Redox-Driven Migration of Copper Ions in the Cu-CHA Zeolite as Shown by the In Situ PXRD/XANES Technique

Stable anchoring of single rhodium atoms by indium in zeolite alkane dehydrogenation catalysts

Maintaining the stability of single-atom catalysts in high-temperature reactions remains extremely challenging because of the migration of metal atoms under these conditions. We present a strategy for designing stable single-atom catalysts by harnessing a second metal to anchor the noble metal atom inside zeolite channels. A single-atom rhodium-indium cluster catalyst is formed inside zeolite silicalite-1 through in situ migration of indium during alkane dehydrogenation. This catalyst demonstrates exceptional stability against coke formation for 5500 hours in continuous pure propane dehydrogenation with 99% propylene selectivity and propane conversions close to the thermodynamic equilibrium value at 550°C. Our catalyst also operated stably at 600°C, offering propane conversions of >60% and propylene selectivity of >95%.

Intergrowth Zeolites, Synthesis, Characterization, and Catalysis

Microporous zeolites that can act as heterogeneous catalysts have continued to attract a great deal of academic and industrial interest, but current progress in their synthesis and application is restricted to single-phase zeolites, severely underestimating the potential of intergrowth frameworks. Compared with single-phase zeolites, intergrowth zeolites possess unique properties, such as different diffusion pathways and molecular confinement, or special crystalline pore environments for binding metal active sites. This review first focuses on the structural features and synthetic details of all the intergrowth zeolites, especially providing some insightful discussion of several potential frameworks. Subsequently, characterization methods for intergrowth zeolites are introduced, and highlighting fundamental features of these crystals. Then, the applications of intergrowth zeolites in several of the most active areas of catalysis are presented, including selective catalytic reduction of NOx by ammonia (NH3-SCR), methanol to olefins (MTO), petrochemicals and refining, fine chemicals production, and biomass conversion on Beta, and the relationship between structure and catalytic activity was profiled from the perspective of intergrowth grain boundary structure. Finally, the synthesis, characterization, and catalysis of intergrowth zeolites are summarized in a comprehensive discussion, and a brief outlook on the current challenges and future directions of intergrowth zeolites is indicated.

Interplay Between Particle Size and Hierarchy of Zeolite ZSM-5 During the CO2 -to-aromatics Process

The CO2 -to-aromatics process is a chemical reaction that converts carbon dioxide (CO2 ) into valuable petrochemical, i. e., aromatics (especially, benzene, toluene, and xylene) over the metal/zeolite bifunctional catalytic systems. These aromatics are used in producing plastics, fibers, and other industrial products, which are currently exclusively sourced from fossil-derived feedstocks. The significance of this process lies in its potential to mitigate climate change by reducing greenhouse gas emissions and simultaneously producing valuable chemicals. Consequently, these CO2 -derived aromatics can reduce the reliance on fossil fuels as a source of feedstocks, which can help to promote a more sustainable and circular economy. Owing to the existence of a wider straight channel favoring the aromatization process, zeolite ZSM-5 is extensively used to yield aromatics during CO2 hydrogenation over bifunctional (metal/zeolite) catalytic systems. To provide a better understanding of this unique property of zeolite ZSM-5, this work investigates the impact of particle size and hierarchy of the zeolite and how these govern the reaction performance and the overall selectivity. As a result, an improved understanding of the zeolite-catalyzed hydrocarbon conversion process has been obtained.

Revealing the Formation and Reactivity of Cage-Confined Cu Pairs in Catalytic NOx Reduction over Cu-SSZ-13 Zeolites by In Situ UV-Vis Spectroscopy and Time-Dependent DFT Calculation

