Surface Modification of Two‐Dimensional Metal–Organic Layers Creates Biomimetic Catalytic Microenvironments for Selective Oxidation

Immobilized Urease Vector System Based on the Dynamic Defect Regeneration Strategy for Efficient Urea Removal

The clearance of urea poses a formidable challenge, and its excessive accumulation can cause various renal diseases. Urease demonstrates remarkable efficacy in eliminating urea, but cannot be reused. This study aimed to develop a composite vector system comprising microcrystalline cellulose (MCC) immobilized with urease and metal-organic framework (MOF) UiO-66-NH2, denoted as MCC@UiO/U, through the dynamic defect generation strategy. By utilizing competitive coordination, effective immobilization of urease into MCC@UiO was achieved for efficient urea removal. Within 2 h, the urea removal efficiency could reach up to 1500 mg/g, surpassing an 80% clearance rate. Furthermore, an 80% clearance rate can also be attained in peritoneal dialyzate from patients. MCC@UiO/U also exhibits an exceptional bioactivity even after undergoing 5 cycles of perfusion, demonstrating remarkable stability and biocompatibility. This innovative approach and methodology provide a novel avenue and a wide range of immobilized enzyme vectors for clinical urea removal and treatment of kidney diseases, presenting immense potential for future clinical applications.

Phosphate Coordination to Metal-Organic Layer Secondary Building Units Prolongs Drug Retention for Synergistic Chemoradiotherapy

Chemoradiotherapy combines radiotherapy with concurrent chemotherapy to potentiate antitumor activity but exacerbates toxicities and causes debilitating side effects in cancer patients. Herein, we report the use of a nanoscale metal-organic layer (MOL) as a 2D nanoradiosensitizer and a reservoir for the slow release of chemotherapeutics to amplify the antitumor effects of radiotherapy. Coordination of phosphate-containing drugs to MOL secondary building units prolongs their intratumoral retention, allowing for continuous release of gemcitabine monophosphate (GMP) for effective localized chemotherapy. In the meantime, the MOL sensitizes cancer cells to X-ray irradiation and provides potent radiotherapeutic effects. GMP-loaded MOL (GMP/MOL) enhances cytotoxicity by 2-fold and improves radiotherapeutic effects over free GMP in vitro. In a colon cancer model, GMP/MOL retains GMP in tumors for more than four days and, when combined with low-dose radiotherapy, inhibits tumor growth by 98 %. The synergistic chemoradiotherapy enabled by GMP/MOL shows a cure rate of 50 %, improves survival, and ameliorates cancer-proliferation histological biomarkers.

Integrating Photoactive Ligands into Crystalline Ultrathin 2D Metal-Organic Framework Nanosheets for Efficient Photoinduced Energy Transfer

3D metal-organic frameworks (MOFs) have gained attention as heterogeneous photocatalysts due to their porosity and unique host-guest interactions. Despite their potential, MOFs face challenges, such as inefficient mass transport and limited light penetration in photoinduced energy transfer processes. Recent advancements in organic photocatalysis have uncovered a variety of photoactive cores, while their heterogenization remains an underexplored area with great potential to build MOFs. This gap is bridged by incorporating photoactive cores into 2D MOF nanosheets, a process that merges the realms of small-molecule photochemistry and MOF chemistry. This approach results in recyclable heterogeneous photocatalysts that exhibit an improved mass transfer efficiency. This research demonstrates a bottom-up synthetic method for embedding photoactive cores into 2D MOF nanosheets, successfully producing variants such as PCN-641-NS, PCN-643-NS, and PCN-644-NS. The synthetic conditions were systematically studied to optimize the crystallinity and morphology of these 2D MOF nanosheets. Enhanced host-guest interactions in these 2D structures were confirmed through various techniques, particularly solid-state NMR studies. Additionally, the efficiency of photoinduced energy transfer in these nanosheets was evidenced through photoborylation reactions and the generation of reactive oxygen species (ROS).

