Constructing Universal Ionic Sieves via Alignment of Two‐Dimensional Covalent Organic Frameworks (COFs)

Covalent Organic Framework-Based Materials for Advanced Lithium Metal Batteries

Lithium metal batteries (LMBs), with high energy densities, are strong contenders for the next generation of energy storage systems. Nevertheless, the unregulated growth of lithium dendrites and the unstable solid electrolyte interphase (SEI) significantly hamper their cycling efficiency and raise serious safety concerns, rendering LMBs unfeasible for real-world implementation. Covalent organic frameworks (COFs) and their derivatives have emerged as multifunctional materials with significant potential for addressing the inherent problems of the anode electrode of the lithium metal. This potential stems from their abundant metal-affine functional groups, internal channels, and widely tunable architecture. The original COFs, their derivatives, and COF-based composites can effectively guide the uniform deposition of lithium ions by enhancing conductivity, transport efficiency, and mechanical strength, thereby mitigating the issue of lithium dendrite growth. This review provides a comprehensive analysis of COF-based and derived materials employed for mitigating the challenges posed by lithium dendrites in LMB. Additionally, we present prospects and recommendations for the design and engineering of materials and architectures that can render LMBs feasible for practical applications.

Energy level regulation of anions via hydrogen bond effects to construct a stable solid electrolyte interface for a high-stability lithium metal anode

An intermolecular hydrogen bond between 2,5-dihydroxyterephthalic acid and the anions in the Li+ solvation shell is constructed to promote the formation of a LiF-rich SEI on a metallic Li electrode. Li metal batteries with improved cyclability (140 cycles under an N/P ratio of 4.9) and high capacity retention (90%) are eventually obtained.

Construction of a Bifunctional Redox-Site Conjugated Covalent-Organic Framework for Photoinduced Precision Trapping of Uranyl Ions

The performance of covalent-organic frameworks (COFs) for the photocatalytic extraction of uranium is greatly limited by the number of adsorption sites. Herein, inspired by electronegative redox reactions, we designed a nitrogen-oxygen rich pyrazine connected COF (TQY-COF) with multiple redox sites as a platform for extracting uranium via combining superaffinity and enhanced photoinduction. The preorganized bisnitrogen-bisoxygen donor configuration on TQY-COF is entirely matched with the typical geometric coordination of hexavalent uranyl ions, which demonstrates high affinity (tetra-coordination). In addition, the presence of the carbonyl group and pyrazine ring effectively stores and controls electron flow, which efficaciously facilitates the separation of e-/h+ and enhances photocatalytic performance. The experimental results show that TQY-COF removes up to 99.8% of uranyl ions from actual uranium mine wastewater under the light conditions without a sacrificial agent, and the separation coefficient reaches 1.73 × 106 mL g-1 in the presence of multiple metal ions, which realizes the precise separation in the complex environment. Importantly, DFT calculations further elucidate the coordination mechanism of uranium and demonstrate the necessity of the presence of N/O atoms in the photocatalytic adsorption of uranium.

On-Water Surface Synthesis of Vinylene-Linked Cationic Two-Dimensional Polymer Films as the Anion-Selective Electrode Coating

Vinylene-linked two-dimensional polymers (V-2DPs) and their layer-stacked covalent organic frameworks (V-2D COFs) featuring high in-plane π-conjugation and robust frameworks have emerged as promising candidates for energy-related applications. However, current synthetic approaches are restricted to producing V-2D COF powders that lack processability, impeding their integration into devices, particularly within membrane technologies reliant upon thin films. Herein, we report the novel on-water surface synthesis of vinylene-linked cationic 2DPs films (V-C2DP-1 and V-C2DP-2) via Knoevenagel polycondensation, which serve as the anion-selective electrode coating for highly-reversible and durable zinc-based dual-ion batteries (ZDIBs). Model reactions and theoretical modeling revealed the enhanced reactivity and reversibility of the Knoevenagel reaction on the water surface. On this basis, we demonstrated the on-water surface 2D polycondensation towards V-C2DPs films that show large lateral size, tunable thickness, and high chemical stability. Representatively, V-C2DP-1 presents as a fully crystalline and face-on oriented film with in-plane lattice parameters of a=b≈43.3 Å. Profiting from its well-defined cationic sites, oriented 1D channels, and stable frameworks, V-C2DP-1 film possesses superior bis(trifluoromethanesulfonyl)imide anion (TFSI-)-transport selectivity (transference, t_=0.85) for graphite cathode in high-voltage ZDIBs, thus triggering additional TFSI--intercalation stage and promoting its specific capacity (from ~83 to 124 mAh g-1) and cycling life (>1000 cycles, 95 % capacity retention).

Effective separation of dyes/salts by sulfonated covalent organic framework membranes based on phenolamine network conditioning

This study developed a modified polyacrylonitrile (PAN) membrane controlled by a phenol-amine network and enhanced with a sulfonated covalent organic framework (SCOF), aimed at improving the efficiency of textile wastewater treatment. Utilizing a phenol-amine network control strategy allows for precise manipulation of interfacial reactions in the synthesis of SCOF, achieving highly uniform modification on the surface of the PAN membrane. This modified membrane demonstrated high rejection of over 98% for various water-soluble dyes, including Alcian blue 8GX, Coomassie Brilliant Blue G250, methyl blue, congo red, and rose bengal, and also exhibited specific selectivity in processing salt-containing wastewater. By adjusting the deposition time of the phenol-amine and the concentration of SCOF monomers, optimal retention performance and permeate flux were achieved, effectively separating dyes and salts. This research provides a new and effective solution for treating textile wastewater, especially in separating and recovering dyes and salts, offering broad application prospects in environmental management and water resource management, and highlighting its significant practical implications.

