High-Pressure NiAs-Type Modification of FeN

High-Pressure Synthesis of a High-Pressure Phase of MnN Having NiAs-Type Structure

A novel high-pressure phase of manganese mononitride, NiAs-type MnN, was successfully synthesized through a pressure-induced phase transition from a tetragonal distorted NaCl-type MnN at pressures above approximately 55 GPa. High-pressure experiments, including starting material preparation, were conducted using a laser-heated diamond anvil cell. This result is the first example of a nitride with a structural phase transition from the distorted NaCl-type to the NiAs-type structure. Upon decompression after the phase transition to NiAs-type structure, the NiAs-type MnN underwent a structural change to the distorted NaCl-type phase, indicating the phase transition was reversible. NiAs-type MnN has a higher density and bulk modulus in comparison to the distorted NaCl-type one. The phase transition pressure of MnN is lower than that of oxides, such as FeO and MnO, which show a structural phase transition from a NaCl-type to a NiAs-type structure. It is suggested that this is due to the lattice distortion caused by antiferromagnetic ordering.

Iron Nitride Thin Films: Growth, Structure, and Properties

The current state-of-the-art in the growth, structure, and physicochemical properties of iron nitride thin films is presented. First, different iron nitride phases are introduced based on their crystallographic structure and the Fe-N phase diagram. Second, preparation methods for thin iron nitride films are described. Next, the structure, electronic, and magnetic properties of the films are discussed. Finally, potential applications of iron nitride films, as well as the challenges to be faced in the field, are highlighted. This Review constitutes a starting point for anyone who would like to conduct research on these fascinating materials, the scientific and technological potential of which has not been fully explored to date.

Examination of a Structural Preference in Quaternary Alkali-Metal (A) Rare-Earth (R) Copper Tellurides by Combining Experimental and Quantum-chemical Means

In the quest for materials addressing the grand challenges of the future, there is a critical need for a broad understanding of their electronic structures because the knowledge of the electronic structure of a given solid allows us to recognize its structural preferences and to rationalize its properties. As previous research on quaternary chalcogenides containing active metals (a group-I- or -II-element), early transition-metals, and late transition-metals indicated that such materials could pose as alluring systems in the developments of thermoelectrics, our impetus was stimulated to probe the suitability of tellurides belonging to the prolific A₃R₄Cu₅Te₁₀-family. In doing so, we first used quantum-chemical techniques to explore the electronic and vibrational properties of representatives crystallizing with different A₃R₄Cu₅Te₁₀ structure types. The outcome of these explorations indicated that the aspects that control the formation of a given type of A₃R₄Cu₅Te₁₀ structure are rather subtle so that transitions between different types of A₃R₄Cu₅Te₁₀ structures could be induced by manipulating the ambient conditions. To probe this prediction, we explored the thermal behavior for the example of one quaternary telluride, that is, Rb₃Er₄Cu₅Te₁₀, and thereby identified a new type of A₃R₄Cu₅Te₁₀ structure. Because understanding the structural features of the A₃R₄Cu₅Te₁₀ family plays an important role in the analyses of the aforementioned explorations, we also present an overview about the structural features and the members of this class of quaternary tellurides. In this connection, we also provide a structural report of four tellurides, that is, K₃Tb₄Cu₅Te₁₀ and Rb₃R₄Cu₅Te₁₀ (R = Tb, Dy, Ho), which have been obtained from high-temperature solid-state reactions for the very first time.

Two-Dimensional Fe8N Nanosheets: Ferromagnets and Nitrogen Diffusion

We perform a first-principles study and identify two intriguing ferromagnets, hollow-Fe₈N (H-Fe₈N) and bridge-Fe₈N (B-Fe₈N) monolayers, by extensive structural searches. Both H-Fe₈N and B-Fe₈N nanosheets are buckled triangular lattices with a similar motif, but they are distinguishable by the positions of N atoms. The magnetic and electronic properties show that H-Fe₈N is a low-spin ferromagnet; in contrast, B-Fe₈N is a high-spin ferromagnet, which originates from the 3d orbital splitting of the Fe atom due to the low/high symmetric crystal field. Surprisingly, two stable Fe₈N monolayers can be transferred to each other by N atom diffusion from the bridge position to the hollow position with the migration energy barrier of 1.5 eV. The energy barrier is affected by introduced Fe defects and rare earth metal dopants. These findings introduce a new tactic to regulate the 2D Fe-nitride monolayers at the atomic scale.

