Self-assembly of amphiphilic asymmetric comb-like copolymers with responsive rigid side chains

Amphiphilic asymmetric comb-like copolymers (AACCs) exhibit distinct self-assembly behaviours due to their unique architecture. However, the synthetic difficulties of well-defined AACCs have prohibited a systematic understanding of the architecture-morphology relationship. In this work, we conducted dissipative particle dynamics simulations to investigate the self-assembly behaviours of AACCs with responsive rigid side chains in selective solvents. The effects of side chain length, number of branches, and spacers on the morphology of aggregates were investigated by mapping out morphology diagrams. Besides, the numbers and surface areas of aggregates clearly depicted the morphological transitions during the self-assembly process. Moreover, the rod-to-coil conformation transitions were simulated to explore the stimuli-responsive behaviour of the AACCs with responsive rigid side chains by adjusting the bond angle parameter of the rigid chains. The results indicated that without the support of the rigid chains, the assembly structure collapsed, leading to the tube-to-channelized micelles and one-compartment-to-multicompartment vesicle morphology transformations. The simulation results are consistent with earlier experimental results, which can provide theoretical guidance for assembly toward desired nanostructures.

Tailoring the Architecture of Molecular Bottlebrushes via Click Grafting-Onto Strategy

Molecular bottlebrush (MBB) refer to a synthetic macromolecule, in which a mass of polymeric side chains (SCs) are covalently connected to a macromolecular backbone densely, representing an important type of unimolecular nanomaterial. The chemical composition, size, shape, and surface property of MBB can be precisely tailored by varying the backbones and SCs as well as the grafting density (Gdst ). Meanwhile, the topological structure of backbones and SCs can also significantly affect the chemical and physical properties of MBBs. For the past few years, by combining the structure features of MBB, the polymers with diverse architectures using MBB as building block are synthesized, including linear, branched, and cyclic MBB etc. These promising architectural features will bring MBBs with diverse architectures and lots of applications in advanced materials. For this reason, this work is interested in giving a briefly summary of the recent progress on tailor of well-defined MBBs with diverse architectures using grafting-onto strategy combined with controlled polymerization technique.

Emergence of layered nanoscale mesh networks through intrinsic molecular confinement self-assembly

Block copolymer self-assembly is a powerful tool for two-dimensional nanofabrication; however, the extension of this self-assembly concept to complex three-dimensional network structures is limited. Here we report a simple method to experimentally generate three-dimensional layered mesh morphologies through intrinsic molecular confinement self-assembly. We designed triblock bottlebrush polymers with two Janus domains: one perpendicular and one parallel to the polymer backbone. The former enforces a lamellar superstructure that intrinsically confines the intralayer self-assembly of the latter, giving rise to a mesh-like monoclinic (54°) M¹⁵ network substructure with excellent long-range order, as well as a tetragonal (90°) T¹³¹ mesh. Numerical simulations show that the spatial constraints exerted on the polymer backbone drive the assembly of M¹⁵ and yield T¹³¹ in the strong segregation regime. This work demonstrates that intrinsic molecular confinement is a viable path to bottom-up assembly of new geometrical phases of soft matter, extending the capabilities of block copolymer nanofabrication.

Experimental and Computational Evaluation of Self-Assembled Morphologies in Diblock Janus Bottlebrush Copolymers

Diblock Janus-type "A-branch-B" bottlebrush copolymers (di-JBBCPs) consist of a backbone with alternating A and B side chains, in contrast to the side chain arrangement of conventional bottlebrush copolymers. As a result, A and B blocks of di-JBBCPs can microphase-separate perpendicular to the backbone, which is located at the interface between the two blocks. A reparametrized dissipative particle dynamics (DPD) model is used to theoretically investigate the self-assembly of di-JBBCPs and to compare with the experimental results of a range of polystyrene-branch-polydimethylsiloxane di-JBBCPs. The experimentally formed cylinder, gyroid, and lamellar morphologies showed good correspondence with the model phase diagram, and the effect of changing volume fraction and backbone length is revealed. The DPD model predicts a bulk-stable perforated lamella morphology together with two unconventional spherical phases, the Frank-Kasper A15 spheres and the hexagonally close-packed spheres, indicating the diversity of morphologies available from complex BCP molecular architectures.

