Separation of Acetylene from Carbon Dioxide and Ethylene by a Water-Stable Microporous Metal-Organic Framework with Aligned Imidazolium Groups inside the Channels

A Zeolitic Octahedral Metal Oxide with Ultrahigh Porosity for High-temperature and High-humidity Alkyne/Alkene Separation

Zeolitic octahedral metal oxide is a newly synthesized all-inorganic zeolitic material and has been used for adsorption, separation, and catalysis. Herein, a new zeolitic octahedral metal oxide was synthesized and characterized. The porous framework was established through the assembly of [P2Mo13O50] clusters with PO4 linkers. Guest molecules occupied the framework, which could be removed through heat treatment, thereby opening the micropores. The pore characteristics were controlled by the cations within the micropore, enabling the adjustment of the interactions with alkynes and alkenes. This resulted in good separation performance of ethylene/acetylene and propylene/propyne even under high temperature and humidity conditions. The high stability of the material enabled the efficient recovery and reuse without discernible loss in the separation performance. Due to the relatively weak interaction between the adsorbed alkyne and the framework, the adsorbent facilitated the recovery of a highly pure alkyne. This feature enhances the practical applicability of the material in various industrial processes.

An adsorbate biased dynamic 3D porous framework for inverse CO2 sieving over C2H2

Separating carbon dioxide (CO2) from acetylene (C2H2) is one of the most critical and complex industrial separations due to similarities in physicochemical properties and molecular dimensions. Herein, we report a novel Ni-based three-dimensional framework {[Ni4(μ3-OH)2(μ2-OH2)2(1,4-ndc)3](3H2O)}n (1,4-ndc = 1,4-naphthalenedicarboxylate) with a one-dimensional pore channel (3.05 × 3.57 Å2), that perfectly matches with the molecular size of CO2 and C2H2. The dehydrated framework shows structural transformation, decorated with an unsaturated Ni(ii) centre and pendant oxygen atoms. The dynamic nature of the framework is evident by displaying a multistep gate opening type CO2 adsorption at 195, 273, and 298 K, but not for C2H2. The real time breakthrough gas separation experiments reveal a rarely attempted inverse CO2 selectivity over C2H2, attributed to open metal sites with a perfect pore aperture. This is supported by crystallographic analysis, in situ spectroscopic inspection, and selectivity approximations. In situ DRIFTS measurements and DFT-based theoretical calculations confirm CO2 binding sites are coordinatively unsaturated Ni(ii) and carboxylate oxygen atoms, and highlight the influence of multiple adsorption sites.

A Highly Stable Microporous Calcium-Based MOF for C2H2/CO2 Separation with Low Regenerative Energy

Most of the porous materials used for acetylene/carbon dioxide separation have the problems of poor stability and high energy requirements for regeneration, which significantly hinder their practical application in industries. Here, we report a novel calcium-based metal-organic framework (NKM-123) with excellent chemical stability against water, acids, and bases. Additionally, it has exceptional thermal stability, retaining its structural integrity at temperatures up to 300 °C. This material exhibits promising potential for separating C2H2 and CO2 gases. Furthermore, it demonstrates an adsorption heat of 29.3 kJ mol-1 for C2H2, which is lower than that observed in the majority of MOFs used for C2H2/CO2 separations. The preferential adsorption of C2H2 over that of CO2 is confirmed by dispersion-corrected density functional theory (DFT-D) calculations. In addition, the potential of industrial feasibility of NKM-123 for C2H2/CO2 separation is confirmed by transient breakthrough tests. The robust cycle performance and structural stability of NKM-123 during multiple breakthrough tests show great potential in the industrial separation of light hydrocarbons.

A microporous bismuth-based MOF for efficient separation of acetylene from carbon dioxide

The separation of acetylene from carbon dioxide is challenging due to their almost identical molecular sizes and volatilities. Metal-organic frameworks (MOFs) in general are strong candidates for the separation of gas mixtures owing to the presence of functional pore surfaces that can selectively capture specific target molecules. Herein, we report a stable and easily synthesized bismuth-based MOF, Bi-BTC, which can achieve the separation of acetylene and carbon dioxide. We performed a detailed analysis of the sorption properties of the Bi-MOF. Bi-BTC shows good adsorption capacities for C2H2 with a capacity of 53.8 cm3 g-1 at 298 K and 1.0 bar, and C2H2/CO2 selectivity of 5.14/7.69 at 298 K and 1.0/0.1 bar. IAST selectivity calculations indicate that Bi-BTC possesses good separation capacity, and dynamic breakthrough experiments were performed to prove the separation of C2H2 and CO2. Bi-MOFs as a group of relatively less studied types of MOFs have interesting adsorption characteristics, and this study on Bi-based MOF will enrich three-dimensional Bi-MOF adsorbents for gas adsorption and separation applications.

Fluorinated MOF-Based Hexafluoropropylene Nanotrap for Highly Efficient Purification of Octafluoropropane Electronic Specialty Gas

High-purity octafluoropropane (C3F8) electronic specialty gas is a key chemical raw material in semiconductor and integrated circuit manufacturing industry, while selective removal of hexafluoropropylene (C3F6) impurity for C3F8 purification is essential but a challenging task. Here we report a fluorinated cage-like MOF Zn-bzc-CF3 (bzc=5-(trifluoromethyl)-1H-pyrazole-4-carboxylic acid) for C3F6/C3F8 separation. The incorporation of -CF3 groups not only provides suitable pore aperture size for highly efficient size-exclusive C3F6/C3F8 separation, but also creates hydrophobic microenvironments, endowing Zn-bz-CF3 high chemical stability. Remarkably, Zn-bzc-CF3 exhibits high C3F6 adsorption capacity while excluding C3F8, achieving ideal molecular-sieving C3F6/C3F8 separation. Breakthrough experiments show that Zn-bzc-CF3 can efficiently separate C3F6/C3F8 mixture and high-purity C3F8 (99.9 %) can be obtained.

