Separation of Linear and Branched Alkanes Using Host–Guest Complexation of Cyclic and Branched Alkane Vapors by Crystal State Pillar[6]arene

Vapochromic separation of toluene and pyridine azeotropes using adaptive macrocycle co-crystals

The separation of toluene (Tol) and pyridine (Py) azeotropes is significant in the chemical industry. Herein, we present a new method for the energy-efficient separation of Tol and Py using pillar[5]arene-based adaptive macrocycle co-crystals (MCCs) that can selectively separate Py from a Py/Tol equimolar mixture with 99.2% purity, accompanied by vapochromic behavior from white to yellow.

Pillararenes: a new frontier in antimicrobial therapy

Pillararenes have gained great interest among researchers in many fields due to their symmetric structure and facile functionalization. In this review, we summarize recent progress for pillararenes as antimicrobial agents, ranging from cationic pillararenes and peptide-modified pillararenes to sugar-functionalized pillararenes. Moreover, their structure-activity relationships are presented, and their mechanisms of action are discussed. As a state-of-the-art technology, their opportunities and outlook are also outlined in this emerging field. Overall, their potent inhibitory activity and high biocompatibility give them potential for the development of novel antimicrobial agents.

Solvent-Responsive Nonporous Adaptive Crystals Derived from Pyridinium Hydrochloride and the Application in Iodine Adsorption

Nonporous adaptive crystals (NACs) are crystalline nonporous materials that can undergo a structural adaptive phase transformation to accommodate specific guest via porous cavity or lattice voids. Most of the NACs are based on pillararenes because of their flexible backbone and intrinsic porous structure. Here a readily prepared organic hydrochloride of 4-(4-(diphenylamino)phenyl)pyridin-1-ium chloride (TPAPyH), exhibiting the solvent dimension-dependent adaptive crystallinity is reported. Wherein it forms a nonporous α crystal in a solvent with larger dimensions, while forming two porous β and γ crystals capable of accommodating solvent molecules in solvent with small size. Furthermore, the thermal-induced single-crystal-to-single-crystal (SCSC) transition from the β to α phase can be initiated. Upon exposure to iodine vapor or immersion in aqueous solution, the nonporous α phase transforms to porous β phase by adsorbing iodine molecules. Owing to the formation of trihalide anion I2Cl- within the crystal cavity, TPAPyH exhibits remarkable performance in iodine storage, with a high uptaking capacity of 1.27 g g-1 and elevated iodine desorption temperature of up to 110 and 82 °C following the first and second adsorption stage. The unexpected adaptivity of TPAPyH inspires the design of NACs for selective adsorption and separation of volatile compound from organic small molecules.

Solid-State Emissive Pillar[6]arene Derivative Having Alternate Methylene and Nitrogen Bridges

Macrocyclic arenes show conformational adaptability, which allows host-guest complexations with the size-matched guest molecules. However, their emission properties are often poor in the solid states due to the self-absorption. Herein, we newly synthesized pillar[6]arene derivatives having alternate methylene and nitrogen bridging structures. Solvatochromic study reveals that the nitrogen-embedding into the cyclic structures can strengthen the intramolecular charge transfer (CT) nature compared to that of the linear nitrogen-bridged precursor. Owing to the large Stokes shift in the solid state, one of the nitrogen-embedded pillar[6]arenes shows high absolute photoluminescence quantum yield (ΦPL=0.36). Furthermore, it displays a turn-off sensing ability toward nitrobenzene (NB) vapor; a fluorescence quenching is observed when exposed to the NB vapor. From the structural analysis before and after the exposure of NB vapor, the amorphous nitrogen-embedded pillar[6]arene efficiently co-crystallize with NB and formed non-emissive intermolecular CT complexes with NB.

Silapillar[n]arenes: Their Enhanced Electronic Conjugation and Conformational Versatility

During recent decades, methylene-bridged macrocyclic arenes have been widely used in supramolecular chemistry. However, their π-conjugations are very weak, as the methylene bridges disrupt the electronic communication between π orbitals of the aromatic units. Herein, we successfully synthesized a series of silapillar[n]arenes (n = 4, 6, and 8) using silylene bridging. These showed enhanced electronic conjugation compared with the parent pillar[n]arenes because of σ*-π* conjugation between σ* (Si-C) orbitals and π* orbitals of the benzenes. Owing to the longer Si-C bond compared with the C-C bond, silylene-bridging provides additional structural flexibility into the pillar[n]arene scaffolds; a strained silapillar[4]arene was formed, which is unavailable in the parent pillar[n]arenes because of the steric requirements. Furthermore, silapillar[n]arenes displayed interesting size-dependent structural and optical properties.

