A Conjugated Polymeric Supramolecular Network with Aggregation‐Induced Emission Enhancement: An Efficient Light‐Harvesting System with an Ultrahigh Antenna Effect

Construction of an Artificial Sequential Light-Harvesting System and White-Light Material Utilizing Supramolecular Gels

The molecular (pyren-1-yloxy)-acetic acid (Py) with excellent fluorescence properties was synthesized from 1-hydroxypyrene (Hp) and formed a supramolecular gel with an acid-base stimulus response in dimethylformamide and water. On the basis of gel, the fluorescent dye perylene 3, 9-dicarbxylic acid, and rhodamine 6g were added successively to construct a step-by-step artificial light-harvesting system, so that the fluorescence color changed from blue-purple to green to red, and white light emission was realized by adjusting the ratio of donors and acceptors.

Sculpting photoproducts with DNA origami

Natural light-harvesting systems spatially organize densely packed dyes in different configurations to either transport excitons or convert them into charge photoproducts, with high efficiency. In contrast, artificial photosystems like organic solar cells and light-emitting diodes lack this fine structural control, limiting their efficiency. Thus, biomimetic multi-dye systems are needed to organize dyes with the sub-nanometer spatial control required to sculpt resulting photoproducts. Here, we synthesize 11 distinct perylene diimide (PDI) dimers integrated into DNA origami nanostructures and identify dimer architectures that offer discrete control over exciton transport versus charge separation. The large structural-space and site-tunability of origami uniquely provides controlled PDI dimer packing to form distinct excimer photoproducts, which are sensitive to interdye configurations. In the future, this platform enables large-scale programmed assembly of dyes mimicking natural systems to sculpt distinct photophysical products needed for a broad range of optoelectronic devices, including solar energy converters and quantum information processors.

New multiple-layered 3D polymers showing aggregation-induced emission and polarization

An exceptional achiral and chiral multilayer 3D polymer has been created and controlled by uniform and distinct aromatic chromophore units that are multiply sandwiched by naphthyl berths. In order to put together this assembly, it was necessary to search for new catalytic Suzuki-Miyaura polycouplings among various catalytic systems, monomers, and catalysts. Gel Permeation Chromatography (GPC) was able to verify the presence of many framework layers. The resulting achiral and chiral polymers displayed notable optical characteristic.

Construction of an Artificial Light-Harvesting System with Photocatalytic Activity Based on Nor-seco-cucurbit[10]uril in Aqueous Solution

A supramolecular assembly was constructed based on the tetraphenylethylene derivatives (TPEs) and nor-seco-cucurbit[10]uril (ns-Q[10]). Upon introduction of the dye Rhodamine B (RB) into the TPEs@ns-Q[10] assembly, an energy transfer process can occur from the TPEs@ns-Q[10] assembly to RB. Moreover, after the addition of Nile Red (NiR), a two-step sequential energy transfer process from the TPEs@ns-Q[10] assembly to RB and then to NiR can occur. Additionally, the dye Eosin Y (ESY) was introduced into the TPEs@ns-Q[10] assembly and an energy transfer process can take place from the TPEs@ns-Q[10] assembly to ESY. To utilize the harvested energy from the TPEs@ns-Q[10]-RB-NiR and TPEs@ns-Q[10]-ESY system, we applied the TPEs@ns-Q[10] assembly-based light-harvesting systems (LHSs) as a catalyst for the advancement of the photocatalytic dehalogenation reaction in aqueous solution. When promoted with 0.5 mol % catalyst, the reaction yield reached 78 and 68%, demonstrating the promising potential of TPEs@ns-Q[10] assembly-based LHSs in the promotion of the photocatalytic dehalogenation reaction.

Recent Developments of Fluorescence Sensors Constructed from Pillar[n]arene-Based Supramolecular Architectures Containing Metal Coordination Sites

The field of fluorescence sensing, leveraging various supramolecular self-assembled architectures constructed from macrocyclic pillar[n]arenes, has seen significant advancement in recent decades. This review comprehensively discusses, for the first time, the recent innovations in the synthesis and self-assembly of pillar[n]arene-based supramolecular architectures (PSAs) containing metal coordination sites, along with their practical applications and prospects in fluorescence sensing. Integrating hydrophobic and electron-rich cavities of pillar[n]arenes into these supramolecular structures endows the entire system with self-assembly behavior and stimulus responsiveness. Employing the host-guest interaction strategy and complementary coordination forces, PSAs exhibiting both intelligent and controllable properties are successfully constructed. This provides a broad horizon for advancing fluorescence sensors capable of detecting environmental pollutants. This review aims to establish a solid foundation for the future development of fluorescence sensing applications utilizing PSAs. Additionally, current challenges and future perspectives in this field are discussed.

Regioselective Dearomative Amidoximation of Nonactivated Arenes Enabled by Photohomolytic Cleavage of N-nitrosamides

Dearomative spirocyclization reactions represent a promising means to convert arenes into three-dimensional architectures; however, controlling the regioselectivity of radical dearomatization with nonactivated arenes to afford the spirocyclizative 1,2-difunctionalization other than its kinetically preferred 1,4-difunctionalization is exceptionally challenging. Here we disclose a novel strategy for dearomative 1,2- or 1,4-amidoximation of (hetero)arenes enabled by direct visible-light-induced homolysis of N-NO bonds of nitrosamides, giving rise to various highly regioselective amidoximated spirocycles that previously have been inaccessible or required elaborate synthetic efforts. The mechanism and origins of the observed regioselectivities were investigated by control experiments and density functional theory calculations.

