Highly Active Cobalt‐Based Electrocatalysts with Facile Incorporation of Dopants for the Oxygen Evolution Reaction

Altering electronic structure of nickel foam supported CoNi-based oxide through Al ions modulation for efficient oxygen evolution reaction

Developing highly active and durable non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER) is crucial in achieving efficient energy conversion. Herein, we reported a CoNiAl0.5O/NF nanofilament that exhibits higher OER activity than previously reported IrO2-based catalysts in alkaline solution. The as-synthesized CoNiAl0.5O/NF catalyst demonstrates a low overpotential of 230 mV at a current density of 100 mA cm-2, indicating its high catalytic efficiency. Furthermore, the catalyst exhibits a Tafel slope of 26 mV dec-1, suggesting favorable reaction kinetics. The CoNiAl0.5O/NF catalyst exhibits impressive stability, ensuring its potential for practical applications. Detailed characterizations reveal that the enhanced activity of CoNiAl0.5O/NF can be attributed to the electronic modulation achieved through Al3+ incorporation, which promotes the emergence of higher-valence Ni metal, facilitating nanofilament formation and improving mass transport and charge transfer processes. The synergistic effect between nanofilaments and porous nickel foam (NF) substrate significantly enhances the electrical conductivity of this catalyst material. This study highlights the significance of electronic structures for improving the activity of cost-effective and non-precious metal-based electrocatalysts for the OER.

Alkaline Water Electrolysis for Green Hydrogen Production

ConspectusThe global energy landscape is undergoing significant change. Hydrogen is seen as the energy carrier of the future and will be a key element in the development of more sustainable industry and society. However, hydrogen is currently produced mainly from fossil fuels, and this needs to change. Alkaline water electrolysis with advanced technology has the most significant potential for this transition to produce large-scale green hydrogen by utilizing renewable energy. The assembly of industrial electrolyzer plants is more complex on a larger scale, but it follows a basic working principle, which involves two half-cells of anode and cathode sites where the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) occur. Out of the two reactions, the OER is more challenging both thermodynamically and kinetically. Besides having access to renewable electricity, developing durable and abundant electrocatalysts for the OER remains a challenge in large-scale alkaline water electrolysis. Among different physicochemical properties, the electrocatalyst surface and its interaction with water and reaction intermediates, as well as formed molecular hydrogen and oxygen, play an essential role in the catalytic performance and the reaction mechanism. In particular, the binding strengths between the catalyst surface and intermediates determine the rate-limiting step and electrocatalytic performance.This Account gives some insights into the status of the hydrogen economy and basic principles of alkaline water electrolysis by covering its fundamentals as well as industrial developments. Further, the HER and OER reaction mechanisms of alkaline water electrolysis and selected electrocatalyst progress for both half-reactions are briefly discussed. The Adsorbate Evolution Mechanism and the Lattice Oxygen Mechanism for the OER are explained with specific references. This Account also deliberates on the author's selected contributions to the development of transition metal-based electrocatalysts for alkaline water electrolysis with an emphasis on OER. The focus is particularly given to the enhancement of intrinsic activity, the role of eg-filling, phase segregation, and defect structure of cobalt-based electrocatalysts for OER. Structural modification and phase transformation of the cobalt oxide electrocatalyst under working conditions are further deliberated. In addition, the creation of new active surface species and the activation of cobalt- and nickel-based electrocatalysts through iron uptake from the alkaline electrolyte are discussed. In the end, this Account provides a brief overview of challenges related to large-scale production and utilization of green hydrogen.