Dicopper(I) Sites Confined in a Single Metal-Organic Layer Boosting the Electroreduction of CO2 to CH4 in a Neutral Electrolyte

It is challenging and important to achieve high performance for an electrochemical CO2 reduction reaction (eCO2RR) to yield CH4 under neutral conditions. So far, most of the reported active sites for eCO2RR to yield CH4 are single metal sites; the performances are far below the commercial requirements. Herein, we reported a nanosheet metal-organic layer in single-layer, namely, [Cu2(obpy)2] (Cuobpy-SL, Hobpy = 1H-[2,2']bipyridinyl-6-one), possessing dicopper(I) sites for eCO2RR to yield CH4 in a neutral aqueous solution. Detailed examination of Cuobpy-SL revealed high performance for CH4 production with a faradic efficiency of 82(1)% and a current density of ∼90 mA cm-2 at -1.4 V vs. reversible hydrogen electrode (RHE). No obvious degradation was observed over 100 h of continuous operation, representing a remarkable performance to date. Mechanism studies showed that compared with the conventional single-copper sites and completely exposed dicopper(I) sites, the dicopper(I) sites in the confined space formed by the molecular stacking have a strong affinity to key C1 intermediates such as *CO, *CHO, and *CH2O to facilitate the CH4 production, yet inhibiting C-C coupling.

Laser emission from tapered fiber-based liquid-crystal microsphere for sensing

This Letter introduces a novel laser emission probe for liquid-crystal microspheres based on a tapered fiber. A cholesteric liquid crystal (CLC) is injected into a hollow glass microsphere (HGM) attached at the front end of a tapered fiber in order to produce laser. Tapered fibers are preferable to rectangular fibers for liquid-crystal microsphere laser emission. The whispering gallery mode (WGM) laser is significantly suppressed by the tapered fiber-based liquid-crystal microsphere, which also displays an apparent single-mode photonic bandgap (PBG) laser peak. The stimulation response of tapered fiber-based liquid-crystal microspheres to organic vapors causes a modification of the laser peak wavelength with increasing gas concentration. In addition, laser emission generated by tapered fiber-based liquid-crystal microspheres is expected to be used in fields such as microenvironmental biosensing.

Exfoliation of a Two-Dimensional Metal-Organic Framework for Enhanced Photocatalytic CO2 Reduction

A two-dimensional metal-organic framework, FICN-12, was constructed from tris[4-(1H-pyrazole-4-yl)phenyl]amine (H₃TPPA) ligands and Ni₂ secondary building units. The triphenylamine moiety in the H₃TPPA ligand readily absorbs UV-visible photons and sensitizes the Ni center to drive photocatalytic CO₂ reduction. FICN-12 can be exfoliated into monolayer and few-layer nanosheets with a "top-down" approach, which exposes more catalytic sites and increases its catalytic activity. As a result, the nanosheets (FICN-12-MONs) showed photocatalytic CO and CH₄ production rates of 121.15 and 12.17 μmol/g/h, respectively, nearly 1.4 times higher than those of bulk FICN-12.

Application of molecular dynamics simulation in self-assembled cancer nanomedicine

Self-assembled nanomedicine holds great potential in cancer theragnostic. The structures and dynamics of nanomedicine can be affected by a variety of non-covalent interactions, so it is essential to ensure the self-assembly process at atomic level. Molecular dynamics (MD) simulation is a key technology to link microcosm and macroscale. Along with the rapid development of computational power and simulation methods, scientists could simulate the specific process of intermolecular interactions. Thus, some experimental observations could be explained at microscopic level and the nanomedicine synthesis process would have traces to follow. This review not only outlines the concept, basic principle, and the parameter setting of MD simulation, but also highlights the recent progress in MD simulation for self-assembled cancer nanomedicine. In addition, the physicochemical parameters of self-assembly structure and interaction between various assembled molecules under MD simulation are also discussed. Therefore, this review will help advanced and novice researchers to quickly zoom in on fundamental information and gather some thought-provoking ideas to advance this subfield of self-assembled cancer nanomedicine.