Nanoarchitectonics of highly dispersed polythiophene on paper for accurate quantitative detection of metal ions

π-Conjugated polymers such as polythiophene provide intramolecular wire effects upon analyte capture, which contribute to sensitive detection in chemical sensing. However, inherent aggregation-induced quenching causes difficulty in fluorescent chemical sensing in the solid state. Herein, we propose a solid-state fluorescent chemosensor array device made of a paper substrate (PCSAD) for the qualitative and quantitative detection of metal ions. A polythiophene derivative modified by dipicolylamine moieties (1poly), which shows optical changes upon the addition of target metal ions (i.e., Cu2+, Cd2+, Ni2+, Co2+, Pb2+, Zn2+, and Hg2+), was highly dispersed on the paper substrate using office apparatus. In this regard, morphological observation of the PCSAD after printing of 1poly suggested the contribution of the fiber structures of the paper substrate to the homogeneous dispersion of 1poly ink to suppress aggregation-induced quenching. The optical changes in the PCSAD upon the addition of metal ions was rapidly recorded using a smartphone, which was further applied to imaging analysis and pattern recognition techniques for high-throughput sensing. Indeed, the printed PCSAD embedded with 1poly achieved the accurate detection of metal ions at ppm levels contained in river water. The limit of detection of the PCSAD-based sensing system using a smartphone (48 ppb for Cu2+ ions) is comparable to that of a solution-based sensing system using a stationary spectrophotometer (16 ppb for Cu2+ ions). Therefore, the methodology based on a combination of a paper-based sensor array and a π-conjugated polymer will be a promising approach for solid-state fluorescent chemosensors.

Carbazole-based artificial light-harvesting system for photocatalytic cross-coupling dehydrogenation reaction

A carbazole-based artificial light-harvesting system (LHS) was successfully fabricated based on the supramolecular assembly of AIE-enhanced donor (CTD), water-soluble phosphate-pillar[5]arene (WPP5), and eosin Y (ESY) acceptor. The formed WPP5-CTD possessed remarkable AIE emission, featuring an ideal energy donor for light harvesting. After encapsulation of ESY, the energy of WPP5-CTD was efficiently transferred to ESY in WPP5-CTD-ESY, and the antenna effect was 38.5, which was much higher than that of recently reported LHSs. Notably, WPP5-CTD-ESY was successfully utilized as a photocatalyst to realize the cross-coupling dehydrogenation reaction of diphenylphosphine oxide and benzothiazole derivatives, suggesting great potential for aqueous photocatalytic applications of this LHS.

Bioinspired polymeric supramolecular columns as efficient yet controllable artificial light-harvesting platform

Light-harvesting is an indispensable process in photosynthesis, and researchers have been exploring various structural scaffolds to create artificial light-harvesting systems. However, achieving high donor/acceptor ratios for efficient energy transfer remains a challenge as excitons need to travel longer diffusion lengths within the donor matrix to reach the acceptor. Here, we report a polymeric supramolecular column-based light-harvesting platform inspired by the natural light-harvesting of purple photosynthetic bacteria to address this issue. The supramolecular column is designed as a discotic columnar liquid crystalline polymer and acts as the donor, with the acceptor intercalated within it. The modular columnar design enables an ultrahigh donor/acceptor ratio of 20000:1 and an antenna effect exceeding 100. Moreover, the spatial confinement within the supramolecular columns facilitates control over the energy transfer process, enabling dynamic full-color tunable emission for information encryption applications with spatiotemporal regulation security.

Polydopamine modified by pillar[5]arene in situ for targeted chemo-photothermal cancer therapy

A pillar[5]arene-modified polydopamine (PDA-P[5]OH) displaying pH/NIR dual-responsive properties was constructed successfully in situ for targeted chemo-photothermal cancer therapy.

An anti-freeze fluorescent organogel with rapid shape-forming properties for constructing artificial light harvesting systems used in extremely cold environments

Using polyvinyl alcohol (PVA) and perylene-3,9-dicarboxylic acid (PDA) as raw materials, a new anti-freeze (-50 °C) fluorescent organogel with rapid shape-forming (2 h) properties was synthesised based on a certain proportion of the binary solvent of N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO). Then, an artificial light-harvesting system (ALHS) used in extremely cold environments was successfully constructed by mixing fluorescent dyes sulphorhodamine101 (SR101) and rhodamine 6G (R6G) into them as acceptors.

Three-step cascaded artificial light-harvesting systems with tunable efficiency based on metallacycles

It is still challenging to develop multi-step cascaded artificial light-harvesting systems (ALHSs) with tunable efficiency. Here, we designed novel cascaded ALHSs with AIE-active metallacycles as the light-harvesting antenna, Eosin Y (ESY) and sulforhodamine 101 (SR101) as conveyors, near-infrared emissive chlorin-e6 (Ce6) as the final acceptor. The close contact and fair spectral overlap between donor and acceptor molecules at each level ensured the efficient sequential three-step energy transfer. The excited energy was sequentially and efficiently funneled to Ce6 along the cascaded line MTPEPt1 → ESY → SR101 → Ce6. Additionally, a unique strategy for regulating the efficiency of ALHS was illustrated by adjusting hydrophilic and hydrophobic interactions.

