RNA Structure and Cellular Applications of Fluorescent Light-Up Aptamers

Biophysical characterization and design of a minimal version of the Hoechst RNA aptamer

RNA aptamers are oligonucleotides, selected through Systematic Evolution of Ligands by EXponential Enrichment (SELEX), that can bind to specific target molecules with high affinity. One such molecule is the RNA aptamer that binds to a blue-fluorescent Hoechst dye that was modified with bulky t-Bu groups to prevent non-specific binding to DNA. This aptamer has potential for biosensor applications; however, limited information is available regarding its conformation, molecular interactions with the ligand, and binding mechanism. The study presented here aims to biophysically characterize the Hoechst RNA aptamer when complexed with the t-Bu Hoechst dye and to further optimize the RNA sequence by designing and synthesizing new sequence variants. Each variant aptamer-t-Bu Hoechst complex was evaluated through a combination of fluorescence emission, native polyacrylamide gel electrophoresis, fluorescence titration, and isothermal titration calorimetry experiments. The results were used to design a minimal version of the aptamer consisting of only 21 nucleotides. The performed study also describes a more efficient method for synthesizing the t-Bu Hoechst dye derivative. Understanding the biophysical properties of the t-Bu Hoechst dye-RNA complex lays the foundation for nuclear magnetic resonance spectroscopy studies and its potential development as a building block for an aptamer-based biosensor that can be used in medical, environmental or laboratory settings.

A new insight into the early detection of HER2 protein in breast cancer patients with a focus on electrochemical biosensors approaches: A review

Breast cancer is one of the leading causes of death in women and is a prevalent kind of cancerous growth, representing a substantial risk to women's health. Early detection of breast cancer is essential for effective treatment and improved survival rates. Biomarkers, active substances that signal the existence and advancement of a tumor, play a significant role in the early detection of breast cancer. Hence, accurate identification of biomarkers for tumors is crucial for diagnosing and treating breast cancer. However, the primary diagnostic methods used for the detection of breast cancer require specific equipment, skilled professionals, and specialized analysis, leading to elevated detection expenses. Regarding this obstacle, recent studies emphasize electrochemical biosensors as more advanced and sensitive detection tools compared to traditional methods. Electrochemical biosensors are employed to identify biomarkers that act as unique indicators for the onset, recurrence, and monitoring of therapeutic interventions for breast cancer. This study aims to provide a summary of the electrochemical biosensors that have been employed for the detection of breast cancer at an early stage over the past decade. Initially, the text provides concise information about breast cancer and tumor biomarkers. Subsequently, an in-depth analysis is conducted to systematically review the progress of electrochemical biosensors developed for the stable, specific, and sensitive identification of biomarkers associated with breast cancer. Particular emphasis was given to crucial clinical biomarkers, specifically the human epidermal growth factor receptor-2 (HER2). The analysis then explores the limitations and challenges inherent in the design of effective biosensors for diagnosing and treating breast cancer. Ultimately, we provided an overview of future research directions and concluded by outlining the advantages of electrochemical biosensor approaches.

Nucleic Acid-Binding Dyes as Versatile Photocatalysts for Atom-Transfer Radical Polymerization

Nucleic acid-binding dyes (NuABDs) are fluorogenic probes that light up after binding to nucleic acids. Taking advantage of their fluorogenicity, NuABDs have been widely utilized in the fields of nanotechnology and biotechnology for diagnostic and analytical applications. We demonstrate the potential of NuABDs together with an appropriate nucleic acid scaffold as an intriguing photocatalyst for precisely controlled atom-transfer radical polymerization (ATRP). Additionally, we systematically investigated the thermodynamic and electrochemical properties of the dyes, providing insights into the mechanism that drives the photopolymerization. The versatility of the NuABD-based platform was also demonstrated through successful polymerizations using several NuABDs in conjunction with diverse nucleic acid scaffolds, such as G-quadruplex DNA or DNA nanoflowers. This study not only extends the horizons of controlled photopolymerization but also broadens opportunities for nucleic acid-based materials and technologies, including nucleic acid-polymer biohybrids and stimuli-responsive ATRP platforms.

In Vivo Imaging MicroRNA with Bright Fluorescent RNA Aptamer Through Target-Mediated Entropy-Driven Toehold Exchange

MicroRNAs (miRNAs) play vital roles in biological activities, but their in vivo imaging is still challenging due to the low abundance and the lack of efficient fluorescent tools. RNA aptamers with high affinity and low background emerge for bioimaging yet suffering from low brightness. We introduce a rational design based on target-mediated entropy-driven toehold exchange (EDTE) to induce the release of RNA aptamer and subsequently light up corresponding fluorophore, which achieves selective imaging of miRNAs with good stability in both living cells and tumor-bearing mouse. Through tailoring recognition unit of the EDTE probes, highly sensitive imaging of different miRNAs including miRNA-125b and miRNA-21 is achieved, confirming its universal bioimaging applications. In comparison with the reported "one-to-one" model, the EDTE strategy shows a remarkable 4.6-time improvement in signal/noise ratio for intracellular imaging of the same miRNA. Particularly, it realizes sensitive imaging of miRNA in vivo, providing a promising tool in investigating functions and interactions of disease-associated miRNAs.

Multidimensional Applications and Challenges of Riboswitches in Biosensing and Biotherapy

Riboswitches have received significant attention over the last two decades for their multiple functionalities and great potential for applications in various fields. This article highlights and reviews the recent advances in biosensing and biotherapy. These fields involve a wide range of applications, such as food safety detection, environmental monitoring, metabolic engineering, live cell imaging, wearable biosensors, antibacterial drug targets, and gene therapy. The discovery, origin, and optimization of riboswitches are summarized to help readers better understand their multidimensional applications. Finally, this review discusses the multidimensional challenges and development of riboswitches in order to further expand their potential for novel applications.

