Dynamic Coupling at Low Reynolds Number

Ultrasound-Chargeable Persistent Luminescence Nanoparticles to Generate Self-Propelled Motion and Photothermal/NO Therapy for Synergistic Tumor Treatment

Cancer phototherapy indicates advantages in ease of manipulation, negligible drug resistance, and spatiotemporal control but is confronted with challenges in tumor cell accessibility and intermittent light excitation. Herein, we propose a strategy with persistent luminescence (PL)-excited photothermal therapy (PTT), concurrent thermophoresis-propelled motion, and PL-triggered NO release, where PL emission is chargeable by ultrasonication for readily applicable to deep tumors. Mechanoluminescent (ML) nanodots of SrAl2O4:Eu2+ (SAOE) and PL nanodots of ZnGa2O4:Cr3+ (ZGC) were deposited on mesoporous silicates to obtain mSZ nanoparticles (NPs), followed by partially coating with polydopamine (PDA) caps and loading NO donors to prepare Janus mSZ@PDA-NO NPs. The ML emission bands of SAOE nanodots overlap with the excitation band of ZGC, and the persistent near-infrared (NIR) emission could be repeatedly activated by ultrasonication. The PL emission acts as an internal NIR source to produce a thermophoretic force and NO gas propellers to drive the motion of Janus NPs. Compared with the commonly used intermittent NIR illumination at both 660 and 808 nm, the persistent motion of ultrasound-activated NPs enhances cellular uptake and long-lasting PTT and intracellular NO levels to combat tumor cells without the use of any chemotherapeutic drugs. The ultrasound-activated persistent motion promotes intratumoral accumulation and tumor distribution of PTT/NO therapeutics and exhibits significantly higher tumor growth inhibition, longer animal survival, and larger intratumoral NO levels than those who experience external NIR illumination. Thus, this study demonstrates a strategy to activate PL emissions and construct PL-excited nanomotors for phototherapy in deep tissues.

Impact Response of the Tail Beam Jack Based on Bidirectional Fluid-Structure Coupling Simulation

In top coal caving mining, the coal rock collapse will cause an irregular impact on the tail beam jack of the caving control mechanism. The severe impact will lead to jack failure. The bidirectional fluid-structure coupling model is built on Fluent and Mechanical software to study the impact response of the tail beam jack. The dynamic flow velocity streamlines, hydraulic pressure distribution, stress field, and strain field of the jack under impact load are extracted. The response characteristics of the jack in the stationary state and motion state are analyzed. The conclusions are as follows: the stress and strain of the rodless cavity are much larger than those of the rod cavity, which is more likely to be damaged. The hydraulic pressure in the jack cavity is in vertical layered distribution. The flow velocity streamlines present spiral shapes. The response degree of the hydraulic pressure signal in the rodless cavity is stronger than that in the rod cavity, and the response degree of the flow velocity signal in the rod cavity is stronger than that in the rodless cavity. The impact response of the jack in the motion state is more sensitive and stronger than that in the stationary state. The coal rock collapse situation can be most effectively identified only by comprehensively analyzing the rodless cavity's pressure signal and the rod cavity's velocity signal. This paper innovatively visualizes the flow velocity streamlines and pressure distribution together. The bidirectional fluid-structure coupling method is innovatively applied to the tail beam jack. The findings of this study can help for better understanding of the tail beam jack's structural design and failure prevention. This study provides a certain research basis for the intelligent coal rock identification technology in mining coal based on jack vibration signals.

Active matter dynamics in confined microfluidic environments

The field of active matter is a nascent area of research in soft condensed matter physics, which is drawing on the expertise of researchers from diverse disciplines. Small scale active particles-both inorganic and biological-display non-trivial emergent dynamics and interactions that could help us understand complex biological processes and phenomena. Recently, using microfluidic technologies, several research groups have performed important experimental and theoretical studies to understand the behavior of self-propelled particles and molecular active matter within confined environments-to glean a fundamental understanding of the cellular processes occurring under ultra-low Reynolds number conditions. In this chapter, we would like to review applications of microfluidics in active matter research, highlighting a few important theoretical and experimental investigations. We will conclude the discussion with a note on the future of this field mentioning a few open questions that are at the forefront of our minds.

