Co-assembly of Polyoxometalates and Zwitterionic Amphiphiles into Supramolecular Hydrogels: From Crystalline Fibrillar to Amorphous Micellar Networks

Supramolecular self-assembly of robust, ultra-stable, and high-temperature-resistant viscoelastic worm-like micelles

HYPOTHESIS

Worm-like micelles are susceptible to heating owing to the fast dynamic exchange of molecules between micelles. Inhibition of such exchange could afford robust worm-like micelles, which is expected to largely improve rheology properties at high temperatures.

EXPERIMENTS

A cationic surfactant docosyl(trimethyl)azanium chloride (DCTAC) and a strongly hydrophobic organic counterion 3-hydroxy naphthalene-2-carboxylate (SHNC) were used for the worm-like micelles fabrication. The microstructure was characterized using cryogenic transmission electron microscopy and small-angle neutron scattering, and the interactions between DCTAC and SHNC were characterized using nuclear magnetic resonance spectroscopy. Rheometer was employed to measure the rheological properties of the solution.

FINDINGS

SHNC/DCTAC at the molar ration of 1:2 forms ultra-stable worm-like micelles, whose viscosity remain stable at temperature up to 130 °C. SHNC is found to strongly adsorbs on DCTAC micelle with the orientation on the surface of micelle, keeping the naphthalene backbone entire penetration into the palisade layer while both carboxylic and hydroxyl groups protrude out of the micelle. With temperature increasing, this adsorption further strengthens, resulting in the growth contour length and accompanying the enhancement of rheological properties. One SHNC molecule and two DCTAC molecules are speculated to form a stable complex via multiple interactions including hydrophobic, cationic-π, and π-π interactions, which decreases the dynamic exchange of them between micelles. These findings are helpful to understand surfactant aggregates stability and assist the development of novel stable supramolecular nanostructures. Additionally, the excellent thermal stability of this worm-like micellar fluid makes it a potential high-temperature resistant clean fracturing fluid for deep oil reservoirs.

Ecofriendly Viscoelastic Solutions Formed from a Recyclable Rosin-Based Amine Oxide Surfactant

Innovations in molecular structures formed using bioresources are efficient means to prepare surfactant aggregates with unique properties. Here, a rosin-based amine oxide surfactant (R-11-3-AO) containing large hydrophobic groups was synthesized from rosin derivatives, namely, dehydroabietic acid and long-chain amino acids. Cryo-transmission electron microscopy showed that R-11-3-AO molecules formed extremely long wormlike micelles with a cross-sectional diameter of 4-5 nm at a concentration of approximately 7 mmol·L^-1. A gel-like system was obtained at approximately 30 mmol·L^-1 due to the dense entanglement of the wormlike micelles. The solutions also exhibited unique shear thickening behavior at a shear rate of approximately 10 s^-1 even at high concentrations. The large hydrophobic group contained in R-11-3-AO is the origin of the strong van der Waals interactions between the surfactant molecules, resulting in the rapid growth of wormlike micelles. This rosin-based surfactant is the first recoverable amine oxide surfactant from solutions through the salting-out effect with high recovery rates. This work demonstrates the unique capabilities of rosin-based surfactants for forming wormlike micelles and provides opportunities for the development of surfactant recovery technologies.

Supramolecular Anchoring of Polyoxometalate Amphiphiles into Nafion Nanophases for Enhanced Proton Conduction

Advanced proton exchange membranes (PEMs) are highly desirable in emerging sustainable energy technology. However, the further improvement of commercial perfluorosulfonic acid PEMs represented by Nafion is hindered by the lack of precise modification strategy due to their chemical inertness and low compatibility. Here, we report the robust assembly of polyethylene glycol grafted polyoxometalate amphiphile (GSiW₁₁) into the ionic nanophases of Nafion, which largely enhances the comprehensive performance of Nafion. GSiW₁₁ can coassemble with Nafion through multiple supramolecular interactions and realize a stable immobilization. The incorporation of GSiW₁₁ can increase the whole proton content in the system and induce the hydrated ionic nanophase to form a wide channel for proton transport; meanwhile, GSiW₁₁ can reinforce the Nafion ionic nanophase by noncovalent cross-linking. Based on these synergistic effects, the hybrid PEMs show multiple enhancements in proton conductivity, tensile strength, and fuel cell power density, which are all superior to the pristine Nafion. This work demonstrates the intriguing advantage of molecular nanoclusters as supramolecular enhancers to develop high-performance electrolyte materials.