Conformational preferences of modified nucleobases in RNA aptamers and their effect on Förster resonant energy transfer

Förster resonant energy transfer (FRET) can be utilized in the study of tertiary structures of RNA aptamers, which bind specific fluorophoric ligands to form a fluorogenic aptamer complex. By introducing the emissive nucleobase analog 4-cyanoindole into the fluorogenic Chili RNA aptamer a FRET pair was established. The interpretation of studies aiming to investigate those tertiary structures using FRET, however, relies on prior knowledge about conformational properties of the nucleobase, which govern exciton transfer capabilities. Herein we employed classical molecular dynamics combined with Förster exciton theory to elucidate the preferred orientation relative to proximate bases and the influence on exciton transfer efficiency in multiple substitution sites. We did this by comparing the chromophoric distances emergent from MD simulations with experimental FRET data based on structural data of the native aptamer. We present the outlined methodology as a means to reliably evaluate future nucleobase analogue candidates in terms of their structural behavior and emergent exciton transfer properties as exemplified in the study of the preferred orientation of 4-cyanoindole in the Chili RNA aptamer.

Evaluating DFHBI-Responsive RNA Light-Up Aptamers as Fluorescent Reporters for Gene Expression

Protein-based fluorescent reporters have been widely used to characterize and localize biological processes in living cells. However, these reporters may have certain drawbacks for some applications, such as transcription-based studies or biological interactions with fast dynamics. In this context, RNA nanotechnology has emerged as a promising alternative, suggesting the use of functional RNA molecules as transcriptional fluorescent reporters. RNA-based aptamers can bind to nonfluorescent small molecules to activate their fluorescence. However, their performance as reporters of gene expression in living cells has not been fully characterized, unlike protein-based reporters. Here, we investigate the performance of three RNA light-up aptamers─F30-2xdBroccoli, tRNA-Spinach, and Tornado Broccoli─as fluorescent reporters for gene expression in Escherichia coli and compare them to a protein reporter. We examine the activation range and effect on the cell growth of RNA light-up aptamers in time-course experiments and demonstrate that these aptamers are suitable transcriptional reporters over time. Using flow cytometry, we compare the variability at the single-cell level caused by the RNA fluorescent reporters and protein-based reporters. We found that the expression of RNA light-up aptamers produced higher variability in a population than that of their protein counterpart. Finally, we compare the dynamical behavior of these RNA light-up aptamers and protein-based reporters. We observed that RNA light-up aptamers might offer faster dynamics compared to a fluorescent protein in E. coli. The implementation of these transcriptional reporters may facilitate transcription-based studies, gain further insights into transcriptional processes, and expand the implementation of RNA-based circuits in bacterial cells.

A Small-Molecule Approach to Bypass In Vitro Selection of New Aptamers: Designer Pre-Ligands Turn Baby Spinach into Sensors for Reactive Inorganic Targets

Fluorescent light-up aptamer (FLAP) systems are promising biosensing platforms that can be genetically encoded. Here, we describe how a single FLAP that works with specific organic ligands can detect multiple, structurally unique, non-fluorogenic, and reactive inorganic targets. We developed 4-O-functionalized benzylidene imidazolinones as pre-ligands with suppressed fluorescent binding interactions with the RNA aptamer Baby Spinach. Inorganic targets, hydrogen sulfide (H2S) or hydrogen peroxide (H2O2), can specifically convert these pre-ligands into the native benzylidene imidazolinones, and thus be detected with Baby Spinach. Adaptation of this approach to live cells opened a new opportunity for top-down construction of whole-cell sensors: Escherichia coli transformed with a Baby Spinach-encoding plasmid and incubated with pre-ligands generated fluorescence in response to exogenous H2S or H2O2. Our approach eliminates the requirement of in vitro selection of a new aptamer sequence for molecular target detection, allows for the detection of short-lived targets, thereby advancing FLAP systems beyond their current capabilities. Leveraging the functional group reactivity of small molecules can lead to cell-based sensors for inorganic molecular targets, exploiting a new synergism between synthetic organic chemistry and synthetic biology.

High-throughput, fluorescent-aptamer-based measurements of steady-state transcription rates for the Mycobacterium tuberculosis RNA polymerase

The first step in gene expression is the transcription of DNA sequences into RNA. Regulation at the level of transcription leads to changes in steady-state concentrations of RNA transcripts, affecting the flux of downstream functions and ultimately cellular phenotypes. Changes in transcript levels are routinely followed in cellular contexts via genome-wide sequencing techniques. However, in vitro mechanistic studies of transcription have lagged with respect to throughput. Here, we describe the use of a real-time, fluorescent-aptamer-based method to quantitate steady-state transcription rates of the Mycobacterium tuberculosis RNA polymerase. We present clear controls to show that the assay specifically reports on promoter-dependent, full-length RNA transcription rates that are in good agreement with the kinetics determined by gel-resolved, α-32P NTP incorporation experiments. We illustrate how the time-dependent changes in fluorescence can be used to measure regulatory effects of nucleotide concentrations and identity, RNAP and DNA concentrations, transcription factors, and antibiotics. Our data showcase the ability to easily perform hundreds of parallel steady-state measurements across varying conditions with high precision and reproducibility to facilitate the study of the molecular mechanisms of bacterial transcription.

Advanced Self-Powered Biofuel Cells with Capacitor and Nanogenerator for Biomarker Sensing

Self-powered biofuel cells (BFCs) have evolved for highly sensitive detection of biomarkers such as noncodon micro ribonucleic acids (miRNAs) in the presence of interfering substrates. Self-charging supercapacitive BFCs for in vivo and in vitro cellular microenvironments represent the most prevalent sensing mechanism for diagnosis. Therefore, self-powered biosensing (SPB) with a capacitor and contact separation with a triboelectric nanogenerator (TENG) offers electrochemical and colorimetric dual-mode detection via improved electrical signal intensity. In this review, we discuss three major components: stretchable self-powered BFC design, miRNA sensing, and impedance spectroscopy. A specific focus is given to 1) assembling of sensors for biomarkers, 2) electrical output signal intensification, and 3) role of supercapacitors and nanogenerators in SPBs. We outline the key features of stretchable SPBs and the sequence of miRNA sensing by SPBs. We have emphasized the need of a supercapacitor and nanogenerator for SPBs in the context of advanced assembly of the sensing unit. Finally, we outline the role of impedance spectroscopy in the detection and estimation of biomarkers. We highlight key challenges in SPBs for biomarker sensing, which needs improved sensing accuracy, integration strategies of electrochemical biosensing for in vitro and in vivo microenvironments, and the impact of miRNA sensing on cancer diagnostics. This article attempts a specific focus on the accuracy and limitations of sensing unit for miRNA biomarkers and associated tool for boosting electrical signal intensity for a potential big step further.