Reconstruction of CoNx /NC Catalyst during Oxygen Evolution Reaction by Fe3+ Modulation for Enhanced Activity and Stability

The surface reconstruction of transition metal-based catalysts has been demonstrated to be beneficial for oxygen evolution reaction (OER). However, regulating the activity and stability of the components derived from reconstruction is challenging. Here, a strategy of Fe3+ ion modulating the reconstruction components of CoN0.4 on a nitrogen-doped carbon carrier(CoN0.4 /NC) electrocatalyst for promoted OER activity and stability is reported. During the OER process, the cobalt nitride components on the surface of CoN0.4 /NC catalyst were converted into CoOOH and Co4+ species. The addition of Fe3+ stabilized the CoOOH phase and facilitated the formation of Fe-CoOOH active phase, enhancing the activity and stability of CoN0.4 /NC. The Fe10 -CoN0.4 /NC catalyst achieved a current density of 10 mA cm-2 at a low overpotential of 300 mV (vs. RHE) with a Tafel slope of 68.12 mV dec-1 . The overpotential of Fe10 -CoN0.4 /NC was 122 mV lower than that of the CoN0.4 /NC catalyst and was comparable to commercial RuO2 catalyst. This study develops a novel technology for regulating the production of reconstructed species using Fe3+ ions.

Edge-Sharing Octahedrally Coordinated NiFe Dual Active Sites on ZnFe2 O4 for Photoelectrochemical Water Oxidation

The structural properties of octahedral sites (B_Oh ) in spinel oxides (AB₂ O₄ ) play vital roles in the electrochemical performance of oxygen-related reactions. However, the precise manipulation of AB₂ O₄ remains challenging due to the complexity of their crystal structure. Here, a simple and versatile molten-salt-mediated strategy is reported to introduce Ni²⁺ in B_oh sites intentionally on the surface of zinc ferrite (ZnFe₂ O₄ , ZFO) to promote the active sites for photoelectrochemical (PEC) water splitting. The as-created photoanode (ZFO-MSNi) shows a remarkable cathodic shift of ≈ 450 mV (turn-on voltage of ≈ 0.6 V_RHE ) as well as three times the 1-sun photocurrent density at 1.23 V_RHE for PEC water oxidation in comparison with bare ZFO. A comprehensive structural characterization clearly reveals the local structure of the introduced Ni²⁺ in ZFO-MSNi. Fewer surface trapping states are observed while the precisely introduced Ni²⁺ and associated neighboring Fe^(3-σ)+ (0<σ<1) sites unite in an edge-sharing octahedral configuration to function as NiFe dual active sites for PEC water oxidation. Moreover, open circuit potential measurements and rapid-scan voltammetry investigation give further insight into the enhanced PEC performance. Overall, this work displays a versatile strategy to regulate the surface active sites of photoelectrodes for increasing performance in PEC solar energy conversion systems.

Electronic tuning of Ni-Fe-Co oxide/hydroxide as highly active electrocatalyst for rechargeable Zn-air batteries

As a bifunctional oxygen electrocatalyst (oxygen reduction reaction (ORR) and oxygen evolution reaction (OER)), spinel copper cobaltite (CuCo₂O₄) is attracting significant research interest owing to the tailored Co, Cu electronic structure and ease of adjusting the electrochemically active area. However, its poor OER performance (>300 mV at 10 mA cm^-2) limits its practical application for rechargeable zinc-air batteries. Therefore, we construct a CuCo₂O₄/NiFe LDH oxide/hydroxide interface to tune the properties of Ni, Fe and Co for enhancing OER activity and decreasing the charging overpotential of rechargeable zinc-air batteries. The obtained electrocatalysts show a low overpotential of 251 mV (10 mA cm^-2), which is 91 mV lower than the overpotential (342 mV) of CuCo₂O₄. By in situ Raman, XPS and electrochemical analyses, we ascribe the enhanced OER activity to the increasing Ni/Fe oxidation state triggered by the charge transfer of Ni/Fe and Co, which prompts CuCo₂O₄/NiFe LDH to rapidly form an active surface layer. Benefiting from enhanced OER performance, zinc-air batteries with a CuCo₂O₄/NiFe LDH electrode display a high round-trip efficiency with a low voltage gap of ∼0.78 V (10 mA cm^-2) due to the obvious decrease in the charging overpotential. These results suggest the importance of tuning the charge transfer on interfaces for designing high-efficiency electrocatalysts.