Advanced Polymers in Cathodes and Electrolytes for Lithium-Sulfur Batteries: Progress and Prospects

Lithium-sulfur (Li-S) batteries, which store energy through reversible redox reactions with multiple electron transfers, are seen as one of the promising energy storage systems of the future due to their outstanding advantages. However, the shuttle effect, volume expansion, low conductivity of sulfur cathodes, and uncontrollable dendrite phenomenon of the lithium anodes have hindered the further application of Li-S batteries. In order to solve the problems and clarify the electrochemical reaction mechanism, various types of materials, such as metal compounds and carbon materials, are used in Li-S batteries. Polymers, as a class of inexpensive, lightweight, and electrochemically stable materials, enable the construction of low-cost, high-specific capacity Li-S batteries. Moreover, polymers can be multifunctionalized by obtaining rich structures through molecular design, allowing them to be applied not only in cathodes, but also in binders and solid-state electrolytes to optimize electrochemical performance from multiple perspectives. The most widely used areas related to polymer applications in Li-S batteries, including cathodes and electrolytes, are selected for a comprehensive overview, and the relevant mechanisms of polymer action in different components are discussed. Finally, the prospects for the practical application of polymers in Li-S batteries are presented in terms of advanced characterization and mechanistic analysis.

Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms

Rechargeable metal-sulfur batteries are considered promising candidates for energy storage due to their high energy density along with high natural abundance and low cost of raw materials. However, they could not yet be practically implemented due to several key challenges: (i) poor conductivity of sulfur and the discharge product metal sulfide, causing sluggish redox kinetics, (ii) polysulfide shuttling, and (iii) parasitic side reactions between the electrolyte and the metal anode. To overcome these obstacles, numerous strategies have been explored, including modifications to the cathode, anode, electrolyte, and binder. In this review, the fundamental principles and challenges of metal-sulfur batteries are first discussed. Second, the latest research on metal-sulfur batteries is presented and discussed, covering their material design, synthesis methods, and electrochemical performances. Third, emerging advanced characterization techniques that reveal the working mechanisms of metal-sulfur batteries are highlighted. Finally, the possible future research directions for the practical applications of metal-sulfur batteries are discussed. This comprehensive review aims to provide experimental strategies and theoretical guidance for designing and understanding the intricacies of metal-sulfur batteries; thus, it can illuminate promising pathways for progressing high-energy-density metal-sulfur battery systems.

Membranes based on Covalent Organic Frameworks through Green and Scalable Interfacial Polymerization using Ionic Liquids for Antibiotic Desalination

Covalent organic framework (COF) membranes featuring uniform topological structures and devisable functions, show huge potential in water purification and molecular separation. Nevertheless, the inability of uniform COF membranes to be produced on an industrial scale and their nonenvironmentally friendly fabrication method are the bottleneck preventing their industrial applications. Herein, we report a new green and industrially adaptable scraping-assisted interfacial polymerization (SAIP) technique to fabricate scalable and uniform TpPa COF membranes. The process used non-toxic and low-volatility ionic liquids (ILs) as organic phase instead of conventional organic solvents for interfacial synthesis of TpPa COF layer on a support membrane, which can simultaneously achieve the purposes of (i) improving the greenness of membrane-forming process and (ii) fabricating a robust membrane that can function beyond the conventional membranes. This approach yields a large-area, continuous COF membrane (19×25 cm2 ) with a thickness of 78 nm within a brief period of 2 minutes. The resulting membrane exhibited an unprecedented combination of high permeance (48.09 L m-2 h-1 bar-1 ) and antibiotic desalination efficiency (e.g., NaCl/adriamycin separation factor of 41.8), which is superior to the commercial benchmarking membranes.

Mobile energy storage technologies for boosting carbon neutrality

Carbon neutrality calls for renewable energies, and the efficient use of renewable energies requires energy storage mediums that enable the storage of excess energy and reuse after spatiotemporal reallocation. Compared with traditional energy storage technologies, mobile energy storage technologies have the merits of low cost and high energy conversion efficiency, can be flexibly located, and cover a large range from miniature to large systems and from high energy density to high power density, although most of them still face challenges or technical bottlenecks. In this review, we provide an overview of the opportunities and challenges of these emerging energy storage technologies (including rechargeable batteries, fuel cells, and electrochemical and dielectric capacitors). Innovative materials, strategies, and technologies are highlighted. Finally, the future directions are envisioned. We hope this review will advance the development of mobile energy storage technologies and boost carbon neutrality.

Recent Progress of Covalent Organic Frameworks-Based Materials in Photocatalytic Applications: A Review

Covalent organic frameworks (COFs) are one type of porous organic materials linked by covalent bonds. COFs materials exhibit many outstanding characteristics such as high porosity, high chemical and thermal stability, large specific surface area, efficient electron transfer efficiency, and the ability for predesigned structures. These exceptional advantages enable COFs materials to exhibit remarkable performance in photocatalysis. Additionally, the activity of COFs materials as photocatalysts can be significantly upgraded by ion doping and the formation of heterojunctions. This paper summarizes the latest research progress on COF-based materials applied in photocatalytic systems. Initially, typical structures and preparation methods of COFs are analyzed and compared. Moreover, the essential principles of photocatalytic reactions over COFs-based materials and the latest research developments in photocatalytic hydrogen production, CO2 reduction, pollutants elimination, organic transformation, and overall water splitting are indicated. At last, the outlook and challenges of COF-based materials in photocatalysis are discussed. This review is intended to permit instructive guidance for the efficient use of photocatalysis based on COFs in the future.

