Highly Efficient Porous Carbon Electrocatalyst with Controllable N-Species Content for Selective CO2 Reduction

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Carbon Dioxide Capture and Conversion Using Metal-Organic Framework (MOF) Materials: A Comprehensive Review

The escalating threat of anthropogenic climate change has spurred an urgent quest for innovative CO2 capture and utilization (CCU) technologies. Metal-organic frameworks (MOFs) have emerged as prominent candidates in CO2 capture and conversion due to their large specific surface area, well-defined porous structure, and tunable chemical properties. This review unveils the latest advancements in MOF-based materials specifically designed for superior CO2 adsorption, precise separation, advanced photocatalytic and electrocatalytic CO2 reduction, progressive CO2 hydrogenation, and dual functionalities. We explore the strategies that enhance MOF efficiency and examine the challenges of and opportunities afforded by transitioning from laboratory research to industrial application. Looking ahead, this review offers a visionary perspective on harnessing MOFs for the sustainable capture and conversion of CO2.

Customizing pyridinic nitrogen coordination in Ni-N-C for electrocatalytic CO2reduction towards CO

Nickel anchored N-doped carbon electrocatalysts (Ni-N-C) are rapidly developed for the electrochemical reduction reaction of carbon dioxide (CO2RR). However, the high-performanced Ni-N-C analogues design for CO2RR remains bewilderment, for the reason lacking of definite guidance for its structure-activity relationship. Herein, the correlation between the proportion of nitrogen species derived from various nitrogen sources and the CO2RR activity of Ni-N-C is investigated. The x-ray photoelectron spectroscopy (XPS) spectrum combined with the CO2RR performance results show that pyridinic-N content has a positive correlation with CO2RR activity. Moreover, density functional theory (DFT) demonstrates that pyridinic-N coordinated Ni-N4sites offers optimized free energy and favorable selectivity towards CO2RR compared with pyrrolic-N. Accordingly, Ni-Na-C with highest pyridinic-N content (ammonia as nitrogen source) performs superior CO2RR activity, with the maximum carbon monoxide faradaic efficiency (FECO) of 99.8% at -0.88 V vs. RHE and the FECOsurpassing 95% within potential ranging of -0.88 to -1.38 V vs. RHE. The building of this parameter for CO2RR activity of Ni-N-C give instructive forecast for low-cost and highly active CO2RR electrocatalysts.

Boosting electrocatalytic nitrate-to-ammonia of single Fe active sites via coordination engineering: From theory to experiments

Atomically dispersed iron-nitrogen-carbon (Fe-N4-C) catalysts show great promises for the electrocatalytic nitrate (NO3-) reduction to ammonia (NH3). Nevertheless, the microenvironmental engineering of the single Fe active sites for further optimizing the catalytic performance remains a challenge. Herein, we proposed to regulate the coordination environment of single Fe active sites to boost its intrinsic electrocatalytic activity for NO3- -to-NH3 conversion by the incorporation of new heteroatoms, including B, C, O, Si, P, and S. Our results revealed that most of the candidates possess low formation energies, showing great potential for experimental synthesis. Moreover, incorporating heteroatoms effectively modulates the charge redistribution and the d-band center of single Fe active sites, enabling the regulation of the binding strength of nitrogenous intermediates. As a result, the N and C coordinated Fe active site (Fe-N3C) exhibits superior catalytic performance for NO3- electroreduction with a relatively low limiting potential (-0.13 V) due to its optimal adsorption strength with nitrogenous intermediates induced by its moderate charge and d-band center. Importantly, our experimental measures confirmed such theoretical prediction: a maximum NH3 yield rate of 21.07 mg h-1 mgcat.-1 and 95.74 % Faradaic efficiency were achieved for NO3- electroreduction on Fe-N3C catalyst. These findings not only suggest a highly efficient catalyst for nitrate reduction but also provide insight into how to design and prepare electrocatalysts with enhanced catalytic performance.

Pyrenetetrasulfonate-grafted 2D ultrathin metal-organic layer as new electrochemiluminescence emitters for ultrasensitive microRNA-21 assay

The exploration of novel electrochemiluminescence (ECL) luminophores with excellent ECL properties is a current research hotspot in the ECL field. Herein, a novel high-efficiency Ru-complex-free ECL emitter PyTS-Zr-BTB-MOL has been prepared by using porous ultrathin Zr-BTB metal-organic layer (MOL) as carrier to coordinatively graft the cheap and easily available polycyclic aromatic hydrocarbon (PAH) derivative luminophore PyTS whose ECL performance has never been investigated. Gratifyingly, the ECL intensity and efficiency of PyTS-Zr-BTB-MOL were markedly enhanced compared to both PyTS monomers and PyTS aggregates. The main reason was that the distance between pyrene rings was greatly expanded after the PyTS grafting on the Zr6 clusters of Zr-BTB-MOL, which overcame the aggregation-caused quenching (ACQ) effect of PyTS and thus enhanced the ECL emission. Meanwhile, the porous nanosheet structure of PyTS-Zr-BTB-MOL could distinctly increase the exposure of PyTS luminophores and shorten the diffusion paths of coreactants and electrons/ions, which effectively promoted the electrochemical excitation of more PyTS luminophores and thus achieved a further ECL enhancement. In light of the remarkable ECL property of PyTS-Zr-BTB-MOL, it was employed as an ECL indicator to build a novel high-sensitivity ECL biosensor for microRNA-21 determination, possessing a satisfactory response range (100 aM to 100 pM) and an ultralow detection limit (10.4 aM). Overall, this work demonstrated that using MOLs to coordinatively graft the PAH derivative luminophores to eliminate the ACQ effect and increase the utilization rate of the luminophores is a promising and efficient strategy to develop high-performance Ru-complex-free ECL materials for assembling ultrasensitive ECL biosensing platforms.

