Redox-Active Ligand Assisted Multielectron Catalysis: A Case of Electrocatalyzed CO2-to-CO Conversion

The selective reduction of carbon dioxide remains a significant challenge due to the complex multielectron/proton transfer process, which results in a high kinetic barrier and the production of diverse products. Inspired by the electrostatic and H-bonding interactions observed in the second sphere of the [NiFe]-CODH enzyme, researchers have extensively explored these interactions to regulate proton transfer, stabilize intermediates, and ultimately improve the performance of catalytic CO2 reduction. In this work, a series of cobalt(II) tetraphenylporphyrins with varying numbers of redox-active nitro groups were synthesized and evaluated as CO2 reduction electrocatalysts. Analyses of the redox properties of these complexes revealed a consistent relationship between the number of nitro groups and the corresponding accepted electron number of the ligand at -1.59 V vs. Fc+/0. Among the catalysts tested, TNPPCo with four nitro groups exhibited the most efficient catalytic activity with a turnover frequency of 4.9 × 104 s-1 and a catalytic onset potential 820 mV more positive than that of the parent TPPCo. Furthermore, the turnover frequencies of the catalysts increased with a higher number of nitro groups. These results demonstrate the promising design strategy of incorporating multielectron redox-active ligands into CO2 reduction catalysts to enhance catalytic performance.

Azo-oximate metal-carbonyl to metallocarboxylic acid via the intermediate Ir(III) radical congener: quest for co-ligand driven stability of open- and closed-shell complexes

The redox non-innocent behavior of the diaryl-azo-oxime ligand L^NOH1 has been accentuated via the synthesis of metastable anion radical complexes of type trans-[Ir(L^NO˙-)Cl(CO)(PPh₃)₂] 2 (CO is trans to azo group of the ligand) by the oxidative coordination reaction of 1 with Vaska's complex. The stereochemical role of co-ligands vis-à-vis the interplay of π-bonding has been found to be decisive in controlling the aptitude of the coordinated redox non-innocent ligand to accept or reject an electron. This has been clarified via the isolation of quite a few complexes as well as the failure to synthesize some others. The oxidized analogues of type trans-[Ir(L^NO-)Cl(CO)(PPh₃)₂]⁺2+ (CO and azo group of the ligand are trans) as well as its cis isomer cis-[Ir(L^NO-)Cl(CO)(PPh₃)₂]⁺3+ (CO and azo group of the ligand are cis) have been structurally characterized but the radical anion congener of the latter could not be synthesized. Furthermore, the closed shell complexes [Ir(L^NO-)Cl₂(PPh₃)₂] 4 and [Ir(L^NO-)₂Cl(PPh₃)] 5 have been well characterized by diffraction as well as spectral techniques but their corresponding azo anion radical complexes could not be isolated and this is attributed to the trans influence of ancillary ligands. The anion radical complexes trans-[Ir(L^NO˙-)Cl(CO)(PPh₃)₂] 2 may be rapidly transformed to the metallocarboxylic acids trans-[Ir(L^NO-)Cl(CO₂H)(PPh₃)₂] 6via a proton-coupled electron transfer (PCET) process, thereby demonstrating the role of odd electron over the coordinated ligand framework to trigger metal-mediated carbonyl to carboxylic acid functionalization. Complexes 6 are further stabilized via intramolecular -CO₂H⋯ON- (carboxylic acid⋯oximato) H-bonding. The optoelectronic properties as well as the origin of transitions in the complexes were analyzed by TD-DFT and theoretical analysis, which further disclose that the odd electron in trans-[Ir(L^NO˙-)Cl(CO)(PPh₃)₂] 2 is primarily azo-oxime centric with very low contribution from the iridium center.

Structural and spectroscopic characterization of CO inhibition of [NiFe]-hydrogenase from Citrobacter sp. S-77

Hydrogenases catalyze the reversible oxidation of H2. Carbon monoxide (CO) is known to be a competitive inhibitor of O2-sensitive [NiFe]-hydrogenases. Although the activities of some O2-tolerant [NiFe]-hydrogenases are unaffected by CO, the partially O2-tolerant [NiFe]-hydrogenase from Citrobacter sp. S-77 (S77-HYB) is inhibited by CO. In this work, the CO-bound state of S77-HYB was characterized by activity assays, spectroscopic techniques and X-ray crystallography. Electron paramagnetic resonance spectroscopy showed a diamagnetic Ni2+ state, and Fourier-transform infrared spectroscopy revealed the stretching vibration of the exogenous CO ligand. The crystal structure determined at 1.77 Å resolution revealed that CO binds weakly to the nickel ion in the Ni-Fe active site of S77-HYB. These results suggest a positive correlation between O2 and CO tolerance in [NiFe]-hydrogenases.

