Asymmetric Catalytic Preparation of Polysubstituted Cyclopropanol and Cyclopropylamine Derivatives

Stereoselective Cyclopropanation of Multisubstituted Enesulfinamides: Asymmetric Construction of α-Tertiary Cyclopropylamine Derivatives Containing β-Quaternary Stereocenters

Enesulfinamides with α,β,β-trisubstitution undergo a Simmons-Smith reaction to yield multisubstituted cyclopropylamine derivatives with high stereocontrol. The resulting α-tertiary cyclopropylamine derivatives, which feature β-quaternary stereocenters bearing two electronically and sterically similar substituents (e.g., methyl and ethyl), are seldom achieved by using conventional methods. By adjusting the stereochemistry of the carbon-carbon double bond and/or sulfinyl group within the enesulfinamides, it is feasible to selectively produce four stereoisomers of the cyclopropylamines, each with different absolute configurations at the α- and β-carbons.

Copper(I)-Catalyzed Asymmetric Hydrophosphination of 3,3-Disubstituted Cyclopropenes

Herein, a copper(I)-catalyzed asymmetric hydrophosphination of 3,3-disubstituted cyclopropenes is reported. It provides a series of phosphine derivatives in high to excellent diastereo- and enantioselectivities. The methodology enjoys broad substrate scope on both 3,3-disubstituted cyclopropenes and diarylphosphines. The high stereoselectivity is attributed to both the high stability of the Cu(I)-(R,R)-QUINOXP* complex in the presence of stoichiometric HPPh2 and the produced phosphines, and the high-performance asymmetric induction of the Cu(I)-(R,R)-QUINOXP* complex. Finally, the method is used for the synthesis of new chiral phosphine-olefin compounds built on a cyclopropane skeleton, one of which serves as a wonderful ligand in Rh-catalyzed asymmetric conjugate addition of phenylboronic acid to various α,β-unsaturated compounds.

Diastereo- and Enantioselective Hydrophosphination of Cyclopropenes under Lanthanocene Catalysis

The asymmetric hydrophosphination of cyclopropenes with phosphines is of much interest and importance, but has remained hardly explored to date probably because of the lack of suitable catalysts. We report here the diastereo- and enantioselective hydrophosphination of 3,3-disubstituted cyclopropenes with phosphines by a chiral lanthanocene catalyst bearing the C2 -symmetric 5,6-dioxy-4,7-trans-dialkyl-substituted tetrahydroindenyl ligands. This protocol offers a selective and efficient route for the synthesis of a new family of chiral phosphinocyclopropane derivatives, featuring 100 % atom efficiency, good diastereo- and enantioselectivity, broad substrate scope, and no need for a directing group.

Site- and Stereoselective C(sp3 )-H Borylation of Strained (Hetero)Cycloalkanols Enabled by Iridium Catalysis

Transition metal-catalyzed site- and stereoselective C-H activation of strained (hetero)cycloalkanes remains a formidable challenge. We herein report a carbamate-directed iridium-catalyzed asymmetric β-C(sp³ )-H borylation of cyclopropanol derivatives. A variety of densely functionalized cyclopropanols were obtained in good enantioselectivities via desymmetrization and kinetic resolution. In addition, site-selective C(sp³ )-H borylation of methine groups furnished α-borylated (hetero)cycloalkanols in moderate to good yields. The synthetic utility of the method was further shown in a gram-scale synthesis and diverse downstream transformations of borylated products.