Metal-Organic Frameworks for Water Harvesting and Concurrent Carbon Capture: A Review for Hygroscopic Materials

As water scarcity becomes a pending global issue, hygroscopic materials prove a significant solution. Thus, there is a good cause following the structure-performance relationship to review the recent development of hygroscopic materials and provide inspirational insight into creative materials. Herein, traditional hygroscopic materials, crystalline frameworks, polymers, and composite materials are reviewed. The similarity in working conditions of water harvesting and carbon capture makes simultaneously addressing water shortages and reduction of greenhouse effects possible. Concurrent water harvesting and carbon capture is likely to become a future challenge. Therefore, an emphasis is laid on metal-organic frameworks (MOFs) for their excellent performance in water and CO2 adsorption, and representative role of micro- and mesoporous materials. Herein, the water adsorption mechanisms of MOFs are summarized, followed by a review of MOF's water stability, with a highlight on the emerging machine learning (ML) technique to predict MOF water stability and water uptake. Recent advances in the mechanistic elaboration of moisture's effects on CO2 adsorption are reviewed. This review summarizes recent advances in water-harvesting porous materials with special attention on MOFs and expects to direct researchers' attention into the topic of concurrent water harvesting and carbon capture as a future challenge.

Expanding MOF with Unexpanded Channel via Ketone Decorated Ligand for Ethylene Purification and Stability Enhancement

The concept of an expanding MOF with unexpanded channel size was realized in MOF NTUniv-61 by the utilization of a ketone-functional-group-decorated semirigid ligand and pillar-layer platform. After this unusual expansion, the preferential C2H6 adsorption was preserved via the unchanged pore size, and the functional group was inserted into the MOF. Interestingly, the C2H2 uptake ability, C2H4 selective adsorption ability, and structural stability were obviously enhanced due to the incorporation of the ketone functional group, which were further verified by isosteric heats of adsorption (Qst), GCMC modeling, and breakthrough experiments.

An aliphatic MOF with a molecular sieving effect for efficient C2H2/C2H4 separation

A metal-organic framework, SDMOF-1, with rigid pores of about 3.4 Å, which is appropriate for accommodating C2H2 molecules, exhibits high C2H2 adsorption capacity and great separation capability of the C2H2/C2H4 mixture. This work provides a new method to design aliphatic MOFs with a molecular sieving effect to realize efficient gas separation.

One Co-MOF with F Active Sites for Separation of C2H2 from CO2, C2H4, and CH4

Separating acetylene (C2H2) from other light hydrocarbons and carbon dioxide (CO2) mixtures under mild conditions poses significant challenges due to the remarkably similar properties between C2H2 and those gases. For the goal of C2H2 separation, a F-functionalized organic linker, H2F-PyIP = 2-fluorine-5-(4-pyridyl)isophthalic acid, was designed, and the corresponding metal-organic framework (MOF), {[Co2(F-PyIP)2DMF]·4H2O}n (1), was constructed. The MOF with open channels decorated by the active sites of the F groups revealed the exceptional C2H2 uptake and selectivity over CO2, C2H4, and CH4. The breakthrough experiments with different molar ratios of C2H2-C2H4, C2H2-CO2, and other gas mixtures further verified superior separation capacity of the MOF. In particular, the dynamic separation time intervals for gas mixtures (C2H2/CO2 = 1:1, 1:5, 1:10, and 1:20) fell in the range 30-44 min, highlighting the potential of the MOF for tackling the challenging C2H2/CO2 separation process.

Engineering of Stable Anionic/Neutral MOFs with Zinc-Adeninate Building Units for Efficient C2H2/CO2 Separation

Using adenine and metal ions to form secondary building units (SBUs), further connected by a highly symmetrical multicarboxylic linker to construct an amino-modified porous framework with high porosity, is an effective strategy. By regulating the deprotonation and hydrolysis capacity of the synthesized solvent, it is possible to obtain different charged frameworks. In this work, two stable anionic/neutral MOFs, (Et2NH2)[Zn3(TCPE)(adenine)2CH3COO]·DEF·3H2O (1) and [Zn3.5(adenine)(TCPE)1.5(DMA)(H2O)0.5]·2DMA·2H2O (2), have been synthesized based on zinc-adeninate building units and symmetric tetrakis(4-carboxyphenyl)ethylene (H4TCPE) in N,N-diethylformamide (DEF) and N,N-dimethylacetamide (DMA) reaction systems, respectively. 1 is an anionic framework based on 1D rod zinc-adeninate SBU, containing 1D rectangular (14.3 × 6.3 Å2) and square (14.3 × 14.3 Å2) channels. While 2 is a neutral framework built from isolated zinc-adeninate SBU, it contains hexagonal cages with a dimension of 5.5 Å in the structure. Both of them have high porosity (61.6% for 1 and 46.3% for 2) and high stability in a wide range of pH. 1 and 2 show high C2H2 adsorption capacity at 298 K (48.1 and 70.1 cm3 g-1, respectively) and selective capacity for C2H2/CO2 mixtures, which was confirmed by the breakthrough experiments. Furthermore, the interaction between the frameworks and gas molecules has also been explained by theoretical calculation. This work provides a good example of the design and regulation of porous structures for adsorption and separation functions.