Micro-Bio-Chemo-Mechanical-Systems: Micromotors, Microfluidics, and Nanozymes for Biomedical Applications

Wireless nano-/micromotors powered by chemical reactions and/or external fields generate motive forces, perform tasks, and significantly extend short-range dynamic responses of passive biomedical microcarriers. However, before micromotors can be translated into clinical use, several major problems, including the biocompatibility of materials, the toxicity of chemical fuels, and deep tissue imaging methods, must be solved. Nanomaterials with enzyme-like characteristics (e.g., catalase, oxidase, peroxidase, superoxide dismutase), that is, nanozymes, can significantly expand the scope of micromotors' chemical fuels. A convergence of nanozymes, micromotors, and microfluidics can lead to a paradigm shift in the fabrication of multifunctional micromotors in reasonable quantities, encapsulation of desired subsystems, and engineering of FDA-approved core-shell structures with tuneable biological, physical, chemical, and mechanical properties. Microfluidic methods are used to prepare stable bubbles/microbubbles and capsules integrating ultrasound, optoacoustic, fluorescent, and magnetic resonance imaging modalities. The aim here is to discuss an interdisciplinary approach of three independent emerging topics: micromotors, nanozymes, and microfluidics to creatively: 1) embrace new ideas, 2) think across boundaries, and 3) solve problems whose solutions are beyond the scope of a single discipline toward the development of micro-bio-chemo-mechanical-systems for diverse bioapplications.

Chemically-powered swimming and diffusion in the microscopic world

The past decade has seen intriguing reports and heated debates concerning the chemically-driven enhanced motion of objects ranging from small molecules to millimetre-size synthetic robots. These objects, in solutions in which chemical reactions were occurring, were observed to diffuse (spread non-directionally) or swim (move directionally) at rates exceeding those expected from Brownian motion alone. The debates have focused on whether observed enhancement is an experimental artefact or a real phenomenon. If the latter were true, then we would also need to explain how the chemical energy is converted into mechanical work. In this Perspective, we summarize and discuss recent observations and theories of active diffusion and swimming. Notably, the chemomechanical coupling and magnitude of diffusion enhancement are strongly size-dependent and should vanish as the size of the swimmers approaches the molecular scale. We evaluate the reliability of common techniques to measure diffusion coefficients and finish by considering the potential applications and chemical to mechanical energy conversion efficiencies of typical nanoswimmers and microswimmers.

Cooperative and synchronized rotation in motorized porous frameworks: impact on local and global transport properties of confined fluids

Simulations reveal the influence of rotating molecular motors and the importance of orientation and directionality for altering the transport properties of fluids. This has outlined that motors with specific rotation can generate directed diffusion.

Mechanochemical enzymes and protein machines as hydrodynamic force dipoles: the active dimer model

Mechanochemically active enzymes change their shapes within every turnover cycle. Therefore, they induce circulating flows in the solvent around them and behave as oscillating hydrodynamic force dipoles. Because of non-equilibrium fluctuating flows collectively generated by the enzymes, mixing in the solution and diffusion of passive particles within it are expected to get enhanced. Here, we investigate the intensity and statistical properties of such force dipoles in the minimal active dimer model of a mechanochemical enzyme. In the framework of this model, novel estimates for hydrodynamic collective effects in solution and in lipid bilayers under rapid rotational diffusion are derived, and available experimental and computational data is examined.

Towards an analytical description of active microswimmers in clean and in surfactant-covered drops

Geometric confinements are frequently encountered in the biological world and strongly affect the stability, topology, and transport properties of active suspensions in viscous flow. Based on a far-field analytical model, the low-Reynolds-number locomotion of a self-propelled microswimmer moving inside a clean viscous drop or a drop covered with a homogeneously distributed surfactant, is theoretically examined. The interfacial viscous stresses induced by the surfactant are described by the well-established Boussinesq-Scriven constitutive rheological model. Moreover, the active agent is represented by a force dipole and the resulting fluid-mediated hydrodynamic couplings between the swimmer and the confining drop are investigated. We find that the presence of the surfactant significantly alters the dynamics of the encapsulated swimmer by enhancing its reorientation. Exact solutions for the velocity images for the Stokeslet and dipolar flow singularities inside the drop are introduced and expressed in terms of infinite series of harmonic components. Our results offer useful insights into guiding principles for the control of confined active matter systems and support the objective of utilizing synthetic microswimmers to drive drops for targeted drug delivery applications.