TiO2@COF Nanowire Arrays: A "Filter Amplifier" Heterojunction Strategy to Reverse the Redox Nature

Surface modification is a promising method to change the surface properties of nanomaterials, but it is limited in enhancing their intrinsic redox nature. In this work, a "filter amplifier" strategy is proposed for the first time to reverse the intrinsic redox nature of materials. This is demonstrated by coating a COF-316 layer with controlled thickness on TiO₂ to form core-sheath nanowire arrays. This unique structure forms a Z-scheme heterojunction to function as "a filter amplifier" which can conceal the intrinsic oxidative sites and increase the extrinsic reductive sites. Consequently, the selective response of TiO₂ is dramatically reversed from reductive ethanol and methanol to oxidative NO₂. Moreover, TiO₂@COF-316 provides remarkably improved sensitivity, response, and recovery speed, as well as unusual anti-humidity properties as compared with TiO₂. This work not only provides a new strategy to rationally modulate the surface chemistry properties of nanomaterials but also opens an avenue to design high-performance electronic devices with a Z-scheme heterojunction.

Ultrathin 2D Cerium-Based Metal-Organic Framework Nanosheet That Boosts Selective Oxidation of Inert C(sp3 )H Bond through Multiphoton Excitation

The development of methodologies for inducing and tailoring activities of catalysts is an important issue in various catalysis. The ultrathin 2D monolayer metal-organic framework (MOF) nanosheets with more accessible active sites and faster diffusion obtained by exfoliating 3D layered MOFs are of great potential as heterogeneous catalysts, but the rational design and preparation of 3D layered MOFs remains a grand challenge. Herein, a novel weak electrostatic interaction strategy to construct a 3D layered cerium-bearing MOF by coordinating chlorine-capped cerium nodes and linear photoactive methyl viologen (MV⁺ ) organic linkers is used. Under multiphoton excitation, the MV⁺ ligands and CeCl chromophores are triggered consecutively to form the high activity chlorine radical (Cl^• ) for activation of inert C(sp³ )H bond through a hydrogen atom transfer. Benefiting from framework confinement effects, synergistic effects of two active sites and/or flexibility of the ultrathin framework nanosheets with high surface utilization, the observed activities increase in the order CeCl₃ /MV⁺  < bulk 3D MOF crystals < 2D MOF nanosheets in photocatalysis. This work not only contributes a new strategy to construct 3D layered MOFs and their ultrathin nanosheets but also paves the way to use nanostructured MOFs to handle synergy of multiple molecular catalysts.

Selective hydrogenation via precise hydrogen bond interactions on catalytic scaffolds

The active site environment in enzymes has been known to affect catalyst performance through weak interactions with a substrate, but precise synthetic control of enzyme inspired heterogeneous catalysts remains challenging. Here, we synthesize hyper-crosslinked porous polymer (HCPs) with solely -OH or -CH3 groups on the polymer scaffold to tune the environment of active sites. Reaction rate measurements, spectroscopic techniques, along with DFT calculations show that HCP-OH catalysts enhance the hydrogenation rate of H-acceptor substrates containing carbonyl groups whereas hydrophobic HCP- CH3 ones promote non-H bond substrate activation. The functional groups go beyond enhancing substrate adsorption to partially activate the C = O bond and tune the catalytic sites. They also expose selectivity control in the hydrogenation of multifunctional substrates through preferential substrate functional group adsorption. The proposed synthetic strategy opens a new class of porous polymers for selective catalysis.

MOF-coated upconversion nanoconstructs for synergetic photo-chemodynamic/oxygen-elevated photodynamic therapy

Excessive production of intracellular reactive oxygen species (ROS) can induce apoptosis of cancer cells; however, it is often limited by severe triggering conditions and hypoxic microenvironments of solid tumors. To address these issues, herein, we have designed a MOF-coated upconversion nanoconstruct (UCTSCF, referring to UC@Ce6/TFS@mSiO₂@MIL-100(Cu/Fe)) for synergetic photochemodynamic therapy (PCT)/oxygen-elevated photodynamic therapy (PDT). The MOF (MIL-100(Fe)) coating with Cu-doping was designed to catalyze H₂O₂ overexpression in cancer cells to generate the most cytotoxic ˙OH via chemodynamic therapy (CDT). It is noted that UC, representing 808 nm driven upconversion nanoparticles with high tissue penetration depth/low over-heating effects, was designed to provide intense blue light which can relieve the severe triggering conditions of CDT via PCT. Furthermore, the functional layer of the photosensitizer chlorin e6 (Ce6) and O₂-carrying triethoxy(1H,1H,2H,2H-nonafluorohexyl)silane (TFS) co-doped mesoporous silicon (Ce6/TFS@mSiO₂) can cause oxygen-elevated ¹O₂ production upon 671 nm light irradiation. In such a simple ROS generation nanoplatform, we heighten the antitumor effect via oxygen-elevated synergetic tumor PCT/PDT.