The low-temperature mechanism of chabazite-type small-pore Cu-SSZ-13 zeolite, a state-of-the-art catalyst for ammonia-assisted selective reduction (NH3-SCR) of toxic NOx pollutants from heavy-duty vehicles, remains a debate and needs to be clarified for further improvement of NH3-SCR performance. In this study, we established experimental protocols to follow the dynamic redox cycling (i.e., CuII ↔ CuI) of Cu sites in Cu-SSZ-13 during low-temperature NH3-SCR catalysis by in situ ultraviolet-visible spectroscopy and in situ infrared spectroscopy. Further integrating the in situ spectroscopic observations with time-dependent density functional theory calculations allows us to identify two cage-confined transient states, namely, the O2-bridged Cu dimers (i.e., μ-η2:η2-peroxodiamino dicopper) and the proximately paired, chemically nonbonded CuI(NH3)2 sites, and to confirm the CuI(NH3)2 pair as a precursor to the O2-bridged Cu dimer. Comparative transient experiments reveal a particularly high reactivity of the CuI(NH3)2 pairs for NO-to-N2 reduction at low temperatures. Our study demonstrates direct experimental evidence for the transient formation and high reactivity of proximately paired CuI sites under zeolite confinement and provides new insights into the monomeric-to-dimeric Cu transformation for completing the Cu redox cycle in low-temperature NH3-SCR catalysis over Cu-SSZ-13.

Influence of ion mobility on the redox and catalytic properties of Cu ions in zeolites

This contribution aims at analysing the current understanding about the influence of Al distribution, zeolite topology, ligands/reagents and oxidation state on ions mobility in Cu-zeolites, and its relevance toward reactivity of the metal sites. The concept of Cu mobilization has been originally observed in the presence of ammonia, favouring the activation of oxygen by formation of NH3 oxo-bridged complexes in zeolites and opening a new perspective about the chemistry in single-site zeolite-based catalysts, in particular in the context of the NH3-mediated Selective Catalytic Reduction of NO x (NH3-SCR) processes. A different mobility of bare Cu+/Cu2+ ions has been documented too, showing for Cu+ a better mobilization than for Cu2+ also in absence of ligands. These concepts can have important consequences for the formation of Cu-oxo species, active and selective in other relevant reactions, such as the direct conversion of methane to methanol. Here, assessing the structure, the formation pathways and reactivity of Cu-oxo mono- or multimeric moieties still represents a challenging playground for chemical scientists. Translating the knowledge about Cu ions mobility and redox properties acquired in the context of NH3-SCR reaction into the field of direct conversion of methane to methanol can have important implications for a better understanding of transition metal ions redox properties in zeolites and for an improved design of catalysts and catalytic processes.

New insights into the NH3-selective catalytic reduction of NO over Cu-ZSM-5 as revealed by operando spectroscopy

To control diesel vehicle NO _x emissions, Cu-exchanged zeolites have been applied in the selective catalytic reduction (SCR) of NO using NH₃ as reductant. However, the harsh hydrothermal environment of tailpipe conditions causes irreversible catalyst deactivation. The aggregation of isolated Cu²⁺ brings about unselective ammonia oxidation along with the main NH₃-SCR reaction. An unusual 'dip' shaped NO conversion curve was observed in the steamed zeolite Cu-ZSM-5, resulting from the undesired NH₃ oxidation that produced NO. Here we gain further insights into the NH₃-SCR reaction and its deactivation by employing operando UV-vis diffuse reflectance spectroscopy (DRS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) on fresh and steamed zeolite Cu-ZSM-5. We found that tetragonally distorted octahedral Cu²⁺ with associated NH₃ preferentially forms during low temperature NH₃-SCR (<250 °C) in fresh Cu-ZSM-5. The high coordination number of Cu²⁺ ensures the availability for high coverage of nitrate intermediates. Whilst in the steamed Cu-ZSM-5, [Cu _x (OH)_2x-1]⁺ oligomers/clusters in pseudo-tetrahedral symmetry with coordinated NH₃ accumulated during the low-temperature NH₃-SCR reaction. These clusters presented a strong adsorption of surface NH₃ and nitrates/nitric acid at low temperatures and therefore limited the reaction between surface species in the steamed Cu-ZSM-5. Further release of NH₃ with increased reaction temperature favors NH₃ oxidation that causes the drop of NO conversion at ∼275 °C. Moreover, competitive adsorption of NH₃ and nitrates/nitric acid occurs on shared Lewis-acidic adsorption sites. Prompt removal of surface nitrates/nitric acid by NO avoids the surface blockage and tunes the selectivity by alternating nitrate-nitrite equilibrium. The formation of adsorbed NO₂ and HNO _x points to the necessity of an acid adsorbent in practical applications. The structural similarity under the NH₃-SCR reaction and unselective NH₃ oxidation confirmed the entanglement of these two reactions above 250 °C.

