Formation of a Highly Reactive Cobalt Nanocluster Crystal within a Highly Negatively Charged Porous Coordination Cage

Co-Cu nanoparticles uniformly embedded in the intra-crystalline mesoporous Silicalite-1 for catalytic ammonia borane hydrolysis

Zeolite-encaged metal nanoparticles (NPs) catalysts are emerging as a new frontier owing to their superior ability to stabilize the structure and catalytic performance in the thermal and environmental catalytic reaction. However, the pore size below 2 nm of the conventional zeolites usually limits the accessibility of metal active sites. Herein, Co-Cu NPs of about 2.5-3.5 nm were uniformly encapsulated in the intracrystalline mesoporous Silicalite-1 (S-1) through alkali-treatment ligand-assisted strategy. The obtained sample (termed CoxCu1-x@HS-1) exhibited efficient activity and stability in the ammonia borane hydrolysis with the highest TOF value of 21.46 molH2·molMe-1·min-1. UV-vis DRS spectra indicated that intracrystalline mesopores have greatly improved the openness and accessibility of the active sites, thus improving their catalytic performance. The introduction of Cu regulates the electronic properties of Co, further increasing hydrogen production activity. This research creates new prospects to design other high-performance hierarchical porous zeolite-confined metal/metal oxide catalysts.

Ultrafine Ni-MoOx Nanoparticles Anchored on Nitrogen-Doped Carbon Nanosheets: A Highly Efficient Noble-Metal-Free Catalyst for Ammonia Borane Hydrolysis

The development of low-cost and high-efficiency catalysts for the hydrolytic dehydrogenation of ammonia borane (AB, NH3BH3) is still a challenging technology. Herein, ultrafine MoOx-doped Ni nanoparticles (~3.0 nm) were anchored on g-C3N4@glucose-derived nitrogen-doped carbon nanosheets via a phosphate-mediated method. The strong adsorption of phosphate-mediated nitrogen-doped carbon nanosheets (PNCS) for metal ions is a key factor for the preparation of ultrasmall Ni nanoparticles (NPs). Notably, the alkaline environment formed by the reduction of metal ions removes the phosphate from the PNCS surface to generate P-free (P)NCS so that the phosphate does not participate in the subsequent catalytic reaction. The synthesized Ni-MoOx/(P)NCS catalysts exhibited outstanding catalytic properties for the hydrolysis of AB, with a high turnover frequency (TOF) value of up to 85.7 min-1, comparable to the most efficient noble-metal-free catalysts and commercial Pt/C catalyst ever reported for catalytic hydrogen production from AB hydrolysis. The superior performance of Ni-MoOx/(P)NCS can be ascribed to its well-dispersed ultrafine metal NPs, abundant surface basic sites, and electron-rich nickel species induced by strong electronic interactions between Ni-MoOx and (P)NCS. The strategy of combining multiple modification measures adopted in this study provides new insights into the development of economical and high-efficiency noble-metal-free catalysts for energy catalysis applications.

Recent progress in iodine capture by macrocycles and cages

The effective capture of radioiodine is vital to the development of the nuclear industry and ecological environmental protection. There is, therefore, a continuously growing research exploration in various types of solid-state materials for iodine capture. During the last decade, the potential of using macrocycle and cage-based supramolecular materials in effective uptake and separation of radioactive iodine has been demonstrated. Interest in the application of these materials in iodine capture originates from their diversified porous characteristics, abundant host-guest chemistry, high iodine affinity and adsorption capacity, high stability in various environments, facile modification and functionalization, and intrinsic structural flexibility, among other attributes. Herein, recent progress in macrocycle and cage-based solid-state materials, including pure discrete macrocycles and cages, and their polymeric forms, for iodine capture is summarized and discussed with an emphasis on iodine capture capacities, mechanisms, and design strategies.

