Hybrid Halide Perovskites: Discussions on Terminology and Materials

Recent strategies for triplet-state emission regulation toward non-lead organic-inorganic metal halides

Organic-inorganic metal halides (OIMHs) have strengthened the development of triplet-state emission materials due to their excellent luminescence performance. Due to the inherent toxicity of lead (Pb) significantly limiting its further advancement, numerous studies have been conducted to regulate triplet-state emission of non-Pb OIMHs, and several feasible strategies have been proposed. However, most of the non-Pb OIMHs reported have a relatively short lifetime or a low luminescence efficiency, not in favor of their application. In this review, we provide a summary of recent reports on the regulation of triplet-state emissions in non-Pb OIMHs to provide benefits for the design of innovative luminescent materials. Our focus is primarily on exploring the internal and external factors that influence the triplet-state emission. Starting from the luminescence mechanism, the current strategies for regulating triplet-state emissions are summarized. Moreover, by manipulating these strategies, it becomes feasible to achieve triplet-state emissions that span a range of colors from blue to red, and even extend into the near-infrared spectrum with high luminescence efficiency, while also increasing their lifetimes. This review not only provides fresh insights into the advancement of triplet-state emissions in OIMHs but also integrates experimental and theoretical perspectives to illuminate the trajectory of future research endeavors.

Spacer Conformation Induced Multiple Hydrogen Bonds in 2D Perovskite toward Highly Efficient Optoelectronic Devices

Two-dimensional (2D) Dion-Jacobson (DJ) perovskites typically outperform Ruddlesden-Popper (RP) analogs in terms of photodetection (PD). However, the mechanism behind this enhanced performance remains elusive. Theoretical calculations for elucidating interlayer spacer conformation-induced multiple hydrogen bonds in 2D perovskite are presented, along with the synthesis of DPAPbBr4 (DPB) single crystals (SCs) and their PD properties under X-ray/ultraviolet (UV) excitation. The high-quality DPB SC enhances PD with exceptional photoresponse attributes, including a high on/off ratio (4.89 × 104), high responsivity (2.44 A W⁻1), along with large dynamic linear range (154 dB) and low detection limit (7.1 nW cm⁻2), which are currently the best results among 2D perovskite SC detectors, respectively. Importantly, high-resolution images are obtained under UV illumination with weak light levels. The SC X-ray detector exhibits a high sensitivity of 663 µC Gyair⁻1 cm-2 at 10 V and a detection limit of 1.44 µGyair s⁻1. This study explores 2D DJ perovskites for efficient and innovative optoelectronic applications.

Perovskite versus Nonperovskite: Modulating the Nature and Optical Properties of One-Dimensional Chiral Lead-Bromide Networks

In the last 5 years, low-dimensional chiral metal-halide semiconductors have attracted great interest in the generation of chiroptical activity. Among this new family of materials, one-dimensional (1D) networks have appeared as the best candidates for strong circular dichroism (CD) and circularly polarized luminescence (CPL). Here, we present a new family of 1D chiral lead-bromide materials prepared from organic S/R/rac-1-hydroxypropyl-2-ammonium (S/R/rac-HP2A) cations. The presence or absence of polarity in the crystal structure as well as the perovskite or nonperovskite nature of the inorganic network depends on the initial stoichiometry of metal-halide salt and chiral amine during the crystallization. The perovskite-type networks exhibit strong CD and second harmonic generation (SHG) responses, while the nonperovskite compounds show the presence of polymorphism in the crystal phase and weak natural optical activity in the final material. These results underline the impact of synthetic conditions and thin film morphology on the structural and optical properties of metal-halide hybrid networks.