A cavitand-based supramolecular artificial light-harvesting system with sequential energy transfer for photocatalysis

A novel artificial light-harvesting system, featuring sequential energy transfer processes, has been successfully constructed, which demonstrated white light emission through a precise adjustment of the donor-acceptor ratio. To better mimic natural photosynthesis, the system is employed as a nanoreactor for the photocatalysis of a cross-dehydrogenative coupling (CDC) reaction in aqueous solution.

Construction of an efficient artificial light-harvesting system based on hyperbranched polyethyleneimine and improvement of photocatalytic performance

An artificial light-harvesting system (ALHS) was developed in aqueous solution by employing the electrostatic co-assembly of a tetraphenylethylene derivative modified with two sulfonate groups (TPE-BSBO) and hyperbranched polyethyleneimine (PEI) as the energy donors, and 4,7-bis(2-thienyl)-2,1,3-benzothiadiazole (DBT) as the energy acceptors. The ALHS exhibits not only high efficiency in energy transfer and conversion but also a significant enhancement in the generation of reactive oxygen species (ROS), especially superoxide anion radicals (O2˙-), facilitating its utilization in photocatalytic oxidation reactions.

A supramolecular artificial light-harvesting system based on a luminescent platinum(II) metallacage

A trigonal luminescent metallacage was constructed by the coordination-driven self-assembly of m-pyridine-modified tetraphenylene ligands with organic Pt(II) acceptors, which exhibited excellent Aggregation-Induced Emission (AIE) properties. An efficient artificial light-harvesting system was successfully constructed by selecting the metallacage as the donor and the hydrophobic fluorescent dye Nile Red (NiR) as the donor molecule in a system of acetone/water (1/9, v/v), The absorption spectra of NiR and the emission spectra of the metallacage showed considerable overlap, achieving energy transfer from the metallacage to NiR.

A Two-Step Fluorescence-Resonance Energy Transfer System Constructed by Platinum(II) Metallacycle Based Molecular Recognition

Considerable progress in the construction of efficient fluorescence-resonance energy transfer (FRET) systems has promoted the development of artificial energy transfer materials. However, despite recent advances, the exploration of efficient and easy strategies to fabricate novel supramolecular systems with FRET activities is still a challenge. Here, we report that a two-step FRET system was successfully achieved, driven by platinum metallacycle based host-guest interactions. The two-step FRET system is used for the preparation of a white-light-emitting diode and serves as a nanoreactor for the photosynthetic process. This work offers a strategy for the fabrication of FRET systems and opens opportunities for functional materials constructed by platinum(II) metallacycle based host-guest interactions.

Smart organic materials based on macrocycle hosts

Innovative design of smart organic materials is of great importance for the advancement of modern technology. Macrocycle hosts, possessing cyclic skeletons, intrinsic cavities, and specific guest binding properties, have demonstrated pronounced potential for the elaborate fabrication of a variety of functional organic materials with smart stimuli-responsive characteristics. In this tutorial review, we outline the current development of smart organic materials based on macrocycle hosts as key building blocks, focusing on the design principles and functional mechanisms of the tailored systems. Three main types of macrocycle-based smart organic materials are exemplified as follows according to the distinct forms of construction patterns: (1) supramolecular polymeric materials and nanoassemblies; (2) adaptive molecular crystals; (3) smart porous organic materials. The responsive performances of macrocycle-containing smart materials in versatile aspects, including mechanically adaptive polymers, soft optoelectronic devices, data encryption, drug delivery systems, artificial transmembrane channels, crystalline-state gas adsorption/separation, and fluorescence sensing, are illustrated by discussing the representative studies as paradigms, where the roles of macrocycles in these systems are highlighted. We also provide in the conclusion part the perspectives and remaining challenges in this burgeoning field.

Host-Guest Complexes of Pillar[5]arene as Components for Supramolecular Light-Harvesting Systems with Tunable Fluorescence

A guest molecule containing a short alkyl spacer between the tetraphenylethylene group and the methylpyridinium group was designed and synthesized. After complexation with a water-soluble pillar[5]arene, the resulting host-guest complex can further self-assemble into fluorescence-emitting nanoparticles in water. By loading a commercially available dye Rhodamine 6G into the nanoparticles, an efficient artificial light-harvesting system with high donor/acceptor ratios (>400/1) was successfully constructed. The obtained systems show considerable antenna effects with values of more than 10 times. The system also exhibits tunable fluorescence emission behavior and can be used as a fluorescent ink for information encryption.

Effect on the conformation of monosubstituted pillar[5]arene: solvent, temperature, concentration and linker length

A series of monosubstituted pillar[5]arenes (PIn) bearing a fluorescent probe (E)-4-[4-(dimethylamino)styryl-]-1-pyridinium were synthesized and characterized. The conformations of the monosubstituted pillar[5]arenes were investigated systematically by NMR and fluorescence spectroscopy and were found to be dependent on solvent polarity, concentration, temperature and linker length. PI1 with a short linker remained uncomplexed in DMSO, whereas it formed a polymer at high concentration in chloroform. As the linker length increased, PI2-4 could exist in equilibrium between self-inclusion monomer and intermolecular complexes. The increase of concentration led to the formation of a polymer in DMSO and a self-penetrating dimer in chloroform. The results provided information on the modulation of supramolecular assemblies by various factors.