Hierarchically engineered nanostructures from compositionally anisotropic molecular building blocks

The inability to synthesize hierarchical structures with independently tailored nanoscale and mesoscale features limits the discovery of next-generation multifunctional materials. Here we present a predictable molecular self-assembly strategy to craft nanostructured materials with a variety of phase-in-phase hierarchical morphologies. The compositionally anisotropic building blocks employed in the assembly process are formed by multicomponent graft block copolymers containing sequence-defined side chains. The judicious design of various structural parameters in the graft block copolymers enables broadly tunable compositions, morphologies and lattice parameters across the nanoscale and mesoscale in the assembled structures. Our strategy introduces advanced design principles for the efficient creation of complex hierarchical structures and provides a facile synthetic platform to access nanomaterials with multiple precisely integrated functionalities.

Super-soft, firm, and strong elastomers toward replication of tissue viscoelastic response

Polymeric networks are commonly used for various biomedical applications, from reconstructive surgery to wearable electronics. Some materials may be soft, firm, strong, or damping however, implementing all four properties into a single material to replicate the mechanical properties of tissue has been inaccessible. Herein, we present the A-g-B brush-like graft copolymer platform as a framework for fabrication of materials with independently tunable softness and firmness, capable of reaching a strength of ∼10 MPa on par with stress-supporting tissues such as blood vessel, muscle, and skin. These properties are maintained by architectural control, therefore diverse mechanical phenotypes are attainable for a variety of different chemistries. Utilizing this attribute, we demonstrate the capability of the A-g-B platform to enhance specific characteristics such as tackiness, damping, and moldability.

Influences of the Periodicity in Molecular Architecture on the Phase Diagrams and Microphase Transitions of the Janus Double-Brush Copolymer with a Loose Graft

The backbone of the Janus double-brush copolymer may break during long-term service, but whether this breakage affects the self-assembled phase state and microphase transitions of the material is still unknown. For the Janus double-brush copolymers with a periodicity in molecular architecture ranging from 1 to 10, the influences of the architectural periodicity on their phase diagrams and order–disorder transitions (ODT) were investigated by the self-consistent mean field theory (SCFT). In total, nine microphases with long-range order were found. By comparing the phase diagrams between copolymers of different periodicity, a decrease in periodicity or breakage along the copolymer backbone had nearly no influence on the phase diagrams unless the periodicity was too short to be smaller than 3. For copolymers with neutral backbones, a decrease in periodicity or breakage along the copolymer backbone reduced the critical segregation strengths of the whole copolymer at ODT. The equations for the critical segregation strengths at ODT, the architectural periodicity, and the volume fraction of the backbone were established for the Janus double-brush copolymers. The theoretical calculations were consistent with the previous theoretical, experimental, and simulation results.

Optimizing Chain Topology of Bottle Brush Copolymer for Promoting the Disorder-to-Order Transition

The order-disorder transitions (ODT) of core-shell bottle brush copolymer and its structural isomers were investigated by dissipative particle dynamics simulations and theoretically by random phase approximation. Introducing a chain topology parameter λ which parametrizes linking points between M diblock chains each with N monomers, the degree of incompatibility at ODT ((χN)ODT; χ being the Flory-Huggins interaction parameter between constituent monomers) was predicted as a function of chain topology parameter (λ) and the number of linked diblock chains per bottle brush copolymer (M). It was found that there exists an optimal chain topology about λ at which (χN)ODT gets a minimum while the domain spacing remains nearly unchanged. The prediction provides a theoretical guideline for designing an optimal copolymer architecture capable of forming sub-10 nm periodic structures even with non-high χ components.

Topological Design of Highly Anisotropic Aligned Hole Transporting Molecular Bottlebrushes for Solution-Processed OLEDs

