The Structure of the Cobalt Oxide/Au Catalyst Interface in Electrochemical Water Splitting

Constructing CoP/Ni2P Heterostructure Confined Ru Sub-Nanoclusters for Enhanced Water Splitting in Wide pH Conditions

Developing efficient electrocatalysts for water splitting is of great significance for realizing sustainable energy conversion. In this work, Ru sub-nanoclusters anchored on cobalt-nickel bimetallic phosphides (Ru-CoP/Ni2P) are constructed by an interfacial confinement strategy. Remarkably, Ru-CoP/Ni2P with low noble metal loading (33.1 µg cm-2) shows superior activity for hydrogen evolution reaction (HER) in all pH values, whose turnover frequency (TOF) is 8.7, 15.3, and 124.7 times higher than that of Pt/C in acidic, alkaline, and neutral conditions, respectively. Meanwhile, it only requires the overpotential of 171 mV@10 mA cm-2 for oxygen evolution reaction (OER) and corresponding TOF is 20.3 times higher than that of RuO2. More importantly, the Ru-CoP/Ni2P||Ru-CoP/Ni2P displays superior mass activity of 4017 mA mgnoble metal -1 at 2.0 V in flowing alkaline water electrolyzer, which is 105.1 times higher than that of Pt/C||IrO2. In situ Raman spectroscopy demonstrates that the Ru sites in Ru-CoP/Ni2P play a key role for water splitting and follow the adsorption evolution mechanism toward OER. Further mechanism studies disclose the confined Ru atom contributes to the desorption of H2 during HER and the formation of O-O bond during OER, leading to fast reaction kinetics. This study emphasizes the importance of interface confinement for enhancing electrocatalytic activity.

Facet Dependence of the Oxygen Evolution Reaction on Co3O4, CoFe2O4, and Fe3O4 Epitaxial Film Electrocatalysts

The main obstacle for the electrocatalytic production of "green hydrogen" is finding suitable electrocatalysts which operate highly efficiently over extended periods of time. The topic of this study is the oxygen evolution reaction (OER), one of the half-reactions of water splitting. It is complex and has intricate kinetics, which impairs the reaction efficiency. Transition metal oxides have shown potential as electrocatalysts for this reaction, but much remains unknown about the atomic scale processes. We have investigated structure-composition-reactivity correlations for Co3O4, CoFe2O4, and Fe3O4 epitaxial thin-film electrocatalysts exposing either the (001) or (111) surface facets. We found that for Co3O4, the (001) facet is more reactive, while for the other oxides, the (111) facet is more active. A Tafel-like evaluation reveals systematically smaller "Tafel" slopes for the (001) facets. Furthermore, the slopes are smaller for the iron-containing films. Additionally, we found that the oxyhydroxide skin layer which forms under OER reaction conditions is thicker on the cobalt oxides than on the other oxides, which we attribute to either a different density of surface defects or to iron hindering the growth of the skin layers. All studied skin layers were thinner than 1 nm.

Facile synthesis of FeNi alloy-supported N-doped Mo2C hollow nanospheres for the oxygen evolution reaction

The rapid depletion of fossil fuels results in significant environmental pollution. Consequently, researching environmentally friendly and cost-effective electrocatalysts with exceptional oxygen evolution reaction (OER) capabilities holds immense importance in enhancing the efficient utilization of resources. In this paper, a straightforward and cost-effective method was employed to produce Fe-Ni alloy-supported N-doped carbon hollow nanospheres (FeNi/Mo2C/NC) using self-assembled molybdenum dopamine spheres (Mo-PDA-HS) as a substrate. The inclusion of iron and nickel addressed the issue of aggregation and collapse in Mo-PDA-HS nanostructures at high temperatures, while adjusting the electronic structure of the composites to achieve efficient OER activity. The composite displayed a low overpotential (η10 mA = 304 mV) and a minimal Tafel slope (41.8 mV/dec-1). This study introduces a simple strategy for constructing structurally robust and non-aggregating Mo2C nanostructures, along with a direct method for designing cost-effective and high-performance catalysts for OER.