Molecular Transition Metal Oxide Electrocatalysts for the Reversible Carbon Dioxide-Carbon Monoxide Transformation

Carbon monoxide dehydrogenase (CODH) enzymes are active for the reversible CO oxidation-CO₂ reduction reaction and are of interest in the context of CO₂ abatement and carbon-neutral solar fuels. Bioinspired by the active-site composition of the CODHs, polyoxometalates triply substituted with first-row transition metals were modularly synthesized. The polyanions, in short, {SiM₃ W₉ } and {SiM'₂ M''W₉ }, M, M', M''=Cu^II , Ni^II , Fe^III are shown to be electrocatalysts for reversible CO oxidation-CO₂ reduction. A catalytic Tafel plot showed that {SiCu₃ W₉ } was the most reactive for CO₂ reduction, and electrolysis reactions yielded significant amounts of CO with 98 % faradaic efficiency. In contrast, Fe-Ni compounds such as {SiFeNi₂ W₉ } preferably catalyzed the oxidation of CO to CO₂ similar to what is observed for the [NiFe]-CODH enzyme. Compositional control of the heterometal complexes, now and in the future, leads to control of reactivity and selectivity for CO₂ electrocatalytic reduction.

H2 activation by hydrogenase-inspired NiFe catalyst using frustrated Lewis pair: effect of buffer and halide ion in the heterolytic H-H bond cleavage

Hydrogen is a clean fuel alternative to fossil fuels, and it is vital to develop catalysts for its efficient activation and production. We investigate the reaction mechanism of H₂ activation in an aqueous solution by the recently developed NiFe complex (Ogo et al. Sci. Adv. 2020, 6, eaaz8181) using density functional theory (DFT) calculation. Our computational results showed that H₂ is activated using frustrated Lewis pair. That is, H₂ binds to the Fe site of the NiFe complex, acting as a Lewis acid, while the added buffer, acting as Lewis base, abstracts protons to form a hydride complex. Furthermore, the higher basicity in the proton abstraction reaction characterises reaction more exergonic and lowers the reaction barrier. In addition, in the proton abstraction by the water molecule, the reaction barrier was lowered when anion such as Cl⁻ is in the vicinity of the water. Understanding the chemical species that contribute to the catalytic process in cooperation with the metal catalyst at the atomic level should help to maximise the function of the catalyst.

Hydrogen is a clean fuel alternative to fossil fuels, and it is vital to develop catalysts for its efficient activation and production.

Identifying a Real Catalyst of [NiFe]-Hydrogenase Mimic for Exceptional H2 Photogeneration

Inspired by the natural [NiFe]-H₂ ase, we designed mimic 1, (dppe)Ni(μ-pdt)(μ-Cl)Ru(CO)₂ Cl to realize effective H₂ evolution under photocatalytic conditions. However, a new species 2 was captured in the course of photo-, electro-, and chemo- one-electron reduction. Experimental studies of in situ IR spectroscopy, EPR, NMR, X-ray absorption spectroscopy, and DFT calculations corroborated a dimeric structure of 2 as a closed-shell, symmetric structure with a Ru^I center. The isolated dimer 2 showed the real catalytic role in photocatalysis with a benchmark turnover frequency (TOF) of 1936 h^-1 for H₂ evolution, while mimic 1 worked as a pre-catalyst and evolved H₂ only after being reduced to 2. The remarkably catalytic activity and unique dimer structure of 2 operated in photocatalysis unveiled a broad research prospect in hydrogenases mimics for advanced H₂ evolution.

Selective Oxidation of H2 and CO by NiIr Catalyst in Aqueous Solution: A DFT Mechanistic Study