Linkage Engineering in Covalent Organic Frameworks for Metal-Free Electrocatalytic C2H4 Production from CO2

Electrocatalytic carbon dioxide reduction reaction (CO2RR) to produce ethylene (C2H4) is conducive to sustainable development of energy and environment. At present, most electrocatalysts for C2H4 production are limited to the heavy metal copper, meanwhile, achieving metal-free catalysis remains a challenge. Noted piperazine with sp3 N hybridization is beneficial to CO2 capture, but CO2RR performance and mechanism have been lacking. Herein, based on linkage engineering, we construct a novel high-density sp3 N catalytic array via introducing piperazine into the crystalline and microporous aminal-linked covalent organic frameworks (COFs). Thanks to its high sp3 N density, strong CO2 capture capacity and great hydrophilicity, aminal-linked COF successfully achieves the conversion of CO2 to C2H4 with a Faraday efficiency up to 19.1 %, which is stand out in all reported metal-free COF electrocatalysts. In addition, a series of imine-linked COFs are synthesized and combined with DFT calculations to demonstrate the critical role of sp3 N in enhancing the kinetics of CO2RR. Therefore, this work reveals the extraordinary potential of linkage engineering in COFs to break through some catalytic bottlenecks.

MOF-based/derived catalysts for electrochemical overall water splitting

Water-splitting electrocatalysis has gained increasing attention as a promising strategy for developing renewable energy in recent years, but its high overpotential caused by the unfavorable thermodynamics has limited its widespread implementation. Therefore, there is an urgent need to design catalytic materials with outstanding activity and stability that can overcome the high overpotential and thus improve the electrocatalytic efficiency. Metal-organic frameworks (MOFs) based and/or derived materials are widely used as water-splitting catalysts because of their easily controlled structures, abundant heterointerfaces and increased specific surface area. Herein, some recent research findings on MOFs-based/derived materials are summarized and presented. First, the mechanism and evaluation parameters of electrochemical water splitting are described. Subsequently, advanced modulation strategies for designing MOFs-based/derived catalysts and their catalytic performance toward water splitting are summarized. In particular, the correlation between chemical composition/structural functionalization and catalytic performance is highlighted. Finally, the future outlook and challenges for MOFs materials are also addressed.

Metal-Organic Framework (MOF)-Based Clean Energy Conversion: Recent Advances in Unlocking its Underlying Mechanisms

Carbon neutrality is an important goal for humanity . As an eco-friendly technology, electrocatalytic clean energy conversion technology has emerged in the 21st century. Currently, metal-organic framework (MOF)-based electrocatalysis, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), hydrogen oxidation reaction (HOR), carbon dioxide reduction reaction (CO2RR), nitrogen reduction reaction (NRR), are the mainstream energy catalytic reactions, which are driven by electrocatalysis. In this paper, the current advanced characterizations for the analyses of MOF-based electrocatalytic energy reactions have been described in details, such as density function theory (DFT), machine learning, operando/in situ characterization, which provide in-depth analyses of the reaction mechanisms related to the above reactions reported in the past years. The practical applications that have been developed for some of the responses that are of application values, such as fuel cells, metal-air batteries, and water splitting have also been demonstrated. This paper aims to maximize the potential of MOF-based electrocatalysts in the field of energy catalysis, and to shed light on the development of current intense energy situations.

Contribution of 1O2 in the efficient degradation of organic pollutants with Cu0/Cu2O/CuO@N-C activated peroxymonosulfate: A Case study with tetracycline

Peroxymonosulfate-mediated advanced oxidation processes (PMS-AOPs) degrading organic pollutants (Tetracycline (TC) as an example) in water with singlet oxygen (1O2) as the main reactive oxygen has received more and more attention. However, the generation mechanism of 1O2 is still unclear. Consequently, this study investigates the 1O2 formation mechanism during the activated PMS process using a nitrogen-copper-loaded carbon-based material (Cu0/Cu2O/CuO@N-C), synthesized by thermally decomposing organobase-modified HKUST-1 via a one-pot method. It was discovered that incorporating an organobase (Benzylamine) into the metal organic framework (MOF) precursor directs the MOF's self-assembly process and supplements its nitrogen content. This modification modulates the Nx-Cu-Oy active site formation in the material, selectively producing 1O2. Additionally, 1O2 was identified as the dominant reactive oxygen species in the Cu0/Cu2O/CuO@N-C-PMS system, contributing to TC degradation with a rate of 70.82%. The TC degradation efficiency remained high in the pH range of 3-11 and sustained its efficacy after five consecutive uses. Finally, based on the intermediates of TC degradation, three possible degradation pathways were postulated, and a reduction in the ecotoxicity of the degradation products was predicted. This work presents a novel and general strategy for constructing nitrogen-copper-loaded carbon-based materials for use in PMS-AOPs.