A model study of ceria-Pt electrocatalysts: stability, redox properties and hydrogen intercalation

The electrocatalytic properties of advanced metal-oxide catalysts are often related to a synergistic interplay between multiple active catalyst phases. The structure and chemical nature of these active phases are typically established under reaction conditions, i.e. upon interaction of the catalyst with the electrolyte. Here, we present a fundamental surface science (scanning tunneling microscopy, X-ray photoelectron spectroscopy, and low-energy electron diffraction) and electrochemical (cyclic voltammetry) study of CeO2(111) nanoislands on Pt(111) in blank alkaline electrolyte (0.1 M KOH) in a potential window between -0.05 and 0.9 VRHE. We observe a size- and preparation-dependent behavior. Large ceria nanoislands prepared at high temperatures exhibit stable redox behavior with Ce3+/Ce4+ electrooxidation/reduction limited to the surface only. In contrast, ceria nanoislands, smaller than ∼5 nm prepared at a lower temperature, undergo conversion into a fully hydrated phase with Ce3+/Ce4+ redox transitions, which are extended to the subsurface region. While the formation of adsorbed OH species on Pt depends strongly on the ceria coverage, the formation of adsorbed Hads on Pt is independent of the ceria coverage. We assign this observation to intercalation of Hads at the Pt/ceria interface. The intercalated Hads cannot participate in the hydrogen evolution reaction, resulting in the moderation of this reaction by ceria nanoparticles on Pt.

Electronic Band Engineering of Two-Dimensional Kagomé Polymers

Two-dimensional conjugated polymers (2DCPs) are an emerging class of materials that exhibit properties similar to graphene yet do not have the limitation of zero bandgap. On-surface synthesis provides exceptional control on the polymerization reaction, allowing tailoring properties by choosing suitable monomers. Heteroatom-substituted triangulene 2DCPs constitute a playing ground for such a design and are predicted to exhibit graphene-like band structures with high charge mobility and characteristic Dirac cones in conduction or valence states. However, measuring these properties experimentally is challenging and requires long-range-ordered polymers, preferably with an epitaxial relationship with the substrate. Here, we investigate the electronic properties of a mesoscale-ordered carbonyl-bridged triphenylamine 2DCP (P2TANGO) and demonstrate the presence of a Dirac cone by combining angle-resolved photoemission spectroscopy (ARPES) with density functional theory (DFT) calculations. Moreover, we measure the absolute energy position of the Dirac cone with respect to the vacuum level. We show that the bridging functionality of the triangulene (ether vs carbonyl) does not significantly perturb the band structure but strongly affects the positioning of the bands with respect to the Au(111) states and allows control of the ionization energy of the polymer. Our results provide proof of the controllable electronic properties of 2DCPs and bring us closer to their use in practical applications.

Phase Engineering and Synchrotron-Based Study on Two-Dimensional Energy Nanomaterials

In recent years, there has been significant interest in the development of two-dimensional (2D) nanomaterials with unique physicochemical properties for various energy applications. These properties are often derived from the phase structures established through a range of physical and chemical design strategies. A concrete analysis of the phase structures and real reaction mechanisms of 2D energy nanomaterials requires advanced characterization methods that offer valuable information as much as possible. Here, we present a comprehensive review on the phase engineering of typical 2D nanomaterials with the focus of synchrotron radiation characterizations. In particular, the intrinsic defects, atomic doping, intercalation, and heterogeneous interfaces on 2D nanomaterials are introduced, together with their applications in energy-related fields. Among them, synchrotron-based multiple spectroscopic techniques are emphasized to reveal their intrinsic phases and structures. More importantly, various in situ methods are employed to provide deep insights into their structural evolutions under working conditions or reaction processes of 2D energy nanomaterials. Finally, conclusions and research perspectives on the future outlook for the further development of 2D energy nanomaterials and synchrotron radiation light sources and integrated techniques are discussed.

Comparative study of Co3O4(111), CoFe2O4(111), and Fe3O4(111) thin film electrocatalysts for the oxygen evolution reaction

Water electrolysis to produce 'green H2' with renewable energy is a promising option for the upcoming green economy. However, the slow and complex oxygen evolution reaction at the anode limits the efficiency. Co3O4 with added iron is a capable catalyst for this reaction, but the role of iron is presently unclear. To investigate this topic, we compare epitaxial Co3O4(111), CoFe2O4(111), and Fe3O4(111) thin film model electrocatalysts, combining quasi in-situ preparation and characterization in ultra-high vacuum with electrochemistry experiments. The well-defined composition and structure of the thin epitaxial films permits the obtention of quantitatively comparable results. CoFe2O4(111) is found to be up to about four times more active than Co3O4(111) and about nine times more than Fe3O4(111), with the activity depending acutely on the Co/Fe concentration ratio. Under reaction conditions, all three oxides are covered by oxyhydroxide. For CoFe2O4(111), the oxyhydroxide's Fe/Co concentration ratio is stabilized by partial iron dissolution.