Polyvinyl polymers bearing pendant hole transport functionalities have been extensively explored for solution-processed hole transport layer (HTL) technologies, yet there are only rare examples of high anisotropic packing of the HT moieties of these polymers into substrate-parallel orientations within HTL films. For small molecules, substrate-parallel alignment of HT moieties is a well-established approach to improve overall device performance. To address the longstanding challenge of extension from vapor-deposited small molecules to solution-processable polymer systems, a fundamental chemistry tactic is reported here, involving the positioning of HT side chains within macromolecular frameworks by the construction of HT polymers having bottlebrush topologies. Applying state-of-the-art polymer synthetic techniques, various functional subunits, including triphenylamine (TPA) for hole transport and adhesion to the substrate, and perfluoro alkyl-substituted benzyloxy styrene for migration to the air interface, were organized with exquisite control over the composition and placement throughout the bottlebrush topology. Upon assembling the HT bottlebrush (HTB) polymers into monolayered HTL films on various substrates through spin-casting and thermal annealing, the backbones of HTBs were vertically aligned while the grafts with pendant TPAs were extended parallel to the substrate. The overall design realized high TPA π-stacking along the out-of-plane direction of the substrate in the HTLs, which doubled the efficiency of organic light-emitting diodes compared with linear poly(vinyl triphenylamine)s.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Self-Assembly of Poly(Janus particle)s into Unimolecular and Oligomeric Spherical Micelles

Using shape-persistent Janus particles to construct poly(Janus particle)s and studying their self-assembly behaviors are of great interest, but remain largely unexplored. In this work, we reported a type of amphiphiles constructed by the ring-opening metathesis polymerization of nonspherical molecular Janus particles (APOSS-BPOSS), called poly(Janus particle)s (poly(APOSS-BPOSS)_n, n = 12, 17, 22, and 35, and M_n = 35-100 kg/mol). Unlike traditional bottlebrush polymers consisting of flexible side chains, these poly(Janus particles) consist of rigid hydrophilic and hydrophobic polyhedral oligomeric silsesquioxane (POSS) cages as side chains. Interestingly, instead of maintaining an expected extended chain conformation, they could also collapse and then self-assemble to form unconventional unimolecular or oligomeric spherical micelles in solutions with a feature size smaller than 7 nm. More importantly, unlike traditional amphiphilic polymer brushes that could form unimolecular micelles at a relatively high degree of polymerization by self-assembly, these poly(Janus particles)s could accomplish self-assembly at a quite low degree of polymerization because of their unique chemical structure and molecular topology. The formation of unimolecular and oligomeric micelles was also further confirmed by dissipative particle dynamics simulations. This study of introducing the POSS-based poly(Janus particle)s as a class of shape amphiphiles will provide a model system for generating unimolecular and oligomeric micellar nanostructures through solution self-assembly.

Branched Aggregates with Tunable Morphology via Hierarchical Self-Assembly of Azobenzene-Derived Molecular Double Brushes

Hierarchical self-assembly is one of the most effective approaches to fabricate nature-inspired materials with subtle nanostructures. We report a distinct hierarchical self-assembly process of molecular double brushes (MDBs) with each graft site carrying a poly(azobenzene-acrylate) (PAzo) chain and a poly(ethylene oxide) (PEO) chain. Asymmetric tapered worm (ATW) nanostructures with chain-end reactivity assembling from the azobenzene-derived MDBs serve as primary subunits to prepare branched supermicelles by increasing water content (C_w ) in THF/water. Various natural Antedon-shaped multiarm worm-like aggregates (MWAs) can be created via the particle-particle connection of ATWs. Intriguingly, the azobenzene moieties undergo trans-cis isomerization upon UV irradiation and further promote a morphology evolution of MWAs. Multiscale supermicelles comprised of starfish shapes with differing central body and arm morphologies (e.g., compare to the biological specimens Luidia ciliaris and Crossaster papposus) were prepared by manipulating irradiation time.

Crystallization Induced Self-Assembly: A Strategy to Achieve Ultra-Small Domain Sizes

Achieving self-assembled nanostructures with ultra-small feature sizes (e. g., below 5 nm) is an important prerequisite for the development of block copolymer lithography. In this work, the preparation and self-assembly of a series of giant molecules composed of vinyl polyhedral oligomeric silsesquioxane (VPOSS) tethered with monodispersed oligo(L-lactide) chains are presented. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) results demonstrate that ultra-small domain sizes (down to 3 nm) of phase separated lamellar morphology are achieved in bulk, driven by the strong tendency and fast kinetics for crystallization of VPOSS moieties. Moreover, upon gamma ray radiation, VPOSS cages in the lamellar structure can be crosslinked via polymerization of the vinyl groups. After pyrolysis at high temperature, ultra-thin two-dimensional nano-silica sheets can be obtained.

