A Hydrogen-Bonded Organic Framework (HOF) with Type IV NH3 Adsorption Behavior

Reversible Adsorption of Ammonia in the Crystalline Solid of a CO2H-Functionalized Cyclic Oligophenylene

Ammonia (NH3) is a viable candidate for the storage and distribution of hydrogen (H2) due to its exceptional volumetric and gravimetric hydrogen energy density. Therefore, it is desirable to develop NH3 storage materials that exhibit robust stability across numerous adsorption-desorption cycles. While porous materials with polymeric frameworks are often used for NH3 capture, achieving reversible NH3 uptake remains a formidable challenge, primarily due to the high reactivity of NH3. Here, we advocate the use of CO2H-functionalized cyclic oligophenylene 1a with high chemical stability as a novel single-molecule-based adsorbent for NH3. Simple reprecipitation of 1a selectively yielded microporous crystalline solid 1a (N). Crystalline 1a (N) adsorbs up to 8.27 mmol/g of NH3 at 100 kPa and 293 K. Adsorbed NH3 in the pore of 1a (N) has a packing density of 0.533 g/cm3 at 293 K, which is close to the density of liquid NH3 (0.681 g/cm3 at 240 K). Crystalline 1a (N) also exhibits reversible NH3 adsorption over at least nine cycles, sustaining its storage capacity (1st cycle: 8.27 mmol/g; 9th cycle: 8.25 mmol/g at 100 kPa and 293 K) and crystallinity. During each desorption cycle, NH3 was removed from 1a (N) under reduced pressure (∼65 Pa), leaving <3% of the total uptake, and 1a (N) was fully purged under dynamic vacuum conditions (∼5 × 10-4 Pa at 293 K for 1 h) before the subsequent adsorption cycles. Thus, microporous crystalline 1a (N) can reliably adsorb and desorb NH3 repeatedly, which avoids the need for heat-based activation between cycles.

Crystalline Porous Organic Frameworks Based on Multiple Dynamic Linkages

A novel class of crystalline porous materials has been developed utilizing multilevel dynamic linkages, including covalent B-O, dative B←N and hydrogen bonds. Typically, boronic acids undergo in situ condensation to afford B3O3-based units, which further extend to molecular complexes or chains via B←N bonds. The obtained superstructures are subsequently interconnected via hydrogen bonds and π-π interactions, producing crystalline porous organic frameworks (CPOFs). The CPOFs display excellent solution processability, allowing dissolution and subsequent crystallization to their original structures, independent of recrystallization conditions, possibly due to the diverse bond energies of the involved interactions. Significantly, the CPOFs can be synthesized on a gram-scale using cost-effective monomers. In addition, the numerous acidic sites endow the CPOFs with high NH3 capacity, surpassing most porous organic materials and commercial materials.

Advanced Materials for NH3 Capture: Interaction Sites and Transport Pathways

Ammonia (NH3) is a carbon-free, hydrogen-rich chemical related to global food safety, clean energy, and environmental protection. As an essential technology for meeting the requirements raised by such issues, NH3 capture has been intensively explored by researchers in both fundamental and applied fields. The four typical methods used are (1) solvent absorption by ionic liquids and their derivatives, (2) adsorption by porous solids, (3) ab-adsorption by porous liquids, and (4) membrane separation. Rooted in the development of advanced materials for NH3 capture, we conducted a coherent review of the design of different materials, mainly in the past 5 years, their interactions with NH3 molecules and construction of transport pathways, as well as the structure-property relationship, with specific examples discussed. Finally, the challenges in current research and future worthwhile directions for NH3 capture materials are proposed.

Structural Design and Energy and Environmental Applications of Hydrogen-Bonded Organic Frameworks: A Systematic Review

Hydrogen-bonded organic frameworks (HOFs) are emerging porous materials that show high structural flexibility, mild synthetic conditions, good solution processability, easy healing and regeneration, and good recyclability. Although these properties give them many potential multifunctional applications, their frameworks are unstable due to the presence of only weak and reversible hydrogen bonds. In this work, the development history and synthesis methods of HOFs are reviewed, and categorize their structural design concepts and strategies to improve their stability. More importantly, due to the significant potential of the latest HOF-related research for addressing energy and environmental issues, this work discusses the latest advances in the methods of energy storage and conversion, energy substance generation and isolation, environmental detection and isolation, degradation and transformation, and biological applications. Furthermore, a discussion of the coupling orientation of HOF in the cross-cutting fields of energy and environment is presented for the first time. Finally, current challenges, opportunities, and strategies for the development of HOFs to advance their energy and environmental applications are discussed.

