Self-Assembly of Chiral Gold Clusters into Crystalline Nanocubes of Exceptional Optical Activity

Atomically Precise Chiral Metal Nanoclusters for Circularly Polarized Light Detection

Circularly polarized light (CPL) detection is of great significance in various applications such as drug identification, sensing and imaging. Atomically precise chiral metal nanoclusters with intense circular dichroism (CD) signals are promising candidates for CPL detection, which can further facilitate device miniaturization and integration. Herein, we report the preparation of a pair of optically active chiral silver nanoclusters [Ag7(R/S-DMA)2(dpppy)3] (BF4)3 (R/S-Ag7) for direct CPL detection. The crystal structure and molecular formula of R/S-Ag7 clusters are confirmed by single-crystal X-ray diffraction and high-resolution mass spectrometry. R/S-Ag7 clusters exhibit strong CD spectra and CPL both in solution and solid states. When used as the photoactive materials in photodetectors, R/S-Ag7 enables effective discrimination between left-handed circularly polarized and right-handed circularly polarized light at 520 nm with short response time, high responsivity and considerable discrimination ratio. This study is the first report on using atomically precise chiral metal nanoclusters for CPL detection.

The interplay of chromophore-spacer length in light-induced gold nanocluster self-assembly

The light-induced self-assembly of chromophore-tethered precision nanoclusters (NCs) has recently received significant attention due to their facile control over structure, function, and reversibility under ambient conditions. However, the magnitude of assembly depends on the photoswitching efficiency, chemical structure, and proximity of the chromophore to the NC surface. Herein, using azobenzene alkyl monothiol (AMT)-capped gold NCs with two different spacer lengths (denoted as C3-NC and C9-NC), we show that reversible cis ↔ trans isomerization efficiency can be readily tuned to control the self-assembly kinetics of NCs. Irrespective of the chain length, the time required for trans-to-cis (140 s) and cis-to-trans (260 s) isomerization of individual C3-AMT and C9-AMT is identical in dichloromethane solution. When a similar experiment was performed using a solution of C3-NCs and C9-NCs, it resulted in self-assembled disc-like superstructures. Notably, the trans-to-cis photoswitching in C3-NC could reach only 65% even after 460 seconds of irradiation. On the other hand, C9-NC completed this process within 160 seconds of irradiation. The low photoswitching efficiency of the C3-NC analog is due to the short and rigid spacer length of C3-AMT ligands, which are in close proximity to the NC surface, resulting in steric hindrance experienced at the NC-chromophore interface. Importantly, the slow photoswitching in C3-NCs helps isolate and investigate the intermediates of assembly. Using high-resolution electron microscopy, atomic force microscopy, and 3D reconstruction, we show that the discs are made up of densely packed arrays of NCs. The prolonged illumination of C9-NCs results in a chain-like assembly due to the dipolar attraction between the previously assembled superstructures. The efficient photoisomerization of chromophores located away from the nanocluster surface has been identified as the key element to speed up the light-induced assembly in chromophore-tethered nanoclusters. Such information will be useful while developing nanoscale photoswitches for electrochemistry, biosensors, and electronic devices.

BINOL-Based Chiral Macrocycles and Cages

Chirality, a fundamental principle in chemistry, biology, and medicine, is prevalent in nature and in organisms. Chiral molecules, such as DNA, RNA, and proteins, are crucial in biomolecular synthesis, as well as in the development of functional materials. Among these, 1,1'-binaphthyl-2,2'-diol (BINOL) stands out for its stable chiral configuration, versatile functionality, and commercial availability. BINOL is widely employed in asymmetric catalysis and chiral materials. This review mainly focuses on recent research over the past five years concerning the use of BINOL derivatives for constructing chiral macrocycles and cages. Their contributions to chiral luminescence, enantiomeric separation, transmembrane transport, and asymmetric catalysis were examined.

Flexible Full-Inorganic Ultrathin Films with Stable Circularly Polarized Luminescence Covering the Visible to Near-Infrared Region

Circularly polarized luminescence (CPL) materials hold significant value in various fields, including information storage, secure communication, three-dimensional displays, biological detection, and optoelectronic devices. Using the Langmuir-Schaeffer (LS) assembly technique, we successfully construct a series of large-area flexible optical ultrathin films. Impressively, the inorganic assembled ultrathin films exhibit excellent CPL optical activity covering the visible to near-infrared (NIR) region, with the luminescence asymmetry factor glum ranging from 0.59 to 0.72. Moreover, such ultrathin films also display outstanding mechanical flexibility, the optical activity of which even after 240 bending cycles shows almost no difference compared to the unbent samples. Owing to the ultra-broadband optical activity and ultra-stable optical activity of such full-inorganic assembled materials on flexible substrates, coupled with their excellent processability and outstanding mechanical flexibility, we anticipate they will find use in many fields such as communication technology and flexible optoelectronics.

Circular dichroism and circularly polarized luminescence of ligand-protected molecular metal clusters: insights into structure-chiroptical property relationships

Molecular noble metal clusters are an emerging class of circularly polarized luminescent (CPL) nanomaterials. Many of the ligand-protected metal clusters exhibit discrete electronic absorption bands, which are assigned to their structural components such as metal core, ligands and metal-ligand interfaces. This implies the suitability of the chiroptical spectroscopic approach to unravel the structure-chiroptical property relationships in molecular metal clusters. Due to the tremendous developments in computational methods for investigating chiroptical properties, along with circular dichroism (CD) and CPL spectroscopy, understanding of the structure-chiroptical properties of these clusters is rapidly progressing. This review discusses various strategies such as the use of chiral ligands, metal atom substitution, ligand exchange, co-crystallization with chiral ligands, etc., for inducing and enhancing the CPL of such metal clusters. This review demonstrates the potential of combined CD-CPL spectroscopic investigations and theoretical calculations to unravel the origins of photoluminescence and CPL activity of chiral metal clusters.

