Achieving Atomic Dispersion of Highly Loaded Transition Metals in Small-Pore Zeolite SSZ-13: High-Capacity and High-Efficiency Low-Temperature CO and Passive NOx Adsorbers

Effect of vanadium and tungsten loading order on the denitration performance of F-doped V2O5-WO3/TiO2 catalysts

F-doped V2O5-WO3/TiO2 catalyst has been confirmed to have excellent denitration activity at low temperatures. Since the V2O5-WO3/TiO2 catalyst is a structure-sensitive catalyst, the loading order of V2O5 and WO3 may affect its denitration performance. In this paper, a series of F-doped V2O5-WO3/TiO2 catalysts with different V2O5 and WO3 loading orders were synthesized to investigate the effect of denitration performance at low temperatures. It was found that the loading orders led to significant gaps in denitration performance in the range of 120-240 °C. The results indicated loading WO3 first better utilized the oxygen vacancies on the TiF carrier promoting the generation of reduced vanadium species. In addition, loading WO3 first facilitated the dispersion of V2O5 thus enhanced the NH3 adsorption capacity of VWTiF. In situ DRIFT verified the rapid reaction between NO2, nitrate, and nitrite species and adsorbed NH3 over the VWTiF, confirming that the NH3 selective catalytic reduction (NH3-SCR) reaction over VWTiF at 240 °C proceeded by the Langmuir-Hinshelwood (L-H) mechanism. This research established the constitutive relationship between the loading order of V2O5 and WO3 and the denitration performance of the F-doped VWTi catalyst providing insights into the catalyst design process.

Ultrasmall Pd Clusters in FER Zeolite Alleviate CO Poisoning for Effective Low-Temperature Carbon Monoxide Oxidation

Ultrasmall Pd4 clusters form in the micropores of FER zeolite during low-temperature treatment (100 °C) in the presence of humid CO gas. They effectively catalyze CO oxidation below 100 °C, whereas Pd nanoparticles are not active as they are poisoned by CO. Using catalytic measurements, infrared (IR) spectroscopy, X-ray absorption spectroscopy (EXAFS), microscopy, and density functional theory calculations, we provide the molecular-level insight into this previously unreported phenomenon. Pd nanoparticles get covered with CO at low temperatures, which effectively blocks O2 activation until CO desorption occurs. Small Pd clusters in zeolites, in contrast, demonstrate fluxional behavior in the presence of CO, which significantly increases the affinity for binding O2. Our study provides a pathway to achieve low-temperature CO oxidation activity on the basis of a well-defined Pd/zeolite system.

Effects of Si/Al Ratio on Passive NOx Adsorption Performance over Pd/Beta Zeolites

In the current article, the effect of Si/Al ratio on the NO_x adsorption and storage capacity over Pd/Beta with 1 wt% Pd loading was investigated. The XRD, ²⁷Al NMR and ²⁹Si NMR measurements were used to determine the structure of Pd/Beta zeolites. XAFS, XPS, CO-DRIFT, TEM and H₂-TPR were used to identify the Pd species. The results showed that the NO_x adsorption and storage capacity on Pd/Beta zeolites gradually decreased with the increase of Si/Al ratio. Pd/Beta-Si (Si-rich, Si/Al~260) rarely has NO_x adsorption and storage capacity, while Pd/Beta-Al (Al-rich, Si/Al~6) and Pd/Beta-C (Common, Si/Al~25) exhibit excellent NO_x adsorption and storage capacity and suitable desorption temperature. Pd/Beta-C has slightly lower desorption temperature compared to Pd/Beta-Al. The NO_x adsorption and storage capacity increased for Pd/Beta-Al and Pd/Beta-C by hydrothermal aging treatment, while the NO_x adsorption and storage capacity on Pd/Beta-Si had no change.