Clamparene: Synthesis, Structure, and Its Application in Spontaneous Formation of 3D Porous Crystals

Macrocyclic arenes have emerged as pivotal scaffolds in supramolecular chemistry. Despite their significant contributions to molecular recognition and diverse applications, challenges persist in the development of macrocyclic arene-based crystalline materials, particularly in achieving porosity and addressing limitations in adsorption efficiency resulting from the small cavity sizes of existing macrocyclic arenes. In this study, we present the design and synthesis of a novel macrocyclic arene, clamparene (CLP), featuring a rigid backbone, easy synthesis, and a sizable cavity. CLP self-assembles into one-dimensional sub-nanotubes that further organize into a three-dimensional porous framework in the solid state. The crystalline solid of CLP exhibits potential as a porous crystalline adsorbent for various benzene-based contaminants with rapid adsorption kinetics, large uptake amounts, and good recyclability.

Industrial Separation Challenges: How Does Supramolecular Chemistry Help?

The chemical industry and the chemical processes underscoring it are under intense scrutiny as the demands for the transition to more sustainable and environmentally friendly practices are increasing. Traditional industrial separation systems, such as thermally driven distillation for hydrocarbon purification, are energy intensive. The development of more energy efficient separation technologies is thus emerging as a critical need, as is the creation of new materials that may permit a transition away from classic distillation-based separations. In this Perspective, we focus on porous organic cages and macrocycles that can adsorb guest molecules selectively through various host-guest interactions and permit molecular sieving behavior at the molecular level. Specifically, we summarize the recent advances where receptor-based adsorbent materials have been shown to be effective for industrially relevant hydrocarbon separations, highlighting the underlying host-guest interactions that impart selectivity and permit the observed separations. This approach to sustainable separations is currently in its infancy. Nevertheless, several receptor-based adsorbent materials with extrinsic/intrinsic voids or special functional groups have been reported in recent years that can selectively capture various targeted guest molecules. We believe that the understanding of the interactions that drive selectivity at a molecular level accruing from these initial systems will permit an ever-more-effective "bottom-up" design of tailored molecular sieves that, in due course, will allow adsorbent material-based approaches to separations to transition from the laboratory into an industrial setting.

Potential of nonporous adaptive crystals for hydrocarbon separation

Hydrocarbon separation is an important process in the field of petrochemical industry, which provides a variety of raw materials for industrial production and a strong support for the development of national economy. However, traditional separation processes involve huge energy consumption. Adsorptive separation based on nonporous adaptive crystal (NAC) materials is considered as an attractive green alternative to traditional energy-intensive separation technologies due to its advantages of low energy consumption, high chemical and thermal stability, excellent selective adsorption and separation performance, and outstanding recyclability. Considering the exceptional potential of NAC materials for hydrocarbon separation, this review comprehensively summarizes recent advances in various supramolecular host-based NACs. Moreover, the current challenges and future directions are illustrated in detail. It is expected that this review will provide useful and timely references for researchers in this area. Based on a large number of state-of-the-art studies, the review will definitely advance the development of NAC materials for hydrocarbon separation and stimulate more interesting studies in related fields.

Separation of Cyclohexanone and Cyclohexanol by Adaptive Pillar[5]arene Cocrystals Accompanied by Vapochromic Behavior

The separation of cyclohexanone (CHA-one) and cyclohexanol (CHA-ol) mixtures is of great importance in the chemical industry. Current technology exploits multiple steps of energy-intensive rectification due to their close boiling points. Herein, we report a new and energy-efficient adsorptive separation method employing binary adaptive macrocycle cocrystals (MCCs) built with π-electron-rich pillar[5]arene (P5) and an electron-deficient naphthalenediimide derivative (NDI) that can selectively separate CHA-one from an equimolar CHA-one/CHA-ol mixture with >99% purity. Intriguingly, this adsorptive separation process is accompanied by vapochromic behavior from pink to dark brown. Single-crystal and powder X-ray diffraction analyses reveal that the adsorptive selectivity and vapochromic property are derived from the CHA-one vapor inside the cocrystal lattice voids triggering solid-state structural transformations to yield charge-transfer (CT) cocrystals. Moreover, the reversible transformations make the cocrystalline materials highly recyclable.

