A Calixarene-Based Metal-Organic Framework for Highly Selective NO2 Detection

Recent Advances on Metal Oxide Based Sensors for Environmental Gas Pollutants Detection

Optimizing materials and associated structures for detecting various environmental gas pollutant concentrations has been a major challenge in environmental sensing technology. Semiconducting metal oxides (SMOs) fabricated at the nanoscale are a class of sensor technology in which metallic species are functionalized with various dopants to modify their chemiresistivity and crystalline scaffolding properties. Studies focused on recent advances of gas sensors utilizing metal oxide nanostructures with a special emphasis on the structure-surface property relationships of some typical n-type and p-type SMOs for efficient gas detection are presented. Strategies to enhance the gas sensor performances are also discussed. These oxide material sensors have several advantages such as ease of handling, portability, and doped-based SMO sensing detection ability of environmental gas pollutants at low temperatures. SMO sensors have displayed excellent sensitivity, selectivity, and robustness. In addition, the hybrid SMO sensors showed exceptional selectivity to some CWAs when irradiated with visible light while also displaying high reversibility and humidity independence. Results showed that TiO2 surfaces can sense 50 ppm SO2 in the presence of UV light and under operating temperatures of 298-473 K. Hybrid SMO displayed excellent gas sensing response. For example, a CuO-ZnO nanoparticle network of a 4:1 vol.% CuO/ZnO ratio exhibited responses three times greater than pure CuO sensors and six times greater than pure ZnO sensors toward H2S. This review provides a critical discussion of modified gas pollutant sensing capabilities of metal oxide nanoparticles under ambient conditions, focusing on reported results during the past two decades on gas pollutants sensing.

Spontaneous and Selective Macrocyclization in Nitroaldol Reaction Systems

Through a dynamic polymerization and self-sorting process, a range of lowellane macrocycles have been efficiently generated in nitroaldol systems composed of aromatic dialdehydes and aliphatic or aromatic dinitroalkanes. All identified macrocycles show a composition of two repeating units, resulting in tetra-β-nitroalcohols of different structures. The effects of the building block structure on the macrocyclization process have been demonstrated, and the influence from the solvent has been explored. In general, the formation of the lowellanes was amplified in response to phase-change effects, although solution-phase structures were, in some cases, favored.

Applications of macrocycle-based solid-state host-guest chemistry

Macrocyclic molecules have been used in various fields owing to their guest binding properties. Macrocycle-based host-guest chemistry in solution can allow for precise control of complex formation. Although solution-phase host-guest complexes are easily prepared, their limited stability and processability prevent widespread application. Extending host-guest chemistry from solution to the solid state results in complexes that are generally more robust, enabling easier processing and broadened applications. Macrocyclic compounds in the solid state can encapsulate guests with larger affinities than their soluble counterparts. This is crucial for use in applications such as separation science and devices. In this Review, we summarize recent progress in macrocycle-based solid-state host-guest chemistry and discuss the basic physical chemistry of these complexes. Representative macrocycles and their solid-state complexes are explored, as well as potential applications. Finally, perspectives and challenges are discussed.

Impedance-Based Detection of NO2 Using Ni-MOF-74: Influence of Competitive Gas Adsorption

Chemically robust, low-power sensors are needed for the direct electrical detection of toxic gases. Metal-organic frameworks (MOFs) offer exceptional chemical and structural tunability to meet this challenge, though further understanding is needed regarding how coadsorbed gases influence or interfere with the electrical response. To probe the influence of competitive gases on trace NO2 detection in a simulated flue gas stream, a combined structure-property study integrating synchrotron powder diffraction and pair distribution function analyses was undertaken, to elucidate how structural changes associated with gas binding inside Ni-MOF-74 pores correlate with the electrical response from Ni-MOF-74-based sensors. Data were evaluated for 16 gas combinations of N2, NO2, SO2, CO2, and H2O at 50 °C. Fourier difference maps from a rigid-body Rietveld analysis showed that additional electron density localized around the Ni-MOF-74 lattice correlated with large decreases in Ni-MOF-74 film resistance of up to a factor of 6 × 103, observed only when NO2 was present. These changes in resistance were significantly amplified by the presence of competing gases, except for CO2. Without NO2, H2O rapidly (<120 s) produced small (1-3×) decreases in resistance, though this effect could be differentiated from the slower adsorption of NO2 by the evaluation of the MOF's capacitance. Furthermore, samples exposed to H2O displayed a significant shift in lattice parameters toward a larger lattice and more diffuse charge density in the MOF pore. Evaluating the Ni-MOF-74 impedance in real time, NO2 adsorption was associated with two electrically distinct processes, the faster of which was inhibited by competitive adsorption of CO2. Together, this work points to the unique interaction of NO2 and other specific gases (e.g., H2O, SO2) with the MOF's surface, leading to orders of magnitude decrease in MOF resistance and enhanced NO2 detection. Understanding and leveraging these coadsorbed gases will further improve the gas detection properties of MOF materials.