Recent Progress for Concurrent Realization of Shuttle-Inhibition and Dendrite-Free Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have become one of the most promising new-generation energy storage systems owing to their ultrahigh energy density (2600 Wh kg-1 ), cost-effectiveness, and environmental friendliness. Nevertheless, their practical applications are seriously impeded by the shuttle effect of soluble lithium polysulfides (LiPSs), and the uncontrolled dendrite growth of metallic Li, which result in rapid capacity fading and battery safety problems. A systematic and comprehensive review of the cooperative combination effect and tackling the fundamental problems in terms of cathode and anode synchronously is still lacking. Herein, for the first time, the strategies for inhibiting shuttle behavior and dendrite-free Li-S batteries simultaneously are summarized and classified into three parts, including "two-in-one" S-cathode and Li-anode host materials toward Li-S full cell, "two birds with one stone" modified functional separators, and tailoring electrolyte for stabilizing sulfur and lithium electrodes. This review also emphasizes the fundamental Li-S chemistry mechanism and catalyst principles for improving electrochemical performance; advanced characterization technologies to monitor real-time LiPS evolution are also discussed in detail. The problems, perspectives, and challenges with respect to inhibiting the shuttle effect and dendrite growth issues as well as the practical application of Li-S batteries are also proposed.

High-Performance Poly(1-naphthylamine)/Mesoporous Carbon Cathode for Lithium-Ion Batteries with Ultralong Cycle Life of 45000 Cycles at -15 °C

Organic electrode materials for lithium-ion batteries have attracted significant attention in recent years. Polymer electrode materials, as compared to small-molecule electrode materials, have the advantage of poor solubility, which is beneficial for achieving high cycling stability. However, the severe entanglement of polymer chains often leads to difficulties in preparing nanostructured polymer electrodes, which is vital for achieving fast reaction kinetics and high utilization of active sites. This study demonstrates that these problems can be solved by the in situ electropolymerization of electrochemically active monomers in nanopores of ordered mesoporous carbon (CMK-3), combining the advantages of the nano-dispersion and nano-confinement effects of CMK-3 and the insolubility of the polymer materials. The as-prepared nanostructured poly(1-naphthylamine)/CMK-3 cathode exhibits a high active site utilization of 93.7%, ultrafast rate capability of 60 A g-1 (≈320 C), and an ultralong cycle life of 10000 cycles at room temperature and 45000 cycles at -15 °C. The study herein provides a facile and effective method that can simultaneously solve both the dissolution problem of small-molecule electrode materials and the inhomogeneous dispersion issue of polymer electrode materials.

A fluorescence biosensor based on DNA aptamers-COF for highly selective detection of ATP and thrombin

Due to their distinctive physical, chemical, electrical, and optical properties as well as their prospective uses, 2D covalent organic framework (COF) have attracted much attention. Herein, TaTPA-COF was effectively synthesized from the condensation of TTA and TFPA using a facile solvothermal method and characterized by SEM image, FT-IR spectra, and PXRD pattern. The generated bulk TaTPA-COF materials combined with DNA aptamers are utilized as the acceptor (quencher) for the highly sensitive and selective detection of adenosine 5'-triphosphate (ATP) and thrombin, with a novel fluorescence biosensing platform and a proof-of-concept application.

Electrolytes in Organic Batteries

Organic batteries using redox-active polymers and small organic compounds have become promising candidates for next-generation energy storage devices due to the abundance, environmental benignity, and diverse nature of organic resources. To date, tremendous research efforts have been devoted to developing advanced organic electrode materials and understanding the material structure-performance correlation in organic batteries. In contrast, less attention was paid to the correlation between electrolyte structure and battery performance, despite the critical roles of electrolytes for the dissolution of organic electrode materials, the formation of the electrode-electrolyte interphase, and the solvation/desolvation of charge carriers. In this review, we discuss the prospects and challenges of organic batteries with an emphasis on electrolytes. The differences between organic and inorganic batteries in terms of electrolyte property requirements and charge storage mechanisms are elucidated. To provide a comprehensive and thorough overview of the electrolyte development in organic batteries, the electrolytes are divided into four categories including organic liquid electrolytes, aqueous electrolytes, inorganic solid electrolytes, and polymer-based electrolytes, to introduce different components, concentrations, additives, and applications in various organic batteries with different charge carriers, interphases, and separators. The perspectives and outlook for the future development of advanced electrolytes are also discussed to provide a guidance for the electrolyte design and optimization in organic batteries. We believe that this review will stimulate an in-depth study of electrolytes and accelerate the commercialization of organic batteries.

Covalent Organic Frameworks for Separator Modification of Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are regarded as one of the promising energy storage systems. However, rapid capacity attenuation caused by shuttle effect of soluble polysulfides is major challenge in practical application. The separator modification is regarded as one countermeasure besides the construction of sulfur host materials. Covalent organic frameworks (COFs) are one type of outstanding candidates for suppressing shuttle effect of polysulfides. Herein, recent advances of COFs in the application as commercial separator modifiers are summarized. COFs serve as ionic sieves, the importance of porous size and surface environments in inhibiting soluble polysulfides shuttling and promoting lithium ions conduction is highlighted. The superiority of charge-neutral COFs, ionic COFs, and the composites of COFs with conductive materials for improving reversible capacity and cycling stability is demonstrated. Some new strategies for the design of COF-based separator modifiers are proposed to achieving high energy density. The review provides new perspectives for future development of high-performance Li-S batteries.