Assemble-Disassemble-Reassemble Dynamics in Copper Nanocluster-Based Superstructures

Assembling metal nanoclusters (MNCs) to form superstructures generates exciting photophysical properties distinct from those of their discrete precursors. Controlling the assembly process of MNCs and understanding the assembly-disassembly dynamics can have implications in achieving the reversible self-assembly of MNCs. The formation of self-assembled copper nanoclusters (CuNCs) as homogeneous superstructures and the underlying mechanisms governing such a process remain unexplored. Smart molecular imprinting of surface ligands can establish the forces necessary for the formation of such superstructures. Herein, we report highly luminescent, ordered superstructures of 4-phenylimidazole-2-thiol (4-PIT)-protected CuNCs with the help of l-ascorbic acid as a secondary ligand. Through a comprehensive spectroscopic analysis, we deciphered the mechanism of the self-assembly process, where the role of interligand H-bonding and C-H-π interactions was established. Notably, efficient reversibility of assembly-disassembly was demonstrated by re-establishing the interligand interactions and regenerating their photophysical and morphological signatures.

Assembly of Homochiral Aluminum Oxo Clusters for Circularly Polarized Luminescence

Chiral aluminum oxo clusters (cAlOCs) are distinguished from other classes of materials on account of their abundance in the earth's crust and their potential for sustainable development. However, the practical synthesis of cAlOCs is rarely known. Herein, we adopt a synergistic coordination strategy by using chiral amino acid ligands as bridges and auxiliary pyridine-2,6-dicarboxylic acid as chelating ligands and successfully isolate an extensive family of cAlOCs. They integrate molecular chirality, absolute helicity, and intrinsic hydrogen-bonded chiral topology. Moreover, they have the structural characteristics of one-dimensional channels and replaceable counteranions, which make them well combined with fluorescent dyes for circularly polarized luminescence (CPL). The absolute luminescence dissymmetry factor (glum) of up to the 10-3 order is comparable to several noble metals, revealing the enormous potential of cAlOCs in low-cost chiral materials. We hope this work will inspire new discoveries in the field of chirality and provide new opportunities for constructing low-cost chiral materials.

Application of gold nanoclusters in fluorescence sensing and biological detection

Gold nanoclusters (Au NCs) exhibit broad fluorescent spectra from visible to near-infrared regions and good enzyme-mimicking catalytic activities. Combined with excellent stability and exceptional biocompatibility, the Au NCs have been widely exploited in biomedicine such as biocatalysis and bioimaging. Especially, the long fluorescence lifetime and large Stokes shift attribute Au NCs to good probes for fluorescence sensing and biological detection. In this review, we systematically summarized the molecular structure and fluorescence properties of Au NCs and highlighted the advances in fluorescence sensing and biological detection. The Au NCs display high sensitivity and specificity in detecting iodine ions, metal ions, and reactive oxygen species, as well as certain diseases based on the fluorescence activities of Au NCs. We also proposed several points to improve the practicability and accelerate the clinical translation of the Au NCs.

Metal Clusters Confined in Chiral Zeolitic Imidazolate Framework for Circularly Polarized-Luminescence Inks

Chiroptical activities arising in nanoclusters (NCs) are emerging as one of the most dynamic areas of modern science. However, devising an overarching strategy that is capable of concurrently enhancing the photoluminescence (PL) and circularly polarized luminescence (CPL) of metal NCs remains a formidable challenge. Herein, gold and silver nanoclusters (AuNCs, AgNCs) are endowed with CPL, for the first time, through a universal host-guest approach─centered around perturbing a chiral microenvironment within chiral hosts, simultaneously enhancing emissions. Remarkably, the photoluminescence quantum yield (PLQY) of AuNCs has undergone an increase of over 200 times upon confinement, escalating from 0.05% to 12%, and demonstrates a CPL response. Moreover, a three-dimensional (3D) model termed "NCs@CMOF" featuring CPL activity is created using metal cluster-based assembly inks through the process of 3D printing. This work introduces a potentially straightforward and versatile approach for achieving both PL enhancement and CPL activities in metal clusters.

Kinetically Controlled Structural Modulation of the Self-Assembled Silver Nanoclusters

Metal nanoclusters (NCs) with atomic precision are growing into a fascinating class of building blocks for supramolecular chemistry. What makes it more interesting is the enhanced optical properties of the ordered structures, including aggregation-induced emission (AIE). However, algorithm dictating the self-assembly of metal NCs in multicomponent environment remains largely unknown, and effective means to manipulate the self-assembly is still lacking, especially under kinetic control. Herein, nanofibers which contain sub-1 nm nanowires and exhibit circularly polarized phosphorescence (CPP) are obtained from crystallization-induced self-assembly (CISA) of water-soluble, negatively charged silver NCs (Ag9 -NCs) in the presence of glutamic acid (Glu). By the introduction of a positively-charged additive (choline chloride, CC), the structure of the nanowires is modulated and the lateral interaction between adjacent nanofibers is adjusted, leading to simultaneous improvement of the phosphorescence and chirality which finally enhances CPP. Importantly, changing the time at which CC is introduced altered the kinetic pathway of the CISA, which enables to effectively manipulate both the final structures of the self-assembled Ag9 -NCs and the output of the optical signals.

