Observation and Identification of an Atomic Oxygen Structure on Catalytic Gold Nanoparticles

Partial Oxidation of Methanol on Gold: How Selectivity Is Steered by Low-Coordinated Sites

Partial methanol oxidation proceeds with high selectivity to methyl formate (MeFo) on nanoporous gold (npAu) catalysts. As low-coordinated sites on npAu were suggested to affect the selectivity, we experimentally investigated their role in the isothermal selectivity for flat Au(111) and stepped Au(332) model surfaces using a molecular beam approach under well-defined conditions. Direct comparison shows that steps enhance desired MeFo formation and lower undesired overoxidation. DFT calculations reveal differences in oxygen distribution that enhance the barriers to overoxidation at steps. Thus, these results provide an atomic-level understanding of factors controlling the complex reaction network on gold catalysts, such as npAu.

Single-Particle Spectroelectrochemistry: Promoting the Electrocatalytic Activity of Gold Nanorods via Oxygen Plasma Treatment without Structural Deformation

Understanding of the electrocatalytic activity enhancement in gold nanoparticles is still limited. Herein, we present the effect of the oxygen plasma treatment on the electrochemical activity of gold nanorods (AuNRs). Oxygen plasma treatment resulted in the blueshift and line width narrowing of the localized surface plasmon resonance (LSPR) spectra obtained from individual AuNRs immobilized on an indium tin oxide (ITO) surface. These changes can be attributed to increases in the surface charges of the AuNRs. The formation of a Au-ITO heterojunction provided structural stability to the immobilized AuNRs regardless of the duration of oxygen plasma exposure. The electrocatalytic oxidation of hydrogen peroxide (H2O2) was induced by increases in the free-electron densities on the surfaces of these AuNRs owing to oxygen plasma treatment, and Au did not dissolve under the experimental conditions. However, the potential-dependent LSPR spectra of the individual AuNRs showed similar patterns of LSPR behavior, irrespective of the duration of oxygen plasma treatment and the concentration of H2O2. Therefore, this study based on single-particle spectroelectrochemistry and cyclic voltammetry improves the understanding of the role of oxygen plasma treatment in promoting the catalytic activity of structurally stable AuNRs immobilized on an ITO surface.

Degradation and fate of 2,4-dinitroanisole (DNAN) and its intermediates treated with Mg/Cu bimetal: Surface examination with XAS, DFT, and LDI-MS

A novel Mg-based bimetal reagent (Mg/Cu) was used as an enhanced reductive system to degrade insensitive munition 2,4-dinitroanisole (DNAN), a contaminant found in energetic-laden waste. Degradation of DNAN was significantly impacted by dissolved oxygen and studied in anoxic and oxic bimetal systems (i.e., purging with N₂, air, or O₂ gas). Degradation occurred through sequential nitroreduction: first one nitro group was reduced (ortho or para) to form short-lived intermediates 2-amino-4-nitroanisole or 4-amino-2-nitroanisole (2-ANAN or 4-ANAN), and then subsequent reduction of the other nitro group formed 2,4-diaminoanisole (DAAN). The nitro-amino intermediates demonstrated regioselective reduction in the ortho position to 2-ANAN; Regioselectivity was also impacted by the anoxic/oxic environment. Under O₂-purging DNAN degradation rate was slightly enhanced, but most notably O₂ significantly accelerated DAAN generation. DAAN also further degraded only in the oxygenated Mg/Cu system. Adsorption of DNAN byproducts to the reagent occurred regardless of anoxic/oxic condition, resulting in a partition of carbon mass between the adsorbed phase (27%-35%) and dissolved phase (59%-72%). Additional surface techniques were applied to investigate contaminant interaction with Cu. Density functional theory (DFT) calculations identified preferential adsorption structures for DNAN on Cu with binding through two O atoms of one or both nitro groups. X-ray absorption spectroscopy (XAS) measurements determined the oxidation state of catalytic metal Cu and formation of a Cu-O-N bond during treatment. Laser desorption ionization mass spectrometry (LDI-MS) measurements also identified intermediate 2-ANAN adsorbed to the bimetal surface.

Spectroscopic observation and structure-insensitivity of hydroxyls on gold

The O-H stretching vibration of surface hydroxyls remained at 3691 cm^-1 for gold structures ranging in size from clusters to nanoparticles, to non-flat bulk surfaces. In contrast, this vibration was not observed on flat gold surfaces. Therefore, this vibration can serve as an indicator of the roughness of the gold surface and associated functional properties, such as catalytic activity.