Two-Dimensional Imide-Based Covalent Organic Frameworks with Tailored Pore Functionality as Separators for High-Performance Li-S Batteries

Modifying the separator of lithium-sulfur batteries (LSBs) is considered to be one of the most effective strategies for relieving the notorious polysulfide shuttle effect. Constructing a stable, lightweight, and effective LSB separator is still a big challenge but highly desirable. Herein, a stable and lightweight imide-based covalent organic framework (COF-TpPa) is facilely fabricated on reduced graphene oxide (rGO) through an oxygen-free solvothermal technique. With the directing effect of rGO and changing the side functional group of the monomer, the morphology and the pore tailoring of COF-TpPa can be simultaneously achieved and two-dimensional (2D) COF nanosheets with different functionalities (such as -SO₃H and -Cl) are successfully constructed on rGO films. The specific functional groups inside the COF's pore channels and the narrowed pore size result in efficient absorption and restriction of Li₂S_n for weakening the "shuttle effect". Meanwhile, the 2D COF nanosheets on the rGO is a favorable morphology for better exploiting pores inside the COF materials. As a result, the COF-SO₃H-modified separator, consisting of rGO and COF-TpPa-SO₃H, exhibits a high specific capacity (1163.4 mA h/g at 0.2 C) and a desirable cyclic performance (60.2% retention rate after 1000 cycles at 2.0 C) for LSBs. Our study provides a feasible strategy to rationally design functional COFs and boosts their applications in various energy storage systems.

In Situ Synthesis of Organopolysulfides Enabling Spatial and Kinetic Co-Mediation of Sulfur Chemistry

Li-S batteries have been regarded as one of the most promising alternatives of the next-generation Li batteries. However, the dissolution and shuttling of lithium polysulfides lead to low cycle stability and low Coulombic efficiency, which intensively hinder the practical application of Li-S batteries. Herein, we propose a strategy to simultaneously promote the redox kinetics and inhibit the shuttle of lithium polysulfides, through in situ synthesis of insoluble organopolysulfides by adding a special additive. Attractively, the thus-formed insoluble organopolysulfides in the form of nanoparticle aggregates are also capable of adsorbing unconverted lithium polysulfides and hence effectively spatially suppress the shuttle effect. Furthermore, the organopolysulfides served as active redox mediators, showing faster redox kinetics of S chemistry than that of lithium polysulfides. As a result, the Li-S batteries showed impressive capacity, improved rate performance, and long cycling stability even under lean-electrolyte and high sulfur loading conditions.

Controlled Growth and Self-Assembly of Multiscale Organic Semiconductor

Currently, organic semiconductors (OSs) are widely used as active components in practical devices related to energy storage and conversion, optoelectronics, catalysis, and biological sensors, etc. To satisfy the actual requirements of different types of devices, chemical structure design and self-assembly process control have been synergistically performed. The morphology and other basic properties of multiscale OS components are governed on a broad scale from nanometers to macroscopic micrometers. Herein, the up-to-date design strategies for fabricating multiscale OSs are comprehensively reviewed. Related representative works are introduced, applications in practical devices are discussed, and future research directions are presented. Design strategies combining the advances in organic synthetic chemistry and supramolecular assembly technology perform an integral role in the development of a new generation of multiscale OSs.

Effects of the Separator MOF-Al2O3 Coating on Battery Rate Performance and Solid-Electrolyte Interphase Formation

Metal organic frameworks (MOFs) have unique advantages in optimizing the ionic conductivity of battery separators because of their rich cavity structure and highly ordered and connected pores. In this study, we used a hydrothermal method to synthesize a functional material, Ag-MOF crystal, as a separator coating content, and then studied the properties and application effect of the MOF-Al₂O₃-blended coating applying to a polyethylene (PE) separator (MOF_xAl_1-x/PE). Results show that MOF_0.08Al_0.92/PE (MOF/Al₂O₃ = 0.08:0.92) used in NCM811||Li cells significantly not only improves the fast charge-discharge performance of the cells but also inhibits the growth of lithium dendrites during long-term charge-discharge cycling; the Li⁺ transference number (t_Li⁺) of the MOF_0.08Al_0.92/PE composite separator is 0.61; the Li||separator||Li half-cell circulates stably for 1000 h at varying current density from 0.5 to 10 mA cm^-2 and only produces low overpotentials, indicating that MOF_0.08Al_0.92 stabilizes lithium. The initial capacity of the NCM811||Li cell using the MOF_0.08Al_0.92/PE separator is 165.0 mA h g^-1, its capacity retention is 70.67% after 300 cycles at 5 C, and the interface resistance of the cells only increases from 13.8 to 31.5 Ω, whereas the capacity retention of Al₂O₃/PE separator batteries is only 40.41% (62.2 mA h g^-1) under the same conditions. During the charge-discharge cycling, the MOF-Al₂O₃ coating induces the lithium anode to quickly form a stable and dense solid-electrolyte interphase layer, promotes the uniform deposition of Li⁺, and inhibits the growth of lithium dendrites as well.

Cross-Linked PVA/HNT Composite Separator Enables Stable Lithium-Organic Batteries under Elevated Temperature

Li-organic batteries (LOBs) are promising advanced battery systems because of their unique advantages in capacity, cost, and sustainability. However, the shuttling effect of soluble organic redox intermediates and the intrinsic dissolution of small-molecular electrodes have hindered the practical application of these cells, especially under high operating temperatures. Herein, a cross-linked membrane with abundant negative charge for high-temperature LOBs is prepared via electrospinning of poly(vinyl alcohol) containing halloysite nanotubes (HNTs). The translocation of negatively charged organic intermediates can be suppressed by the electronic repulsion and the cross-linked network while the positively charged Li⁺ are maintained, which is attributed to the intrinsic electronegativity of HNTs and their well-organized and homogeneous distribution in the PVA matrix. A battery using a PVA/HNT composite separator (EPH-10) and an anthraquinone (AQ) cathode exhibits a high initial discharge capacity of 231.6 mAh g^-1 and an excellent cycling performance (91.4% capacity retention, 300 cycles) at 25 °C. Even at high temperatures (60 and 80 °C), its capacity retention is more than 89.2 and 80.4% after 100 cycles, respectively. Our approach demonstrates the potential of the EPH-10 composite membrane as a separator for high-temperature LOB applications.