Symmetry breaking of highly symmetrical nanoclusters for triggering highly optical activity

Developing new approaches to fulfill the enantioseparation of nanocluster racemates and construct cluster-based nanomaterials with optical activity remains highly desired in cluster science, because it is an essential prerequisite for fundamental research and extensive applications of these nanomaterials. We herein propose a strategy termed "active-site exposing and partly re-protecting" to trigger the symmetry breaking of highly symmetrical nanoclusters and to render cluster crystals optically active. The vertex PPh3 of the symmetrical Ag29(SSR)12(PPh3)4 (SSR = 1, 3-benzenedithiol) nanocluster was firstly dissociated in the presence of counterions with large steric hindrance, and then the exposed Ag active sites of the obtained Ag29(SSR)12 nanocluster were partly re-protected by Ag+, yielding an Ag29(SSR)12-Ag2 nanocluster with a symmetry-breaking construction. Ag29(SSR)12-Ag2 followed a chiral crystallization mode, and its crystal displayed strong optical activity, derived from CD and CPL characterizations. Overall, this work presents a new approach (i.e., active-site exposing and partly re-protecting) for the symmetry breaking of highly symmetrical nanoclusters, the enantioseparation of nanocluster racemates, and the achievement of highly optical activity.

High-Efficiency Pure Blue Circularly Polarized Phosphorescence from Chiral N-Heterocyclic-Carbene-Stabilized Copper(I) Clusters

Circularly polarized luminescence (CPL) materials have attracted considerable attention for their promising applications in encryption, chiral sensing, and three-dimensional (3D) displays. However, the preparation of high-efficiency, pure blue CPL materials remains challenging. In this study, we reported an enantiomeric pair of triangle copper(I) clusters (R/S-Cu3) rigidified by employing chiral N-heterocyclic carbene (NHC) ligands with two pyridine-functionalized wingtips. These chiral clusters emitted pure blue phosphorescence that overlapped with that of the commercial blue phosphor having Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of (0.14, 0.10), and the films exhibited an unprecedented photoluminescence quantum yield (PLQY) of ∼70.0%. Additionally, the solutions showed very bright circularly polarized phosphorescence (CPP) with a dissymmetry factor of ±2.1 × 10-3. The excellent solubility and photostability endowed these pure-blue-emitting chiral clusters with promising applications as pure blue CPP inks for 3D printing white objects, such as precise-atomic-enlarged models of metal clusters and a lovely white stereoscopic "rabbit". The intricate mechanism underlying blue phosphorescence in this small cluster and across various states is elucidated through a comprehensive approach that integrates thorough analysis of luminescence properties, controlled experiments, and theoretical calculations. For the first time, we propose that the dominant high-energy emission center is constituted by delocalized hybrid orbitals over multiple atomic centers, encompassing both the metal and the coordinated atoms. This challenges stereotypical assumptions that the cluster center solely supports low-energy emissions. This work expands the currently limited range of CPP functional materials and provides a new direction for CPP applications involving NHC-stabilized metal clusters.

Solvation-Mediated Self-Assembly from Crystals to Helices of Protic Acyclic Carbene AuI -Enantiomers with Chirality Amplification

Constructing chiral supramolecular assembly and exploring the underlying mechanism are of great significance in promoting the development of circularly polarized luminescence (CPL)-active materials. Herein, we report a solvation-mediated self-assembly from single-crystals to helical nanofibers based on the first protic acyclic (methoxy)(amino)carbenes (pAMACs) AuI -enantiomers driven by a synergetic aurophilic interactions and H-bonds. Their aggregation-dependent thermally activated delayed fluorescence properties with high quantum yields (ΦFL ) up to 95 % were proved to be attributed to packing modes of Au⋅⋅⋅Au dimers with π-stacking or one-dimensional extended Au⋅⋅⋅Au chains. Via drop-casting method, supramolecular P- or M-helices were prepared. Detailed studies on the helices demonstrate that formations of extended helical Au⋅⋅⋅Au molecular chains amplify supramolecular chirality, leading to strong CPL with high dissymmetry factor (|glum |=0.030, ΦFL =67 %) and high CPL brightness (BCPL ) of 4.87×10-3 . Our findings bring new insights into the fabrication of helical structures to improve CPL performance by modifying aurophilic interactions.

Hyperconjugative Aromaticity-Based Circularly Polarized Luminescence Enhancement in Polyaurated Heterocycles

Hyperconjugative aromaticity (HA) frequently appears in metalla-aromatics, but its effect on photophysical properties remains unexplored to date. Herein, we reveal two different HA scenarios in nearly isostructural triaurated indolium and benzofuranylium compounds. The biased HAs show a discernible effect on the spatial arrangement of metal atoms and thus tailor metal parentage in frontier orbitals and the HOMO-LUMO energy gap. Theoretical calculations and structural analyses demonstrate that HA not only influences the degree of electron delocalization over the trimetalated aromatic rings but also affects π-coordination of Au(I) and intercluster aurophilic interaction. Consequently, the triaurated benzofuranylium complex shows better photoluminescence performance (quantum yield up to 49.7%) over the indolium analogue. Furthermore, four pairs of axially chiral bibenzofuran-centered trinuclear and hexanuclear gold clusters were purposefully synthesized to correlate their HA-involved structures with the chiroptical response. The triaurated benzofuranylium complexes exhibit strong circular dichroism (CD) response in solution but CPL silence even in solid film. In contrast, the hexa-aurated homologues display strong CD and intense CPL signals in both aggregated state and solid film (luminescence anisotropy factor glum up to 10-3). Their amplified chiroptical response is finally ascribed to the dominant intermolecular exciton couplings of large assemblies formed through the HA-tailored aggregation of hexanuclear compounds.

Quantifying Nanoparticle Layer Topography: Theoretical Modeling and Atomic Force Microscopy Investigations

A comprehensive method consisting of theoretical modeling and experimental atomic force microscopy (AFM) measurements was developed for the quantitative analysis of nanoparticle layer topography. Analytical results were derived for particles of various shapes such as cylinders (rods), disks, ellipsoids, hemispheres (caps), etc. It was shown that for all particles, their root-mean-square (rms) parameter exhibited a maximum at the coverage about 0.5, whereas the skewness was a monotonically decreasing function of the coverage. This enabled a facile determination of the particle coverage in the layer, even if the shape and size were not known. The validity of the analytical results was confirmed by computer modeling and experimental data acquired by AFM measurements for polymer nanoparticle deposition on mica and silica. The topographical analysis developed in this work can be exploited for a quantitative characterization of self-assembled layers of nano- and bioparticles, e.g., carbon nanotubes, silica and noble metal particles, DNA fragments, proteins, vesicles, viruses, and bacteria at solid surfaces. The acquired results also enabled a proper calibration, in particular the determination of the measurement precision, of various electron and scanning probe microscopies, such as AFM.