Dynamic Coassembly of Amphiphilic Block Copolymer and Polyoxometalates in Dual Solvent Systems: An Efficient Approach to Heteroatom-Doped Semiconductor Metal Oxides with Controllable Nanostructures

Dynamic coassembly of block copolymers (BCPs) with Keggin-type polyoxometalates (POMs) is developed to synthesize heteroatom-doped tungsten oxide with controllable nanostructures, including hollow hemispheres, nanoparticles, and nanowires. The versatile coassembly in dual n-hexane/THF solvent solution enables the fomation of poly(ethylene oxide)-b-polystyrene (PEO-b-PS)/POMs (e.g., silicotungstic acid, H₄SiW₁₂O₄₀) nanocomposites with different morphologies such as spherical vesicles, inverse spherical micelles, and inverse cylindrical micelles, which can be readily converted into diverse nanostructured metal oxides with high surface area and unique properties via in situ thermal-induced structural evolution. For example, uniform silicon-doped WO₃ (Si-WO₃) hollow hemispheres derived from coassembly of PEO-b-PS with H₄SiW₁₂O₄₀ were utilized to fabricate gas sensing devices which exhibit superior gas sensing performance toward acetone, thanks to the selective gas-solid interface catalytic reaction that induces resistance changes of the devices due to the high specific surface areas, abundant oxygen vacancies, and the Si-doping induced metastable ε-phase of WO₃. Furthermore, density functional theory (DFT) calculation reveals the mechanism about the high sensitivity and selectivity of the gas sensors. On the basis of the as-fabricated devices, an integrated gas sensor module was constructed, which is capable of real-time monitoring the environmental acetone concentration and displaying relevant sensing results on a smart phone via Bluetooth communication.

Hybrid Liquid-Crystalline Electrolytes with High-Temperature-Stable Channels for Anhydrous Proton Conduction

Modern electrochemical and electronic devices require advanced electrolytes. Liquid crystals have emerged as promising electrolyte candidates due to their good fluidity and long-range order. However, the mesophase of liquid crystals is variable upon heating, which limits their applications as high-temperature electrolytes, e.g., implementing anhydrous proton conduction above 100 °C. Here, we report a highly stable thermotropic liquid-crystalline electrolyte based on the electrostatic self-assembly of polyoxometalate (POM) clusters and zwitterionic polymer ligands. These electrolytes can form a well-ordered mesophase with sub-10 nm POM-based columnar domains, attributed to the dynamic rearrangement of polymer ligands on POM surfaces. Notably, POMs can serve as both electrostatic cross-linkers and high proton conductors, which enable the columnar domains to be high-temperature-stable channels for anhydrous proton conduction. These nanochannels can maintain constant columnar structures in a wide temperature range from 90 to 160 °C. This work demonstrates the unique role of POMs in developing high-performance liquid-crystalline electrolytes, which can provide a new route to design advanced ion transport systems for energy and electronic applications.

Lithium Ion Repulsion-Enrichment Synergism Induced by Core-Shell Ionic Complexes to Enable High-Loading Lithium Metal Batteries

A core-shell additive with anionic Keggin-type polyoxometalate (POM) cluster as core and N-containing cation of ionic liquid (IL) as shell is proposed to stabilize Li-metal batteries (LMBs). The suspended POM derived complex in ether-based electrolyte is absorbed around the protuberances of anode and triggers a lithiophobic repulsion mechanism for the homogenization of Li⁺ redistribution. The gradually released POM cores with negative charge then enrich Li⁺ and co-assemble with Li. The Li⁺ repulsion-enrichment synergism can compact Li deposition and reinforce solid electrolyte interphase. This sustained-release additive enables Li∥Li symmetric cells with a long lifetime over 500 h and 300 h at high current densities of 3 and 5 mA cm^-2 respectively. The complex additive is also compatible with high-voltage Li∥LiNi_0.8 Co_0.15 Al_0.05 O₂ (NCA) cells. Even with a NCA loading as high as ca. 20 mg cm^-2 , the additive contained Li∥NCA cell can still cycle for over 100 cycles at 2.6 mA cm^-2 .