Recent advances in porous molecular cages for photocatalytic organic conversions

Photocatalytic organic conversion is considered an efficient, environmentally friendly, and energy-saving strategy for organic synthesis. In recent decades, the molecular cage has emerged as a creative functional material with broad applications in host-guest recognition, drug delivery, catalysis, intelligent materials and other fields. Based on the unique properties of porous molecular cage materials, they provide an ideal platform for leveraging pre-structuring in catalytic reactions and show great potential in various photocatalytic organic reactions. As a result, they have emerged as promising alternatives to conventional molecules or inorganic photocatalysts in redox processes. In this Review, the synthesis strategies based on coordination cages and organic cages, as well as their recent progress in photocatalytic organic conversion, are comprehensively summarized. Finally, we deliver the persistent challenges associated with porous molecular cage compounds that need to be overcome for further development in this field.

A cage-on-MOF strategy to coordinatively functionalize mesoporous MOFs for manipulating selectivity in adsorption and catalysis

Functionalizing porous materials with capping agents generates hybrid materials with enhanced properties, while the challenge is how to improve the selectivity and maintain the porosity of the parent framework. Herein, we developed a "Cage-on-MOF" strategy to tune the recognition and catalytic properties of MOFs without impairing their porosity. Two types of porous coordination cages (PCCs) of opposite charges containing secondary binding groups were developed to coordinatively functionalize two distinct porous MOFs, namely MOF@PCC nanocomposites. We demonstrated that the surface-capped PCCs can act as "modulators" to effectively tune the surface charge, stability, and adsorption behavior of different host MOF particles. More importantly, the MOF@PCCs can serve as selective heterogeneous catalysts for condensation reactions to achieve reversed product selectivity and excellent recyclability. This work sets the foundation for using molecular cages as porous surface-capping agents to functionalize and manipulate another porous material, without affecting the intrinsic properties of the parent framework.

Atomically accurate structural tailoring of thiacalix[4]arene-protected copper(II)-based metallamacrocycles

Accurate manipulation of ligands at specific sites in robust clusters is attractive but difficult, especially for those ligands that coordinate in intricate binding patterns. By linking the shuttlecock-like {Cu₄(μ₄-Cl)TC4A} motif and the phenylphosphate (PhPO₃^2-) ligand, we elaborately design and synthesize two Cu(II)-thiacalix[4]arene metallamacrocycles (MMCs), namely Cu₁₂L₃ and Cu₁₆L₄, which have regular triangular and quadrilateral topologies, respectively. While keeping the core intact, the Cl^- and PhPO₃^2- in those two MMCs, which coordinated in a μ₄-bridging fashion, can be accurately substituted with salicylate ligands. Theoretical calculations have been carried out to reveal the effect of ligand tailoring on the electronic structure of clusters. Structural regulation can affect the catalytic activity of these clusters, which has been verified by using the clusters as catalysts for selective sulfide oxidation.

Porous Salts as Platforms for Heterogeneous Catalysis

The preparation of a new class of reactive porous solids, prepared via straightforward salt metathesis reactions, is described here. Reaction of the dimethylammonium salt of a magnesium-based porous coordination cage with the chloride salt of [Cr^II Cl(Me₄ cyclam)]⁺ affords a porous solid with concomitant removal of dimethylammonium chloride. The salt consists of the ions combined in the expected ratio based on their charge as confirmed by UV-vis and X-ray photoelectron spectroscopies, ion chromatography (IC), and inductively coupled plasma mass spectrometry (ICP-MS). The porous salt boasts a Brunauer-Emmett-Teller (BET) surface area of 213 m²  g^-1 . Single crystal X-ray diffraction reveals the chromium(II) cations in the structure reside in the interstitial space between porous cages. Importantly, the chromium(II) centers, previously shown to react with O₂ to afford reactive chromium(III)-superoxide adducts, are still accessible in the solid state as confirmed by UV-vis spectroscopy. The site-isolated reactive centers have competence toward hydrogen atom abstraction chemistry and display significantly increased stability and reactivity as compared to dissolved ions.

