evolution Electrocatalysis

Developing highly efficient transition metal dichalcogenide electrocatalysts would be significantly beneficial for the electrocatalytic hydrogen evolution reaction (HER) from water splitting. Herein, we reported novel ultrathin tantalum disulfide nanosheets (TaS₂ NSs) prepared by electrochemically exfoliating bulk TaS₂ with an alternating voltage in an acidic electrolyte. The obtained TaS₂ NS electrocatalyst possessed an ultrathin structure with a lateral size of 2 μm and a thickness of ∼3 nm. Owing to the unique 2D structure, the achieved TaS₂ NSs displayed remarkable electrocatalytic activity toward the HER by a small overpotential of 197 mV at 10 mA cm^-2 and a small Tafel slope of 100 mV dec^-1 in acidic solution, much lower than those of TaS₂ (>547 mV and 216 mV dec^-1, respectively) and other reported TaS₂-based HER electrocatalysts. Furthermore, highly efficient full water splitting could be realized with two electrodes in which TaS₂ NSs acted as the cathode while Ir/C served as the anode, with help of two AA size batteries or solar cells. By replacing the oxygen evolution reaction with the urea oxidation reaction (UOR), bifunctional TaS₂ NSs enabled an energy-effective HER process in the cathode and UOR process in the anode with decreased applied potential.

Emerging 2D Materials Produced via Electrochemistry

2D materials are important building blocks for the upcoming generation of nanostructured electronics and multifunctional devices due to their distinct chemical and physical characteristics. To this end, large-scale production of 2D materials with high purity or with specific functionalities represents a key to advancing fundamental studies as well as industrial applications. Among the state-of-the-art synthetic protocols, electrochemical exfoliation of layered materials is a very promising approach that offers high yield, great efficiency, low cost, simple instrumentation, and excellent up-scalability. Remarkably, playing with electrochemical parameters not only enables tunable material properties but also increases the material diversities from graphene to a wide spectrum of 2D semiconductors. Here, a succinct and critical survey of the recent progress in this research direction is presented, comprising the strategic design, exfoliation principles, underlying mechanisms, processing techniques, and potential applications of 2D materials. At the end of the discussion, the emerging trends, challenges, and opportunities in real practice are also highlighted.

Coordinating capillary infiltration with anodic oxidation: a multi-functional strategy for electrochemical fabrication of graphene

Coordinating the capillarity infiltration with anodic oxidation enables electrochemical fabrication of various graphene materials at different temperatures.

2D Crystal-Based Fibers: Status and Challenges

2D crystals are emerging new materials in multidisciplinary fields including condensed state physics, electronics, energy, environmental engineering, and biomedicine. To employ 2D crystals for practical applications, these nanoscale crystals need to be processed into macroscale materials, such as suspensions, fibers, films, and 3D macrostructures. Among these macromaterials, fibers are flexible, knittable, and easy to use, which can fully reflect the advantages of the structure and properties of 2D crystals. Therefore, the fabrication and application of 2D crystal-based fibers is of great importance for expanding the impact of 2D crystals. In this Review, 2D crystals that are successfully prepared are overviewed based on their composition of elements. Subsequently, methods for preparing 2D crystals, 2D crystals dispersions, and 2D crystal-based fibers are systematically introduced. Then, the applications of 2D crystal-based fibers, such as flexible electronic devices, high-efficiency catalysis, and adsorption, are also discussed. Finally, the status-of-quo, perspectives, and future challenges of 2D crystal-based fibers are summarized. This Review provides directions and guidelines for developing new 2D crystal-based fibers and exploring their potentials in the fields of smart wearable devices.

Temperature Effects on the HOPG Intercalation Process

Graphite intercalation via chemical strategies is a common procedure to delaminate stratified crystals and obtain a suspension of graphene flakes. The intercalation mechanism at the molecular level is still under investigation in view of enhancing graphene production and reducing damage to the original pristine crystal. The latter, in particular, can undergo surface detriment due to both blister evolution and carbon dissolution. The role of the electrolyte temperature in this process has never been investigated. Here, by using an in-situ atomic force microscopy (AFM) apparatus, we explore surface morphology changes after the application of fast cyclic-voltammetries at 343 K, in view of de-coupling the crystal swelling phenomenon from the other electrochemical processes. We find that blisters do not evolve as a consequence of the increasing temperature, while the quality of the graphite surface becomes significantly worse, due to the formation of some adsorbates on possible defect sites of the electrode surface. Our results suggest that the chemical baths used in graphite delamination must be carefully monitored in temperature for avoiding undesired electrode detriment.