Charge-Assisted Ionic Hydrogen-Bonded Organic Frameworks: Designable and Stabilized Multifunctional Materials

Hydrogen-bonded organic frameworks (HOFs) are a class of crystalline framework materials assembled by hydrogen bonds. HOFs have the advantages of high crystallinity, mild reaction conditions, good solution processability, and reproducibility. Coupled with the reversibility and flexibility of hydrogen bonds, HOFs can be assembled into a wide diversity of crystalline structures. Since the bonding energy of hydrogen bonds is lower than that of ligand and covalent bonds, the framework of HOFs is prone to collapse after desolventisation and the stability is not high, which limits the development and application of HOFs. In recent years, numerous stable and functional HOFs have been developed by π-π stacking, highly interpenetrated networks, charge-assisted, ligand-bond-assisted, molecular weaving, and covalent cross-linking. Charge-assisted ionic HOFs introduce electrostatic attraction into HOFs to improve stability while enriching structural diversity and functionality. In this paper, we review the development, the principles of rational design and assembly of charge-assisted ionic HOFs, and introduces the different building block construction modes of charge-assisted ionic HOFs. Highlight the applications of charge-assisted ionic HOFs in gas adsorption and separation, proton conduction, biological applications, etc., and prospects for the diverse design of charge-assisted ionic HOFs structures and multifunctional applications.

Green solvent systems for material syntheses and chemical reactions

It is of great significance to develop environmentally benign, non-volatile and recyclable green solvents for different applications. This feature article overviews the properties of green solvent systems (e.g., ionic liquids, supercritical carbon dioxide, deep eutectic solvents and mixed green solvent systems) and their applications in (1) framework material syntheses, including metal-organic frameworks, covalent organic frameworks and hydrogen-bonded organic frameworks, and (2) CO2 conversion reactions, including photocatalytic and electrocatalytic reduction reactions. Finally, the future perspective for research on green solvent systems is proposed from different aspects.

Crystalline porous organic salts

Crystalline porous organic salts (CPOSs), formed by the self-assembly of organic acids and organic bases through ionic bonding, possess definite structures and permanent porosity and have rapidly emerged as an important class of porous organic materials in recent years. By rationally designing and controlling tectons, acidity/basicity (pKa), and topology, stable CPOSs with permanent porosity can be efficiently constructed. The characteristics of ionic bonds, charge-separated highly polar nano-confined channels, and permanent porosity endow CPOSs with unique physicochemical properties, offering extensive research opportunities for exploring their functionalities and application scenarios. In this review, we systematically summarize the latest progress in CPOS research, describe the synthetic strategies for synthesizing CPOSs, delineate their structural characteristics, and highlight the differences between CPOSs and hydrogen-bonded organic frameworks (HOFs). Furthermore, we provide an overview of the potential applications of CPOSs in areas such as negative linear compression (NLC), proton conduction, rapid transport of CO2, selective and rapid transport of K+ ions, atmospheric water harvesting (AWH), gas sorption, molecular rotors, fluorescence modulation, room-temperature phosphorescence (RTP) and catalysis. Finally, the challenges and future perspectives of CPOSs are presented.

Self-Healing Hydrogen-Bonded Organic Frameworks for Low-Concentration Ammonia Capture

The self-healing behavior has been extensively used in intelligent sensing systems capable of molecular recognition. However, most rigid crystalline frameworks, once collapsed under external stimuli like pressure, heat, or vacuum, could hardly recover to their crystalline phases under ambient conditions. Here, we report the self-healing of a new microporous hydrogen-bonded organic framework, FDU-HOF-3 (FDU = Fudan University), for ammonia (NH3) capture and compared it with the established mesoporous HOF-101. With the introduction of low-concentration NH3 into the pores, the HOFs became disordered but were then simply heated under a vacuum to return to their original crystalline states after NH3 removal. Close characterizations revealed that the repeatable self-healing behavior of these HOFs was achieved due to the COOH-NH3 acid-base interactions accompanied by the breaking and regeneration of complementary COOH-COOH hydrogen bonds. FDU-HOF-3 showed a record-capturing capability for low-concentration NH3 (8.13 mmol/g at 25 mbar) among all HOFs and displayed a quick photocurrent decrease after exposure to 250 ppm NH3 for less than 10 s. These self-healing HOFs were used to capture and release NH3 for over 10 cycles without any decrease in the adsorption capacities.

