Potential‐Responsive Surfaces for Manipulation of Cell Adhesion, Release, and Differentiation

Real-time monitoring of voltage-responsive biomolecular binding onto electro-switchable surfaces

Voltage-responsive biosensors capable of monitoring real-time adsorption behavior of biological analytes onto electroactive surfaces offer attractive strategies for disease detection, separations, and other adsorption-dependent analytical techniques. Adsorption of biological analytes onto electrically switchable surfaces can be modelled using neutravidin and biotin. Here, we report self-assembled monolayers formed from voltage-switchable biotinylated molecules on gold surfaces with tunable sensitivity to neutravidin in response to applied voltages. By using electrochemical quartz crystal microbalance (EQCM), we demonstrated real-time switchable behavior of these bio-surfaces and investigate the range of sensitivity by varying the potential of the same surfaces from -400 mV to open circuit potential (+155 mV) to +300 mV. We compared the tunability of the mixed surfaces to bare Au surfaces, voltage inert surfaces, and switchable biotinylated surfaces. Our results indicate that quartz crystal microbalance allows real-time changes in analyte binding behavior, which enabled observing the evolution of neutravidin sensitivity as the applied voltage was shifted. EQCM could in principle be used in kinetic studies or to optimize voltage-switchable surfaces in adsorption-based diagnostics.

Looking both ways: Electroactive biomaterials with bidirectional implications for dynamic cell-material crosstalk

Cells exist in natural, dynamic microenvironmental niches that facilitate biological responses to external physicochemical cues such as mechanical and electrical stimuli. For excitable cells, exogenous electrical cues are of interest due to their ability to stimulate or regulate cellular behavior via cascade signaling involving ion channels, gap junctions, and integrin receptors across the membrane. In recent years, conductive biomaterials have been demonstrated to influence or record these electrosensitive biological processes whereby the primary design criterion is to achieve seamless cell-material integration. As such, currently available bioelectronic materials are predominantly engineered toward achieving high-performing devices while maintaining the ability to recapitulate the local excitable cell/tissue microenvironment. However, such reports rarely address the dynamic signal coupling or exchange that occurs at the biotic-abiotic interface, as well as the distinction between the ionic transport involved in natural biological process and the electronic (or mixed ionic/electronic) conduction commonly responsible for bioelectronic systems. In this review, we highlight current literature reports that offer platforms capable of bidirectional signal exchange at the biotic-abiotic interface with excitable cell types, along with the design criteria for such biomaterials. Furthermore, insights on current materials not yet explored for biointerfacing or bioelectronics that have potential for bidirectional applications are also provided. Finally, we offer perspectives aimed at bringing attention to the coupling of the signals delivered by synthetic material to natural biological conduction mechanisms, areas of improvement regarding characterizing biotic-abiotic crosstalk, as well as the dynamic nature of this exchange, to be taken into consideration for material/device design consideration for next-generation bioelectronic systems.

New buffer systems for photopainting of single biomolecules

We present newly developed buffer systems that significantly improve the efficiency of a photochemically induced surface modification at the single molecule level. Buffers with paramagnetic cations and radical oxygen promoting species facilitate laser-assisted protein adsorption by photobleaching (LAPAP) of single fluorescently labelled oligonucleotides or biotin onto multi-photon-lithography-structured 2D and 3D acrylate scaffolds. Single molecule fluorescence microscopy has been used to quantify photopainting efficiency. We identify specific cation interaction sites for members of the cyanine, coumarin and rhodamine classes of fluorophores using quantum mechanical calculations. We show that our buffer systems provide an up to three-fold LAPAP-efficiency increase for the cyanine fluorophore, while keeping excitation parameters constant.

An Fe-organic framework/arginine-glycine-aspartate peptide-modified sensor for electrochemically detecting nitric oxide released from living cells

Nitric oxide (NO) is a crucial cell-signaling molecule utilized in numerous physiological and pathological processes. Monitoring cellular levels of NO requires a sensor with sufficient sensitivity, transient recording capability, and biocompatibility. Owing to the large surface area and high catalytic activity of the metal-organic framework, Fe-BTC was used for the modification of screen-printed electrodes (SPEs). This study investigates the electrochemical sensing of NO on modified SPEs. Additionally, the introduction of a cell-adhesive molecule, arginine-glycine-aspartate peptide (RGD), considerably improved the cytocompatibility, resulting in superior cell attachment and growth on the SPE. The Fe-BTC/RGD-modified SPE (Fe-BTC/RGD/SPE) exhibited electrocatalytic NO oxidation at 0.8 V, demonstrating a linear response with a detection limit of 11.88 nM over a wide concentration range (0.17-47.37 μM) and a response time of approximately 0.9 s. Subsequently, the as-obtained Fe-BTC/RGD/SPE was successfully utilized for the real-time detection of NO released from human endothelial cells cultured on the electrode. Therefore, the study undertaken shows remarkable potential of Fe-BTC/RGD/SPE for practical applications in biological processes and clinical diagnostics.