Surfactant-in-Polymer Templating for Fabrication of Carbon Nanofibers with Controlled Interior Substructures: Designing Versatile Materials for Energy Applications

A simple, scalable, surfactant-in-polymer templating approach is demonstrated to create controlled long-range secondary substructures in a primary structure. A metal bis(2-ethylhexyl) sulfosuccinate (MAOT) as the surfactant is shown to be capable of serving as a sacrificial template and metal precursor in carbon nanofibers. The low interfacial tension and controllable dimensions of the MAOT are maintained in the solid-phase polymer, even during electrospinning and heat-treatment processes, allowing for the long-range uniform formation of substructures in the nanofibers. The MAOT content is found to be a critical parameter for tailoring the diameter of the nanofibers and their textural properties, such as size and volume of interior pores. The metal counterion species in the MAOT determine the introduction of metallic phases in the nanofiber interior. The incorporation of MAOT with Na as the counterion into the polymer phase leads to the formation of a built-in pore structure in the nanofibers. In contrast, MAOT with Fe as a counterion generates unique iron-in-pore substructures in the nanofibers (FeCNFs). The FeCNFs exhibit outstanding charge storage and water splitting performances. As a result, the MAOT-in-polymer templating approach can be extended to combinations of various metal precursors and thus create desirable functionalities for different target applications.

Self-Assembled Vesicles Formed by Positional Isomers of Sodium Dodecyl Benzene Sulfonate-Based Pseudogemini Surfactants

The construction of pseudogemini surfactants based on noncovalent interactions (such as electrostatic interaction and π-π stacking) was a powerful method to assemble well-defined aggregates in aqueous solution. The mixtures of butane-1,4-bis(methylimidazolium bromide) ([mim-C₄-mim]Br₂) and positional isomers of sodium dodecyl benzene sulfonate (SDBS-0,11 or SDBS-3,8) in a molar ratio of 1:2 were studied to characterize the effect of straight and branched alkyl chains on the aggregation behavior of pseudogemini surfactants. Spontaneous phase transition from micelles to vesicles was formed by these two kinds of complexes. Interestingly, a densely stacked onion-like structure (multilamellar vesicles) with more than one dozen layers was fabricated. The micelle and vesicle phases were characterized in detail by cryogenic transmission electron microscopy, polarized optical microscopy, dynamic light scattering, and rheological measurements. It can be clearly demonstrated that the structure of alkyl chain can significantly influence the surface adsorption, solution self-assembly, and aqueous two-phase system of pseudogemini surfactants. Our work provided a convenient technique to achieve controlled self-assembly by introducing positional isomers of surfactants.

Photoluminescent polymer hydrogels with stimuli-responsiveness constructed from Eu-containing polyoxometalate and imidazolium zwitterions

Inorganic-organic co-assembly of anionic polyoxometalates (POMs) with zwitterions provides a facile way to fabricate functional soft materials. In this paper, a translucent, photoluminescent polymer hydrogel was fabricated from Weakley-type POM Na9EuW10O36 (EuW10) and polymerizable imidazole-type zwitterion 3-(1-vinyl-3-imidazolio)propanesulfonate (VIPS) via a one-step synthesis method. Detailed characterization indicated that the polymerization of double bonds in VIPS and electrostatic interactions between EuW10 and VIPS play important roles in the formation of the hydrogels. Additionally, the introduction of non-polymerizable zwitterions 3-(1-methyl-3-imidazolio)propanesulfonate (MIPS) or 3-(1-decyl-3-imidazolio)propanesulfonate (C10IPS) can improve the mechanical and luminous performances of the hydrogels. Especially, C10IPS with a long alkyl chain would more significantly alter the coordination environment of EuW10, and consequently resulted in a more efficient energy transfer process. Further investigations revealed that the chemical environment around the Eu3+ can be highly influenced by organic solvents with stronger coordination abilities than water molecules, such as acetone. The translucency and luminescence intensity of the hydrogels can be reversibly transformed after alternately immersing in acetone or H2O for several minutes. Our results provided a useful strategy for the fabrication of luminescent hydrogels by regulating the noncovalent interactions between POMs and zwitterions.