Atomic Insights into the Cu Species Supported on Zeolite for Direct Oxidation of Methane to Methanol via Low-Damage HAADF-STEM

Precise determination of the structure-property relationship of zeolite-based metal catalysts is critical for the development toward practical applications. However, the scarcity of real-space imaging of zeolite-based low-atomic-number (LAN) metal materials due to the electron-beam sensitivity of zeolites has led to continuous debates regarding the exact LAN metal configurations. Here, a low-damage high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging technique is employed for direct visualization and determination of LAN metal (Cu) species in ZSM-5 zeolite frameworks. The structures of the Cu species are revealed based on the microscopy evidence and also proved by the complementary spectroscopy results. The correlation between the characteristic Cu size in Cu/ZSM-5 catalysts and their direct oxidation of methane to methanol reaction properties is unveiled. As a result, the mono-Cu species stably anchored by Al pairs inside the zeolite channels are identified as the key structure for higher C1 oxygenates yield and methanol selectivity for direct oxidation of methane. Meanwhile, the local topological flexibility of the rigid zeolite frameworks induced by the Cu agglomeration in the channels is also revealed. This work exemplifies the combination of microscopy imaging and spectroscopy characterization serves as a complete arsenal for revealing structure-property relationships of the supported metal-zeolite catalysts.

Cold-Start NOx Mitigation by Passive Adsorption Using Pd-Exchanged Zeolites: From Material Design to Mechanism Understanding and System Integration

It remains a major challenge to abate efficiently the harmful nitrogen oxides (NO_x) in low-temperature diesel exhausts emitted during the cold-start period of engine operation. Passive NO_x adsorbers (PNA), which could temporarily capture NO_x at low temperatures (below 200 °C) and release the stored NO_x at higher temperatures (normally 250-450 °C) to downstream selective catalytic reduction unit for complete abatement, hold promise to mitigate cold-start NO_x emissions. In this review, recent advances in material design, mechanism understanding, and system integration are summarized for PNA based on palladium-exchanged zeolites. First, we discuss the choices of parent zeolite, Pd precursor, and synthetic method for the synthesis of Pd-zeolites with atomic Pd dispersions, and review the effect of hydrothermal aging on the properties and PNA performance of Pd-zeolites. Then, we show how different experimental and theoretical methodologies can be integrated to gain mechanistic insights into the nature of Pd active sites, the NO_x storage/release chemistry, as well as the interactions between Pd and typical components/poisons in engine exhausts. This review also gathers several novel designs of PNA integration into modern exhaust after-treatment systems for practical application. At the end, we discuss the major challenges, as well as important implications, for the further development and real application of Pd-zeolite-based PNA in cold-start NO_x mitigation.

Current Progress on Methods and Technologies for Catalytic Methane Activation at Low Temperatures

Methane (CH₄ ) is an attractive energy source and important greenhouse gas. Therefore, from the economic and environmental point of view, scientists are working hard to activate and convert CH₄ into various products or less harmful gas at low-temperature. Although the inert nature of CH bonds requires high dissociation energy at high temperatures, the efforts of researchers have demonstrated the feasibility of catalysts to activate CH₄ at low temperatures. In this review, the efficient catalysts designed to reduce the CH₄ oxidation temperature and improve conversion efficiencies are described. First, noble metals and transition metal-based catalysts are summarized for activating CH₄ in temperatures ranging from 50 to 500 °C. After that, the partial oxidation of CH₄ at relatively low temperatures, including thermocatalysis in the liquid phase, photocatalysis, electrocatalysis, and nonthermal plasma technologies, is briefly discussed. Finally, the challenges and perspectives are presented to provide a systematic guideline for designing and synthesizing the highly efficient catalysts in the complete/partial oxidation of CH₄ at low temperatures.

Improving the hydrothermal stability of Pd/SSZ-13 for low-temperature NO adsorption: promotional effect of the Mg2+ co-cation

Insufficient hydrothermal stability is an issue that restricts application of Pd/SSZ-13 for low-temperature NO adsorption from vehicle emissions.