Manipulating the Dynamic Adaptivity of a Fluid Interface to Maintain the Multipotency of Mesenchymal Stromal Cells

The native extracellular matrix is highly dynamic with continuous mutual feedback between cells being responsible for many important cell function regulators. However, establishing bidirectional interaction between complex adaptive microenvironments and cells remains elusive. Herein an adaptive biomaterial based on lysozyme monolayers self-assembled at a perfluorocarbon FC40-water interface is reported. The dynamic adaptivity of interfacially assembled protein nanosheets is modulated independently of bulk mechanical properties by covalent crosslinking. This provides a scenario to establish bidirectional interactions of cells with liquid interfaces of varying dynamic adaptivity. This is found that growth and multipotency of human mesenchymal stromal cells (hMSCs) are enhanced at the highly adaptive fluid interface. The multipotency retention of hMSCs is mediated by low cell contractility and metabolomic activity involving the continuous mutual feedback between the cells and materials. Consequently, an understanding of the cells' response to dynamic adaptivity has substantial implications for regenerative medicine and tissue engineering.

Assessing Tumorigenicity in Stem Cell-Derived Therapeutic Products: A Critical Step in Safeguarding Regenerative Medicine

Stem cells hold promise in regenerative medicine due to their ability to proliferate and differentiate into various cell types. However, their self-renewal and multipotency also raise concerns about their tumorigenicity during and post-therapy. Indeed, multiple studies have reported the presence of stem cell-derived tumors in animal models and clinical administrations. Therefore, the assessment of tumorigenicity is crucial in evaluating the safety of stem cell-derived therapeutic products. Ideally, the assessment needs to be performed rapidly, sensitively, cost-effectively, and scalable. This article reviews various approaches for assessing tumorigenicity, including animal models, soft agar culture, PCR, flow cytometry, and microfluidics. Each method has its advantages and limitations. The selection of the assay depends on the specific needs of the study and the stage of development of the stem cell-derived therapeutic product. Combining multiple assays may provide a more comprehensive evaluation of tumorigenicity. Future developments should focus on the optimization and standardization of microfluidics-based methods, as well as the integration of multiple assays into a single platform for efficient and comprehensive evaluation of tumorigenicity.

Selenium-decorated biocompatible honeycomb films with redox-switchable surface for controlling cell adhesion/detachment

HYPOTHESIS

Selenium (Se)-containing compound is sensitive to redox stimulation, showing hydrophobic-hydrophilic reversible transition. Introduction of such compound into honeycomb film could confer on it redox-switchable surface wettability, which is expected to control cell adhesion/detachment behavior.

EXPERIMENTS

Didodecyl selenide was designed and mixed with polystyrene to prepare honeycomb films using "breath figure" method. The film microstructures were characterized by scanning electron microscope and atomic force microscopy, and the arrangement of Se atoms in honeycomb film was determined by X-ray photoelectron spectroscopy and energy dispersive spectrometry. The variation of film wettability upon the alternating stimulation of H₂O₂ and Vc was examined. Then the cell adhesion, proliferation, and controlled detachment on honeycomb films were conducted.

FINDINGS

The introduction of didodecyl selenide helps to form ordered honeycomb film, and Se atoms were found to located on the bottom, pore walls, and top surface of the film. The presence of didodecyl selenide not only greatly improves film biocompatibility by enhancing cell thioredoxin reductase activity, but also imparts the film with H₂O₂-/vitamin C-regulated tunable wettability that controls cell adhesion and detachment. H₂O₂ treatment produces a hydrophilic surface for cell adhesion and proliferation, whereas the addition of vitamin C generates hydrophobic surfaces and allows cells to detach while remaining alive with high activity.