2D MOF with Compact Catalytic Sites for the One-pot Synthesis of 2,5-Dimethylfuran from Saccharides via Tandem Catalysis

One pot synthesis of 2,5-dimethylfuran (2,5-DMF) from saccharides under mild conditions is of importance for the production of biofuel and fine chemicals. However, the synthesis requires a multitude of active sites and suffers from slow kinetics due to poor diffusion in most composite catalysts. Herein, a metal-acid functionalized 2D metal-organic framework (MOF; Pd/NUS-SO3 H), as an ultrathin nanosheet of 3-4 nm with Lewis acid, Brønsted acid, and metal active sites, was prepared based on the diazo method for acid modification and subsequent metal loading. This new composite catalyst gives substantially higher yields of DMF than all reported catalysts for different saccharides (fructose, glucose, cellobiose, sucrose, and inulins). Characterization suggests that a cascade of reactions including polysaccharide hydrolysis, isomerization, dehydration, and hydrodeoxygenation takes place with rapid molecular interactions.

Direct photo-oxidation of methane to methanol over a mono-iron hydroxyl site

Natural gas, consisting mainly of methane (CH₄), has a relatively low energy density at ambient conditions (~36 kJ l^-1). Partial oxidation of CH₄ to methanol (CH₃OH) lifts the energy density to ~17 MJ l^-1 and drives the production of numerous chemicals. In nature, this is achieved by methane monooxygenase with di-iron sites, which is extremely challenging to mimic in artificial systems due to the high dissociation energy of the C-H bond in CH₄ (439 kJ mol^-1) and facile over-oxidation of CH₃OH to CO and CO₂. Here we report the direct photo-oxidation of CH₄ over mono-iron hydroxyl sites immobilized within a metal-organic framework, PMOF-RuFe(OH). Under ambient and flow conditions in the presence of H₂O and O₂, CH₄ is converted to CH₃OH with 100% selectivity and a time yield of 8.81 ± 0.34 mmol g_cat^-1 h^-1 (versus 5.05 mmol g_cat^-1 h^-1 for methane monooxygenase). By using operando spectroscopic and modelling techniques, we find that confined mono-iron hydroxyl sites bind CH₄ by forming an [Fe-OH···CH₄] intermediate, thus lowering the barrier for C-H bond activation. The confinement of mono-iron hydroxyl sites in a porous matrix demonstrates a strategy for C-H bond activation in CH₄ to drive the direct photosynthesis of CH₃OH.

Construction and application of base-stable MOFs: a critical review

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials constructed from organic ligands and metal ions/clusters. Owing to their unique advantages, they have attracted more and more attention in recent years and numerous studies have revealed their great potential in various applications. Many important applications of MOFs inevitably involve harsh alkaline operational environments. To achieve high performance and long cycling life in these applications, high stability of MOFs against bases is necessary. Therefore, the construction of base-stable MOFs has become a critical research direction in the MOF field. This review gives a historic summary of the development of base-stable MOFs in the last few years. The key factors that can determine the robustness of MOFs under basic conditions are analyzed. We also demonstrate the exciting achievements that have been made by utilizing base-stable MOFs in different applications. In the end, we discuss major challenges for the further development of base-stable MOFs. Some possible methods to address these problems are presented.

Two-Dimensional Metal-Organic Framework Nanosheets: Synthesis and Applications in Electrocatalysis and Photocatalysis

Two-dimensional metal-organic nanosheets (2D MONs) are an emerging class of ultrathin, porous, and crystalline materials. The organic/inorganic hybrid nature offers MONs distinct advantages over other inorganic nanosheets in terms of diversity of organic ligands and metal notes. Compared to bulk three-dimensional metal-organic frameworks, 2D MONs possess merits of high density and readily accessible catalytic sites, reduced diffusion pathways for reactants/products, and fast electron transport. These features endow MONs with enhanced physical/chemical properties and are ideal for heterogeneous catalysis. In this Review, state-of-the-art synthetic methods for the fabrication of 2D MONs were summarized. The advances of 2D MONs-based materials for electrocatalysis and photocatalysis, including hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO₂ RR), and electro-/photocatalytic organic transformations were systematically discussed. Finally, the challenges and perspectives regarding future design and synthesis of 2D MONs for high-performance electrocatalysis and photocatalysis were provided.