Pd-Doped SSZ-13 for Low-T NOx Adsorption: an Operando FT-IR Spectroscopy Study

In this study, mechanistic aspects of NO adsorption/desorption over a home-made Pd/SSZ-13 passive NOx adsorber (PNA) catalyst are investigated. Operando FT-IR spectroscopy and microreactor experiments are performed to envisage the performance of the catalyst and the pathway involved in NO adsorption, with particular emphasis to the impact of species such as C3H6 and CO. In the absence of C3H6 and CO, NO is observed to adsorb as nitrosyls (anhydrous and hydrated) over both Pd2+ and Pd+ species, and as nitrates. 80 μmolNOx/gcat (NO/Pd molar ratio of 0.8) are adsorbed. The stability of nitrosyls is higher in comparison to the nitrates in that the former initially dehydrate and further decompose at elevated temperatures (> 300 °C) leading to the evolution of NO. The presence of CO and C3H6 negatively affects the amounts of NO adsorbed (53 and 45 μmolNOx/gcat, respectively) due to the reduction of Pd sites. CO admission to the catalyst forms a variety of carbonyl species over Pd2+, Pd+ and Pd0 sites which upon NO admission are readily displaced and NO is adsorbed as hydrated/anhydrous nitrosyls of Pdn+. The nitrosyls so formed exhibit lower thermal stability in comparison to nitrosyls observed in the absence of CO and decompose below 300 °C. The addition of C3H6 leads to the apparent formation of oxidized species like acetone, acrolein and acetates, besides propylene adsorption. The NO adsorption in the presence of C3H6 leads to the formation of Pdn+(NO)(X) complexes; upon heating the decomposition of this complexes is observed at low temperatures along with propylene and water desorption. Formation of organic nitro-compounds is also observed that decompose at higher temperatures.

Assessing the stability of Pd-exchanged sites in zeolites with the aid of a high throughput quantum chemistry workflow

Cation exchanged-zeolites are functional materials with a wide range of applications from catalysis to sorbents. They present a challenge for computational studies using density functional theory due to the numerous possible active sites. From Al configuration, to placement of extra framework cation(s), to potentially different oxidation states of the cation, accounting for all these possibilities is not trivial. To make the number of calculations more tractable, most studies focus on a few active sites. We attempt to go beyond these limitations by implementing a workflow for a high throughput screening, designed to systematize the problem and exhaustively search for feasible active sites. We use Pd-exchanged CHA and BEA to illustrate the approach. After conducting thousands of explicit DFT calculations, we identify the sites most favorable for the Pd cation and discuss the results in detail. The high throughput screening identifies many energetically favorable sites that are non-trivial. Lastly, we employ these results to examine NO adsorption in Pd-exchanged CHA, which is a promising passive NOx adsorbent (PNA) during the cold start of automobiles. The results shed light on critical active sites for NOx capture that were not previously studied.

Deactivation of Pd/SSZ-13 by Potassium and Water for Passive NOx Adsorption

The passive NOx adsorber (PNA) material has been considered an effective candidate for the control of NOx from diesel exhaust during the engine cold start stage, and Pd/SSZ-13 attracts peoples’ attention mainly due to its superior hydrothermal stability and sulfur resistance. However, chemical poisoning tolerance of Pd/SSZ-13 is another key parameter to its practical application and future development. Herein, we prepared potassium-loaded Pd/SSZ-13 and evaluated the influence on NOx adsorption ability. The characterization results revealed that the loading of potassium could not destruct the structure of SSZ-13 but impaired the BET surface area and pore structure through the sintering of Pd species to PdO. Meanwhile, the grown PdO phase restrained the NOx adsorption ability and promoted the generation of NO2 at high temperatures. Moreover, the presence of H2O could also impair the NOx adsorption ability due to the competitive adsorption between H2O and NOx. This work verifies that the design of Pd/SSZ-13 sample with stable Pd species and excellent hydrophobicity is significant for its further application under harsh conditions.

The upgrading role of Al at T1/T2 sites in stabilizing Pd ions over Pd-beta passive NOx adsorbers under a reducing atmosphere

The preserved Pd ions as γ and β sites related with Al at T1–T2 sites corresponded to the stabilized NOx storage capability and rendered a suitable desorption temperature.

The Operating Cycle of NO Adsorption and Desorption in Pd-Chabazite for Passive NOx Adsorbers

Pd-doped chabazite (Pd/CHA) offers unique opportunities to adsorb and desorb NO_x in the target temperature range for application as a passive NO_x adsorber (PNA). The ability of Pd/CHA to trap NO_x emissions at low temperatures (<200 °C) is facilitated by the binding of NO_x species at various Pd sites available in the CHA framework. Density functional theory (DFT) simulations are performed to understand Pd speciation in CHA and the interaction of NO with Pd/CHA to explain the mechanisms of NO adsorption, oxidation, and desorption processes. The calculations are used to elucidate the important role of Pd¹⁺ cationic species, anchored at 6MR-3NN, in providing a strong (E_b = -272 kJ/mol) NO adsorption site in Pd/CHA. For NO release, the redox transformation of Pd species comes into play and Pd¹⁺ species are suggested to transform into cationic Pd²⁺, [PdOH]⁺, or [Pd-O-Pd]²⁺ species, all of which show significantly reduced NO binding (-116, -153, and -117 kJ/mol, respectively) as compared to Pd¹⁺. This enables NO desorption at the operating temperature of a downstream catalyst for subsequent catalytic reduction.