Chiral Hydride Cu18 Clusters Transform to Superatomic Cu15Ag4 Clusters: Circularly Polarized Luminescence Lighting

The manipulation of metal cluster enantiomers and their reconstruction remain challenging. Here, for the first time, we report an enantiomeric pair of hydride copper clusters [Cu18H(R/S-PEA)12](BF4)5 (R/S-Cu18H) made using designed chiral ligands. By manipulation of R/S-Cu18H with Ag+ ions, H- ions are released, leading to the reconstruction of 15 Cu atoms. Moreover, 4 Ag atoms replaced Cu atoms at the specific sites, resulting in the formation of homochiral [Cu15Ag4(R/S-PEA)12](BF4)5 (R/S-Cu15Ag4) with an isomorphic metal skeleton. This process was accompanied by a reduction reaction generating two free valence elections in the chiral alloying counterparts, which displayed orange emission. The solid-state R/S-Cu15Ag4 exhibited a photoluminescence quantum yield of 7.02% and excellent circularly polarized luminescence. The chiral transformations were resolved by single-crystal X-ray diffraction. The development of chiral copper hydride precursor-based metal clusters with chiroptical activities holds tremendous promise for advancing the field of optoelectronics and enabling new applications in lighting, displays, and beyond.

Circular Polarized Light Emission in Chiral Inorganic Nanomaterials

Chiral inorganic nanostructures strongly interact with photons changing their polarization state. The resulting circularly polarized light emission (CPLE) has cross-disciplinary importance for a variety of chemical/biological processes and is essential for development of chiral photonics. However, the polarization effects are often complex and their interpretation is dependent on the several structural parameters of the chiral nanostructure. CPLE in nanostructured media has multiple origins and several optical effects are typically convoluted into a single output. Analyzing CPLE data obtained for nanoclusters, nanoparticles, nanoassemblies, and nanocomposites from metals, chalcogenides, perovskite, and other nanostructures, it is shown here that there are several distinct groups of nanomaterials for which CPLE is dominated either by circularly polarized luminescence (CPL) or circularly polarized scattering (CPS); there are also many nanomaterials for which they are comparable. The following points are also demonstrated: 1) CPL and CPS contributions involve light-matter interactions at different structural levels; 2) contribution from CPS is especially strong for nanostructured microparticles, nanoassemblies, and composites; and 3) engineering of materials with strongly polarized light emission requires synergistic implementation of CPL and CPS effects. These findings are expected to guide development of CPLE materials in a variety of technological fields, including 3D displays, information storage, biosensors, optical spintronics, and biological probes.

Magnetically Induced Anisotropic Interaction in Colloidal Assembly

The wide accessibility to nanostructures with high uniformity and controllable sizes and morphologies provides great opportunities for creating complex superstructures with unique functionalities. Employing anisotropic nanostructures as the building blocks significantly enriches the superstructural phases, while their orientational control for obtaining long-range orders has remained a significant challenge. One solution is to introduce magnetic components into the anisotropic nanostructures to enable precise control of their orientations and positions in the superstructures by manipulating magnetic interactions. Recognizing the importance of magnetic anisotropy in colloidal assembly, we provide here an overview of magnetic field-guided self-assembly of magnetic nanoparticles with typical anisotropic shapes, including rods, cubes, plates, and peanuts. The Review starts with discussing the magnetic energy of nanoparticles, appreciating the vital roles of magneto-crystalline and shape anisotropies in determining the easy magnetization direction of the anisotropic nanostructures. It then introduces superstructures assembled from various magnetic building blocks and summarizes their unique properties and intriguing applications. It concludes with a discussion of remaining challenges and an outlook of future research opportunities that the magnetic assembly strategy may offer for colloidal assembly.

Protein-Templated Metal Nanoclusters: Molecular-like Hybrids for Biosensing, Diagnostics and Pharmaceutics

The use of proteins as biomolecular templates to synthesize atomically precise metal nanoclusters has been gaining traction due to their appealing properties such as photoluminescence, good colloidal- and photostability and biocompatibility. The synergistic effect of using a protein scaffold and metal nanoclusters makes it especially attractive for biomedical applications. Unlike other reviews, we focus on proteins in general as the protective ligand for various metal nanoclusters and highlight their applications in the biomedical field. We first introduce the approaches and underlined principles in synthesizing protein-templated metal nanoclusters and summarize some of the typical proteins that have been used thus far. Afterwards, we highlight the key physicochemical properties and the characterization techniques commonly used for the size, structure and optical properties of protein-templated metal nanoclusters. We feature two case studies to illustrate the importance of combining these characterization techniques to elucidate the formation process of protein-templated metal nanoclusters. Lastly, we highlight the promising applications of protein-templated metal nanoclusters in three areas-biosensing, diagnostics and therapeutics.