2D Polymer Nanosheets for Membrane Separation

Since the discovery of single-layer graphene in 2004, the family of 2D inorganic nanosheets is considered as ideal membrane materials due to their ultrathin atomic thickness and fascinating physicochemical properties. However, the intrinsically nonporous feature of 2D inorganic nanosheets hinders their potential to achieve a higher flux to some extent. Recently, 2D polymer nanosheets, originated from the regular and periodic covalent connection of the building units in 2D plane, have emerged as promising candidates for preparing ultrafast and highly selective membranes owing to their inherently tunable and ordered pore structure, light weight, and high specific surface. In this review, the synthetic methodologies (including top-down and bottom-up methods) of 2D polymer nanosheets are first introduced, followed by the summary of 2D polymer nanosheets-based membrane fabrication as well as membrane applications in the fields of gas separation, water purification, organic solvent separation, and ion exchange/transport in fuel cells and lithium-sulfur batteries. Finally, based on their current achievements, the authors' personal insights are put forward into the existing challenges and future research directions of 2D polymer nanosheets for membrane separation. The authors believe this comprehensive review on 2D polymer nanosheets-based membrane separation will definitely inspire more studies in this field.

Soluble Organic Cathodes Enable Long Cycle Life, High Rate, and Wide-Temperature Lithium-Ion Batteries

Organic electrode materials free of rare transition metal elements are promising for sustainable, cost-effective, and environmentally benign battery chemistries. However, severe shuttling effect caused by the dissolution of active materials in liquid electrolytes results in fast capacity decay, limiting their practical applications. Here, using a gel polymer electrolyte (GPE) that is in situ formed on Nafion-coated separators, the shuttle reaction of organic electrodes is eliminated while maintaining the electrochemical performance. The synergy of physical confinement by GPE with tunable polymer structure and charge repulsion of the Nafion-coated separator substantially prevents the soluble organic electrode materials with different molecular sizes from shuttling. A soluble small-molecule organic electrode material of 1,3,5-tri(9,10-anthraquinonyl)benzene demonstrates exceptional electrochemical performance with an ultra-long cycle life of 10 000 cycles, excellent rate capability of 203 mAh g^-1 at 100 C, and a wide working temperature range from -70 to 100 °C based on the solid-liquid conversion chemistry, which outperforms all previously reported organic cathode materials. The shielding capability of GPE can be designed and tailored toward organic electrodes with different molecular sizes, thus providing a universal resolution to the shuttling effect that all soluble electrode materials suffer.

Ion-Selective Covalent Organic Framework Membranes as a Catalytic Polysulfide Trap to Arrest the Redox Shuttle Effect in Lithium-Sulfur Batteries

In the wake of shaping the energy future through materials innovation, lithium-sulfur batteries (LSBs) are top-of-the-line energy storage system attributed to their high theoretical energy density and specific capacity inclusive of low material costs. Despite their strengths, LSBs suffer from the cross-over of soluble polysulfide redox species to the anode, entailing fast capacity fading and inferior cycling stability. Adding to the concern, the insulating character of polysulfides lends to sluggish reaction kinetics. To address these challenges, we construct optimized polysulfide blockers-cum-conversion catalysts by accommodating the battery separator with covalent organic framework@Graphene (COF@G) composites. We settle on a crystalline TAPP-ETTB COF in the interest of its nitrogen-enriched scaffold with a regular pore geometry, providing ample lithiophilic sites for strong chemisorption and catalytic effect to polysulfides. On another front, graphene enables high electron mobility, boosting the sulfur redox kinetics. Consequently, a lithium-sulfur battery with a TAPP-ETTB COF@G-based separator demonstrates a high reversible capacity of 1489.8 mA h g^-1 at 0.2 A g^-1 after the first cycle and good cyclic performance (920 mA h g^-1 after 400 cycles) together with excellent rate performance (827.7 mA h g^-1 at 2 A g^-1). The scope and opportunities to harness the designability and synthetic structural control in crystalline organic materials is a promising domain at the interface of sustainable materials, energy storage, and Li-S chemistry.

Fabrication of a Covalent Triazine Framework Functional Interlayer for High-Performance Lithium-Sulfur Batteries

The shuttling effect of polysulfides is one of the major problems of lithium-sulfur (Li-S) batteries, which causes rapid capacity fading during cycling. Modification of the commercial separator with a functional interlayer is an effective strategy to address this issue. Herein, we modified the commercial Celgard separator of Li-S batteries with one-dimensional (1D) covalent triazine framework (CTF) and a carbon nanotube (CNT) composite as a functional interlayer. The intertwined CTF/CNT can provide a fast lithium ionic/electronic transport pathway and strong adsorption capability towards polysulfides. The Li-S batteries with the CTF/CNT/Celgard separator delivered a high initial capacity of 1314 mAh g^-1 at 0.1 C and remained at 684 mAh g^-1 after 400 cycles^-1 at 1 C. Theoretical calculation and static-adsorption experiments indicated that the triazine ring in the CTF skeleton possessed strong adsorption capability towards polysulfides. The work described here demonstrates the potential for CTF-based permselective membranes as separators in Li-S batteries.