Hydrogen-Bonding Assembly Meets Anion Coordination Chemistry: Framework Shaping and Polarity Tuning for Xenon/Krypton Separation

Hybrid hydrogen-bonded (H-bonded) frameworks built from charged components or metallotectons offer diverse guest-framework interactions for target-specific separations. We present here a study to systematically explore the coordination chemistry of monovalent halide anions, i.e., F- , Cl- , Br- , and I- , with the aim to develop hybrid H-bond synthons that enable the controllable construction of microporous H-bonded frameworks exhibiting fine-tunable surface polarity within the adaptive cavities for realistic xenon/krypton (Xe/Kr) separation. The spherical halide anions, especially Cl- , Br- , and I- , are found to readily participate in the charge-assisted H-bonding assembly with well-defined coordination behaviors, resulting in robust frameworks bearing open halide anions within the distinctive 1D pore channels. The activated frameworks show preferential binding towards Xe (IAST Xe/Kr selectivity ca. 10.5) because of the enhanced polarizability and the pore confinement effect. Specifically, dynamic column Xe/Kr separation with a record-high separation factor (SF=7.0) among H-bonded frameworks was achieved, facilitating an efficient Xe/Kr separation in dilute, CO2 -containing gas streams exactly mimicking the off-gas of spent nuclear fuel (SNF) reprocessing.

Dispersing LiCl in Zwitterionic COF for Highly Efficient Ammonia Storage and Separation

Efficient and inherently safe NH3 storage and separation are of significant importance for the chemical industry. Herein, we proposed zwitterionic COF as a porous host to disperse LiCl for highly efficient NH3 storage and separation with record adsorption capacity. The equivalently cationic and anionic groups in the channels of zwitterionic COF could act as two separated sites to facilitate the dispersion of LiCl, hence the optimal composite exhibits a high capture capacity of 44.98 mmol/g at 25 °C and 1 bar, far exceeding other existing porous materials. Notably, the adsorption capacity is completely reversible and the efficient separation of NH3 from NH3 /CO2 /N2 mixture is achieved through breakthrough experiments. DFT calculation combined with XPS and 7 Li NMR experimental results give insight into the interaction between zwitterionic COF and LiCl. This work extends possibilities for the development of efficient adsorbents for NH3 storage and separation.

Controlling the Crystallisation and Hydration State of Crystalline Porous Organic Salts

Crystalline porous organic salts (CPOS) are a subclass of molecular crystals. The low solubility of CPOS and their building blocks limits the choice of crystallisation solvents to water or polar alcohols, hindering the isolation, scale-up, and scope of the porous material. In this work, high throughput screening was used to expand the solvent scope, resulting in the identification of a new porous salt, CPOS-7, formed from tetrakis(4-sulfophenyl)methane (TSPM) and tetrakis(4-aminophenyl)methane (TAPM). CPOS-7 does not form with standard solvents for CPOS, rather a hydrated phase (Hydrate2920) previously reported is isolated. Initial attempts to translate the crystallisation to batch led to challenges with loss of crystallinity and Hydrate2920 forming favorably in the presence of excess water. Using acetic acid as a dehydrating agent hindered formation of Hydrate2920 and furthermore allowed for direct conversion to CPOS-7. To allow for direct formation of CPOS-7 in high crystallinity flow chemistry was used for the first time to circumvent the issues found in batch. CPOS-7 and Hydrate2920 were shown to have promise for water and CO2 capture, with CPOS-7 having a CO2 uptake of 4.3 mmol/g at 195 K, making it one of the most porous CPOS reported to date.

Charge Transfer Process of a Solvated Hydrogen-Bonded Organic Network

We show the first example of an organic linker (OL) terminated by carboxylic groups that can form a hydrogen-bonded network/polymer (HBN) in solution under controlled conditions in which the photogenerated charges can hop from a monomer OL to the hydrogen-bonded backbone of OLs, as probed by transient absorption (fs-TA). While fs-TA reveals a slow twisting process in the monomer form of the OL, the formation of a hydrogen-bonded network in solution suppresses such process and favors instead a charge transfer (CT) state along the low-lying hydrogen-bonded backbone. Theoretical calculations show that such solvated HBN in a specific polar solvent is stabilized due to the huge change of the dipole moment from monomer compared to the network, leading to a charge delocalization character due to the symmetry breaking. Our findings will open new avenues for implementing solvated hydrogen-bonded molecules in applications such as sensing and photocatalysis.