Interfacial Evolution on Co-based Oxygen Evolution Reaction Electrocatalysts Probed by Using In Situ Surface-Enhanced Raman Spectroscopy

Disclosing the roles of reactive sites at catalytic interfaces is of paramount importance for understanding the reaction mechanism. However, due to the difficulties in the detection of reaction intermediates in the complex heterophase reaction system, disentangling the highly convolved roles of different surface atoms remains challenging. Herein, we used CoO_x as a model catalyst to study the synergy of Co_Td²⁺ and Co_Oh³⁺ active sites in the electrocatalytic oxygen evolution reaction (OER). The formation and evolution of reaction intermediates on the catalyst surface during the OER process were investigated by in situ surface-enhanced Raman spectroscopy (SERS). According to the SERS results in ion-substitution experiments, Co_Oh³⁺ is the catalytic site for the conversion of OH^- to O-O^- intermediate species (1140-1180 cm^-1). CoOOH (503 cm^-1) and CoO₂ (560 cm^-1) active centers generated during the OER, at the original Co_Td²⁺ sites of CoO_x, eventually serve as the O₂ release sites (conversion of O-O^- intermediate to O₂). The mechanism was further confirmed on Co²⁺-Co³⁺ layered double hydroxides (LDHs), where an optimal ratio of 1:1.2 (Co²⁺/Co³⁺) is required to balance O-O^- generation and O₂ release. This work highlights the synergistic role of metal atoms at different valence statuses in water oxidation and sheds light on surface component engineering for the rational design of high-performance heterogeneous catalysts.

Recent Advances in In Situ/Operando Surface/Interface Characterization Techniques for the Study of Artificial Photosynthesis

(Photo-)electrocatalytic artificial photosynthesis driven by electrical and/or solar energy that converts water (H2O) and carbon dioxide (CO2) into hydrogen (H2), carbohydrates and oxygen (O2), has proven to be a promising and effective route for producing clean alternatives to fossil fuels, as well as for storing intermittent renewable energy, and thus to solve the energy crisis and climate change issues that we are facing today. Basic (photo-)electrocatalysis consists of three main processes: (1) light absorption, (2) the separation and transport of photogenerated charge carriers, and (3) the transfer of photogenerated charge carriers at the interfaces. With further research, scientists have found that these three steps are significantly affected by surface and interface properties (e.g., defect, dangling bonds, adsorption/desorption, surface recombination, electric double layer (EDL), surface dipole). Therefore, the catalytic performance, which to a great extent is determined by the physicochemical properties of surfaces and interfaces between catalyst and reactant, can be changed dramatically under working conditions. Common approaches for investigating these phenomena include X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), scanning probe microscopy (SPM), wide angle X-ray diffraction (WAXRD), auger electron spectroscopy (AES), transmission electron microscope (TEM), etc. Generally, these techniques can only be applied under ex situ conditions and cannot fully recover the changes of catalysts in real chemical reactions. How to identify and track alterations of the catalysts, and thus provide further insight into the complex mechanisms behind them, has become a major research topic in this field. The application of in situ/operando characterization techniques enables real-time monitoring and analysis of dynamic changes. Therefore, researchers can obtain physical and/or chemical information during the reaction (e.g., morphology, chemical bonding, valence state, photocurrent distribution, surface potential variation, surface reconstruction), or even by the combination of these techniques as a suite (e.g., atomic force microscopy-based infrared spectroscopy (AFM-IR), or near-ambient-pressure STM/XPS combined system (NAP STM-XPS)) to correlate the various properties simultaneously, so as to further reveal the reaction mechanisms. In this review, we briefly describe the working principles of in situ/operando surface/interface characterization technologies (i.e., SPM and X-ray spectroscopy) and discuss the recent progress in monitoring relevant surface/interface changes during water splitting and CO2 reduction reactions (CO2RR). We hope that this review will provide our readers with some ideas and guidance about how these in situ/operando characterization techniques can help us investigate the changes in catalyst surfaces/interfaces, and further promote the development of (photo-)electrocatalytic surface and interface engineering.

Transition Metal Non-Oxides as Electrocatalysts: Advantages and Challenges

The identification of hydrogen as green fuel in the near future has stirred global realization toward a sustainable outlook and thus boosted extensive research in the field of water electrolysis focusing on the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). A huge class of compounds consisting of transition metal-based nitrides, carbides, chalcogenides, phosphides, and borides, which can be collectively termed transition metal non-oxides (TMNOs), has emerged recently as an efficient class of electrocatalysts in terms of performance and longevity when compared to transition metal oxides (TMOs). Moreover, the superiority of TMNOs over TMOs to effectively catalyze not only OERs but also HERs and ORRs renders bifunctionality and even trifunctionality in some cases and therefore can replace conventional noble metal electrocatalysts. In this review, the crystal structure and phases of different classes of nanostructured TMNOs are extensively discussed, focusing on recent advances in design strategies by various regulatory synthetic routes, and hence diversified properties of TMNOs are identified to serve as next-generation bi/trifunctional electrocatalysts. The challenges and future perspectives of materials in the field of energy conversion and storage aiding toward a better hydrogen economy are also discussed in this review.