One of the challenges in utilizing hydrogen gas (H₂) as a sustainable fossil fuel alternative is the inhibition of H₂ oxidation by carbon monoxide (CO), which is involved in the industrial production of H₂ sources. To solve this problem, a catalyst that selectively oxidizes either CO or H₂ or one that co-oxidizes H₂ and CO is needed. Recently, a NiIr catalyst [Ni^IICl(X)Ir^IIICl(η⁵-C₅Me₅)], (X = N,N'-dimethyl-3,7-diazanonane-1,9-dithiolate), which efficiently and selectively oxidizes either H₂ or CO depending on the pH, has been developed (Angew. Chem. Int. Ed. 2017, 56, 9723-9726). In the present work, density functional theory (DFT) calculations are employed to elucidate the pH-dependent reaction mechanisms of H₂ and CO oxidation catalyzed by this NiIr catalyst. During H₂ oxidation, our calculations suggest that dihydrogen binds to the Ir center and generates an Ir(III)-dihydrogen complex, followed by subsequent isomerization to an Ir(V)-dihydride species. Then, a proton is abstracted by a buffer base, CH₃COO^-, resulting in the formation of a hydride complex. The catalytic cycle completes with electron transfer from the hydride complex to a protonated 2,6-dichlorobenzeneindophenol (DCIP) and a proton transfer from the oxidized hydride complex to a buffer base. The CO oxidation mechanism involves three distinct steps, i.e., (1) formation of a metal carbonyl complex, (2) formation of a metallocarboxylic acid, and (3) conversion of the metallocarboxylic acid to a hydride complex. The formation of the metallocarboxylic acid involves nucleophilic attack of OH^- to the carbonyl-C followed by a large structural change with concomitant cleavage of the Ir-S bond and rotation of the COOH group along the NiIr axis. During the conversion of the metallocarboxylic acid to the hydride complex, intramolecular proton transfer followed by removal of CO₂ leads to the formation of the hydride complexes. In addition, the barrier heights for the binding of small molecules (H₂, OH^-, H₂O, and CO) to Ir were calculated, and the results indicated that dissociation from Ir is a faster process than the binding of H₂O and H₂. These calculations indicate that H₂ oxidation is inhibited by CO and OH^- and thus prefers acidic conditions. In contrast, the CO oxidation reactions occur more favorably under basic conditions, as the formation of the metallocarboxylic acid involves OH^- attack to a carbonyl-C and the binding of OH^- to Ni largely stabilizes the triplet spin state of the complex. Taken together, these calculations provide a rationale for the experimentally observed pH-dependent, selective oxidations of H₂ and CO.

Reactive Heterobimetallic Complex Combining Divalent Ytterbium and Dimethyl Nickel Fragments

This article presented the synthesis and characterization of original heterobimetallic species combining a divalent lanthanide fragment and a divalent nickel center bridged by the bipyrimidine ligand, a redox-active ligand. X-ray crystal structures were obtained for the Ni monomer (bipym)NiMe₂, 1, as well as the heterobimetallic dimer compounds, Cp*₂Yb(bipym)NiMe₂, 2, along with ¹H solution NMR, solid-state magnetic data, and DFT calculations only for 1. The reactivity with CO was investigated on both compounds and the stoichiometric acetone formation is discussed based on kinetic and mechanistic studies. The key role of the lanthanide fragment was demonstrated by the relatively slow CO migratory insertion step, which indicated the stability of the intermediate.

Heterobimetallic [NiFe] Complexes Containing Mixed CO/CN- Ligands: Analogs of the Active Site of the [NiFe] Hydrogenases

The development of synthetic analogs of the active sites of [NiFe] hydrogenases remains challenging, and, in spite of the number of complexes featuring a [NiFe] center, those featuring CO and CN^- ligands at the Fe center are under-represented. We report herein the synthesis of three bimetallic [NiFe] complexes [Ni( N₂ S₂)Fe(CO)₂(CN)₂], [Ni( S₄)Fe(CO)₂(CN)₂], and [Ni( N₂ S₃)Fe(CO)₂(CN)₂] that each contain a Ni center that bridges through two thiolato S donors to a {Fe(CO)₂(CN)₂} unit. X-ray crystallographic studies on [Ni( N₂ S₃)Fe(CO)₂(CN)₂], supported by DFT calculations, are consistent with a solid-state structure containing distinct molecules in the singlet ( S = 0) and triplet ( S = 1) states. Each cluster exhibits irreversible reduction processes between -1.45 and -1.67 V vs Fc⁺/Fc and [Ni( N₂ S₃)Fe(CO)₂(CN)₂] possesses a reversible oxidation process at 0.17 V vs Fc⁺/Fc. Spectroelectrochemical infrared (IR) and electron paramagnetic resonance (EPR) studies, supported by density functional theory (DFT) calculations, are consistent with a Ni^IIIFe^II formulation for [Ni( N₂ S₃)Fe(CO)₂(CN)₂]⁺. The singly occupied molecular orbital (SOMO) in [Ni( N₂ S₃)Fe(CO)₂(CN)₂]⁺ is based on Ni 3d_z² and 3p S with the S contributions deriving principally from the apical S-donor. The nature of the SOMO corresponds to that proposed for the Ni-C state of the [NiFe] hydrogenases for which a Ni^IIIFe^II formulation has also been proposed. A comparison of the experimental structures, and the electrochemical and spectroscopic properties of [Ni( N₂ S₃)Fe(CO)₂(CN)₂] and its [Ni( N₂ S₃)] precursor, together with calculations on the oxidized [Ni( N₂ S₃)Fe(CO)₂(CN)₂]⁺ and [Ni( N₂ S₃)]⁺ forms suggests that the binding of the {Fe(CO)(CN)₂} unit to the {Ni(CysS)₄} center at the active site of the [NiFe] hydrogenases suppresses thiolate-based oxidative chemistry involving the bridging thiolate S donors. This is in addition to the role of the Fe center in modulating the redox potential and geometry and supporting a bridging hydride species between the Ni and Fe centers in the Ni-C state.