Porous acid-base hybrid polymers for enhanced NH3 uptake with assistance from cooperative hydrogen bonds

Carboxylic acid-modified materials are a common means of achieving efficient NH3 adsorption. In this study, we report that improved NH3 adsorption capacity and easier desorption can be achieved through the introduction of substances containing Lewis basic groups into carboxylic acid-modified materials. Easily synthesized mesoporous acid-base hybrid polymers were constructed with polymers rich in carboxylic acid and Lewis base moieties through cooperative hydrogen bonding interactions (CHBs). The hybrid polymer PAA-P4VP presented higher NH3 capacity (18.2 mmol g-1 at 298 K and 1 bar NH3 pressure) than PAA (6.0 mmol g-1) through the acid-base reaction and the assistance from CHBs with NH3, while the NH3 desorption from PAA-P4VP was easier for the reformation of CHBs. Based on the introduction of CHBs, a series of mesoporous acid-base hybrid polymers was synthesized with NH3 adsorption capacity of 15.8-19.3 mmol g-1 and high selectivity of NH3 over CO2 (SNH3/CO2 = 25.4-56.3) and N2 (SNH3/N2 = 254-1068), and the possible co-existing gases, such as SO2, had a lower effect on NH3 uptake by hybrid polymers. Overall, the hybrid polymers present efficient NH3 adsorption owing to the abundant acidic moieties and CHBs, while the concomitant Lewis bases promote NH3 desorption.

Application of Hydrogen-Bonded Organic Frameworks in Environmental Remediation: Recent Advances and Future Trends

The hydrogen-bonded organic frameworks (HOFs) are a class of porous materials with crystalline frame structures, which are self-assembled from organic structures by hydrogen bonding in non-covalent bonds π-π packing and van der Waals force interaction. HOFs are widely used in environmental remediation due to their high specific surface area, ordered pore structure, pore modifiability, and post-synthesis adjustability of various physical and chemical forms. This work summarizes some rules for constructing stable HOFs and the synthesis of HOF-based materials (synthesis of HOFs, metallized HOFs, and HOF-derived materials). In addition, the applications of HOF-based materials in the field of environmental remediation are introduced, including adsorption and separation (NH3, CO2/CH4 and CO2/N2, C2H2/C2He and CeH6, C2H2/CO2, Xe/Kr, etc.), heavy metal and radioactive metal adsorption, organic dye and pesticide adsorption, energy conversion (producing H2 and CO2 reduced to CO), organic dye degradation and pollutant sensing (metal ion, aniline, antibiotic, explosive steam, etc.). Finally, the current challenges and further studies of HOFs (such as functional modification, molecular simulation, application extension as remediation of contaminated soil, and cost assessment) are discussed. It is hoped that this work will help develop widespread applications for HOFs in removing a variety of pollutants from the environment.

Multifunctional Porous Hydrogen-Bonded Organic Frameworks: Current Status and Future Perspectives

Hydrogen-bonded organic frameworks (HOFs), self-assembled from organic or metalated organic building blocks (also termed as tectons) by hydrogen bonding, π-π stacking, and other intermolecular interactions, have become an emerging class of multifunctional porous materials. So far, a library of HOFs with high porosity has been synthesized based on versatile tectons and supramolecular synthons. Benefiting from the flexibility and reversibility of H-bonds, HOFs feature high structural flexibility, mild synthetic reaction, excellent solution processability, facile healing, easy regeneration, and good recyclability. However, the flexible and reversible nature of H-bonds makes most HOFs suffer from poor structural designability and low framework stability. In this Outlook, we first describe the development and structural features of HOFs and summarize the design principles of HOFs and strategies to enhance their stability. Second, we highlight the state-of-the-art development of HOFs for diverse applications, including gas storage and separation, heterogeneous catalysis, biological applications, sensing, proton conduction, and other applications. Finally, current challenges and future perspectives are discussed.

A dish-like molecular architecture for dynamic ultralong room-temperature phosphorescence through reversible guest accommodation

Developing dynamic organic ultralong room-temperature phosphorescent (URTP) materials is of practical importance in various applications but remains a challenge due to the difficulty in manipulating aggregate structures. Herein, we report a dish-like molecular architecture via a bottom-up way, featuring guest-responsive dynamic URTP. Through controlling local fragment motions in the molecular architecture, fascinating dynamic URTP performances can be achieved in response to reversible accommodation of various guests, including solvents, alkyl bromides and even carbon dioxide. Large-scale regulations of phosphorescence lifetime (100-fold) and intensity (10-fold) can be realized, presenting a maximum phosphorescence efficiency and lifetime of 78.8% and 483.1 ms, respectively. Moreover, such a dish-like molecular architecture is employed for temperature-dependent multiple information encryption and visual identification of linear alkyl bromides. This work can not only deepen our understanding to construct multifunctional organic aggregates, but also facilitate the design of high-performance dynamic URTP materials and enrich their practical applications.