Phase Segregation in Cobalt Iron Oxide Nanowires toward Enhanced Oxygen Evolution Reaction Activity

The impact of reduction post-treatment and phase segregation of cobalt iron oxide nanowires on their electrochemical oxygen evolution reaction (OER) activity is investigated. A series of cobalt iron oxide spinel nanowires are prepared via the nanocasting route using ordered mesoporous silica as a hard template. The replicated oxides are selectively reduced through a mild reduction that results in phase transformation as well as the formation of grain boundaries. The detailed structural analyses, including the ⁵⁷Fe isotope-enriched Mössbauer study, validated the formation of iron oxide clusters supported by ordered mesoporous CoO nanowires after the reduction process. This affects the OER activity significantly, whereby the overpotential at 10 mA/cm² decreases from 378 to 339 mV and the current density at 1.7 V vs RHE increases by twofold from 150 to 315 mA/cm². In situ Raman microscopy revealed that the surfaces of reduced CoO were oxidized to cobalt with a higher oxidation state upon solvation in the KOH electrolyte. The implementation of external potential bias led to the formation of an oxyhydroxide intermediate and a disordered-spinel phase. The interactions of iron clusters with cobalt oxide at the phase boundaries were found to be beneficial to enhance the charge transfer of the cobalt oxide and boost the overall OER activity by reaching a Faradaic efficiency of up to 96%. All in all, the post-reduction and phase segregation of cobalt iron oxide play an important role as a precatalyst for the OER.

Ultrahigh oxygen evolution reaction activity in Au doped co-based nanosheets

Oxygen evolution reaction (OER) has attracted enormous interest as a key process for water electrolysis over the past years. The advance of this process relies on an effective catalyst. Herein, we employed single-atom Au doped Co-based nanosheets (NSs) to theoretically and experimentally evaluate the OER activity and also the interaction between Co and Au. We reveal that Au-Co(OH)₂ NSs achieved a low overpotential of 0.26 V at 10 mA cm^-2. This extraordinary phenomenon presents an overall superior performance greater than state-of-the-art Co-based catalysts in a sequence of α-Co(OH)₂ < Co₃O₄ < CoOOH < Au-Co(OH)₂. With ab initio calculations and analysis in the specific Au-Co(OH)₂ configuration, we reveal that OER on highly active Au-Co(OH)₂ originates from lattice oxygen, which is different from the conventional adsorbate evolution scheme. Explicitly, the configuration of Au-Co(OH)₂ gives rise to oxygen non-bonding (O_NB) states and oxygen holes, allowing direct O-O bond formation by a couple of oxidized oxygen with oxygen holes, offering a high OER activity. This study provides new insights for elucidating the origins of activity and synthesizing efficient OER electrocatalysts.

Sodium Cobalticarborane: A Promising Precatalyst for Oxygen Evolution Reaction

Water splitting is a helpful way of converting renewable electricity into fuel. The oxygen evolution reaction (OER) is a slow reaction that provides low-cost electrons for water reduction reactions. Thus, finding an efficient, low-cost, stable, and environmentally friendly OER catalyst is critical for water splitting. Here, sodium cobalticarborane (1) is introduced as a promising precatalyst for forming an OER cobalt-based catalyst. The cobalt-based catalyst was characterized by several methods and is suggested to be Co(III) (hydr)oxide. Using fluorine-doped tin oxide, glassy carbon, platinum, and gold electrodes, the OER activity of the cobalt-based precatalyst was investigated. The overpotential for the onset of OER in the presence of 1 is 315 mV using fluorine-doped tin oxide electrodes. The onsets of OERs in the presence of 1 using gold, platinum, and glassy carbon electrodes in KOH solutions (1.0 M) turned out to be 275, 284, and 330 mV, respectively. The nanoparticles on the gold electrodes exhibit significant OER activity with a Tafel slope of 63.8 mV/decade and an overpotential at 541 mV for 50 mA/cm². In the case of the glassy carbon electrodes, a Tafel slope of 109.9 mV/decade and an overpotential of 548 mV for 10 mA/cm² is recorded for the catalyst. This paper outlines an interesting approach to synthesize cobalt oxide for OER through a slow decomposition of a precatalyst.