Asymmetric transformation of achiral gold nanoclusters with negative nonlinear dependence between chiroptical activity and enantiomeric excess

The investigation of chirality at the nanoscale is important to bridge the gap between molecular and macroscopic chirality. Atomically precise metal nanoclusters provide an ideal platform for this research, while their enantiopure preparation poses a challenge. Here, we describe an efficient approach to enantiopure metal nanoclusters via asymmetric transformation, that is, achiral Au₂₃(SC₆H₁₁)₁₆ nanoclusters are converted into chiral and enantiopure Au₂₄(L)₂(SC₆H₁₁)₁₆ nanoclusters by a chiral inducer phosphoramidite (L). Two enantiomers of Au₂₄(L)₂(SC₆H₁₁)₁₆ are obtained and the crystal structures reveal their hierarchical chirality, which originates from the two introduced chiral L molecules, the transformation-triggered asymmetric rearrangement of the staple motifs on the surface of the gold core, and the helical arrangement of nanocluster molecules. The construction of this type of enantiomerically pure nanoclusters is achieved based on the easy-to-synthesize and modular L. Lastly, the chirality-related chiroptical performance was investigated, revealing a negative nonlinear CD-ee dependence.

Air-tolerant upconverted circularly polarized luminescence enabled by confined space of chiral micelle

Circularly polarized luminescence (CPL) has been widely demonstrated that the circular polarization in excited state can be significantly amplified through the triplet-triplet annihilation-based upconversion (TTA-UC) luminescence process in various chiral nano-assemblies. However, constructing such an upconverted circularly polarized luminescence (UC-CPL) system in the aqueous phase remains a challenge. In this work, a kind of amphiphilic chiral cationic gemini surfactant is utilized to construct chiral spherical micelle in the aqueous phase, whose internal chiral cavity can provide a hydrophobic and deoxygenated environment for air-sensitive TTA-UC system. In addition, due to the co-assembly process between the emitters and chiral micelles, achiral emitters of upconversion pairs exhibit induced chiroptical properties. More importantly, the luminescence dissymmetry factor (g_lum ) can be amplified by one order of magnitude through TTA-UC process. This work provides an effective and useful strategy for realizing UC-CPL in aqueous phase.

Rational Design of All-Inorganic Assemblies with Bright Circularly Polarized Luminescence

Materials with exceptional circularly polarized luminescence (CPL) are important in multi-field applications such as 3D display, anti-counterfeiting, sensing, spin electronics, etc. Although CPL properties have been widely investigated ranging from the traditional chiral organic molecules to the emerging chiral inorganic nanomaterials and their assemblies, a trade-off between the luminescence efficiency (quantum yield, ϕ) and the luminescence dissymmetry factor (g_lum ) is always the bottleneck for all the chiral luminescent materials, which hinders their practical application. Herein, a new route to overcome the paradox through rationally assembling quantum nanorods and ultrathin inorganic nanowires into ordered multilayer structures is reported, achieving both high ϕ and g_lum . In these assembled structures, the aligned quantum nanorods emit linearly polarized light that is then transformed to CPL by the aligned ultrathin nanowire assemblies with precisely controlled phase retardation. This method is universal and readily extended to versatile 1D nanomaterials, paving the way for the practical applications of CPL active materials.

Open Nitrogen Site-Induced Kinetic Resolution and Catalysis of a Gold Nanocluster

The emerging metal nanocluster provides a platform for the investigation of structural features, unique properties, and structure-property correlation of nanomaterials at the atomic level. Construction of open sites on the surface of the metal nanocluster is a long-pursued but challenging goal. Herein, we realized the construction of "open organic sites" in a metal nanocluster for the first time. Specifically, we introduce the PNP (2,6-bis(diphenylphosphinomethyl)pyridine) pincer ligand in the synthesis of the gold nanocluster, enabling the construction of a structurally precise Au₈(PNP)₄ nanocluster. The rigidity and the unique bonding mode of PNP lead to open nitrogen sites on the surface of the Au₈(PNP)₄ nanocluster, which have been utilized as multifunctional sites in this work for efficient kinetic resolution and catalysis. The gold pincer nanocluster and the open nitrogen site-induced performance will be enlightening for the construction of multifunctional metal nanoclusters.

Chiral Inversion and Recovery of Supramolecular Luminescent Copper Nanocluster Hydrogels Triggered by Polyethyleneimine and Polyoxometalates

Construction of controllable chiroptical supramolecular luminescence systems is of great significance for developing intelligent chiral luminescence materials with precise and effective regulation and understanding chirality-switching phenomena in biological systems, which has attracted extensive attention. Because chiral metal nanoclusters (NCs) can provide facilities for the study of nanoscale chiral effects, in this study, we select chiral glutathione-stabilized copper NCs (G-SH-Cu NCs) to construct a supramolecular luminescent hydrogel with achiral branched polyethyleneimine (PEI) and polyoxometalates [Na₉(EuW₁₀O₃₆)·32H₂O, denoted as EuW₁₀]. Thus, a chiral property precise controlled system was constructed by self-assembly. Interestingly, the addition of PEI to G-SH-Cu NC solution induced the formation of luminescent hydrogels with chiral inversion, while further addition of EuW₁₀ not only enhanced the luminescence of the hydrogel but also recovered the chiroptical properties. The chiral inversion behavior is possibly ascribed to the hydrogen bond interaction/electrostatic interaction between G-SH-Cu NCs and PEI in the chiral inversion process, while the competition of hydrogen bonding interaction (between G-SH-Cu NCs and PEI) and electrostatic interaction (between PEI and EuW₁₀) was accountable for the chiral recovery process. Manipulation of chirality inversion in the metal NC-containing coassemblies is rare, while this work establishes a feasible strategy to modulate the chiral inversion behavior of Cu NCs, which not only produces new physicochemical properties of metal NCs through synergistic behavior but also offers a feasible way to realize the potential application of chiroptical materials.