Cucurbituril-Shaped Cd18(triazolate)12 Unit-Based Metal-Organic Framework Exhibiting an C2H2/CO2 Separation Ability

Herein, a metal-organic framework (MOF), {[(Me2NH2)4][Cd(H2O)6][Cd18(TrZ)12(TPD)15(DMF)6]}n (denoted as JXNU-18, TrZ = triazolate), constructed from the unique cucurbituril-shaped Cd18(TrZ)12 secondary building units bridged by 2,5-thiophenedicarboxylic (TPD2-) ligands, is presented. The formation of the cucurbituril-shaped Cd18(TrZ)12 unit is unprecedented, demonstrating the geometric compatibility of the organic linkers and the coordination configurations of the cadmium atoms. Each Cd18(TrZ)12 unit is connected to eight neighboring Cd18(TrZ)12 units through 30 TPD2- linkers, affording the three-dimensional structure of JXNU-18. More interesting is that JXNU-18 displays an efficient C2H2/CO2 separation ability, as revealed by the gas adsorption experiments and dynamic gas breakthrough experiments, which afford insights into the potential applications of JXNU-18 in gas separation. The tubular pores composed of two Cd18(TrZ)12 units bridged by six 2,5-thiophenedicarboxylic linkers provide the suitable pore space for C2H2 trapping, as unveiled by computational simulations.

Interlayer Symmetry Control in Flexible-Robust Layered Metal-Organic Frameworks for Highly Efficient C2H2/CO2 Separation

Removal of the CO2 impurities from C2H2/CO2 mixtures is an essential process to produce high-purity C2H2. Fabricating an adsorbent capable of discriminating these species, which have close kinetic diameters, is critical for developing advanced adsorption processes. Herein, we demonstrate a strategy to exploit the tunability of interlayer and intralayer spaces of two-dimensional (2D) layered metal-organic frameworks to achieve high performance for C2H2/CO2 separation. This indicates that interlayer symmetrical control can achieve more efficient packing of C2H2 into Ni(4-DPDS)2CrO4, with a high C2H2 capacity of 45.7 cm3·g-1 at 0.01 bar and a selectivity of 67.7 (298 K, 1 bar), which strikes a good balance between working capacity and separation selectivity compared to other isostructural Ni(4-DPDS)2MO4 (M = Mo, W). Crystallographic studies and DFT-D calculations reveal that such a C2H2-selective adsorbent possesses strong binding interactions due to the tailored pore confinement provided by the angular anions and rich electronic environment. Experimental breakthrough results comprehensively demonstrate the efficient C2H2/CO2 separation performance of this unique material.

Topological Design of Unprecedented Metal-Organic Frameworks Featuring Multiple Anion Functionalities and Hierarchical Porosity for Benchmark Acetylene Separation

Separation of acetylene (C2 H2 ) from carbon dioxide (CO2 ) or ethylene (C2 H4 ) is industrially important but still challenging so far. Herein, we developed two novel robust metal organic frameworks AlFSIX-Cu-TPBDA (ZNU-8) with znv topology and SIFSIX-Cu-TPBDA (ZNU-9) with wly topology for efficient capture of C2 H2 from CO2 and C2 H4 . Both ZNU-8 and ZNU-9 feature multiple anion functionalities and hierarchical porosity. Notably, ZNU-9 with more anionic binding sites and three distinct cages displays both an extremely large C2 H2 capacity (7.94 mmol/g) and a high C2 H2 /CO2 (10.3) or C2 H2 /C2 H4 (11.6) selectivity. The calculated capacity of C2 H2 per anion (4.94 mol/mol at 1 bar) is the highest among all the anion pillared metal organic frameworks. Theoretical calculation indicated that the strong cooperative hydrogen bonds exist between acetylene and the pillared SiF6 2- anions in the confined cavity, which is further confirmed by in situ IR spectra. The practical separation performance was explicitly demonstrated by dynamic breakthrough experiments with equimolar C2 H2 /CO2 mixtures and 1/99 C2 H2 /C2 H4 mixtures under various conditions with excellent recyclability and benchmark productivity of pure C2 H2 (5.13 mmol/g) or C2 H4 (48.57 mmol/g).

Programmed fluorine binding engineering in anion-pillared metal-organic framework for record trace acetylene capture from ethylene

Porous physisorbents are attractive candidates for selective capture of trace gas or volatile compounds due to their low energy footprints. However, many physisorbents suffer from insufficient sorbate-sorbent interactions, resulting in low uptake or inadequate selectivity when gases are present at trace levels. Here, we report a strategy of programmed fluorine binding engineering in anion-pillared metal-organic frameworks to maximize C2H2 binding affinity for benchmark trace C2H2 capture from C2H4. A robust material (ZJU-300a) was elaborately designed to provide multiple-site fluorine binding model, resulting in an ultrastrong C2H2 binding affinity. ZJU-300a exhibits a record-high C2H2 uptake of 3.23 millimoles per gram (at 0.01 bar and 296 kelvin) and one of the highest C2H2/C2H4 selectivity (1672). The adsorption binding of C2H2 and C2H4 was visualized by gas-loaded ZJU-300a structures. The separation capacity was confirmed by breakthrough experiments for 1/99 C2H2/C2H4 mixtures, affording the maximal dynamic selectivity (264) and C2H4 productivity of 436.7 millimoles per gram.