Switchable Fluorescent Light-Up Aptamers Based on Riboswitch Architectures

Fluorescent light-up RNA aptamers (FLAPs) such as Spinach or Mango can bind small fluorogens and activate their fluorescence. Here, we adopt a switching mechanism otherwise found in riboswitches and use it to engineer switchable FLAPs that can be activated or repressed by trigger oligonucleotides or small metabolites. The fluorophore binding pocket of the FLAPs comprises guanine (G) quadruplexes, whose critical nucleotides can be sequestered by corresponding anti-FLAP sequences, leading to an inactive conformation and thus preventing association with the fluorophore. We modified the FLAPs with designed toehold hairpins that carry either an anti-FLAP or an anti-anti-FLAP sequence within the loop region. The addition of an input RNA molecule triggers a toehold-mediated strand invasion process that refolds the FLAP into an active or inactive configuration. Several of our designs display close-to-zero leak signals and correspondingly high ON/OFF fluorescence ratios. We also modified purine aptamers to sequester a partial anti-FLAP or an anti-anti-FLAP sequence to control the formation of the fluorogen-binding conformation, resulting in FLAPs whose fluorescence is activated or deactivated in the presence of guanine or adenine. We demonstrate that switching modules can be easily combined to generate FLAPs whose fluorescence depends on several inputs with different types of input logic.

Genetically Encoded RNA Sensors for Ratiometric and Multiplexed Imaging of Small Molecules in Living Cells

Genetically encoded sensors afford powerful tools for studying small molecules and metabolites in live cells. However, genetically encoded sensors with a general design remain to be developed. Here we develop genetically encoded RNA sensors with a modular design for ratiometric and multiplexed imaging of small molecules in live cells. The sensor utilizes aptazyme as a recognition module and the light-up RNA aptamer as a signal reporter. The conformation of light-up aptamers is abrogated by a blocking sequence, and aptazyme-mediated cleavage restores the correct conformation, delivering activated fluorescence for small molecule imaging. We first developed a genetically encoded ratiometric sensor using Mango aptamer as a reference and SRB2 as a reporter. It is shown that the sensor allows quantitative imaging and detection of theophylline in live cells. The generality of the design is further demonstrated for imaging other small molecules by replacing the aptazymes. Its ability for multiplexed imaging of small molecules is further explored via the integration of different small-molecule responsive aptazymes and light-up RNA aptamers. This modular design could offer a versatile platform for imaging diverse molecules in living cells.

DNA nanotechnology in ionic liquids and deep eutectic solvents

Nucleic acids have the ability to generate advanced nanostructures in a controlled manner and can interact with target sequences or molecules with high affinity and selectivity. For this reason, they have applications in a variety of nanotechnology applications, from highly specific sensors to smart nanomachines and even in other applications such as enantioselective catalysis or drug delivery systems. However, a common disadvantage is the use of water as the ubiquitous solvent. The use of nucleic acids in non-aqueous solvents offers the opportunity to create a completely new toolbox with unprecedented degrees of freedom. Ionic liquids (ILs) and deep eutectic solvents (DESs) are the most promising alternative solvents due to their unique electrolyte and solvent roles, as well as their ability to maintain the stability and functionality of nucleic acids. This review aims to be a comprehensive, critical, and accessible evaluation of how much this goal has been achieved and what are the most critical parameters for accomplishing a breakthrough.

In vitro selection of aptamers and their applications

The introduction of the in-vitro evolution method known as SELEX (Systematic Evolution of Ligands by Exponential enrichment) more than 30 years ago led to the conception of versatile synthetic receptors known as aptamers. Offering many benefits such as low cost, high stability and flexibility, aptamers have sparked innovation in molecular diagnostics, enabled advances in synthetic biology and have facilitated new therapeutic approaches. The SELEX method itself is inherently adaptable and offers near limitless possibilities in yielding functional nucleic acid ligands. This Primer serves to provide guidance on experimental design and highlight new growth areas for this impactful technology.

Enrichment strategies to enhance genome editing

Genome editing technologies hold great promise for numerous applications including the understanding of cellular and disease mechanisms and the development of gene and cellular therapies. Achieving high editing frequencies is critical to these research areas and to achieve the overall goal of being able to manipulate any target with any desired genetic outcome. However, gene editing technologies sometimes suffer from low editing efficiencies due to several challenges. This is often the case for emerging gene editing technologies, which require assistance for translation into broader applications. Enrichment strategies can support this goal by selecting gene edited cells from non-edited cells. In this review, we elucidate the different enrichment strategies, their many applications in non-clinical and clinical settings, and the remaining need for novel strategies to further improve genome research and gene and cellular therapy studies.