Fabrication of novel MXene (Ti3C2)/polyacrylamide nanocomposite hydrogels with enhanced mechanical and drug release properties

A highly stretchable nanocomposite (NC) hydrogel was fabricated via in situ free radical polymerization of acrylamide. In particular, an exfoliated two-dimensional MXene (Ti₃C₂) nanosheet was utilized as a crosslinker instead of traditional organic crosslinkers. The exfoliated Ti₃C₂ nanosheets were confirmed by atomic force microscopy (AFM) and dynamic light scattering (DLS) measurements. Compared with traditional organic crosslinked N,N-methylene bisacrylamide (BIS)/polyacrylamide (PAM) hydrogels (fracture strength of 32.0 kPa and elongation of 109.6%), the synthesized Ti₃C₂/PAM NC hydrogels exhibited greatly improved mechanical properties with fracture strengths of 66.5 to 102.7 kPa, compressive strengths of 400.6 to 819.4 kPa and elongations at break of 2158.6% to 3047.5% as the Ti₃C₂ content increases from 0.0145% to 0.0436%. The enhanced mechanical performances can be attributed to the honeycomb-like fine structure with uniform pores as well as more flexible polymer chains in NC hydrogel networks. When loaded with drugs, Ti₃C₂/PAM NC hydrogels exhibited good sustained-release performance, higher drug loading amounts (97.5-127.7 mg g^-1) and higher percentage releases (62.1-81.4%), greatly superior to those of the BIS/PAM hydrogel (46.4 mg g^-1, 45.0%). Our work reveals the application of MXene materials in the fabrication of NC hydrogels with enhanced mechanical and drug release behaviors.

Interaction among Worm-like Micelles in Polyoxometalate-Based Supramolecular Hydrogel

The co-assembly of zwitterionic amphiphile and polyoxometalate is a new and promising technique to construct a hierarchical and multifunctional supramolecular hydrogel. To comprehensively investigate the assemble mechanism, zwitterionic amphiphiles with different cations, namely, 3-(1-hexadecyl-3-imidazolio) propanesulfonate (C₁₆IPS) and 3-(1-hexadecyl-2-methyl-3-imidazolio) propanesulfonate (C₁₆bIPS), were designed to complex with silicotungstic acid (HSiW). Hydrogen bonding between the oxygen atoms of HSiW and the protons on C-2 of the imidazolium rings and the steric effect significantly influence the morphology and rheological property of the hydrogel. Interestingly, cross-linked worm-like micelles in parallel, vertical, and tilted distribution were observed using cryogenic transmission electron microscopy. In addition, these aggregates were further stacked into hexagonal phases on a large scale. Hence, deep insights into the relationship among the structure of zwitterionic amphiphile, self-assembled architecture, and the mechanical property of a polyoxometalate-based hydrogel were disclosed.

Zwitterionic Surfactant Micelle-Directed Self-Assembly of Eu-Containing Polyoxometalate into Organized Nanobelts with Improved Emission and pH Responsiveness