Effects of Treatment Conditions on Pd Speciation in CHA and Beta Zeolites for Passive NO x Adsorption

The structure and evolution of Pd species in Pd-exchanged zeolite materials intended for use as passive NO _x adsorbers were examined under various pretreatment conditions. Using in situ CO-diffuse reflectance infrared spectroscopy, Pd structures were characterized after 500 °C pretreatments in inert (Ar), water (1-2% H₂O in Ar), oxidizing (air), and reducing (H₂, CO) atmospheres. Two zeolites of similar Si/Al ratios but different framework topologies (Beta, CHA) were found to show different distributions of Pd species, depending on the reducing agent used. Reduction in H₂ (500 °C; 10% H₂ in Ar) followed by re-oxidation (500 °C; air) led to higher amounts of single-site Pd ions on Pd-CHA than Pd-Beta, whereas high-temperature reduction in CO (500 °C; 1000 ppm CO in Ar) followed by re-oxidation (500 °C; air) led to significant loss of ionic Pd on both Pd-CHA and Pd-Beta, albeit H₂ temperature-programmed reduction and XPS experiments suggest that this phenomena may be limited to surface Pd. High-temperature treatments with water (500 °C; 1-2% H₂O in Ar) are shown to form either Pd metal or PdO particles, with Pd-Beta being more susceptible to these effects than Pd-CHA. This work suggests that the effects of CO are especially problematic with respect to the durability of these materials in passive NO _x adsorption applications, especially in the case of Beta zeolite.

Multifunctional Catalyst Combination for the Direct Conversion of CO2 to Propane

The production of carbon-rich hydrocarbons via CO₂ valorization is essential for the transition to renewable, non-fossil-fuel-based energy sources. However, most of the recent works in the state of the art are devoted to the formation of olefins and aromatics, ignoring the rest of the hydrocarbon commodities that, like propane, are essential to our economy. Hence, in this work, we have developed a highly active and selective PdZn/ZrO₂+SAPO-34 multifunctional catalyst for the direct conversion of CO₂ to propane. Our multifunctional system displays a total selectivity to propane higher than 50% (with 20% CO, 6% C₁, 13% C₂, 10% C₄, and 1% C₅) and a CO₂ conversion close to 40% at 350 °C, 50 bar, and 1500 mL g^-1 h^-1. We attribute these results to the synergy between the intimately mixed PdZn/ZrO₂ and SAPO-34 components that shifts the overall reaction equilibrium, boosting CO₂ conversion and minimizing CO selectivity. Comparison to a PdZn/ZrO₂+ZSM-5 system showed that propane selectivity is further boosted by the topology of SAPO-34. The presence of Pd in the catalyst drives paraffin production via hydrogenation, with more than 99.9% of the products being saturated hydrocarbons, offering very important advantages for the purification of the products.

Biomimetic CO oxidation below -100 °C by a nitrate-containing metal-free microporous system

CO oxidation is of importance both for inorganic and living systems. Transition and precious metals supported on various materials can oxidize CO to CO2. Among them, few systems, such as Au/TiO2, can perform CO oxidation at temperatures as low as -70 °C. Living (an)aerobic organisms perform CO oxidation with nitrate using complex enzymes under ambient temperatures representing an essential pathway for life, which enables respiration in the absence of oxygen and leads to carbonate mineral formation. Herein, we report that CO can be oxidized to CO2 by nitrate at -140 °C within an inorganic, nonmetallic zeolitic system. The transformation of NOx and CO species in zeolite as well as the origin of this unique activity is clarified using a joint spectroscopic and computational approach.