Fast-exchanging spirocyclic rhodamine probes for aptamer-based super-resolution RNA imaging

Live-cell RNA imaging with high spatial and temporal resolution remains a major challenge. Here we report the development of RhoBAST:SpyRho, a fluorescent light-up aptamer (FLAP) system ideally suited for visualizing RNAs in live or fixed cells with various advanced fluorescence microscopy modalities. Overcoming problems associated with low cell permeability, brightness, fluorogenicity, and signal-to-background ratio of previous fluorophores, we design a novel probe, SpyRho (Spirocyclic Rhodamine), which tightly binds to the RhoBAST aptamer. High brightness and fluorogenicity is achieved by shifting the equilibrium between spirolactam and quinoid. With its high affinity and fast ligand exchange, RhoBAST:SpyRho is a superb system for both super-resolution SMLM and STED imaging. Its excellent performance in SMLM and the first reported super-resolved STED images of specifically labeled RNA in live mammalian cells represent significant advances over other FLAPs. The versatility of RhoBAST:SpyRho is further demonstrated by imaging endogenous chromosomal loci and proteins.

Intricate 3D architecture of a DNA mimic of GFP

Numerous studies have shown how RNA molecules can adopt elaborate three-dimensional (3D) architectures1-3. By contrast, whether DNA can self-assemble into complex 3D folds capable of sophisticated biochemistry, independent of protein or RNA partners, has remained mysterious. Lettuce is an in vitro-evolved DNA molecule that binds and activates4 conditional fluorophores derived from GFP. To extend previous structural studies5,6 of fluorogenic RNAs, GFP and other fluorescent proteins7 to DNA, we characterize Lettuce-fluorophore complexes by X-ray crystallography and cryogenic electron microscopy. The results reveal that the 53-nucleotide DNA adopts a four-way junction (4WJ) fold. Instead of the canonical L-shaped or H-shaped structures commonly seen8 in 4WJ RNAs, the four stems of Lettuce form two coaxial stacks that pack co-linearly to form a central G-quadruplex in which the fluorophore binds. This fold is stabilized by stacking, extensive nucleobase hydrogen bonding-including through unusual diagonally stacked bases that bridge successive tiers of the main coaxial stacks of the DNA-and coordination of monovalent and divalent cations. Overall, the structure is more compact than many RNAs of comparable size. Lettuce demonstrates how DNA can form elaborate 3D structures without using RNA-like tertiary interactions and suggests that new principles of nucleic acid organization will be forthcoming from the analysis of complex DNAs.

Co-crystal structures of the fluorogenic aptamer Beetroot show that close homology may not predict similar RNA architecture

Beetroot is a homodimeric in vitro selected RNA that binds and activates DFAME, a conditional fluorophore derived from GFP. It is 70% sequence-identical to the previously characterized homodimeric aptamer Corn, which binds one molecule of its cognate fluorophore DFHO at its interprotomer interface. We have now determined the Beetroot-DFAME co-crystal structure at 1.95 Å resolution, discovering that this RNA homodimer binds two molecules of the fluorophore, at sites separated by ~30 Å. In addition to this overall architectural difference, the local structures of the non-canonical, complex quadruplex cores of Beetroot and Corn are distinctly different, underscoring how subtle RNA sequence differences can give rise to unexpected structural divergence. Through structure-guided engineering, we generated a variant that has a 12-fold fluorescence activation selectivity switch toward DFHO. Beetroot and this variant form heterodimers and constitute the starting point for engineered tags whose through-space inter-fluorophore interaction could be used to monitor RNA dimerization.

Imaging intracellular metabolite and protein changes in live mammalian cells with bright fluorescent RNA-based genetically encoded sensors

Fluorescent RNA (FR)-based genetically encoded sensors have been engineered to detect various essential metabolites in living systems. However, the unfavorable characteristics of FR impede sensor applications. Here, we describe a strategy for converting Pepper fluorescent RNA into a series of fluorescent sensors to detect their cognate targets both in vitro and in live cells. Compared to previously developed FR-based sensors, Pepper-based sensors exhibited expanded emission of up to 620 nm and markedly improved cellular brightness, allowing robust and real-time monitoring of the pharmacologic-triggered dynamics changes in the intracellular level of S-adenosylmethionine (SAM) and the optogenetic manipulated protein translocation in live mammalian cells. Furthermore, signal amplification in fluorescence imaging of the target was achieved using the CRISPR-display strategy by incorporating a Pepper-based sensor into the sgRNA scaffold. Together, these results demonstrate that Pepper can be readily developed into high-performance FR-based sensors to detect various cellular targets.

High-throughput, fluorescent-aptamer-based measurements of steady-state transcription rates for Mycobacterium tuberculosis RNA polymerase

The first step in gene expression is the transcription of DNA sequences into RNA. Regulation at the level of transcription leads to changes in steady-state concentrations of RNA transcripts, affecting the flux of downstream functions and ultimately cellular phenotypes. Changes in transcript levels are routinely followed in cellular contexts via genome-wide sequencing techniques. However, in vitro mechanistic studies of transcription have lagged with respect to throughput. Here, we describe the use of a real-time, fluorescent-aptamer-based method to quantitate steady-state transcription rates of the Mycobacterium tuberculosis RNA polymerase. We present clear controls to show that the assay specifically reports on promoter-dependent, full-length RNA transcription rates that are in good agreement with the kinetics determined by gel-resolved, α- 32 P NTP incorporation experiments. We illustrate how the time-dependent changes in fluorescence can be used to measure regulatory effects of nucleotide concentrations and identity, RNAP and DNA concentrations, transcription factors, and antibiotics. Our data showcase the ability to easily perform hundreds of parallel steady-state measurements across varying conditions with high precision and reproducibility to facilitate the study of the molecular mechanisms of bacterial transcription.

Significance Statement

RNA polymerase transcription mechanisms have largely been determined from in vitro kinetic and structural biology methods. In contrast to the limited throughput of these approaches, in vivo RNA sequencing provides genome-wide measurements but lacks the ability to dissect direct biochemical from indirect genetic mechanisms. Here, we present a method that bridges this gap, permitting high-throughput fluorescence-based measurements of in vitro steady-state transcription kinetics. We illustrate how an RNA-aptamer-based detection system can be used to generate quantitative information on direct mechanisms of transcriptional regulation and discuss the far-reaching implications for future applications.