Advancing Critical Chemical Processes for a Sustainable Future: Challenges for Industry and the Max Planck–Cardiff Centre on the Fundamentals of Heterogeneous Catalysis (FUNCAT)

Catalysis is involved in around 85 % of manufacturing industry and contributes an estimated 25 % to the global domestic product, with the majority of the processes relying on heterogeneous catalysis. Despite the importance in different global segments, the fundamental understanding of heterogeneously catalysed processes lags substantially behind that achieved in other fields. The newly established Max Planck-Cardiff Centre on the Fundamentals of Heterogeneous Catalysis (FUNCAT) targets innovative concepts that could contribute to the scientific developments needed in the research field to achieve net zero greenhouse gas emissions in the chemical industries. This Viewpoint Article presents some of our research activities and visions on the current and future challenges of heterogeneous catalysis regarding green industry and the circular economy by focusing explicitly on critical processes. Namely, hydrogen production, ammonia synthesis, and carbon dioxide reduction, along with new aspects of acetylene chemistry.

Phase Segregation in Cobalt Iron Oxide Nanowires toward Enhanced Oxygen Evolution Reaction Activity

The impact of reduction post-treatment and phase segregation of cobalt iron oxide nanowires on their electrochemical oxygen evolution reaction (OER) activity is investigated. A series of cobalt iron oxide spinel nanowires are prepared via the nanocasting route using ordered mesoporous silica as a hard template. The replicated oxides are selectively reduced through a mild reduction that results in phase transformation as well as the formation of grain boundaries. The detailed structural analyses, including the ⁵⁷Fe isotope-enriched Mössbauer study, validated the formation of iron oxide clusters supported by ordered mesoporous CoO nanowires after the reduction process. This affects the OER activity significantly, whereby the overpotential at 10 mA/cm² decreases from 378 to 339 mV and the current density at 1.7 V vs RHE increases by twofold from 150 to 315 mA/cm². In situ Raman microscopy revealed that the surfaces of reduced CoO were oxidized to cobalt with a higher oxidation state upon solvation in the KOH electrolyte. The implementation of external potential bias led to the formation of an oxyhydroxide intermediate and a disordered-spinel phase. The interactions of iron clusters with cobalt oxide at the phase boundaries were found to be beneficial to enhance the charge transfer of the cobalt oxide and boost the overall OER activity by reaching a Faradaic efficiency of up to 96%. All in all, the post-reduction and phase segregation of cobalt iron oxide play an important role as a precatalyst for the OER.

Incorporation of Cu/Ni in Ordered Mesoporous Co-Based Spinels to Facilitate Oxygen Evolution and Reduction Reactions in Alkaline Media and Aprotic Li-O2 Batteries

Ordered mesoporous CuNiCo oxides were prepared via nanocasting with varied Cu/Ni ratio to establish its impact on the electrochemical performance of the catalysts. Physicochemical properties were determined along with the electrocatalytic activities toward oxygen evolution/reduction reactions (OER/ORR). Combining Cu, Ni, and Co allowed creating active and stable bifunctional electrocatalysts. CuNiCo oxide (Cu/Ni≈1 : 4) exhibited the highest current density of 411 mA cm^-2 at 1.7 V vs. reversible hydrogen electrode (RHE) and required the lowest overpotential of 312 mV to reach 10 mA cm^-2 in 1 m KOH after 200 cyclic voltammograms. OER measurements were also conducted in the purified 1 m KOH, where CuNiCo oxide (Cu/Ni≈1 : 4) also outperformed NiCo oxide and showed excellent chemical and catalytic stability. For ORR, Cu/Ni incorporation provided higher current density, better kinetics, and facilitated the 4e^- pathway of the oxygen reduction reaction. The tests in Li-O₂ cells highlighted that CuNiCo oxide can effectively promote ORR and OER at a lower overpotential.

Cation-Tuning Induced d-Band Center Modulation on Co-based Spinel Oxide for Rechargeable Zn-Air Batteries