Novel Stimuli-Responsive Spiropyran-Based Switch@HOFs Materials Enable Dynamic Anticounterfeiting

Developing smart fluorescent materials having very advanced levels, showing dynamic displays of encrypted messaging, remains a huge challenge. In this paper, we present a unique method based on combining a common photochromic molecule spiropyran (SP) with hydrogen-bonded organic frameworks (HOFs), which allows for reversible switching of SP in solid states and shows dynamic displays of encrypted information. With the irradiation time extended, the fluorescence emission undergo an evident transformation from yellow-green to orange to red, because of the fluorescence resonance energy transfer (FRET) process between the unique HOFs and merocyanine (MC) isomer. By doping with polydimethylsiloxane (PDMS), we obtained free-standing membranes with high flexibility and mechanical strength, which can be reversibly and repeatedly bent and folded at angles of >90°. Notably, the comparison of fatigue resistance between SP2/PDMS (can be used for no more than 5 times) and SP2 ⊂ HOF2/PDMS (can be used for more than 100 times) further proved the importance of HOFs. This composite system has many advantages: (1) it has diverse dynamic fluorescence emission and visible colors regulated by ultraviolet radiation with high contrast and can be reversibly converted; (2) these changes in behavior can be achieved by simple UV illumination; and (3) compared with previous work, this work not only shows the dynamic fluorescence emission, but also shows the dynamic information during the decryption.

Structure and functional group regulation of plastics for efficient ammonia capture

Activated carbon and metal organic frameworks have been tested as NH₃ recovery adsorbents, however, they are limited due to low NH₃ adsorption capacity and high cost, respectively. In this study, ethylene glycol dimethacrylate (EGDMA) polymers as the representative ester plastics were tested, and their structure and adsorption sites were regulated using HNO₃, HCl, or H₂SO₄ with varied H⁺ concentrations. The results showed that the EGDMA polymers all used hydrolysis which promoted NH₃ adsorption via different mechanisms. With HNO₃ and HCl optimization, an increased surface area promoted NH₃ adsorption via physical forces. H₂SO₄ optimization resulted in -COOH, -OH, and -SO₃H formation, which reacted with NH₃ by chemical adsorption and hydrogen bonds. This significantly increased the NH₃ adsorption capacity (85.99 mg·g^-1) compared to the material before optimization (0.36 mg·g^-1). This study presents a novel low-cost and efficient method to recycle waste plastics as NH₃ adsorbents.

Periodically nanoporous hydrogen-bonded organic frameworks for high performance photocatalysis

The development of highly catalytic hydrogen-bonded organic frameworks (HOFs) is of great importance, but remains challenging. Herein, we demonstrate the fabrication of a periodically nanoporous HOF for high performance photocatalysis. Compared with the conventional microporous HOFs, the nanoporous HOF architecture has a larger number of free carboxyl groups on the surface and presents greatly improved photoelectrochemical properties. It exhibits high catalytic activity for the photo-oxidative coupling of amines under mild conditions such as air atmosphere and room temperature and without any co-catalysts, sacrificial reagents or photosensitizers. The relationship between the structure, properties and catalytic performance of the nanoporous HOF was studied by experimental and theoretical investigations. It shows that such a HOF structure facilitates reactant adsorption and O₂ dissociation, thus promoting the oxidative coupling reaction. This work provides a new way for improving the catalytic performance of a single HOF.

Design Rules of Hydrogen-Bonded Organic Frameworks with High Chemical and Thermal Stabilities

Hydrogen-bonded organic frameworks (HOFs), self-assembled from strategically pre-designed molecular tectons with complementary hydrogen-bonding patterns, are rapidly evolving into a novel and important class of porous materials. In addition to their common features shared with other functionalized porous materials constructed from modular building blocks, the intrinsically flexible and reversible H-bonding connections endow HOFs with straightforward purification procedures, high crystallinity, solution processability, and recyclability. These unique advantages of HOFs have attracted considerable attention across a broad range of fields, including gas adsorption and separation, catalysis, chemical sensing, and electrical and optical materials. However, the relatively weak H-bonding interactions within HOFs can potentially limit their stability and potential use in further applications. To that end, this Perspective highlights recent advances in the development of chemically and thermally robust HOF materials and systematically discusses relevant design rules and synthesis strategies to access highly stable HOFs.