Organo-macrocycle-containing hierarchical metal-organic frameworks and cages: design, structures, and applications

Developing hierarchical ordered systems is challenging. Using organo-macrocycles to construct metal-organic frameworks (MOFs) and porous coordination cages (PCCs) provides an efficient way to obtain hierarchical assemblies. Macrocycles, such as crown ethers, cyclodextrins, calixarenes, cucurbiturils, and pillararenes, can be incorporated within MOFs/PCCs and they also endow the resultant composites with enhanced properties and functionalities. This review summarizes recent developments of organo-macrocycle-containing hierarchical MOFs/PCCs, emphasizing applications and structure-property relationships of these hierarchically porous materials. This review provides insights for future research on hierarchical self-assembly using macrocycles as building blocks and functional ligands to extend the applications of the composites.

Ancillary ligand-regulated Ti(IV)-based metallocalixarene coordination cages for photocatalytic H2 evolution

High-valence Ti(IV)-based metallocalixarene coordination cages that are linked by oriented ancillary ligands are unknown so far. Herein, the first family of tunable calixarene-based coordination cages of Ti(IV) with a framework formula [Ti₁₂(OⁱPr)₁₂(TBC[4])₆L₆] have been assembled from six {Ti₂(OⁱPr)₂(TBC[4])}²⁺ nodes and six pyridinedicarboxylic ligands. Furthermore, the {Ti12L6} cage showed strong photocatalytic H₂ evolution activity, and DFT studies were performed to explore its electronic structure.

Metal–Organic Cages: Applications in Organic Reactions

Supramolecular metal–organic cages, a class of molecular containers formed via coordination-driven self-assembly, have attracted sustained attention for their applications in catalysis, due to their structural aesthetics and unique properties. Their inherent confined cavity is considered to be analogous to the binding pocket of enzymes, and the facile tunability of building blocks offers a diverse platform for enzyme mimics to promote organic reactions. This minireview covers the recent progress of supramolecular metal–organic coordination cages for boosting organic reactions as reaction vessels or catalysts. The developments in the utilizations of the metal–organic cages for accelerating the organic reactions, improving the selectivity of the reactions are summarized. In addition, recent developments and successes in tandem or cascade reactions promoted by supramolecular metal–organic cages are discussed.

An ultrastable Ti-based metallocalixarene nanocage cluster with photocatalytic amine oxidation activity

Polyhedral metallocalixarene nanocage clusters based on pure Ti(IV) ions are to our knowledge unknown hitherto. Herein we report the first Ti(IV)-based metallocalixarene nanocage cluster by assembling a [Ti₁₃O₁₄] cage with six t-butylcalix[4]arene molecules. Notably, the cluster exhibits extraordinary stability in high-concentration acid/alkali solutions and can act as a stable photocatalyst to catalyze the oxidation of ammonia to imines.

Molecular Cavity for Catalysis and Formation of Metal Nanoparticles for Use in Catalysis

The employment of weak intermolecular interactions in supramolecular chemistry offers an alternative approach to project artificial chemical environments like the active sites of enzymes. Discrete molecular architectures with defined shapes and geometries have become a revolutionary field of research in recent years because of their intrinsic porosity and ease of synthesis using dynamic non-covalent/covalent interactions. Several porous molecular cages have been constructed from simple building blocks by self-assembly, which undergoes many self-correction processes to form the final architecture. These supramolecular systems have been developed to demonstrate numerous applications, such as guest stabilization, drug delivery, catalysis, smart materials, and many other related fields. In this respect, catalysis in confined nanospaces using such supramolecular cages has seen significant growth over the years. These porous discrete cages contain suitable apertures for easy intake of substrates and smooth release of products to exhibit exceptional catalytic efficacy. This review highlights recent advancements in catalytic activity influenced by the nanocavities of hydrogen-bonded cages, metal-ligand coordination cages, and dynamic or reversible covalently bonded organic cages in different solvent media. Synthetic strategies for these three types of supramolecular systems are discussed briefly and follow similar and simplistic approaches manifested by simple starting materials and benign conditions. These examples demonstrate the progress of various functionalized molecular cages for specific chemical transformations in aqueous and nonaqueous media. Finally, we discuss the enduring challenges related to porous cage compounds that need to be overcome for further developments in this field of work.