Sr7N2Sn3: a layered antiperovskite-type nitride stannide containing zigzag chains of Sn4 polyanions

Metallic black platelet single crystals of a new ternary compound, Sr7N2Sn3, were obtained by heating Sr and Sn in a Na flux together with NaN3 as a nitrogen source at 1073 K, followed by slow cooling. Single-crystal X-ray analysis revealed that this compound crystallizes in an orthorhombic cell with the cell parameters a = 10.4082(2), b = 18.0737(4), and c = 7.43390(10) Å (space group Pmna, Z = 2), and has a layered (modular) antiperovskite-type structure which could be related to the inverse structure of Ca2Nb2O7 ((Ca2)[Ca2Nb4O14]). Four-membered zigzag [Sn4] chains are situated between slabs comprising four antiperovskite layers cut by the (110) plane of the ideal anitiperovskite structure, and Sr7N2Sn3 can be expressed as [Sn4][Sn2N4Sr14]. Although an electron-precise valence electron distribution according to the formula (Sr2+)14(N3−)4(Sn4−)2([Sn4]8−) is proposed for this ternary compound, yet, there are certain structural peculiarities which cannot be explained by this idealized picture. Therefore, first principles-based means were employed to account for the aforementioned structural features.

Phase Stability of Iron Nitride Fe4N at High Pressure-Pressure-Dependent Evolution of Phase Equilibria in the Fe-N System

Although the general instability of the iron nitride γ'-Fe₄N with respect to other phases at high pressure is well established, the actual type of phase transitions and equilibrium conditions of their occurrence are, as of yet, poorly investigated. In the present study, samples of γ'-Fe₄N and mixtures of α Fe and γ'-Fe₄N powders have been heat-treated at temperatures between 250 and 1000 °C and pressures between 2 and 8 GPa in a multi-anvil press, in order to investigate phase equilibria involving the γ' phase. Samples heat-treated at high-pressure conditions, were quenched, subsequently decompressed, and then analysed ex situ. Microstructure analysis is used to derive implications on the phase transformations during the heat treatments. Further, it is confirmed that the Fe-N phases in the target composition range are quenchable. Thus, phase proportions and chemical composition of the phases, determined from ex situ X-ray diffraction data, allowed conclusions about the phase equilibria at high-pressure conditions. Further, evidence for the low-temperature eutectoid decomposition γ'→α+ε' is presented for the first time. From the observed equilibria, a P-T projection of the univariant equilibria in the Fe-rich portion of the Fe-N system is derived, which features a quadruple point at 5 GPa and 375 °C, above which γ'-Fe₄N is thermodynamically unstable. The experimental work is supplemented by ab initio calculations in order to discuss the relative phase stability and energy landscape in the Fe-N system, from the ground state to conditions accessible in the multi-anvil experiments. It is concluded that γ'-Fe₄N, which is unstable with respect to other phases at 0 K (at any pressure), has to be entropically stabilised in order to occur as stable phase in the system. In view of the frequently reported metastable retention of the γ' phase during room temperature compression experiments, energetic and kinetic aspects of the polymorphic transition γ'⇌ε' are discussed.

Magnetic, Electronic, and Mechanical Properties of Bulk ε-Fe2N Synthesized at High Pressures

We sintered bulk trigonal ε-Fe₂N (space group: P312) with the high-pressure and high-temperature method. Structural refinements by the Rietveld method result in a trigonal unit cell with parameters of a = 4.7767(1) Å and c = 4.4179(3) Å. ε-Fe₂N is ferromagnetic with a Curie temperature of ∼250 K, a saturation magnetization (M _s) value of up to 1.2 μ_B/formula units (f.u.), and comparatively low coercive field. The Vickers hardness was measured, and the results showed that the asymptotic hardness of bulk ε-Fe₂N is about 6.5 GPa with a load of 1000 g. Thermogravimetric (TG) analysis shows that ε-Fe₂N is thermally stable below 670 K. ε-Fe₂N exhibits good metal conductivity, and the electron transport measurements show that the resistivity of it is 172 μΩ cm at room temperature. The theoretical calculations suggest that the conducting states are mainly derive from Fe-3d states.