Au-on-Ag nanostructure forin-situSERS monitoring of catalytic reactions

Dual-functionality Au-on-Ag nanostructures (AOA) were fabricated on a silicon substrate by first immobilizing citrate-reduced Ag nanoparticles (Ag NPs, ∼43 nm in diameter), followed by depositing ∼7 nm Au nanofilms (Au NFs) via thermal evaporation. Au NFs were introduced for their catalytic activity in concave-convex nano-configuration. Ag NPs underneath were used for their significant enhancement factor (EF) in surface-enhanced Raman scattering (SERS)-based measurements of analytes of interest. Rhodamine 6G (R6G) was utilized as the Raman-probe to evaluate the SERS sensitivity of AOA. The SERS EF of AOA is ∼37 times than that of Au NPs. Using reduction of 4-nitrothiophenol (4-NTP) by sodium borohydride (NaBH₄) as a model reaction, we demonstrated the robust catalytic activity of AOA as well as its capacity to continuously monitor via SERS the disappearance of reactant 4-NTP, emergence and disappearance of intermediate 4,4'-DMAB, and the appearance of product 4-ATP throughout the reduction process in real-time andin situ.

Atomic, Molecular and Hybrid Oxygen Structures on Silver

Interactions between oxygen and silver are important in many areas of science and technology, including materials science, medical, biomedical and environmental applications, spectroscopy, photonics, and physics. In the chemical industry, identification of oxygen structures on Ag catalysts is important in the development of environmentally friendly and sustainable technologies that utilize gas-phase oxygen as the oxidizing reagent without generating byproducts. Gas-phase oxygen adsorbs on Ag atomically by breaking the O-O bond and molecularly by preserving the O-O bond. Atomic O structures have Ag-O vibrations at 240-500 cm^-1. Molecular O₂ structures have O-O vibrations at significantly higher values of 870-1150 cm^-1. In this work, we identify hybrid atomic-molecular oxygen structures, which form when one adsorbed O atom reacts with one lattice O atom on the surface or in the subsurface of Ag. Thus, these hybrid structures require dissociation of adsorbed molecular oxygen into O atoms but still possess the O-O bond. The hybrid structures have O-O vibrations at 600-810 cm^-1, intermediate between the Ag-O vibrations of atomic oxygen and the O-O vibrations of molecular oxygen. The hybrid O-O structures do not form by a recombination of two adsorbed O atoms because one of the O atoms in the hybrid structure must be embedded into the Ag lattice. The hybrid oxygen structures are metastable and, therefore, serve as active species in selective oxidation reactions on Ag catalysts.

Spectroscopically clean Au nanoparticles for catalytic decomposition of hydrogen peroxide

Au nanoparticles synthesized from colloidal techniques have the capability in many applications such as catalysis and sensing. Au nanoparticles function as both catalyst and highly sensitive SERS probe can be employed for sustainable and green catalytic process. However, capping ligands that are necessary to stabilize nanoparticles during synthesis are negative for catalytic activity. In this work, a simple effective mild thermal treatment to remove capping ligands meanwhile preserving the high SERS sensitivity of Au nanoparticles is reported. We show that under the optimal treatment conditions (250 °C for 2 h), 50 nm Au nanoparticles surfaces are free from any capping molecules. The catalytic activity of treated Au nanoparticles is studied through H₂O₂ decomposition, which proves that the treatment is favorable for catalytic performance improvement. A reaction intermediate during H₂O₂ decomposition is observed and identified.

Acetic Acid Adsorption and Reactions on Ni(110)

Acetic acid adsorption and reactions at multiple surface coverage values on Ni(110) were studied with temperature-programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRAS) at 90-500 K. The experimental measurements were interpreted with density functional theory (DFT) calculations that provided information on adsorbate geometries, energies, and vibrational modes. Below the monolayer saturation coverage of 0.36 ML at 90 K, acetic acid adsorbs mostly molecularly. Above this coverage, a physisorbed layer is formed with dimers and catemers, without detectable monomers. Dimers and catemers desorb as molecular acetic acid at 157 and 172 K, respectively. Between 90 and 200 K, the O-H bond in acetic acid breaks to form bridge-bonded bidentate acetate that becomes the dominant surface species. Desorption-limited hydrogen evolution is observed at 265 K. However, even after the acetate formation, acetic acid desorbs molecularly at 200-300 K due to recombination. Minor surface species observed at 200 K, acetyls or acetates with a carbonyl group, decompose below 350 K and generate adsorbed carbon monoxide. At 350 K, the surface likely undergoes restructuring, the extent of which increases with acetic acid coverage. The initial dominant bridge-bonded bidentate acetate species formed below 200 K remain on the surface, but they now mostly adsorb on the restructured sites. The acetates and all other remaining hydrocarbon species decompose simultaneously at 425 K in a narrow temperature range with concurrent evolution of hydrogen, carbon monoxide, and carbon dioxide. Above 425 K, only carbon remains on the surface.