Regio- and Diastereoselective Carbometalation Reaction of Cyclopropenes

The various facets of the chemistry of cyclopropane derivatives, the smallest carbocycle, are amazingly diverse and continue to fascinate theoreticians, synthetic or structural chemists having interest in fundamental physical, medicinal chemistry, and natural product synthesis. The challenges generated by this intriguing cyclic arrangement of only three tetravalent carbons represent a wide area of the chemical spectrum. From fundamental aspects of bonding through the synthesis of highly strained molecules, the understanding of the mode of action in biological systems to the selective cleavage into acyclic substrates makes the chemistry of these small rings fascinating. Therefore, efficient routes to prepare differently polysubstituted cyclopropanes have always been of a primordial importance. In the past decade, we and others have expanded the scope of the carbometalation reaction of cyclopropenes as a broad and general method to the formation of stereodefined cyclopropane derivatives. Although cyclopropenes, with their even higher strain energy, easily undergo addition reactions of organometallic reagents, their carbometalation reactions generate new regio-, diastereo-, and enantioselectivity issues that needed to be addressed. These various stereochemical aspects accompanied our research from its origins to today, and we are proposing in this Account, a didactic overview of the different ways by which cyclopropenes can lead to the formation of polysubstituted cyclopropanes or open-products possessing several stereogenic centers as a single regio- and diastereomer.We initially launched our research campaign on the chemistry of these strained three-membered rings by the regio- and diastereoselective copper-catalyzed carbomagnesiation of enantiomerically enriched cyclopropenyl carbinols. The directing alcohol governed both the regio- and diastereoselectivity of the addition and also served as a good leaving group as it undergoes a selective 1,2-elimination reaction to provide enantioenriched alkylidenecyclopropanes in excellent yields and enantiomeric excesses. Then, we turned our attention to the regio- and stereoselective synthesis of stereodefined tri- and tetrasubstituted cyclopropanes through the diastereoselective addition to sp²- monosubstituted cyclopropenyl ester derivatives. With the aim to further expand this concept to the formation of penta- and hexa-substituted cyclopropanes as single isomer, we had first to design the preparation of the required 1,2-disubstituted cyclopropenes that would control the regioselective addition of the organometallic derivatives. The synthesis of penta- and hexa-substituted cyclopropanes was then reported for the first time as a single regio- and diastereomer. It should be noted that the in situ formed cyclopropyl-metal intermediate is configurationally stable and can be subsequently functionalized with pure retention of the configuration by addition of electrophiles. Then, the enantioselective-catalyzed carbometalation reaction of achiral cyclopropenes allowed the synthesis of several new classes of cyclopropane derivatives in high enantiomeric ratios. Finally, by combining the regio- and diastereoselective carbometalation reaction of a cyclopropene with a subsequent reaction of the resulting cyclopropylmetal species, a selective carbon-carbon bond cleavage was observed to lead to the preparation of acyclic substrates possessing several stereocenters including a quaternary carbon stereogenic center. Our original vision of using strain within an embedded double bond in a three-membered ring has provided new routes to the stereoselective synthesis of polysubstituted cyclopropanes and has been extremely successful, as it represents a current new tool for the synthesis of persubstituted cyclopropanes as a single diastereomer.

Preparation of Distant Quaternary Carbon Stereocenters by Double Selective Ring-Opening of 1,1-Biscyclopropyl Methanol Derivatives

The diastereoselective double carbometalation reaction of cyclopropenes provides, in a single‐pot operation, two ω‐ene‐[1,1]‐bicyclopropyl ester derivatives. One regioisomer then undergoes a Pd‐catalyzed addition of aryl iodide to provide skipped dienes possessing several distant stereocenters including two congested quaternary carbon centers with excellent diastereoselectivity.

Stereoinvertive Nucleophilic Substitution at Quaternary Carbon Stereocenters of Cyclopropyl Ketones and Ethers

A highly regio‐ and diastereoselective nucleophilic substitution at the quaternary carbon stereocenter of cyclopropyl ketones and cyclopropyl carbinol derivatives using TMSBr, DMPSCl and TMSN₃ as nucleophiles has been developed. A variety of acyclic tertiary alkyl bromides, chlorides and azides were therefore prepared with excellent diastereopurity. The substitution occurs at the most substituted quaternary carbon center in a stereoinvertive manner, which may be attributed to the existence of a bicyclobutonium species.

Iridium-Catalyzed Enantioselective C(sp3 )-H Borylation of Aminocyclopropanes

Transition-metal-catalyzed regio- and stereo-controllable C-H functionalization remains a formidable challenge in asymmetric catalysis. Herein, we disclose the first example of iridium-catalyzed C(sp³ )-H borylation of aminocyclopropanes by using simple imides as weakly coordinating directing groups under mild reaction conditions. The reaction proceeded via a six-membered iridacycle, affording a vast range of chiral aminocyclopropyl boronates. The current method features a broad spectrum of functional groups (36 examples) and high enantioselectivities (up to 99 %). We also demonstrated the synthetic utility by a preparative scale C-H borylation, C-B bond transformations, and conversion of the directing group.