A record ammonia adsorption by calcium chloride confined in covalent organic frameworks

Ammonia is a vital chemical raw material, but it is also a highly toxic environmenal pollutant. However, its highly efficient uptake and reversible release is a challenge. Herein, we have designed and synthesized a series of hybrid materials for efficient NH₃ capture by confining calcium chloride (CaCl₂) in a porous covalent organic framework (COF). A high capture capacity of 26.5 mmol g^-1 is obtained at 25 °C and 1 bar, which is the highest value among existing porous materials, and NH₃ can be easily desorbed at 80 °C under vacuum for 2 h. Particularly, the hybrid COF is highly efficient for the absorption of low NH₃ content. Such excellent performance is ascribed to the highly dispersion of CaCl₂ in the pores of the COF, and coordinating interaction of NH₃ to Ca²⁺ together with hydrogen bond interaction between NH₃ and Cl^-.

An anthracene-based Hydrogen-bonded Organic Framework as Bifunctional Fluorescent Sensor for the Detection of γ-Aminobutyric Acid and Nitrofurazone

Intelligent fluorescence detection for disease diagnosis has become a research hotspot. In the era of big data, machine learning (ML) for analyzing data and mining will be widely used in...

Luminescent organic porous crystals from non-cyclic molecules and their applications

Organic porous crystals from small and non-cyclic organic molecules can be constructed by various intermolecular weak interactions. Owing to their precise stacking types, intermolecular interaction and pore microstructure, the relationship...

Hybrid Nafion Membranes of Ionic Hydrogen-Bonded Organic Framework Materials for Proton Conduction and PEMFC Applications

As the high-power density and environmentally friendly energy resources, proton exchange membrane fuel cells (PEMFCs) have a promising future in portable power generation. Herein, the hybrid Nafion membranes of ionic hydrogen-bonded organic frameworks (iHOFs) for PEMFC applications are demonstrated. By adjusting the position of sulfonic groups on naphthalene disulfonic acid compounds, four iHOFs with different types of hydrogen bonds were synthesized successfully based on 1,1'-diamino-4,4'-bipyridylium and naphthalene disulfonic acid. The formation of hydrogen bond interactions between amino and sulfonate groups provides a rich hydrogen bond network, which makes such iHOFs have high conductivity, and the maximum value is 2.76 × 10^-3 S·cm^-1 at 100 °C and 98% RH. Besides, composite membrane materials were obtained by mixing Nafion and iHOFs, and the maximum proton conductivity values can achieve 1.13 × 10^-2 S·cm^-1 for 6%-iHOF-3/Nafion and 2.87 × 10^-3 S·cm^-1 for 6%-iHOF-4/Nafion membranes at 100 °C under 98% RH. Through the H₂/O₂ fuel cell performance test by using iHOF/Nafion as the solid electrolyte, the maximum power and current density values of hybrid membranes are 0.36 W·cm^-2 and 1.10 A·cm^-2 for 6%-iHOF-3/Nafion and 0.42 W·cm^-2 and 1.20 A·cm^-2 for 6%-iHOF-4/Nafion at 80 °C and 100% RH. This work provides a practicable approach for establishing high-performance proton exchange hybrid membranes by doping high proton-conducting iHOFs into the Nafion matrix.

A Solid Transformation into Carboxyl Dimers Based on a Robust Hydrogen-Bonded Organic Framework for Propyne/Propylene Separation

Self-assembly of N,N,N',N'-tetrakis(4-carboxyphenyl)-1,4-phenylenediamine with the help of different solvents provides isostructural hydrogen-bonded organic frameworks (HOF-30). Single-crystal X-ray diffraction (SCXRD) analysis reveals HOF-30 possesses 3D ten-fold interpenetrated dia nets connected by two kinds of hydrogen bonds, namely solvent-bridged carboxyl dimers and carboxyl⋅⋅⋅carboxyl dimers. Degassing treatment for HOF-30 yields HOF-30a with 3D ten-fold interpenetrated dia nets but linked with sole carboxyl⋅⋅⋅carboxyl dimers. Reversible hydrogen-bond-to-hydrogen-bond transformation between solvent-bridged carboxyl dimers in HOF-30 and carboxyl⋅⋅⋅carboxyl dimers in HOF-30a has been unveiled by single-crystal and powder X-ray diffraction. In addition, HOF-30a enables the selective adsorption of propyne over propylene according to single-component sorption and breakthrough experiments. The preferred propyne location in HOF has also been identified by SCXRD test.