Local structure and NO adsorption/desorption property of Pd2+ cations at different paired Al sites in CHA zeolite

Recently, Pd-exchanged CHA zeolites (Pd-CHA) have attracted attention as promising passive NOx adsorbers (PNAs) for reducing NOx emissions during the cold start period of a vehicle engine. In this work, the relationship between the local structures and the NO adsorption/desorption properties of the Pd cations in CHA zeolites was investigated. Pd cation formation and NO adsorption were theoretically explored by density functional theory (DFT) calculations for different paired Al sites in six-/eight-membered rings (6MR/8MR). Furthermore, we prepared a series of Pd-CHAs with different Pd loadings (0.5-5.4 wt%) and evaluated their NO adsorption/desorption properties by in situ infrared (IR) spectroscopy and temperature-programmed desorption (TPD) measurements. The increase in the Pd loading resulted in a shift in the NO desorption temperature toward a higher temperature regime. This phenomenon was ascribed to the increase in the proportion of less stable Pd cations, resulting in improved NO adsorption. Furthermore, the effect of Al distribution on the NO adsorption property of Pd-CHA was examined using CHA zeolites containing different proportions of paired Al sites in 6MR while maintaining similar Si/Al ratios (Si/Al = 12.0-16.5). The present study, based on a combination of theoretical and experimental techniques, shows that the NO adsorption/desorption properties over Pd-CHA can be tuned by controlling the Pd loading amount and the type of paired Al sites.

Pd/FER vs Pd/SSZ-13 Passive NOx Adsorbers: Adsorbate-controlled Location of Atomically Dispersed Pd(II) in FER Determines High Activity and Stability

Pd-loaded FER and SSZ-13 zeolites as low-temperature passive NOx adsorbers (PNA) are compared under practical conditions. Vehicle cold-start exposes the material to CO under a range of concentrations, necessitating a systematic exploration of the effect of CO on the performance of isolated Pd ions in PNA. NO release temperature of both adsorbers decreases gradually with the increase of CO concentration from a few hundred to a few thousand ppm. This beneficial effect results from local nano-"hot spot" formation during CO oxidation. Dissimilar to Pd/SSZ-13, increasing the CO concentration above ~1,000 ppm improves the NOx storage significantly for Pd/FER, attributed to the presence of Pd ions in FER γ-site that is shielded from NOx. CO mobilizes this Pd atom to the NOx accessible position where it becomes active for PNA. This behavior explains the very high resistance of Pd/FER to hydrothermal aging: Pd/FER materials survive hydrothermal aging at 8000C in 10% H2O vapor for 16 hours with no deterioration in NOx uptake/release behavior. Thus, by allocating Pd ions to the specific microporous pockets in FER, we have produced (hydro)thermally stable and active PNA materials.

Onset of High Methane Combustion Rates over Supported Palladium Catalysts: From Isolated Pd Cations to PdO Nanoparticles

Industrial low-temperature methane combustion catalyst Pd/Al₂O₃ suffers from H₂O-induced deactivation. It is imperative to design Pd catalysts free from this deactivation and with high atomic efficiency. Using a small-pore zeolite SSZ-13 as support, herein we report well-defined Pd catalysts with dominant active species as finely dispersed Pd cations, uniform PdO particles embedded inside the zeolite framework, or PdO particles decorating the zeolite external surface. Through detailed reaction kinetics and spectroscopic and microscopic studies, we show that finely dispersed sites are much less active than PdO nanoparticles. We further demonstrate that H₂O-induced deactivation can be readily circumvented by using zeolite supports with high Si/Al ratios. Finally, we provide a few rational catalyst design suggestions for methane oxidation based on the new knowledge learned in this study.

Analysis of Ion-Exchanged ZSM-5, BEA, and SSZ-13 Zeolite Trapping Materials under Realistic Exhaust Conditions

An industry-defined evaluation protocol was used to evaluate the hydrocarbon trapping (HCT) and passive NOx adsorption (PNA) potential for BEA, ZSM-5, and SSZ-13 zeolites with ion-exchanged Pd or Ag. All materials underwent 700 °C degreening prior to exposure to an industry-derived protocol gas stream, which included NOx, ethylene, toluene, and decane as measured trapping species as well as common exhaust gasses CO, H2O, O2, CO2, and H2. Evaluation showed that BEA and ZSM-5 zeolites were effective at trapping hydrocarbons (HCs), as saturation was not achieved after 30 min of exposure. SSZ-13 also stored HCs but was only able to adsorb 20–25% compared to BEA and ZSM-5. The presence of Ag or Pd did not impact the overall HC uptake, particularly in the first three minutes. Pd/zeolites had significantly lower THC release temperature, and it aided in the conversion of the released HCs; Ag only had a moderate effect in both areas. With respect to NOx adsorption, the level of uptake was much lower than HCs on all samples, and Ag or Pd was necessary with Pd being notably more effective. Additionally, only Pd/ZSM-5 and Pd/SSZ-13 continue to store a portion of the NOx above 200 °C, which is critical for downstream selective catalytic NOx reduction (SCR). Hydrothermal aging (800 °C for 50 h) of a subset of the samples were performed: BEA, Pd/BEA, ZSM-5, Pd/ZSM-5, and Pd/SSZ-13. There was a minimal effect on the HC storage, ~10% reduction in capacity with no effect on release temperature; however, only Pd/SSZ-13 showed significant NOx storage after aging.