Accelerated Fe2+ Regeneration in an Effective Electro-Fenton Process by Boosting Internal Electron Transfer to a Nitrogen-Conjugated Fe(III) Complex

The regeneration rate of Fe²⁺ from Fe³⁺ dictates the performance of the electro-Fenton (EF) process, represented by the amount of produced hydroxyl radicals (·OH). Current strategies for the acceleration of Fe²⁺ regeneration normally require additional chemical reagents, to vary the redox potential of Fe²⁺/Fe³⁺. Here, we report an attempt at using the intrinsic property of the electrode to our advantage, i.e., nitrogen-doped carbon aerogel (NDCA), as a reducing agent for the regeneration of Fe²⁺ without using foreign reagents. Moreover, the pyrrolic N in NDCA provides unpaired electrons through the carbon framework to reduce Fe³⁺, while the graphitic and pyridinic N coordinate with Fe³⁺ to form a C-O-Fe-N₂ bond, facilitating electron transfer from both the external circuit and pyrrolic N to Fe³⁺. Our Fe²⁺/NDCA-EF system exhibits a 5.8 ± 0.3 times higher performance, in terms of the amount of generated ·OH, than a traditional Fenton system using the same Fe²⁺ concentration. In the subsequent reaction, the Fe²⁺/NDCA-EF system demonstrates 100.0% removal of dimethyl phthalate, 3-chlorophenol, bisphenol A, and sulfamethoxazole with a low specific energy consumption of 0.17-0.36 kW·h·g^-1. Furthermore, 90.1 ± 0.6% removal of dissolved organic carbon and 83.3 ± 0.9% removal of NH₃-N are achieved in the treatment of domestic sewage. The purpose of this work is to present a novel strategy for the regeneration of Fe²⁺ in the EF process and also to elucidate the role of different N species of the carbonaceous electrode in contributing to the redox cycle of Fe²⁺/Fe³⁺.

X-ray Free Electron Laser-Induced Synthesis of ε-Iron Nitride at High Pressures

The ultrafast synthesis of ε-Fe₃N_1+x in a diamond-anvil cell (DAC) from Fe and N₂ under pressure was observed using serial exposures of an X-ray free electron laser (XFEL). When the sample at 5 GPa was irradiated by a pulse train separated by 443 ns, the estimated sample temperature at the delay time was above 1400 K, confirmed by in situ transformation of α- to γ-iron. Ultimately, the Fe and N₂ reacted uniformly throughout the beam path to form Fe₃N_1.33, as deduced from its established equation of state (EOS). We thus demonstrate that the activation energy provided by intense X-ray exposures in an XFEL can be coupled with the source time structure to enable exploration of the time-dependence of reactions under high-pressure conditions.

Identifying the Origins of Vacancies in the Crystal Structures of Rock Salt-type Chalcogenide Superconductors

The tailored (computational) design of materials addressing future challenges requires a thorough understanding of their electronic structures. This becomes very apparent for a given material existing in a certain homogeneity range, as its particular composition influences its electronic structure and, eventually, its physical properties. This led us to explore the influence and, furthermore, the origin of vacancies in the crystal structures of rock salt-type superconductors by means of quantum-chemical techniques. In doing so, we examined the vibrational properties, electronic band structures, and nature of bonding for a series of superconducting transition-metal sulfides, i.e., MS (M = Sc, Y, Zr, Lu), which were identified to exist over certain homogeneity ranges. The outcome of our research indicates that the subtle competing interplay between two electronically unfavorable situations at the Fermi levels, i.e., the occupations of flat bands and the populations of antibonding states, appears to control the presence of vacancies in the crystal structures of the sulfides.

Single-crystal diffractometer coupled with double-sided laser heating system at the Extreme Conditions Beamline P02.2 at PETRAIII

Combination of in situ laser heating with single-crystal X-ray diffraction (scXRD) in diamond anvil cells (DACs) provides a tool to study crystal structures and/or chemistry of materials at simultaneous high pressures and high temperatures. Here, we describe the first dedicated single-crystal X-ray diffractometer coupled with double-sided laser heating (dsLH) system. The scXRD/dsLH setup was developed for the P02.2 Extreme Conditions Beamline at PETRA III and became available for general users in 2017. It enables the collection of reliable scXRD data at simultaneous high pressure and high temperature. We demonstrate the performance of the setup on example of studies of iron and chromium nitrides.