Enhanced hydrothermal stability and SO2-tolerance of Cu–Fe modified AEI zeolite catalysts in NH3-SCR of NOx

Cu/Fe-SSZ-39 zeolites with AEI structure show significant enhancements on the NH3-SCR reactivity, hydrothermal stability and SO2-tolerance, which makes them very promising in deNOx applications.

Hybrid monometallic and bimetallic copper-palladium zeolite catalysts for direct synthesis of dimethyl ether from CO2

Nowadays, carbon dioxide is the major reason of the global climate changes. The direct CO2 hydrogenation to dimethyl ether produces an important platform molecule for synthesis of fuels and chemicals...

Mobility and Reactivity of Cu+ Species in Cu-CHA Catalysts under NH3-SCR-NOx Reaction Conditions: Insights from AIMD Simulations

The mobility of the copper cations acting as active sites for the selective catalytic reduction of nitrogen oxides with ammonia in Cu-CHA catalysts varies with temperature and feed composition. Herein, the migration of [Cu(NH₃)₂]⁺ complexes between two adjacent cavities of the chabazite structure, including other reactant molecules (NO, O₂, H₂O, and NH₃), in the initial and final cavities is investigated using ab initio molecular dynamics (AIMD) simulations combined with enhanced sampling techniques to describe hopping events from one cage to the other. We find that such diffusion is only significantly hindered by the presence of excess NH₃ or NO in the initial cavity, since both reactants form with [Cu(NH₃)₂]⁺ stable intermediates which are too bulky to cross the 8-ring windows connecting the cavities. The presence of O₂ modifies strongly the interaction of NO with Cu⁺. At low temperatures, we observe NO detachment from Cu⁺ and increased mobility of the [Cu(NH₃)₂]⁺ complex, while at high temperatures, NO reacts spontaneously with O₂ to form NO₂. The present simulations give evidence for recent experimental observations, namely, an NH₃ inhibition effect on the SCR reaction at low temperatures, and transport limitations of NO and NH₃ at high temperatures. Our first principle simulations mimicking operating conditions support the existence of two different reaction mechanisms operating at low and high temperatures, the former involving dimeric Cu(NH₃)₂-O₂-Cu(NH₃)₂ species and the latter occurring by direct NO oxidation to NO₂ in one single cavity.

Visualizing Element Migration over Bifunctional Metal-Zeolite Catalysts and its Impact on Catalysis

The catalytic performance of composite catalysts is not only affected by the physicochemical properties of each component, but also the proximity and interaction between them. Herein, we employ four representative oxides (In₂ O₃ , ZnO, Cr₂ O₃ , and ZrO₂ ) to combine with H-ZSM-5 for the hydrogenation of CO₂ to hydrocarbons directed by methanol intermediate and clarify the correlation between metal migration and the catalytic performance. The migration of metals to zeolite driven by the harsh reaction conditions can be visualized by electron microscopy, meanwhile, the change of zeolite acidity is also carefully characterized. The protonic sites of H-ZSM-5 are neutralized by mobile indium and zinc species via a solid ion-exchange mechanism, resulting in a drastic decrease of C₂₊ hydrocarbon products over In₂ O₃ /H-ZSM-5 and ZnO/H-ZSM-5. While, the thermomigration ability of chromium and zirconium species is not significant, endowing Cr₂ O₃ /H-ZSM-5 and ZrO₂ /H-ZSM-5 catalysts with high selectivity of C₂₊ hydrocarbons.

DFT study of H2 adsorption at a Cu-SSZ-13 zeolite: a cluster approach

In this work the H2 adsorption at a Cu(i)-SSZ-13 exchanged zeolite was theoretically investigated. A systematic cluster approach was used and different density functionals (B3LYP, B3LYP-D3(BJ), M06L, PBE, PBE-D3(BJ) and ωB97XD) and a def2-SVP basis set were benchmarked. In order to select the best approach to the H2 adsorption over a Cu(i)-SSZ-13 cluster with 78 atoms (16 T-sites), two main tasks were performed: (1) a comparison between theoretical and experimental structures and (2) a comparison between theoretical and experimental adsorption enthalpies. By employing the most suitable functional - the ωB97X-D - the H2 interaction with the zeolite structure was studied by means of NBO, NCI, AIM and DLPNO-CCSD(T)/LED analyses.

