Concise Access to the Skeleton of Protoilludane Sesquiterpenes through a Photochemical Reaction Cascade: Total Synthesis of Atlanticone C

Unveiling the Use of 1,1-Bis(triflyl)ethylene as CF3SO2CH═CH2 Source with the Assistance of (n-Bu)4NF: Synthesis of 3-[(Trifluoromethyl)sulfonyl]cyclobut-1-enes

Allylic sulfone-embedded cyclobutenes have been prepared in one pot from alkynes. The carbocycle and the alkenyl sulfone moieties were installed through consecutive bis(triflyl)cyclobutenylation of a triple bond and tetra-n-butylammonium fluoride (TBAF)-assisted hydrodesulfonylation of an allylic bis(sulfone). It is noteworthy that 1,1-bis(triflyl)ethylene acts as a CF3SO2CH═CH2 source for the first time.

Enantioselective Intramolecular ortho Photocycloaddition Reactions of 2-Acetonaphthones

2-Acetonaphthones, which bear an alkenyl group tethered to its C1 carbon atom via an oxygen atom, were found to undergo an enantioselective intramolecular ortho photocycloaddition reaction. A chiral oxazaborolidine Lewis acid leads to a bathochromic absorption shift of the substrate and enables an efficient enantioface differentiation. Visible light irradiation (λ=450 nm) triggers the reaction which is tolerant of various groups at almost any position except carbon atom C8 (16 examples, 53-99 % yield, 80-97 % ee). Consecutive reactions were explored including a sensitized rearrangement to tetrahydrobiphenylenes, which occurred with full retention of configuration. Evidence was collected that the catalytic photocycloaddition occurs via triplet intermediates, and the binding mode of the acetonaphthone to the chiral Lewis acid was elucidated by DFT calculations.

Photo-induced intramolecular dearomative [5 + 4] cycloaddition of arenes for the construction of highly strained medium-sized-rings

Medium-sized-ring compounds have been recognized as challenging synthetic targets in organic chemistry. Especially, the difficulty of synthesis will be augmented if an E-olefin moiety is embedded. Recently, photo-induced dearomative cycloaddition reactions that proceed via energy transfer mechanism have witnessed significant developments and provided powerful methods for the organic transformations that are not easily realized under thermal conditions. Herein, we report an intramolecular dearomative [5 + 4] cycloaddition of naphthalene-derived vinylcyclopropanes under visible-light irradiation and a proper triplet photosensitizer. The reaction affords dearomatized polycyclic molecules possessing a nine-membered-ring with an E-olefin moiety in good yields (up to 86%) and stereoselectivity (up to 8.8/1 E/Z). Detailed computational studies reveal the origin behind the favorable formation of the thermodynamically less stable isomers. Diverse derivations of the dearomatized products have also been demonstrated.

Intramolecular Alkyne-de Mayo Reaction Using the Enol Methylene Acetal Linker: Experimental Implementation and Computational Simulation

The enol-linked intramolecular alkyne-de Mayo reaction is a photochemically triggered cascade reaction suitable for the synthesis of substituted dihydrotropones by two-carbon ring expansion of enol ethers of cyclopentane-1,3-dion. We report on the implementation of the methylene acetal linker and the isolation of the initial (2 + 2) photocycloadduct in substances. We have investigated in depth the modus operandi of the ring-opening of the π-donor-π-acceptor cyclobutene derivatives by computational chemistry.

Arene Activation through Iminium Ions: Product Diversity from Intramolecular Photocycloaddition Reactions

While 2-alk-ω-enyloxy-sustituted benzaldehydes do not display any photochemical reactivity at the arene core, the respective iminium perchlorates were found to undergo efficient reactions either upon direct irradiation (λ=366 nm) or under sensitizing conditions (λ=420 nm, 2.5 mol% thioxanthen-9-one). Three pathways were found: (a) Most commonly, the reaction led to benzoxacyclic products in which the olefin in the tether underwent a formal, yet unprecedented carboformylation (13 examples, 44-99 % yield). The cascade process occurred with high diastereoselectivity and was found to be stereoconvergent. (b) If a substituent resides in the 3-position of the benzene ring, a meta photocycloaddition was observed which produced tetracyclic skeletons with five stereogenic centers in excellent regio- and diastereoselectivity (2 examples, 58-79 % yield). (c) If the tether was internally substituted at the alkene, an arene photocycloaddition was avoided and an azetidine was formed in an aza Paternò-Büchi reaction (2 examples, 95-98 % yield).