A coordination cage hosting ultrafine and highly catalytically active gold nanoparticles

Ultrafine metal nanoparticles (MNPs) with size <2 nm are of great interest due to their superior catalytic capabilities. Herein, we report the size-controlled synthesis of gold nanoparticles (Au NPs) by using a thiacalixarene-based coordination cage CIAC-108 as a confined host or stabilizer. The Au NPs encapsulated within the cavity of CIAC-108 (Au@CIAC-108) show smaller size (∼1.3 nm) than the ones (∼4.7 nm) anchored on the surface of CIAC-108 (Au/CIAC-108). The cage-embedded Au NPs can be used as a homogeneous catalyst in a mixture of methanol and dichloromethane while as a heterogeneous catalyst in methanol. The homogeneous catalyst Au@CIAC-108-homo exhibits significantly enhanced catalytic activities toward nitroarene reduction and organic dye decomposition, as compared with its larger counterpart Au/CIAC-108-homo and its heterogeneous counterpart Au@CIAC-108-hetero. More importantly, the as-prepared Au@CIAC-108-homo possesses remarkable stability and durability.

The size-controlled synthesis of Au NPs was achieved by using a coordination cage CIAC-108 as a support. The Au NPs encapsulated within the cavity of CIAC-108 show smaller size (∼1.3 nm) than the ones (∼4.7 nm) anchored on the surface of CIAC-108.

Porous nickel and cobalt hexanuclear ring-like clusters built from two different kind of calixarene ligands – new molecular traps for small volatile molecules

The formation and structural analysis of porous hexanuclear ring-like cluster complexes built from two different kind of calixarene ligands is presented, together with their stability and vapor solvent sorption properties.

Impact of flexible succinate connectors on the formation of tetrasulfonylcalix[4]arene based nano-sized polynuclear cages: structural diversity and induced chirality study

The formation of three types of supramolecular coordination cages is described. Tetrasulfonylcalixarene, combined with metallic salts (Ni, Co and Zn) and the flexible succinate ligand, led to cages. H bonded induced chirality was observed for both isomorphous cages.

Controlling phase in low-nuclearity calixarene-capped porous coordination cages with ligand functionalization

Porosity in low-nuclearity coordination cages is relatively rare as cages with larger pore sizes are usually targeted as a way to increase gas adsorption capabilities in this promising class of...

Assembly of cobalt-p-sulfonatothiacalix[4]arene frameworks with phosphate, phosphite and phenylphosphonate ligands

Three cobalt-calixarene coordination frameworks, namely, {[Co4Cl(H4TC4AS)]4(HPO3)8}4− (CIAC-253), {[Co4Cl(H4TC4AS)]4(PO4)8}12− (CIAC-254) and {[Co4Cl(H4TC4AS)]3(Ph-PO3)6}3− (CIAC-255) were obtained by solvothermal reaction of a cobalt salt, sodium p-sulfonatothiacalix[4]arene (Na4H4TC4AS) and phosphate, phosphite and phosphonate ligands. In CIAC-253 and CIAC-254, the shuttlecock-like Co4Cl-(TC4AS) secondary building units (SBUs) are bridged by HPO3 2− or PO4 3− anions into two quadrilateral frameworks while in CIAC-255, the Co4Cl-(TC4AS) SBUs are linked into a triangular framework by phenylphosphonate anions. The supramolecular interactions between the phenyl groups of phosphonate and TC4AS play a crucial role in the formation of the triangle. Magnetic measurements revealed that all the cobalt(II) centers exhibit antiferromagnetic interactions.