Highly Efficient NO Abatement over Cu-ZSM-5 with Special Nanosheet Features

Conventional Cu-ZSM-5 and special Cu-ZSM-5 catalysts with diverse morphologies (nanoparticles, nanosheets, hollow spheres) were synthesized and comparatively investigated for their performances in the selective catalytic reduction (SCR) of NO to N₂ with ammonia. Significant differences in SCR behavior were observed, and nanosheet-like Cu-ZSM-5 showed the best SCR performance with the lowest T₅₀ of 130 °C and nearly complete conversion in the temperature range of 200-400 °C. It was found that Cu-ZSM-5 nanosheets [mainly exposed (0 1 0) crystal plane] with abundant mesopores and framework Al species were favorable for the formation of high external surface areas and Al pairs, which influenced the local environment of Cu. This motivated the preferential formation of active copper species and the rapid switch between Cu²⁺ and Cu⁺ species during NH₃-SCR, thus exhibiting the highest NO conversion. In situ diffused reflectance infrared Fourier transform spectroscopy (DRIFTS) results indicated that the Cu-ZSM-5 nanosheets were dominated by the Eley-Rideal (E-R) mechanism and the labile nitrite species (NH₄NO₂) were the crucial intermediates during the NH₃-SCR process, while the inert nitrates were more prone to generate on Cu-ZSM-5 nanoparticles and conventional one. The combined density functional theory (DFT) calculations revealed that the decomposition energy barrier of nitrosamide species (NH₂NO) on the (0 1 0) crystal plane of Cu-ZSM-5 was lower than those on (0 0 1) and (1 0 0) crystal planes. This study provides a strategy for the design of NH₃-SCR zeolite catalysts.

On the Redox Mechanism of Low-Temperature NH3 -SCR over Cu-CHA: A Combined Experimental and Theoretical Study of the Reduction Half Cycle

Cu-CHA is the state-of-the-art catalyst for the Selective Catalytic Reduction (SCR) of NOx in vehicle applications. Although extensively studied, diverse mechanistic proposals still stand in terms of the nature of active Cu-ions and reaction pathways in SCR working conditions. Herein we address the redox mechanism underlying Low-Temperature (LT) SCR on Cu-CHA by an integration of chemical-trapping techniques, transient-response methods, operando UV/Vis-NIR spectroscopy with modelling tools based on transient kinetic analysis and density functional theory calculations. We show that the rates of the Reduction Half-Cycle (RHC) of LT-SCR display a quadratic dependence on Cu^II , thus questioning mechanisms based on isolated Cu^II -ions. We propose, instead, a Cu^II -pair mediated LT-RHC pathway, in which NO oxidative activation to mobile nitrite-precursor intermediates accounts for Cu^II reduction. These results highlight the role of dinuclear Cu complexes not only in the oxidation part of LT-SCR, but also in the RHC reaction cascade.

Elucidation of copper environment in a Cu-Cr-Fe oxide catalyst through in situ high-resolution XANES investigation

Copper containing materials are widely used in a range of catalytic applications. Here, we report the use of Cu K-edge high resolution XANES to determine the local site symmetry of copper ions during the thermal treatment of a Cu-Cr-Fe oxide catalyst. We exploited the Cu K-edge XANES spectral features, in particular the correlation between area under the pre-edge peak and its position to determine the local environment of Cu2+ ions. The information gained from this investigation rules out the presence of Cu2+ ions in a tetrahedral or square planar geometry, a mixture of these sites, or in a reduced oxidation state. Evidence is presented that the Cu2+ ions in the Cu-Cr-Fe oxide system are present in a distorted octahedral environment.

Heterometallic [Cu–O–M]2+ active sites for methane C–H activation in zeolites: stability, reactivity, formation mechanism and relationship to other active sites

Formation energies and mechanisms, autoreduction and methane C–H reactivities were obtained for [Cu–O–M]²⁺ species (M = Ti–Cu, Zr–Mo and Ru–Ag) in mordenite with DFT. These reveal that [Cu₂O]²⁺ is best suited for MMC.