The Awakening of a Sleeping Beauty: The ortho Photocycloaddition in the Total Synthesis of Protoilludane- and Prezizaene-Type ­Sesquiterpenes

Photochemical cascade (domino) reactions provide a unique opportunity for the construction of complex molecular architectures. Specifically, an intramolecular ortho photocycloaddition of 7-(alkenyloxy)-indanones triggers a sequence of consecutive reactions that can lead in a single operation to the complete skeleton of two important classes of sesquiterpenes: protoilludanes and prezizaenes. In the former case, two transformations follow the initial photocycloaddition, while in the latter case, there are three consecutive transformations, two of which are initiated by a photon. Remarkably, the reaction cascades proceed with exquisite diastereoselectivity, generating three (protoilludane) or five (prezizaene) stereogenic centers with defined relative configurations.

1 Introduction

2 First Encounter and Initial Studies

3 Protoilludane-Type Sesquiterpenes

4 Prezizaene-Type Sesquiterpenes

5 Enantioselectivity

6 Perspective and Summary

Facile access to fused 2D/3D rings via intermolecular cascade dearomative [2 + 2] cycloaddition/rearrangement reactions of quinolines with alkenes

Hybrid fused two-dimensional/three-dimensional (2D/3D) rings are important pharmacophores in drugs owing to their unique structural and physicochemical properties. Preparation of these strained ring systems often requires elaborate synthetic effort and exhibits low efficiency, thus representing a limiting factor in drug discovery. Here, we report two types of energy-transfer-mediated cascade dearomative [2 + 2] cycloaddition/rearrangement reactions of quinoline derivatives with alkenes, which provide a straightforward avenue to 2D/3D pyridine-fused 6−5−4−3- and 6−4−6-membered ring systems. Notably, this energy-transfer-mediated strategy features excellent diastereoselectivity that bypasses the general reactivity and selectivity issues of photochemical [2 + 2] cycloaddition of various other aromatics. Tuning the aza-arene substitutions enabled selective diversion of the iridium photocatalysed energy transfer manifold towards either cyclopropanation or cyclobutane-rearrangement products. Density functional theory calculations revealed a cascade energy transfer scenario to be operative.

Total syntheses of strained polycyclic terpenes

Terpenoids constitute a broad class of natural compounds with tremendous variability in structure and bioactivity, which resulted in a strong interest of the chemical community to this class of natural products over the last 150 years. The presence of strained small rings renders the terpenoid targets interesting for chemical synthesis, due to limited number of available methods and stability issues. In this feature article, a number of recent examples of total syntheses of terpenoids with complex carbon frameworks featuring small rings are discussed. Specific emphasis is given to the new developments in strategical and tactical approaches to construction of such systems.

Concise Total Synthesis of Agarozizanol B via a Strained Photocascade Intermediate

The prezizane-type sesquiterpene agarozizanol B was synthesized employing a photochemical cascade reaction as the key step. Starting from a readily available 1-indanone with a tethered olefin, a strained tetracyclic skeleton was assembled which contained all carbon atoms of the sesquiterpene with the correct relative configuration. The conversion into the tricyclic prezizane skeleton was accomplished by a strategic cyclopropane bond cleavage. Prior to the cyclopropane ring opening an adaption of the oxidation state was required, which could be combined with a reductive resolution step. After removal of two functional groups, the natural product was obtained both in racemic form or, if resolved, as the (+)-enantiomer which was shown to be identical to the natural product.

Photocycloadditions of Arenes Derived from Lignin

Intramolecular photocycloaddition reactions of 3,4-alkoxybenzonitriles derived from vanillin with alkenes have been investigated. In contrast to previous reports on photochemical reactions with these compounds, mainly [2 + 3] cycloaddition has been observed. A competing [2 + 2] photocycloaddition plays a minor role. Most probably, these additions occur at the singlet state S₁. In the case of a triplet reaction, a different regioselectivity of the [2 + 2] cycloaddition would be observed. Linear and angular [2 + 3] cycloadducts are formed as major products. The first isomer is transformed in the second one by a photochemical vinyl-cyclopropane rearrangement, which increases the selectivity of the reaction. The influence of the substitution pattern on the reactivity and the selectivity has also been investigated.

Visible-Light-Induced Dearomatization of Indoles/Pyrroles with Vinylcyclopropanes: Expedient Synthesis of Structurally Diverse Polycyclic Indolines/Pyrrolines

Visible-light-induced cycloaddition reactions initiated via energy-transfer processes have recently evolved as powerful methods for the construction of strained cyclic molecules that are not easily accessed using known ground-state synthetic methods. Particularly, the reactions initiated by the excitation of aromatic rings provide an alternative solution to the direct transformations of aromatic feedstocks under the scheme of dearomatization. Vinylcyclopropanes (VCPs) are well-known reagents in radical clock experiments, working as a probe to detect transient radical intermediates. However, the synthetic applications in this regard still remain limited due to uncontrollable selectivities. Herein, we report visible-light-induced dearomatization of indole- or pyrrole-tethered VCPs, in which several competitive reaction pathways, including [5 + 2], [2 + 2], interrupted [5 + 2], and [5 + 4] cycloadditions, can be well regulated by engineering substrate structures and tuning reaction conditions. The reaction mechanism has been explored by combined experimental and computational investigations. These reactions provide a convenient method to synthesize structurally diverse polycyclic molecules with high efficiency and good selectivity.