A Substrate-Binding Metal-Organic Layer Selectively Catalyzes Photoredox Ene-Carbonyl Reductive Coupling Reactions

Intermolecular photoredox ene-carbonyl reductive coupling reactions typically have low product selectivity owing to competing dimerization and/or reduction of ketyl radicals. Herein, we report a metal-organic layer (MOL), Hf-Ir-OTf, as a bifunctional photocatalyst for selective photoredox reductive coupling of ketones or aldehydes with electron-deficient alkenes. Composed of iridium-based photosensitizers (Ir-PSs) and triflated Hf₁₂ clusters, Hf-Ir-OTf uses Lewis acidic Hf sites to bind and activate electron-deficient alkenes to accept ketyl radicals generated by adjacent Ir-PSs, thereby suppressing undesired dimerization and reduction of ketyl radicals to enhance the selectivity for the cross-coupling products. The MOL-catalyzed reductive coupling reaction accommodates a variety of olefinic substrates and tolerates reducible groups, nicely complementing current methods for cross-coupling reactions.

Structurally Engineered Light-Responsive Nanozymes for Enhanced Substrate Specificity

Mimicking enzyme specificity via construction of on-demand geometric structures on nanozymes is of great interest in recent years. Although building substrate-specific polymers on nanozymes has achieved great success, polymer-blocked active sites would inevitably lead to decreased activity of nanozymes. Here, we have developed three photoactive metal-organic framework (MOF)-based nanozymes (called 2D-TCPP, 3D-TCPP, and AD-TCPP), which have different geometric structures as well as unshielded active sites. Together with their structural variations and excellent photoresponsive oxidase-like activities, these photoactive nanozymes exhibit structure-dependent specificity for three kinds of substrates (typical oxidase substrates, organic pollutants, and antioxidants). Moreover, AD-TCPP and 3D-TCPP show potential applications for environmental protection and bioanalysis, respectively. This work offers a promising approach to the development of nanozymes with enzyme-like specificity.

Programmable Logic in Metal-Organic Frameworks for Catalysis

Metal-organic frameworks (MOFs) have emerged as one of the most widely investigated materials in catalysis mainly due to their excellent component tunability, high surface area, adjustable pore size, and uniform active sites. However, the overwhelming number of MOF materials and complex structures has brought difficulties for researchers to select and construct suitable MOF-based catalysts. Herein, a programmable design strategy is presented based on metal ions/clusters, organic ligands, modifiers, functional materials, and post-treatment modules, which can be used to design the components, structures, and morphologies of MOF catalysts for different reactions. By establishing the corresponding relationship between these modules and functions, researchers can accurately and efficiently construct heterometallic MOFs, chiral MOFs, conductive MOFs, hierarchically porous MOFs, defective MOFs, MOF composites, and MOF-derivative catalysts. Further, this programmable design approach can also be used to regulate the physical/chemical microenvironments of pristine MOFs, MOF composites, and MOF-derivative materials for heterogeneous catalysis, electrocatalysis, and photocatalysis. Finally, the challenging issues and opportunities for the future research of MOF-based catalysts are discussed. Overall, the modular design concept of this review can be applied as a potent tool for exploring the structure-activity relationships and accelerating the on-demand design of multicomponent catalysts.