Recent Breakthroughs in Supercapacitors Boosted by Macrocycles

Supercapacitors are essential for electrochemical energy storage because of their high-power density, good cycle stability, fast charging and discharging rates, and low maintenance cost. Macrocycles, including cucurbiturils, calixarene, and cyclodextrins, are cage-like organic compounds (with a nanocavity that contains O and N heteroatoms) with unique potential in supercapacitors. Here, we review the applications of macrocycles in supercapacitor systems, and we illustrate the merits of organic macrocycles in electrodes and electrolytes for improving the electrochemical double-layer capacitors and pseudocapacitance via supramolecular strategies. Then, the observed relationships between electrochemical performance and macrocyclic structures are introduced. This comprehensive review describes recent progress on macrocycle-block supercapacitors for researchers.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Moisture-Insensitive and Highly Selective Detection of NO2 by Ion-in-Conjugation Covalent Organic Frameworks

As a common toxic gas, nitrogen dioxide (NO₂) seriously threatens the environment and human respiratory system even at part per billion (ppb) level. Covalent organic frameworks (COFs) have gained widespread attention in sensing applications because of the benefits of designability, environmental stability, and a large number of active sites. However, the competitive adsorption of water molecules and the target gas molecules at room temperature as well as the weak interaction between COFs and gas molecules hinder their practical applications. Here, we introduce ion-in-conjugation (IIC) into a covalent organic framework (COF) by preparing a condensate of squaraine (SA) with 1,3,5-tris(4-aminophenyl)benzene (TAPB) to form a mesoporous macrocyclic material (SA-TAPB). Layers of SA-TAPB, drop cast onto interdigitated Ag-Pd alloy electrodes, show a statistically significant conductivity response to NO₂ at concentrations as low as 30 ppb and a theoretical detection limit of 10.9 ppb. The sensor displays a lower sensitivity to variations in humidity when operated at 80 °C compared to room temperature. The density functional theory (DFT) calculations indicated that the main adsorption site of NO₂ is dual hydrogen bonds formed between two amide hydrogen atoms of SA-TAPB and the NO₂ molecule. Gas adsorption experiments revealed that SA-TAPB has the largest adsorption capacity of NO₂ versus other interference gases, which were responsible for the excellent selectivity toward NO₂.

Anchoring Platinum Clusters onto Oxygen Vacancy-Modified In2O3 for Ultraefficient, Low-Temperature, Highly Sensitive, and Stable Detection of Formaldehyde

To avoid carcinogenicity, formaldehyde gas, currently being only detected at higher operating temperatures, should be selectively detected in time with ppb concentration sensitivity in a room-temperature indoor environment. This is achieved in this work through introducing oxygen vacancies and Pt clusters on the surface of In₂O₃ to reduce the optimal operating temperature from 120 to 40 °C. Previous studies have shown that only water participates in the competitive adsorption on the sensor surface. Here, we experimentally confirm that the adsorbed water on the fabricated sensor surface is consumed via a chemical reaction due to the strong interaction between the oxygen vacancies and Pt clusters. Therefore, the long-term stability of formaldehyde gas detection is improved. The results of theoretical calculations in this work reveal that the excellent formaldehyde gas detection of Pt/In₂O_3-x originates from the electron enrichment due to the surface oxygen vacancies and the molecular adsorption and activation ability of Pt clusters on the surface. The developed Pt/In₂O_3-x sensor has potential use in the ultraefficient, low-temperature, highly sensitive, and stable detection of indoor formaldehyde at an operating temperature as low as room temperature.