The bioelectrical properties of bone tissue

Understanding the bioelectrical properties of bone tissue is key to developing new treatment strategies for bone diseases and injuries, as well as improving the design and fabrication of scaffold implants for bone tissue engineering. The bioelectrical properties of bone tissue can be attributed to the interaction of its various cell lineages (osteocyte, osteoblast and osteoclast) with the surrounding extracellular matrix, in the presence of various biomechanical stimuli arising from routine physical activities; and is best described as a combination and overlap of dielectric, piezoelectric, pyroelectric and ferroelectric properties, together with streaming potential and electro-osmosis. There is close interdependence and interaction of the various electroactive and electrosensitive components of bone tissue, including cell membrane potential, voltage-gated ion channels, intracellular signaling pathways, and cell surface receptors, together with various matrix components such as collagen, hydroxyapatite, proteoglycans and glycosaminoglycans. It is the remarkably complex web of interactive cross-talk between the organic and non-organic components of bone that define its electrophysiological properties, which in turn exerts a profound influence on its metabolism, homeostasis and regeneration in health and disease. This has spurred increasing interest in application of electroactive scaffolds in bone tissue engineering, to recapitulate the natural electrophysiological microenvironment of healthy bone tissue to facilitate bone defect repair.

Electroactive Biomaterials for Facilitating Bone Defect Repair under Pathological Conditions

Bone degeneration associated with various diseases is increasing due to rapid aging, sedentary lifestyles, and unhealthy diets. Living bone tissue has bioelectric properties critical to bone remodeling, and bone degeneration under various pathological conditions results in significant changes to these bioelectric properties. There is growing interest in utilizing biomimetic electroactive biomaterials that recapitulate the natural electrophysiological microenvironment of healthy bone tissue to promote bone repair. This review first summarizes the etiology of degenerative bone conditions associated with various diseases such as type II diabetes, osteoporosis, periodontitis, osteoarthritis, rheumatoid arthritis, osteomyelitis, and metastatic osteolysis. Next, the diverse array of natural and synthetic electroactive biomaterials with therapeutic potential are discussed. Putative mechanistic pathways by which electroactive biomaterials can mitigate bone degeneration are critically examined, including the enhancement of osteogenesis and angiogenesis, suppression of inflammation and osteoclastogenesis, as well as their anti-bacterial effects. Finally, the limited research on utilization of electroactive biomaterials in the treatment of bone degeneration associated with the aforementioned diseases are examined. Previous studies have mostly focused on using electroactive biomaterials to treat bone traumatic injuries. It is hoped that this review will encourage more research efforts on the use of electroactive biomaterials for treating degenerative bone conditions.

Electric Field-Induced Specific Preconcentration to Enhance DNA-Based Electrochemical Sensing of Hg2+ via the Synergy of Enrichment and Self-Cleaning

Efficient preconcentration is critical for sensitive and selective electrochemical detection of metal ions, but rapid specific enrichment with depressed absorption of interfering ions at the electrode is challenging. Here, we proposed an electric field-induced specific preconcentration to boost the analytical performance of DNA-based electrochemical sensors for Hg²⁺ detection. As for such preconcentration, a positive external electric field was first used to enrich Hg²⁺ at an electrode assembled with T-rich DNA, thus boosting T-Hg²⁺-T recognitions. The following applied inverse electric field strips the nonspecifically absorbed Hg²⁺ and other interfering ions, thus depressing matrix interferences via self-cleaning. Based on this principle, we designed a portable device to realize programmable control of electric fields; a T-Hg²⁺-T recognition-based electrochemical sensor was thus fabricated as a model platform to assess the feasibility of electric field-induced preconcentration. The experimental results revealed that such a strategy decreased the time of T-Hg²⁺-T-based recognition from 60 to 20 min and led to detection with better reproducibility by depressing the influence of free Hg²⁺ as well as interfering ions. This strategy offered Hg²⁺ detection limits of 0.01 pM─three-fold better than that without preconcentration─within 22 min. The proposed preconcentration strategy offers a new way to enhance the analytical performance of sensing at the solid-liquid interface.