Bifunctional Metal-Organic Layers for Tandem Catalytic Transformations Using Molecular Oxygen and Carbon Dioxide

Tandem catalytic reactions improve atom- and step-economy over traditional synthesis but are limited by the incompatibility of the required catalysts. Herein, we report the design of bifunctional metal-organic layers (MOLs), HfOTf-Fe and HfOTf-Mn, consisting of triflate (OTf)-capped Hf₆ secondary building units (SBUs) as strong Lewis acidic centers and metalated TPY ligands as metal active sites for tandem catalytic transformations using O₂ and CO₂ as coreactants. HfOTf-Fe effectively transforms hydrocarbons into cyanohydrins via tandem oxidation with O₂ and silylcyanation whereas HfOTf-Mn converts styrenes into styrene carbonates via tandem epoxidation and CO₂ insertion. Density functional theory calculations revealed the involvement of a high-spin Fe^IV (S = 2) center in the challenging oxidation of the sp³ C-H bond. This work highlights the potential of MOLs as a tunable platform to incorporate multiple catalysts for tandem transformations.

Metal-organic frameworks of linear trinuclear cluster secondary building units: structures and applications

Secondary building units (SBUs) in metal-organic frameworks (MOFs) are essential from both a structural and performance perspective. While a variety of SBUs, such as paddlewheel CuII2, triangular CrIII3, tetrahedral ZnII4, and octahedral ZrIV6 have been extensively studied, the linear trinuclear SBUs (herein denoted as M₃), though frequently encountered, are rarely discussed as a class. A literature survey reveals that M₃ clusters are ubiquitous in discrete molecular entities as well as in MOFs. Unlike most other cluster types, however, they have an unprecedented metal diversity and ligand tolerance. The single-crystals of some M₃-based MOFs are also sufficiently robust upon guest removal and exchange or multi-step post-modifications to enable catalytic mechanism elucidation. Some of these M₃-based SBUs endow MOFs with stability under demanding conditions necessary, for example, in flue gas separation. Herein we review MOFs sustained by this common but under-appreciated class of SBUs and discuss applications of the resulting MOF motifs.

Using Postsynthetic X-Type Ligand Exchange to Enhance CO2 Adsorption in Metal-Organic Frameworks with Kuratowski-Type Building Units

Postsynthetic modification methods have emerged as indispensable tools for tuning the properties and reactivity of metal-organic frameworks (MOFs). In particular, postsynthetic X-type ligand exchange (PXLE) at metal building units has gained increasing attention as a means of immobilizing guest species, modulating the reactivity of framework metal ions, and introducing new functional groups. The reaction of a Zn-OH functionalized analogue of CFA-1 (1-OH, Zn(ZnOH)₄(bibta)₃, where bibta^2- = 5,5'-bibenzotriazolate) with organic substrates containing mildly acidic E-H groups (E = C, O, N) results in the formation of Zn-E species and water as a byproduct. This Brønsted acid-base PXLE reaction is compatible with substrates with pK_a(DMSO) values as high as 30 and offers a rapid and convenient means of introducing new functional groups at Kuratwoski-type metal nodes. Gas adsorption and diffuse reflectance infrared Fourier transform spectroscopy experiments reveal that the anilide-exchanged MOFs 1-NHPh_0.9 and 1-NHPh_2.5 exhibit enhanced low-pressure CO₂ adsorption compared to 1-OH as a result of a Zn-NHPh + CO₂ ⇌ Zn-O₂CNHPh chemisorption mechanism. The MFU-4l analogue 2-NHPh ([Zn₅(OH)_2.1(NHPh)_1.9(btdd)₃], where btdd^2- = bis(1,2,3-triazolo)dibenzodioxin), shows a similar improvement in CO₂ adsorption in comparison to the parent MOF containing only Zn-OH groups.

Metal-Free Photocatalysis: Two-Dimensional Nanomaterial Connection toward Advanced Organic Synthesis

Two-dimensional (2D) nanostructures are a frontier in materials chemistry as a result of their extraordinary properties. Metal-free 2D nanomaterials possess extra appeal due to their improved cost-effectiveness and lower toxicity with respect to many inorganic structures. The outstanding electronic characteristics of some metal-free 2D semiconductors have projected them into the world of organic synthesis, where they can function as high-performance photocatalysts to drive the sustainable synthesis of high-value organic molecules. Recent reports on this topic have inspired a stream of research and opened up a theme that we believe will become one of the most dominant trends in the forthcoming years.