Per-Arylation of Pillar[n]arenes: An Effective Tool to Modify the Properties of Macrocycles

Installation of various substituents is a reliable and versatile way to alter the properties of macrocyclic molecules, but high-yield and controlled methods are not always available especially for multifold reactions. Herein, we report 10- and 12-fold introduction of aryl substituents onto both rims of cylinder-shaped pillar[n]arenes, which usually have alkoxy substituents slanting to the cylinder axes. Although alkoxy pillar[5]arenes exist as D₅-symmetric enantiomeric pairs, arylated pillar[5]arenes provide crushed single-crystal structures and stereoisomerism including C₂-symmetric conformations depending on the aryl groups. Pillar[n]arenes with 2-benzofuranyl groups display bright fluorescence with quantum yields of 88-90% and no host-guest complexation with electron-deficient molecules in solution due to large deviation from alkoxy compounds. A benzofuran-appended pillar[6]arene instead captures small gaseous molecules in the solid state, probably owing to outside spaces surrounded by aromatic rings.

Unravelling Structural Dynamics, Supramolecular Behavior, and Chiroptical Properties of Enantiomerically Pure Macrocyclic Tertiary Ureas and Thioureas

The introduction of urea or thiourea functionality to the macrocycle skeleton represents an alternative way to control conformational dynamics of chiral, polyamines of a figure-shaped periodical structure. Formally highly symmetrical, these macrocycles may adapt diverse conformations, depending on the nature of an amide linker and on a substitution pattern within the aromatic units. The type of heteroatom X in the N-C(═X)-N units present in each vertex of the macrocycle core constitutes the main factor determining the chiroptical properties. In contrast to the urea-containing derivatives, the electronic circular dichroism of thioureas is controlled by the chiral neighborhood closest to the chromophore. The dynamically induced exciton couplet is observed when the biphenyl chromophores are present in the macrocycle core. In the solid state, the seemingly disordered molecules may create ordered networks stabilized by intermolecular S···halogen, H···halogen, and S···H interactions. The presence of two bromine substituents in each aromatic unit in thiourea-derived trianglamine gives rise to a self-sorting phenomenon in the crystal. In solution, this particular macrocycle exists as a dynamic equimolar mixture of two conformational diastereoisomers, differing in the spatial (clockwise and counter clockwise) arrangement of the C-Br bonds. In the crystal lattice, macrocycles of a given handedness assemble into homohelical layers.

Synthesis of Carborane-Backbone Metallacycles for Highly Selective Capture of n-Pentane

The specific recognition and separation of alkanes with similar molecular structures and close boiling points face significant scientific challenges and industrial demands. Here, rectangular carborane-based metallacycles were designed to selectively encapsulate n-pentane from n-pentane, iso-pentane, and cyclo-pentane mixtures in a simple-to-operate and more energy-efficient way. Metallacycle 1, bearing 1,2-di(4-pyridyl) ethylene, can selectively separate n-pentane from these three-component mixtures with a purity of 97%. The selectivity is ascribed to the capture of the preferred guest with matching size, C-H···π interactions, and potential B-H^δ-···H^δ+-C interactions. Besides, the removal of n-pentane gives rise to original guest-free carborane-based metallacycles, which can be recycled without losing performance. Considering the variety of substituted carborane derivatives, metal ions, and organic linkers, these new carborane-based supramolecular coordination complexes (SCCs) may be broadly applicable to other challenging recognition and separation systems with good performance.

Energy‐Efficient Iodine Uptake by a Molecular Host⋅Guest Crystal

Recently, porous organic crystals (POC) based on macrocycles have shown exceptional sorption and separation properties. Yet, the impact of guest presence inside a macrocycle prior to adsorption has not been studied. Here we show that the inclusion of trimethoxybenzyl-azaphosphatrane in the macrocycle cucurbit[8]uril (CB[8]) affords molecular porous host⋅guest crystals (PHGC-1) with radically new properties. Unactivated hydrated PHGC-1 adsorbed iodine spontaneously and selectively at room temperature and atmospheric pressure. The absence of (i) heat for material synthesis, (ii) moisture sensitivity, and (iii) energy-intensive steps for pore activation are attractive attributes for decreasing the energy costs. ¹ H NMR and DOSY were instrumental for monitoring the H₂ O/I₂ exchange. PHGC-1 crystals are non-centrosymmetric and I₂ -doped crystals showed markedly different second harmonic generation (SHG), which suggests that iodine doping could be used to modulate the non-linear optical properties of porous organic crystals.