Enhancing toxic gas uptake performance of Zr-based MOF through uncoordinated carboxylate and copper insertion; ammonia adsorption

This study reports the development of a new type of Zr-based MOF by inserting copper and carboxylate into HCl modulated UiO-67 (UiO-67-vac) which gained higher surface area/vacant than UiO-67. Copper was inserted into MOF containing uncoordinated carboxylate group, to create open metal site in the form of -COOCu which called UiO-67-ox-Cu. PXRD, FTIR, BET, SEM, EDS, UV-Vis and XPS were used to characterize the obtained MOFs. As expected, UiO-67-ox-Cu exhibits the highest ammonia capacity (178.3 mg/g) among UiO-67 (104 mg/g) and UiO-67-vac (121 mg/g) at 298 K and 1 bar pressure. In fact, the significant increase in ammonia uptake of UiO-67-ox-Cu is related to the modified binding affinity of -COOCu groups with ammonia. Moreover, UiO-67-vac with the highest surface area showed the hydrogen adsorption capacity of 18.75 mg/g at 77 K, which is comparable or even superior to the previously reported value. Interestingly, adsorption capacities were retained with slight changes around five cycles and three regeneration temperatures, 25, 60 and 120 °C under vacuum pressure which were proved by PXRD after ammonia adsorption/desorption. The good results obtained in the current work clearly show the role of postsynthesis functionalization approach for creation of new metal/active sites into MOFs.

Highly Porous Ionic Solids Consisting of AuI3CoIII2 Complex Anions and Aqua Metal Cations

Treatment of Na₃[Au₃Co₂(d-pen)₆] (Na₃[1]; d-H₂pen = d-penicillamine) with M(OAc)₂ (M = Ni^II, Mn^II) in water gave ionic crystals of [M(H₂O)₆]₃[1]₂ (2^M) in which [1]^3- anions are hydrogen-bonded with [M(H₂O)₆]²⁺ cations to form a 3D porous framework with a porosity of ca. 80%. Soaking crystals of 2^Ni in its mother liquor afforded crystals of [Ni(H₂O)₆]₂[{Ni(H₂O)₄}(1)₂] (3^Ni) in which [1]^3- anions are connected to trans-[Ni(H₂O)₄]²⁺ and [Ni(H₂O)₆]²⁺ cations through coordination and hydrogen bonds, respectively, to form a 1D porous framework with a porosity ca. 60%. Further soaking crystals led to [{Ni(H₂O)₄}₃(1)₂] (4^Ni), in which [1]^3- anions are connected to cis-[Ni(H₂O)₄]²⁺ and trans-[Ni(H₂O)₄]²⁺ cations through coordination bonds in a dense framework with a porosity of ca. 30%. A similar two-step crystal-to-crystal transformation mediated by solvent proceeded when crystals of 2^Mn were soaked in a mother liquor. However, the transformation of 2^Mn generated [{Mn(H₂O)₄}(H1)] (4'^Mn) as the final product, in which [H1]^2- anions are connected to cis-[Mn(H₂O)₄]²⁺ cations through coordination bonds in a very dense framework with a porosity ca. 5% by way of [Mn(H₂O)₆]₂[{Mn(H₂O)₄}(1)₂] (3^Mn), which is isostructural with 3^Ni. While all the compounds adsorbed H₂O and CO₂ depending on the degree of their porosity, unusually large NH₃ adsorption capacities were observed for 4^Ni and 4'^Mn, which have dense frameworks.

Boosting Ammonia Uptake within Metal-Organic Frameworks by Anion Modulating Strategy