2D metal-organic framework-based materials for electrocatalytic, photocatalytic and thermocatalytic applications

Ultrathin two-dimensional metal-organic frameworks (2D MOFs) have recently attracted extensive interest in various catalytic fields (e.g., electrocatalysis, photocatalysis, thermocatalysis) due to their ultrathin thickness, large surface area, abundant accessible unsaturated active sites and tunable surface properties. Besides tuning the intrinsic properties of pristine 2D MOFs by changing the metal nodes and organic ligands, one of the hot research trends is to develop 2D MOF hybrids and 2D MOF-derived materials with higher stability and conductivity in order to further increase their activity and durability. Here, the synthesis of 2D MOF nanosheets is briefly summarized and discussed. More attention is focused on summaries and discussions about the applications of these 2D MOFs, their hybrids and their derived materials as electrocatalysts, photocatalysts and thermocatalysts. The superior properties and catalytic performance of these 2D MOF-based catalysts compared to their 3D MOF counterparts in electrocatalysis, photocatalysis and thermocatalysis are highlighted. The enhanced activities of 2D MOFs, their hybrids and derivatives come from abundant accessible active sites, a high density of unsaturated metal nodes, ultrathin thickness, and tunable microenvironments around the MOFs. Views regarding current and future challenges in the field, and new advances in science and technology to meet these challenges, are also presented. Finally, conclusions and outlooks in this field are provided.

Facile electron delivery from graphene template to ultrathin metal-organic layers for boosting CO2 photoreduction

Metal-organic layers with ordered structure and molecular tunability are of great potential as heterogeneous catalysts due to their readily accessible active sites. Herein, we demonstrate a facile template strategy to prepare metal-organic layers with a uniform thickness of three metal coordination layers (ca. 1.5 nm) with graphene oxide as both template and electron mediator. The resulting hybrid catalyst exhibits an excellent performance for CO₂ photoreduction with a total CO yield of 3133 mmol g^–1_MOL (CO selectivity of 95%), ca. 34 times higher than that of bulky Co-based metal-organic framework. Systematic studies reveal that well-exposed active sites in metal-organic layers, and facile electron transfer between heterogeneous and homogeneous components mediated by graphene oxide, greatly contribute to its high activity. This work highlights a facile way for constructing ultrathin metal-organic layers and demonstrates charge transfer pathway between conductive template and catalyst for boosting photocatalysis.

While solar-to-fuel energy conversion is appealing, materials require accessible active sites for reactants and rapid electron transfer steps. Here, authors support ultrathin metal-organic layers with graphene oxide as both template and electron mediator to boost CO₂ photoreduction performance.

Mesoporous Methyl-Functionalized Titanosilicate Produced by Aerosol Process for the Catalytic Epoxidation of Olefins

Titanosilicates (Ti-SiO2) are well-known catalysts for the epoxidation of olefins. Isolated Ti inserted in the silica framework in tetrahedral coordination are the active species. Recently, adjusting the hydrophobic/hydrophilic balance of such catalysts’ surfaces has appeared as a promising tool to further boost their performance. However, adjusting the hydrophobic/hydrophilic balance via a one-pot classical sol-gel generally leads to a decrease in the Ti dispersion and/or collapse of the pore network. To overcome this limitation, hydrophobic mesoporous Ti-SiO2 were here synthesized by aerosol-assisted one-pot sol–gel, which allowed the simultaneous control of their Ti loading, degree of methyl-functionalization, and textural properties. Methyl-functionalization was achieved by a partial substitution of tetraethoxy silane (TEOS) by methyltriethoxy silane (MTES) in different ratios. Solid-state 29Si-NMR, FTIR, TGA, and vapor-phase water adsorption showed that methyl moieties were effectively incorporated, conferring a hydrophobic property to the Ti-SiO2 catalysts. ICP-AES, DRUV, XPS, and N2 physisorption demonstrated that Ti dispersion and textural properties were both successfully preserved upon the incorporation of the methyl moieties. In the epoxidation of cyclooctene with tert-butyl hydroperoxide as oxidant, the hydrophobic Ti-SiO2 showed higher catalytic performance than pristine Ti-SiO2 prepared without MTES. In addition to disentangling the positive effect of adjusting the hydrophobic/hydrophilic balance of epoxidation catalysts on their performance, this contribution highlights the advantages of the aerosol procedure to synthesize mesoporous functionalized catalysts with very high dispersion of active sites.