Self-Assembled Lamellar Films of Comb-Shaped Copolymers by Segregation between Hydrophobic Side Chains and the Main Chain with Hydrophilic Comonomers

Self-assembled lamellar films of poly(N-dodecyl acrylamide-stat-vinyl phosphonic acid) [p(DDA/VPA)] were formed via the segregation between the hydrophilic main chain and VPA and dodecyl side chains. p(DDA/VPA) copolymers were synthesized by free-radical copolymerization of DDA and VPA with VPA molar concentrations of 19% [p(DDA/VPA19)] and 64% [p(DDA/VPA64)]. Both copolymers exhibited a glass-transition temperature (T_g) and melting temperature for p(DDA/VPA19), but no crystalline or liquid-crystalline phase-transition temperatures, which suggests that both copolymers are amorphous. Thin films of the copolymers were prepared by spin coating, and the structure of the films was studied by X-ray diffraction (XRD) measurements. The as-cast films of the copolymers showed broad diffraction patterns, which suggested the formation of alkyl nanodomains similar to that observed in the pDDA homopolymers. On the other hand, the XRD patterns for both copolymer films showed a sharp Bragg diffraction in the low-q region after annealing at 60 °C. Furthermore, the p(DDA/VPA19) film showed first- and second-order Bragg diffractions with a ratio of 1:2. These XRD patterns suggest that the copolymer films form an ordered lamellar structure. We concluded that the main chain became more hydrophilic by the introduction of VPA, resulting in an increased segregation force relative to the hydrophobic dodecyl side chains, which induces the formation of lamellae. Moreover, doping a p(DDA/VPA64) film with imidazole increased the ordering and uniformity of the lamellar structures due to the increased segregation force by the formation of ion pairs in the hydrophilic comonomer. In their entirety, the results show that statistical copolymerization can be used as a new method to create self-assembled structures.

Fine-Tuning Crystallization-Induced Gelation in Amphiphilic Double-Brush Polymers

A series of amphiphilic double-brush polymers based on itaconate diesters were synthesized with the objective of tailoring the thermal and mechanical properties of hydrogels formed by them; the amphiphilic itaconate diesters carried an MPEG350 segment and an alkyl chain, whose length was varied from C12 to C18. As was reported by us earlier (Macromolecules 2017, 50, 5004), the formation of the hydrogel was due to the crystallization of alkyl segments, as confirmed by the match of the rheological gel-to-sol transition with that of differential scanning calorimetry melting transition of the gel. In an effort to fine-tune the hydrogel-melting temperature and its strength, we varied the length of the alkyl chain length while keeping the hydrophilic segment length constant at MPEG350; apart from varying the alkyl chain length, an oxyethylene spacer was incorporated to examine the effect of decoupling the alkyl side-chain crystallization from the backbone. With these modifications, the melting temperature of the hydrogel was varied from 30 to 56 °C. Likewise, the strength of the hydrogel, as reflected by its storage modulus, varied from around 220 to 970 Pa; the softer gels typically exhibited a slightly larger critical shear strain beyond which the gel transformed into a sol. The thermal and shear-induced gel-to-sol transitions were reversible; however, the modulus after the shear-induced transition did not fully recover instantly (∼80%), suggesting that the formation of the extended gel network is slow. Further fine-tuning could be achieved by copolymerization of two different amphiphilic itaconate monomers, namely, those with C16 and C18, which provided an intermediate gel-melting temperature; however, co-gelation of the two preformed homopolymer gels yielded two distinct gel-melting transitions. Thus, this class of tuneable stimuli-responsive polymeric hydrogels prepared from biobenign components, namely, itaconic acid, 1-alkanols, and MPEGs, could serve as potential candidates for biomedical applications.

Direct Access to Bowl-Like Nanostructures with Block Copolymer Anisotropic Truncated Microspheres