Metal-Organic Frameworks for NOx Adsorption and Their Applications in Separation, Sensing, Catalysis, and Biology

Nitrogen oxide (NO_x ) is a family of poisonous and highly reactive gases formed when fuel is burned at high temperatures during anthropogenic behavior. It is a strong oxidizing agent that significantly contributes to the ozone and smog in the atmosphere. Thus, NO_x removal is important for the ecological environment upon which the civilization depends. In recent decades, metal-organic frameworks (MOFs) have been regarded as ideal candidates to address these issues because they form a reticular structure between proper inorganic and organic constituents with ultrahigh porosity and high internal surface area. These characteristics render them chemically adaptable for NO_x adsorption, separation, sensing, and catalysis. In additional, MOFs enable potential nitric oxide (NO) delivery for the signaling of molecular NO in the human body. Herein, the different advantages of MOFs for coping with current environmental burdens and improving the habitable environment of humans on the basis of NO_x adsorption are reviewed.

Recent Progress in Metal-Organic Framework Based Fluorescent Sensors for Hazardous Materials Detection

Population growth and industrial development have exacerbated environmental pollution of both land and aquatic environments with toxic and harmful materials. Luminescence-based chemical sensors crafted for specific hazardous substances operate on host-guest interactions, leading to the detection of target molecules down to the nanomolar range. Particularly, the luminescence-based sensors constructed on the basis of metal-organic frameworks (MOFs) are of increasing interest, as they can not only compensate for the shortcomings of traditional detection techniques, but also can provide more sensitive detection for analytes. Recent years have seen MOFs-based fluorescent sensors show outstanding advantages in the field of hazardous substance identification and detection. Here, we critically discuss the application of MOFs for the detection of a broad scope of hazardous substances, including hazardous gases, heavy metal ions, radioactive ions, antibiotics, pesticides, nitro-explosives, and some harmful solvents as well as luminous and sensing mechanisms of MOF-based fluorescent sensors. The outlook and several crucial issues of this area are also discussed, with the expectation that it may help arouse widespread attention on exploring fluorescent MOFs (LMOFs) in potential sensing applications.

A versatile enrichment of functionalized calixarene as a facile sensor for amino acids

Amino acids have become the most important part of the human biological system due to their roles in the living processes. Role of amino acids stretches beyond their traditional role as a building block for proteins, deficiency of the same could lead to decreased immunity, digestive problems, depression, fertility issues, lower mental alertness, slowed growth in children, and many other health issues. The acute detection of amino acids is necessary to determine the human health domain. Here in this review, we summarize and study the calixarenes as a complex detailed being of an immeasurable value and its utilization for the amino acids' detection. The key factors responsible such as noncovalent forces, LOD and supramolecular chemistry of calixarenes with amino acids are described well. This study presents the most recent efforts made for the development of potential and highly efficient calixarene based sensors for the detection of amino acids.

Templated synthesis of zirconium(IV)-based metal-organic layers (MOLs) with accessible chelating sites

Metal-organic layers (MOLs) are of great interest in heterogeneous catalysis, particularly materials that can accommodate extraneous metal centres. Here, we demonstrate a two-step preorganisation/delamination synthetic strategy using CuI as a template to prepare Zr-based MOLs with accessible 'syn' bis-pyrazolyl chelating sites (named UAM-2·ns) that are poised for quantitative post-synthetic metalation with late transition metals.

Structural Regulation and Light Hydrocarbon Adsorption/Separation of Three Zirconium-Organic Frameworks Based on Different V-Shaped Ligands

On the basis of different V-shaped ligands, three zirconium-organic frameworks (JLU-Liu45, Zr-SDBA, and Zr-OBBA) have been successfully constructed. By regulating spatial configuration and functional groups of organic ligands, these as-synthesized Zr-MOFs (MOF = metal-organic framework) display distinct structures and different light hydrocarbon adsorption/separation capabilities. JLU-Liu45, with a double-walled interpenetrated 3D primitive cubic (pcu) framework, exhibits good gas-adsorption capacity but not prominent selective separation ability. Through regulating sizes and torsion angles of the organic ligands, Zr-SDBA possesses a 2D square lattice (sql) network, while Zr-OBBA displays a non-interpenetrated 3D pcu framework. Furthermore, by regulating functional groups on the ligands, Zr-SDBA shows prominent C₂H₂ uptake (101.2 cm³·g^-1) and the best C₂H₂/CH₄ selectivity (230.5, 1:1) among the three Zr-MOFs, and Zr-OBBA shows a significant C₃H₈/CH₄ selectivity (105.6, 1:1). This work demonstrates the feasibility of structural regulation for MOF materials in the light hydrocarbon adsorption/separation field.