Structural, electronic, optical, elastic, thermodynamic and thermal transport properties of Cs2AgInCl6 and Cs2AgSbCl6 double perovskite semiconductors using a first-principles study

In this study, we employ the framework of first-principles density functional theory (DFT) computations to investigate the physical, electrical, bandgap and thermal conductivity of Cs2AgInCl6-CAIC (type I) and Cs2AgSbCl6-CASC (type II) using the GGA-PBE method. CAIC possesses a direct band gap energy of 1.812 eV, while CASC demonstrates an indirect band gap energy of 0.926 eV. The CAIC and CASC exhibit intriguingly reduced thermal conductivity, which can be attributed to the notable reduction in their respective Debye temperatures, measuring 182 K and 135 K, respectively. The Raman active modes computed under ambient conditions have been compared with real-world data, showing excellent agreement. The thermal conductivity values of CAIC and CASC compounds exhibit quantum mechanical characteristics, with values of 0.075 and 0.25 W m-1 K-1, respectively, at 300 K. It is foreseen that these outcomes will generate investigations concerning phosphors and diodes that rely on single emitters, with the aim of advancing lighting and display technologies in the forthcoming generations.

Alternating chiral and achiral spacers for constructing two-dimensional chiral hybrid perovskites toward circular-polarization-sensitive photodetection

The intrinsic integration of structural flexibility, chiroptical activity, and photoelectric properties endows the two-dimensional (2D) chiral hybrid perovskites (CHPs) with significant application potential in chiroptoelectronics and spintronics. However, the scarcity of suitable chiral organic ligands severely hinders their extensive construction, necessitating the development of new strategies for designing 2D CHPs. Herein, by exploiting a half substitution method, we created a pair of 2D CHPs with alternating cations in the interlayer space (ACI), (R/S-PPA)(PA)PbBr4 (2R/2S, PPA = 1-phenylpropylamine, PA = n-pentylamine), from the achiral Ruddlesden-Popper (RP) (PA)2PbBr4 (1). The successful chirality transfer induces 2R/2S to crystallize in the chiral P212121 space group and thus acquire appealing chiroptical activity. Consequently, the single-crystal devices of 2R exhibit good distinguishability to the left- and right-handed circularly polarized 405 nm lights with a photocurrent dissymmetric factor of 0.10 at 10 V bias. This work demonstrates an intriguing achiral RP to chiral ACI motif reconstruction in 2D halide hybrid perovskites, opening a door for expanding the family of 2D CHPs.

Chemistry in the Molten State: Opportunities for Designing and Tuning the Emission Properties of Halide Perovskites

A series of monolayered lead halide hybrid perovskites (HO2C(CH2)n-1NH3)2PbX4, named (Cn)2PbX4 (n = 4-6, X = Cl, Br), exhibiting a low congruent melting temperature (Tm) (Tm = 130 °C for (C4)2PbBr4), high stability in the molten state, and whitish type emission, are reported. From the synthesis in the molten state, rare solid solutions of mixed organic cations (Cn1-xCn'x)2PbX4 (n, n' = 4-6; X = Cl, Br; 0 ≤ x ≤1) as well as solid solutions of mixed halides (Cn)2Pb(X1-yX'y)4 (n = 4-6; X, X' = Cl, Br; 0 ≤ y ≤1) have been prepared and characterized (thermal behavior, powder X-ray diffraction (PXRD), photoluminescence properties). The impact of substitutions is significant on the thermal properties, lowering the Tm down to 100 °C for (C4)2Pb(Br0.25Cl0.75)4. The emission properties are slightly tuned in the case of mixed organic cation systems, whereas modifications are more dramatic in the case of mixed halide systems, leading to emission properties through the entire visible region. These results illustrate the great opportunities offered by the congruent melting properties of halide perovskites allowing syntheses in the molten state.

Realizing the Lowest Bandgap and Exciton Binding Energy in a Two-Dimensional Lead Halide System

Finding stable analogues of three-dimensional (3D) lead halide perovskites has motivated the exploration of an ever-expanding repertoire of two-dimensional (2D) counterparts. However, the bandgap and exciton binding energy in these 2D systems are generally considerably higher than those in 3D analogues due to size and dielectric confinement. Such quantum confinements are most prominently manifested in the extreme 2D realization in (A)_mPbI₄ (m = 1 or 2) series of compounds with a single inorganic layer repeat unit. Here, we explore a new A-site cation, 4,4'-azopyridine (APD), whose size and hydrogen bonding properties endow the corresponding (APD)PbI₄ 2D compound with the lowest bandgap and exciton binding energy of all such compounds, 2.19 eV and 48 meV, respectively. (APD)PbI₄ presents the first example of the ideal Pb-I-Pb bond angle of 180°, maximizing the valence and conduction bandwidths and minimizing the electron and hole effective masses. These effects coupled with a significant increase in the dielectric constant provide an explanation for the unique bandgap and exciton binding energies in this system. Our theoretical results further reveal that the requirement of optimizing the hydrogen bonding interactions between the organic and the inorganic units provides the driving force for achieving the structural uniqueness and the associated optoelectronic properties in this system. Our preliminary investigations in characterizing photovoltaic solar cells in the presence of APD show encouraging improvements in performances and stability.