Cu-MOFs with Rich Open Metal and F Sites for Separation of C2H2 from CO2 and CH4

Herein, we used the 4-fluoro-[1,1'-biphenyl]-3,4',5-tricarboxylic acid (H₃fbptc) ligand to design and construct a new metal-organic framework (MOF), [Cu₃(fbptc)₂(H₂O)₃]·3NMP (1), which possesses rich accessible metal sites and F functional groups in the porous walls and shows high uptake for C₂H₂ (119.3 cm³ g^-1) and significant adsorption selectivity for C₂H₂ over CH₄ (14.4) and CO₂ (3.6) at 298 K and 100 kPa. In particular, for the gas mixtures of C₂H₂-CH₄ and C₂H₂-CO₂, the MOF reveals large breakthrough time ratios (C₂H₂/CH₄ = 13, C₂H₂/CO₂ = 5.9), which are particularly prominent in dynamic breakthrough experiments, also confirming the excellent potential for the practical separation of C₂H₂ from two-component mixtures (C₂H₂-CH₄ and C₂H₂-CO₂) and even three-component mixtures (C₂H₂-CO₂-CH₄).

Highly Efficient CO2/C2H2 Separation by Porous Graphene via Quadrupole Gating Mechanism

Acetylene (C₂H₂) is an important and widely used raw material in various industries (such as petrochemical). Generally, a product yield is proportional to the purity of C₂H₂; however, C₂H₂ from a typical industrial gas-production process is commonly contaminated by CO₂. So far, the achievement of high-purity C₂H₂ separated from a CO₂/C₂H₂ mixture is still challenging due to their very close molecular dimensions and boiling temperatures. Taking advantage of their quadrupoles with opposite signs, here, we show that the graphene membrane embedded with crown ether nanopores can achieve an unprecedented separation efficiency of CO₂/C₂H₂. Combining the molecular dynamics simulation and the density functional theory (DFT) approaches, we discovered that the electrostatic gas-pore interaction favorably allows the fast transport of CO₂ through crown ether nanopores while completely prohibiting C₂H₂ transport, which yields a remarkable permeation selectivity. In particular, the utilized crown ether pore is capable of allowing the individual transport of CO₂ while completely rejecting the passage of C₂H₂, independent of the applied pressures, fed gases ratios, and exerted temperatures, featuring the superiority and robustness of the crown pore in CO₂/C₂H₂ separation. Further, DFT and PMF calculations demonstrate that the transport of CO₂ through the crown pore is energetically more favorable than the transport of C₂H₂. Our findings reveal the potential application of graphene crown pore for CO₂ separation with outstanding performance.

Immobilization of the Polar Group into an Ultramicroporous Metal-Organic Framework Enabling Benchmark Inverse Selective CO2/C2H2 Separation with Record C2H2 Production

One-step harvest of high-purity light hydrocarbons without the desorption process represents an advanced and highly efficient strategy for the purification of target substances. The separation and purification of acetylene (C₂H₂) from carbon dioxide (CO₂) by CO₂-selective adsorbents are urgently demanded yet are very challenging owing to their similar physicochemical properties. Here, we employ the pore chemistry strategy to adjust the pore environment by immobilizing polar groups into an ultramicroporous metal-organic framework (MOF), achieving one-step manufacture of high-purity C₂H₂ from CO₂/C₂H₂ mixtures. Embedding methyl groups into prototype stable MOF (Zn-ox-trz) not only changes the pore environment but also improves the discrimination of guest molecules. The methyl-functionalized Zn-ox-mtz thus exhibits the benchmark reverse CO₂/C₂H₂ uptake ratio of 12.6 (123.32/9.79 cm³ cm^-3) and an exceptionally high equimolar CO₂/C₂H₂ selectivity of 1064.9 at ambient conditions. Molecular simulations reveal that the synergetic effect of pore confinement and surfaces decorated with methyl groups provides high recognition of CO₂ molecules through multiple van der Waals interactions. The column breakthrough experiments suggest that Zn-ox-mtz dramatically achieved the one-step purification capacity of C₂H₂ from the CO₂/C₂H₂ mixture with a record C₂H₂ productivity of 2091 mmol kg^-1, surpassing all of the CO₂-selective adsorbents reported so far. In addition, Zn-ox-mtz exhibits excellent chemical stability under different pH values of aqueous solutions (pH = 1-12). Moreover, the highly stable framework and excellent inverse selective CO₂/C₂H₂ separation performance showcase its promising application as a C₂H₂ splitter for industrial manufacture. This work paves the way to developing reverse-selective adsorbents for the challenging gas separation process.

Fine-Tuning MOFs with Amino Group for One-Step Ethylene Purification from the C2 Hydrocarbon Mixture

Due to the similar kinetic diameters of C₂H₂, C₂H₄, and C₂H₆, one-step purification of C₂H₄ from a ternary C₂H₂/C₂H₄/C₂H₆ mixture by adsorption separation is still a challenge. Based on a C₂H₆-trapping platform and crystal engineering strategy, the N atom and amino group were introduced into NTUniv-58 and NTUniv-59, respectively. Gas adsorption testing of NTUniv-58 showed that both the C₂H₂ and C₂H₄ uptake capacities and the C₂H₂/C₂H₄ separation ability were boosted compared with the original platform. However, the C₂H₄ uptake value exceeds the C₂H₆ adsorption data. For NTUniv-59, the C₂H₂ uptake at low pressure increased and the C₂H₄ uptake decreased; thus, the C₂H₂/C₂H₄ selectivity was enhanced and the one-step purification of C₂H₄ from a ternary C₂H₂/C₂H₄/C₂H₆ mixture was realized, which was supported by the enthalpy of adsorption (Q_st) and breakthrough testing. Grand canonical monte carlo (GCMC) simulation indicated that the preference for C₂H₂ over C₂H₄ originates from multiple hydrogen-bonding interactions between amino groups and C₂H₂ molecules.