An artificial light-harvesting system constructed from a water-soluble metal-organic barrel for photocatalytic aerobic reactions in aqueous media

An artificial light-harvesting system constructed from a water-soluble host-guest complex can be regarded as a high-level conceptual model of its biological counterpart and can convert solar energy into chemical energy in an aqueous environment. Herein, a water-soluble metal-organic barrel Ga-tpe with twelve sulfonic acid units was obtained by subcomponent self-assembly between Ga3+ ions and tetra-topic ligands with tetraphenylethylene (TPE) cores. By taking advantage of host-guest interactions, cationic dye rhodamine B (RB) was constrained in the pocket of Ga-tpe to promote the Förster resonance energy transfer (FRET) process for efficient photocatalytic aerobic oxidation of sulfides and cross-dehydrogenative coupling (CDC) reaction in aqueous media.

Near-Infrared Emissive Cascaded Artificial Light-Harvesting System with Enhanced Antibacterial Efficiency

Combination of platinum(II) metallacycles and photodynamic inactivation presents a promising antibacterial strategy. Herein, a cascaded artificial light-capturing system is developed in which an aggregation-induced emission-active platinum(II) metallacycle (PtTPEM) is utilized as the antenna, sulforhodamine 101 (SR101) as a key conveyor, and the near-infrared emissive photosensitizer Chlorin-e6 (Ce6) as the final energy acceptor. The well-dispersed Ce6 in the proximity of energy donors not only avoids self-quenching in the physiological environment but also contributes to energy transfer from donor to acceptor, thereby significantly improving the 1 O2 generation ability of the light-harvesting system under white light irradiation. By integrating the platinum(II) metallacycle and 1 O2 , a more efficient synergistic antibacterial effect is achieved at low concentrations, along with a significant decrease in dark toxicity caused by PtTPEM.

Water-soluble phosphate-pillar[5]arene (WPP5)-based artificial light-harvesting system for photocatalytic cross-coupling dehydrogenation

A novel water-soluble phosphate-pillar[5]arene (WPP5)-based artificial light-harvesting system (LHS) was successfully fabricated through the supramolecular assembly of phenyl-pyridyl-acrylonitrile derivative (PBT), WPP5, and organic pigment Eosin Y (ESY). Initially, after host-guest interaction, WPP5 could bind well with PBT and form WPP5 ⊃ PBT complexes in water, which further assembled into WPP5 ⊃ PBT nanoparticles. WPP5 ⊃ PBT nanoparticles performed an outstanding aggregation-induced emission (AIE) capability because of the J-aggregates of PBT in WPP5 ⊃ PBT nanoparticles, which were appropriate as fluorescence resonance energy transfer (FRET) donors for artificial light-harvesting. Moreover, due to the emission region of WPP5 ⊃ PBT overlapped well with the UV-Vis absorption of ESY, the energy of WPP5 ⊃ PBT (donor) could be significantly transferred to ESY (acceptor) via FRET process in WPP5 ⊃ PBT-ESY nanoparticles. Notably, the antenna effect (AE_{WPP5⊃PBT-ESY}) of WPP5 ⊃ PBT-ESY LHS was determined to be 30.3, which was much higher than that of recent artificial LHSs for photocatalytic cross-coupling dehydrogenation (CCD) reactions, suggesting a potential application in photocatalytic reaction. Furthermore, through the energy transfer from PBT to ESY, the absolute fluorescence quantum yields performed a remarkable increase from 14.4% (for WPP5 ⊃ PBT) to 35.7% (for WPP5 ⊃ PBT-ESY), further confirming their FRET processes in WPP5 ⊃ PBT-ESY LHS. Subsequently, in order to output the harvested energy for catalytic reactions, WPP5 ⊃ PBT-ESY LHSs were used as photosensitizers to catalyze the CCD reaction of benzothiazole and diphenylphosphine oxide. Compared to free ESY group (21%), a significant cross-coupling yield of 75% in WPP5 ⊃ PBT-ESY LHS was observed, because more UV region energy of PBT was transferred to ESY for CCD reaction, which suggested more potential in improving the catalytic activity of organic pigment photosensitizers in aqueous systems.

A pillar[5]arene noncovalent assembly boosts a full-color lanthanide supramolecular light switch

A photo-responsive full-color lanthanide supramolecular switch was constructed from a synthetic 2,6-pyridine dicarboxylic acid (DPA)-modified pillar[5]arene (H) complexing with lanthanide ion (Ln3+ = Tb3+ and Eu3+) and dicationic diarylethene derivative (G1) through a noncovalent supramolecular assembly. Benefiting from the strong complexation between DPA and Ln3+ with a 3 : 1 stoichiometric ratio, the supramolecular complex H/Ln3+ presented an emerging lanthanide emission in the aqueous and organic phase. Subsequently, a network supramolecular polymer was formed by H/Ln3+ further encapsulating dicationic G1via the hydrophobic cavity of pillar[5]arene, which greatly contributed to the increased emission intensity and lifetime, and also resulted in the formation of a lanthanide supramolecular light switch. Moreover, full-color luminescence, especially white light emission, was achieved in aqueous (CIE: 0.31, 0.32) and dichloromethane (CIE: 0.31, 0.33) solutions by the adjustment of different ratios of Tb3+ and Eu3+. Notably, the photo-reversible luminescence properties of the assembly were tuned via alternant UV/vis light irradiation due to the conformation-dependent photochromic energy transfer between the lanthanide and the open/closed-ring of diarylethene. Ultimately, the prepared lanthanide supramolecular switch was successfully applied to anti-counterfeiting through the use of intelligent multicolored writing inks, and presents new opportunities for the design of advanced stimuli-responsive on-demand color tuning with lanthanide luminescent materials.