Atomic substitutions at the tetrahedral site (A Td ) could theoretically achieve an efficient optimization of the charge at the octahedral site (B Oh ) through the A Td -O-B Oh interactions in the spinel oxides (AB2O4). However, the precise control and adjustment of the spinel oxides are still challenging owing to the complexity of their crystal structure. In this work, we demonstrate a simple solvent method to tailor the structures of spinel oxides and further use the spinel oxide composites (ACo2O4/NCNTs, A = Mn, Co, Ni, Cu, Zn) for oxygen electrocatalysis. And the optimized MnCo2O4/NCNTs exhibit high activity and excellent durability for oxygen reduction/evolution reactions. Remarkably, the rechargeable liquid Zn-air battery equipped the MnCo2O4/NCNTs cathode affords a specific capacity of 827 mAh gZn-1 with high power density of 74.63 mW cm-2 and no voltage degradation after 300 cycles at a high charging-discharging rate (5 mA cm-2). The density functional theory (DFT) calculations reveal that the substitution could regulate the ratio of Co3+/Co2+ and thereby lead to the electronic structure modulated accompanied with the movement of d-band center. The tetrahedral and octahedral sites interact through the Mn-O-Co, the Co3+ Oh of MnCo2O4 with the optimal charge structure allows more suitable binding interaction between the active center and the oxygenated species, resulting in superior oxygen electrocatalytic performance. This work not only proves the influence of the charge modulation mechanism on the oxygen catalysis process but also provides novel strategies for the subsequent design of other oxygen catalysis materials.

The Roles of Composition and Mesostructure of Cobalt-Based Spinel Catalysts in Oxygen Evolution Reactions

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co₃ O₄ , MgCo₂ O₄ , Co₂ FeO₄ , Co₂ AlO₄ and CoFe₂ O₄ . The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H₂ O₂ decomposition. Studying the effect of dominant surface termination, isotropic Co₃ O₄ and CoFe₂ O₄ catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co³⁺ plays the major role for high activity. In H₂ O₂ decomposition, Co²⁺ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction.

Carbon-Based Composites as Electrocatalysts for Oxygen Evolution Reaction in Alkaline Media

This review paper presents the most recent research progress on carbon-based composite electrocatalysts for the oxygen evolution reaction (OER), which are of interest for application in low temperature water electrolyzers for hydrogen production. The reviewed materials are primarily investigated as active and stable replacements aimed at lowering the cost of the metal electrocatalysts in liquid alkaline electrolyzers as well as potential electrocatalysts for an emerging technology like alkaline exchange membrane (AEM) electrolyzers. Low temperature electrolyzer technologies are first briefly introduced and the challenges thereof are presented. The non-carbon electrocatalysts are briefly overviewed, with an emphasis on the modes of action of different active phases. The main part of the review focuses on the role of carbon–metal compound active phase interfaces with an emphasis on the synergistic and additive effects. The procedures of carbon oxidative pretreatment and an overview of metal-free carbon catalysts for OER are presented. Then, the successful synthesis protocols of composite materials are presented with a discussion on the specific catalytic activity of carbon composites with metal hydroxides/oxyhydroxides/oxides, chalcogenides, nitrides and phosphides. Finally, a summary and outlook on carbon-based composites for low temperature water electrolysis are presented.

Doping regulation in transition metal compounds for electrocatalysis

In electrocatalysis, doping regulation has been considered as an effective method to modulate the active sites of catalysts, providing a powerful means for creating a large variety of highly efficient catalysts for various reactions. Of particular interest, there has been growing research concerning the doping of two-dimensional transition-metal compounds (TMCs) to optimize their electrocatalytic performance. Despite the previous achievements, mechanistic insights of doping regulation in TMCs for electrocatalysis are still lacking. Herein, we provide a systematic overview of doping regulation in TMCs in terms of background, preparation, impacts on physicochemical properties, and typical applications including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, CO₂ reduction reaction, and N₂ reduction reaction. Notably, we bridge the understanding between the doping regulation of catalysts and their catalytic activities via focusing on the physicochemical properties of catalysts from the aspects of vacancy concentrations, phase transformation, surface wettability, electrical conductivity, electronic band structure, local charge distribution, tunable adsorption strength, and multiple adsorption configurations. We also discuss the existing challenges and future perspectives in this promising field.