Bowl-like nanostructures have attracted significant scientific and technological interest due to their favorable characteristics, such as high specific surface area, interconnected porous channels, and conductivity. However, tailored synthesis of bowl-like nanostructures with well-defined and uniform morphology is still a challenge. Herein, we report a versatile microemulsion assembly approach to prepare bowl-like nanostructures of three different materials: polymer, carbon, and platinum. To this end, polystyrene-block-poly(4vinylpyridine), PS-b-P4VP, block copolymer (BCP) microparticles with truncated-sphere shape and composed of stacks of parallel lamellae were used because those anisotropic microparticles play an important role in the design of bowl-like nanostructures. To form nanolamellae-within-microparticle morphology, a designed PS-b-P4VP/chloroform/CTAB microemulsion can be facilely obtained in the aqueous medium, where the morphology can be tailored by the interplay between macro-phase separations, BCP self-assembly, and interfacial energies of three phases in the presence of cetyltrimethylammonium bromide (CTAB). Finally, protonation or combination of cross-linking and pyrolysis of those truncated microparticles enables formation of polymer or carbon bowl-like nanostructures, respectively. Upon selective adsorption of Pt precursor salt ions with the pyridyl moieties followed by chemical reduction, subsequent calcination permits the synthesis of Pt bowl-like nanostructures. The microemulsion assembly approach opens up new ways to direct and template bowl-like nanostructures.

Design guide of amphiphilic crystalline random copolymers for sub-10 nm microphase separation

Sub-10 nm lamellar structures are efficiently constructed by the pendant microphase separation of amphiphilic crystalline random copolymers with broad molecular weight distribution that are obtained from free radical copolymerization.

Defects and defect engineering in Soft Matter

Soft matter covers a wide range of materials based on linear or branched polymers, gels and rubbers, amphiphilic (macro)molecules, colloids, and self-assembled structures. These materials have applications in various industries, all highly important for our daily life, and they control all biological functions; therefore, controlling and tailoring their properties is crucial. One way to approach this target is defect engineering, which aims to control defects in the material's structure, and/or to purposely add defects into it to trigger specific functions. While this approach has been a striking success story in crystalline inorganic hard matter, both for mechanical and electronic properties, and has also been applied to organic hard materials, defect engineering is rarely used in soft matter design. In this review, we present a survey on investigations on defects and/or defect engineering in nine classes of soft matter composed of liquid crystals, colloids, linear polymers with moderate degree of branching, hyperbranched polymers and dendrimers, conjugated polymers, polymeric networks, self-assembled amphiphiles and proteins, block copolymers and supramolecular polymers. This overview proposes a promising role of this approach for tuning the properties of soft matter.

Room temperature 3D printing of super-soft and solvent-free elastomers

Super-soft elastomers derived from bottlebrush polymers show promise as advanced materials for biomimetic tissue and device applications, but current processing strategies are restricted to simple molding. Here, we introduce a design concept that enables the three-dimensional (3D) printing of super-soft and solvent-free bottlebrush elastomers at room temperature. The key advance is a class of inks comprising statistical bottlebrush polymers that self-assemble into well-ordered body-centered cubic sphere phases. These soft solids undergo sharp and reversible yielding at 20°C in response to shear with a yield stress that can be tuned by manipulating the length scale of microphase separation. The addition of a soluble photocrosslinker allows complete ultraviolet curing after extrusion to form super-soft elastomers with near-perfect recoverable elasticity well beyond the yield strain. These structure-property design rules create exciting opportunities to tailor the performance of 3D-printed elastomers in ways that are not possible with current materials and processes.

Design, Synthesis, and Self-Assembly of Janus Bottlebrush Polymers

Janus bottlebrush polymers are a class of special molecular brushes, which have two immiscible side chains on the repeating unit of the backbone. The characteristic architectures of Janus bottlebrush polymers enable unique self-assembly properties and broad applications. Recently, remarkable advances of Janus bottlebrush polymers have been achieved for polymer chemistry and material science. This review summarizes the synthetic strategies of Janus bottlebrush polymers, and highlights the self-assembly applications. Finally, the challenges and opportunities are proposed for the further development.

Self-Assembly and Photoinduced Spindle-Toroid Morphology Transition of Macromolecular Double-Brushes with Azobenzene Pendants