Atomically dispersed Pb ionic sites in PbCdSe quantum dot gels enhance room-temperature NO2 sensing

Atmospheric NO2 is of great concern due to its adverse effects on human health and the environment, motivating research on NO2 detection and remediation. Existing low-cost room-temperature NO2 sensors often suffer from low sensitivity at the ppb level or long recovery times, reflecting the trade-off between sensor response and recovery time. Here, we report an atomically dispersed metal ion strategy to address it. We discover that bimetallic PbCdSe quantum dot (QD) gels containing atomically dispersed Pb ionic sites achieve the optimal combination of strong sensor response and fast recovery, leading to a high-performance room-temperature p-type semiconductor NO2 sensor as characterized by a combination of ultra-low limit of detection, high sensitivity and stability, fast response and recovery. With the help of theoretical calculations, we reveal the high performance of the PbCdSe QD gel arises from the unique tuning effects of Pb ionic sites on NO2 binding at their neighboring Cd sites.

Self-Assembly of Polyoxometalate-Resorcin[4]arene-Based Inorganic-Organic Complexes: Metal Ion Effects on the Electrochemical Performance of Lithium Ion Batteries

With their adjustable structures and diverse functions, polyoxometalate (POM)-resorcin[4]arene-based inorganic-organic complexes are a kind of potential multifunctional material. They have potential applications for lithium ion batteries (LIBs). However, the relationship between different coordinated metal ions and electrochemical performance has rarely been investigated. Here, three functionalized POM-resorcin[4]arene-based inorganic-organic materials, [Co₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅4.5 H₂ O (1), [Ni₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅4 EtOH⋅13 H₂ O (2), and [Zn₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅2 H₂ O (3), have been synthesized. Furthermore, to enhance the conductivities of these compounds, 1-3 were doped with reduced graphene oxide (RGO) to give composites 1@RGO-3@RGO, respectively. As anode materials for LIBs, 1@RGO-3@RGO can deliver very high discharge capacities (1445.9, 1285.0 and 1095.3 mAh g^-1 , respectively) in the initial run, and show discharge capacities of 898, 665 and 651 mAh g^-1 , respectively, at a current density of 0.1 A g^-1 over 100 runs. More importantly, the discharge capacities of 319, 283 and 329 mAh g^-1 were maintained for 1@RGO-3@RGO even after 400 cycles at large current density (1 A g^-1 ).

Continuous MOF Membrane-Based Sensors via Functionalization of Interdigitated Electrodes

Three M-MOF-74 (M = Co, Mg, Ni) metal-organic framework (MOF) thin film membranes have been synthesized through a sensor functionalization method for the direct electrical detection of NO₂. The two-step surface functionalization procedure on the glass/Pt interdigitated electrodes resulted in a terminal carboxylate group, with both steps confirmed through infrared spectroscopic analysis. This surface functionalization allowed the MOF materials to grow largely in a uniform manner over the surface of the electrode forming a thin film membrane over the Pt sensing electrodes. The growth of each membrane was confirmed through scanning electron microscopy (SEM) and X-ray diffraction analysis. The Ni and Mg MOFs grew as a continuous but non-defect free membrane with overlapping polycrystallites across the glass surface, whereas the Co-MOF-74 grew discontinuously. To demonstrate the use of these MOF membranes as an NO₂ gas sensor, Ni-MOF-74 was chosen as it was consistently fabricated as the best thin and homogenous membrane, as confirmed by SEM. The membrane was exposed to 5 ppm NO₂ and the impedance magnitude was observed to decrease 123× in 4 h, with a larger change in impedance and a faster response than the bulk material. Importantly, the use of these membranes as a sensor for NO₂ does not require them to be defect-free, but solely continuous and overlapping growth.

Coordination polymers with embedded recognition sites: lessons from cyclotriveratrylene-type ligands

Coordination polymers with molecular recognition sites are assembled using cyclotriveratrylene ligands. Many show differential guest-spaces with host and lattice sites available, however common host–guest and self-inclusion motifs can block sites.