Single Co3O4 Nanocubes Electrocatalyzing the Oxygen Evolution Reaction: Nano-Impact Insights into Intrinsic Activity and Support Effects

Single-entity electrochemistry allows for assessing electrocatalytic activities of individual material entities such as nanoparticles (NPs). Thus, it becomes possible to consider intrinsic electrochemical properties of nanocatalysts when researching how activity relates to physical and structural material properties. Conversely, conventional electrochemical techniques provide a normalized sum current referring to a huge ensemble of NPs constituting, along with additives (e.g., binders), a complete catalyst-coated electrode. Accordingly, recording electrocatalytic responses of single NPs avoids interferences of ensemble effects and reduces the complexity of electrocatalytic processes, thus enabling detailed description and modelling. Herein, we present insights into the oxygen evolution catalysis at individual cubic Co₃O₄ NPs impacting microelectrodes of different support materials. Simulating diffusion at supported nanocubes, measured step current signals can be analyzed, providing edge lengths, corresponding size distributions, and interference-free turnover frequencies. The provided nano-impact investigation of (electro-)catalyst-support effects contradicts assumptions on a low number of highly active sites.

Support Effects in Electrocatalysis and Their Synchrotron Radiation-Based Characterizations

Electrocatalysis is recognized as a significant process for energy conversion. In fact, numerous factors, including the variable electronic structure of electrocatalysts, rich intermediates, and mutable active phases, have important but complex influences on the catalytic process. In addition, the support of electrocatalysts is considered as one of key factors that correlate to the final catalytic performance. In this Perspective, some recent advances regarding the support effects in electrocatalysis are briefly summarized. Synchrotron radiation-based characterizations are introduced to reveal the support-induced modulation in electrocatalysts. Recent in situ/operando studies are emphasized for better understanding of the real interaction between catalysts and support, together with visualizing the dynamic catalytic process. Some perspectives are proposed that may accelerate more attention being given to the support's optimization for future practical applications.

The Effect of Fe Dopant Location in Co(Fe)OOHx Nanoparticles for the Oxygen Evolution Reaction

The addition of iron (Fe) can in certain cases have a strong positive effect on the activity of cobalt and nickel oxide nanoparticles in the electrocatalytic oxygen evolution reaction (OER). The reported optimal Fe dopant concentrations are, however, inconsistent, and the origin of the increased activity due to Fe dopants in mixed oxides has not been identified so far. Here, we combine density functional theory calculations, scanning tunneling microscopy, and OER activity measurements on atomically defined Fe-doped Co oxyhydroxide nanoparticles supported on a gold surface to establish the link between the activity and the Fe distribution and concentration within the oxyhydroxide phase. We find that addition of Fe results in distinct effects depending on its location on edge or basal plane sites of the oxyhydroxide nanoparticles, resulting in a nonlinear OER activity as a function of Fe content. Fe atom substitution itself does not lead to intrinsically more active OER sites than the best Co sites. Instead, the sensitivity to Fe promoter content is explained by the strong preference for Fe to locate on the most active edge sites of oxyhydroxide nanoparticles, which for low Fe concentrations stabilizes the particles but in higher concentrations leads to a shell structure with less active Fe on all edge positions. The optimal Fe content thereby becomes dependent on nanoparticle size. Our findings demonstrate that synthesis strategies that adjust not only the Fe concentration in mixed oxides but also its distribution within a catalyst nanoparticle can lead to enhanced OER performance.

A versatile electrochemical cell for hanging meniscus or flow cell measurement of planar model electrodes characterized with scanning tunneling microscopy and x-ray photoelectron spectroscopy

We demonstrate the development of a portable electrochemistry (EC) cell setup that can be applied to measure relevant electrochemical signals on planar samples in conjunction with pre- and post-characterization by surface science methods, such as scanning tunneling microscopy and x-ray photoelectron spectroscopy. The EC cell setup, including the transfer and EC cell compartments, possesses the advantage of a small size and can be integrated with standard ultra-high vacuum (UHV) systems or synchrotron end-stations by replacing the flange adaptor, sample housing, and transfer arm. It allows a direct transfer of the pre-characterized planar sample from the UHV environment to the EC cell to conduct in situ electrochemical measurements without exposing to ambient air. The EC cell setup can operate in both the hanging meniscus and flow cell mode. As a proof of concept, using a Au(111) single crystal electrode, we demonstrate the application of the EC cell setup in both modes and report on the post-EC structure and chemical surface composition as provided by scanning tunneling microscopy and x-ray photoelectron spectroscopy. To exemplify the advantage of an in situ EC cell, the EC cell performance is further compared to a corresponding experiment on a Au(111) sample measured by transfer at ambient conditions. The EC cell demonstrated here enables a wealth of future electrocatalysis measurements that combine surface science model catalyst approaches to facilitate the understanding of nano- and atomic-scale structures of electrocatalytic interfaces, the crucial role of catalyst stability, and the nature of low-concentration and atomically dispersed metal (single atom) dopants.