Improvement of NOx uptake/release over Pd/Beta by propylene: shielding effect of intermediates on adsorbed NOx species

Passive NOx adsorbers (PNAs) are capable of trapping NOx at low temperature and releasing the trapped NOx into the gas circuit at higher temperatures, where downstream NOx reduction catalysts are activated. Hydrocarbons have a significant effect on the performance of PNAs, nonetheless research in this area has been overlooked. Here the chemistry of NOx adsorption and desorption in the presence of C3H6 was studied. For different pore-size zeolites (BEA, MFI and CHA), the addition of C3H6 always increased the NOx adsorption capacity at a low temperature and raised the NOx desorption temperature. Spectroscopic and computational investigations were performed using the model Pd/Beta to unravel the relevant mechanism. Fourier transform infrared (FTIR) spectra indicated that more Pd+ was formed in the presence of C3H6, which contributed to higher NOx storage capacity. An intermediate Pd-NC3H6O was probed and its evolution procedure was modeled by density functional theory (DFT) calculations. The results showed that a shielding effect of Pd-NC3H6O on Pd+-NO improved the NOx desorption temperature. This investigation has important implications for how short-chain olefins and even more complex gas mixtures affect the NOx adsorption and desorption performance of Pd/zeolite.

Transformation of Bulk Pd to Pd Cations in Small-Pore CHA Zeolites Facilitated by NO

Atomic dispersion of metal species has attracted attention as a unique phenomenon that affects adsorption properties and catalytic activities and that can be used to design so-called single atom materials. In this work, we describe atomic dispersion of bulk Pd into small pores of CHA zeolites. Under 4% NO flow at 600 °C, bulk Pd metal on the outside of CHA zeolites effectively disperses, affording Pd²⁺ cations on Al sites with concomitant formation of N₂O, as revealed by microscopic and spectroscopic characterizations combined with mass spectroscopy. In the present method, even commercially available submicrosized Pd black can be used as a Pd source, and importantly, 4.1 wt % of atomic Pd²⁺ cations, which is the highest loading amount reported so far, can be introduced into CHA zeolites. The structural evolution of bulk Pd metal is also investigated by in situ X-ray absorption spectroscopy (XAS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), as well as ab initio thermodynamic analysis using density functional theory (DFT) calculations.

Computational Modeling Predicts the Stability of Both Pd+ and Pd2+ Ion-Exchanged into H-CHA

Passive NOx adsorbers (PNA) using Pd/zeolites have emerged as a promising solution for the reduction of cold-start emissions from vehicle exhaust. However, the nature of the active sites and the mechanisms underlying NOx adsorption in Pd/zeolites remain a subject of ongoing investigation. In this study, we employ quantum chemical simulations to investigate the structure of Pd species in cation-exchange sites at isolated Al and Al pairs in the 6-ring and 8-ring of the CHA framework, before the introduction of NOx. Our calculations show that the speciation of Pd in these exchange sites strongly depends on the precise Al arrangement within the framework, as well as the operating conditions. Ionically dispersed Pd is found to be the most favorable species over a wide range of oxidizing and reducing conditions. Small oligomers of PdO and metallic Pd do not appear to be competitive at either isolated Al or Al pairs. Notably, our calculations show that ion exchange sites other than next-next-nearest neighbor Al pairs in the 6-ring will be preferentially occupied by Pd+ instead of Pd2+. The stability of Pd+ in the zeolite environment is an interesting contrast with its rareness in molecular Pd compounds. Nonetheless, a detailed analysis of the electronic structure shows that predicted Pd oxidation states are consistent with chemical intuition for all complexes investigated in this study. We also discuss the potential ambiguity in Pd characterization provided by typical experimental techniques such as XANES, EXAFS and UV-VIS, and highlight the need for additional EPR spectroscopy studies to further elucidate the initial Pd speciation in zeolites for PNA applications.