Contrasting luminescence in heparin and DNA-templated co-assemblies of dimeric cyanostilbenes: efficient energy transfer in heparin-based co-assemblies

Dimeric cationic cyanostilbenes with peripheral alkyl chains demonstrated aggregation in aqueous media depending on the length of the hydrophobic segment and produced luminescent spherical nano-assemblies in the case of long alkyl chain derivatives. In the presence of heparin, a bio-polyanion that is routinely used as an anticoagulant, the self-assembled structures obtained from the amphiphilic dimers showed the formation of higher-order structures whereas the non-assembling dimers exhibited heparin-induced supramolecular structure formation. In both cases, a significant enhancement in the emission was observed. This led to the detection of heparin in aqueous buffer, serum and plasma with a "turn-on" fluorescence response. Interestingly, these derivatives also exhibited luminescence variation in the presence of ctDNA. However, the response towards DNA was opposite to that observed in the case of heparin i.e., "turn-off'' fluorescence response. Notably, depending on the length of the alkyl segment, divergent DNA binding modes of these derivatives were observed. Due to their enhanced luminescence, the heparin-based co-assemblies were further explored as artificial light-harvesting systems exhibiting an efficient energy transfer process to embedded acceptor dyes with a high antenna effect.

Self-assembled supramolecular artificial light-harvesting nanosystems: construction, modulation, and applications

Artificial light-harvesting systems, an elegant way to capture, transfer and utilize solar energy, have attracted great attention in recent years. As the primary step of natural photosynthesis, the principle of light-harvesting systems has been intensively investigated, which is further employed for artificial construction of such systems. Supramolecular self-assembly is one of the feasible methods for building artificial light-harvesting systems, which also offers an advantageous pathway for improving light-harvesting efficiency. Many artificial light-harvesting systems based on supramolecular self-assembly have been successfully constructed at the nanoscale with extremely high donor/acceptor ratios, energy transfer efficiency and the antenna effect, which manifests that self-assembled supramolecular nanosystems are indeed a viable way for constructing efficient light-harvesting systems. Non-covalent interactions of supramolecular self-assembly provide diverse approaches to improve the efficiency of artificial light-harvesting systems. In this review, we summarize the recent advances in artificial light-harvesting systems based on self-assembled supramolecular nanosystems. The construction, modulation, and applications of self-assembled supramolecular light-harvesting systems are presented, and the corresponding mechanisms, research prospects and challenges are also briefly highlighted and discussed.

Dimeric Pillar[5]arene as a Novel Fluorescent Host for Controllable Fabrication of Supramolecular Assemblies and Their Photocatalytic Applications

A dimeric fluorescent macrocycle m-TPE Di-EtP5 (meso-tetraphenylethylene dimeric ethoxypillar[5]arene) is synthesized based on the meso-functionalized ethoxy pillar[5]arene. Through the connectivity of two pillar[5]arenes by CC double bond, the central tetraphenylethylene (TPE) moiety is simultaneously formed. The resultant bicyclic molecule not only retains the host-guest properties of pillararenes but also introduces the interesting aggregation-induced emission properties inherent in the embedded TPE structure. Three dinitrile derivatives with various linkers are designed as guests (G1, G2, and G3) to form host-guest assemblies with m-TPE Di-EtP5. The morphological control and fluorescence properties of the assemblies are successfully realized. G1 with a shorter alkyl chain as the linker completely threads into the cavities of the host. G2, due to its longer chain length, forms a linear supramolecular polymer upon binding to m-TPE Di-EtP5. G3 differs from G2 by possessing a bulky phenyl group in the middle of the chain, which can be further assembled with m-TPE Di-EtP5 to form supramolecular layered polymer and precipitated out in solution, and can be efficiently applied to photocatalytic reactions.

Highly efficient Förster resonance energy transfer between an emissive tetraphenylethylene-based metal-organic cage and the encapsulated dye guest

The host-guest strategy presents an ideal way to achieve efficient Förster resonance energy transfer (FRET) by forcing close proximity between an energy donor and acceptor. Herein, by encapsulating the negatively charged acceptor dyes eosin Y (EY) or sulforhodamine 101 (SR101) in the cationic tetraphenylethene-based emissive cage-like host donor Zn-1, host-guest complexes were formed that exhibit highly efficient FRET. The energy transfer efficiency of Zn-1⊃EY reached 82.4%. To better verify the occurrence of the FRET process and make full use of the harvested energy, Zn-1⊃EY was successfully used as a photochemical catalyst for the dehalogenation of α-bromoacetophenone. Furthermore, the emission color of the host-guest system Zn-1⊃SR101 could be adjusted to exhibit bright white-light emission with the CIE coordinates (0.32, 0.33). This work details a promising approach to enhance the efficiency of the FRET process by the creation of a host-guest system between the cage-like host and dye acceptor, thus serving as a versatile platform for mimicking natural light-harvesting systems.