Surface oxygen Vacancies on Reduced Co3 O4 (100): Superoxide Formation and Ultra-Low-Temperature CO Oxidation

The activation of molecular oxygen is a fundamental step in almost all catalytic oxidation reactions. We have studied this topic and the role of surface vacancies for Co₃ O₄ (100) films with a synergistic combination of experimental and theoretical methods. We show that the as-prepared surface is B-layer terminated and that mild reduction produces oxygen single and double vacancies in this layer. Oxygen adsorption experiments clearly reveal different superoxide species below room temperature. The superoxide desorbs below ca. 120 K from a vacancy-free surface and is not active for CO oxidation while superoxide on a surface with oxygen vacancies is stable up to ca. 270 K and can oxidize CO already at the low temperature of 120 K. The vacancies are not refilled by oxygen from the superoxide, which makes them suitable for long-term operation. Our joint experimental/theoretical effort highlights the relevance of surface vacancies in catalytic oxidation reactions.

Constructing ultrathin FeS/FeOxH@Fe nano-sheets for highly efficient oxygen evolution reaction

Exploring earth-abundant catalysts with ultra-high activity and durability are the decisive challenges for oxygen evolution reaction. This work prepared the FeS/FeO_xH@Fe nanosheets as the efficient and stable electrocatalysts of oxygen evolution reaction (OER) through a simple one-step co-deposition method. The FeS/FeO_xH@Fe exhibited small overpotentials of 245, 376 and 482 mV at the current density of 10, 500 and 1000 mA cm^-2 without iR-compensations in 1.0 M KOH solution, respectively. Constructing amorphous structure and the interface between amorphous and crystal can obviously improve the conductivity of FeO_xH, which is beneficial to the improvement of catalytic performance. This work may provide an effective and controlled strategy to design highly active OER catalysts with an interface structure between amorphous and crystal by a well-designed co-deposition.

Principles of Water Electrolysis and Recent Progress in Cobalt-, Nickel-, and Iron-Based Oxides for the Oxygen Evolution Reaction

Water electrolysis that results in green hydrogen is the key process towards a circular economy. The supply of sustainable electricity and availability of oxygen evolution reaction (OER) electrocatalysts are the main bottlenecks of the process for large‐scale production of green hydrogen. A broad range of OER electrocatalysts have been explored to decrease the overpotential and boost the kinetics of this sluggish half‐reaction. Co‐, Ni‐, and Fe‐based catalysts have been considered to be potential candidates to replace noble metals due to their tunable 3d electron configuration and spin state, versatility in terms of crystal and electronic structures, as well as abundance in nature. This Review provides some basic principles of water electrolysis, key aspects of OER, and significant criteria for the development of the catalysts. It provides also some insights on recent advances of Co‐, Ni‐, and Fe‐based oxides and a brief perspective on green hydrogen production and the challenges of water electrolysis.

Activating Titanium Metal with H2 Plasma for the Hydrogen Evolution Reaction

Developing a high-performance nonprecious metal electrocatalyst for water splitting is a strong demand for the large-scale application of electrochemical H₂ production. In this work, we design a facile and scalable strategy to activate titanium metal for the hydrogen evolution reaction (HER) in alkaline media through incorporating hydrogen into the α-Ti crystal lattice by H₂ plasma bombardment. Benefiting from the accelerated charge transfer and enlarged electrochemical surface area after H₂ plasma treatment, the H-incorporated Ti shows remarkably enhanced HER activity with a much lower overpotential at -10 mA cm^-2 by 276 mV when compared to the pristine Ti. It is revealed that the retention of the incorporated H(D) atoms in the Ti crystal lattice during HER accounts for the durable feature of the catalyst. Density functional theory calculations demonstrate the effectiveness of hydrogen incorporation in tuning the adsorption energy of reaction species via charge redistribution. Our work offers a novel route to activate titanium or other metals by H incorporation through a controllable H₂ plasma treatment to tune the electronic structure for water splitting reactions.

Application of Scanning Tunneling Microscopy in Electrocatalysis and Electrochemistry

Abstract

Scanning tunneling microscopy (STM) has gained increasing attention in the field of electrocatalysis due to its ability to reveal electrocatalyst surface structures down to the atomic level in either ultra-high-vacuum (UHV) or harsh electrochemical conditions. The detailed knowledge of surface structures, surface electronic structures, surface active sites as well as the interaction between surface adsorbates and electrocatalysts is highly beneficial in the study of electrocatalytic mechanisms and for the rational design of electrocatalysts. Based on this, this review will discuss the application of STM in the characterization of electrocatalyst surfaces and the investigation of electrochemical interfaces between electrocatalyst surfaces and reactants. Based on different operating conditions, UHV-STM and STM in electrochemical environments (EC-STM) are discussed separately. This review will also present emerging techniques including high-speed EC-STM, scanning noise microscopy and tip-enhanced Raman spectroscopy.