Highly Selective Separation of C2H2/CO2 and C2H2/C2H4 in an N-Rich Cage-Based Microporous Metal-Organic Framework

The separation of acetylene (C2H2) from carbon dioxide (CO2) and the purification of ethylene (C2H4) from C2H2 are quite essential processes for the chemical industry. However, these processes are challenging due to their similar physical properties, including molecule sizes and boiling points. Herein, we report an N-rich cage-based microporous metal-organic framework (MOF), [Cd5(Tz)9](NO3) (termed as Cd-TZ, TZ stands for tetrazole), and its highly efficient separation of C2H2/CO2 and C2H2/C2H4. Single-component gas adsorption isotherms reveal that Cd-TZ exhibits high C2H2 adsorption capacity (3.10 mmol g-1 at 298 K and 1 bar). The N-rich cages in Cd-TZ can trap C2H2 with a higher isosteric heat of adsorption (40.8 kJ mol-1) than CO2 and C2H4 owing to the robust host-guest interactions between the noncoordinated N atoms and C2H2, which has been verified by molecular modeling studies. Cd-TZ shows a high IAST selectivity for C2H2/CO2 (8.3) and C2H2/C2H4 (13.3). The breakthrough simulations confirm the potential for separating C2H2/CO2 and the purification of C2H4 from C2H2.

De-Linker-Enabled Exceptional Volumetric Acetylene Storage Capacity and Benchmark C2 H2 /C2 H4 and C2 H2 /CO2 Separations in Metal-Organic Frameworks

An ideal adsorbent for separation requires optimizing both storage capacity and selectivity, but maximizing both or achieving a desired balance remain challenging. Herein, a de-linker strategy is proposed to address this issue for metal-organic frameworks (MOFs). Broadly speaking, the de-linker idea targets a class of materials that may be viewed as being intermediate between zeolites and MOFs. Its feasibility is shown here by a series of ultra-microporous MOFs (SNNU-98-M, M=Mn, Co, Ni, Zn). SNNU-98 exhibit high volumetric C₂ H₂ uptake capacity under low and ambient pressures (175.3 cm³  cm^-3 @ 0.1 bar, 222.9 cm³  cm^-3 @ 1 bar, 298 K), as well as extraordinary selectivity (2405.7 for C₂ H₂ /C₂ H₄ , 22.7 for C₂ H₂ /CO₂ ). Remarkably, SNNU-98-Mn can efficiently separate C₂ H₂ from C₂ H₂ /CO₂ and C₂ H₂ /C₂ H₄ mixtures with a benchmark C₂ H₂ /C₂ H₄ (1/99) breakthrough time of 2325 min g^-1 , and produce 99.9999 % C₂ H₄ with a productivity up to 64.6 mmol g^-1 , surpassing values of reported MOF adsorbents.

Strengthening Intraframework Interaction within Flexible MOFs Demonstrates Simultaneous Sieving Acetylene from Ethylene and Carbon Dioxide

Efficient separation of acetylene (C₂ H₂ )/ethylene (C₂ H₄ ) and acetylene/carbon dioxide (CO₂ ) by adsorption is an industrially promising process, but adsorbents capable of simultaneously capturing trace acetylene from ethylene and carbon dioxide are scarce. Herein, a gate-opening effect on three isomorphous flexible metal-organic frameworks (MOFs) named Co(4-DPDS)₂ MO₄ (M = Cr, Mo, W; 4-DPDS = 4,4-dipyridyldisulfide) is modulated by anion pillars substitution. The shortest CrO₄ ^2- strengthens intraframework hydrogen bonding and thus blocks structural transformation after activation, striking a good balance among working capacity, separation selectivity, and trace impurity removal of flexible MOFs out of nearly C₂ H₂ /C₂ H₄ and C₂ H₂ /CO₂ molecular sieving. The exceptional separation performance of Co(4-DPDS)₂ CrO₄ is confirmed by dynamic breakthrough experiments. It reveals the specific threshold pressures control in anion-pillared flexible materials enabled elimination of the impurity leakage to realize high purity products through precise control of the intraframework interaction. The adsorption mechanism and multimode structural transformation property are revealed by both calculations and crystallography studies. This work demonstrates the feasibility of modulating flexibility for controlling gate-opening effect, especially for some cases of significant aperture shrinkage after activation.

Optimizing Acetylene Sorption through Induced-fit Transformations in a Chemically Stable Microporous Framework

Developing practical storage technologies for acetylene (C₂ H₂ ) is important but challenging because C₂ H₂ is useful but explosive. Here, a novel metal-organic framework (MOF) (FJI-H36) with adaptive channels was prepared. It can effectively capture C₂ H₂ (159.9 cm³  cm^-3 ) at 1 atm and 298 K, possessing a record-high storage density (561 g L^-1 ) but a very low adsorption enthalpy (28 kJ mol^-1 ) among all the reported MOFs. Structural analyses show that such excellent adsorption performance comes from the synergism of active sites, flexible framework, and matched pores; where the adsorbed-C₂ H₂ can drive FJI-H36 to undergo induced-fit transformations step by step, including deformation/reconstruction of channels, contraction of pores, and transformation of active sites, finally leading to dense packing of C₂ H₂ . Moreover, FJI-H36 has excellent chemical stability and recyclability, and can be prepared on a large scale, enabling it as a practical adsorbent for C₂ H₂ . This will provide a useful strategy for developing practical and efficient adsorbents for C₂ H₂ storage.