A Highly-Efficient Oxygen Evolution Electrocatalyst Derived from a Metal-Organic Framework and Ketjenblack Carbon Material

The composite of the metal-organic framework (MOF) Ni(Fe)-MOF-74 and the highly conductive carbon material ketjenblack (KB) could be easily obtained from the in-situ MOF synthesis in a one-step solvothermal reaction. The composite material features a remarkable electrochemical oxygen evolution reaction (OER) performance where the overpotential at 10 mA/cm2 and the current density at 1.7 VRHE are recorded as 0.274 VRHE and 650 mA/cm2 , respectively, in 1 mol/L KOH. In particular, the activation of nickel-iron clusters from the MOF under an applied anodic bias steadily boosts the OER performance. Although Ni(Fe)-MOF-74 goes through some structural modification during the electrochemical measurements, the stabilized and optimized composite material shows excellent OER performance. This simple strategy to design highly-efficient electrocatalysts, utilizing readily available precursors and carbon materials, will leverage the use of diverse metal-organic complexes into electrode fabrication with a high energy conversion efficiency.

Principles of Water Electrolysis and Recent Progress in Cobalt-, Nickel-, and Iron-Based Oxides for the Oxygen Evolution Reaction

Water electrolysis that results in green hydrogen is the key process towards a circular economy. The supply of sustainable electricity and availability of oxygen evolution reaction (OER) electrocatalysts are the main bottlenecks of the process for large‐scale production of green hydrogen. A broad range of OER electrocatalysts have been explored to decrease the overpotential and boost the kinetics of this sluggish half‐reaction. Co‐, Ni‐, and Fe‐based catalysts have been considered to be potential candidates to replace noble metals due to their tunable 3d electron configuration and spin state, versatility in terms of crystal and electronic structures, as well as abundance in nature. This Review provides some basic principles of water electrolysis, key aspects of OER, and significant criteria for the development of the catalysts. It provides also some insights on recent advances of Co‐, Ni‐, and Fe‐based oxides and a brief perspective on green hydrogen production and the challenges of water electrolysis.

Regulating Fe-spin state by atomically dispersed Mn-N in Fe-N-C catalysts with high oxygen reduction activity

As low-cost electrocatalysts for oxygen reduction reaction applied to fuel cells and metal-air batteries, atomic-dispersed transition metal-nitrogen-carbon materials are emerging, but the genuine mechanism thereof is still arguable. Herein, by rational design and synthesis of dual-metal atomically dispersed Fe,Mn/N-C catalyst as model object, we unravel that the O₂ reduction preferentially takes place on Fe^III in the FeN₄ /C system with intermediate spin state which possesses one e_g electron (t_2g4e_g1) readily penetrating the antibonding π-orbital of oxygen. Both magnetic measurements and theoretical calculation reveal that the adjacent atomically dispersed Mn-N moieties can effectively activate the Fe^III sites by both spin-state transition and electronic modulation, rendering the excellent ORR performances of Fe,Mn/N-C in both alkaline and acidic media (halfwave positionals are 0.928 V in 0.1 M KOH, and 0.804 V in 0.1 M HClO₄), and good durability, which outperforms and has almost the same activity of commercial Pt/C, respectively. In addition, it presents a superior power density of 160.8 mW cm⁻² and long-term durability in reversible zinc–air batteries. The work brings new insight into the oxygen reduction reaction process on the metal-nitrogen-carbon active sites, undoubtedly leading the exploration towards high effective low-cost non-precious catalysts.

The working mechanism of several low-cost electrocatalyst materials is still arguable. Here the authors show a model Fe,Mn/N-C catalyst where the oxygen reduction preferentially takes place on Fe(III) sites with the intermediate spin state (t2g4 eg1) caused by the adjacent Mn-N moieties.

Tunable eg Orbital Occupancy in Heusler Compounds for Oxygen Evolution Reaction*

Heusler compounds have potential in electrocatalysis because of their mechanical robustness, metallic conductivity, and wide tunability in the electronic structure and element compositions. This study reports the first application of Co2 YZ-type Heusler compounds as electrocatalysts for the oxygen evolution reaction (OER). A range of Co2 YZ crystals was synthesized through the arc-melting method and the eg orbital filling of Co was precisely regulated by varying Y and Z sites of the compound. A correlation between the eg orbital filling of reactive Co sites and OER activity was found for Co2 MnZ compounds (Z=Ti, Al, V, and Ga), whereby higher catalytic current was achieved for eg orbital filling approaching unity. A similar trend of eg orbital filling on the reactivity of cobalt sites was also observed for other Heusler compounds (Co2 VZ, Z=Sn and Ga). This work demonstrates proof of concept in the application of Heusler compounds as a new class of OER electrocatalysts, and the influence of the manipulation of the spin orbitals on their catalytic performance.