Recent Advances in the Applications of Water-soluble Resorcinarene-based Deep Cavitands

We review here the use of container molecules known as cavitands for performing organic reactions in water. Central to these endeavors are binding forces found in water, and among the strongest of these is the hydrophobic effect. We describe how the hydrophobic effect can be used to drive organic molecule guests into the confined space of cavitand hosts. Other forces participating in guest binding include cation-π interactions, chalcogen bonding and even hydrogen bonding to water involved in the host structure. The reactions of guests take advantage of their contortions in the limited space of the cavitands which enhance macrocyclic and site-selective processes. The cavitands are applied to the removal of organic pollutants from water and to the separation of isomeric guests. Progress is described on maneuvering the containers from stoichiometric participation to roles as catalysts.

Biofiber waste derived zwitterionic and photocatalytic dye adsorbent: Switchable selectivity, in-situ degradation and multi-tasking application

Dye wastewater and discarded biofiber have brought huge pressure to sustainable developments of ecology and economy. By utilizing dopamine chemistry and benzophenone mediated "grafting onto" atom transfer radical polymerization (ATRP), this work reported a biomass adsorbent containing discarded wool substrate, photocatalytic PDA coating and zwitterionic polymer brushes for dyes removal. The grafted zwitterionic polymer brushes impart the material with not only high adsorption capacity and rapid adsorption rate, but also switchable adsorption selectivity and pH-controlled regeneration capability. Benefiting from such outstanding adsorption performance and excellent free-standing property, the adsorbent could fulfill diversified needs of both static and dynamic adsorptions. Under daylight, the constructed photocatalytic PDA coating could in-situ degrade the captured pollutant, thus achieving consecutive adsorption-degradation-regeneration utilization. Furthermore, through simple dip-coating and cleaner UV-irradiation techniques, the preparation process could be scaled up. This work contributes to both the upcycling of discarded biofiber waste and the development of advanced biomass adsorbent.

Adsorptive separation of picoline isomers by adaptive calix[3]acridan crystals

The exploration of macrocycle-based nonporous adaptive crystals (NACs) for adsorption and separation has been one of the hotspots in supramolecular chemistry and crystal engineering. Herein, we developed calix[3]acridan-based NACs to separate industrially important 4-picoline from its isomer mixtures with over 93.8% purity.

Biphen[n]arenes: Modular Synthesis, Customizable Cavity Sizes, and Diverse Skeletons

Macrocyclic compounds are fundamental tools in supramolecular chemistry and have been widely used in molecular recognition, biomedicine, and materials science. The construction of new macrocycles with distinctive structures and properties would unleash new opportunities for supramolecular chemistry. Traditionally popular macrocycles, e.g., cyclodextrins, calixarenes, cucurbiturils, and pillararenes, possess specific cavities that are usually less than 10 Å in diameter; they are normally suitable for accommodating small- or medium-sized guests but cannot engulf giant molecules or structures. Furthermore, the skeletons of traditional macrocycles are impoverished and incapable of being changed; functional substituents can be introduced only on their portals.Thus, it is very challenging to construct macrocycles with customizable cavity sizes and/or diverse backbones. We have developed a versatile and modular strategy for synthesizing macrocycles, namely, biphen[n]arenes (n = 3-8), based on the structure- or function-oriented replacement of reaction modules, functional modules, and linking modules. First, two reaction modules and one functional module are connected by Suzuki-Miyaura coupling to obtain a monomer having two reaction sites. Then Friedel-Crafts alkylation between the monomer and an aldehyde (linking module) serves to afford diversely functionalized macrocycles. Moreover, large macrocycles can be achieved by using long and rigid oligo(para-phenylene) monomers. Because of the modular synthesis and plentiful molecular supplies, the biphen[n]arenes showed interesting recognition properties for both small molecules and large polypeptides. Customizable functional backbones and binding sites endowed this new family of macrocycles with peculiar self-assembly properties and potential applications in gas chromatography, pollutant capture, and physisorptive separation. Biphen[n]arenes would be a promising family of workhorses in supramolecular chemistry.In this Account, we summarize our recent work on the chemistry of biphen[n]arenes. We introduce their design and modular synthesis, including systematic exploration for reaction modules, customizable cavity sizes, skeleton functionalization, pre- and postmodification, and molecular cages. Thereafter, we discuss their host-guest properties, involving the binding for small guests by cationic/anionic/neutral biphen[n]arenes, as well as the complexation of polypeptides by large quaterphen[n]arenes. In addition, we outline the self-assembly and potential applications of this new family of macrocycles. Finally, we forecast their further development. The chemistry of biphen[n]arenes is still in its infancy. Continued exploration will not only further expand the supramolecular toolbox but also open new avenues for the use of biphen[n]arenes in the fields of biology, pharmaceutical science, and materials science.