3D Hydrangea Macrophylla-like Nickel-Vanadium Metal-Organic Frameworks Formed by Self-Assembly of Ultrathin 2D Nanosheets for Overall Water Splitting

The development of highly efficient and low-cost bifunctional noble metal-free electrocatalysts for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is an effective strategy for improving efficiency. Herein, novel three-dimensional (3D) bimetallic metal-organic frameworks containing Ni and V with adjustable stoichiometry were synthesized on nickel foam successfully. Notably, Ni2V-MOFs@NF only require rather low overpotentials of 244 and 89 mV for the OER and HER, respectively, and expedites overall water splitting with 1.55 V at 10 mA cm^-2 with robust durability during the 80 h test. The high efficiency of the novel obtained electrocatalysts should be attributed to the particular morphological design of the two-dimensional (2D) ultrathin nanosheets self-assembling into a 3D nanoflower and the electronic structure regulation resulting from the synergetic interaction between nickel and vanadium. Subsequent theoretical calculations reveal the following conclusions: (I) the exceptional electronic conductivity of Ni2V-MOFs shows enhanced optimization as a result of electronic structure reconstruction, (II) the energy barrier reduction of the rate-limiting step is responsible for the enhanced dynamics of Ni2V-MOFs for the OER, and (III) the facilitation of the adsorption of H⁺ and H₂O plays a key role in progressing the HER catalytic activity of Ni2V-MOFs.

Destruction of Metal-Organic Frameworks: Positive and Negative Aspects of Stability and Lability

Metal-organic frameworks (MOFs), constructed from organic linkers and inorganic building blocks, are well-known for their high crystallinity, high surface areas, and high component tunability. The stability of MOFs is a key prerequisite for their potential practical applications in areas including storage, separation, catalysis, and biomedicine since it is essential to guarantee the framework integrity during utilization. However, MOFs are prone to destruction under external stimuli, considerably hampering their commercialization. In this Review, we provide an overview of the situations where MOFs undergo destruction due to external stimuli such as chemical, thermal, photolytic, radiolytic, electronic, and mechanical factors and offer guidelines to avoid unwanted degradation happened to the framework. Furthermore, we discuss possible destruction mechanisms and their varying derived products. In particular, we highlight cases that utilize MOF instability to fabricate varying materials including hierarchically porous MOFs, monolayer MOF nanosheets, amorphous MOF liquids and glasses, polymers, metal nanoparticles, metal carbide nanoparticles, and carbon materials. Finally, we provide a perspective on the utilization of MOF destruction to develop advanced materials with a superior hierarchy for various applications.

Transition-Metal-Containing Porphyrin Metal-Organic Frameworks as π-Backbonding Adsorbents for NO2 Removal

Mitigating ambient nitrogen dioxide (NO₂ ) pollution via selective adsorption on porous materials is a promising approach to tackle such an increasingly pressing environmental health issue. However, very few porous adsorbents have sufficiently high NO₂ adsorption capacity and good regenerability simultaneously. Here we attempt to address this challenge by developing π-backbonding adsorbents in the transition metal (TM) incorporated porphyrin metal-organic frameworks (PMOFs). Breakthrough experiments show that PMOFs with inserted TMs achieve appreciable NO₂ capacity and good regenerability. Combined in situ DRIFTS, synchrotron powder XRD, and DFT calculations reveal the adsorption mechanism: NO₂ partially transforms to N₂ O₄ and interacts with transition metal via π-backbonding and Al-node via hydrogen bonding. This work affords new insights for designing next-generation adsorbents for ambient NO₂ removal and presents PMOFs as a platform to tailor π-backbonding adsorbents.

Overview of the Synthesis and Structure of Calix[n]quinones (n=4, 6, 8)

Calix[n]quinones, a class of cyclic oligomers composed of p-benzoquinone structures connected by methylene, have multi-conjugated carbonyl structures and adjustable cavities, which make their synthesis extremely attractive. In this minireview, synthetic methods of calix[n]quinones and recent synthetic experience of our group are summarized. The merits and demerits of various synthetic methods are briefly reviewed as well. When synthesizing calix[n]quinone (n≥6) with a larger ring, the reduction-oxidation method is considered to be the most recommended.