Homogeneous Distribution of Pt16(C4O4SH5)26 Clusters in ZIF-67 for Efficient Hydrogen Generation and Oxygen Reduction

In recent years, based on the high catalytic activities of metal nanoclusters (MNCs) and the unique porous structure of metal-organic frameworks (MOFs), much work has focused on MOF-confined small MNCs for catalysis applications. However, the commonly used "ship-in-boat" approach is unfeasible for precisely controlling the size and composition of the formed MNCs and meanwhile often causes structural distortion/degradation. On the other hand, the "bottle-around-ship" method usually has the disadvantages that MOFs show uncontrollable self-nucleation outside the MNCs and the stabilizers on the surface of MNCs may greatly reduce their catalytic activities. In this work, monodispersed Pt₁₆(C₄O₄SH₅)₂₆ clusters (Pt₁₆(MSA)₂₆) were first prepared and used as a precursor for the synthesis of Pt(MSA)@ZIF-67 via the typical Co-carboxylate type of linkage at the interface under ambient atmosphere. After encapsulating the Pt clusters in ZIF-67, the protecting ligands were removed under 300 °C to get surface-clean Pt₁₆ clusters confined in ZIF-67 (Pt@ZIF-67). The obtained Pt@ZIF-67 exhibited high catalytic activity for the hydrolysis of ammonia borane that was superior to that of most of the reported noble-metal catalysts. Meanwhile, by annealing the Pt(MSA)@ZIF-67 at 800 °C to form highly conductive graphitic carbon-coated Pt NCs and Co nanoparticles (NPs) (Pt/Co@NC), the obtained composite showed high catalytic activity for the oxygen reduction reaction (ORR). The formed Pt/Co@NC showed 9.6 times higher ORR mass activity (at 0.8 V) than Pt/C. This work provides a strategy to fabricate highly dispersed and stable metal clusters confined in the porous matrix for catalysis and shows that highly porous MOFs have promising catalysis applications by combining them with other active components.

Molecular Cage Promoted Aerobic Oxidation or Photo-Induced Rearrangement of Spiroepoxy Naphthalenone

Herein, we report a Pd4L2-type molecular cage (1) and catalyzed reactions of spiroepoxy naphthalenone (2) in water, where selective formation of 2-(hydroxymethyl)naphthalene-1,4-dione (3) via aerobic oxidation, or 1-hydroxy-2-naphthaldehyde (4) via photo-induced rearrangement under N2 have been accomplished. Encapsulation of four molecules of guest 2 within cage 1, i.e., (2)4⊂1, has been confirmed by NMR, and a final host-guest complex of 3⊂1 has also been determined by single crystal X-Ray diffraction study. While the photo-induced ring-opening isomerization from 2 to 4 are known, appearance of charge-transfer absorption on the host-guest complex of (2)4⊂1 allows low-power blue LEDs irradiation to promote this process.

Thiacalix[4]arene-supported molecular clusters for catalytic applications

Thiacalixarenes are intriguing ligands that have attracted sustained interest because of their changeable conformations and excellent coordination ability. Thiacalix[4]arene analogues, which can bind metal ions to form modular second building units, are capable of constructing molecular-based functional materials with defined structures and various applications via directional coordination assembly. Due to rich metal-sulfur bonds, thiacalix[4]arene-based molecular clusters also exhibit diverse properties compared to other clusters. In particular, the combination of thiacalixarenes with currently popular molecular architectures, such as high-nuclearity clusters and coordination cages, has shown special catalytic performances. In this perspective, the latest advances in catalytic applications of thiacalix[4]arene-based molecular clusters, including molecular clusters themselves as catalysts and coordination cages serving as reaction vessels encapsulating metal nano-components for catalysis, are highlighted.

Assembly of {Co14} nanoclusters from adenine-modified Co4-thiacalix[4]arene units

An adenine-modified Co₄-thiacalix[4]arene unit can serve as a second building unit for fabrication of three Co₁₄ clusters with different structures.