Rim-differentiated pillar[5]arene based nonporous adaptive crystals

The first rim-differentiated pillar[5]arene based nonporous adaptive crystals (NACs) were developed and used to separate dichloromethane from a halomethane mixture with 99.1% purity.

Separation of pyrrolidine from tetrahydrofuran by pillar[6]arene-based nonporous adaptive crystals

Pyrrolidine, an important feedstock in the chemical industry, is commonly produced via vapor-phase catalytic ammoniation of tetrahydrofuran (THF). Obtaining pyrrolidine with high purity and low energy cost has extremely high economic and environmental values. Here we offer a rapid and energy-saving method for adsorptive separation of pyrrolidine and THF by using nonporous adaptive crystals of per-ethyl pillar[6]arene (EtP6). EtP6 crystals show a superior preference towards pyrrolidine in 50 : 50 (v/v) pyrrolidine/THF mixture vapor, resulting in rapid separation. The purity of pyrrolidine reaches 95% in 15 min of separation, and after 2 h, the purity is found to be 99.9%. Single-crystal structures demonstrate that the selectivity is based on the stability difference of host–guest structures after uptake of THF or pyrrolidine and non-covalent interactions in the crystals. Besides, EtP6 crystals can be recycled efficiently after the separation process owing to reversible transformations between the guest-free and guest-loaded EtP6.

Here we offer a rapid and energy-saving method for adsorptive separation of pyrrolidine and tetrahydrofuran by using nonporous adaptive crystals of per-ethyl pillar[6]arene.

Enhanced Desalination Polyamide Membranes Incorporating Pillar[5]arene through in-Situ Aggregation-Interfacial Polymerization-isAGRIP

Membrane-based desalination have an important role in water purification. Inspired by highly performant biological proteins, artificial water channels (AWC) have been proposed as active components to overcome the permeability/selectivity trade-off of desalination processes. Promising performances have been reported with Pillararene crystalline phases revealing impressive molecular-scale separation performances, when used as selective porous materials. Herein, we demonstrate that Pillar[5]arene PA[5] aggregates are in-situ generated and incorporated during the interfacial polymerization, within industrially relevant reverse osmosis polyamide-PA membranes. In particular, we explore the best combination between PA[5] aggregates and m-phenylenediamine (MPD) and trimesoylchloride (TMC) monomers to achieve their seamless incorporation in a defect-free hybrid polyamide PA[5]-PA membranes for enhanced desalination. The performances of the reference and hybrid membranes are evaluated by cross-flow filtration under real reverse osmosis conditions (15.5 bar of applied pressure) by filtration of brackish feed streams. The optimized membranes achieve a ∼40 % improvement, in water permeance of ∼2.76±0.5 L m^-2  h^-1  bar^-1 and high 99.5 % NaCl rejection with respect to the reference TFC membrane and a similar water permeance compared to one of the best commercial BW30 membranes (3.0 L m^-2  h^-1  bar^-1 and 99.5 % NaCl rejection).

Tuning the porosity of triangular supramolecular adsorbents for superior haloalkane isomer separations

Distillation-free separations of haloalkane isomers represents a persistent challenge for the chemical industry. Several classic molecular sorbents show high selectivity in the context of such separations; however, most suffer from limited tunability or poor stability. Herein, we report the results of a comparative study involving three trianglamine and trianglimine macrocycles as supramolecular adsorbents for the selective separation of halobutane isomers. Methylene-bridged trianglamine, TA, was found to capture preferentially 1-chlorobutane (1-CBU) from a mixture of 1-CBU and 2-chlorobutane (2-CBU) with a purity of 98.1%. It also separates 1-bromobutane (1-BBU) from a mixture of 1-BBU and 2-bromobutane (2-BBU) with a purity of 96.4%. The observed selectivity is ascribed to the thermodynamic stability of the TA-based host–guest complexes. Based on single crystal X-ray diffraction analyses, a [3]pseudorotaxane structure (2TA⊃1-CBU) is formed between TA and 1-CBU that is characterized by an increased level of noncovalent interactions compared to the corresponding [2]pseudorotaxane structure seen for TA⊃2-CBU. We believe that molecular sorbents that rely on specific molecular recognition events, such as the triangular pores detailed here, will prove useful as next generation sorbents in energy-efficient separations.

The methylene-bridged trianglamine (TA) can selectively capture 1-chlorobutane from a mixture of 1-chlorobutane and 2-chlorobutane due to the greater thermodynamic stability of the TA-based host–guest complex formed with 1-chlorobutane.

