Bifunctional electrolyte additive MgI2 for improving cycle life in high-efficiency redox-mediated Li-O2 batteries

Here, MgI2 is introduced as a bifunctional self-defense redox mediator into dimethyl sulfoxide-based Li-O2 batteries. During charging, I- is first oxidized to I3-, which facilitates the decomposition of Li2O2, and thus reduces overpotential. In addition, Mg2+ spontaneously reacts with the Li anode to form a very stable SEI layer containing MgO, which can resist the synchronous attack by the soluble I3- and improve the interface stability between the Li anode and the electrolyte. Therefore, a Li-O2 battery containing MgI2 exhibits an extended cycling life span (400 cycles) and a quite low overpotential (0.6 V).

Tailoring the p-Band Center of NS Pair for Accelerating High-Performance Lithium-Oxygen Battery

The local coordination environment of catalytical moieties directly determines the performance of electrochemical energy storage and conversion devices, such as Li-O₂ batteries (LOBs) cathode. However, understanding how the coordinative structure affects the performance, especially for non-metal system, is still insufficient. Herein, a strategy that introduces S-anion to tailor the electronic structure of nitrogen-carbon catalyst (SNC) is proposed to improve the LOBs performance. This study unveils that the introduced S-anion effectively manipulates the p-band center of pyridinic-N moiety, substantially reducing the battery overpotential by accelerating the generation and decomposition of intermediate products Li_1-3 O₄ . The lower adsorption energy of discharging product Li₂ O₂ on NS pair accounts for the long-term cyclic stability by exposing the high active area under operation condition. This work demonstrates an encouraging strategy to enhance LOBs performance by modulating the p-band center on non-metal active sites.

Solvent dependent iodide oxidation in metal-halide perovskite precursor solutions

Solar cell absorbing layers made of metal-halide perovskites (MHPs) are usually deposited from solution phase precursors, which is one of the reasons why these materials received huge research attention in the last few years. A detailed knowledge of the solution chemistry is critical to understand the formation of MHP thin films and thus to control their optoelectronic properties and the reproducibility issues that usually affect their synthesis. In this regard, the concentration of triiodide, I₃^-, is one factor known to have an influence on regulating important aspects such as the particle size in the solution and the defect concentration in the film. In this study, we highlight an underestimated source of I₃^-, namely the iodide salt solutions ubiquitously employed in MHP synthetic routes, which not only lead to the formation of I₃^- but also detracts available I^- for the MHP synthesis, thus establishing under-stoichiometric conditions. Particularly, we show how the oxidation of I^- to I₃^- changes in time with both the iodide salt counter-cation (K⁺, CH₃NH₃⁺) and the used solvent, meaning that variable quantities of I₃^- are found depending on the synthesis conditions, with enhanced oxidation found in the γ-butyrolactone (GBL) solvent. Though these differences are generally small, we shed light on a hidden and ever-present reaction which is likely to be related to the overall processing quality of MHP thin films.

Single-Atomic Zn/Co-Nx Sites Boost Solid-Soluble Synergistic Catalysis for Lithium-Oxygen Batteries

Lithium-oxygen batteries have attracted widespread attention owing to their superior theoretical energy density. However, they are obstructed by sluggish oxygen reduction (ORR) and evolution reaction (OER) kinetics at air cathodes. Herein, different from using single solid or soluble catalysts, solid-soluble synergistic catalysis is proposed to conjointly enhance ORR/OER performances. During discharge, single-atomic zinc/cobalt embedded in nitrogen-doped carbon (Zn, Co-N/C) is judiciously engineered as a solid catalyst to regulate the growth pathway of Li₂O₂ and promote ORR kinetics. During charge, a typical redox mediator (RM, LiI) is added as a soluble catalyst to permit efficient oxidation of Li₂O₂. Of note is that the atomic Zn/Co-N_x sites can chemically adsorb oxidized iodine (I₂) and accelerate OER kinetics, which plays a decisive role in eliminating the shuttle effect of I₃^-/I₂ to the Li anode. Coupling a single-atomic catalyst with restricted oxidized iodine offers an exceptional discharge capacity, remarkably low polarization, and superior long-term cycling stability.

Stabilizing Li Anodes in I2 Steam to Tackle the Shuttling-Induced Depletion of an Iodide/Triiodide Redox Mediator in Li-O2 Batteries with Suppressed Li Dendrite Growth

Redox mediators (RMs) have become a significant point in the now-established Li-O₂ battery system to reduce the charging overpotential in the oxygen evolution process. Nevertheless, a major inherent barrier of the RM is the redox shuttling between the Li metal anode and mobile RM, resulting in the corrosion of Li and depletion of RM. In this study, taking iodide/triiodide as a model RM, we propose an effective strategy by immersing the Li metal anode in I₂ steam to create a 1.5 μm thick surface protective layer. The resultant ionic conductive LiI layer on the Li metal anode can not only suppress Li dendrite growth but also act as a buffer layer between the RM and bare Li. By combining the iodide/triiodide RM with the LiI protective layer, the Li-O₂ battery shows low and steady charge voltage plateaus of ∼3.6 V over 70 cycles. Importantly, the symmetrical cell using the LiI-protected Li electrode exhibited small Li plating/stripping overpotentials (∼20 mV, 480 h), far superior to that of the bare Li electrode (∼70 mV, 300 h). The in situ interfacial observation shows that dendrite growth on the Li metal can be effectively suppressed by optimizing the LiI protective layer.