DFT-assisted low-dimensional carbon-based electrocatalysts design and mechanism study: a review

Low-dimensional carbon-based (LDC) materials have attracted extensive research attention in electrocatalysis because of their unique advantages such as structural diversity, low cost, and chemical tolerance. They have been widely used in a broad range of electrochemical reactions to relieve environmental pollution and energy crisis. Typical examples include hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), and nitrogen reduction reaction (NRR). Traditional "trial and error" strategies greatly slowed down the rational design of electrocatalysts for these important applications. Recent studies show that the combination of density functional theory (DFT) calculations and experimental research is capable of accurately predicting the structures of electrocatalysts, thus revealing the catalytic mechanisms. Herein, current well-recognized collaboration methods of theory and practice are reviewed. The commonly used calculation methods and the basic functionals are briefly summarized. Special attention is paid to descriptors that are widely accepted as a bridge linking the structure and activity and the breakthroughs for high-volume accurate prediction of electrocatalysts. Importantly, correlated multiple descriptors are used to systematically describe the complicated interfacial electrocatalytic processes of LDC catalysts. Furthermore, machine learning and high-throughput simulations are crucial in assisting the discovery of new multiple descriptors and reaction mechanisms. This review will guide the further development of LDC electrocatalysts for extended applications from the aspect of DFT computations.

Ni Single Atoms Embedded in Graphene Nanoribbon Sieves for High-Performance CO2 Reduction to CO

Ni single-atom catalysts (SACs) are appealing for electrochemical reduction CO2 reduction (CO2 RR). However, regulating the balance between the activity and conductivity remains a challenge to Ni SACs due to the limitation of substrates structure. Herein, the intrinsic performance enhancement of Ni SACs anchored on quasi-one-dimensional graphene nanoribbons (GNRs) synthesized is demonstrated by longitudinal unzipping carbon nanotubes (CNTs). The abundant functional groups on GNRs can absorb Ni atoms to form rich Ni-N4 -C sites during the anchoring process, providing a high intrinsic activity. In addition, the GNRs, which maintain a quasi-one-dimensional structure and possess a high conductivity, interconnect with each other and form a conductive porous framework. The catalyst yields a 44 mA cm-2 CO partial current density and 96% faradaic efficiency of CO (FECO ) at -1.1 V vs RHE in an H-cell. By adopting a membrane electrode assembly (MEA) flow cell, a 95% FECO and 2.4 V cell voltage are achieved at 200 mA cm-2 current density. This work provides a rational way to synthesize Ni SACs with a high Ni atom loading, porous morphology, and high conductivity with potential industrial applications.

Customization from Single to Dual Atomic Sites for Efficient Electrocatalytic CO2 Reduction to Value-added Chemicals

In recent years, single-atom catalysts (SACs) have received increasing attention in the field of electrochemical CO2 RR with their efficient atom utilization efficiency and excellent catalytic performance. However, their low metal loading and the presence of linear relationships for single active sites with simple structures possibly restrict their activity and practical applications. Active site tailoring at the atomic level is a visionary approach to break the existing limitations of SACs. This paper first briefly introduces the synthesis strategies of SACs and DACs. Then, combining previous experimental and theoretical studies, this paper introduces four optimization strategies, namely spin-state tuning engineering, axial functionalization engineering, ligand engineering, and substrate tuning engineering, for improving the catalytic performance of SACs in the electrochemical CO2 RR process by combining previous experimental and theoretical studies. Then it is introduced that DACs exhibit significant advantages over SACs in increasing metal atom loading, promoting the adsorption and activation of CO2 molecules, modulating intermediate adsorption, and promoting C-C coupling. At the end of this paper, we briefly and succinctly summarize the main challenges and application prospects of SACs and DACs in the field of electrochemical CO2 RR at present.

Curvature Effect of Pyridinic N-Modified Carbon Atom Sites for Electrocatalyzing CO2 Conversion to CO

Carbon material is considered a promising electrocatalyst for the CO2 reduction reaction (CO2RR); especially, N-doped carbon material shows high CO Faradic efficiency (FECO) when using pyridinic N species as the active site. However, in the past decade, more efforts were focused on the preparation of various carbon nanostructures containing abundant pyridinic N species and few researchers studied the electronic structure modulation of the pyridinic N site. The curvature of the carbon substrate is an easily controllable parameter for modulating the local electronic environment of catalytic sites. In this research, carbon nanotubes (CNTs) with different diameters are applied to modulate the electronic environment of pyridinic N by the curvature effect. The pyridinic N sites doped on CNTs with the average curvature of 0.04 show almost 100% FECO at the current density of 3 mA cm-2 at -0.6 V vs RHE and 91% FECO retention after 12 h test, which is superior to most of the carbon-based electrocatalysts. As demonstrated by density functional theory simulation, the pyridinic N site forms a strong local electric field around the nearby C active site and protrudes out of the curved CNT surface like a tip, which remarkably enriches the protons around the adsorbed CO2 molecule.

Ordering-Dependent Hydrogen Evolution and Oxygen Reduction Electrocatalysis of High-Entropy Intermetallic Pt4 FeCoCuNi

Disordered solid-solution high-entropy alloys have attracted wide research attention as robust electrocatalysts. In comparison, ordered high-entropy intermetallics have been hardly explored and the effects of the degree of chemical ordering on catalytic activity remain unknown. In this study, a series of multicomponent intermetallic Pt4 FeCoCuNi nanoparticles with tunable ordering degrees is fabricated. The transformation mechanism of the multicomponent nanoparticles from disordered structure into ordered structure is revealed at the single-particle level, and it agrees with macroscopic analysis by selected-area electron diffraction and X-ray diffraction. The electrocatalytic performance of Pt4 FeCoCuNi nanoparticles correlates well with their crystal structure and electronic structure. It is found that increasing the degree of ordering promotes electrocatalytic performance. The highly ordered Pt4 FeCoCuNi achieves the highest mass activities toward both acidic oxygen reduction reaction (ORR) and alkaline hydrogen evolution reaction (HER) which are 18.9-fold and 5.6-fold higher than those of commercial Pt/C, respectively. The experiment also shows that this catalyst demonstrates better long-term stability than both partially ordered and disordered Pt4 FeCoCuNi as well as Pt/C when subject to both HER and ORR. This ordering-dependent structure-property relationship provides insight into the rational design of catalysts and stimulates the exploration of many other multicomponent intermetallic alloys.