Robust Enantiomeric Two-Dimensional Assembly of Atomically Precise Silver Clusters

The facile syntheses of enantiomeric atomically precise silver clusters starting from achiral ligands remain a substantial challenge to explore. In this work, a pair of atomically precise enantiomers of R/S-[Ag₁₇Cl(ⁱPrS)₉S(CH₃COO)₅H₂O] (R/S-Ag₁₇, ⁱPrS = isopropanethiolate) clusters have been synthesized using a viable solvothermal approach. The chirality of the resulting enantiomeric R/S-Ag₁₇ clusters is attributed to the asymmetric arrangement of surface achiral ligands. Both R/S-Ag₁₇ enantiomers could form the two-dimensional (2D) assemblies via intercluster interactions of basic building blocks containing Ag₁₆S₈ moieties, ⁱPrS-Ag motifs, and S^2- linkers. Such a small ligand-induced 2D assembly greatly contributes to the enhancement of thermal stability and photocatalytic activity of R/S-Ag₁₇ clusters, providing possibilities for exploring robust coinage cluster-based assembly with attractive catalytic properties.

Metal Cluster Triggered-Assembling Heterogeneous Au-Ag Nanoclusters with Highly Loading Performance and Biocompatible Capability

In this work, we firstly report the preparation of heterogeneously assembled structures Au-Ag nanoclusters (NCs) as good drug carriers with high loading performance and biocompatible capability. As glutathione-protected Au and Ag clusters self-assembled into porous Au-Ag NCs, the size value is about 1.358 (±0.05) nm. The morphology characterization revealed that the diameter of Au-Ag NCs is approximately 120 nm, as well as the corresponding potential ability in loading performance of the metal cluster triggered-assembling process. Compared with individual components, the stability and loading performance of heterogeneous Au-Ag NCs were improved and exhibit that the relative biocompatibility was enhanced. The exact information about this is that cell viability was approximately to 98% when cells were incubated with 100 µg mL−1 particle solution for 3 days. The drug release of Adriamycin from Au-Ag NCs was carried out in PBS at pH = 7.4 and 5.8, respectively. By simulating in vivo and tumor microenvironment, the release efficiency could reach over 65% at pH = 5.8 but less than 30% at pH = 7.2. Using an ultrasound field as external environment can accelerate the assembling process while metal clusters triggered assembling Au-Ag NCs. The size and morphology of the assembled Au-Ag NCs can be controlled by using different power parameters (8 W, 13 W, 18 W) under ambient atmosphere. Overall, a novel approach is exhibited, which conveys assembling work for metal clusters triggers into heterogeneous structures with porous characteristic. Its existing properties such as water-solubility, stability, low toxicity and capsulation can be considered as dependable agents in various biomedical applications and drug carriers in immunotherapies.

Modulation of Nano-superstructures and Their Optical Properties

Self-assembly, which enables spontaneous arrangement of objects, is of particular importance for nanomaterials in both fundamental and applied research fields. Multiple types of nanoparticle superstructures have been successfully built in highly controllable and efficient manners through balancing the nanoscale interactions. Uniform and proper arrangement of nanoparticles inside the assembled superstructures is essential to exhibit their constant, reliable, and homogeneous functionalities. To be specific, the long-range ordered superlattices not only succeed with their building blocks' intrinsic property, but also, more importantly, can display collective properties that are absent both in individual nanoparticles and in their bulk states. One of the most attractive aspects of nanomaterials is their exceptional optical properties that have tremendous application potential in multidisciplinary fields. In this regard, constructing the superstructures from optical nano units like noble metal nanostructures, semiconductor nanoparticles, or hybrid nanomaterials is critical for attaining the unique optical properties and exploring their practical applications in multiple fields including photonics, optoelectronics, optical sensing, photocatalysis, etc. In this Account, we provide guidelines for self-assembly strategies to fabricate the superstructures and discuss the optical properties that the superstructures display. In the first part, we categorize and discuss the key factors that strongly affect the self-assembly process and determine the configurational and integral quality of the superstructures. On one hand, the diversity and designability of nanoparticles offer the intrinsic complexity of the building blocks, including geometry, size, composition, and surface ligand, which efficiently tailors the assembly process and superstructure configuration. On the other hand, multiple factors originating from the introduction of extrinsic features are recognized to facilitate the metastable or dynamic self-assembly process. Such extrinsic features include both matter like DNA origami, peptides, small molecules, etc. and nonmatter involved with electric fields, magnetic fields, light, temperature, etc. In the second part, we introduce the state-of the art progress on the collective optical performances of the assembled superstructures, including (1) chiral optics, such as circular dichroism and circularly polarized luminescence, (2) plasmonic properties and related applications, and (3) luminescence related optics and their applications. Finally, we summarize the existing problems and main challenges briefly, and some future directions of this field are proposed. We envision that, with deep understanding of the assembly mechanism and development of the synthetic and surface chemistry, rational modulation of nanoassemblies will be the trend of this field, which is beneficial to achieve the emerging collective performances and create new generation devices with advanced functions.

Tunable Circularly Polarized Luminescence from Inorganic Chiral Photonic Crystals Doped with Quantum Dots

Chiral semiconductor nanostructures have received enormous attention due to their emerging circularly polarized luminescence (CPL) properties. However, compared with well-studied photoluminescence (PL), the reported CPL is much weaker and more challenging to be modulated. Herein, we describe a new approach for acquiring the intense and tunable CPL from inorganic chiral photonic crystals (CPCs) doped with semiconductor quantum dots (QDs). Unprecedentedly, the sign, position and intensity of CPL peaks can be precisely controlled by manipulating either the photonic band gap of CPCs or luminescence wavelength of QDs and a giant absolute dissymmetry factor |g_lum | up to 0.25 is obtained. More importantly, the origin of the CPL modulation is clearly elucidated by both experiment and theory. This work lays the foundation for the construction of next-generation high-performance CPL-based devices.