Cladogenetic Orthogonal Light-Up Aptamers for Simultaneous Detection of Multiple Small Molecules in Cells

Recent successes in construction of light-up RNA aptamers allowed fluorescence-based live-cell imaging of RNAs. In addition, light-up aptamers have been converted into signaling aptamers that enable fluorometric detection of small chemicals. To date, only a single target chemical has been detected at a time in cells. In this study, we selected cladogenetic orthogonal light-up aptamers that output three different colors from the RNA library having the same ligand binding core. Two of the three functioned in mammalian cells. These two aptamers, which fluoresce blue and green upon binding of cognate fluorogen, were converted into signaling aptamers. Using these signaling aptamers in combination with a previously described light-up aptamer with red fluorescence, we demonstrated simultaneous detection of multiple chemicals in living cells. The cladogenetic orthogonal light-up aptamers developed in this study and the simple strategy for rational designing of the signaling aptamers will provide innovative advances in the field of RNA-based bioimaging.

Reversible Modulation of Aptamer-Ligand Binding in RNA Light-Up Aptamers Containing G-Quadruplex Using Chemical Stimuli

Regulating a system in equilibrium transiently to out-of-equilibrium by using certain stimuli is the strategy used by natural biomolecules to function. Herein, we showed that the interaction of synthetic RNA aptamers, having a G-quadruplex core structure, with their corresponding ligands could be regulated from their equilibrium state to non-equilibrium state in a reversible manner using simple chemical stimuli (Ag⁺ and cysteine). The approach would be useful for designing aptamer regulators that work in a dynamic nucleic acid network, where a strict control on aptamer-ligand interaction is needed. In addition, to the best of our knowledge, this is the first report which shows that RNA G-quadruplexes can be disrupted by the addition of silver ions. This would be useful not only in designing RNA-based sensors or regulators but would also be useful for understanding the role of metal ions in RNA folding and catalysis.

Application of CRISPR/Cas Systems in the Nucleic Acid Detection of Infectious Diseases

The CRISPR/Cas system is a protective adaptive immune system against attacks from foreign mobile genetic elements. Since the discovery of the excellent target-specific sequence recognition ability of the CRISPR/Cas system, the CRISPR/Cas system has shown excellent performance in the development of pathogen nucleic-acid-detection technology. In combination with various biosensing technologies, researchers have made many rapid, convenient, and feasible innovations in pathogen nucleic-acid-detection technology. With an in-depth understanding and development of the CRISPR/Cas system, it is no longer limited to CRISPR/Cas9, CRISPR/Cas12, and other systems that had been widely used in the past; other CRISPR/Cas families are designed for nucleic acid detection. We summarized the application of CRISPR/Cas-related technology in infectious-disease detection and its development in SARS-CoV-2 detection.

Fluorescent probes for the detection of disease-associated biomarkers

Fluorescent probes have emerged as indispensable chemical tools to the field of chemical biology and medicine. The ability to detect intracellular species and monitor physiological processes has not only advanced our knowledge in biology but has provided new approaches towards disease diagnosis. In this review, we detail the design criteria and strategies for some recently reported fluorescent probes that can detect a wide range of biologically important species in cells and in vivo. In doing so, we highlight the importance of each biological species and their role in biological systems and for disease progression. We then discuss the current problems and challenges of existing technologies and provide our perspective on the future directions of the research area. Overall, we hope this review will provide inspiration for researchers and prove as useful guide for the development of the next generation of fluorescent probes.

Rational Design of Self-Quenched Rhodamine Dimers as Fluorogenic Aptamer Probes for Live-Cell RNA Imaging

With the growing interest in the understanding of the importance of RNAs in health and disease, detection of RNAs in living cells is of high importance. Fluorogenic dyes that light up specifically selected RNA aptamers constitute an attractive direction in the design of RNA imaging probes. In this work, based on our recently proposed concept of a fluorogenic dimer, we aim to develop a robust molecular tool for intracellular RNA imaging. We rationally designed a fluorogenic self-quenched dimer (orange Gemini, o-Gemini) based on rhodamine and evaluated its capacity to light up its cognate aptamer o-Coral in solution and live cells. We found that the removal of biotin from the dimer slightly improved the fluorogenic response without losing the affinity to the cognate aptamer (o-Coral). On the other hand, replacing sulforhodamine with a carboxyrhodamine produced drastic improvement of the affinity and the turn-on response to o-Coral and, thus, a better limit of detection. In live cells expressing o-Coral-tagged RNAs, the carboxyrhodamine analogue of o-Gemini without a biotin unit displayed a higher signal as well as faster internalization into the cells. We suppose that less hydrophilic carboxyrhodamine compared to sulforhodamine can more readily penetrate through the cell plasma membrane and, together with its higher affinity to o-Coral, provide the observed improvement in the imaging experiments. The promiscuity of the o-Coral RNA aptamer to the fluorogenic dimer allowed us to tune a fluorogen chemical structure and thus drastically improve the fluorescence response of the probe to o-Coral-tagged RNAs.

Building an RNA-Based Toggle Switch Using Inhibitory RNA Aptamers

Synthetic RNA systems offer unique advantages such as faster response, increased specificity, and programmability compared to conventional protein-based networks. Here, we demonstrate an in vitro RNA-based toggle switch using RNA aptamers capable of inhibiting the transcriptional activity of T7 or SP6 RNA polymerases. The activities of both polymerases are monitored simultaneously by using Broccoli and malachite green light-up aptamer systems. In our toggle switch, a T7 promoter drives the expression of SP6 inhibitory aptamers, and an SP6 promoter expresses T7 inhibitory aptamers. We show that the two distinct states originating from the mutual inhibition of aptamers can be toggled by adding DNA sequences to sequester the RNA inhibitory aptamers. Finally, we assessed our RNA-based toggle switch in degrading conditions by introducing controlled degradation of RNAs using a mix of RNases. Our results demonstrate that the RNA-based toggle switch could be used as a control element for nucleic acid networks in synthetic biology applications.