Dual Nanomechanics in Anisotropic Porous Covalent Organic Framework Janus-Type Thin Films

Empowered by crystalline ordered structures and homogeneous fabrication techniques, covalent organic frameworks (COFs) have been realized with uniform morphologies and isotropic properties. However, such homogeneity often hinders various surface-dependent properties observed in asymmetric nanostructures. The challenge remains to induce heterogeneity in COFs by creating an asymmetric superstructure such as a Janus thin film. In this regard, we propose a versatile yet straightforward interfacial layer-grafting strategy to fabricate free-standing Janus-type COF-graphene thin films. Herein, two-dimensional graphene sheets were utilized as the suitable grafter due to the possibility of noncovalent interactions between the layers. The versatility of the approach was demonstrated by fabricating two distinct Janus-type films, with the COF surface interwoven with nanofibers and nanospheres. The Janus-type films showcase opposing surface morphologies originating from graphene sheets and COF nanofibers or nanospheres, preserving the porosity (552-600 m² g^-1). The unique surface chemistries of the constituent layers further endow the films with orthogonal mechanical properties, as confirmed by the nanoindentation technique. Interestingly, the graphene sheets favor the Janus-type assembly of COF nanofibers over the nanospheres. This is reflected in the better nanomechanical properties of COF_fiber-graphene films (E_graphene = 300-1200 MPa; E_COF = 15-60 MPa) compared to the COF_sphere-graphene films (E_graphene = 11-14 MPa; E_COF = 2-5 MPa). These results indicate a direct relationship between the mechanical properties and homo/heterogeneity of Janus-type COF films.

Sulfur Compensation: A Promising Strategy against Capacity Decay in Li-S Batteries

Drastic capacity decay as a result of active sulfur loss caused by the severe shuttle effect of dissolved polysulfides is the main obstacle in the commercial application of Li-S batteries. Various methods have been developed to suppress the active sulfur loss, but the results are far from ideal. Herein, we propose a facile sulfur compensation strategy to improve the cyclic stability of Li-S batteries. The strategy is to compensate sulfur to the cathode by chemical reactions between additional sulfur and lithium polysulfides diffusing away from the cathode. The compensatory sulfur can effectively mitigate the loss of active sulfur in the cathode side caused by the shuttle effect and thus maintain the high capacity of the battery during charging and discharging for long life cycle assessments. Using this strategy, the specific capacity of the assembled Li-S batteries was maintained at >700 mA h g^-1 for more than 500 cycles at 1 C and >1000 mA h g^-1 for ∼100 cycles at 0.1 C, while the capacity of control batteries rapidly decreased to <200 mA h g^-1 under the same conditions.

Towards High Performance Li-S Batteries via Sulfonate-Rich COF-Modified Separator

Lithium-sulfur (Li-S) batteries are held great promise for next-generation high-energy-density devices; however, polysulfide shuttle and Li-dendrite growth severely hinders their commercial production. Herein, a sulfonate-rich COF (SCOF-2) is designed, synthesized, and used to modify the separator of Li-S batteries, providing a solution for the above challenges. It is found that the SCOF-2 features stronger electronegativity and larger interlayer spacing than that of none/monosulfonate COFs, which can facilitate the Li⁺ migration and alleviate the formation of Li-dendrites. Density functional theory (DFT) calculations and in situ Raman analysis demonstrate that the SCOF-2 possesses a narrow bandgap and strong interaction on sulfur species, thereby suppressing self-discharge behavior. As a result, the modified batteries deliver an ultralow attenuation rate of 0.047% per cycle over 800 cycles at 1 C, and excellent anti-self-discharge performance by a low-capacity attenuation of 6.0% over one week. Additionally, even with the high-sulfur-loading cathode (3.2-8.2 mg_s cm^-2 ) and lean electrolyte (5 µL mg_s ^-1 ), the batteries still exhibit ≈80% capacity retention over 100 cycles, showing great potential for practical application.

On-Surface Bottom-Up Construction of COF Nanoshells towards Photocatalytic H2 Production

The rational design of an outer shell is of great significance to promote the photocatalytic efficiency of core-shell structured photocatalysts. Herein, a covalent organic framework (COF) nanoshell was designed and deposited on the cadmium sulfide (CdS) core surface. A typical COF material, TPPA, featuring exceptional stability, was synthesized through interfacial polymerization using 1, 3, 5-triformylphloroglucinol (TP) and p-phenylenediamine (PA) as monomers. The nanoshell endows the CdS@TPPA nanosphere with ordered channels for unimpeded light-harvesting and fast diffusion of reactants/products and well-defined modular building blocks for spatially charge separation. Moreover, the heterojunction formed between CdS and TPPA can further facilitate the effective charge separation at the interface via lower exciton binding energy compared with that of pristine TPPA. By modulating the thickness of TPPA nanoshell, the CdS@TPPA nanosphere photocatalyst with the nanoshell thickness of about 8 ± 1 nm exhibits the highest photocatalytic H₂ evolution of 194.1 μmol h⁻¹ (24.3 mmol g⁻¹ h⁻¹, 8 mg), which is superior to most of the reported COF-based photocatalysts. The framework nanoshell in this work may stimulate the thinking about how to design advanced shell architecture in the core-shell structured photocatalysts to achieve coordinated charge and molecule transport.

Recent Progress in Nanoscale Covalent Organic Frameworks for Cancer Diagnosis and Therapy

Covalent organic frameworks (COFs) as a type of porous and crystalline covalent organic polymer are built up from covalently linked and periodically arranged organic molecules. Their precise assembly, well-defined coordination network, and tunable porosity endow COFs with diverse characteristics such as low density, high crystallinity, porous structure, and large specific-surface area, as well as versatile functions and active sites that can be tuned at molecular and atomic level. These unique properties make them excellent candidate materials for biomedical applications, such as drug delivery, diagnostic imaging, and disease therapy. To realize these functions, the components, dimensions, and guest molecule loading into COFs have a great influence on their performance in various applications. In this review, we first introduce the influence of dimensions, building blocks, and synthetic conditions on the chemical stability, pore structure, and chemical interaction with guest molecules of COFs. Next, the applications of COFs in cancer diagnosis and therapy are summarized. Finally, some challenges for COFs in cancer therapy are noted and the problems to be solved in the future are proposed.