Liquid crystal-templated chiral nanomaterials: from chiral plasmonics to circularly polarized luminescence

Chiral nanomaterials with intrinsic chirality or spatial asymmetry at the nanoscale are currently in the limelight of both fundamental research and diverse important technological applications due to their unprecedented physicochemical characteristics such as intense light-matter interactions, enhanced circular dichroism, and strong circularly polarized luminescence. Herein, we provide a comprehensive overview of the state-of-the-art advances in liquid crystal-templated chiral nanomaterials. The chiroptical properties of chiral nanomaterials are touched, and their fundamental design principles and bottom-up synthesis strategies are discussed. Different chiral functional nanomaterials based on liquid-crystalline soft templates, including chiral plasmonic nanomaterials and chiral luminescent nanomaterials, are systematically introduced, and their underlying mechanisms, properties, and potential applications are emphasized. This review concludes with a perspective on the emerging applications, challenges, and future opportunities of such fascinating chiral nanomaterials. This review can not only deepen our understanding of the fundamentals of soft-matter chirality, but also shine light on the development of advanced chiral functional nanomaterials toward their versatile applications in optics, biology, catalysis, electronics, and beyond.

Solvent-Induced Isomeric Cu13 Nanoclusters: Chlorine to Copper Charge Transfer Boosting Molecular Oxygen Activation in Sulfide Selective Oxidation

Isomers with minimal structural dissimilarities are promising research objects to obtain a comprehensive understanding of structure-property relationships; however, comparability of isomeric structures is a prerequisite. Herein, two quasi-structurally isomeric 13-nuclei copper nanoclusters (Cu NCs) (Cu13a and Cu13b) containing highly similar Cu₁₃ kernels and different arrangements of peripheral ligands were obtained using a solvent-induced strategy. The exotic chloride ion is shown to play a prominent role in inducing the selective formation of two quasi-isomers, where the comparative study to establish a structure-property relationship was realized. Due to the charge transition from chlorine to the copper core (X_(Cl)M_(Cu)CT), the molecular oxygen activation of Cu13a showed higher singlet oxygen (¹O₂) and lower superoxide radical (O₂^•-) yields compared to those of Cu13b, which gives it better catalytic selectivity for the ¹O₂ involved selective oxidation of sulfides. The present work not only offers a controllable strategy for the rational design and synthesis of quasi-structurally isomeric Cu NCs but also provides a pathway to boost catalytic selectivity by a halogen to metal core charge transition.

Understanding a ligand's effects on intra-cluster and inter-cluster assembly

Ligands play an essential role in cluster assembly; however, understanding this behavior at the atomic level is far off. In this work, Cd₁₂Ag₃₂(S-PhOMe)₃₆(PPh)₄@Cd₆Ag₂(S-PhOMe)₆Cl₆(PPh₃)₈@Ag₆(S-PhOMe)₆Cl₂ (Abbrev. Cd12Ag32-1) and Cd₁₂Ag₃₂(S-c-C₆H₁₁)₃₆ (Abbrev. Cd12Ag32-2) were synthesized and structurally determined by single-crystal X-ray diffraction. An important finding is the selective adsorption of phosphine ligands that is caused by the different types of thiol ligands. In addition, Cd12Ag32-1 follows a unique stacking pattern in a superlattice with multiple inter-cluster channels. Overall, this study is helpful for an in-depth understanding of the effect of mixed ligands on nanocluster formation and the correlation between structure and properties in the nanocluster range.

Nanoparticle and bioparticle deposition kinetics

Mechanisms and kinetic of particle deposition at solid surfaces leading to the formation of self-assembled layers of controlled structure and density were reviewed. In the first part theoretical aspects were briefly discussed, comprising limiting analytical solutions for the linear transport under flow and diffusion. Methods of the deposition kinetics analysis for non-linear regimes affected by surface blocking were also considered. Characteristic monolayer formation times under diffusion and flow for the nanoparticle size range were calculated. In the second part illustrative experimental results obtained for micro- and nanoparticles were discussed. Deposition at planar substrates was analyzed with emphasis focused on the stability of layers and the release kinetics of silver particles. Applicability of the quartz microbalance measurements (QCM) for quantitative studies of nanoparticle deposition kinetic was also discussed. Except for noble metal and polymer particles, representative results for virus deposition at abiotic surfaces were analyzed. Final part of the review was devoted to nanoparticle corona formation at polymer carrier particles investigated by combination of the concentration depletion, AFM, SEM and the in situ electrokinetic method. It is argued that the results obtained for colloid particles can be used as reliable reference systems for interpretation of protein and other bioparticle deposition, confirming the thesis that simple is universal.

Optical Activity from Anisotropic-Nanocluster-Assembled Supercrystals in Achiral Crystallographic Point Groups

Accomplishing optical activity in achiral materials has long been a challenge. Achiral nanomaterials that crystallize in achiral point groups are generally optically inactive. Herein we report the surprising observation of optical activity in several achiral point groups for supercrystals assembled from anisotropic metal nanoclusters with atomic precision. By analyzing multiple achiral nanoclusters with different molecular structures and symmetry space groups, we have identified that the molecular anisotropy of nanocluster entities and their asymmetric arrangement in point groups of supercrystals are the two key factors for the realization of optical activity in such supercrystals. We have further exploited the polarization effect of the nanocluster supercrystals as a polarization switch that can alter the polarized state of the linearly polarized light. Our findings have broadened the fundamental principles for producing nanomaterial-based optical activity and devices with polarization effects.

Evolution from superatomic Au24Ag20 monomers into molecular-like Au43Ag38 dimeric nanoclusters

Hierarchical assembly of nanoparticles has been attracting wide interest, as advanced functionalities can be achieved. However, the ability to manipulate structural evolution of artificial nanoparticles into assemblies with atomic precision has been largely unsuccessful. Here we report the evolution from monomeric Au₂₄Au₂₀ into dimeric Au₄₃Ag₃₈ nanoclusters: Au₄₃Ag₃₈ inherits the kernel frameworks from parent Au₂₄Ag₂₀ but exhibits distinct surface motifs; Au₂₄Ag₂₀ is racemic, while Au₄₃Ag₃₈ is mesomeric. Importantly, the evolution from monomers to dimers opens up exciting opportunities exploring currently unknown properties of monomeric and dimeric alloy nanoclusters. The Au₂₄Ag₂₀ clusters show superatomic electronic configurations, while Au₄₃Ag₃₈ clusters have molecular-like characteristics. Furthermore, monomeric Au₂₄Ag₂₀ catalysts readily outperform dimeric Au₄₃Ag₃₈ catalysts in the catalytic reduction of CO₂.