Recent Understanding of Low-Temperature Copper Dynamics in Cu-Chabazite NH3-SCR Catalysts

Dynamic motion of NH3-solvated Cu sites in Cu-chabazite (Cu-CHA) zeolites, which are the most promising and state-of-the-art catalysts for ammonia-assisted selective reduction of NOx (NH3-SCR) in the aftertreatment of diesel exhausts, represents a unique phenomenon linking heterogeneous and homogeneous catalysis. This review first summarizes recent advances in the theoretical understanding of such low-temperature Cu dynamics. Specifically, evidence of both intra-cage and inter-cage Cu motions, given by ab initio molecular dynamics (AIMD) or metadynamics simulations, will be highlighted. Then, we will show how, among others, synchrotron-based X-ray spectroscopy, vibrational and optical spectroscopy (diffuse reflection infrared Fourier transform spectroscopy (DRIFTS) and diffuse reflection ultraviolet-visible spectroscopy (DRUVS)), electron paramagnetic spectroscopy (EPR), and impedance spectroscopy (IS) can be combined and complement each other to follow the evolution of coordinative environment and the local structure of Cu centers during low-temperature NH3-SCR reactions. Furthermore, the essential role of Cu dynamics in the tuning of low-temperature Cu redox, in the preparation of highly dispersed Cu-CHA catalysts by solid-state ion exchange method, and in the direct monitoring of NH3 storage and conversion will be presented. Based on the achieved mechanistic insights, we will discuss briefly the new perspectives in manipulating Cu dynamics to improve low-temperature NH3-SCR efficiency as well as in the understanding of other important reactions, such as selective methane-to-methanol oxidation and ethene dimerization, catalyzed by metal ion-exchanged zeolites.

Cu- and Fe-speciation in a composite zeolite catalyst for selective catalytic reduction of NOx: insights from operando XAS

Cu-SAPO-34 (Cu-CZC) and Fe-mordenite (Fe-MOR) and their mechanical mixture (50 : 50) have been exhaustively investigated by means of operando X-ray absorption spectroscopy under NH₃-SCR conditions.

Single-Atom Catalysts Supported by Crystalline Porous Materials: Views from the Inside

Single-atom catalysts (SACs) have recently emerged as an exciting system in heterogeneous catalysis showing outstanding performance in many catalytic reactions. Single-atom catalytic sites alone are not stable and thus require stabilization from substrates. Crystalline porous materials such as zeolites and metal-organic frameworks (MOFs) are excellent substrates for SACs, offering high stability with the potential to further enhance their performance due to synergistic effects. This review features recent work on the structure, electronic, and catalytic properties of zeolite and MOF-protected SACs, offering atomic-scale views from the "inside" thanks to the subatomic resolution of synchrotron X-ray absorption spectroscopy (XAS). The extended X-ray absorption fine structure and associated methods will be shown to be powerful tools in identifying the single-atom site and can provide details into the coordination environment and bonding disorder of SACs. The X-ray absorption near-edge structure will be demonstrated as a valuable method in probing the electronic properties of SACs by analyzing the white line intensity, absorption edge shift, and pre-/postedge features. Emphasis is also placed on in situ/operando XAS using state-of-the-art equipment, which can unveil the changes in structure and properties of SACs during the dynamic catalytic processes in a highly sensitive and time-resolved manner.

Revival of Zeolite-Templated Nanocarbon Materials: Recent Advances in Energy Storage and Conversion

Nanocarbon materials represent one of the hottest topics in physics, chemistry, and materials science. Preparation of nanocarbon materials by zeolite templates has been developing for more than 20 years. In recent years, novel structures and properties of zeolite-templated nanocarbons have been evolving and new applications are emerging in the realm of energy storage and conversion. Here, recent progress of zeolite-templated nanocarbons in advanced synthetic techniques, emerging properties, and novel applications is summarized: i) thanks to the diversity of zeolites, the structures of the corresponding nanocarbons are multitudinous; ii) by various synthetic techniques, novel properties of zeolite-templated nanocarbons can be achieved, such as hierarchical porosity, heteroatom doping, and nanoparticle loading capacity; iii) the applications of zeolite-templated nanocarbons are also evolving from traditional gas/vapor adsorption to advanced energy storage techniques including Li-ion batteries, Li-S batteries, fuel cells, metal-O2 batteries, etc. Finally, a perspective is provided to forecast the future development of zeolite-templated nanocarbon materials.