High purity separation of n-pentane from neopentane using a nano-crystal of zeolite Y

A method for the separation of a mixture of n-pentane and neopentane using a nano-crystallite of zeolite Y is reported. This method judiciously combines two well-known, counter-intuitive phenomena, the levitation and the blowtorch effects. The result is that the two components are separated by being driven to the opposite ends of the zeolite column. The calculations are based on the non-equilibrium Monte Carlo method with moves from a region at one temperature to a region at another temperature. The necessary acceptance probability for such moves has been derived here on the basis of stationary solution of an inhomogeneous Fokker-Planck equation. Simulations have been carried out with a realistic and experimentally relevant Gaussian hot zone and also a square hot zone, both of which lead to very good separation. Simulations without the hot zones do not show any separation. The results are reported at a loading of 1 molecule per cage. The temperature of the hot zone is just ∼30 K higher than the ambient temperature. The separation factors of the order of 10¹⁷ are achieved using single crystals of zeolite, which are less than 1 μm long. The conditions for including the hot zone may be experimentally realizable in the future considering the rapid advances in nanoscale thermometry. The separation process is likely to be energetically more efficient by several orders of magnitude as compared to the existing methods of separation, making the method very green.

A cucurbituril-pillararene ring-on-ring complex

A new type of non-intertwined ring-on-ring assembly was formed by the portal binding between a perfunctionalized polycationic pillar[5]arene and a cucurbit[10]uril, demonstrating a facile approach to solubilize a large macrocycle in water. Different binding behaviors towards guests were observed for the high-order complex, enriching the functional supramolecular systems.

Selective separation of branched alkane vapor by thiacalixarene supramolecular crystals having shape-recognition properties

Activated crystals of a supramolecular assembly of bromothiacalix[4]arene propyl ether with preorganized channel-like voids can selectively and effectively adsorb isooctane vapor from a vapor mixture of isooctane and n-heptane.

Supramolecular exfoliation of layer silicate clay by novel cationic pillar[5]arene intercalants

Clays are multi-layered inorganic materials that can be used to prepare nanocomposite fillers. Because the multi-layered structure is thermodynamically stable, it is difficult to change a multi-layered material into single layers to improve its dispersity. Previously, clays were modified with dodecylammonium cations to promote complexation with nylon 6, nylon 66, polypropylene, polyethylene, polystyrene, and polycaprolactone to increase the mechanical strength (and/or thermal stability) of the composite material; however, complete exfoliation could not be achieved in these composites. In this study, pillar[5]arenes are synthesized and functionalized with ten cationic substituents as novel intercalants for modifying bentonite clay, which is a multi-layered metal-cation-containing silicate. The pillar[5]arenes exfoliate the clay by forming polyrotaxanes with poly(ethylene glycol) through host–guest interactions.

Intrinsically Porous Molecular Materials (IPMs) for Natural Gas and Benzene Derivatives Separations

ConspectusSeparating and purifying chemicals without heat would go a long way toward reducing the overall energy consumption and the harmful environmental footprint of the process. Molecular separation processes are critical for the production of raw materials, commodity chemicals, and specialty fuels. Over 50% of the energy used in the production of these materials is spent on separation and purification processes, which primarily includes vacuum and cryogenic distillations. Chemical manufacturers are now investigating modest thermal approaches, such as membranes and adsorbent materials, as they are more cognizant than ever of the need to save energy and prevent pollution. Porous materials, such as zeolites, metal-organic frameworks (MOFs), and covalent organic frameworks (COFs), have dominated the field of industrial separations as their high surface areas and robust pores make them ideal candidates for molecular separations of gases and hydrocarbons. Separation processes involving porous materials can save 70%-90% of energy costs compared to that of thermally driven distillations. However, most porous materials have low thermal, chemical, and moisture stability, in addition to limited solution processability, which tremendously constrain their broad industrial translation. Intrinsically porous molecular materials (IPMs) are a subclass of porous molecular materials that are comprised of molecular host macrocycles or cages that absorb guests in or around their intrinsic cavity. IPMs range from discrete porous molecules to assemblies with amorphous or highly crystalline structures that are held together by weak supramolecular interactions. Compared to the coordination or dynamic covalent bond-constructed porous frameworks, IPMs possess high thermal, chemical, and moisture stability and maintain their porosity under critical conditions. Moreover, the intrinsic porosity endows IPMs with excellent host-guest properties in solid, liquid (organic or aqueous), and gas states, which can be further utilized to construct diverse separation strategies, such as solid-gas adsorption, solid-liquid absorption, and liquid-liquid extraction. The diversity of host-guest interactions in the engineered IPMs affords a plethora of possibilities for the development of the ideal "molecular sieves". Herein, we present a different take on the applicability of intrinsically porous materials such as cyclodextrin (CD), cucurbiturils (CB), pillararene (P), trianglamines (T), and porous organic cages (POCs) that showed an impressive performance in gas purification and benzene derivatives separation. IPMs can be easily scaled up and are quite stable and solution processable that consequently facilitates a favorable technological transformation from the traditional energy-intensive separations. We will account for the main advances in molecular host-guest chemistry to design "on-demand" separation processes and also outline future challenges and opportunities for this promising technology.