The Bioactive Core and Corona Synergism of Quantized Gold Enables Slowed Inflammation and Increased Tissue Regeneration in Wound Hypoxia

The progress of wound regeneration relies on inflammation management, while neovascular angiogenesis is a critical aspect of wound healing. In this study, the bioactive core and corona synergism of quantized gold (QG) were developed to simultaneously address these complicated issues, combining the abilities to eliminate endotoxins and provide oxygen. The QG was constructed from ultrasmall nanogold and a loosely packed amine-based corona via a simple process, but it could nonetheless eliminate endotoxins (a vital factor in inflammation also called lipopolysaccharides) and provide oxygen in situ for the remodeling of wound sites. Even while capturing endotoxins through electrostatic interactions, the catalytic active sites inside the nanogold could maintain its surface accessibility to automatically transform the overexpressed hydrogen peroxide in hypoxic wound regions into oxygen. Since the inflammatory stage is an essential stage of wound healing, the provision of endotoxin clearance by the outer organic corona of the QG could slow inflammation in a way that subsequently promoted two other important stages of wound bed healing, namely proliferation and remodeling. Relatedly, the efficacy of two forms of the QG, a liquid form and a dressing form, was demonstrated at wound sites in this study, with both forms promoting the development of granulation, including angiogenesis and collagen deposition. Thus, the simply fabricated dual function nanocomposite presented herein not only offers reduced batch-to-batch variation but also increased options for homecare treatments.

Nanostructured sapphire optical fiber embedded with Au nanorods for high-temperature plasmonics in harsh environments

Sensors for harsh environments must exhibit robust sensing response and considerable thermal and chemical stability. We report the exploration of a novel all-alumina nanostructured sapphire optical fiber (NSOF) embedded with Au nanorods (Au NRs) for plasmonics-based sensing at high temperatures. Temperature dependence of the localized surface plasmon resonance (LSPR) of Au NRs was studied in conjunction with numerical calculations using the Drude model. It was found that LSPR of Au NRs changes markedly with temperature, red shifting and increasing in transmission amplitude as the temperature increases. Furthermore, this variation is highly localized through tunneling by overlapping the near-field of thin cladding and sapphire optical fiber. The NSOF embedded with Au NRs has the potential for sensing in advanced energy generation systems.

Plasmonic Au nanorods stabilized within anodic aluminum oxide pore channels against high-temperature treatment

Au nanorods (Au NRs) are promising candidates for sensing applications due to their tunable localized surface plasmon resonance wavelength. At temperatures above 250 °C, however, these structures are morphologically unstable and tend to evaporate. We herein report a novel refractory plasmonic nanocomposite system comprising Au NRs entrapped in anodized aluminum oxide (AAO) scaffolds that are stable up to 800 °C. Au NRs were synthesized in the cylindrical pores of sapphire-supported AAO via in situ electroless deposition on catalytic Au nanoparticles (Au NPs) anchored on the pore walls. The morphological characteristics and surface-enhanced Raman scattering (SERS) functionality of Au NRs before and after heat treatment were evaluated using SEM, XRD and Raman spectroscopy. Compared to unconfined Au NRs that evolved into spherical particles at temperatures below 250 °C and subsequently evaporated from the substrate surface, the morphology of Au NRs in AAO was preserved upon heat treatment at temperatures up to 800 °C. Furthermore, by tuning the AAO scaffolds thickness and pore diameter, the aspect ratio (AR) of the entrapped Au NRs was varied from 2.4 to 7.8. The SERS sensitivity of Au NRs in AAO was found to increase with decreasing AR when the incident light was parallel to the rod longitudinal axis, in close agreement with the calculated fourth power of the local electromagnetic field using the finite-difference time domain method.