Accelerating Crystallization of Open Organic Materials by Poly(ionic liquid)s

The capability to significantly shorten the synthetic period of a broad spectrum of open organic materials presents an enticing prospect for materials processing and applications. Herein we discovered 1,2,4‐triazolium poly(ionic liquid)s (PILs) could serve as a universal additive to accelerate by at least one order of magnitude the growth rate of representative imine‐linked crystalline open organics, including organic cages, covalent organic frameworks (COFs), and macrocycles. This phenomenon results from the active C5‐protons in poly(1,2,4‐triazolium)s that catalyze the formation of imine bonds, and the simultaneous salting‐out effect (induced precipitation by decreasing solubility) that PILs exert on these crystallizing species.

Nanopore-Supported Metal Nanocatalysts for Efficient Hydrogen Generation from Liquid-Phase Chemical Hydrogen Storage Materials

Hydrogen has emerged as an environmentally attractive fuel and a promising energy carrier for future applications to meet the ever-increasing energy challenges. The safe and efficient storage and release of hydrogen remain a bottleneck for realizing the upcoming hydrogen economy. Hydrogen storage based on liquid-phase chemical hydrogen storage materials is one of the most promising hydrogen storage techniques, which offers considerable potential for large-scale practical applications for its excellent safety, great convenience, and high efficiency. Recently, nanopore-supported metal nanocatalysts have stood out remarkably in boosting the field of liquid-phase chemical hydrogen storage. Herein, the latest research progress in catalytic hydrogen production is summarized, from liquid-phase chemical hydrogen storage materials, such as formic acid, ammonia borane, hydrous hydrazine, and sodium borohydride, by using metal nanocatalysts confined within diverse nanoporous materials, such as metal-organic frameworks, porous carbons, zeolites, mesoporous silica, and porous organic polymers. The state-of-the-art synthetic strategies and advanced characterizations for these nanocatalysts, as well as their catalytic performances in hydrogen generation, are presented. The limitation of each hydrogen storage system and future challenges and opportunities on this subject are also discussed. References in related fields are provided, and more developments and applications to achieve hydrogen energy will be inspired.

Ultrastable and Highly Catalytically Active N-Heterocyclic-Carbene-Stabilized Gold Nanoparticles in Confined Spaces

Controlling the size and surface functionalization of nanoparticles (NPs) can lead to improved properties and applicability. Herein, we demonstrate the efficiency of the metal-carbene template approach (MCTA) to synthesize highly robust and soluble three-dimensional polyimidazolium cages (PICs) of different sizes, each bearing numerous imidazolium groups, and use these as templates to synthesize and stabilize catalytically active, cavity-hosted, dispersed poly-N-heterocyclic carbene (NHC)-anchored gold NPs. Owing to the stabilization of the NHC ligands and the effective confinement of the cage cavities, the as-prepared poly-NHC-shell-encapsulated AuNPs displayed promising stability towards heat, pH, and chemical regents. Most notably, all the Au@PCCs (PCC=polycarbene cage) exhibited excellent catalytic activities in various chemical reactions, together with high stability and durability.

The function of metal-organic frameworks in the application of MOF-based composites

In the last two decades, metal-organic frameworks (MOFs), as a class of porous crystalline materials formed by organic linkers coordinated-metal ions, have attracted increasing attention due to their unique structures and wide applications. Compared to single components, various well-designed MOF-based composites combining MOFs with other functional materials, such as nanoparticles, quantum dots, natural enzymes and polymers with remarkably enhanced or novel properties have recently been reported. To efficiently and directionally synthesize high-performance MOF-based composites for specific applications, it is vital to understand the structural-functional relationships and role of MOFs. In this review, preparation methods of MOF-based composites are first summarized and then the relationship between the structure and performance is determined. The functions of MOFs in practical use are classified and discussed through various examples, which may help chemists to understand the structural-functional relationship in MOF-based composites from a new perspective.