Initial Studies Directed toward the Rational Design of Aqueous Graphene Dispersants

This study presents preliminary experimental data suggesting that sodium 4-(pyrene-1-yl)butane-1-sulfonate (PBSA), 5, an analogue of sodium pyrene-1-sulfonate (PSA), 1, enhances the stability of aqueous reduced graphene oxide (RGO) graphene dispersions. We find that RGO and exfoliated graphene dispersions prepared in the presence of 5 are approximately double the concentration of those made with commercially available PSA, 1. Quantum mechanical and molecular dynamics simulations provide key insights into the behavior of these molecules on the graphene surface. The seemingly obvious introduction of a polar sulfonate head group linked via an appropriate alkyl spacer to the aromatic core results in both more efficient binding of 5 to the graphene surface and more efficient solvation of the polar head group by bulk solvent (water). Overall, this improves the stabilization of the graphene flakes by disfavoring dissociation of the stabilizer from the graphene surface and inhibiting reaggregation by electrostatic and steric repulsion. These insights are currently the subject of further investigations in an attempt to develop a rational approach to the design of more effective dispersing agents for rGO and graphene in aqueous solution.

3D N-doped carbon framework with embedded CoS nanoparticles as highly active and durable oxygen reduction and evolution electrocatalyst

Development of bifunctional non-metal electrocatalyst for oxygen reduction reactions (ORRs) and oxygen evolution reactions (OERs) with high efficiency, durable stability and low cost is a crucial and challenging issue. However, the heteroatom-doped carbon material including a carbon-based conductive additive would be easily oxidized under the high potential needed for driving the OER. Besides, the interaction between the heteroatom-doped carbon material that possesses electrocatalyst activity and a carbon-based conductive additive is weak, affecting the performance of the electrocatalyst. In this context, we introduce CoS nanoparticles into a three-dimensional N-doped carbon framework (CoS/NCF) by a morphology-retaining pyrolysis of polyaniline/CoS framework precursor, in which the polyaniline framework provides abundant functional groups to nucleate and grow CoS nanoparticles while retaining its interconnected three-dimensional porous structure. Benefiting from (i) the lower OER potential of CoS nanoparticles than the electro-oxidation decomposition potential of a carbon material and (ii) the strong affinity of CoS nanoparticles for a N-doped carbon framework, higher stability than commercial Pt/C system and greater catalytic activity towards ORR with an onset potential of about 0.921 V versus reversible hydrogen electrode (RHE) are observed. Furthermore, only a potential of 1.515 V versus RHE is required for achieving a current density of 10 mA cm^-2.

Fluoride-Free Synthesis of Two-Dimensional Titanium Carbide (MXene) Using A Binary Aqueous System

Two-dimensional (2D) titanium carbide (Ti₃ C₂ ) is emerging as an important member of the MXene family. However, fluoride-based synthetic procedures remain an impediment to the practical applications of this promising class of materials. Here we demonstrate an efficient fluoride-free etching method based on the anodic corrosion of titanium aluminium carbide (Ti₃ AlC₂ ) in a binary aqueous electrolyte. The dissolution of aluminium followed by in situ intercalation of ammonium hydroxide results in the extraction of carbide flakes (Ti₃ C₂ T_x , T=O, OH) with sizes up to 18.6 μm and high yield (over 90 %) of mono- and bilayers. All-solid-state supercapacitor based on exfoliated sheets exhibits high areal and volumetric capacitances of 220 mF cm^-2 and 439 F cm^-3 , respectively, at a scan rate of 10 mV s^-1 , superior to those of LiF/HCl-etched MXenes. Our strategy paves a safe way to the scalable synthesis and application of MXene materials.

Large-area few-layer hexagonal boron nitride prepared by quadrupole field aided exfoliation

A quadrupole electric field-mediated exfoliation method is proposed to convert micron-sized hexagonal boron nitride (h-BN) powder into few-layer hexagonal boron nitride nanosheets (h-BNNS). Under optimum conditions (400 Hz, 40 V, 32 μg ml^-1, sodium deoxycholate, TAE medium), the h-BN powders (thickness >200 nm, horizontal scale ∼10 μm) are successfully exfoliated into 0.5-4 nm (1-10 layers) thick h-BNNS with the same horizontal scale. Dynamic laser scattering and atomic force microscope data show that the yield is 47.6% (for the portion with the thickness of 0.5-6 nm), and all of the vertical sizes are reduced to smaller than 18 nm (45 layers).

Two-dimensional materials for miniaturized energy storage devices: from individual devices to smart integrated systems

This review summarizes recent advances, key challenges and perspectives regarding two-dimensional materials for miniaturized energy storage devices.

Dual-Graphene Rechargeable Sodium Battery

Sodium (Na) ion batteries are attracting increasing attention for use in various electrical applications. However, the electrochemical behaviors, particularly the working voltages, of Na ion batteries are substantially lower than those of lithium (Li) ion batteries. Worse, the state-of-the-art Na ion battery cannot meet the demand of miniaturized in modern electronics. Here, we demonstrate that electrochemically exfoliated graphene (EG) nanosheets can reversibly store (PF₆^- ) anions, yielding high charging and discharging voltages of 4.7 and 4.3 V vs. Na⁺ /Na, respectively. The dual-graphene rechargeable Na battery fabricated using EG as both the positive and negative electrodes provided the highest operating voltage among all Na ion full cells reported to date, together with a maximum energy density of 250 Wh kg^-1 . Notably, the dual-graphene rechargeable Na microbattery exhibited an areal capacity of 35 μAh cm^-2 with stable cycling behavior. This study offers an efficient option for the development of novel rechargeable microbatteries with ultra-high operating voltage and high energy density.