Parameters Optimization of Catalytic Tubular Nanomembrane-Based Oxygen Microbubble Generator

A controllable generation of oxygen gas during the decomposition of hydrogen peroxide by the microreactors made of tubular catalytic nanomembranes has recently attracted considerable attention. Catalytic microtubes play simultaneous roles of the oxygen bubble producing microreactors and oxygen bubble-driven micropumps. An autonomous pumping of peroxide fuel takes place through the microtubes by the recoiling microbubbles. Due to optimal reaction–diffusion processes, gas supersaturation, leading to favorable bubble nucleation conditions, strain-engineered catalytic microtubes with longer length produce oxygen microbubbles at concentrations of hydrogen peroxide in approximately ×1000 lower in comparison to shorter tubes. Dynamic regimes of tubular nanomembrane-based oxygen microbubble generators reveal that this depends on microtubes’ aspect ratio, hydrogen peroxide fuel concentration and fuel compositions. Different dynamic regimes exist, which produce specific bubble frequencies, bubble size and various amounts of oxygen. In this study, the rolled-up Ti/Cr/Pd microtubes integrated on silicon substrate are used to study oxygen evolution in different concentrations of hydrogen peroxide and surfactants. Addition of Sodium dodecyl sulfate (SDS) surfactants leads to a decrease of bubble diameter and an increase of frequencies of bubble recoil. Moreover, an increase of temperature (from 10 to 35 °C) leads to higher frequencies of oxygen bubbles and larger total volumes of produced oxygen.

Near-Infrared Light-Steered Graphene Aerogel Micromotor with High Speed and Precise Navigation for Active Transport and Microassembly

Fuel-free light-driven micromotors have attracted increasing attention since the advantages of reversible, noninvasive, and remote maneuver are on demand with excellent spatial and temporal resolution. However, they suffer from a challenging bottleneck of the rather modest motion speed, which hinders their applications, needing to overcome the water flow movement in environmental water. Herein, we demonstrate a near-infrared (NIR) light-steered, precise navigation-controlled micromotor based on a reduced graphene oxide aerogel microsphere (RGOAM), which possesses an isotropic structure and is easily prepared by a one-step electrospray approach other than conventional light-propelled micromotors with the Janus structure. Benefiting from the ultralight weight of the aerogel and lesser fluid resistance on the water surface, the RGOAM motors show a higher motion speed (up to 17.60 mm/s) than that in the published literature, letting it overcome counterflow. Taking advantage of the photothermal conversion capacity of the RGOAM under an asymmetric light field, it is capable of moving both on the water driven by the Marangoni effect and under the water via light-manipulated density change. The motion direction and speed on water as well as the "start/stop" state can be precisely steered by NIR light even in a complicated maze. Due to its strong adsorption and loading capacity, the RGOAM can be applied for active loading-transport-release of dyes on demand as well as micropart assembling and shaping. Our work provides a strategy to achieve high speed, precise navigation control, and functional extensibility simultaneously for micromotors, which may offer considerable promise for the broad biomedical and environmental applications.

The inhibition of concentrated active baths

Passive tracers in the active bath express fascinating behaviors. However, most studies are restricted to dilute active baths. Here, we use 2D simulation of suspensions consisting of active Brownian particles and a passive disk-shaped tracer to investigate tracers' diffusive behaviors in a wide range of volume fractions. Due to the competition between the thermal noise and collisions with active particles, tracers express a first transition from the normal diffusion to the superdiffusion at a short time scale and recur to normal diffusion at a long time scale. At a low volume fraction, infrequent active collisions retard the first transition of smaller tracers. At a high volume fraction, active particles with high activity aggregating around tracers induce a bimodal probability distribution function of tracer displacements during superdiffusion. Considering the enhancement of diffusion, the non-dimensional enhanced diffusivity increases asymptotically with the Peclet number. The asymptotic line gives an upper limit of non-dimensional enhanced diffusivity of tracers. Cases with lower enhanced diffusion have a high volume fraction and a low active velocity that indicates the inhibition of concentrated active baths. With the high negentropic work of these cases, the inhibition is explained as the change of the configuration of active baths for introducing tracers.