Selective complexation and efficient separation of cis/trans-1,2-dichloroethene isomers by a pillar[5]arene

The complexation and separation of industrially important cis- and trans-1,2-dichloroethene (cis- and trans-DCE) isomers using perethylated pillar[5]arene (EtP5) are described. EtP5 exhibits considerable binding capability for the trans-DCE isomer over the cis-DCE in organic solution. Furthermore, nonporous adaptive crystals (NACs) of EtP5 can efficiently separate trans-DCE from a 50 : 50 (v/v) cis/trans-isomer mixture.

The complexation and separation of industrially important cis- and trans-1,2-dichloroethene (cis- and trans-DCE) isomers using perethylated pillar[5]arene (EtP5) are described.

Pillar[6]arene acts as a biosensor for quantitative detection of a vitamin metabolite in crude biological samples

Metabolic syndrome is associated with obesity, hypertension, and dyslipidemia, and increased cardiovascular risk. Therefore, quick and accurate measurements of specific metabolites are critical for diagnosis; however, detection methods are limited. Here we describe the synthesis of pillar[n]arenes to target 1-methylnicotinamide (1-MNA), which is one metabolite of vitamin B3 (nicotinamide) produced by the cancer-associated nicotinamide N-methyltransferase (NNMT). We found that water-soluble pillar[5]arene (P5A) forms host-guest complexes with both 1-MNA and nicotinamide, and water-soluble pillar[6]arene (P6A) selectively binds to 1-MNA at the micromolar level. P6A can be used as a "turn-off sensor" by photoinduced electron transfer (detection limit is 4.38 × 10^-6 M). In our cell-free reaction, P6A is used to quantitatively monitor the activity of NNMT. Moreover, studies using NNMT-deficient mice reveal that P6A exclusively binds to 1-MNA in crude urinary samples. Our findings demonstrate that P6A can be used as a biosensor to quantify 1-MNA in crude biological samples.

Adsorptive Separation of Benzene, Cyclohexene, and Cyclohexane by Amorphous Nonporous Amide Naphthotube Solids

Benzene hydrogenation is an important industrial process. The reaction is incomplete, resulting in a mixture of benzene, cyclohexane, and/or cyclohexene that have to be separated before any further reactions. The currently used extractive and azeotropic distillations are operationally complex and energy intensive. Adsorptive separation provides an alternative energy-efficient method. However, the separation of the ternary mixture by adsorptive separation has not yet been reported. In the present research, we report two macrocyclic hosts with hydrogen-bonding sites in their cavities that are able to separate the ternary mixture of benzene, cyclohexene, and cyclohexane. N-H⋅⋅⋅π interactions were found to play a key role in the selective separation. In addition, fast adsorption, high loading ratios, and easy recycling are achieved with the present system, which is promising for practical applications.

Synthetic Macrocycle-Based Nonporous Adaptive Crystals for Molecular Separation

The exploitation of new materials for adsorptive separation of industrially important hydrocarbons is of great importance in both scientific research and petrochemical industry. Nonporous adaptive crystals (NACs) as a robust class of synthetic materials have drawn much attention during the past five years for their superior performance in adsorption and separation. Pillararenes are the main family of macrocyclic arenes used for NACs construction, where the structure-function relationship has been intensively studied. In the past two years, some emerging types of synthetic macrocyclic arenes have been successfully brought into this research field, showing the gradual enrichment and diversification of NACs materials. This Minireview summarizes the recent advances of synthetic macrocycle-based NACs, which are categorized by various practical applications in molecular separation. Besides, NACs-based vapochromic supramolecular systems are also discussed. Finally, future perspectives and challenges of NACs are given. We envisage that this Minireview will be a useful and timely reference for those who are interested in new molecular and supramolecular crystals for storage and separation applications.