A genetically encoded fluorescent biosensor for monitoring ATP in living cells with heterobifunctional aptamers

Visualizing the dynamics of ATP in living cells is key to understanding cellular energy metabolism and related diseases. However, the live-cell applications of current methods are still limited due to challenges in biological compatibility and sensitivity to pH. Herein, a novel label-free fluorescent " turn-on " biosensor for monitoring ATP in living bacterias and mammalian cells was developed. This biosensor (Broc-ATP) employed heterobifunctional aptamers to detect ATP with high sensitivity in vitro. In our system, a very useful tandem method was established by combining four Broc-ATPs with 3 × F30 three-way junction scaffold to construct an intracellular biosensor that achieves sufficient fluorescence to respond to intracellular ATP. This intracellular biosensor can be used for sensitive and specific dynamic imaging of ATP in mammalian cells. Hence, this genetically encoded biosensor provides a robust and efficient tool for the detection of intracellular ATP dynamics and 3 × F30 tandem method expands the application of heterobifunctional aptamers in mammalian cells.

Monitoring Molecular Properties of a Fluorescence Light-Up Aptamer Using Fluorescence Cross-Correlation Spectroscopy

Fluorescence light-up aptamers (FLAPs) are tools for RNA imaging, wherein the RNA of interest is appended with a FLAP sequence that can bind to a corresponding small-molecule fluorogen and enhance its fluorescence. The fluorescence properties of FLAPs have mostly been analyzed in bulk and described as the average of a large number of RNA–fluorogen complexes. In this study, we evaluated the feasibility of fluorescence correlation spectroscopy (FCS)- and fluorescence cross-correlation spectroscopy (FCCS)-based quantifications of FLAPs in a solution using Broccoli, a common FLAP, and its corresponding fluorogen, DFHBI-1T. We investigated the folding efficiency, photostability, and photophysical properties of the Broccoli–DFHBI-1T complex using their FCS/FCCS characteristics. With FCS, we observed that the fluorescence was affected by the affinity between Broccoli and DFHBI-1T and the folding (maturation) state of Broccoli RNA. Moreover, the FCCS measurement of ATTO647N-labeled Broccoli and its complex with DFHBI-1T revealed the proportion of the mature Broccoli–DFHBI-1T complex. The current FCS/FCCS-based study of Broccoli–DFHBI-1T provides a model for analyzing FLAPs and their fluorogen pairs at the single-molecule level.

Rapid screening of aptamers for fluorescent targets by integrated digital PCR and flow cytometry

In this paper, we report the development of a new strategy termed integrated digital PCR-fluorescence activated sorting based SELEX (IFS-SELEX) that enables rapid screening of aptamers against fluorescent targets. Initially, this strategy employs an integrated digital PCR system to amplify each sequence of a preliminarily enriched library, which is obtained by a traditional SELEX method, on the surface of polystyrene beads. Then, the as-prepared beads are incubated with the fluorescent target and then subjected to fluorescence-activated sorting. Since only those sequences with high binding affinity for the target are collected and sequenced, unnecessary analysis of ineligible sequences is avoided by this method, and the aptamer selection process is thereby greatly streamlined. As a proof-of-concept, we applied this strategy for the screening of aptamers against two fluorescent targets, i.e., ciprofloxacin (CFX) and thioflavin T (ThT), and successfully obtained corresponding sequences with low dissociation constants. The binding affinities of aptamers for ThT were well associated with the sorting regions defined in the fluorescence channel of the flow cytometry process. The experimental results demonstrated that the as-designed IFS-SELEX method can serve as a universal platform for rapid, facile, and efficient aptamer selection against various fluorescent targets.

The fluorescent aptamer Squash extensively repurposes the adenine riboswitch fold

Squash is an RNA aptamer that strongly activates the fluorescence of small-molecule analogs of the fluorophore of green fluorescent protein (GFP). Unlike other fluorogenic aptamers, isolated de novo from random-sequence RNA, Squash was evolved from the bacterial adenine riboswitch to leverage its optimized in vivo folding and stability. We now report the 2.7-Å resolution cocrystal structure of fluorophore-bound Squash, revealing that while the overall fold of the riboswitch is preserved, the architecture of the ligand-binding core is dramatically transformed. Unlike previously characterized aptamers that activate GFP-derived fluorophores, Squash does not harbor a G-quadruplex, sandwiching its fluorophore between a base triple and a noncanonical base quadruple in a largely apolar pocket. The expanded structural core of Squash allows it to recognize unnatural fluorophores that are larger than the simple purine ligand of the parental adenine riboswitch, and suggests that stable RNA scaffolds can tolerate larger variation than has hitherto been appreciated.

Incorporation of a FRET Pair into a Riboswitch RNA to Measure Mg2+ Concentration and RNA Conformational Change in Cell

Riboswitches are natural biosensors that can regulate gene expression by sensing small molecules. Knowledge of the structural dynamics of riboswitches is crucial to elucidate their regulatory mechanism and develop RNA biosensors. In this work, we incorporated the fluorophore, Cy3, and its quencher, TQ3, into a full-length adenine riboswitch RNA and its isolated aptamer domain to monitor the dynamics of the RNAs in vitro and in cell. The adenine riboswitch was sensitive to Mg²⁺ concentrations and could be used as a biosensor to measure cellular Mg²⁺ concentrations. Additionally, the TQ3/Cy3-labeled adenine riboswitch yielded a Mg²⁺ concentration that was similar to that measured using a commercial assay kit. Furthermore, the fluorescence response to the adenine of the TQ3/Cy3-labeled riboswitch RNA was applied to determine the proportions of multiple RNA conformational changes in cells. The strategy developed in this work can be used to probe the dynamics of other RNAs in cells and may facilitate the developments of RNA biosensors, drugs and engineering.

A fluorogenic RNA aptamer nanodevice for the low background imaging of mRNA in living cells

A fluorogenic RNA aptamer nanodevice integrating an entropy-driven RNA amplifier with near-infrared (NIR) light control was developed, affording high contrast and sensitivity for imaging low-abundance mRNA in living cells. The design principle offers a new approach for developing low-background imaging systems for live-cell studies and manipulation.