1,4,5,8-Naphthalenetetracarboxylic dianhydride grafted phthalocyanine macromolecules as an anode material for lithium ion batteries

For solving the problems of high solubility in electrolytes, poor conductivity and low active site utilization of organic electrode materials, in this work, 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA) grafted nickel phthalocyanine (TNTCDA-NiPc) was synthesized and used as an anode material for lithium ion batteries. As a result, the dispersibility, conductivity and dissolution stability are improved, which is conducive to enhancing the performance of batteries. The initial discharge capacity of the TNTCDA-NiPc electrode is 859.8 mA h g^-1 at 2 A g^-1 current density, which is much higher than that of the NTCDA electrode (247.4 mA h g^-1). After 379 cycles, the discharge capacity of the TNTCDA-NiPc electrode is 1162.9 mA h g^-1, and the capacity retention rate is 135.3%, which is 7 times that of the NTCDA electrode. After NTCDA is grafted to the phthalocyanine macrocyclic system, the dissolution of the NTCDA in the electrolyte is reduced, and the conductivity and dispersion of the NTCDA and phthalocyanine ring are also improved, so that more active sites of super lithium intercalation from NTCDA and phthalocyanine rings are exposed, which results in better electrochemical performance. The strategy of grafting small molecular active compounds into macrocyclic conjugated systems used in this work can provide new ideas for the development of high performance organic electrode materials.

Ion Selective Covalent Organic Framework Enabling Enhanced Electrochemical Performance of Lithium-Sulfur Batteries

Ion selective separators with the capability of conducting lithium ion and blocking polysulfides are critical and highly desired for high-performance lithium-sulfur (Li-S) batteries. Herein, we fabricate an ion selective film of covalent organic framework (denoted as TpPa-SO₃Li) onto the commercial Celgard separator. The aligned nanochannels and continuous negatively charged sites in the TpPa-SO₃Li layer can effectively facilitate the lithium ion conduction and meanwhile significantly suppress the diffusion of polysulfides via the electrostatic interaction. Consequently, the TpPa-SO₃Li layer exhibits excellent ion selectivity with an extremely high lithium ion transference number of 0.88. When using this novel functional layer, the Li-S batteries with a high sulfur loading of 5.4 mg cm^-2 can acquire a high initial capacity of 822.9 mA h g^-1 and high retention rate of 78% after 100 cycles at 0.2 C. This work provides new insights into developing high-performance Li-S batteries via ion selective separator strategy.

A TiS2/Celgard separator as an efficient polysulfide shuttling inhibitor for high-performance lithium-sulfur batteries

The rapid capacity loss caused by the shuttling effect of polysulfides is one of the great challenges of Li-S batteries. In this work, we adopted a simple solid-phase sintering method to synthesize titanium disulfide (TiS2) and further demonstrated it as a superior modifier of separators for Li-S batteries. Two commonly adopted modification processes of separators, including vacuum filtration (VF) and slurry casting (SC) have been used to prepare TiS2/Celgard separators. TiS2-VF/Celgard can better restrain the polysulfide shuttling effect compared with TiS2-SC/Celgard. A TiS2-VF/Celgard-based Li-S battery has a reversible capacity of 771.6 mA h g-1, with a capacity retention of 645.6 mA h g-1 after 500 cycles at 2.0 C, corresponding to a capacity fading rate of ∼0.033% per cycle. This study has shown the potential of TiS2 as a multifunctional modifier of separators for high performance and long cycle life Li-S batteries.

Designing High Performance Organic Batteries

ConspectusRedox active organic and polymeric materials have witnessed the rapid development and commercialization of lithium-ion batteries (LIBs) over the last century and the increasing interest in developing various alternatives to LIBs in the past 30 years. As a kind of potential alternative, organic and polymeric materials have the advantages of flexibility, tunable performance through molecular design, potentially high specific capacity, vast natural resources, and recyclability. However, until now, only a handful inorganic materials have been adopted as electrodes in commercialized LIBs. Although the development of carbonyl-based materials revived organic batteries and stimulated plentiful organic materials for batteries in the past 10 years due to their high theoretical capacities and long-term cycleabilities compared with their pioneers (e.g., conducting polymers), organic batteries are still facing many challenges. For example, it is still essential to enhance the theoretical and experimental capacities of organic materials. Moreover, typically, organic materials suffer relatively low conductivity, which limits their rate capability. In addition, many organic materials, especially small molecules, show poor cycling stability because of their dissolution in organic electrolytes. Other requirements, such as high voltage output and low cost, are also crucial for organic batteries. Therefore, insights into fundamentals (e.g., intramolecular and intermolecular interactions) for a deep understanding of organic batteries and constructive strategies ranging from material design to manipulation of other components (e.g., conductive additives, binders, electrolytes, and separators through controlling the intramolecular and intermolecular interactions and manipulating the ionic transport) are of great significance to boost the performance of organic batteries.In this Account, we give an overview of our efforts to develop high performance organic batteries with various strategies from the aspects of molecular design and the manipulation of other components. Inspired by the experience in organic electronics, we proposed that the extension of the π-conjugated system is helpful for stabilizing the +1/-1 charge/discharge states, improving the charge transport, and facilitating the layered packing (good for ionic diffusion) and hence would benefit the rate capability and cyclability. The π-d conjugation can effectively improve the electrical conductivity and provide stable and fast ionic storage, which enriches the materials for high-performance batteries and further deepens the understanding of conjugated coordination polymers (CCPs). Different from inorganic materials, organic materials are composed of molecules (either small molecules, macromolecules, or polymeric molecules) with weak intermolecular interactions. Therefore, the manipulation of active molecules or additives (conductive additives, binders, and other special additives) through control of intermolecular interactions is crucial for enhancing the electrochemical performance of organic batteries. Regarding the possible dissolution of active materials, the modification of separators through addition of selectively permeable membranes as ionic sieves is the most efficient and universal strategy to mitigate the shuttling of dissolved molecules but allow smaller sized cations to pass and hence is able to enhance the cyclability. On the basis of these findings, the challenges and several future trends for organic batteries are discussed. This Account provides a summary of our recent progress, understanding of the fundamentals for high performance organic batteries, insight into the intramolecular and intermolecular interactions, and prospects for future development of organic materials for next-generation rechargeable batteries.