Recent progress in layered metal halide perovskites for solar cells, photodetectors, and field-effect transistors

Metal halide perovskite materials demonstrate immense potential for photovoltaic and electronic applications. In particular, two-dimensional (2D) layered metal halide perovskites have advantages over their 3D counterparts in optoelectronic applications due to their outstanding stability, structural flexibility with a tunable bandgap, and electronic confinement effect. This review article first analyzes the crystallography of different 2D perovskite phases [the Ruddlesden-Popper (RP) phase, the Dion-Jacobson (DJ) phase, and the alternating cations in the interlayer space (ACI) phase] at the molecular level and compares their common electronic properties, such as out-of-plane conductivity, crucial to vertical devices. This paper then critically reviews the recent development of optoelectronic devices, namely solar cells, photodetectors and field effect transistors, based on layered 2D perovskite materials and points out their limitations and potential compared to their 3D counterparts. It also identifies the important application-specific future research directions for different optoelectronic devices providing a comprehensive view guiding new research directions in this field.

Picoperovskites: The Smallest Conceivable Isolated Halide Perovskite Structures Formed within Carbon Nanotubes

Halide perovskite structures are revolutionizing the design of optoelectronic materials, including solar cells, light-emitting diodes, and photovoltaics when formed at the quantum scale. Four isolated sub-nanometer, or picoscale, halide perovskite structures formed inside ≈1.2-1.6 nm single-walled carbon nanotubes (SWCNTs) by melt insertion from CsPbBr₃ and lead-free CsSnI₃ are reported. Three directly relate to the ABX₃ perovskite archetype while a fourth is a perovskite-like lamellar structure with alternating Cs₄ and polyhedral Sn₄ I_x layers. In ≈1.4 nm-diameter SWCNTs, CsPbBr₃ forms Cs₃ Pb^II Br₅ nanowires, one ABX₃ unit cell in cross section with the Pb²⁺ oxidation state maintained by ordered Cs⁺ vacancies. Within ≈1.2 nm-diameter SWCNTs, CsPbBr₃ and CsSnI₃ form inorganic-polymer-like bilayer structures, one-fourth of an ABX₃ unit cell in cross section with systematically reproduced ABX₃ stoichiometry. Producing these smallest halide perovskite structures at their absolute synthetic cross-sectional limit enables quantum confinement effects with first-principles calculations demonstrating bandgap widening compared to corresponding bulk structural forms.

Enantiomorphic Single Crystals of Linear Lead(II) Bromide Perovskitoids with White Circularly Polarized Emission

Chiroptical hybrid organic-inorganic perovskites are emerging as a new class of promising materials with mirror optical signal responses for optoelectronic applications. However, chiroptical white-emission materials have been scarcely unearthed. Herein, four pairs of hybrid lead(II) bromide perovskitoids were obtained, namely, (R)- and (S)-(H₂ MPz)PbBr₄ (R/S-MPz=(R)-(-)/(S)-(+)-2-methylpiperazine) (1 and 2), (R)- and (S)-(H₂ MPz)₃ Pb₂ Br₁₀ ⋅2 DMAc (3 and 4), (R)- and (S)-(H₂ MPz)PbBr₄ ⋅0.5 MeCN (5 and 6) and (R)- and (S)-(H₂ MPz)₂ Pb₂ Br₈ ⋅DCM (7 and 8). Notably, they all exhibit ultrabroadband emission and chiroptical signals. Perovskitoids 3-6 even achieve white circularly polarized emission with a high dissymmetric factor (g_lum ) (±3×10^-3 for 3 and 4; ±8×10^-3 for 5 and 6). This new type of hybrid perovskitoids will attract attention and find applications in chiroptical fields because of the extensively and easily tunable photophysical properties.