Enantioselective Cyclobutenylation of Olefins Using N-Sulfonyl-1,2,3-Triazoles as Vicinal Dicarbene Equivalents

Cyclobutenes are highly useful synthetic intermediates as well as important motifs in bioactive small molecules. Herein, we report a regio-, chemo-, and enantioselective synthesis of cyclobutenes from olefins using N-sulfonyl-1,2,3-triazoles as vicinal dicarbene equivalents or alkyne [2 + 2] cycloaddition surrogates. Terminal and cis-olefins can be transformed into enantioenriched cyclopropanes via rhodium catalysis. Then, in one pot, treatment of these intermediates with tosyl hydrazide and base effects diazo formation followed by rhodium-catalyzed ring expansion to yield enantioenriched cyclobutenes. These cyclobutenes can be transformed into highly substituted, enantioenriched cyclobutanes, including structures relevant to natural product scaffolds.

Pd-Catalyzed Cascade Reactions of Aziridines: One-Step Access to Complex Tetracyclic Amines

The combination of palladium catalysis and thermal cycloaddition is shown to transform tricyclic aziridines into complex, stereodefined tetracyclic products in a single step. This highly unusual cascade process involves a diverted Tsuji-Trost sequence leading to a surprisingly facile intramolecular Diels-Alder reaction. The starting materials are accessible on multigram scales from the photochemical rearrangement of simple pyrroles. The tetracyclic amine products can be further elaborated through routine transformations, highlighting their potential as scaffolds for medicinal chemistry.

Total synthesis of natural products using photocycloaddition reactions of arenes

The photocycloaddition reaction of benzene with alkenes has become a significant approach for organic chemists and thus has been frequently utilized as a key step in the total synthesis of natural products. In this mini-review, the recent developments in [4 + 2] and [2 + 2] photocycloaddition reactions will be emphasized in constructing core scaffolds of complex natural products. By combining them together, we aim to demonstrate the utility and reinstate the importance of this methodology.

Visible Light-Induced Pericyclic Cascade Reaction for the Synthesis of Quinolinone Derivatives with an Oxabicyclo[4.2.0]octene Skeleton

A photoinduced pericyclic cascade reaction has been developed to afford oxabicyclo[4.2.0]octenes. Mechanistic studies show that this reaction undergoes [2 + 2]-photocycloaddition, base-promoted elimination, retro-4π-electrocyclization, [1,5]-H shift, and 4π-electrocyclization procedures. This reaction features wide substrate scope, good functional group tolerance, and excellent diastereoselectivity.

3-(Methoxycarbonyl)Cyclobutenone as a Reactive Dienophile in Enantioselective Diels-Alder Reactions Catalyzed by Chiral Oxazaborolidinium Ions

Cyclobutenone has been used as a highly reactive dienophile in Diels-Alder reactions, however, no enantioselective example has been reported. We disclose herein a chiral oxazaborolidine-aluminum bromide catalyzed enantioselective Diels-Alder reaction of 3-alkoxycarbonyl cyclobutenone with a variety of dienes. Furthermore, a total synthesis of (-)-kingianin F was completed for the first time via enantioenriched cycloadduct bicyclo[4.2.0]octane derivative.

Advances in polycyclization cascades in natural product synthesis

Cascade reactions are among the most powerful means to achieve the construction of multiple ring systems in a single step. This tutorial review describes recent advances in the use of polycyclization cascades in natural product synthesis.

A Review of Fungal Protoilludane Sesquiterpenoid Natural Products

Natural products have been a great source for drug leads, due to a vast majority possessing unique chemical structures. Such an example is the protoilludane class of natural products which contain an annulated 5/6/4-ring system and are almost exclusively produced by fungi. They have been reported to possess a diverse range of bioactivities, including antimicrobial, antifungal and cytotoxic properties. In this review, we discuss the isolation, structure elucidation and any reported bioactivities of this compound class, including establishment of stereochemistry and any total syntheses of these natural products. A total of 180 protoilludane natural products, isolated in the last 70 years, from fungi, plant and marine sources are covered, highlighting their structural diversity and potential in drug discovery.