Ti-Catalyzed Diastereoselective Cyclopropanation of Carboxylic Derivatives with Terminal Olefins

Cyclopropanols and cyclopropylamines not only serve as important structural motifs in medicinal chemistry but also show diverse reactivities in organic synthesis. Owing to the high ring strain energy, the development of a general protocol from stable and readily available starting materials to afford these cyclopropyl derivatives remains a compelling challenge. Herein, we describe that a Ti-based catalyst can effectively promote the diastereoselective syntheses of cyclopropanols and cyclopropylamines from widely accessible carboxylic derivatives (acids, esters, amides) with terminal olefins. To the best of our knowledge, this method represents the first example of direct converting alkyl carboxylic acids into cyclopropanols. Distinct from conventional studies in Ti-mediated cyclopropanations with reactive alkyl Grignard reagents as nucleophiles or reductants, this protocol utilizes Mg and Me₂SiCl₂ to turn over the Ti catalyst. Our method exhibits broad substrate scope with good functional group compatibility and is amenable to late-stage synthetic manipulations of natural products and biologically active molecules.

Stereoselective Cyclopropanation of Enamides via C―C Bond Cleavage of Cyclopropenes

This work describes a straightforward protocol for the stereoselective synthesis of vinylcyclopropylamides in high E/Z and syn/anti ratios by cyclopropanation of N-tosyl substituted enamides with cyclopropenes in the presence of...

Azide Radical Initiated Ring Opening of Cyclopropenes Leading to Alkenyl Nitriles and Polycyclic Aromatic Compounds

We report herein a radical-mediated amination of cyclopropenes. The transformation proceeds through a cleavage of the three-membered ring after the addition of an azide radical on the strained double bond and leads to tetrasubstituted alkenyl nitrile derivatives upon loss of N₂ . With 1,2-diaryl substituted cyclopropenes, this methodology could be extended to a one-pot synthesis of highly functionalized polycyclic aromatic compounds (PACs). This transformation allows the synthesis of nitrile-substituted alkenes and aromatic compounds from rapidly accessed cyclopropenes using only commercially available reagents.

Catalytic radical cascade cyclization of alkene-tethered enones to fused bicyclic cyclopropanols

Fused bicyclic cyclopropanols were achieved via an unprecedented HAT-triggered radical cascade reaction of alkene-tethered enones in the presence of an iron catalyst.

Generation of Mixed Anhydrides via Oxidative Fragmentation of Tertiary Cyclopropanols with Phenyliodine(III) Dicarboxylates

Oxidative fragmentation of tertiary cyclopropanols with phenyliodine(III) dicarboxylates in aprotic solvents (dichloromethane, chloroform, toluene) produces mixed anhydrides. The fragmentation reaction is especially facile with phenyliodine(III) reagents bearing electron-withdrawing carboxylate ligands (trifluoroacetyl, 2,4,6-trichlorobenzoyl, 3-nitrobenzoyl), and affords 95−98% yields of the corresponding mixed anhydride products. The latter can be straightforwardly applied for the acylation of various nitrogen, oxygen and sulfur-centered nucleophiles (primary and secondary amines, hydroxylamines, primary alcohols, phenols, thiols). Intramolecular acylation yielding macrocyclic lactones can also be performed. The developed transformation has bolstered the synthetic utility of cyclopropanols as pluripotent intermediates in diversity-oriented synthesis of bioactive natural products and their synthetic congeners. For example, it was successfully applied for the last-stage modification of a cyclic peptide to produce a precursor of a known histone deacetylase inhibitor.

Assembly of polysubstituted chiral cyclopropylamines via highly enantioselective Cu-catalyzed three-component cyclopropene alkenylamination

Enabled by a commercial bisphosphine ligand, the Cu-catalyzed three-component cyclopropene alkenylamination with alkenyl organoboron reagent and hyroxyamine esters proceeds with exceptionally high enantioselectivity to deliver poly-substituted cis-1,2-alkenylcyclopropylamines that contain up to all three stereogenic centers on the cyclopropane.