Two-dimensional stable and ultrathin cluster-based metal–organic layers for efficient electrocatalytic water oxidation

The report describes the successful synthesis of CoNi bimetal two-dimensional CMOLs directly grown on Ni foam (Co_0.6Ni_0.4-CMOLs/NF), which shows excellent catalytic activity and stability for the OER under alkaline conditions.

Metal-Organic Layers for Electrocatalysis and Photocatalysis

Metal-organic layers (MOLs) are two-dimensional analogues of metal-organic frameworks (MOFs) with a high aspect ratio and thickness down to a monolayer. Active sites on MOLs are more accessible than those on MOFs thanks to the two-dimensional feature of MOLs, which allows easier chemical modification around the catalytic center. MOLs can also be assembled with other functional materials through surface anchoring sites that can facilitate charge/energy transport through the hybrid material. MOLs are thus quite suitable for interfacial catalysis like electrocatalysis and photocatalysis. In this outlook, we focus on representative progress of constructing unique interfacial sites on MOLs with designer paths for charge separation and energy transfer, as well as cooperative cavities for superior substrate adsorption and activation. We also discuss challenges and potentials in the future development of MOL catalysts and catalysts beyond MOLs.

Functionalization of Zirconium-Based Metal-Organic Layers with Tailored Pore Environments for Heterogeneous Catalysis

Intriguing properties and functions are expected to implant into metal-organic layers (MOLs) to achieve tailored pore environments and multiple functionalities owing to the synergies among multiple components. Herein, we demonstrate a facile one-pot synthetic strategy to incorporate multiple functionalities into stable zirconium MOLs via secondary ligand pillaring. Through the combination of Zr₆ -BTB (BTB=benzene-1,3,5-tribenzoate) layers and diverse secondary ligands (including ditopic and tetratopic linkers), 31 MOFs with multi-functionalities were systematically prepared. Notably, a metal-phthalocyanine fragment was successfully incorporated into this Zr-MOL system, giving rise to an ideal platform for the selective oxidation of anthracene. The organic functionalization of two-dimensional MOLs can generate tunable porous structures and environments, which may facilitate the excellent catalytic performance of as-synthesized materials.

Molecular Vises for Precisely Positioning Ligands near Catalytic Metal Centers in Metal-Organic Frameworks

We report the construction of a molecular vise by pairing a tritopic phenylphosphorus(III) linker and a monotopic linker in opposite positions within a metal-organic framework. The angle between these linkers at metal sites is fixed upon changing the functionality in the monotopic linker, while the distance between them is precisely tuned. This distance within the molecular vise is accurately measured by ¹H-³¹P solid-state nuclear magnetic resonance spectroscopy. This unveils the impact of the distance on catalytic performance without interference from electrostatic effects or changes in the angle of the ligand, which is unprecedented in classic organometallic complexes.

The function of metal-organic frameworks in the application of MOF-based composites

In the last two decades, metal-organic frameworks (MOFs), as a class of porous crystalline materials formed by organic linkers coordinated-metal ions, have attracted increasing attention due to their unique structures and wide applications. Compared to single components, various well-designed MOF-based composites combining MOFs with other functional materials, such as nanoparticles, quantum dots, natural enzymes and polymers with remarkably enhanced or novel properties have recently been reported. To efficiently and directionally synthesize high-performance MOF-based composites for specific applications, it is vital to understand the structural-functional relationships and role of MOFs. In this review, preparation methods of MOF-based composites are first summarized and then the relationship between the structure and performance is determined. The functions of MOFs in practical use are classified and discussed through various examples, which may help chemists to understand the structural-functional relationship in MOF-based composites from a new perspective.

Coordination tailoring of water-labile 3D MOFs to fabricate ultrathin 2D MOF nanosheets

A novel coordination tailoring top-down delamination strategy involving the controllable partial disassembly of water-labile 3D MOFs has been explored to fabricate ultrathin 2D MOF nanosheets, and it exhibits many advantages such as green, convenience and high efficiency. Accordingly, 2D ultrathin MOF nanosheets with a two-fold interpenetrated architecture have been rapidly obtained from a 3D pillar-layered MOF, and they show distinguished fluorescence responses to different solvents.