Adaptive liquid interfaces induce neuronal differentiation of mesenchymal stem cells through lipid raft assembly

Stem cells and their microenvironment interact cooperatively to dictate their fates. Biomaterials are dynamically remodeled by stem cells, and stem cells sense and translate the changes into cell fate decisions. We have previously reported that adaptive biomaterials composed of fibronectin inserted into protein nanosheets at a liquid interface enhance neuronal differentiation of human mesenchymal stem cells (hMSCs). However, we could not decouple clearly the effect of ligand density from that of fibrillary structure on cellular function and fate. Here we present an adaptive biomaterial based on two-dimensional networks of protein nanofibrils at a liquid–liquid interface. Compared with flat protein nanosheets, this biomaterial enhances neuronal differentiation of hMSCs through a signaling mechanism involving focal adhesion kinase. Lipid raft microdomains in plasma membrane are found to play a central role in which hMSCs rapidly adapt to the dynamic microenvironment at the fluid interface. Our finding has substantial implications for regenerative medicine and tissue engineering.

In this work the authors report how human mesenchymal stem cells rapidly adapt to dynamic microenvironment through lipid raft in membrane microdomains that direct neurogenesis.

Cellular nanointerface of vertical nanostructure arrays and its applications

Vertically standing nanostructures with various morphologies have been developed with the emergence of the micro-/nanofabrication technology. When cells are cultured on them, various bio-nano interfaces between cells and vertical nanostructures would impact the cellular activities, depending on the shape, density, and height of nanostructures. Many cellular pathway activation processes involving a series of intracellular molecules (proteins, RNA, DNA, enzymes, etc.) would be triggered by the cell morphological changes induced by nanostructures, affecting the cell proliferation, apoptosis, differentiation, immune activation, cell adhesion, cell migration, and other behaviors. In addition, the highly localized cellular nanointerface enhances coupled stimulation on cells. Therefore, understanding the mechanism of the cellular nanointerface can not only provide innovative tools for regulating specific cell functions but also offers new aspects to understand the fundamental cellular activities that could facilitate the precise monitoring and treatment of diseases in the future. This review mainly describes the fabrication technology of vertical nanostructures, analyzing the formation of cellular nanointerfaces and the effects of cellular nanointerfaces on cells' fates and functions. At last, the applications of cellular nanointerfaces based on various nanostructures are summarized.

Recapitulating dynamic ECM ligand presentation at biomaterial interfaces: Molecular strategies and biomedical prospects

The extracellular matrix (ECM) provides not only physical support for the tissue structural integrity, but also dynamic biochemical cues capable of regulating diverse cell behaviors and functions. Biomaterial surfaces with dynamic ligand presentation are capable of mimicking the dynamic biochemical cues of ECM, showing ECM-like functions to modulate cell behaviors. This review paper described an overview of present dynamic biomaterial interfaces by focusing on currently developed molecular strategies for dynamic ligand presentation. The paradigmatic examples for each strategy were separately discussed. In addition, the regulation of some typical cell behaviors on these dynamic biointerfaces including cell adhesion, macrophage polarization, and stem cell differentiation, and their potential applications in pathogenic cell isolation, single cell analysis, and tissue engineering are highlighted. We hope it would not only clarify a clear background of this field, but also inspire to exploit novel molecular strategies and more applications to match the increasing demand of manipulating complex cellular processes in biomedicine.

A Topologically Engineered Gold Island for Programmed In Vivo Stem Cell Manipulation

E ven a well-designed system can only control stem cell adhesion, release, and differentiation, while other cell manipulations such as in situ labeling and retention in target tissues, are difficult to achieve in the same system. Herein, native ligand cluster-mimicking islands, composed of topologically engineered ligand, anchoring point AuNP, nuclease mimetics Ce IV complexes and magnetic core Fe 3 O 4 , are designed to facilitate comprehensive cell manipulations in a programmable manner. Three islands with different amounts of AuNPs are constructed, which means tunable interligand spacing within a cluster. These nanostructures are chemically coupled to a substrate using DNA tethers. Under tissue-penetrative magnetic field, this integrated system promotes stem cell adhesion, proliferation, mechanosensing, differentiation, detachment, in situ effective magnetic labeling and retention both in vitro and in vivo , offering fascinating opportunities for biomimetic matrix in regenerative medicine.