General Synthesis of Cyclopropanols via Organometallic Addition to 1-Sulfonylcyclopropanols as Cyclopropanone Precursors

The addition of organometallic reagents to ketones constitutes one of the most straightforward synthetic approaches to tertiary alcohols. However, due to the absence of a well-behaved class of cyclopropanone surrogates accessible in enantioenriched form, such a trivial synthetic disconnection has received very little attention in the literature for the formation of tertiary cyclopropanols. In this work, we report a simple and high-yielding synthesis of 1-substituted cyclopropanols via the addition of diverse organometallic reagents to 1-phenylsulfonylcyclopropanols, acting here as in situ precursors of the corresponding cyclopropanones. The transformation is shown to be amenable to sp-, sp²-, or sp³-hybridized organometallic C-nucleophiles under mild conditions, and the use of enantioenriched substrates led to highly diastereoselective additions and the formation of optically active cyclopropanols.

Cobalt-Catalyzed Diastereoselective and Enantioselective Hydrosilylation of Achiral Cyclopropenes

A mild diastereoselective and enantioselective cobalt-catalyzed hydrosilylation reaction of achiral cyclopropenes has been developed. In this protocol, various substituted cyclopropenes and arylsilanes were transformed, in the presence of readily available chiral cobalt complex, into silylcyclopropanes with high selectivities.

Developments in the construction of cyclopropanols

The ring-opening of cyclopropanols is one of the most active areas of research and it has been well documented in recent years owing to subsequent coupling with various partners, thus providing the facile syntheses of a large number of multifunctional compounds that may otherwise be difficult to access. Evidently, the useful cascade reaction requires easy access to diversely functionalized cyclopropanol substrates. However, developments in the construction of cyclopropanols have not received adequate attention. Herein, recent reports on the formation of cyclopropanols are summarized, and the highly stereoselective production of new promising substrates for the cyclopropanol ring-opening/cross-coupling reactions are introduced and improved syntheses of known cyclopropanols are depicted. This review may facilitate more interesting applications of the cyclopropanol ring-opening/coupling reaction in the synthesis of pharmaceutical compounds, natural products, and structurally more diversified organic synthetic intermediates.

Pd-Catalyzed Enantioselective Hydroalkynylation of Cyclopropenes

We report herein an easy, mild, and robust Pd-catalyzed enantioselective hydroalkynylation reaction of achiral cyclopropenes. Commercially available Pd(acac)₂ and (R)-DM-BINAP proved to be the best combination to reach high diastereo- and enantioselectivities.

Diastereo- and Enantioselective CuH-Catalyzed Hydroamination of Strained Trisubstituted Alkenes

Amine-substituted cyclobutanes and cyclopropanes are important substructures in biologically active compounds. Moreover, many of the cycloalkane units bear multiple substituents and stereocenters. Therefore, synthetic methods that produce polysubstituted aminocyclobutanes and aminocyclopropanes in a highly diastereo- and enantioselective manner are of importance. Herein, we describe the diastereo- and enantioselective synthesis of various types of polysubstituted aminocyclobutanes and aminocyclopropanes through CuH-catalyzed hydroamination of 1-substituted cyclobutenes and cyclopropenes. These strained trisubstituted alkenes exhibit much higher reactivity compared to their unstrained analogues in the initial hydrocupration step of the reaction. Moreover, an interesting reversal of regioselectivity was observed in the hydroamination of 1-aryl-substituted cyclobutenes compared to the cyclopropene analogues. The origins of the enhanced reactivity of strained trisubstituted alkenes as well as the differences in the regio- and enantioselectivity between reactions with cyclobutenes and cyclopropenes were investigated computationally.

Copper-catalyzed non-directed hydrosilylation of cyclopropenes: highly diastereoselective synthesis of fully substituted cyclopropylsilanes

The non-directed hydrosilylation of cyclopropenes with earth-abundant and environmentally benign base metal catalysis was described.

Controllable Si-C Bond Activation Enables Stereocontrol in the Palladium-Catalyzed [4+2] Annulation of Cyclopropenes with Benzosilacyclobutanes

A novel and unusual palladium-catalyzed [4+2] annulation of cyclopropenes with benzosilacyclobutanes is reported. This reaction occurred through chemoselective Si-C(sp² ) bond activation in synergy with ring expansion/insertion of cyclopropenes to form new C(sp² )-C(sp³ ) and Si-C(sp³ ) bonds. An array of previously elusive bicyclic skeleton with high strain, silabicyclo[4.1.0]heptanes, were formed in good yields with excellent diastereoselectivity under mild conditions. An asymmetric version of the reaction with a chiral phosphoramidite ligand furnished a variety of chiral bicyclic silaheterocycle derivatives with good enantioselectivity (up to 95.5:4.5 er). Owing to the mild reaction conditions, the good stereoselectivity profile, and the ready availability of the functionalized precursors, this process constitutes a useful and straightforward strategy for the synthesis of densely functionalized silacycles.