Tin Halide Perovskites: From Fundamental Properties to Solar Cells

Metal halide perovskites have unique optical and electrical properties, which make them an excellent class of materials for a broad spectrum of optoelectronic applications. However, it is with photovoltaic devices that this class of materials has reached the apotheosis of popularity. High power conversion efficiencies are achieved with lead-based compounds, which are toxic to the environment. Tin-based perovskites are the most promising alternative because of their bandgap close to the optimal value for photovoltaic applications, the strong optical absorption, and good charge carrier mobilities. Nevertheless, the low defect tolerance, the fast crystallization, and the oxidative instability of tin halide perovskites currently limit their efficiency. The aim of this review is to give a detailed overview of the crystallographic, photophysical, and optoelectronic properties of tin-based perovskite compounds in their multiple forms from 3D to low-dimensional structures. At the end, recent progress in tin-based perovskite solar cells are reviewed, mainly focusing on the detail of the strategies adopted to improve the device performances. For each subtopic, the current challenges and the outlook are discussed, with the aim to stimulate the community to address the most important issues in a concerted manner.

Ferroelectricity and Piezoelectric Energy Harvesting of Hybrid A2BX4-Type Halogenocuprates Stabilized by Phosphonium Cations

Perovskite-structured compounds containing organic cations and inorganic anions have gained prominence as materials for next-generation electronic and energy devices. Hybrid materials possessing ferro- and piezoelectric properties are in recent focus for mechanical energy harvesting (nanogenerator) applications. Here, we report the ferroelectric behavior of A₂BX₄-type halogenocuprate materials supported by heteroleptic phosphonium cations. These lead-free discrete Cu(II) halides [Ph₃MeP]₂[CuCl₄] (1) and [Ph₃MeP]₂[CuBr₄] (2) exhibit a remnant polarization (P _r) of 17.16 and 26.02 μC cm^-2, respectively, at room temperature. Furthermore, flexible polymer films were prepared with various weight percentage (wt %) compositions of 1 in thermoplastic polyurethane (TPU) and studied for mechanical energy harvesting applications. A highest peak-to-peak voltage output of 25 V and power density of 14.1 μW cm^-2 were obtained for the optimal 15 wt % 1-TPU composite film. The obtained output voltages were utilized for charging a 100 μF electrolytic capacitor that reaches its maximum charging point within 30 s with sizable stored energies and accumulated charges.

Strong Second- and Third-Harmonic Generation in 1D Chiral Hybrid Bismuth Halides

Breaking the symmetry of a crystal structure can enable even-order nonlinear activities, including second-harmonic generation (SHG). The emerging chiral hybrid organic-inorganic metal halides feature unique optical and electronic properties and flexible crystal structures, making them a class of promising nonlinear optical materials. However, their nonlinear response performances are currently inferior to traditional nonlinear crystals, because of the lack of research on resonant enhancement and third-harmonic generation (THG). Herein, we designed chiral hybrid bismuth halides with naturally nonsymmetrical structure to enable SHG. Simultaneously, these chiral compounds preserve 1D crystal structures to create strong free exciton, broad self-trapped exciton (STE), and discrete band energy levels, which facilitate the resonant enhancement of SHG and THG susceptibilities. These new chiral films showcase superior effective SHG susceptibility (χ⁽²⁾ ∼ 130.5 pm V^-1 at an interesting wavelength of 1550 nm), exceeding that of the reference, a commercial LiNbO₃ (χ⁽²⁾ ∼ 83.4 pm V^-1) single-crystal film. Furthermore, their THG intensities are even higher than their SHG intensities, with effective THG susceptibility (χ⁽³⁾) being ∼9.0 × 10⁶ pm² V^-2 at 1550 nm (37 times that of the reference monolayer WS₂). Their high SHG and THG performances indicate the promising future of these 1D chiral hybrid bismuth halides toward nonlinear optical applications.