Ammonia with toxic and corrosive features needs advanced protective materials and removal tools, although it is a vital component in human food supply processes. So, to satisfy these requirements, materials with high adsorption capacity and affinity for ammonia should be developed. The present research has been focused on a series zinc-based metal-organic frameworks (MOF) containing mixed ligands, biphenyl dicarboxylic acid (BPDA) and tris(4-(4H-1,2,4-triazol-4-yl)phenyl)amine (TTPA), which are modulated by different anions including CH₃COO^-, CF₃COO^-, and CF₃SO₃^-. Ammonia uptake capacity was measured via static and dynamic conditions under 50% relative humidity. Among all compounds, CF₃SO₃^- anion could enhance the ammonia uptake capacity of MOFs up to 177.85 and 349 mg/g during static and breakthrough measurements, respectively, so that 83.30% of the total uptake capacity (at P/P_o = 1.0 and 298 K) was achieved at low relative pressure range (up to 0.1). The isosteric heats of ammonia adsorption on PFC-27 and derivatives were calculated in the range of 7.03-10.16 kJ mol^-1 so that they increased upon CF₃SO₃^-, CF₃COO^-, and CH₃COO^- ion incorporation. This is potentially beneficial for enhanced ammonia adsorption. Interestingly, adsorption capacities were retained with only slight changes after five cycles and three regeneration temperatures, 25 °C, 60 °C, and 120 °C, under vacuum. The special affinity for NH₃ adsorption and MOF phase stability after desorption is clearly proved by FTIR spectra and PXRD analysis, respectively. Generally, the results suggest that ion insertion modification is an efficient strategy for enhancement of MOF adsorption performance.

Ionic framework constructed with protic ionic liquid units for improving ammonia uptake

In this work, an ionic framework [Ph3ImH][Tf2N]2 constructed from protic imidazolium ionic liquid units through ionic and hydrogen bonding interactions was synthesized for selective ammonia uptake. Investigation of the NH3 uptake mechanism indicates that the acid sites in [Ph3ImH][Tf2N]2 would be frustrated when contacted with NH3, and the frustration of [Ph3ImH][Tf2N]2 precipitates NH3 capture by hydrogen bonding and physical interactions, and the NH3 could be released under mild conditions. There was no obvious decrease in capacity over 10 consecutive cycles of ammonia uptake and release.

Stable hydrogen-bonded organic frameworks for selective fluorescence detection of Al3+ and Fe3+ ions

Two pairs of HOFs were prepared with H4TCPE ligand under different conditions, and 3 and 4 have high stability and exhibit fluorescence quenching and enhancement toward Fe3+ and Al3+ ions, respectively.

Emerging Porous Materials and Their Composites for NH3 Gas Removal

NH3, essential for producing artificial fertilizers and several military and commercial products, is being produced at a large scale to satisfy increasing demands. The inevitable leakage of NH3 during its utilization, even in trace concentrations, poses significant environmental and health risks because of its highly toxic and reactive nature. Although numerous techniques have been developed for the removal of atmospheric NH3, conventional NH3 abatement systems possess the disadvantages of high maintenance cost, low selectivity, and emission of secondary wastes. In this context, highly tunable porous materials such as metal-organic frameworks, covalent organic frameworks, hydrogen organic frameworks, porous organic polymers, and their composite materials have emerged as next-generation NH3 adsorbents. Herein, recent progress in the development of porous NH3 adsorbents is summarized; furthermore, factors affecting NH3 capture are analyzed to provide a reasonable strategy for the design and synthesis of promising materials for NH3 abatement.

Hydrogen-Bonded Organic Frameworks as a Tunable Platform for Functional Materials

As a novel class of porous crystalline materials, hydrogen-bonded organic frameworks (HOFs), self-assembled from organic or metal-organic building blocks through intermolecular hydrogen-bonding interactions, have attracted more and more attention. Over the past decade, a number of porous HOFs have been constructed through judicious selection of H-bonding motifs, which are further enforced by other weak intermolecular interactions such as π-π stacking and van der Waals forces and framework interpenetration. Since the H-bonds are weaker than coordinate and covalent bonds used for the construction of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), HOFs have some unique features such as mild synthesis condition, solution processability, easy healing, and regeneration. These features enable HOFs to be a tunable platform for the construction of functional materials. Here, we review the H-bonding motifs used for constructing porous HOFs and highlight some of their applications, including gas separation and storage, chiral separation and structure determination, fluorescent sensing, heterogeneous catalysis, biological applications, proton conduction, photoluminescent materials, and membrane-based applications.

Hydrogen-bonded metallosupramolecular helices composed of a nona-protonated spherical RhIII4ZnII4 cluster with twelve carboxylate arms

Anion-controlled formation of hydrogen-bonded metallosupramolecular helices from a RhIII4ZnII4 polycarboxylate is reported.

A novel mesoporous hydrogen-bonded organic framework with high porosity and stability

A highly chemically and thermally stable mesoporous hydrogen-bonded organic framework with a high surface area and a large pore volume has been rationally designed and constructed.