Host-Guest Complexations Between Pillar[6]arenes and Neutral Pentaerythritol Derivatives

It is demonstrated that three kinds of neutral pentaerythritol derivatives possess promising host-guest complexations with pillar[6]arenes both in solution and in the solid state. The inclusion structures were characterized by NMR spectroscopy and X-ray crystallography. The complexation properties in different solvents were also investigated.

Tubularenes

We report the synthesis and characterization of conjugated, conformationally rigid, and electroactive carbon-based nanotubes that we term tubularenes. These structures are constructed from a resorcin[n b]arene base. Cyclization of the conjugated aromatic nanotube is achieved in one-pot eight-fold C-C bond formation via Suzuki-Miyaura cross-coupling. DFT calculations indicate a buildup of strain energy in excess of 90 kcal mol-1. The resulting architectures contain large internal void spaces >260 Å3, are fluorescent, and able to accept up to 4 electrons. This represents the first scaffolding approach that provides conjugated nanotube architectures.

Alkane Shape- and Size-Recognized Selective Vapor Sorption in "Channel-Like" Crystals Based on Thiacalixarene Assemblies

Alkanes composed of C-C and C-H show a low electric polarization, and therefore, there is only very weak interaction between alkanes and adsorbents. Thus, it is difficult to separate a specific alkane from a mixture of alkanes by adsorption. Here, two activated "channel-like" crystals generated from brominated thiacalix[4]arene propyl ethers, which adopt 1,3-alternate and partial cone conformations, recognize specific alkane vapors depending on alkane-shape and -size, sorting in three-type alkane guests such as linear, branched, and cyclic alkanes. Two activated crystals, which are prepared by removal of solvent upon heating under reduced pressure, incorporate branched and/or cyclic alkane vapors by a unique "gate-opening" mechanism via a crystal transformation in the process. Linear alkane vapors do not trigger gate opening and are not taken up by the activated crystals. The shape and size molecular-recognition properties of the activated crystals promises considerable usefulness for the separation of linear, branched, and cyclic alkanes.

Supramolecular-Macrocycle-Based Crystalline Organic Materials

Supramolecular macrocycles are well known as guest receptors in supramolecular chemistry, especially host-guest chemistry. In addition to their wide applications in host-guest chemistry and related areas, macrocycles have also been employed to construct crystalline organic materials (COMs) owing to their particular structures that combine both rigidity and adaptivity. There are two main types of supramolecular-macrocycle-based COMs: those constructed from macrocycles themselves and those prepared from macrocycles with other organic linkers. This review summarizes recent developments in supramolecular-macrocycle-based COMs, which are categorized by various types of macrocycles, including cyclodextrins, calixarenes, resorcinarenes, pyrogalloarenes, cucurbiturils, pillararenes, and others. Effort is made to focus on the structures of supramolecular-macrocycle-based COMs and their structure-function relationships. In addition, the application of supramolecular-macrocycle-based COMs in gas storage or separation, molecular separation, solid-state electrolytes, proton conduction, iodine capture, water or environmental treatment, etc., are also presented. Finally, perspectives and future challenges in the field of supramolecular-macrocycle-based COMs are discussed.

Obvious vapochromic color changes of a pillar[6]arene containing one benzoquinone unit with a mechanochromic change before vapor exposure

We developed a color changeable aromatic vapor detection system by combining the mechanochromism and vapochromism of pillar[6]arene containing one benzoquinone unit. The color of pillar[6]arene solid was changed by mechanochromism before vapor exposure. Different aromatic vapors then induced an obvious vapochromic color change from dark red to light orange or vice versa.

Highly Selective Removal of Trace Isomers by Nonporous Adaptive Pillararene Crystals for Chlorobutane Purification

Removal of trace chlorobutane (CB) isomers is highly desired to produce high grade 1-chlorobutane (1-CB) and 2-chlorobutane (2-CB). Here, we report that nonporous adaptive crystals (NACs) of perethylated pillar[5]arene (EtP5) and pillar[6]arene (EtP6) effectively remove trace CB isomers. EtP5 NACs can remove trace 1-CB (2%) from 2-CB to improve its purity from 98.0% to 99.9%, while EtP6 NACs can remove trace 2-CB from 1-CB to improve its purity from 98.0% to 99.9%. The adsorption of trace CB isomers results in the formation of new CB-loaded crystal structures, whose thermostability is higher than their corresponding isomer-loaded structures. This determines the selectivity of NACs toward the trace CB isomers. Reversible transformations between nonporous guest-free and guest-loaded structures make EtP5 and EtP6 highly recyclable.