Covalently bridged pillararene-based polymers: structures, synthesis, and applications

Covalently bridged pillararene-based polymers (CBPPs) are a special class of macrocycle-based polymers in which multiple pillararene monomers are attached to the polymer structures by covalent bonds. Owing to the unique molecular structures including the connection components or the spatial structures, CBPPs have become increasingly popular in applications ranging from environmental science to biomedical science. In this review, CBPPs are divided into three types (linear polymers, grafted polymers, and cross-linked polymers) according to their structural characteristics and described from the perspective of synthesis methods comprehensively. In addition, the applications of CBPPs are presented, including selective adsorption and separation, fluorescence sensing and detection, construction of supramolecular gels, anticancer drug delivery, artificial light-harvesting, catalysis, and others. Finally, the current challenging issues and comprehensive prospects of CBPPs are discussed.

Artificial supramolecular light-harvesting systems based on a pyrene derivative for photochemical catalysis

A supramolecular polymer based on NPyP and CB[8] was constructed via host–guest interactions with the AIE effect for artificial light-harvesting energy transfer and photocatalysis.

Solid Lipid Nanoparticles Based on Monosubstituted Pillar[5]arenes: Chemoselective Synthesis of Macrocycles and Their Supramolecular Self-Assembly

Novel monosubstituted pillar[5]arenes with one or two terminal carboxyl groups were synthesized by the reaction of succinic anhydride with pillar[5]arene derivative containing a diethylenetriamine function. The ability for non-covalent self-assembly in chloroform, dimethyl sulfoxide, as well as in tetrahydrofuran-water system was studied. The ability of the synthesized macrocycles to form different types of associates depending on the substituent nature was established. The formation of stable particles with average diameter of 192 nm in chloroform and of 439 nm in DMSO was shown for pillar[5]arene containing two carboxyl fragments. Solid lipid nanoparticles (SLN) based on monosubstituted pillar[5]arenes were synthesized by nanoprecipitation in THF-water system. Minor changes in the structure of the macrocycle substituent can dramatically influence the stability and shape of SLN (spherical and rod-like structures) accordingly to DLS and TEM. The presence of two carboxyl groups in the macrocycle substituent leads to the formation of stable spherical SLN with an average hydrodynamic diameter of 364-454 nm. Rod-like structures are formed by pillar[5]arene containing one carboxyl fragment, which diameter is about of 50-80 nm and length of 700-1000 nm. The synthesized stable SLN open up great prospects for their use as drug storage systems.

Supramolecular polymers based on host-guest interactions for the construction of artificial light-harvesting systems

In the present work, artificial light-harvesting systems with a fluorescence resonance energy transfer (FRET) process were successfully obtained in the aqueous solution. We designed and synthesized an amphiphilic pyrene derivative with two 4-vinylpyridium arms (Pmvb), which can interact with cucurbit[8]uril (CB[8]) to form supramolecular polymer through host-guest interactions in aqueous solution. The formation of supramolecular polymers results in a significant enhancement of fluorescence, which makes Pmvb-CB[8] an ideal energy donor to construct artificial light-harvesting systems in the aqueous solution. Subsequently, two different fluorescence dyes Rhodamine B (RhB) and Sulforhodamine 101 (SR101) were introduced as energy acceptors into the solution of Pmvb-CB[8] respectively, to fabricate two different artificial light-harvesting systems. The obtained artificial light-harvesting systems can achieve an efficient energy transfer process from Pmvb-CB[8] to RhB or SR101 with high energy transfer efficiency.

Artificial Light-Harvesting System with White-Light Emission in a Bicontinuous Ionic Medium

Artificial light-harvesting systems (ALHSs), which are closely related to Förster resonance energy transfer (FRET), are among the most attractive scientific topics during the past few decades. Specifically, binary ALHSs that are composed of a fluid donor and acceptor have a simplified composition and high number density of the donor units. However, largely due to the difficulty in obtaining a fluid donor, investigation of these systems is still quite limited, especially for the ionic systems. Herein, we report a new type of binary ALHS using an ionic naphthalimide (NPI) derivative as a donor, which shows greatly improved photoluminescence for its bicontinuous liquid structure. When blending with an acceptor such as rhodamine 6G or trans-4-[4-(dimethylamino)styryl]-methylpyridinium iodide, efficient FRET was confirmed by both experimental results and molecular dynamics simulations, with an energy transfer efficiency up to ∼90%. Tunable color, including white-light emission, was achieved by tuning the acceptor/donor ratio, opening the door for a variety of applications such as light-emitting diodes and photoluminescent inks.

Amphiphilicity-Controlled Polychromatic Emissive Supramolecular Self-Assemblies for Highly Sensitive and Efficient Artificial Light-Harvesting Systems

Dynamic sequential control of photoluminescence by supramolecular approaches has become a great issue in supramolecular chemistry. However, developing a systematic strategy to construct polychromatic photoluminescent supramolecular self-assemblies for improving the efficiency and sensitivity of artificial light-harvesting systems still remains a challenge. Here, a series of amphiphilicity-controlled supramolecular self-assemblies with polychromatic fluorescence based on lower-rim hexyl-modified sulfonatocalix[4]arene (SC4A6) and N-alkyl-modified p-phenylene divinylpyridiniums (PVPn, n = 2-7) as efficient light-harvesting platforms is reported. PVPn shows wide ranges of polychromatic fluorescence by co-assembling with SC4A6, whose emission trends significantly depend on the modified alkyl-chains of PVPn. The formed PVPn-SC4A6 co-assemblies as light-harvesting platforms are extremely sensitive for transferring the energy to two near-infrared emissive acceptors, Nile blue (NiB) and Rhodamine 800. After optimizing the amphiphilicity of PVPn-SC4A6 systems, the PVPn-SC4A6-NiB light-harvesting systems achieve an ultrasensitive working concentration for NiB (2 nm) and an ultrahigh antenna effect up to 91.0. Furthermore, the two different kinds of light-harvesting nanoparticles exhibit good performance on near-infrared imaging in the Golgi apparatus and mitochondria, respectively.