Economizing on Precious Metals in Three-Way Catalysts: Thermally Stable and Highly Active Single-Atom Rhodium on Ceria for NO Abatement under Dry and Industrially Relevant Conditions*

We show for the first time that atomically dispersed Rh cations on ceria, prepared by a high-temperature atom-trapping synthesis, are the active species for the (CO+NO) reaction. This provides a direct link with the organometallic homogeneous Rh^I complexes capable of catalyzing the dry (CO+NO) reaction. The thermally stable Rh cations in 0.1 wt % Rh₁ /CeO₂ achieve full NO conversion with a turn-over-frequency (TOF) of around 330 h^-1 per Rh atom at 120 °C. Under dry conditions, the main product above 100 °C is N₂ with N₂ O being the minor product. The presence of water promotes low-temperature activity of 0.1 wt % Rh₁ /CeO₂ . In the wet stream, ammonia and nitrogen are the main products above 120 °C. The uniformity of Rh ions on the support, allows us to detect the intermediates of (CO+NO) reaction via IR measurements on Rh cations on zeolite and ceria. We also show that NH₃ formation correlates with the water gas shift (WGS) activity of the material and detect the formation of Rh hydride species spectroscopically.

Au-Modified Pd catalyst exhibits improved activity and stability for NO direct decomposition

The promotion of a Pd catalyst with Au leads to higher and stable activity for the direct decomposition of NO, due to improved oxygen desorption.

Progress and future challenges in passive NO adsorption over Pd/zeolite catalysts

Proposed NO adsorption cycles over Pd/zeolite materials.

Single-Atom Catalysts Supported by Crystalline Porous Materials: Views from the Inside

Single-atom catalysts (SACs) have recently emerged as an exciting system in heterogeneous catalysis showing outstanding performance in many catalytic reactions. Single-atom catalytic sites alone are not stable and thus require stabilization from substrates. Crystalline porous materials such as zeolites and metal-organic frameworks (MOFs) are excellent substrates for SACs, offering high stability with the potential to further enhance their performance due to synergistic effects. This review features recent work on the structure, electronic, and catalytic properties of zeolite and MOF-protected SACs, offering atomic-scale views from the "inside" thanks to the subatomic resolution of synchrotron X-ray absorption spectroscopy (XAS). The extended X-ray absorption fine structure and associated methods will be shown to be powerful tools in identifying the single-atom site and can provide details into the coordination environment and bonding disorder of SACs. The X-ray absorption near-edge structure will be demonstrated as a valuable method in probing the electronic properties of SACs by analyzing the white line intensity, absorption edge shift, and pre-/postedge features. Emphasis is also placed on in situ/operando XAS using state-of-the-art equipment, which can unveil the changes in structure and properties of SACs during the dynamic catalytic processes in a highly sensitive and time-resolved manner.

Single-Atom Catalysts across the Periodic Table

Isolated atoms featuring unique reactivity are at the heart of enzymatic and homogeneous catalysts. In contrast, although the concept has long existed, single-atom heterogeneous catalysts (SACs) have only recently gained prominence. Host materials have similar functions to ligands in homogeneous catalysts, determining the stability, local environment, and electronic properties of isolated atoms and thus providing a platform for tailoring heterogeneous catalysts for targeted applications. Within just a decade, we have witnessed many examples of SACs both disrupting diverse fields of heterogeneous catalysis with their distinctive reactivity and substantially enriching our understanding of molecular processes on surfaces. To date, the term SAC mostly refers to late transition metal-based systems, but numerous examples exist in which isolated atoms of other elements play key catalytic roles. This review provides a compositional encyclopedia of SACs, celebrating the 10th anniversary of the introduction of this term. By defining single-atom catalysis in the broadest sense, we explore the full elemental diversity, joining different areas across the whole periodic table, and discussing historical milestones and recent developments. In particular, we examine the coordination structures and associated properties accessed through distinct single-atom-host combinations and relate them to their main applications in thermo-, electro-, and photocatalysis, revealing trends in element-specific evolution, host design, and uses. Finally, we highlight frontiers in the field, including multimetallic SACs, atom proximity control, and possible applications for multistep and cascade reactions, identifying challenges, and propose directions for future development in this flourishing field.

Controllable positions of Cu2+ to enhance low-temperature SCR activity on novel Cu-Ce-La-SSZ-13 by a simple one-pot method

Regulation of Cu²⁺ ions to migrate to more active SCR reaction sites can efficiently improve low-temperature SCR activity.