Amplified Fluorescence in Situ Hybridization by Small and Bright Dye-Loaded Polymeric Nanoparticles

Detection and imaging of RNA at the single-cell level is of utmost importance for fundamental research and clinical diagnostics. Current techniques of RNA analysis, including fluorescence in situ hybridization (FISH), are long, complex, and expensive. Here, we report a methodology of amplified FISH (AmpliFISH) that enables simpler and faster RNA imaging using small and ultrabright dye-loaded polymeric nanoparticles (NPs) functionalized with DNA. We found that the small size of NPs (below 20 nm) was essential for their access to the intracellular mRNA targets in fixed permeabilized cells. Moreover, proper selection of the polymer matrix of DNA-NPs minimized nonspecific intracellular interactions. Optimized DNA-NPs enabled sequence-specific imaging of different mRNA targets (survivin, actin, and polyA tails), using a simple 1 h staining protocol. Encapsulation of cyanine and rhodamine dyes with bulky counterions yielded green-, red-, and far-red-emitting NPs that were 2-100-fold brighter than corresponding quantum dots. These NPs enabled multiplexed detection of three mRNA targets simultaneously, showing distinctive mRNA expression profiles in three cancer cell lines. Image analysis confirmed the single-particle nature of the intracellular signal, suggesting single-molecule sensitivity of the method. AmpliFISH was found to be semiquantitative, correlating with RT-qPCR. In comparison with the commercial locked nucleic acid (LNA)-based FISH technique, AmpliFISH provides 8-200-fold stronger signal (dependent on the NP color) and requires only three steps vs ∼20 steps together with a much shorter time. Thus, combination of bright fluorescent polymeric NPs with FISH yields a fast and sensitive single-cell transcriptomic analysis method for RNA research and clinical diagnostics.

MicroRNA detection using light-up aptamer amplification based on nuclease protection transcription

The quantification of microRNAs (miRNAs) is important because the miRNA expression level is closely associated with the occurrence and development of diseases. Here, we report a simple nuclease protection transcription...

A novel fluorescent probe with a pyrazolo[4,3-c]quinoline core selectively recognizes c-MYC promoter G-quadruplexes

An aptamer combined with a c-MYC-selective fluorophore could work as the fluorescent core of nucleic acid mimics of fluorescent proteins to locate and image functional biomolecules in cells.

Structure-based investigation of fluorogenic Pepper aptamer

Pepper fluorescent RNAs are a recently reported bright, stable and multicolor fluorogenic aptamer tag that enable imaging of diverse RNAs in live cells. To investigate the molecular basis of the superior properties of Pepper, we determined the structures of complexes of Pepper aptamer bound with its cognate HBC or HBC-like fluorophores at high resolution by X-ray crystallography. The Pepper aptamer folds in a monomeric non-G-quadruplex tuning-fork-like architecture composed of a helix and one protruded junction region. The near-planar fluorophore molecule intercalates in the middle of the structure and is sandwiched between one non-G-quadruplex base quadruple and one noncanonical G·U wobble helical base pair. In addition, structure-based mutational analysis is evaluated by in vitro and live-cell fluorogenic detection. Taken together, our research provides a structural basis for demystifying the fluorescence activation mechanism of Pepper aptamer and for further improvement of its future application in RNA visualization.

Combining protein and RNA quantification to evaluate promoter activity by using dual-color fluorescent reporting systems

Herein, Broccoli/mCherry and an EGFP/mCherry dual-color fluorescent reporting systems have been established to quantify the promoter activity at transcription and translation levels in eukaryotic cells. Based on those systems, four commonly used promoters (CMV and SV40 of Pol II and U6, H1 of Pol III) were accurately evaluated at both the transcriptional and translational levels by combining accurate protein and RNA quantification. Furthermore, we verified that Pol III promoters can induce proteins expression, and Pol II promoter can be applied to express RNA molecules with defined length by combining a self-cleaving ribozyme and an artificial poly(A) tail. The dual-color fluorescence reporting systems described here could play a significant role in evaluating other gene expression regulators for gene therapy.

Fluorescent proteins of the EosFP clade: intriguing marker tools with multiple photoactivation modes for advanced microscopy

Optical fluorescence microscopy has taken center stage in the exploration of biological structure and dynamics, especially on live specimens, and super-resolution imaging methods continue to deliver exciting new insights into the molecular foundations of life. Progress in the field, however, crucially hinges on advances in fluorescent marker technology. Among these, fluorescent proteins (FPs) of the GFP family are advantageous because they are genetically encodable, so that live cells, tissues or organisms can produce these markers all by themselves. A subclass of them, photoactivatable FPs, allow for control of their fluorescence emission by light irradiation, enabling pulse-chase imaging and super-resolution microscopy. In this review, we discuss FP variants of the EosFP clade that have been optimized by amino acid sequence modification to serve as markers for various imaging techniques. In general, two different modes of photoactivation are found, reversible photoswitching between a fluorescent and a nonfluorescent state and irreversible green-to red photoconversion. First, we describe their basic structural and optical properties. We then summarize recent research aimed at elucidating the photochemical processes underlying photoactivation. Finally, we briefly introduce various advanced imaging methods facilitated by specific EosFP variants, and show some exciting sample applications.

Split light up aptamers as a probing tool for nucleic acids

Aptamers that bind non-fluorescent dyes and increase their fluorescence can be converted to fluorescent sensors. Here, we discuss and provide guidance for the design of split (binary) light up aptameric sensors (SLAS) for nucleic acid analysis. SLAS consist of two RNA or DNA strands and a fluorogenic organic dye added as a buffer component. The two strands hybridize to the analyzed DNA or RNA sequence and form a dye-binding pocket, followed by dye binding, and increase in its fluorescence. SLAS can detect nucleic acids in a cost-efficient label-free format since it does not require conjugation of organic dyes with nucleic acids. SLAS design is preferable over monolith fluorescent sensors due to simpler assay optimization and improved selectivity. RNA-based SLAS can be expressed in cells and used for intracellular monitoring and imaging biological molecules.