Deactivation of Cu-Exchanged Automotive-Emission NH3 -SCR Catalysts Elucidated with Nanoscale Resolution Using Scanning Transmission X-ray Microscopy

To gain insight into the underlying mechanisms of catalyst durability for the selective catalytic reduction (SCR) of NOx with an ammonia reductant, we employed scanning transmission X-ray microscopy (STXM) to study Cu-exchanged zeolites with the CHA and MFI framework structures before and after simulated 135 000-mile aging. X-ray absorption near-edge structure (XANES) measurements were performed at the Al K- and Cu L-edges. The local environment of framework Al, the oxidation state of Cu, and geometric changes were analyzed, showing a multi-factor-induced catalytic deactivation. In Cu-exchanged MFI, a transformation of CuII to CuI and Cux Oy was observed. We also found a spatial correlation between extra-framework Al and deactivated Cu species near the surface of the zeolite as well as a weak positive correlation between the amount of CuI and tri-coordinated Al. By inspecting both Al and Cu in fresh and aged Cu-exchanged zeolites, we conclude that the importance of the preservation of isolated CuII sites trumps that of Brønsted acid sites for NH3 -SCR activity.

Poisoning-Resistant NOx Reduction in the Presence of Alkaline and Heavy Metals over H-SAPO-34-Supported Ce-Promoted Cu-Based Catalysts

Selective catalytic reduction (SCR) of NO_x using NH₃ in the presence of alkaline and heavy metals is still an issue in the application of a stationary source. Reported here is the rational design of a novel H-SAPO-34-supported ceria-promoted copper-based catalyst (CuCe/H-SAPO-34) that demonstrates exceptional resistance against alkali (K), alkaline earth (Ca), and heavy metal (Pb) poisoning during SCR of NO_x. The H-SAPO-34 support contained numerous acid sites that allowed Cu-based catalysts to maintain their catalytic activity while also resisting poisoning by K and Ca. Decorating the catalyst with CeO₂ promoted the low-temperature deNO_x activity by accelerating the redox cycle with Cu species and assisted the H-SAPO-34 in capturing Ca and Pb. H-SAPO-34-supported ceria-promoted copper oxide catalysts prevented the irreversible combination of K, Ca, or Pb with the active centers, providing the catalyst with excellent poisoning resistance. This work provides a strategy for the development of high-performance, poisoning-resistant catalysts for NH₃-SCR of NO_x in the presence of alkaline and heavy metals.

Cu oxo nanoclusters for direct oxidation of methane to methanol: formation, structure and catalytic performance

Cu oxo nanoclusters hosted in microporous solids have emerged in the past decades as promising materials for catalyzing the selective conversion of methane to methanol.

Laboratory setup for rapid in situ powder X-ray diffraction elucidating Ni particle formation in supercritical methanol

The design and function of a custom-made Soller slit for a laboratory 2D area detector is presented through a series of demonstration images and an in situ experiment following the formation of nickel particles in supercritical methanol. The in situ experiment is performed in a capillary sample environment, modified for a laboratory scale Rigaku Smartlab diffractometer, and with a temperature range of 300-1050 K. The formation of nickel particles was followed successfully using laboratory in situ X-ray powder diffraction with a time resolution in the order of 27 s. Observations from the area detector images showed the appearance of three distinct phases during the reaction: Ni₃(NO₃)₂(OH)₄, NiO, and Ni. The images were linearly integrated and analyzed using Rietveld refinement. A reaction mechanism is proposed based on an evaluation of the weight fractions and scattering factors as a function of reaction time.

Consequences of exchange-site heterogeneity and dynamics on the UV-visible spectrum of Cu-exchanged SSZ-13