Synthesis, characterization and optoelectronic properties of 2D hybrid RPbX4 semiconductors based on an isomer mixture of hexanediamine-based dications

Three new hybrid two-dimensional (2D) organic–inorganic semiconductors are presented, which contain lead halides and a mixture of hexanediamine-based isomers in the stoichiometry [2,2,4(2,4,4)-trimethyl-1,6-hexanediamine]PbX4 (X = I, Br, Cl). These hexanediamine derivatives, with attached methyl groups at the carbon backbone of both isomers, determine the packing of the organic layers between the inorganic 2D sheets, while the optical absorption and photoluminescence spectra reveal excitonic peaks at T = 77 K and room temperature. The as-synthesized semiconductors were stored for three years in the dark and under low humidity and were examined again and the results were compared to those of the fresh materials. The chloride analogue, after the three year storage, displays white-like luminescence. The use of non-equivalent isomer and racemic mixtures in the organic component to form hybrid organic–inorganic semiconductors is an efficient method to alter the properties of 2D perovskites by tuning the isomers’ chemical functionalities. Finally, a comparison of the observed excitonic absorption and photoluminescence signals to that of analogous 2D compounds is discussed.

Structural chemistry of layered lead halide perovskites containing single octahedral layers

We present a comprehensive review of the structural chemistry of hybrid lead halides of stoichiometry APbX 4, A 2PbX4 or A A'PbX 4, where A and A' are organic ammonium cations and X = Cl, Br or I. These compounds may be considered as layered perovskites, containing isolated, infinite layers of corner-sharing PbX 4 octahedra separated by the organic species. First, over 250 crystal structures were extracted from the CCDC and classified in terms of unit-cell metrics and crystal symmetry. Symmetry mode analysis was then used to identify the nature of key structural distortions of the [PbX 4]∞ layers. Two generic types of distortion are prevalent in this family: tilting of the octahedral units and shifts of the inorganic layers relative to each other. Although the octahedral tilting modes are well known in the crystallography of purely inorganic perovskites, the additional layer-shift modes are shown to enormously enrich the structural options available in layered hybrid perovskites. Some examples and trends are discussed in more detail in order to show how the nature of the interlayer organic species can influence the overall structural architecture; although the main aim of the paper is to encourage workers in the field to make use of the systematic crystallographic methods used here to further understand and rationalize their own compounds, and perhaps to be able to design-in particular structural features in future work.

Ion-exchange-induced MAPbI3 thin-film 3D–2D and 3D–1D conversions: unveiling structural transformations in films via synergistic and competitive approaches

Interesting gas-induced structural transformations from 3D MAPbI₃ to LD perovskites are investigated, contributing to explore more optoelectronic materials with tunability.

Modulation Effect Generated by A Cations in Hybrid A2BB'X6 Double Halogen Perovskite Materials

Double perovskite A₂BB'X₆, including all-inorganic and hybrid organic-inorganic composition, show great potential applications. The role of A cations (organic molecules or inorganic ions) in the double perovskite is distinct from that in the standard perovskite. Therefore, we carried out systematic analyses of the geometric and electronic structures of Cs₂AgBiBr₆ and (MA)₂AgBiBr₆ (MA = CH₃NH₃) double perovskites. Cs₂AgBiBr₆ maintains the standard cubic double perovskite lattice. While MA molecules prefer to align in the [110] direction in (MA)₂AgBiBr₆ and give rise to obvious lattice distortion. The band gap of (MA)₂AgBiBr₆ is slightly less than that of Cs₂AgBiBr₆. Because of the spherical or quasi-spherical wave functions of the s/d orbitals, the lattice distortion and the transverse shift between Ag/Bi and Br induced by MA molecules do not change the composition of the band edges. But the complex bonding interactions between MA and the inorganic frameworks make the Ag-Br or Bi-Br bond lengths no longer identical values, so the bond strength and the energy level of each bonding state are dispersed and the band is expanded, which reduces the band gap of the hybrid organic-inorganic double perovskite (MA)₂AgBiBr₆. Making the role of A cations in the A₂BB'X₆ double perovskite clear, we could find an excellent double perovskite to put forward their applications.