Diastereoselective Rhodium-Catalyzed Hydrogenation of 2-Oxindoles and 3,4-Dihydroquinolones

The benzene ring of indolin-2-ones (2-oxindoles) and 3,4-dihydroquinol-2-ones was converted to a saturated cyclohexane ring by hydrogenation in the presence of the rhodium complex ^Cy(CAAC)Rh(cod)Cl. The stereoselectivity of the process was found to be high with respect to both external substituent R¹ within the saturated part of the heterocyclic ring and substituent X on the benzene ring. Twenty-one hexahydroindolin-2(3H)-ones (70-99% yield, dr = 83/17 to >99/1) and twelve octahydro-2(1H)-quinolinones (87-96% yield, dr = 64/36 to >99/1) were obtained with the major diastereoisomer exhibiting the hydrogen atoms in an all-cis arrangement. The high tolerance toward functional groups and the compatibility with existing stereogenic centers are key features of the hydrogenation protocol presented here.

Formation of Tetrahydrothiophenes via a Thia-Paternò-Büchi-Initiated Domino Photochemical Reaction

We have established photochemical access to thietane or tetrahydrothiophene compounds from thiobenzophenone derivatives and acrylonitrile, wherein the product selectivity is controlled by a simple adjustment of the reagent concentration in solution. Small libraries of five-membered ring sulfur-containing compounds were prepared through a thia-Paternò-Büchi reaction, followed by a previously unknown regioselective photochemical ring enlargement reaction in a domino process or a stepwise fashion. A mechanism is proposed to rationalize this ring enlargement reaction via a carbene species provided from photoexcited thiocarbonyl compounds.

Concise Total Synthesis of (+)-Atlanticone C

The first enantioselective total synthesis of (+)-atlanticone C is described. The complex tricyclic protoilludane core was rapidly assembled by a photochemical reaction cascade starting from an easily accessible indanone precursor (3 steps). Optimization of an enantioselective Corey–Bakshi–Shibata reduction permitted a catalytic chiral reso­lution of the racemic photoproduct (45% over two steps; up to 98% ee). The enantiomerically enriched photoproduct was efficiently transformed into the (+)-enantiomer of atlanticone C (10 steps; 18% yield), and the absolute configuration of naturally occurring (–)-atlanticone C was thereby determined.

Ring-fused cyclobutanes via cycloisomerization of alkylidenecyclopropane acylsilanes

A novel Lewis acid-catalyzed cycloisomerization of alkylidenecyclopropane acylsilanes is disclosed. The readily available starting materials participate in tandem Prins addition/ring expansion/1,2-silyl shift to grant access to bicyclo[4.2.0]octanes and bicyclo[3.2.0]heptanes, which are common motifs in terpenoid natural products. Notably, the transformation relies on the ability of acylsilanes to act sequentially as acceptors and donors on the same carbon atom.

A novel Lewis acid-catalyzed cycloisomerization of alkylidenecyclopropane acylsilanes is disclosed that involves tandem Prins addition/ring expansion/1,2-silyl shift to grant access to bicyclo[4.2.0]octanes and bicyclo[3.2.0]heptanes.

Complex Carbocyclic Skeletons from Aryl Ketones through a Three-Photon Cascade Reaction

Starting from readily available 7-substituted 1-indanones, products with a tetracyclo[5.3.1.01,7 04,11 ]undec-2-ene skeleton were obtained upon irradiation at λ=350 nm (eight examples, 49-67 % yield). The assembly of the structurally complex carbon framework proceeds in a three-photon process comprising an ortho photocycloaddition, a disrotatory [4π] photocyclization, and a di-π-methane rearrangement. The flat aromatic core of the starting material is converted into a functionalized polycyclic hydrocarbon with exit vectors in three dimensions. Ring opening reactions at the central cyclopropane ring were explored, which enable the preparation of tricyclo[5.3.1.04,11 ]undec-2-enes and of tricyclo[6.2.1.01,5 ]undecanes.

The Application of Dioxygenase-Based Chemoenzymatic Processes to the Total Synthesis of Natural Products

This Minireview describes the exploitation of certain enzymatically derived, readily accessible, and enantiomerically pure cis-1,2-dihydrocatechols as starting materials in the chemical synthesis of a range of biologically active natural products, most notably sesquiterpenoids and alkaloids.

Concise Access to the Skeleton of Protoilludane Sesquiterpenes through a Photochemical Reaction Cascade: Total Synthesis of Atlanticone C

In a single photochemical operation (λ≥350 nm) an easily accessible indanone derivative was converted into a structurally complex precursor of the protoilludane sesquiterpenes. The product (60 % yield) contains all 15 carbon atoms of the skeleton in the required connectivity and was transformed into the natural product atlanticone C (9 steps, 6 % overall yield). In addition, it was shown that other protoilludanes, such as Δ⁶ -protoilludene and paesslerin A, can be prepared in a concise fashion via the photochemical key intermediate. The photochemical reaction cascade comprises an ortho photocycloaddition, a thermal disrotatory ring opening and a regioselective disrotatory [4π] photocyclization.