Cell-Traction-Triggered On-Demand Electrical Stimulation for Neuron-Like Differentiation

Electromechanical interaction of cells and extracellular matrix are ubiquitous in biological systems. Understanding the fundamentals of this interaction and feedback is critical to design next-generation electroactive tissue engineering scaffold. Herein, based on elaborately modulating the dynamic mechanical forces in cell microenvironment, the design of a smart piezoelectric scaffold with suitable stiffness analogous to that of collagen for on-demand electrical stimulation is reported. Specifically, it generated a piezoelectric potential, namely a piezopotential, to stimulate stem cell differentiation with cell traction as a loop feedback signal, thereby avoiding the unfavorable effect of early electrical stimulation on cell spreading and adhesion. This is the first time to adapt to the dynamic microenvironment of cells and meet the electrical stimulation of cells in different states by a constant scaffold, diminishing the cumbersomeness of inducing material transformation or trigging by an external stimulus. This in situ on-demand electrical stimulation based on cell-traction-mediated piezopotential paves the way for smart scaffolds design and future bioelectronic therapies.

Mechanistically Scoping Cell-Free and Cell-Dependent Artificial Scaffolds in Rebuilding Skeletal and Dental Hard Tissues

Rebuilding mineralized tissues in skeletal and dental systems remains costly and challenging. Despite numerous demands and heavy clinical burden over the world, sources of autografts, allografts, and xenografts are far limited, along with massive risks including viral infections, ethic crisis, and so on. Per such dilemma, artificial scaffolds have emerged to provide efficient alternatives. To date, cell-free biomimetic mineralization (BM) and cell-dependent scaffolds have both demonstrated promising capabilities of regenerating mineralized tissues. However, BM and cell-dependent scaffolds have distinctive mechanisms for mineral genesis, which makes them methodically, synthetically, and functionally disparate. Herein, these two strategies in regenerative dentistry and orthopedics are systematically summarized at the level of mechanisms. For BM, methodological and theoretical advances are focused upon; and meanwhile, for cell-dependent scaffolds, it is demonstrated how scaffolds orchestrate osteogenic cell fate. The summary of the experimental advances and clinical progress will endow researchers with mechanistic understandings of artificial scaffolds in rebuilding hard tissues, by which better clinical choices and research directions may be approached.

Tumor-activatable biomineralized nanotherapeutics for integrative glucose starvation and sensitized metformin therapy

Metformin is a clinically-approved anti-diabetic drug with emerging antitumor potential, but its antitumor activity is highly susceptible to local glucose abundance. Herein, we construct a nanotherapeutic platform based on biocompatible constituents to sensitize tumor cells for metformin therapy via cooperative glucose starvation. The nanoplatform was synthesized through the spontaneous biomineralization of glucose oxidase (GOx) and metformin in amorphous calcium phosphate nanosubstrate, which was further modified with polyethylene glycol and cRGD ligands. This biomineralized nanosystem could efficiently deliver the therapeutic payloads to tumor cells in a targeted and bioresponsive manner. Here GOx could catalyze the oxidation of glucose into gluconic acid and H₂O₂, thus depleting the glucose in tumor intracellular compartment while accelerating the release of the entrapped therapeutic payloads. The selective glucose deprivation would not only disrupt tumor energy metabolism, but also upregulate the PP2A regulatory subunit B56δ and sensitize tumor cells to the metformin-induced CIP2A inhibition, leading to efficient apoptosis induction via PP2A-GSK3β-MCL-1 axis with negligible side effects. This study may offer new avenues for targeted tumor therapy in the clinical context.

2D biointerfaces to study stem cell-ligand interactions

Stem cells have great potential in the field of tissue engineering and regenerative medicine due to their inherent regenerative capabilities. However, an ongoing challenge within their clinical translation is to elicit or predict the desired stem cell behavior once transplanted. Stem cell behavior and function are regulated by their interaction with biophysical and biochemical signals present in their natural environment (i.e., stem cell niches). To increase our understanding about the interplay between stem cells and their resident microenvironments, biointerfaces have been developed as tools to study how these substrates can affect stem cell behaviors. This article aims to review recent developments on fabricating cell-instructive interfaces to control cell adhesion processes towards directing stem cell behavior. After an introduction on stem cells and their natural environment, static surfaces exhibiting predefined biochemical signals to probe the effect of chemical features on stem cell behaviors are discussed. In the third section, we discuss more complex dynamic platforms able to display biochemical cues with spatiotemporal control using on-off ligand display, reversible ligand display, and ligand mobility. In the last part of the review, we provide the reader with an outlook on future designs of biointerfaces. STATEMENT OF SIGNIFICANCE: Stem cells have great potential as treatments for many degenerative disorders prevalent in our aging societies. However, an ongoing challenge within their clinical translation is to promote stem cell mediated regeneration once they are transplanted in the body. Stem cells reside within our bodies where their behavior and function are regulated by interactions with their natural environment called the stem cell niche. To increase our understanding about the interplay between stem cells and their niche, 2D materials have been developed as tools to study how specific signals can affect stem cell behaviors. This article aims to review recent developments on fabricating cell-instructive interfaces to control cell adhesion processes towards directing stem cell behavior.