Developing Water-Stable Pore-Partitioned Metal-Organic Frameworks with Multi-Level Symmetry for High-Performance Sorption Applications

A new perspective is proposed in the design of pore-space-partitioned MOFs that is focused on ligand symmetry properties sub-divided here into three hierarchical levels: 1) overall ligand, 2) ligand substructure such as backbone or core, and 3) the substituent groups. Different combinations of the above symmetry properties exist. Given the close correlation between nature of chemical moiety and its symmetry, such a unique perspective into ligand symmetry and sub-symmetry in MOF design translates into the influences on MOF properties. Five new MOFs have been prepared that exhibit excellent hydrothermal stability and high-performance adsorption properties with potential applications such as C₃ H₆ /C₂ H₄ and C₂ H₂ /CO₂ selective adsorption. The combination of high stability with high benzene/cyclohexane selectivity of ≈13.7 is also of particular interest.

Extraordinary Separation of Acetylene-Containing Mixtures in a Honeycomb Calcium-Based MOF with Multiple Active Sites

Acetylene (C₂H₂) separation from multicomponent mixtures is vitally important but industrially challenging for the collection of high-purity C₂H₂. To address this requirement, the reaction between the alkaline-earth Ca²⁺ ions with a dicarboxylate-diazolate linker, 4,6-di(1H-tetrazol-5-yl)isophthalic acid (H₄dtzip), gave rise to a new metal-organic framework (MOF) material [Ca(dtzip)_0.5H₂O]·2H₂O (1). The material presents unique regular tubular channels based on threefolded helical rod-like secondary building units with rich open metal sites and exposed organic hydrogen-bonding N/O acceptors that enhance the interactions with C₂H₂ molecules, endowing significant selectivity for C₂H₂ over C₂H₄ (5.4), C₂H₆ (5.6), CH₄ (30.0), and CO₂ (7.7) at 298 K and 100 kPa. Column breakthrough experiments confirmed the extraordinary C₂H₂ separation performance of the material with the separation time intervals in the range of 18-24 min g^-1 for binary (C₂H₂-C₂H₄, C₂H₂-C₂H₆, C₂H₂-CO₂, and C₂H₂-CH₄) or ternary (C₂H₂-C₂H₄-C₂H₆ and C₂H₂-C₂H₄-CO₂) gas mixtures under dynamic conditions.

Ionic metal-organic frameworks (iMOFs): progress and prospects as ionic functional materials

Metal-organic frameworks (MOFs) have been a research hotspot for the last two decades, witnessing an extraordinary upsurge across various domains in materials chemistry. Ionic MOFs (both anionic and cationic MOFs) have emerged as next-generation ionic functional materials and are an important subclass of MOFs owing to their ability to generate strong electrostatic interactions between their charged framework and guest molecules. Furthermore, the presence of extra-framework counter-ions in their confined nanospaces can serve as additional functionality in these materials, which endows them a significant advantage in specific host-guest interactions and ion-exchange-based applications. In the present review, we summarize the progress and future prospects of iMOFs both in terms of fundamental developments and potential applications. Furthermore, the design principles of ionic MOFs and their state-of-the-art ion exchange performances are discussed in detail and the future perspectives of these promising ionic materials are proposed.

Spatial disposition of square-planar mononuclear nodes in metal-organic frameworks for C2H2/CO2 separation

The efficient separation of acetylene (C2H2) from its mixture with carbon dioxide (CO2) remains a challenging industrial process due to their close molecular sizes/shapes and similar physical properties. Herein, we report a microporous metal-organic framework (JNU-4) with square-planar mononuclear copper(ii) centers as nodes and tetrahedral organic linkers as spacers, allowing for two accessible binding sites per metal center for C2H2 molecules. Consequently, JNU-4 exhibits excellent C2H2 adsorption capacity, particularly at 298 K and 0.5 bar (200 cm3 g-1). Detailed computational studies confirm that C2H2 molecules are indeed predominantly located in close proximity to the square-planar copper centers on both sides. Breakthrough experiments demonstrate that JNU-4 is capable of efficiently separating C2H2 from a 50 : 50 C2H2/CO2 mixture over a broad range of flow rates, affording by far the largest C2H2 capture capacity (160 cm3 g-1) and fuel-grade C2H2 production (105 cm3 g-1, ≥98% purity) upon desorption. Simply by maximizing accessible open metal sites on mononuclear metal centers, this work presents a promising strategy to improve the C2H2 adsorption capacity and address the challenging C2H2/CO2 separation.

Optimization of Pore-Space-Partitioned Metal–Organic Frameworks Using the Bioisosteric Concept

Pore space partitioning (PSP) is methodically suited for dramatically increasing the density of guest binding sites, leading to the partitioned acs (pacs) platform capable of record-high uptake for CO₂ and small hydrocarbons such as C₂H_x. For gas separation, achieving high selectivity amid PSP-enabled high uptake offers an enticing prospect. Here we aim for high selectivity by introducing the bioisosteric (BIS) concept, a widely used drug design strategy, into the realm of pore-space-partitioned MOFs. New pacs materials have high C₂H₂/CO₂ selectivity of up to 29, high C₂H₂ uptake of up to 144 cm³/g (298 K, 1 atm), and high separation potential of up to 5.3 mmol/g, leading to excellent experimental breakthrough performance. These metrics, coupled with exceptional tunability, high stability, and low regeneration energy, demonstrate the broad potential of the BIS-PSP strategy.