Recent Progress in Engineering Metal Halide Perovskites for Efficient Visible-Light-Driven Photocatalysis

Artificial photosynthesis has attracted increasing attention due to recent environmental and energy concerns. Metal halide perovskites (MHPs) demonstrating excellent optoelectronic properties have currently emerged as novel and efficient photocatalytic materials. Herein, the structural features of MHPs that are responsible for the photoinduced charge separation and charge migration properties are briefly introduced, and then important and necessary photophysical and photochemical aspects of MHPs related to photoredox catalysis are summarized. Subsequently, the applications of MHPs for solar energy harvesting and photocatalytic conversion, including H₂ evolution, CO₂ reduction, degradation of organic pollutants, and photoredox organic synthesis, are extensively demonstrated, with a focus on strategies for improving the performance (e.g., selectivity, activity, stability, recyclability, and environmental compatibility) of these MHP-based photocatalytic systems. To conclude, existing challenges and prospects on the future development of MHP-based materials towards photoredox catalysis applications are detailed.

Structural Diversity in Layered Hybrid Perovskites, A2PbBr4 or AA'PbBr4, Templated by Small Disc-Shaped Amines

We present three new hybrid layered lead(II) bromide perovskites of generic composition A₂PbBr₄ or AA'PbBr₄ that exhibit three distinct structure types. [TzH]₂PbBr₄ ([TzH⁺] = 1,2,4-triazolium) adopts a (001)-oriented layer structure and [AaH]₂PbBr₄, ([AaH⁺] = acetamidinium) adopts a (110)-oriented type, whereas [ImH][TzH]PbBr₄, ([ImH⁺] = imidazolium) adopts a rare (110)-oriented structure with enhanced corrugation (i.e., 3 × 3 type). The crystal structures of each are discussed in terms of the differing nature of the templating molecular species. Photoluminescent spectra for each are reported and the behaviors discussed in relation to the different structure of each composition.

Rigid Amine-Induced Pseudo-3 D Lead-Free Bismuth Halide Perovskite with an Improved Band Edge for Visible-Light Absorption

Bismuth organometal halide perovskites have recently been investigated as potential substitutes for lead perovskite solar-cell absorbers because of their lower toxicity. However, the narrowing of the band gap remains a crucial challenge for their practical application. All known Bi-based perovskites have large band gaps, thereby affording weak visible-light absorption. This study concerns a novel, lead-free, pseudo-3 D perovskite optoelectronic material, (MV)BiI₅ (MV²⁺ =methyl viologen). The pseudo-3 D metal-halogen perovskite-like structure is constructed by connecting [BiI₅ ] ²⁺ units via I⋅⋅⋅I contacts. MV, as a rigid organic amine, is located at the center of each parallelepiped to balance the charge and stabilize the structure. (MV)BiI₅ has a narrow band gap of 1.48 eV and a better photoresponse than (MV)BiCl₅ with a 1 D structure. (MV)BiI₅ is the first Bi-based perovskite compound with a band gap energy comparable with (CH₃ NH₃ )PbI₃ , which is encouraging for optoelectronic applications. This research will open a potential pathway for the design of pseudo-3 D Bi-based perovskites with performances comparable with APbX₃ absorbers.

Structural variations in (001)-oriented layered lead halide perovskites, templated by 1,2,4-triazolium

A new hybrid lead(ii) halide perovskite, (TzH)2PbCl4, ([TzH+] = 1,2,4-triazolium), adopts a (001)-oriented layered perovskite structure, which can be considered as derived from the n = 1 Ruddlesden-Popper (RP) type. Variable temperature single crystal X-ray diffraction reveals a structural phase transition in the region 125 K < T < 173 K between a high temperature, high symmetry polymorph, space group Cmcm, and a low temperature, low symmetry chiral polymorph, space group P212121, which has a tripled unit cell volume. UV-Vis spectra suggest a band gap of 3.30 eV for (TzH)2PbCl4. A second polymorph of the bromide analogue, (TzH)2PbBr4-II, is also reported, and structural relationships between all three variants are discussed.