Electroactive Biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: Design and Applications

During natural tissue regeneration, tissue microenvironment and stem cell niche including cell-cell interaction, soluble factors, and extracellular matrix (ECM) provide a train of biochemical and biophysical cues for modulation of cell behaviors and tissue functions. Design of functional biomaterials to mimic the tissue/cell microenvironment have great potentials for tissue regeneration applications. Recently, electroactive biomaterials have drawn increasing attentions not only as scaffolds for cell adhesion and structural support, but also as modulators to regulate cell/tissue behaviors and function, especially for electrically excitable cells and tissues. More importantly, electrostimulation can further modulate a myriad of biological processes, from cell cycle, migration, proliferation and differentiation to neural conduction, muscle contraction, embryogenesis, and tissue regeneration. In this review, endogenous bioelectricity and piezoelectricity are introduced. Then, design rationale of electroactive biomaterials is discussed for imitating dynamic cell microenvironment, as well as their mediated electrostimulation and the applying pathways. Recent advances in electroactive biomaterials are systematically overviewed for modulation of stem cell fate and tissue regeneration, mainly including nerve regeneration, bone tissue engineering, and cardiac tissue engineering. Finally, the significance for simulating the native tissue microenvironment is emphasized and the open challenges and future perspectives of electroactive biomaterials are concluded.

A Programmable Toolkit to Dynamically Signal Cells Using Peptide Strand Displacement

The native extracellular matrix communicates and interacts with cells by dynamically displaying signals to control their behavior. Mimicking this dynamic environment in vitro is essential in order to unravel how cell-matrix interactions guide cell fate. Here, we present a synthetic platform for the temporal display of cell-adhesive signals using coiled-coil peptides. By designing an integrin-engaging coiled-coil pair to have a toehold (unpaired domain), we were able to use a peptide strand displacement reaction to remove the cell cue from the surface. This allowed us to test how the user-defined display of RGDS ligands at variable duration and periodicity of ligand exposure influence cell spreading degree and kinetics. Transient display of α_Vβ₃-selective ligands instructed fibroblast cells to reversibly spread and contract in response to changes in ligand exposure over multiple cycles, exhibiting a universal kinetic response. Also, cells that were triggered to spread and contract repeatedly exhibited greater enrichment of integrins in focal adhesions versus cells cultured on persistent RGDS-displaying surfaces. This dynamic platform will allow us to uncover the molecular code by which cells sense and respond to changes in their environment and will provide insights into ways to program cellular behavior.

Remote Control of Time-Regulated Stretching of Ligand-Presenting Nanocoils In Situ Regulates the Cyclic Adhesion and Differentiation of Stem Cells

Native extracellular matrix (ECM) can exhibit cyclic nanoscale stretching and shrinking of ligands to regulate complex cell-material interactions. Designing materials that allow cyclic control of changes in intrinsic ligand-presenting nanostructures in situ can emulate ECM dynamicity to regulate cellular adhesion. Unprecedented remote control of rapid, cyclic, and mechanical stretching ("ON") and shrinking ("OFF") of cell-adhesive RGD ligand-presenting magnetic nanocoils on a material surface in five repeated cycles are reported, thereby independently increasing and decreasing ligand pitch in nanocoils, respectively, without modulating ligand-presenting surface area per nanocoil. It is demonstrated that cyclic switching "ON" (ligand nanostretching) facilitates time-regulated integrin ligation, focal adhesion, spreading, YAP/TAZ mechanosensing, and differentiation of viable stem cells, both in vitro and in vivo. Fluorescence resonance energy transfer (FRET) imaging reveals magnetic switching "ON" (stretching) and "OFF" (shrinking) of the nanocoils inside animals. Versatile tuning of physical dimensions and elements of nanocoils by regulating electrodeposition conditions is also demonstrated. The study sheds novel insight into designing materials with connected ligand nanostructures that exhibit nanocoil-specific nano-spaced declustering, which is ineffective in nanowires, to facilitate cell adhesion. This unprecedented, independent, remote, and cytocompatible control of ligand nanopitch is promising for regulating the mechanosensing-mediated differentiation of stem cells in vivo.