Research Progress on Porous Carbon-Based Non-Precious Metal Electrocatalysts

The development of efficient, stable, and economic electrocatalysts are key to the large-scale application of electrochemical energy conversion. Porous carbon-based non-precious metal electrocatalysts are considered to be the most promising materials to replace Pt-based catalysts, which are limited in large-scale applications due to high costs. Because of its high specific surface area and easily regulated structure, a porous carbon matrix is conducive to the dispersion of active sites and mass transfer, showing great potential in electrocatalysis. This review will focus on porous carbon-based non-precious metal electrocatalysts and summarize their new progress, focusing on the synthesis and design of porous carbon matrix, metal-free carbon-based catalysts, non-previous metal monatomic carbon-based catalyst, and non-precious metal nanoparticle carbon-based catalysts. In addition, current challenges and future trends will be discussed for better development of porous carbon-based non-precious metal electrocatalysts.

Graphene Oxide-Mediated Synthesis of Ultrathin Co-MOL for CO2 Photoreduction

Metal-organic framework (MOF) materials have broad application prospects in catalysis because of their ordered structure and molecular adjustability. However, the large volume of bulky MOF usually leads to insufficient exposure of the active sites and the obstruction of charge/mass transfer, which greatly limits their catalytic performance. Herein, we developed a simple graphene oxide (GO) template method to fabricate ultrathin Co-metal-organic layer (2.0 nm) on reduced GO (Co-MOL@r-GO). The as-synthesized hybrid material Co-MOL@r-GO-2 exhibits highly efficient photocatalytic performance for CO₂ reduction, and the CO yield can reach as high as 25,442 μmol/g_Co-MOL, which is over 20 times higher than that of the bulky Co-MOF. Systematic investigations demonstrate that GO can act as a template for the synthesis of the ultrathin Co-MOL with more active sites and can be used as the electron transport medium between the photosensitizer and the Co-MOL to enhance the catalytic activity for CO₂ photoreduction.

Competition of CO and Acetaldehyde Adsorption and Reduction on Copper Electrodes and Its Impact on n-Propanol Formation

Selective synthesis of n-propanol from electrocatalytic CO₂/CO reduction on copper remains challenging and the impact of the local interfacial effects on the production of n-propanol is not yet fully understood. Here, we investigate the competition between CO and acetaldehyde adsorption and reduction on copper electrodes and how it affects the n-propanol formation. We show that n-propanol formation can be effectively enhanced by modulating the CO partial pressure or acetaldehyde concentration in solution. Upon successive additions of acetaldehyde in CO-saturated phosphate buffer electrolytes, n-propanol formation was increased. Oppositely, n-propanol formation was the most active at lower CO flow rates in a 50 mM acetaldehyde phosphate buffer electrolyte. In a conventional carbon monoxide reduction reaction (CORR) test in KOH, we show that, in the absence of acetaldehyde in solution, an optimum ratio of n-propanol/ethylene formation is found at intermediate CO partial pressure. From these observations, we can assume that the highest n-propanol formation rate from CO₂RR is reached when a suitable ratio of CO and acetaldehyde intermediates is adsorbed. An optimum ratio was also found for n-propanol/ethanol formation but with a clear decrease in the formation rate for ethanol at this optimum, while the n-propanol formation rate was the highest. As this trend was not observed for ethylene formation, this finding suggests that adsorbed methylcarbonyl (adsorbed dehydrogenated acetaldehyde) is an intermediate for the formation of ethanol and n-propanol but not for ethylene. Finally, this work may explain why it is challenging to reach high faradaic efficiencies for n-propanol, as CO and the intermediates for n-propanol synthesis (like adsorbed methylcarbonyl) compete for active sites on the surface, where CO adsorption is favored.

Copper-based catalysts for the electrochemical reduction of carbon dioxide: progress and future prospects

There is an urgent need for the development of high performance electrocatalysts for the CO₂ reduction reaction (CO₂RR) to address environmental issues such as global warming and achieve carbon neutral energy systems. In recent years, Cu-based electrocatalysts have attracted significant attention in this regard. The present review introduces fundamental aspects of the electrocatalytic CO₂RR process together with a systematic examination of recent developments in Cu-based electrocatalysts for the electroreduction of CO₂ to various high-value multicarbon products. Current challenges and future trends in the development of advanced Cu-based CO₂RR electrocatalysts providing high activity and selectivity are also discussed.