Graphic Abstract

Oxygen Reduction and Evolution on Ni-modified Co3 O4 (1 1 1) Cathodes for Zn-Air Batteries: A Combined Surface Science and Electrochemical Model Study

The performance of structurally and chemically well-defined Ni-free and Ni-modified single-crystalline Co3 O4 (1 1 1) thin-film electrodes in the oxygen reduction and evolution reactions (ORR and OER) was investigated in a combined surface science and electrochemistry approach. Pure and Ni-modified Co3 O4 (1 1 1) film electrodes were prepared and characterized under ultrahigh-vacuum conditions by scanning tunneling microscopy and X-ray photoelectron spectroscopy. Both Ni decoration (by post-deposition of Ni) and Ni doping (by simultaneous vapor deposition of Ni, Co, and O2 ) induced distinct differences in the base cyclic voltammograms in 0.5 m KOH at potentials higher than 0.7 V compared with Co3 O4 (1 1 1) electrodes. Also, all oxide film electrodes showed a higher overpotential for the ORR but a lower one for the OER than polycrystalline Pt. Ni modification significantly improved the ORR current densities by increasing the electrical conductivity, whereas the OER onset of approximately 1.47 VRHE (RHE: reversible hydrogen electrode) at 0.1 mA cm-2 was almost unchanged.

Tuning the activities of cuprous oxide nanostructures via the oxide-metal interaction

Despite tremendous importance in catalysis, the design of oxide-metal interface has been hampered by the limited understanding of the nature of interfacial sites and the oxide-metal interaction (OMI). Through construction of well-defined Cu₂O/Pt, Cu₂O/Ag and Cu₂O/Au interfaces, we find that Cu₂O nanostructures (NSs) on Pt exhibit much lower thermal stability than on Ag and Au, although they show the same structure. The activities of these interfaces are compared for CO oxidation and follow the order of Cu₂O/Pt > Cu₂O/Au > Cu₂O/Ag. OMI is found to determine the activity and stability of supported Cu₂O NSs, which could be described by the formation energy of interfacial oxygen vacancy. Further, electronic interaction between Cu⁺ and metal substrates is found center to OMI, where the d band center could be used as a key descriptor. Our study provides insight for OMI and for the development of Cu-based catalysts for low temperature oxidation reactions.

The design of oxide-metal interface for heterogeneous catalysis has been hampered by the limited fundamental understanding. Here, the authors demonstrate that the activities of cuprous oxide nanostructures for CO oxidation can be tuned via the oxide-metal (Cu2O/M, M = Pt, Ag, Au) interaction.

Gold-Incorporated Cobalt Phosphide Nanoparticles on Nitrogen-Doped Carbon for Enhanced Hydrogen Evolution Electrocatalysis

Transition metal phosphides (TMPs) demonstrate great potential for hydrogen evolution reaction (HER) electrocatalysis, but their activities need further improvement. Herein we report a novel Au incorporation strategy to boost the HER catalytic performance of CoP. As a proof of concept, heterostructured Au/CoP nanoparticles dispersed on nitrogen-doped carbon with unique porosity, denoted as Au/CoP@NC-3, are synthesized by thermal treatment of Au-nanoparticle-incorporated ZIF-67 precursor. It shows excellent HER activity as well as good durability in acidic and alkaline condition, respectively, greatly outperforming its Au-free analogue, namely, CoP@NC. In-depth analysis suggests that the improved HER activity of Au/CoP@NC-3 is attributed to the presence of Au nanoparticles which enlarge the electrochemical active surface areas and adjust the electronic structure of active CoP species to enhance the water adsorption and optimize H adsorption for the accelerated HER process.

Non-precious-metal catalysts for alkaline water electrolysis: operando characterizations, theoretical calculations, and recent advances

Advances of non-precious-metal catalysts for alkaline water electrolysis are reviewed, highlighting operando techniques and theoretical calculations in their development.

Reactivity mapping of nanoscale defect chemistry under electrochemical reaction conditions

Electrocatalysts often show increased conversion at nanoscale chemical or topographic surface inhomogeneities, resulting in spatially heterogeneous reactivity. Identifying reacting species locally with nanometer precision during chemical conversion is one of the biggest quests in electrochemical surface science to advance (electro)catalysis and related fields. Here, we demonstrate that electrochemical tip-enhanced Raman spectroscopy can be used for combined topography and reactivity imaging of electro-active surface sites under reaction conditions. We map the electrochemical oxidation of Au nanodefects, a showcase energy conversion and corrosion reaction, with a chemical spatial sensitivity of about 10 nm. The results indicate the reversible, concurrent formation of spatially separated Au₂O₃ and Au₂O species at defect-terrace and protrusion sites on the defect, respectively. Active-site chemical nano-imaging under realistic working conditions is expected to be pivotal in a broad range of disciplines where quasi-atomistic reactivity understanding could enable strategic engineering of active sites to rationally tune (electro)chemical device properties.