Noncovalent Polymerization-Activated Ultrastrong Near-Infrared Room-Temperature Phosphorescence Energy Transfer Assembly in Aqueous Solution

Noncovalent macrocycle-confined supramolecular purely organic room-temperature phosphorescence (RTP) is a current research hotspot. Herein, a high-efficiency noncovalent polymerization-activated near-infrared (NIR)-emissive RTP-harvesting system in aqueous solution based on the stepwise confinement of cucurbit[7]uril (CB[7]) and β-cyclodextrin-grafted hyaluronic acid (HACD), is reported. Compared with the dodecyl-chain-bridged 6-bromoisoquinoline derivative (G), the dumbbell-shaped assembly G⊂CB[7] presents an appeared complexation-induced RTP signal at 540 nm via the first confinement of CB[7]. Subsequently, benefitting from the stepwise confinement encapsulation of the β-cyclodextrin cavity, the subsequent noncovalent polymerization of the binary G⊂CB[7] assembly enabled by HACD can contribute to the further-enhanced RTP emission intensity approximately eight times in addition to an increased lifetime from 59.0 µs to 0.581 ms. Moreover, upon doping a small amount of two types of organic dyes, Nile blue or tetrakis(4-sulfophenyl)porphyrin as an acceptor into the supramolecular confinement assembly G⊂CB[7] @ HACD, efficient RTP energy transfer occurs accompanied by a long-lived NIR-emitting performance (680 and 710 nm) with a high donor/acceptor ratio. Intriguingly, the prepared RTP-harvesting system is successfully applied for targeted NIR imaging of living tumor cells by utilizing the targeting ability of hyaluronic acid, which provides a new strategy to create advanced water-soluble NIR phosphorescent materials.

Hexaphenylbenzene-Based Deep Blue-Emissive Metallacages as Donors for Light-Harvesting Systems

We herein report the preparation of a series of hexaphenylbenzene (HPB)-based deep blue-emissive metallacages via multicomponent coordination-driven self-assembly. These metallacages feature prismatic structures with HPB derivatives as the faces and tetracarboxylic ligands as the pillars, as evidenced by NMR, mass spectrometry and X-ray diffraction analysis. Light-harvesting systems were further constructed by employing the metallacages as the donor and a naphthalimide derivative (NAP) as the acceptor, owing to their good spectral overlap. The judiciously chosen metallacage serves as the antenna, providing the suitable energy to excite the non-emissive NAP, and thus resulting in bright emission for NAP in the solid state. This study provides a type of HPB-based multicomponent emissive metallacage and explores their applications as energy donors to light up non-emissive fluorophores in the solid state, which will advance the development of emissive metallacages as useful luminescent materials.

Enhancing Mechanical Performance of a Polymer Material by Incorporating Pillar[5]arene-Based Host–Guest Interactions

Polymer gels have been widely used in the field for tissue engineering, sensing, and drug delivery due to their excellent biocompatibility, hydrophilicity, and degradability. However, common polymer gels are easily deformed on account of their relatively weak mechanical properties, thereby hindering their application fields, as well as shortening their service life. The incorporation of reversible non-covalent bonds is capable of improving the mechanical properties of polymer gels. Thus, here, a poly(methyl methacrylate) polymer network was prepared by introducing host–guest interactions between pillar[5]arene and pyridine cation. Owing to the incorporated host–guest interactions, the modified polymer gels exhibited extraordinary mechanical properties according to the results of the tensile tests. In addition, the influence of the host–guest interaction on the mechanical properties of the gels was also proved by rheological experiments and swelling experiments.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

Multicharged cyclodextrin supramolecular assemblies

Multicharged cyclodextrin (CD) supramolecular assemblies, including those based on positively/negatively charged modified mono-6-deoxy-CDs, per-6-deoxy-CDs, and random 2,3,6-deoxy-CDs, as well as parent CDs binding positively/negatively charged guests, have been extensively applied in chemistry, materials science, medicine, biological science, catalysis, and other fields. In this review, we primarily focus on summarizing the recent advances in positively/negatively charged CDs and parent CDs encapsulating positively/negatively charged guests, especially the construction process of supramolecular assemblies and their applications. Compared with uncharged CDs, multicharged CDs display remarkably high antiviral and antibacterial activity as well as efficient protein fibrosis inhibition. Meanwhile, charged CDs can interact with oppositely charged dyes, drugs, polymers, and biomacromolecules to achieve effective encapsulation and aggregation. Consequently, multicharged CD supramolecular assemblies show great advantages in improving drug-delivery efficiency, the luminescence properties of materials, molecular recognition and imaging, and the toughness of supramolecular hydrogels, in addition to enabling the construction of multistimuli-responsive assemblies. These features are anticipated to not only promote the development of CD-based supramolecular chemistry but also contribute to the rapid exploitation of these assemblies in diverse interdisciplinary applications.