Stimuli-responsive biomaterials for cardiac tissue engineering and dynamic mechanobiology

Since the term "smart materials" was put forward in the 1980s, stimuli-responsive biomaterials have been used as powerful tools in tissue engineering, mechanobiology, and clinical applications. For the purpose of myocardial repair and regeneration, stimuli-responsive biomaterials are employed to fabricate hydrogels and nanoparticles for targeted delivery of therapeutic drugs and cells, which have been proved to alleviate disease progression and enhance tissue regeneration. By reproducing the sophisticated and dynamic microenvironment of the native heart, stimuli-responsive biomaterials have also been used to engineer dynamic culture systems to understand how cardiac cells and tissues respond to progressive changes in extracellular microenvironments, enabling the investigation of dynamic cell mechanobiology. Here, we provide an overview of stimuli-responsive biomaterials used in cardiovascular research applications, with a specific focus on cardiac tissue engineering and dynamic cell mechanobiology. We also discuss how these smart materials can be utilized to mimic the dynamic microenvironment during heart development, which might provide an opportunity to reveal the fundamental mechanisms of cardiomyogenesis and cardiac maturation.

π-Donor/π-Acceptor Interactions for the Encapsulation of Neurotransmitters on Functionalized Polysilicon-Based Microparticles

Bipyridinium salts, commonly known as viologens, are π-acceptor molecules that strongly interact with π-donor compounds, such as porphyrins or amino acids, leading their self-assembling. These properties have promoted us to functionalize polysilicon microparticles with bipyridinium salts for the encapsulation and release of π-donor compounds such as catecholamines and indolamines. In this work, the synthesis and characterization of four gemini-type amphiphilic bipyridinium salts (1·4PF₆–4·4PF₆), and their immobilization either non-covalently or covalently on polysilicon surfaces and microparticles have been achieved. More importantly, they act as hosts for the subsequent incorporation of π-donor neurotransmitters such as dopamine, serotonin, adrenaline or noradrenaline. Ultraviolet-visible absorption and fluorescence spectroscopies and high-performance liquid chromatography were used to detect the formation of the complex in solution. The immobilization of bipyridinium salts and neurotransmitter incorporation on polysilicon surfaces was corroborated by contact angle measurements. The reduction in the bipyridinium moiety and the subsequent release of the neurotransmitter was achieved using ascorbic acid, or Vitamin C, as a triggering agent. Quantification of neurotransmitter encapsulated and released from the microparticles was performed using high-performance liquid chromatography. The cytotoxicity and genotoxicity studies of the bipyridinium salt 1·4PF₆, which was selected for the non-covalent functionalization of the microparticles, demonstrated its low toxicity in the mouse fibroblast cell line (3T3/NIH), the human liver carcinoma cell line (HepG2) and the human epithelial colorectal adenocarcinoma cell line (Caco-2).

Nanostructured Architectures Promote the Mesenchymal-Epithelial Transition for Invasive Cells

Dynamic modulation of cellular phenotypes between the epithelial and mesenchymal states-the epithelial-mesenchymal transition (EMT) and mesenchymal-epithelial transition (MET)-plays an important role in cancer progression. Nanoscale topography of culture substrates is known to affect the migration and EMT of cancer cells. However, existing platforms heavily rely on simple geometries such as grooved lines or cylindrical post arrays, which may oversimplify the complex interaction between cells and nanotopography in vivo. Here, we use electrodeposition to construct finely controlled surfaces with biomimetic fractal nanostructures as a means of examining the roles of nanotopography during the EMT/MET process. We found that nanostructures in the size range of 100 to 500 nm significantly promote MET for invasive breast and prostate cancer cells. The "METed" cells acquired distinct expression of epithelial and mesenchymal markers, displayed perturbed morphologies, and exhibited diminished migration and invasion, even after the removal of a nanotopographical stimulus. The phosphorylation of GSK-3 was decreased, which further tuned the expression of Snail and modulated the EMT/MET process. Our findings suggest that invasive cancer cells respond to the geometries and dimensions of complex nanostructured architectures.