Synthesis of FeN4 at 180 GPa and its crystal structure from a submicron-sized grain

Iron tetra-nitride, FeN4, was synthesized from the elements in a laser-heated diamond anvil cell at 180 (5) GPa and 2700 (200) K. Its crystal structure was determined based on single-crystal X-ray diffraction data collected from a submicron-sized grain at the synchrotron beamline ID11 of ESRF. The compound crystallizes in the triclinic space group P . In the asymmetric unit, the Fe atom occupies an inversion centre (Wyckoff position 1d), while two N atoms occupy general positions (2i). The structure is made up from edge-sharing [FeN6] octa-hedra forming chains along [100] and being inter-connected through N-N bridges. N atoms form catena-poly[tetraz-1-ene-1,4-di-yl] anions [-N=N-N-N-]∞ 2- running along [001]. In comparison with the previously reported structure of FeN4 at 135 GPa [Bykov et al. (2018). Nat. Commun. 9, 2756], the crystal structure of FeN4 at 180 GPa is similar but the structural model is significantly improved in terms of the precision of the bond lengths and angles.

Fe-N system at high pressure reveals a compound featuring polymeric nitrogen chains

Poly-nitrogen compounds have been considered as potential high energy density materials for a long time due to the large number of energetic N-N or N=N bonds. In most cases high nitrogen content and stability at ambient conditions are mutually exclusive, thereby making the synthesis of such materials challenging. One way to stabilize such compounds is the application of high pressure. Here, through a direct reaction between Fe and N2 in a laser-heated diamond anvil cell, we synthesize three ironnitrogen compounds Fe3N2, FeN2 and FeN4. Their crystal structures are revealed by single-crystal synchrotron X-ray diffraction. Fe3N2, synthesized at 50 GPa, is isostructural to chromium carbide Cr3C2. FeN2 has a marcasite structure type and features covalently bonded dinitrogen units in its crystal structure. FeN4, synthesized at 106 GPa, features polymeric nitrogen chains of [N42-]n units. Based on results of structural studies and theoretical analysis, [N42-]n units in this compound reveal catena-poly[tetraz-1-ene-1,4-diyl] anions.

The Crystal Orbital Hamilton Population (COHP) Method as a Tool to Visualize and Analyze Chemical Bonding in Intermetallic Compounds

Recognizing the bonding situations in chemical compounds is of fundamental interest for materials design because this very knowledge allows us to understand the sheer existence of a material and the structural arrangement of its constituting atoms. Since its definition 25 years ago, the Crystal Orbital Hamilton Population (COHP) method has been established as an efficient and reliable tool to extract the chemical-bonding information based on electronic-structure calculations of various quantum-chemical types. In this review, we present a brief introduction into the theoretical background of the COHP method and illustrate the latter by diverse applications, in particular by looking at representatives of the class of (polar) intermetallic compounds, usually considered as “black sheep” in the light of valence-electron counting schemes.

High Pressure and High Temperature Synthesis of the Iron Pernitride FeN2

The high pressure chemistry of transition metals and nitrogen was recently discovered to be richer than previously thought, due to the synthesis of several transition metal pernitrides. Here, we explore the pressure-temperature domain of iron with an excess of nitrogen up to 91 GPa and 2200 K. Above 72 GPa and 2200 K, the iron pernitride FeN₂ is produced in a laser-heated diamond anvil cell. This iron-nitrogen compound is the first with a N/Fe ratio greater than 1. The FeN₂ samples were characterized from the maximum observed pressure down to ambient conditions by powder X-ray diffraction and Raman spectroscopy measurements. The crystal structure of FeN₂ is resolved to be a Pnnm marcasite structure, analogously to other transition metal pernitrides. On the basis of the lattice's axial ratios and the recorded N-N vibrational modes of FeN₂, a bond order of 1.5 for the nitrogen dimer is suggested. The bulk modulus of the iron pernitride is determined to be of K₀ = 344(13) GPa, corresponding to an astounding increase of about 208% from pure iron. Upon decompression to ambient conditions, a partial structural phase transition to the theoretically predicted R3̅ m FeN₂ is detected.

High-Pressure NiAs-Type Modification of FeN

The combination of laser-heated diamond anvil cells and synchrotron Mössbauer source spectroscopy were used to investigate high-temperature high-pressure chemical reactions of iron and iron nitride Fe2 N with nitrogen. At pressures between 10 and 45 GPa, significant magnetic hyperfine splitting indicated compound formation after annealing at 1300 K. Subsequent in situ X-ray diffraction reveals a new modification of FeN with NiAs-type crystal structure, as also rationalized by first-principles total-energy and chemical-bonding studies.