Asymmetric macromolecular double-brushes (MDBs) are composed of two different side chains grafted on a linear backbone, possessing distinct assembly behaviors in comparison with conventional amphiphiles, owing to the Janus architecture and combined effects of backbone and hetero double-brushes. Additionally, the introduction of unique functionalities and responsiveness into the self-assembly system of MDBs endows extra opportunities to pursue morphologic diversity and intriguing properties. Herein, we report the synthesis of Janus-like MDBs of polyacrylate-g-poly(6-(4-butyl-4'-oxyazobenzene) hexyl acrylate)/poly(ethylene oxide) (PA-g-PAzo/PEO), in which hydrophilic PEO and hydrophobic PAzo brushes were grafted using the combination of concurrent ATRP and click reaction. Due to the special Janus topology and inter/intramolecular association of pendant azobenzene groups, amphiphilic PA-g-PAzo/PEO self-assembled into multimolecular rod and spindle-like aggregates. It is interesting that a transition of spindle-toroid-spindle was observed upon the alternative irradiation between UV and visible light, which is ascribed to the trans-to-cis isomerization of azobenzene molecular brushes. To our best knowledge, this is the first time that azobenzene-containing MDBs enable the fabrication of distinctive self-assembled morphologies and photoinduced toroid formation. The controlled synthesis of MDBs with unique functionalities and subsequent development of their structure-property relationships would shed light on the design and optimization of bottlebrush-based nanomaterials.

Efficient Synthesis of Asymmetric Miktoarm Star Polymers

Asymmetric miktoarm star polymers comprising an unequal number of chemically-distinct blocks connected at a common junction produce unique material properties, yet existing synthetic strategies are beleaguered by complicated reaction schemes that are restricted in both monomer scope and yield. Here, we introduce a new synthetic approach coined "μSTAR" - Miktoarm Synthesis by Termination After Ring-opening metathesis polymerization - that circumvents these traditional synthetic limitations by constructing the block-block junction in a scalable, one-pot process involving (1) grafting-through polymerization of a macromonomer followed by (2) in-situ enyne-mediated termination to install a single mikto-arm with exceptional efficiency. This modular μSTAR platform cleanly generates AB n and A(BA') n miktoarm star polymers with unprecedented versatility in the selection of A and B chemistries as demonstrated using many common polymer building blocks: poly(siloxane), poly(acrylate), poly(methacrylate), poly(ether), poly(ester), and poly(styrene). The average number of B or BA' arms (n) is easily controlled by the molar equivalents of macromonomer relative to Grubbs catalyst in the initial ring-opening metathesis polymerization step. While these materials are characterized by dispersity in n that arises from polymerization statistics, they self-assemble into mesophases that are identical to those predicted for precise miktoarm stars as evidenced by small-angle X-ray scattering experiments and self-consistent field theory simulations. In summary, the μSTAR technique provides a significant boost in design flexibility and synthetic simplicity while retaining the salient phase behavior of precise miktoarm star materials.

Self-assembly of luminescent triblock bottlebrush copolymers in solution

Self-assembly presents bottom-up strategies for the construction of complex micelles from luminescent bottlebrush copolymers.

Precise control of grafting density in periodically grafted amphiphilic copolymers: an alternate strategy to fine-tune the lamellar spacing in the sub-10 nm regime

By exactly locating pendant PEG550 segments at varying intervals along a hydrocarbon-rich polyester backbone, the lamellar dimension has been precisely tuned.

Synthesis and visualization of molecular brush-on-brush based hierarchically branched structures

An atom transfer radical polymerization-mediated sequential “graft-from” approach was developed to synthesize molecular brush-on-brush (MBoB)-based hierarchically branched polymers with readily tunable structural parameters.

Order-to-Disorder Transitions in Lamellar Melt Self-Assembled Core-Shell Bottlebrush Polymers

We report the synthesis and melt self-assembly behaviors of densely grafted, core-shell bottlebrush (csBB) polymers derived from covalently linking narrow dispersity, symmetric composition ABA-type triblock polymers through their chain midpoints. Derived from sequential ring-opening polymerizations of ε-decalactone and rac-lactide initiated from 5-norbornene-2-exo,3-exo-dimethanol, poly(lactide-block-ε-decalactone-block-lactide) macromonomers (M_n = 9.2-17.8 kg/mol; Đ = 1.19-1.25) were enchained by living ring-opening metathesis polymerization (ROMP) into csBBs with backbone degrees of polymerization N_bb = 8-43. Temperature-dependent small-angle X-ray scattering (SAXS) studies indicate that the critical triblock arm degree of polymerization (N_arm) required for melt segregation decreases with increasing N_bb, leading to reductions in the accessible ordered lamellar microdomain (d) spacings. We derive a phenomenological relationship between the critical triblock arm segregation strength at the order-disorder transition (χN_arm)_ODT and N_bb to enable the future design of microphase separated core-shell bottlebrushes, which self-assemble at sub-10 nm length scales for nanolithography and nanotemplating applications.