A three dimensional graphdiyne-like porous triptycene network for gas adsorption and separation

Graphdiyne, an emerging carbon allotrope, has attracted many researchers devoted to the study of its synthesis and application. The utilization of graphdiyne in gas adsorption and separation has been predicted by computer simulation with many examples. In this work, the triangular basic unit of graphdiyne was introduced into a triptycene-based porous organic polymer to obtain a three dimensional graphdiyne-like porous triptycene network named G-PTN. With high surface area and a microporous structure, G-PTN exhibited convincing application potential for the storage of gas molecules, especially for the selective adsorption of acetylene over ethylene. Computational simulation proved the importance of the triptycene units and three dimensional structure to the selectivity, as well as the potential of graphdiyne units as selective binding sites, suggesting that through judicious design, new three-dimensional porous graphdiyne could be acquired with better gas adsorption and separation performance.

Partial Linker Substitution Strategy to Construct a Quaternary HKUST-like MOF for Efficient Acetylene Storage and Separation

Multicomponent metal-organic frameworks (MOFs) have received much attention as emerging materials capable of precisely programing exquisite structures and specific functions. Here, we applied a partial linker substitution strategy to compile an HKUST-1-like quaternary MOF by introducing a bifunctional ligand into the well-known HKUST-1 structure. FUT-1, a new HKUST-like tbo topology MOF, was assembled with paddlewheel [Cu₂(COO)₄], triangular metallocycle pyrazole cluster Cu₃(μ₃-OH) (NN)₃ building blocks, and two distinct linkers. FUT-1 exhibited good mechanical stability, water stability, and chemical stability (pH = 3-12) in aqueous solutions. Moreover, the porous environments created by this multicomponent primitive endow FUT-1 with high C₂H₂ storage and significantly selective separation performance of C₂H₂/CO₂. Dynamic breakthrough experiments and ideal adsorbed solution theory calculations further demonstrate that FUT-1 can selectively capture C₂H₂ from C₂H₂/CO₂ mixtures under ambient conditions. Based on grand canonical Monte Carlo simulations, the high C₂H₂ separation performance of FUT-1 is attributed to the π-complex formed between the C₂H₂ molecule and the trinuclear metallocycle clusters on the wall, which provides stronger affinity for C₂H₂ recognition than the CO₂ molecule.

Effect of Orbital-Symmetry Matching in a Metal-Organic Framework for Highly Efficient C2H2/C2H4 and C2H2/CO2 Separations

The detailed mechanism of metal-organic-framework (MOF)-based separation materials is still obscure, which obviously hinders their actual application. To address this problem, a trinuclear Cu-cluster-based MOF with a minimum metal-active plane was synthesized for the study of the very challenging C₂H₂/C₂H₄ and C₂H₂/CO₂ separations. Via dispersion-corrected density functional theory calculations, it is indicated that the difference of the adsorption energy accounts for the excellent separation properties toward C₂H₂/C₂H₄ and C₂H₂/CO₂ mixtures, while the frontier molecular orbitals demonstrate that the adsorption-energy difference originates from the orbital-symmetry difference of gas molecules. All of these results provide not only deep insight into the separation mechanism but also an alternative strategy to prepare efficient adsorbents.

C2H2 capture and separation in a MOF based on Ni6 trigonal-prismatic units

A honeycomb MOF, based on rare Ni₆ trigonal-prismatic supermolecular building blocks, was fabricated by utilizing an unexploited [1,1'-biphenyl]-3,3',5,5'-tetracarboxylic acid linker with -NH₂ substituent groups. The MOF contains novel building blocks and an enchanting structure, and also exhibits water-stable characteristics. Uniquely, the accessible adsorption sites, arising due to the high-density Lewis-basic amino-coordinated groups and uncoordinated carboxylate O atoms in the pores, endow the MOF with excellent capture and separation capabilities for C₂H₂.

Anion Regulates Topological Porous Coordination Polymers into the Acetylene Trap

The development of efficient porous absorbents with high uptake and selectivity remains a great challenge, especially for the recovery of acetylene (C₂H₂) from its carbon dioxide (CO₂)-containing mixtures. Here, we propose and report an anion-planting strategy for regulating the scu topological porous coordination polymers (PCPs) into the C₂H₂ trap. The three electronegative anions SiF₆^2-, TiF₆^2-, and ZrF₆^2-, in addition to the ligand of 3,5-di(1H-imidazol-1-yl)benzoic acid (HL) and Cu²⁺ ion, were employed to construct highly porous PCPs (NTU-60, NTU-61, and NTU-62) with varied window aperture. Especially, due to a matching distance (d_F-F) of 5.7 Å along the c-axis, the limited space that can be assigned as a single C₂H₂ trap enables NTU-61 to show optimal ability for C₂H₂ (van der Waals (vdW) parameters of the two H atoms: ∼5.72 Å) recognition, validated by Grand Canonical Monte Carlo (GCMC) calculations and Raman spectra. These characteristics allow the NTU-series to show higher C₂H₂ uptake, as well as excellent C₂H₂/CO₂ separation performance under dynamic conditions. The molecular insight and strategy here not only permit balanced adsorption and separation in a single domain but also exhibit an opportunity to develop advanced adsorbents in nearly all frameworks with lattice or coordinated ions, which may act as the platforms for various selective guest trappings with on-demand time and/or spatial resolution.

Reversible ammonia uptake at room temperature in a robust and tunable metal-organic framework

Ammonia is useful for the production of fertilizers and chemicals for modern technology, but its high toxicity and corrosiveness are harmful to the environment and human health. Here, we report the recyclable and tunable ammonia adsorption using a robust imidazolium-based MOF (JCM-1) that uptakes 5.7 mmol g⁻¹ of NH₃ at 298 K reversibly without structural deformation. Furthermore, a simple substitution of NO₃⁻ with Cl⁻ in a post-synthetic manner leads to an increase in the NH₃ uptake capacity of JCM-1(Cl⁻) up to 7.2 mmol g⁻¹.