Copper-Catalyzed Enantio- and Diastereoselective Addition of Silicon Nucleophiles to 3,3-Disubstituted Cyclopropenes

A highly stereocontrolled syn‐addition of silicon nucleophiles across cyclopropenes with two different geminal substituents at C3 is reported. Diastereomeric ratios are excellent throughout (d.r.≥98:2) and enantiomeric excesses usually higher than 90 %, even reaching 99 %. This copper‐catalyzed C−Si bond formation closes the gap of the direct synthesis of α‐chiral cyclopropylsilanes.

Radical-Polar Crossover Annulation: A Platform for Accessing Polycyclic Cyclopropanes

Photoredox-mediated radical/polar crossover (RPC) processes provide unique solutions to challenging annulations. Herein, we describe an approach to the cyclopropanation of olefins that are embedded within bicyclic scaffolds. Whereas these systems are notoriously recalcitrant toward classical cyclopropanation approaches, RPC cyclopropanation can be executed with ease, leading to polycarbocyclic and polyheterocyclic cyclopropanes. The cyclopropanation proceeds through a photoredox-enabled Giese-type radical addition followed by an intramolecular anionic substitution reaction on a neopentyl leaving group.

Diastereoselective ring opening of fully-substituted cyclopropanes via intramolecular Friedel-Crafts alkylation

We herein disclose a diastereoselective ring opening of non-donor-acceptor cyclopropanes via an intramolecular Friedel-Crafts alkylation en route to functionalized dihydronaphthalene scaffolds possessing quaternary carbon stereocentres. The transformation proceeds through a selective bond breaking at the most alkylated carbon centre with a pure retention of configuration. Mechanistic investigations and computational studies revealed that alkoxy functionality is the key for selective bond breaking leading to a complete retention of configuration.

Synthesis of trans-2-Substituted Cyclopropylamines from α-Chloroaldehydes

Cyclopropylamines are prevalent in pharmaceuticals and agrochemicals. Herein, we report the synthesis of trans-2-substituted cyclopropylamines in high diastereoselectivity from readily available α-chloroaldehydes. The reaction proceeds via trapping of an electrophilic zinc homoenolate with an amine followed by ring closure to generate the cyclopropylamine. We have also observed that cyclopropylamine cis/trans-isomerization occurs in the presence of zinc halide salts and that this process can be turned off by the addition of a polar aprotic cosolvent.

Divergent Access to Histone Deacetylase Inhibitory Cyclopeptides via a Late-Stage Cyclopropane Ring Cleavage Strategy. Short Synthesis of Chlamydocin

A unified step-economical strategy for accessing histone deacetylase inhibitory peptides is proposed, based on the late-stage installation of multiple zinc-binding functionalities via the cleavage of the strained cyclopropane ring in the common pluripotent cyclopropanol precursor. The efficacy of the proposed diversity-oriented approach has been validated by short stereoselective synthesis of natural product chlamydocin, containing a challenging-to-install fragment of (2S,9S)-2-amino-8-oxo-9,10-epoxydecanoic acid (Aoe) and a range of its analogues, derivatives of 2-amino-8-oxodecanoic and 2-aminosuberic acids.

Catalytic Enantio- and Diastereoselective Cyclopropanation of 2-Azadienes for the Synthesis of Aminocyclopropanes Bearing Quaternary Carbon Stereogenic Centers

We report the catalytic enantio- and diastereoselective preparation of aminocyclopropanes by the cyclopropanation of terminal and (Z)-internal 2-azadienes with donor/acceptor carbenes derived from α-diazoesters. The resulting cyclopropanes bear quaternary carbon stereogenic centers vicinal to the amino-substituted carbon and are formed as a single diastereomer in up to 99:1 er and 97% yield with 0.5 mol % of Rh2(DOSP)4 and only 1.5 equiv of the diazo reagent. Transformations with internal azadienes afford cyclopropanes with three contiguous stereogenic centers.