Noble-metal-free nanocatalysts for hydrogen generation from boron- and nitrogen-based hydrides

We focus on the recent advances in non-noble metal catalyst design, synthesis and applications in dehydrogenation of chemical hydrides (e.g. NaBH₄, NH₃BH₃, NH₃, N₂H₄, N₂H₄BH₃) due to their high hydrogen contents and CO-free H₂ production.

Boosting Enantioselectivity of Chiral Organocatalysts with Ultrathin Two-Dimensional Metal-Organic Framework Nanosheets

The development of methodologies for inducing and tailoring enantioselectivities of catalysts is an important issue in asymmetric catalysis. In this work, we demonstrate for the first time that chiral molecular catalysts can be boosted from completely nonselective to highly enantioselective when installed in nanostructured metal-organic frameworks (MOFs). Exfoliation of layered crystals is one of the most direct synthetic routes to unltrathin nanosheets, but its use in MOFs is limited by the availability of layered MOFs. We illustrate that layered MOFs can be designed using ligand-capped metal clusters and angular organic linkers. This leads to the synthesis of two three-dimensional (3D) layered porous MOFs from Zn₄-p-tert-butylsulfonyl calix[4]arene and chiral angular 1,1'-binaphthol/-biphenol dicarboxylic acids, which can be ultrasonic exfoliated into one- and two-layer nanosheets. The obtained MOF materials are efficient catalysts for asymmetric cascade condensation and cyclization of 2-aminobenzamide and aldehydes to produce 2,3-dihyroquinazolinones. While both binaphthol and biphenol display no enantioselectivity, restriction of their freedom in the MOFs leads to 56-90% and 46-72% ee, respectively, which are increased to 72-94% and 64-82% ee after exposure to external surfaces of the flexible nanosheets. Moreover, the MOF crystals and nanosheets exhibit highly sensitive fluorescent enhancement in the presence of chiral amino alcohols with enantioselectivity factors being, respectively, increased up to 1.4 and 2.3 times of the values of the diols, allowing them to be utilized in chiral sensing. Therefore, the observed enantioselectivities increase in the order organocatalyst < MOF crystals < MOF nanosheets in both catalysis and sensing. This work not only provides a strategy to make 3D layered MOFs and their untrathin nanosheets but also paves the way to utilize nanostructured MOFs to manipulate enantioselectivities of molecular catalysts.

Thiacalixarene-Supported Irregular Co26 and Ni28 High-Nuclearity Clusters with Pyridyl-Diphosphonates: Strategies to Create Active Metal Sites and Fabricate Multicomponent Materials

Two new irregularity high-nuclearity clusters [Co₂₆(TC4A)₆(HL)₄Cl₄(HCOO)₄(CH₃O)₂(OH)₂(DMF)₁₀(H₂O)₅] (+ solvent) (Co₂₆) and [Ni₂₈(TC4A)₆(HL)₆(PO₄)₂(μ₃-O)₂Cl₂(CH₃OH)₁₄(H₂O)₂(DMF)₈][(CH₃NH₂CH₃)₄] (+ solvent) (Ni₂₈) have been solvothermally synthesized by p- tert-butylthiacalix[4]arene (H₄TC4A), transition metals (CoCl₂·6H₂O/NiCl₂·6H₂O), and 1-hydroxy-2-(3-pyridinyl)ethylidene-1,1-diphosphonic acid (H₅L). The clusters were structurally characterized by single crystal X-ray diffraction, PXRD, TGA, and FT-IR spectrum and Raman spectrum. Co₂₆ features a rodlike Co₂₆ core constructed by six Co₄-TC4A secondary building units (SBUs) and four HL^4- with two extra cobalt ions. Ni₂₈ cluster represents a flowerlike Ni₂₈ core built from six Ni₄-TC4A SBUs, six HL^4-, and four additional nickel ions. The multidentate risedronic acid displaying various new coordination mode bonds with SBUs to assemble two nanoclusters that enable high density possible coordinatively unsaturated metal sites (PCUMSs). Co₂₆ and Ni₂₈ clusters can be directly dispersed on carbon paper (CP) and showed extraordinary oxygen evolution reaction (OER) activity due to the larger exposed liable coordination active metal sites. The thermodecomposition of both nanoclusters at different temperatures afforded serial multicomponent complexes.