Frequency-dependent higher-order Stokes singularities near a planar elastic boundary: Implications for the hydrodynamics of an active microswimmer near an elastic interface

The emerging field of self-driven active particles in fluid environments has recently created significant interest in the biophysics and bioengineering communities owing to their promising future for biomedical and technological applications. These microswimmers move autonomously through aqueous media, where under realistic situations they encounter a plethora of external stimuli and confining surfaces with peculiar elastic properties. Based on a far-field hydrodynamic model, we present an analytical theory to describe the physical interaction and hydrodynamic couplings between a self-propelled active microswimmer and an elastic interface that features resistance toward shear and bending. We model the active agent as a superposition of higher-order Stokes singularities and elucidate the associated translational and rotational velocities induced by the nearby elastic boundary. Our results show that the velocities can be decomposed in shear and bending related contributions which approach the velocities of active agents close to a no-slip rigid wall in the steady limit. The transient dynamics predict that contributions to the velocities of the microswimmer due to bending resistance are generally more pronounced than those due to shear resistance. Bending can enhance (suppress) the velocities resulting from higher-order singularities whereas the shear related contribution decreases (increases) the velocities. Most prominently, we find that near an elastic interface of only energetic resistance toward shear deformation, such as that of an elastic capsule designed for drug delivery, a swimming bacterium undergoes rotation of the same sense as observed near a no-slip wall. In contrast to that, near an interface of only energetic resistance toward bending, such as that of a fluid vesicle or liposome, we find a reversed sense of rotation. Our results provide insight into the control and guidance of artificial and synthetic self-propelling active microswimmers near elastic confinements.

Nonequilibrium probability flux of a thermally driven micromachine

We discuss the nonequilibrium statistical mechanics of a thermally driven micromachine consisting of three spheres and two harmonic springs [Y. Hosaka et al., J. Phys. Soc. Jpn. 86, 113801 (2017)JUPSAU0031-901510.7566/JPSJ.86.113801]. We obtain the nonequilibrium steady state probability distribution function of such a micromachine and calculate its probability flux in the corresponding configuration space. The resulting probability flux can be expressed in terms of a frequency matrix that is used to distinguish between a nonequilibrium steady state and a thermal equilibrium state satisfying detailed balance. The frequency matrix is shown to be proportional to the temperature difference between the spheres. We obtain a linear relation between the eigenvalue of the frequency matrix and the average velocity of a thermally driven micromachine that can undergo a directed motion in a viscous fluid. This relation is consistent with the scallop theorem for a deterministic three-sphere microswimmer.

Harnessing Medium Anisotropy To Control Active Matter

Active matter is a wide class of nonequilibrium systems consisting of interacting self-propelled agents transducing the energy stored in the environment into mechanical motion. Numerous examples range from microscopic cytoskeletal filaments and swimming organisms (bacteria and unicellular algae), synthetic catalytic nanomotors, colloidal self-propelled Janus particles, to macroscopic bird flocks, fish schools, and even human crowds. Active matter demonstrates a remarkable tendency toward self-organization and development of collective states with the long-range spatial order. Furthermore, active materials exhibit properties that are not present in traditional materials like plastics or ceramics: self-repair, shape change, and adaptation. A suspension of microscopic swimmers, such as motile bacteria or self-propelled colloids (active suspensions), is possibly the simplest and the most explored realization of active matter. Recent studies of active suspensions revealed a wealth of unexpected behaviors, from a dramatic reduction of the effective viscosity, enhanced mixing and self-diffusion, rectification of chaotic motion, to artificial rheotaxis (drift against the imposed flow) and cross-stream migration. To date, most of the studies of active matter are performed in isotropic suspending medium, like water with the addition of some "fuel", e.g., nutrient for bacteria or H₂O₂ for catalytic bimetallic AuPt nanorods. A highly structured anisotropic suspending medium represented by lyotropic liquid crystal (water-soluble) opens enormous opportunities to control and manipulate active matter. Liquid crystals exhibit properties intermediate between solid and liquids; they may flow like a liquid but respond to deformations as a solid due to a crystal-like orientation of molecules. Liquid crystals doped by a small amount of active component represent a new class of composite materials (living liquid crystals or LLCs) with unusual mechanical and optical properties. LLCs demonstrate a variety of highly organized dynamic collective states, spontaneous formation of dynamic textures of topological defects (singularities of local molecular orientation), controlled and reconfigurable transport of cargo particles, manipulation of individual trajectories of microswimmers, and many others. Besides insights into fundamental mechanisms governing active materials, living liquid crystals may have intriguing applications, such as the design of new classes of soft adaptive bioinspired materials capable to respond to physical and chemical stimuli, such as light, magnetic, and electric fields, mechanical shear, airborne pollutants, and bacterial toxins. This Account details the most recent developments in the field of LLCs and discusses how the anisotropy of liquid crystals can be harnessed to control and manipulate active materials.