A rational design of functional porous frameworks for electrocatalytic CO2 reduction reaction

The electrocatalytic CO₂ reduction reaction (ECO₂RR) is considered one of the approaches with the most potential to achieve lower carbon emissions in the future, but a huge gap still exists between the current ECO₂RR technology and industrial applications. Therefore, the design and preparation of catalysts with satisfactory activity, selectivity and stability for the ECO₂RR have attracted extensive attention. As a classic type of functional porous framework, crystalline porous materials (e.g., metal organic frameworks (MOFs) and covalent organic frameworks (COFs)) and derived porous materials (e.g., MOF/COF composites and pyrolysates) have been regarded as superior catalysts for the ECO₂RR due to their advantages such as designable porosity, modifiable skeleton, flexible active site structure, regulable charge transfer pathway and controllable morphology. Meanwhile, with the rapid development of nano-characterization and theoretical calculation technologies, the structure-activity relationships of functional porous frameworks have been comprehensively considered, i.e., metallic element type, local coordination environment, and microstructure, corresponding to selectivity, activity and mass transfer efficiency for the ECO₂RR, respectively. In this review, the rational design strategy for functional porous frameworks is briefly but precisely generalized based on three key factors including metallic element type, local coordination environment, and microstructure. Then, details about the structure-activity relationships for functional porous frameworks are illustrated in the order of MOFs, COFs, composites and pyrolysates to analyze the effect of the above-mentioned three factors on their ECO₂RR performance. Finally, the challenges and perspectives of functional porous frameworks for the further development of the ECO₂RR are reasonably proposed, aiming to offer insights for future studies in this intriguing and significant research field.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Facile Preparation of Cobalt Nanoparticles Encapsulated Nitrogen-Doped Carbon Sponge for Efficient Oxygen Reduction Reaction

The facile preparation of non-noble metal nanoparticle loaded carbon nanomaterials is promising for efficient oxygen reduction reaction (ORR) electrocatalysis. Herein, a facile preparation strategy is proposed to prepare nitrogen-doped carbon sponge loaded with fine cobalt nanoparticles by the direct pyrolysis of the cobalt ions adsorbed polymeric precursor. The polymeric sponge precursor with continuous framework and high porosity is formed by the self-assembly of a poly(amic acid). Taking advantage of the negatively charged surface and porous structure, cobalt ions can be efficiently adsorbed into the polymeric sponge. After pyrolysis, fine cobalt nanoparticles covered by carbon layers are formed, while the sponge-like structure of the precursor is also well-preserved in order to give cobalt nanoparticles loaded nitrogen-doped carbon sponges (Co/CoO@NCS) with a high loading content of 44%. The Co/CoO@NCS exhibits promising catalytic activity toward ORR with a half-wave potential of 0.830 V and a limiting current density of 4.71 mA cm^-2. Overall, we propose a facile polymer self-assembly strategy to encapsulate transition metal nanoparticles with high loading content on a nitrogen-doped carbon sponge for efficient ORR catalysis.

Self-Supported Porous Carbon Nanofibers Decorated with Single Ni Atoms for Efficient CO2 Electroreduction

Single-atom catalysts within M-N-C structures are efficient for electrochemical CO₂ reduction. However, most of them are powdered and require a coating process to load on the electrode. Herein, we developed a facile approach to the synthesis of large-scale self-supported porous carbon nanofiber electrodes directly decorated with atomically dispersed nickel active sites using facile electrospinning, where poly(methyl methacrylate) was employed to tune well the distributions of pores located in carbon nanofibers. The above self-supported carbon nanofibers were applied as a gas diffusion electrode to achieve 94.3% CO Faraday efficiency and 170 mA cm^-2 current density, which can be attributed to the effects of rich mesoporous structures favorable for adsorption and mass transfer of CO₂ and single nickel catalysts effectively converting CO₂ to CO. This work provides an efficient strategy to fabricate self-supported electrodes and may accelerate the progress toward industrial applications of single-atom catalysts in the field of CO₂ electroreduction.

Tailoring of Active Sites from Single to Dual Atom Sites for Highly Efficient Electrocatalysis

Single atom catalysts (SACs) have been attracting extensive attention in electrocatalysis because of their unusual structure and extreme atom utilization, but the low metal loading and unified single site induced scaling relations may limit their activity and practical application. Tailoring of active sites at the atomic level is a sensible approach to break the existing limits in SACs. In this review, SACs were first discussed regarding carbon or non-carbon supports. Then, five tailoring strategies were elaborated toward improving the electrocatalytic activity of SACs, namely strain engineering, spin-state tuning engineering, axial functionalization engineering, ligand engineering, and porosity engineering, so as to optimize the electronic state of active sites, tune d orbitals of transition metals, adjust adsorption strength of intermediates, enhance electron transfer, and elevate mass transport efficiency. Afterward, from the angle of inducing electron redistribution and optimizing the adsorption nature of active centers, the synergistic effect from adjacent atoms and recent advances in tailoring strategies on active sites with binuclear configuration which include simple, homonuclear, and heteronuclear dual atom catalysts (DACs) were summarized. Finally, a summary and some perspectives for achieving efficient and sustainable electrocatalysis were presented based on tailoring strategies, design of active sites, and in situ characterization.

The Critical Role of Initial/Operando Oxygen Loading in General Bismuth-Based Catalysts for Electroreduction of Carbon Dioxide

Operando reconstruction of solid catalyst into a distinct active state frequently occurs during electrocatalytic processes. The correlation between initial and operando states, if ever existing, is critical for the understanding and precise design of a catalytic system. Inspired by recently established intermediate metallic state of Bi-based catalysts during electrocatalytic carbon dioxide reduction (CO₂RR), here we investigate a series of Bi oxide catalysts (Bi, Bi₂O₃, BiO₂) and demonstrate that the operando surface/subsurface oxygen loading, positively correlated to the initial oxygen content, plays a critical role in determining Bi-based CO₂RR performance. Higher initial oxygen loading indicates a better electrocatalytic efficiency. Further analysis shows that this conclusion generally applies to all Bi-based electrocatalysts reported up to date. Following this principle, cost-effective BiO₂ nanocrystals demonstrated the highest formate Faradaic efficiency (FE) and current density compared to Bi/Bi₂O₃, further allowing a pair-electrolysis system with 800 mA/cm² current density and an overall 175% FE for formate production.