Covalent organic framework photocatalysts: structures and applications

In the light of increasing energy demand and environmental pollution, it is urgently required to find a clean and renewable energy source. In these years, photocatalysis that uses solar energy for either fuel production, such as hydrogen evolution and hydrocarbon production, or environmental pollutant degradation, has shown great potential to achieve this goal. Among the various photocatalysts, covalent organic frameworks (COFs) are very attractive due to their excellent structural regularity, robust framework, inherent porosity and good activity. Thus, many studies have been carried out to investigate the photocatalytic performance of COFs and COF-based photocatalysts. In this critical review, the recent progress and advances of COF photocatalysts are thoroughly presented. Furthermore, diverse linkers between COF building blocks such as boron-containing connections and nitrogen-containing connections are summarised and compared. The morphologies of COFs and several commonly used strategies pertaining to photocatalytic activity are also discussed. Following this, the applications of COF-based photocatalysts are detailed including photocatalytic hydrogen evolution, CO₂ conversion and degradation of environmental contaminants. Finally, a summary and perspective on the opportunities and challenges for the future development of COF and COF-based photocatalysts are given.

Toward Stable Lithium Plating/Stripping by Successive Desolvation and Exclusive Transport of Li Ions

Li has been regarded as the most attractive anode for next-generation high-energy-density batteries due to its high specific capacity and low electrochemical potential. However, its low electrochemical potential leads to the side reaction of Li with the solvent of the electrolyte (the solvation of Li ions exacerbates the reaction). This adverse side reaction results in uneven Li distribution and deposition, low Coulombic efficiency, and the formation of Li dendrites. Herein, we demonstrate an efficient method for achieving successive desolvation and homogeneous distribution of Li ions by using a double-layer membrane. The first layer is designed to enable the desolvation of Li ions. The second layer with controllable and ordered nanopores is expected to facilitate the homogeneous and exclusive transport of Li ions. The efficiency of the double-layer membrane on desolvation and exclusive transport of Li ions is confirmed by theoretical calculations, the significantly enhanced Li-ion transference number, improved Coulombic efficiency, and the inhibition of Li dendrites. These results will deepen our understanding of the modulation of ions and pave a way to the next-generation high-energy-density Li-metal batteries.

Nitrogen-rich covalent organic frameworks with multiple carbonyls for high-performance sodium batteries

Covalent organic frameworks with designable periodic skeletons and ordered nanopores have attracted increasing attention as promising cathode materials for rechargeable batteries. However, the reported cathodes are plagued by limited capacity and unsatisfying rate performance. Here we report a honeycomb-like nitrogen-rich covalent organic framework with multiple carbonyls. The sodium storage ability of pyrazines and carbonyls and the up-to twelve sodium-ion redox chemistry mechanism for each repetitive unit have been demonstrated by in/ex-situ Fourier transform infrared spectra and density functional theory calculations. The insoluble electrode exhibits a remarkably high specific capacity of 452.0 mAh g-1, excellent cycling stability (~96% capacity retention after 1000 cycles) and high rate performance (134.3 mAh g-1 at 10.0 A g-1). Furthermore, a pouch-type battery is assembled, displaying the gravimetric and volumetric energy density of 101.1 Wh kg-1cell and 78.5 Wh L-1cell, respectively, indicating potentially practical applications of conjugated polymers in rechargeable batteries.

Bulk COFs and COF nanosheets for electrochemical energy storage and conversion

The current advances, structure-property relationship and future perspectives in covalent organic frameworks (COFs) and their nanosheets for electrochemical energy storage (EES) and conversion (EEC) are summarized.

Improving Covalent Organic Frameworks Fluorescence by Triethylamine Pinpoint Surgery as Selective Biomarker Sensor for Diabetes Mellitus Diagnosis

The nitrogen-containing imine or hydrazone linked covalent organic frameworks (COFs) are poorly luminescent due to the fluorescence quenching by nitrogen atoms in the linkages, even if highly luminescent units and linkers are employed. The fluorescence quenching pathway to prevent linkage-originated to mitigate the inherent limitations of the linkage is a promising method for luminescent COFs. The generation of N^- by deprotonation of the N-H unit eliminates the electron transfer from N lone pair to COF (TpPa-1) and enhances the luminescence. In this work, TpPa-1 achieved turn-on luminescence response with good sensitivity and reproducibility toward triethylamine (TEA) vapor in the process of deprotonation. The fabricated detector offers a viable approach for sensing ppm-level TEA, which can remind people to take timely measures to reduce the environmental hazards caused by TEA. The fluorescent sensor TpPa-1@LE constructed by the products of TpPa-1 and TEA can quantitatively trace biomarker methylglyoxal (MGO) for diabetes mellitus diagnosis in serum system. Furthermore, using TEA and MGO as input signals and the two fluorescence emissions G476 and Y525 as output signals, an advanced analytical device based on two Boolean logic gates with INH and AND function is constructed. This work provides a new strategy for improving the weak luminescence of COF in aqueous solution and realizes selective response to biomarker (MGO) for diabetes mellitus diagnosis.