Recently, hybrid coassembly between polyoxometalates (POMs) and cationic building blocks provides an efficient strategy to greatly optimize POMs' functionality as well as their aggregate structural diversity. Adaptive hybrid supramolecular materials with enhanced luminescence have then been obtained from lanthanide-containing POMs. In this work, a commercially available and pH-switchable zwitterionic surfactant, tetradecyldimethylamine oxide (C₁₄DMAO), was chosen to coassemble with a lanthanide-containing anionic POM [Na₉(EuW₁₀O₃₆)·32H₂O, abbreviated as EuW₁₀] in water. The much improved red-emitting luminescent nanobelts at a C₁₄DMAO/EuW₁₀ molar ratio ( R) of 20 were obtained, which exhibited longer luminescence lifetime and higher quantum yield compared with EuW₁₀ aqueous solution. After careful characterization of morphology and structure of nanobelts, an unusual axial lamellar aggregation arrangement mechanism was proposed. It was the partial protonation of C₁₄DMAO at the solution pH of about 6.5 that led to positively charged micelles, being bridged by anionic EuW₁₀ clusters to aggregate into such novel nanobelts under the synergetic effects of appropriate electrostatic, hydrogen-bonding, and hydrophobic interactions. The resulted pH-responsive luminescent nanobelts and their aggregation model should offer attractive references for preparing smart optical supramolecular materials.

Guest Controlled Pillar[5]arene and Polyoxometalate Based Two-Dimensional Nanostructures toward Reversible Iodine Capture

The two-dimensional (2D) nanostructures comprised of polyoxometalate based building blocks are of great value in nanoarchitectures, which have unique properties and widespread potential applications, but it is still challenging in mature preparation. Herein a new strategy to build Cr(III) centered Anderson type polyoxometalate 2D nanostructures based on the modulation of host-guest interaction between cationic pillar[5]arenes and sodium dodecyl sulfonate (SDS) in aqueous media was exploited in this work. Through regulating stoichiometry of SDS, the morphology of assemblies vary from nanobones to 2D nanosheets. The fine assembled structure was discovered by combined ¹H NMR, SAXS, and element analyses. The nanomaterials can be used as adsorbents for I₂ in various solutions, including n-hexane, cyclohexane, water, and chloroform, where the polyoxometalates play a key role in the effective adsorption of iodine since they can expand the interspace between pillar[5]arenes in the as-prepared nanostructure. Furthermore, such adsorbents are easily regenerated and reused as iodine can be released spontaneously from nanobones@I₂ and nanosheets@I₂ solids when being immersed in dimethyl sulfoxide.

Highly luminescent and multi-sensing aggregates co-assembled from Eu-containing polyoxometalate and an enzyme-responsive surfactant in water

Hybrid co-assembly of polyoxometalates (POMs) with cationic organic matrices offers a preferable way to greatly enhance POM functionality as well as processability. Thus, multi-stimulus responsive supramolecular materials based on lanthanide-containing POMs with improved luminescence may be fabricated from appropriate components through this convenient strategy. Herein, we reported that the co-assembly of Na₉(EuW₁₀O₃₆)·32H₂O (EuW₁₀) and a commercially available cationic surfactant, myristoylcholine chloride (Myr), in water could produce enhanced red-emitting luminescent aggregates, with their photophysical properties highly dependent on the molar ratio (R) between Myr and EuW₁₀. The R of 36 was finally selected owing to the displayed superior luminescence intensity and good aggregate stability. The Myr/EuW₁₀ hybrids induced by electrostatic and hydrophobic forces presented practically as multilamellar spheres with diameters varying from 80 to 300 nm. Compared to an aqueous solution of EuW₁₀ nanoclusters, a 12-fold increase in absolute luminescence quantum yield (∼23.3%) was observed for the hybrid spheres, which was ascribed to the efficient shielding of water molecules. An unusual aggregation arrangement mechanism and the excellent photophysical properties of these aggregates were thoroughly investigated. Both the enzyme substrate character of Myr and the sensitive coordination structure of EuW₁₀ to the surrounding environment made Myr/EuW₁₀ aggregates exhibit multi-stimulus responsiveness to enzymes, pH, and transition metal ions, thus providing potential applications in fluorescence sensing, targeted-release, and optoelectronics.

Steam-assisted assemblies of {Ni6PW9}-based inorganic–organic hybrid chains: synthesis, crystal structures and properties

Three hexa-Ni-substituted Keggin phosphotungstate chains have been obtained through the SAC method, where H₂N-bdc and unprecedented {(Ni₆PW₉)PW₁₂} is reported for the first time.