Synchronous Imaging in Golgi Apparatus and Lysosome Enabled by Amphiphilic Calixarene-Based Artificial Light-Harvesting Systems

Artificial supramolecular light-harvesting systems have expanded various properties on photoluminescence, enabling promising applications on cell imaging, especially for imaging in organelles. Supramolecular light-harvesting systems have been used for imaging in some organelles such as lysosome, Golgi apparatus, and mitochondrion, but developing a supramolecular light-harvesting platform for imaging two organelles synchronously still remains a great challenge. Here, we report a series of lower-rim dodecyl-modified sulfonato-calix[4]arene-mediated supramolecular light-harvesting platforms for efficient light-harvesting from three naphthalene diphenylvinylpyridiniums containing acceptors, Nile Red, and Nile Blue. All of the constructed supramolecular light-harvesting systems possess high light-harvesting efficiency. Furthermore, when the two acceptors are loaded simultaneously in a single light-harvesting donor system for imaging in human prostate cancer cells, organelle imaging in lysosome and Golgi apparatus can be realized at the same time with distinctive wavelength emission. Nile Red receives the light-harvesting energy from the donors, reaching orange emissions (625 nm) in lysosome while Nile Blue shows a near-infrared light-harvesting emission at 675 nm in Golgi apparatus in the same cells. Thus, the light harvesting system provides a pathway for synchronously efficient cell imaging in two distinct organelles with a single type of photoluminescent supramolecular nanoparticles.

A Fluorescent Linear Conjugated Polymer Constructed from Pillararene and Anthracene

Over the past few years, conjugated polymers (CPs) have aroused much attention owing to their rigid conjugated structures, which can perform well in light harvesting and energy transfer and offer great potential in materials chemistry. In this article, we fabricate a new luminescent linear CP p(P[5](OTf)₂-co-9,10-dea) via the Sonogashira coupling of 9,10-diethynylanthracene and trifluoromethanesulfonic anhydride (OTf) modified pillar[5]arene, generating enhanced yellow-green fluorescence emission at around 552 nm. The reaction condition was screened to get a deeper understanding of this polymerization approach, resulting in an excellent yield as high as 92% ultimately. Besides the optical properties, self-assembly behaviors of the CP in low/high concentrations were studied, where interesting adjustable morphologies from tube to sheet were observed. In addition, the fluorescence performance and structural architecture can be disturbed by the host–guest reorganization between the host CP and the guest adiponitrile, suggesting great potential of this CP material in the field of sensing and detection.

Fluorescent TPE Macrocycle Relayed Light-Harvesting System for Bright Customized-Color Circularly Polarized Luminescence

Artificial systems for sequential chirality transmission/amplification and energy relay are perpetual topics that entail learning from nature. However, engineering chiral light-harvesting supramolecular systems remains a challenge. Here, we developed new chiral light-harvesting systems with a sequential Förster resonance energy transfer process where a designed blue-violet-emitting BINOL (1,1'-Bi-2-naphthol) compound, BINOL-di-octadecylamide (BDA), functions as an initiator of chirality and light absorbance, a new green-emitting hexagonal tetraphenylethene-based macrocycle (TPEM) with aggregation-induced emission serves as a conveyor, and Nile red (NiR) or/and a near-infrared dye, tetraphenylethene (TPE)-based benzoselenodiazole (TPESe), are the terminal acceptors. Benefiting from the close contact and large optical overlap between donors and acceptors at each level, triad and tetrad relaying systems sequentially and efficiently furnish chirality transmission/amplification and energy transfer along the cascaded line BDA-TPEM-NiR (or/and TPESe), leading to bright customized-color circularly polarized luminescence (CPL) and bright white-light-emitting CPL (CIE coordinates: 0.33, 0.34) with an amplified dissymmetry factor (glum) of 3.5 × 10-2 over a wide wavelength range. This work provides a new direction for the construction of chiral light-harvesting systems for a broad range of applications in chiroptical physics and chemistry.

Multilayer 3D Chiral Folding Polymers and Their Asymmetric Catalytic Assembly

A novel class of polymers and oligomers of chiral folding chirality has been designed and synthesized, showing structurally compacted triple-column/multiple-layer frameworks. Both uniformed and differentiated aromatic chromophoric units were successfully constructed between naphthyl piers of this framework. Screening monomers, catalysts, and catalytic systems led to the success of asymmetric catalytic Suzuki-Miyaura polycouplings. Enantio- and diastereochemistry were unambiguously determined by X-ray structural analysis and concurrently by comparison with a similar asymmetric induction by the same catalyst in the asymmetric synthesis of a chiral three-layered product. The resulting chiral polymers exhibit intense fluorescence activity in a solid form and solution under specific wavelength irradiation.

Stabilization of Antitumor Agent Busulfan through the Encapsulation within a Water-Soluble Pillar[5]arene

The complexation of antitumor agent busulfan by negatively charged carboxylatopillar[5]arenein water is reported. The encapsulation within carboxylatopillar[5]arenein reduces the hydrolytic degradation of busulfan from 90.7 % to 25.2 % after 24 days and accordingly enhances its stability by providing a hydrophobic shelter for busulfan in water. Moreover, the complexation result in 12 times improvement of water solubility for busulfan. Our result provides a supramolecular approach for stabilizing the anticancer agent busulfan.

Dual-AIEgens in one organoplatinum(II) metallaprism: photoluminescence exploration

Two sets of cis-trans isostructural metallaprisms were constructed from the controlling linkage of a Pt-corner, and a linear and quadrilateral AIE ligand. The combination of two AIEgens of TPE and the Pt-corner into one system endows these isomers with interesting AIE functions.