Topology-Based Functionalization of Robust Chiral Zr-Based Metal-Organic Frameworks for Catalytic Enantioselective Hydrogenation

The design and development of robust and porous supported catalysts with high activity and selectivity is extremely significant but very challenging for eco-friendly synthesis of fine chemicals and pharmaceuticals. We report here the design and synthesis of highly stable chiral Zr(IV)-based MOFs with different topologies to support Ir complexes and demonstrate their network structures-dependent asymmetric catalytic performance. Guided by the modulated synthesis and isoreticular expansion strategy, five chiral Zr-MOFs with a flu or ith topology are constructed from enantiopure 1,1'-biphenol-derived tetracarboxylate linkers and Zr₆, Zr₉, or Zr₁₂ clusters. The obtained MOFs all show high chemical stability in boiling water, strongly acidic, and weakly basic aqueous solutions. The two flu MOFs featuring the dihydroxyl groups of biphenol in open and large cages, after sequential postsynthetic modification with P(NMe₂)₃ and [Ir(COD)Cl]₂, can be highly efficient and recyclable heterogeneous catalysts for hydrogenation of α-dehydroamino acid esters with up to 98% ee, whereas the three ith MOFs featuring the dihydroxyl groups in small cages cannot be installed with P(NMe₂)₃ to support the Ir complex. Incorporation of Ir-phosphorus catalysts into Zr-MOFs leads to great enhancement of their chemical stability, durability, and even stereoselectivity. This work therefore not only advances Zr-MOFs as stable supports for labile metal catalysts for heterogeneous asymmetric catalysis but also provides a new insight into how highly active chiral centers can result due to the framework topology.

Inside/Outside: Post-Synthetic Modification of the Zr-Benzophenonedicarboxylate Metal-Organic Framework

The Zr‐based metal–organic framework, Zr‐bzpdc‐MOF, contains the photoreactive linker molecule benzophenone‐4,4′‐dicarboxylate (bzpdc) which imparts the possibility for photochemical post‐synthetic modification. Upon irradiation with UV light, the keto group of the benzophenone moiety will react with nearly every C−H bond‐containing molecule. Within this paper, we further explore the photochemical reactivity of the Zr‐bzpdc‐MOF, especially with regard to which restrictions govern internal versus external reactions. We show that apart from reactions with C−H bond‐containing molecules, the MOF reacts also with water. By studying the reactivity versus linear alcohols we find a clear delineation in that shorter alcohol molecules (up to butanol as a borderline case) react with photoexcited keto groups throughout the whole crystals whereas longer ones react only with surface‐standing keto groups. In addition, we show that with the alkanes n‐butane to n‐octane, the reaction is restricted to the outer surface. We hypothesize that the reactivity of the Zr‐bzpdc‐MOF versus different reagents depends on the accessibility of the pore system which in turn depends mainly on the size of the reagents and on their polarity. The possibility to direct the post‐synthetic modification of the Zr‐bzpdc‐MOF (selective modification of the whole pore system versus surface modification) gives additional degrees of freedom in the design of this metal–organic framework for shaping and for applications.

Solvent-assisted linker exchange as a tool for the design of mixed-linker MIL-140D structured MOFs for highly selective detection of gaseous H2S

Solvent-assisted linker exchange was used as tool to modify a MIL-140D-sdc (sdc = 4,4′-stilbenedicarboxylate) MOF with azostilbene dicarboxylic acid. The azo groups can act as coordination sites for copper ions and allow the use of this material as sensor for gaseous H₂S.

Functional metal–organic frameworks as effective sensors of gases and volatile compounds

This review summarizes the recent advances of metal organic framework (MOF) based sensing of gases and volatile compounds.

Highly efficient synergistic CO2 conversion with epoxide using copper polyhedron-based MOFs with Lewis acid and base sites

The catalytic performances and effect of LASs and LBSs of four isomorphous Cu-PMOFs in CO₂ cycloaddition reaction were systematically studied. JLU-Liu21 exhibited significant catalytic efficiency, remarkable recyclability and catalytic stability.

Highly Stable Copper(I)-Thiacalix[4]arene-Based Frameworks for Highly Efficient Catalysis of Click Reactions in Water

Environmentally friendly metal-organic frameworks (MOFs) have gained considerable attention for their potential use as heterogeneous catalysts. Herein, two Cu^I -based MOFs, namely, [Cu₄ Cl₄ L]⋅CH₃ OH⋅1.5 H₂ O (1-Cl) and [Cu₄ Br₄ L]⋅DMF⋅0.5 H₂ O (1-Br), were assembled with new functionalized thiacalix[4]arenes (L) and halogen anions X^- (X=Cl and Br) under solvothermal conditions. Remarkably, catalysts 1-Cl and 1-Br exhibit great stability in aqueous solutions over a wide pH range. Significantly, MOFs 1-Cl and 1-Br, as recycled heterogeneous catalysts, are capable of highly efficient catalysis for click reactions in water. The MOF structures, especially the exposed active Cu^I sites and 1D channels, play a key role in the improved catalytic activities. In particular, their catalytic activities in water are greatly superior to those in organic solvents or even in mixed solvents. This work proposes an attractive route for the design and self-assembly of environmentally friendly MOFs with high catalytic activity and reusability in water.