Nitrogen-Doped Mixed-Phase Cobalt Nanocatalyst Derived from a Trinuclear Mixed-Valence Cobalt(III)/Cobalt(II) Complex for High-Performance Oxygen Evolution Reaction

Because of a continuous increase in energy demands and environmental concerns, a focus has been on the design and construction of a highly efficient, low-cost, environmentally friendly, and noble-metal free electrocatalyst for energy technology. Herein we report facile synthesis of the mixed-valence trinuclear cobalt complex 1 by the reaction of 2-amino-1-phenylethanol and CoCl₂·6H₂O in methanol as the solvent at room temperature. Further, 1 was reduced by using aqueous N₂H₄ as a simple reducing agent, followed by calcination at 300 °C for 3 h, yielding a nitrogen-doped mixed phase cobalt [β-Co(OH)₂ and CoO] nanocatalyst (N@MPCoNC). Both 1 and N@MPCoNC were characterized by various physicochemical techniques. Moreover, 1 was authenticated by single-crystal X-ray diffraction studies. The hybrid N@MPCoNC reveals a unique electronic and morphological structure, offering a low overpotential of 390 mV for a stable current density of 10 mA cm^-2 with high durability. This N@MPCoNC showed excellent electrocatalytic as well as photocatalytic activity for oxygen evolution reaction compared to 1.

Oxygen-Deficient Cobalt-Based Oxides for Electrocatalytic Water Splitting

An apparent increased interest has been recently devoted towards the previously untrodden path for anionic point defect engineering of electrocatalytic surfaces. The role of vacancy engineering in improving photo- and electrocatalytic activities of transition metal oxides (TMOs) has been widely reported. In particular, oxygen vacancy modulation on electrocatalysts of cobalt-based TMOs has seen a fresh spike of research work due to the substantial improvements they have shown towards oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Oxygen vacancy engineering is an effective scheme to quintessentially tune the electronic structure and charge transport, generate secondary active surface phases, and modify the surface adsorption/desorption behavior of reaction intermediates during water splitting. Based on contemporary efforts for inducing oxygen vacancies in a variety of cobalt oxide types, this work addresses facile and environmentally benign synthesis strategies, characterization techniques, and detailed insight into the intrinsic mechanistic modulation of electrocatalysts. It is our foresight that appropriate utilization of the principles discussed herein will aid researchers in rationally designing novel materials that can outperform noble metal-based electrocatalysts. Ultimately, future electrocatalysis implementation for selective seawater splitting is believed to depend on regulating the surface chemistry of active and stable TMOs.

Dual Role of Silver Moieties Coupled with Ordered Mesoporous Cobalt Oxide towards Electrocatalytic Oxygen Evolution Reaction

Herein, we show that the performance of mesostructured cobalt oxide electrocatalyst for oxygen evolution reaction (OER) can be significantly enhanced by coupling of silver species. Various analysis techniques including pair distribution function and Rietveld refinement, X-ray absorption spectroscopy at synchrotron as well as advanced electron microscopy revealed that silver exists as metallic Ag particles and well-dispersed Ag2 O nanoclusters within the mesostructure. The benefits of this synergy are twofold for OER: highly conductive metallic Ag improves the charge transfer ability of the electrocatalysts while ultra-small Ag2 O clusters provide the centers that can uptake Fe impurities from KOH electrolyte and boost the catalytic efficiency of Co-Ag oxides. The current density of mesostructured Co3 O4 at 1.7 VRHE is increased from 102 to 211 mA cm-2 with incorporation of silver spices. This work presents the dual role of silver moieties and demonstrates a simple method to increase the OER activity of Co3 O4 .