Recyclable and tunable ammonia adsorption with JCM-1 and JCM-1(Cl⁻) at room temperature occurs reversibly without structural decomposition.

A (3,8)-Connected Metal-Organic Framework with Bending Dicarboxylate Linkers for C2H2/CO2 Separation

Herein, by replacement of the linear terephthalate linker with the bending 2,5-thiophenedicarboxylate (tdc^2-) linker in the typical (3,9)-connected metal-organic framework, with a reduced 8-connected hydroxyl-centered trinuclear cluster, a new (3,8)-connected network, [Ni₃(μ₃-OH)(tdc)₃(tpp)] [DZU-1; tpp = 2,4,6-tris(4-pyridyl)pyridine], was synthesized. The modified pore environment enables DZU-1 to selectively adsorb C₂H₂ over CO₂ in an efficient manner.

Micropore Regulation in Ultrastable [Sc3O]-Organic Frameworks for Acetylene Storage and Purification

High storage capacity, high separation selectivity, and high structure stability are essential for an idea gas adsorbent. However, it is not easy to achieve all three at the same time, even for the promising metal-organic framework (MOF) adsorbents. We demonstrate herein that robust [Sc₃O]-organic frameworks could be regulated by a micropore combination strategy for high-performance acetylene adsorption. Under the same solvent system with formic acid as a modulator, similar tritopic ligands extend [Sc₃O(COO)₆] trigonal-prismatic clusters to generate SNNU-5-Sc and SNNU-150-Sc adsorbents. Notably, the two Sc-MOFs can keep their architectures over 24 h in water at different pH values (2-12) or at 90 °C. Modulated by the linker symmetry, the final stacking metal-organic polyhedral cages produce open window sizes of about 10 Å for SNNU-5-Sc and 5 Å + 7 Å for SNNU-150-Sc. Due to such micropore combinations, SNNU-5-Sc exhibits a top-level C₂H₂ uptake of 211.2 cm³ g^-1 (1 atm and 273 K) and SNNU-150-Sc shows high C₂H₂/CH₄, C₂H₂/C₂H₄, and C₂H₂/CO₂ selectivities of 80.65, 4.03, and 8.19, respectively, under ambient conditions. Dynamic breakthrough curves obtained on a fixed-bed column and grand canonical Monte Carlo (GCMC) simulations further support their prominent acetylene storage and purification performance. High framework stability, storage capacity, and separation selectivity make SNNU-5-Sc and SNNU-150-Sc ideal acetylene adsorbents in practical applications.

Immobilization of Lewis Basic Sites into a Stable Ethane-Selective MOF Enabling One-Step Separation of Ethylene from a Ternary Mixture

Purification of C₂H₄ from a ternary C₂H₂/C₂H₆/C₂H₄ mixture by one-step adsorption separation is of prime importance but challenging in the petrochemical industry; however, effective strategies to design high-performance adsorbents are lacking. We herein report for the first time the incorporation of Lewis basic sites into a C₂H₆-selective MOF, enabling efficient one-step production of polymer-grade C₂H₄ from ternary mixtures. Introduction of amino groups into highly stable C₂H₆-selective UiO-67 can not only partition large pores into smaller cagelike pockets to provide suitable pore confinement but also offer additional binding sites to simultaneously enhance C₂H₂ and C₂H₆ adsorption capacities over C₂H₄. The amino-functionalized UiO-67-(NH₂)₂ thus exhibits exceptionally high C₂H₂ and C₂H₆ uptakes as well as benchmark C₂H₂/C₂H₄ and C₂H₆/C₂H₄ selectivities, surpassing all of the C₂H₂/C₂H₆-selective materials reported so far. Theoretical calculations combined with in situ infrared spectroscopy indicate that the synergetic effect of suitable pore confinement and functional surfaces decorated with amino groups provides overall stronger multipoint van der Waals interactions with C₂H₂ and C₂H₆ over C₂H₄. The exceptional performance of UiO-67-(NH₂)₂ was evidenced by breakthrough experiments for C₂H₂/C₂H₆/C₂H₄ mixtures under dry and wet conditions, providing a remarkable C₂H₄ productivity of 0.55 mmol g^-1 at ambient conditions.

Recent progress on porous MOFs for process-efficient hydrocarbon separation, luminescent sensing, and information encryption

Metal-organic frameworks (MOFs), as an emerging class of porous materials, excel in designability, regulatability, and modifiability in terms of their composition, topology, pore size, and surface chemistry, thus affording a huge potential for addressing environment and energy-related challenges. In particular, MOFs can be applied as porous adsorbents for the purification of industrially important hydrocarbons through certain process-efficient separation schemes based on selectivity-reversed adsorption and multicomponent separation. Moreover, the vast combination possibilities and controllable and engineerable luminescent units of MOFs make them a versatile platform to develop functionally tailored materials for luminescent sensing and optical data encryption. In this feature article, we summarize the recent progress in the use of porous MOFs for the separation and purification of acetylene (C₂H₂) and ethylene (C₂H₄) based on selectivity-reversed adsorption and multicomponent separation strategies. Moreover, we highlight the advances over the past three years in the field of MOF-based luminescent materials for thermometry, turn-on sensing, and information encryption.

A new boron cluster anion pillared metal organic framework with ligand inclusion and its selective acetylene capture properties

A novel microporous boron cluster pillared metal–organic framework BSF-10 was synthesized with ligand inclusion for efficient C2H2/CO2 and C2H2/C2H4 adsorption separation.