The work shows the evolution from monomeric Au₂₄Au₂₀ into dimeric Au₄₃Ag₃₈ nanoclusters and provides exciting opportunities for atomic manufacturing on metal nanoclusters to construct structures and functionality.

Self-Assembled Metal Nanoclusters: Driving Forces and Structural Correlation with Optical Properties

Studies on self-assembly of metal nanoclusters (MNCs) are an emerging field of research owing to their significant optical properties and potential applications in many areas. Fabricating the desired self-assembly structure for specific implementation has always been challenging in nanotechnology. The building blocks organize themselves into a hierarchical structure with a high order of directional control in the self-assembly process. An overview of the recent achievements in the self-assembly chemistry of MNCs is summarized in this review article. Here, we investigate the underlying mechanism for the self-assembly structures, and analysis reveals that van der Waals forces, electrostatic interaction, metallophilic interaction, and amphiphilicity are the crucial parameters. In addition, we discuss the principles of template-mediated interaction and the effect of external stimuli on assembly formation in detail. We also focus on the structural correlation of the assemblies with their photophysical properties. A deep perception of the self-assembly mechanism and the degree of interactions on the excited state dynamics is provided for the future synthesis of customizable MNCs with promising applications.

Master key to coinage metal nanoclusters treasure chest: 38-metal clusters

Atomically precise metal nanoclusters with specific chemical compositions have become a popular research topic due to their precise structures, attractive properties, and wide range of applications in various fields. Currently, among more than 100 reported metal nanoclusters with precise formulas, 38-atom coinage metal nanoclusters stand out due to their unique structural diversities, such as face-centered cubic (FCC) and body-centered cubic (BCC) arrangements. Among them, the formation of the metal cores includes vertex-sharing, face-fusion, and FCC cubes fusion. Due to their geometrical features, 38-atom coinage metal nanoclusters exhibit attractive properties, making them an ideal model for exploring structure-property relationships. Therefore, 38-atom coinage metal nanoclusters are a universal key to the treasure trove of nanoclusters, which can open almost all fields and are of great research significance. This paper focuses on the structure of 38-atom coinage metal nanoclusters and reviews the preparation and crystallization methods, excellent properties, and practical applications. Finally, future research prospects and development opportunities are provided.

Controllable spontaneous resolution in ultrasmall Cu-Ag bimetallic cluster ion pairs from achiral components

Bimetallic cluster ion pairs containing a quaternary phosphonium and an ultrasmall Cu₂Ag₃ anionic cluster protected by thiolates: (PPh₃R'')[Cu₂Ag₃(SR')₆] (R'SH = cyclohexylthiol (CySH), R'' = Ph, 1; Me, 2; Et, 3; Pr, 4; R'SH = tert-butylthiol (^tBuSH) and R'' = Ph, 5) were reported. Without any chiral source, 1 crystallizes as conglomerate crystals with homochiral packings and spontaneous resolution occurs, while four other clusters 2-5 crystallize as racemic crystals with heterochiral packings. These results indicate that racemic and homochiral crystallization in the cluster system could be controlled through fine-tuning internal achiral structural components.

Amplifying inorganic chirality using liquid crystals

Chiral inorganic nanostructures have drawn extensive attention thanks to their unique physical properties as well as multidisciplinary applications. Amplifying inorganic chirality using liquid crystals (LCs) is an efficient way to enhance the parented inorganic asymmetry owing to chirality transfer. Herein, the universal synthetic methods and structural characterizations of chiral inorganic-doped LC hybrids are introduced. Additionally, the current progress and status of recent experiment and theory research about chiral interactions between inorganic nanomaterials (e.g. metal, semiconductor, perovskite, and magnetic oxide) and LCs are summarized in this review. We further present representative applications of these new hybrids in the area of encryption, sensing, optics, etc. Finally, we provide perspectives on this field in terms of material variety, new synthesis, and future practice. It is envisaged that LCs will act as a pivotal part in the amplification of inorganic chirality with versatile applications.

Self-assembled inorganic chiral superstructures

Controlled assembly of inorganic nanoparticles with different compositions, sizes and shapes into higher-order structures of collective functionalities is a central pursued objective in chemistry, physics, materials science and nanotechnology. The emerging chiral superstructures, which break spatial symmetries at the nanoscale, have attracted particular attention, owing to their unique chiroptical properties and potential applications in optics, catalysis, biology and so on. Various bottom-up strategies have been developed to build inorganic chiral superstructures based on the intrinsic configurational preference of the building blocks, external fields or chiral templates. Self-assembled inorganic chiral superstructures have demonstrated significant superior optical activity from the strong electric/magnetic coupling between the building blocks, as compared with the organic counterparts. In this Review, we discuss recent progress in preparing self-assembled inorganic chiral superstructures, with an emphasis on the driving forces that enable symmetry breaking during the assembly process. The chiroptical properties and applications are highlighted and a forward-looking trajectory of where research efforts should be focused is discussed.

Achiral copper clusters helically confined in self-assembled chiral nanotubes emitting circularly polarized phosphorescence

Achiral Cu5− cluster coassembled with a chiral amphiphile to afford helical nanotubes, where the Cu5− cluster was confined within the nanotubes, forming helical arrangement with emerged chiroptical activities (CD and CPP), with a large gabs up to 0.018.