Stable boron and cobalt co-doped TiO2 nanotubes anode for efficient degradation of organic pollutants

Anode materials are crucial to anodic oxidation for wastewater treatment. In this regard, stable boron and cobalt co-doped TiO₂ nanotube (B, Co-TNT) was prepared for the first time, and its lifetime was found increased significantly while electrocatalytic activity decreased with the increase of Co(NO₃)₂ in preparation from 1 to 10 mM. Characterized by scanning electron microscope (SEM), X-Ray Diffraction (XRD) and X-ray Photo-electronic Spectroscopy (XPS), B and Co content were optimized and successfully doped on TNT, which was more smooth without ripple with Co content of 0.038 mg/cm² in a valence of +2, and B atomic content of 2.17 at.% in form of Ti-B-O. This optimized anode enhanced electrode lifetime 122.8 times while the electrochemical activity decreased slightly when compared to the undoped TNT. The effects of current density, initial pH and initial 2,4-dichlorophenoxyacetic acid (2,4-D) concentration were investigated, and the mainly responsible radical for degradation was confirmed to be the surface OH on B, Co-TNT anode. This anode had better performance on the TOC removal, mineralization current density (MCE) and energy consumption (Ec) when compared with BDD, PbO₂, DSA and Pt anodes, and it also presented a very stable degradation for 10 cycles oxidation of 20 mg/L 2,4-D with allowable Co leaching. Therefore, B, Co-TNT anode is a promising, stable, safety and cost-effective anode for application in electrochemical advanced oxidation processes (EAOPs).

A Porous Nano-Micro-Composite as a High-Performance Bi-Functional Air Electrode with Remarkable Stability for Rechargeable Zinc-Air Batteries

The development of bi-functional electrocatalyst with high catalytic activity and stable performance for both oxygen evolution/reduction reactions (OER/ORR) in aqueous alkaline solution is key to realize practical application of zinc-air batteries (ZABs). In this study, we reported a new porous nano-micro-composite as a bi-functional electrocatalyst for ZABs, devised by the in situ growth of metal-organic framework (MOF) nanocrystals onto the micrometer-sized Ba0.5Sr0.5Co0.8Fe0.2O3 (BSCF) perovskite oxide. Upon carbonization, MOF was converted to porous nitrogen-doped carbon nanocages and ultrafine cobalt oxides and CoN4 nanoparticles dispersing inside the carbon nanocages, which further anchored on the surface of BSCF oxide. We homogeneously dispersed BSCF perovskite particles in the surfactant; subsequently, ZIF-67 nanocrystals were grown onto the BSCF particles. In this way, leaching of metallic or organic species in MOFs and the aggregation of BSCF were effectively suppressed, thus maximizing the number of active sites for improving OER. The BSCF in turn acted as catalyst to promote the graphitization of carbon during pyrolysis, as well as to optimize the transition metal-to-carbon ratio, thus enhancing the ORR catalytic activity. A ZAB fabricated from such air electrode showed outstanding performance with a potential gap of only 0.83 V at 5 mA cm-2 for OER/ORR. Notably, no obvious performance degradation was observed for the continuous charge-discharge operation for 1800 cycles over an extended period of 300 h.

A Low-Temperature Molecular Precursor Approach to Copper-Based Nano-Sized Digenite Mineral for Efficient Electrocatalytic Oxygen Evolution Reaction

In the urge of designing noble metal-free and sustainable electrocatalysts for oxygen evolution reaction (OER), herein, a mineral Digenite Cu9 S5 has been prepared from a molecular copper(I) precursor, [{(PyHS)2 CuI (PyHS)}2 ](OTf)2 (1), and utilized as an anode material in electrocatalytic OER for the first time. A hot injection of 1 yielded a pure phase and highly crystalline Cu9 S5 , which was then electrophoretically deposited (EPD) on a highly conducting nickel foam (NF) substrate. When assessed as an electrode for OER, the Cu9 S5 /NF displayed an overpotential of merely 298±3 mV at a current density of 10 mA cm-2 in alkaline media. The overpotential recorded here supersedes the value obtained for the best reported Cu-based as well as the benchmark precious-metal-based RuO2 and IrO2 electrocatalysts. In addition, the choronoamperometric OER indicated the superior stability of Cu9 S5 /NF, rendering its suitability as the sustainable anode material for practical feasibility. The excellent catalytic activity of Cu9 S5 can be attributed to the formation of a crystalline CuO overlayer on the conductive Cu9 S5 that behaves as active species to facilitate OER. This study delivers a distinct molecular precursor approach to produce highly active copper-based catalysts that could be used as an efficient and durable OER electro(pre)catalysts relying on non-precious metals.