The speciation and structure of Cu ions and complexes in chabazite (SSZ-13) zeolites, which are relevant catalysts for nitrogen oxide reduction and partial methane oxidation, depend on material composition and reaction environment. Ultraviolet-visible (UV-Vis) spectra of Cu-SSZ-13 zeolites synthesized to contain specific Cu site motifs, together with ab initio molecular dynamics and time-dependent density functional theory calculations, were used to test the ability to relate specific spectroscopic signatures to specific site motifs. Geometrically distinct arrangements of two framework Al atoms in six-membered rings are found to exchange Cu2+ ions that become spectroscopically indistinguishable after accounting for the finite-temperature fluctuations of the Cu coordination environment. Nominally homogeneous single Al exchange sites are found to exchange a heterogeneous mixture of [CuOH]+ monomers, O- and OH-bridged Cu dimers, and larger polynuclear complexes. The UV-Vis spectra of the latter are sensitive to framework Al proximity, to precise ligand environment, and to finite-temperature structural fluctuations, precluding the precise assignment of spectroscopic features to specific Cu structures. In all Cu-SSZ-13 samples, these dimers and larger complexes are reduced by CO to Cu+ sites at 523 K, leaving behind isolated [CuOH]+ sites with a characteristic spectroscopic identity. The various mononuclear and polynuclear Cu2+ species are distinguishable by their different responses to reducing environments, with implications for their relevance to catalytic redox reactions.

Temperature-dependent dynamics of NH3-derived Cu species in the Cu-CHA SCR catalyst

In situ XAS and UV-vis–NIR spectroscopy shed light on Cu-speciation during NH₃ temperature-programmed desorption and surface reaction (TPSR) over a commercial Cu-chabazite deNO_x catalyst, expanding the fundamental knowledge required to unravel the NH₃-SCR mechanism across the whole operation-relevant temperature range.

Site selective adsorption and relocation of SOx in deactivation of Cu–CHA catalysts for NH3-SCR

SO₂ selectively interacts with Z-CuOH in Cu–CHA catalysts for NH₃-SCR and relocates to Z₂-Cu during heating at 550 °C.

Investigating the Low Temperature Formation of CuII -(N,O) Species on Cu-CHA Zeolites for the Selective Catalytic Reduction of NOx

In this work, we show the potentiality of operando FTIR spectroscopy to follow the formation of Cu^II -(N,O) species on Cu exchanged chabazite zeolites (Cu-CHA), active for the selective catalytic reduction of NO_x with NH₃ (NH₃ -SCR). In particular, we investigated the reaction of NO and O₂ at low temperature (200 and 50 °C) on a series of Cu-CHA zeolites with different composition (Si/Al and Cu/Al ratios), to investigate the nature of the formed copper nitrates, which have been proposed to be key intermediates in the oxidation part of the SCR cycle. Our results show that chelating bidentate nitrates are the main structures formed at 200 °C. At lower temperature a mixture of chelating and monodentate nitrates are formed, together with the nitrosonium ion NO⁺ , whose amount was found to be proportional to the zeolite Brønsted site concentration. Nitrates were found to mainly form with Cu^II ions stabilized by one negative framework charge (Z), Z-[Cu(OH]^I or Z-[Cu(O₂ ]^I , without involvement of Z₂ -Cu^II ones. This evidence, together with the absence of bridging nitrates in samples with high probability for Cu-Cu pairs, indicate that the nitrate ligands are not able to mobilize copper ions, at variance with what recently reported for NH₃ . Finally, water was found to replace preformed chelating copper nitrates and deplete NO⁺ (though with different kinetics) at both temperatures, while favouring the presence of monodentate ones.

Probing the Evolution of Palladium Species in Pd@MOF Catalysts during the Heck Coupling Reaction: An Operando X-ray Absorption Spectroscopy Study

The mechanism of the Heck C-C coupling reaction catalyzed by Pd@MOFs has been investigated using operando X-ray absorption spectroscopy (XAS) and powder X-ray diffraction (PXRD) combined with transmission electron microscopy (TEM) analysis and nuclear magnetic resonance (¹H NMR) kinetic studies. A custom-made reaction cell was used, allowing operando PXRD and XAS data collection using high-energy synchrotron radiation. By analyzing the XAS data in combination with ex situ studies, the evolution of the palladium species is followed from the as-synthesized to its deactivated form. An adaptive reaction mechanism is proposed. Mononuclear Pd(II) complexes are found to be the dominant active species at the beginning of the reaction, which then gradually transform into Pd nanoclusters with 13-20 Pd atoms on average in later catalytic turnovers. Consumption of available reagent and substrate leads to coordination of Cl^- ions to their surfaces, which causes the poisoning of the active sites. By understanding the deactivation process, it was possible to tune the reaction conditions and prolong the lifetime of the catalyst.