Tuning Electronic Structure and Composition of FeNi Nanoalloys for Enhanced Oxygen Evolution Electrocatalysis via a General Synthesis Strategy

Developing low-cost and efficient oxygen evolution electrocatalysts is key to decarbonization. A facile, surfactant-free, and gram-level biomass-assisted fast heating and cooling synthesis method is reported for synthesizing a series of carbon-encapsulated dense and uniform FeNi nanoalloys with a single-phase face-centered-cubic solid-solution crystalline structure and an average particle size of sub-5 nm. This method also enables precise control of both size and composition. Electrochemical measurements show that among Fe_x Ni_{(1- x )} nanoalloys, Fe_0.5 Ni_0.5 has the best performance. Density functional theory calculations support the experimental findings and reveal that the optimally positioned d-band center of O-covered Fe_0.5 Ni_0.5 renders a half-filled antibonding state, resulting in moderate binding energies of key reaction intermediates. By increasing the total metal content from 25 to 60 wt%, the 60% Fe_0.5 Ni_0.5 /40% C shows an extraordinarily low overpotential of 219 mV at 10 mA cm^-2 with a small Tafel slope of 23.2 mV dec^-1 for the oxygen evolution reaction, which are much lower than most other FeNi-based electrocatalysts and even the state-of-the-art RuO₂ . It also shows robust durability in an alkaline environment for at least 50 h. The gram-level fast heating and cooling synthesis method is extendable to a wide range of binary, ternary, quaternary nanoalloys, as well as quinary and denary high-entropy-alloy nanoparticles.

Synthetic carbon nanomaterials for electrochemical energy conversion

Carbon nanomaterials have attracted widespread attention in electrochemical energy conversion due to their large surface area, excellent electrical/thermal conductivity and good chemical stability. However, the structure-activity relationship of carbon nanomaterials remains unclear. This review is thus on the synthesis methods of carbon nanomaterials including two-dimensional graphene, graphene nanoribbons, nanographene, heteroatom doped porous carbon and graphdiyne as electrocatalysts for the hydrogen evolution reaction, oxygen evolution reaction, and oxygen reduction reaction in fuel cells, electrolyzers and CO₂ reduction. The correlation between the electronic/chemical properties and electrochemical performance of synthetic carbon nanostructures will be profoundly discussed. Additionally, the emerging challenges and some perspectives on the development of synthetic carbon nanomaterials for electrochemical energy conversion are discussed.

Copper-Based Catalysts for Electrochemical Carbon Dioxide Reduction to Multicarbon Products

Electrochemical conversion of carbon dioxide into fuel and chemicals with added value represents an appealing approach to reduce the greenhouse effect and realize a carbon-neutral cycle, which has great potential in mitigating global warming and effectively storing renewable energy. The electrochemical CO2 reduction reaction (CO2RR) usually involves multiproton coupling and multielectron transfer in aqueous electrolytes to form multicarbon products (C2+ products), but it competes with the hydrogen evolution reaction (HER), which results in intrinsically sluggish kinetics and a complex reaction mechanism and places higher requirements on the design of catalysts. In this review, the advantages of electrochemical CO2 reduction are briefly introduced, and then, different categories of Cu-based catalysts, including monometallic Cu catalysts, bimetallic catalysts, metal-organic frameworks (MOFs) along with MOF-derived catalysts and other catalysts, are summarized in terms of their synthesis method and conversion of CO2 to C2+ products in aqueous solution. The catalytic mechanisms of these catalysts are subsequently discussed for rational design of more efficient catalysts. In response to the mechanisms, several material strategies to enhance the catalytic behaviors are proposed, including surface facet engineering, interface engineering, utilization of strong metal-support interactions and surface modification. Based on the above strategies, challenges and prospects are proposed for the future development of CO2RR catalysts for industrial applications.

Graphical Abstract

Heteroatom-Doped Porous Carbon-Based Nanostructures for Electrochemical CO2 Reduction

The continual rise of the CO2 concentration in the Earth's atmosphere is the foremost reason for environmental concerns such as global warming, ocean acidification, rising sea levels, and the extinction of various species. The electrochemical CO2 reduction (CO2RR) is a promising green and efficient approach for converting CO2 to high-value-added products such as alcohols, acids, and chemicals. Developing efficient and low-cost electrocatalysts is the main barrier to scaling up CO2RR for large-scale applications. Heteroatom-doped porous carbon-based (HA-PCs) catalysts are deemed as green, efficient, low-cost, and durable electrocatalysts for the CO2RR due to their great physiochemical and catalytic merits (i.e., great surface area, electrical conductivity, rich electrical density, active sites, inferior H2 evolution activity, tailorable structures, and chemical-physical-thermal stability). They are also easily synthesized in a high yield from inexpensive and earth-abundant resources that meet sustainability and large-scale requirements. This review emphasizes the rational synthesis of HA-PCs for the CO2RR rooting from the engineering methods of HA-PCs to the effect of mono, binary, and ternary dopants (i.e., N, S, F, or B) on the CO2RR activity and durability. The effect of CO2 on the environment and human health, in addition to the recent advances in CO2RR fundamental pathways and mechanisms, are also discussed. Finally, the evolving challenges and future perspectives on the development of heteroatom-doped porous carbon-based nanocatalysts for the CO2RR are underlined.