A malachite green light-up aptasensor for the detection of theophylline

Biosensors are of interest for the quantitative detection of small molecules (metabolites, drugs and contaminants for instance). To this end, fluorescence is a widely used technique that is easily associated to aptamers. Light-up aptamers constitute a particular class of oligonucleotides that, specifically induce fluorescence emission when binding to cognate fluorogenic ligands such as malachite green (MG). We engineered a dual aptasensor for theophylline (Th) based on the combination of switching hairpin aptamers specific for MG on the one hand and for Th on the other hand, hence their names: malaswitch (Msw) and theoswitch (Thsw). The two aptaswitches form a loop-loop or kissing Msw-Thsw complex only in the presence of theophylline, allowing binding of MG, subsequently generating a fluorescent signal. The combination of the best Msw and Thsw variants, MswG12 and Thsw19.1, results in a 20-fold fluorescence enhancement of MG at saturating theophylline concentration. This aptasensor discriminates between theophylline and its analogues caffeine and theobromine. Kissing aptaswitches derived from light-up aptamers constitute a novel sensing device.

Recent Development of Fluorescent Light-Up RNA Aptamers

Technologies for RNA imaging in live cells play an important role in understanding the function and regulatory process of RNAs. One approach for genetically encoded fluorescent RNA imaging involves fluorescent light-up aptamers (FLAPs), which are short RNA sequences that can bind cognate fluorogens and activate their fluorescence greatly. Over the past few years, FLAPs have emerged as genetically encoded RNA-based fluorescent biosensors for the cellular imaging and detection of various targets of interest. In this review, we first give a brief overview of the development of the current FLAPs based on various fluorogens. Then we further discuss on the photocycles of the reversibly photoswitching properties in FLAPs and their photostability. Finally, we focus on the applications of FLAPs as genetically encoded RNA-based fluorescent biosensors in biosensing and bioimaging, including RNA, non-nucleic acid molecules, metal ions imaging and quantitative imaging. Their design strategies and recent cellular applications are emphasized and summarized in detail.

Development and Applications of Fluorogen/Light-Up RNA Aptamer Pairs for RNA Detection and More

The central role of RNA in living systems made it highly desirable to have noninvasive and sensitive technologies allowing for imaging the synthesis and the location of these molecules in living cells. This need motivated the development of small pro-fluorescent molecules called "fluorogens" that become fluorescent upon binding to genetically encodable RNAs called "light-up aptamers." Yet, the development of these fluorogen/light-up RNA pairs is a long and thorough process starting with the careful design of the fluorogen and pursued by the selection of a specific and efficient synthetic aptamer. This chapter summarizes the main design and the selection strategies used up to now prior to introducing the main pairs. Then, the vast application potential of these molecules for live-cell RNA imaging and other applications is presented and discussed.

Promiscuous dye binding by a light-up aptamer: application for label-free multi-wavelength biosensing

Light-up DNA aptamers are promising label-free signal-transducers for biosensing applications due to their high chemical stability and low synthetic cost. Herein, we demonstrate that a dapoxyl DNA aptamer DAP-10-42 can be converted into a sensor generating a fluorescence signal at different wavelengths in the range of 500-660 nm depending on the dye that is present. This results from the discovered promiscuity of DAP-10-42 in binding fluorogenic dyes including arylmethane dyes. We have designed a split DAP-10-42 aptasensor for the detection of a katG gene fragment from Mycobacterium tuberculosis with a point mutation causing isoniazid resistance. Efficient interrogation of the gene fragment after nucleic acid sequence-based amplification (NASBA) is achieved directly in a protein-containing NASBA sample. This report lays a foundation for the application of the DAP-10-42 aptamer as a versatile sensing platform.

Genetically encoded light-up RNA aptamers and their applications for imaging and biosensing

Intracellular small ligands and biomacromolecules are playing crucial roles not only as executors but also as regulators. It is essential to develop tools to investigate their dynamics to interrogate their functions and reflect the cellular status. Light-up RNA aptamers are RNA sequences that can bind with their cognate nonfluorescent fluorogens and greatly activate their fluorescence. The emergence of genetically encoded light-up RNA aptamers has provided fascinating tools for studying intracellular small ligands and biomacromolecules owing to their high fluorescence activation degree and facile programmability. Here we review the burgeoning field of light-up RNA aptamers. We first briefly introduce light-up RNA aptamers with a focus on the photophysical properties of the fluorogens. Then design strategies of genetically encoded light-up RNA aptamer based sensors including turn-on, signal amplification and ratiometric rationales are emphasized.

Detection of SARS-CoV-2 and Its Mutated Variants via CRISPR-Cas13-Based Transcription Amplification

The outbreak of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) caused a global health emergency, and its gene mutation and evolution further posed uncertainty of epidemic risk. Herein, we reported a light-up CRISPR-Cas13 transcription amplification method, which enables the detection of SARS-CoV-2 and its mutated variants. Sequence specificity was ensured by both the ligation process and Cas13a/crRNA recognition, allowing us to identify viral RNA mutation. Light-up RNA aptamer allows sensitive output of amplification signals via target-activated ribonuclease activity of CRISPR-Cas13a. The RNA virus assay has been designed to detect coronavirus, SARS-CoV-2, Middle East respiratory syndrome (MERS), and SARS, as well as the influenza viruses such as, H1N1, H7N9, and H9N2. It was accommodated to sense as low as 82 copies of SARS-CoV-2. Particularly, it allowed us to strictly discriminate key mutation of the SARS-CoV-2 variant, D614G, which may induce higher epidemic and pathogenetic risk. The proposed RNA virus assays are promising for point-of-care monitoring of SARS-CoV-2 and its risking variants.