Identifying reacting species locally with nanometer precision is a major challenge in electrochemical surface science. Using operando Raman nanoscopy, authors image the reversible, concurrent formation of nanometer-spatially separated Au₂O₃ and Au₂O species during Au nanodefect oxidation.

Bimetallic nanoparticles decorated hollow nanoporous carbon framework as nanozyme biosensor for highly sensitive electrochemical sensing of uric acid

An ultrasensitive electrochemical biosensor was developed to identify the low levels of uric acid (UA) in human serum. The gold/cobalt (Au/Co) bimetallic nanoparticles (NPs) decorated hollow nanoporous carbon framework (Au/Co@HNCF) was synthesized as a nanozyme by pyrolysis of the Au (III)-etching zeolitic imidazolate framework-67 (ZIF-67). The external Au NPs combined with internal Co NPs on the hollow carbon framework exhibited enhanced activity for UA oxidation, thereby generating superior signals. Accordingly, the Au/Co@HNCF biosensor presented ranking performances with a low detection limit of 0.023 μM (S/N = 3), an ultrahigh sensitivity of 48.4 μA μM^-1 cm^-2, and an extensive response in the linear region of 0.1-25 μM and the logarithmic region of 25-2500 μM. Owing to the ordered nanoporous framework and carbon interfacial features, the Au/Co@HNCF biosensor displayed adequate selectivity for UA sensing over a series of biomolecules. In addition, the Au/Co@HNCF biosensor was employed to quantify UA in human serum samples. The test results were basically consistent with those of a commercial apparatus, and thus demonstrated that the proposed Au/Co@HNCF biosensor was reliable for UA determination in clinical research.

Electrochemical Synthesis of Cation Vacancy-Enriched Ultrathin Bimetallic Oxyhydroxide Nanoplatelets for Enhanced Water Oxidation

Metal cation vacancies, a kind of structural defect, are viewed as a promising strategy for regulating the electronic properties to enhance the catalytic activity. However, the effective introduction of cation vacancies into electrocatalysts still remains a challenge. Herein, we present and elucidate a facile "fast reduction and in situ phase transformation" strategy at room temperature to simultaneously introduce abundant metal cation vacancies (cobalt vacancies and iron vacancies) into Co_0.5Fe_0.5OOH electrocatalysts. The incorporation of the Fe element could tailor the micrometer-sized ultrathin CoOOH platelets into nanometer-sized ultrathin Co_0.5Fe_0.5OOH platelets, and the tailoring process is accompanied with the generation of numerous cation vacancies. The defect degree of CoOOH could be effectively tuned by the incorporation of Fe, resulting in more active sites and lower energy barrier, and thereby the intrinsic catalytic activity of electrocatalysts was further enhanced. Compared to CoOOH, the optimized nanometer-sized ultrathin Co_0.5Fe_0.5OOH platelets (Co_0.5Fe_0.5OOH-NSUPs) require a smaller overpotential of 220 mV at a current density of 20 mA cm^-2, lower Tafel slope of 38.2 mV dec^-1, and better long-term durability without obvious decay for more than 200 h at a high current density of 40 mA cm^-2. The electrochemical performances are equal to or better than that of the reported first-class electrocatalysts. More importantly, this work provides new perspective for designing and fabricating efficient multimetal electrocatalysts in large scale.

Two-Dimensional Zeolitic Imidazolate Framework-L-Derived Iron-Cobalt Oxide Nanoparticle-Composed Nanosheet Array for Water Oxidation

Rational design of various functional nanomaterials using MOFs as a template provides an effective strategy to synthesize electrocatalysts for water splitting. In this work, we reported that an iron-cobalt oxide with 2D well-aligned nanoflakes assembling on carbon cloth (Fe-Co₃O₄ NS/CC), fabricated by an anion-exchange reaction followed by an annealing process, could serve as a high-performance oxygen-evolving catalyst. Specifically, the zeolitic imidazolate framework-L-Co nanosheet array (ZIF-L-Co NS/CC) was synthesized through a facile ambient liquid-phase deposition reaction, and then reacted with [Fe(CN)₆]^3- ions as precursors during the anion-exchange reaction at room temperature. Finally, the Fe-Co₃O₄ NS/CC was obtained via annealing treatment. On account of the compositional and structural superiority, this 3D monolithic anode exhibited outstanding electrocatalytic performance with a low overpotential of 290 mV to obtain a geometrical current density of 10 mA cm^-2 and good durability for water oxidation in base.