Peroxymonosulfate Activation on Synergistically Enhanced Single-Atom Co/Co@C for Boosted Chemiluminescence of Tris(bipyridine) Ruthenium(II) Derivative

Tris(bipyridine) ruthenium(II)-based luminophores have been well developed in the area of electrochemiluminescence, while their applications in chemiluminescence (CL) are rarely studied due to the poor luminous efficiency and complicated CL reaction. Herein, a novel tris(bipyridine) ruthenium(II)-based ternary CL system is proposed by introducing cobalt single atoms integrated with graphene-encapsulated cobalt nanoparticles (Co SAs/Co@C) and peroxymonosulfate (PMS) as advanced coreaction accelerator and promising coreactant, respectively. On the basis of the experimental results and density functional theory calculations, it is concluded that Co@C can synergistically modulate the adsorption behavior of PMS on Co SAs and then efficiently activate PMS to produce massive singlet oxygen for remarkable CL emission. Under the optimum conditions, the as-prepared CL biosensor exhibits a good linear range, excellent sensitivity, and selectivity, holding great potential for the practical detection of prostate-specific antigen in human serum.

Surfactant-modified Zn nanosheets on carbon paper for electrochemical CO2 reduction to CO

We report a strategy that tunes the CO₂ and proton concentrations near the electrode-electrolyte interface using surfactant modification with various amounts (0.05, 0.8, 1.6, and 3.2 mg) of hexadecyl trimethyl ammonium bromide (CTAB). The positively charged group of CTAB favors CO₂ surface diffusion and inhibits excessive proton accumulation on Zn nanosheets on carbon paper. A CO faradaic efficiency of 95.6% and a total ampere density of -13.1 mA cm^-2 were obtained over the optimal CTAB-modified Zn electrode at -1.1 V with stability over 12 hours.

Achieving high selectivity towards electro-conversion of CO2 using In-doped Bi derived from metal-organic frameworks

Metal-organic frameworks (MOFs) and their derivatives have shown great potential as electrocatalysts, in virtue of their ease of functionalization and abundance of active sites. Here, we report a series of indium-doped bismuth MOF-derived composites (BiIn_X-Y@C) for the direct conversion of carbon dioxide (CO₂) to hydrocarbon derivatives. Amongst the catalysts studied, BiIn₅-500@C demonstrated high selectivity for the production of formate and intrinsic activity in a wide potential window, ranging from - 1.16 to - 0.76 V vs. RHE (V_RHE). At - 0.86 V_RHE, the Faradaic efficiency and total current density were determined as 97.5% and - 13.5 mA cm^-2, respectively. In addition, a 15-h stability test shows no obvious signs of deactivation. Complementary density functional theory (DFT) calculations revealed that the In-doped Bi₂O₃ are the predominant active centers for HCOOH production in the reduction of CO₂ under the action of the BiIn_X-Y@C catalyst. This work provides new detailed insights into reaction mechanism, and selectivity for reduction of CO₂via MOFs, which are expected to inspire and guide the design of novel, selective and efficient catalysts.

Facile Synthesis of Fe@C Loaded on g-C3N4 for CO2 Electrochemical Reduction to CO with Low Overpotential

Electrochemical CO₂ reduction has been acknowledged as a hopeful tactic to alleviate environmental and global energy crises. Herein, we designed an Fe@C/g-C₃N₄ heterogeneous nanocomposite material by a simple one-pot method, which we applied to the electrocatalytic CO₂ reduction reaction (ECR). Our optimized 20 mg-Fe@C/g-C₃N₄-1100 catalyst displays excellent performance for the ECR and a maximum Faradaic efficiency (FE) of 88% with a low overpotential of -0.38 V vs. RHE. The Tafel slope reveals that the first electron transfer, which involves a surface-adsorbed *COOH intermediate, is the rate-determining step for 20 mg-Fe@C/C₃N₄-1100 during the ECR. More precisely, the coordinating capability of the g-C₃N₄ framework and Fe@C species as a highly active site promote the intermediate product transmission. These results indicate that the combination of temperature adjustment and precursor optimization is key to facilitating the ECR of an iron-based catalyst.

Acidic Electrocatalytic CO2 Reduction Using Space-Confined Nanoreactors

Electrochemical CO₂ reduction reaction (CO₂RR) is an attractive strategy for sustainable production of chemicals and has mainly been implemented in alkaline or neutral electrolytes. However, part of input CO₂ is consumed by the formation of carbonate under these conditions. Herein, a space-confined strategy is proposed for CO₂RR in acidic media, and Ni nanoparticles are encapsulated inside N-doped carbon nanocages as yolk-shell nanoreactors. By confining CO₂RR in the cavities of nanoreactors, a Faradaic efficiency (FE) of 93.2% for CO is achieved at pH 7.2 and 84.3% FE for CO at pH 2.5. The inhibited proton diffusion within the Nernst layer of a nanoreactor is responsible for suppression of competing hydrogen evolution in acid. Moreover, CO₂RR in an acidic flow electrolysis system offers enhanced current density and sustainable operation, in comparison with the conventional neutral pH system. This work shows that steering of mass transport via a unique structure is a viable avenue toward selective CO₂ conversion, and it provides a further understanding of the structure-performance relationship of electrocatalysts.