CO2 Capture on Functionalized Calixarenes: A Computational Study

High carbon emissions have shown a strong correlation with rising global temperatures as the world's climate undergoes a dramatic shift. Work to mitigate the potential damage using materials such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and polymer membranes (PMs) has proven successful in small-scale approaches; however, research is still being performed to enhance the capabilities of these materials for use at an industrial scale. One strategy for increasing performance is to embed these materials with CO₂-philic molecules, which enhance selective binding over other gases. Calixarenes are promising candidates due to their large chalice shape, which allows for the possibility to bind multiple CO₂ molecules per site. In this study, a dataset including 40 functionalized calixarene structures and one unfunctionalized (bare) calixarene was constructed with an automated, high-throughput structure generation through directed modifications to a molecular scaffold. A conformational search based on molecular mechanics allowed the faster determination of optimal binding energies for a vast array of chemical functional groups with less computational effort. Density functional theory and symmetry-adapted perturbation theory calculations were performed for the exploration of their interactions with CO₂. Our work has identified new organic cages with increased CO₂-philicity. In four cases, CO₂ binding is stronger than 9.0 kcal/mol and very close to the targets set by previous studies. The nature of the noncovalent interactions for these cases is analyzed and discussed. Conclusions from this study can aid synthetic efforts for the next generation of functional materials.

Diamondoid Nanostructures as sp3 -Carbon-Based Gas Sensors

Diamondoids, sp³ -hybridized nanometer-sized diamond-like hydrocarbons (nanodiamonds), difunctionalized with hydroxy and primary phosphine oxide groups, enable the assembly of the first sp³ -C-based chemical sensors by vapor deposition. Both pristine nanodiamonds and palladium nanolayered composites can be used to detect toxic NO₂ and NH₃ gases. This carbon-based gas sensor technology allows reversible NO₂ detection down to 50 ppb and NH₃ detection at 25-100 ppm concentration with fast response and recovery processes at 100 °C. Reversible gas adsorption and detection is compatible with 50 % humidity conditions. Semiconducting p-type sensing properties are achieved from devices based on primary phosphine-diamantanol, in which high specific area (ca. 140 m²  g^-1 ) and channel nanoporosity derive from H-bonding.

Selective decontamination of the reactive air pollutant nitrous acid via node-linker cooperativity in a metal-organic framework

The environmental pollutant nitrous acid is rapidly and selectively sorbed and converted to benign products in the metal–organic framework UiO-66-NH₂.

Nitrous acid (HONO) is a reservoir of NO_x and an emerging pollutant having direct impacts on air quality, both in- and outdoors, as well as on human health. In this work, the amine-functionalized metal–organic framework (MOF), UiO-66-NH₂, was investigated due to its potential to selectively decontaminate nitrous acid at environmentally relevant concentrations. UiO-66-NH₂ proved to be effective in the removal of nitrous acid from a continuous gaseous stream. This is observed via the formation of an aryl diazonium salt that subsequently converts to a phenol with a concomitant release of nitrogen gas. This process is preceded via the formation of the nitrosonium cation (likely protonation from an acidic proton on the node). Thus, UiO-66-NH₂ is capable of selectively converting the pollutant nitrous acid to benign products.

A fluorescent pillarene coordination polymer

A fluorescent pillarene-based coordination polymer was constructed from dicarboxylic acid-functionalized copillar[5]arene and Cr³⁺, for sensing of Fe³⁺, acetone, and nitrophenols.

Separation performance of p-tert-butyl(tetradecyloxy)calix[6]arene as a stationary phase for capillary gas chromatography

This work presents the first example of the utilization of p-tert-butyl(tetradecyloxy)calix[6]arene (C6A-C10) as a stationary phase for capillary gas chromatographic (GC) separation.