Metal-Assembled, Resorcin[4]arene-Based Molecular Trimer for Efficient Removal of Toxic Dichromate Pollutants and Knoevenagel Condensation Reaction

Self-assembly of resorcin[4]arene-based coordination cages involving more than two resorcin[4]arenes poses significant challenges for the requirements of suitable functionalized resorcin[4]arene ligands and metals. Here, we report an unusual example of a metal-coordinated, resorcin[4]arene-based molecular trimer (1-NO₃), composed of three resorcin[4]arenes and three Cd(II) cations. In particular, 1-NO₃ features efficient and selective removal of environmentally toxic dichromate (Cr₂O₇^2-) anions. Moreover, the Knoevenagel condensation reaction was also explored by using 1-NO₃ as an efficient heterogeneous catalyst.

Bimolecular proximity of a ruthenium complex and methylene blue within an anionic porous coordination cage for enhancing photocatalytic activity

The charge repulsion between a catalyst and substrate will significantly reduce the contact occurring between them, resulting in low reactivity. Herein, we report an anionic porous coordination cage that is capable of encapsulating both a cationic catalyst and cationic substrate in its cavity at the same time. After encapsulating the [Ru(bpy)₃]²⁺Cl₂ (bpy = bipyridine) catalyst, the cage/catalyst composite serves as an active heterogeneous catalyst for the photo-degradation of methylene blue (MB). The highly negatively charged cavity of PCC-2 allows for the sequential encapsulation of the cationic methylene blue substrate and the Ru catalyst, which in turn significantly shortens the distance between them, yielding an increased possibility of MB degradation. Moreover, the encapsulated Ru catalyst dramatically outperformed its homogeneous counterpart in terms of overall degradation performance and recyclability.

Calix[4]resorcinarene-based [Co16] coordination cages mediated by isomorphous auxiliary ligands for enhanced proton conduction

Two remarkable calix[4]resorcinarene-based [Co₁₆] coordination cages were assembled by a design approach, where the proton conductivity was enhanced drastically by carefully mediating the auxiliary ligands.

Catalytic reactions within the cavity of coordination cages

Natural enzymes catalyze reactions in their substrate-binding cavities, exhibiting high specificity and efficiency. In an effort to mimic the structure and functionality of enzymes, discrete coordination cages were designed and synthesized. These self-assembled systems have a variety of confined cavities, which have been applied to accelerate conventional reactions, perform substrate-specific reactions, and manipulate regio- and enantio-selectivity. Many coordination cages or cage-catalyst composites have achieved unprecedented results, outperforming their counterparts in different catalytic reactions. This tutorial review summarizes recent developments of coordination cages across three key approaches to coordination cage catalysis: (1) cavity promoted reactions, (2) embedding of active sites in the structure of the cage, and (3) encapsulation of catalysts within the cage. Special emphasis of the review involves (1) introduction of the structure and property of the coordination cage, (2) discussion of the catalytic pathway mediated by the cage, (3) elucidation of the structure-property relationship between the cage and the designated reaction. This work will summarize the recent progress in supramolecular catalysis and attract more researchers to pursue cavity-promoted reactions using discrete coordination cages.

Superfine CoNi alloy embedded in Al2O3 nanosheets for efficient tandem catalytic reduction of nitroaromatic compounds by ammonia borane

Tunable Co_xNi_1−x/Al₂O₃ nanocatalysts have been prepared and used for the efficient tandem catalytic dehydrogenation of ammonia borane and hydrogenation of nitroaromatics.