Laser Fragmentation-Induced Defect-Rich Cobalt Oxide Nanoparticles for Electrochemical Oxygen Evolution Reaction

Sub-5 nm cobalt oxide nanoparticles are produced in a flowing water system by pulsed laser fragmentation in liquid (PLFL). Particle fragmentation from 8 nm to 4 nm occurs and is attributed to the oxidation process in water where oxidative species are present and the local temperature is rapidly elevated under laser irradiation. Significantly higher surface area, crystal phase transformation, and formation of structural defects (Co2+ defects and oxygen vacancies) through the PLFL process are evidenced by detailed structural characterizations by nitrogen physisorption, electron microscopy, synchrotron X-ray diffraction, and X-ray photoelectron spectroscopy. When employed as electrocatalysts for the oxygen evolution reaction under alkaline conditions, the fragmented cobalt oxides exhibit superior catalytic activity over pristine and nanocast cobalt oxides, delivering a current density of 10 mA cm-2 at 369 mV and a Tafel slope of 46 mV dec-1 , which is attributed to a larger exposed active surface area, the formation of defects, and an increased charge transfer rate. The study provides an effective approach to engineering cobalt oxide nanostructures in a flowing water system, which shows great potential for sustainable production of active cobalt catalysts.

CoFe–OH Double Hydroxide Films Electrodeposited on Ni-Foam as Electrocatalyst for the Oxygen Evolution Reaction

Cobalt-iron double hydroxide (CoFe–OH) films were electrochemically deposited on 3D Ni foam electrodes for the oxygen evolution reaction (OER). The dependence of the OER activity on film composition and thickness was evaluated, which revealed an optimal Fe:Co ratio of about 1:2.33. The composition of the catalyst film was observed to vary with film thickness. The electrodeposition parameters were carefully controlled to yield microstructured Ni-foam decorated with CoFe–OH films of controlled thickness and composition. The most active electrode exhibited an overpotential as low as 360 mV OER at an industrial scale current density of 400 mA cm−2 that remained stable for at least 320 h. This work contributes towards the fabrication of practical electrodes with the focus on the development of stable electrodes for electrocatalytic oxygen evolution at high current densities.

The synergistic effect of Co/Ni in ultrathin metal–organic framework nanosheets for the prominent optimization of non-enzymatic electrochemical glucose detection

Co–Ni ultrathin metal organic framework nanosheets exhibited extremely high sensitivity, wide linear range, low detection limit and excellent selectivity as a glucose sensing electrode material.

Cobalt Amide Imidate Imidazolate Frameworks as Highly Active Oxygen Evolution Model Materials

Two imidazolate-based Co-MOFs, IFP-5 and IFP-8 (imidazolate framework Potsdam), with a different peripheral group -R (-Me and -OMe, respectively) have been synthesized by a solvothermal method and tested toward the oxygen evolution reaction (OER). Remarkably, IFP-8 presents much lower overpotentials (319 mV at 10 mA/cm2 and 490 mV at 500 mA/cm2) than IFP-5 toward OER, as confirmed by online gas chromatography measurements (Faradaic yield of O2 > 99%). Moreover, the system is extraordinarily stable during 120 h, even when used as a catalyst toward the overall water splitting reaction without any sign of fatigue. An integrated ex situ spectroscopic study, based on powder X-ray diffraction, extended X-ray absorption fine structure, and attenuated total reflection, allows the identification of the active species and the factors that determine the catalytic activity. Indeed, it was found that the performances are highly affected by the nature of the -R group, because this small change strongly influences the conversion of the initial metal organic framework to the active species. As a consequence, the remarkable activity of IFP-8 can be ascribed to the formation of Co(O)OH phase with a particle size of a few nanometers (3-10 nm) during the electrocatalytic oxygen evolution.