Constructing Schottky junctions via Pd nanosheets on DUT-67 surfaces to accelerate charge transfer

The separation, transfer and recombination of charge often affect the rate of photocatalytic reduction of CO₂. Schottky junctions can promote the rapid separation of space charge. Therefore, in this paper, Pd nanosheets were grown on the surface of DUT-67 by a hydrothermal method, and a Schottky junction was constructed between DUT-67 and Pd. Under the action of the Schottky junction, the CO yield of 0.3-Pd/DUT-67 reached 12.15 μmol/g/h, which was 17 times higher than that of DUT-67. Efficient charge transfer was demonstrated in photochemical experiments. The large specific surface area and the increased light utilization rate also contributed to the increase in the CO₂ reduction efficiency. In addition, the mechanism of Pd/DUT-67 photocatalytic reduction of CO₂ was proposed.

Metal-Organic Frameworks Derived Electrocatalysts for Oxygen and Carbon Dioxide Reduction Reaction

The increasing demands of energy and environmental concerns have motivated researchers to cultivate renewable energy resources for replacing conventional fossil fuels. The modern energy conversion and storage devices required high efficient and stable electrocatalysts to fulfil the market demands. In previous years, we are witness for considerable developments of scientific attention in Metal-organic Frameworks (MOFs) and their derived nanomaterials in electrocatalysis. In current review article, we have discussed the progress of optimistic strategies and approaches for the manufacturing of MOF-derived functional materials and their presentation as electrocatalysts for significant energy related reactions. MOFs functioning as a self-sacrificing template bid different benefits for the preparation of metal nanostructures, metal oxides and carbon-abundant materials promoting through the porous structure, organic functionalities, abundance of metal sites and large surface area. Thorough study for the recent advancement in the MOF-derived materials, metal-coordinated N-doped carbons with single-atom active sites are emerging candidates for future commercial applications. However, there are some tasks that should be addressed, to attain improved, appreciative and controlled structural parameters for catalytic and chemical behavior.

Tuning the local electronic structure of a single-site Ni catalyst by co-doping a 3D graphene framework with B/N atoms toward enhanced CO2 electroreduction

Various single metal sites supported on N-doped carbon materials have been demonstrated to be effective catalysts for CO₂ electroreduction. However, it remains a challenging task to gain comprehensive understanding on how the local electronic structures of single metal catalytic sites are rationally tuned, which eventually holds the key to significantly enhance the electrocatalytic performance. Herein, we implement B-N bonds into an N-doped 3D graphene framework by B doping to further stabilize the supported catalytic Ni single-sites and simultaneously tune their local electronic structure. Moreover, electrochemical in situ Fourier-transform infrared spectroscopy reveals that the B-N bonds can further facilitate the production of pivotal *COOH intermediates in comparison with only N doping. As a result, the Ni single-site catalyst on the B, N co-doped 3D graphene framework achieves excellent catalytic performance with a CO faradaic efficiency (FE) of 98% and a turnover frequency (TOF) value of 20.1 s^-1 at -0.8 V (vs. RHE), whereas the FE and TOF for the control sample without B doping are as low as 62% and 6.0 s^-1, respectively. This work highlights the superiority of modulating local electronic structures of single-site catalysts toward efficient electrocatalytic CO₂ reduction.

NiFe-CN catalysts derived from Solid-phase Exfoliation of NiFe-Layered Double Hydroxide for CO2 Electroreduction

The development of efficient carbon dioxide reducing reaction (CO2RR) catalysts is one of the practical solutions to environmental problems. Usually metal-doped catalysts were used for CO2RR, but the metal elements...

Facile Synthesis of Boron and Nitrogen Dual-Doped Hollow Mesoporous Carbons for Efficient Reduction of 4-Nitrophenol

The development of heteroatom-doped carbons with fascinating hierarchical porosity is of great significance for the improvement of catalytic properties of carbon catalysts. In this work, we report a boron and nitrogen codoped hollow mesoporous carbon (denoted as BN/HMC) via a simple synthesis route by direct pyrolysis of phenylboronic acid/melamine/ZIF-8 precursors. Thanks to their high specific surface area, unique hollow mesoporous nanoarchitecture, rich defects, and boron and nitrogen codoping, the obtained BN/HMC-0.05 can be employed as a high-efficiency carbon-based catalyst for the reduction of 4-nitrophenol. Theoretical calculations reveal that the B and N codoping in a carbon matrix are essential for the adsorption and activation of 4-nitrophenol. The present work might pave a new way in construction of metal-free carbon catalysts with both heteroatom doping and hierarchical porosity for various applications.

Efficient oxygen reduction electrocatalyst derived from facile Fe,N-surface treatment of carbon black

The development of nonprecious metal-based electrocatalysts for oxygen reduction reaction (ORR) is a central task in renewable electrochemical energy conversion and storage technologies. Iron-nitrogen doped carbon-based (Fe-N/C) materials are promising alternatives to Pt-based ORR electrocatalysts. Owing to large specific surface area and outstanding electrical conductivity, carbon black is an inborn support for electrocatalysts. Unfortunately, the direct incorporation of Fe-N_x moieties onto the surface of carbon black has not been realized to date. Herein, Fe-N_x moieties are directly incorporated onto the surface of carbon black through surface modification and the following Fe and N co-doping. The obtained Fe and N co-doped carbon back (Fe-N/CB) catalyst has very large specific surface area and abundant accessible Fe-N_x moieties. As a result, Fe-N/CB electrocatalyst exhibits a more positive half-wave potential (0.86 V) than Pt/C. The Fe-N/CB catalyst also displays better stability and methanol resistance than Pt/C. The Zn-air battery with Fe-N/CB as cathodic catalyst shows a maximum power density of 68 mW cm^-2 and a specific capacity of 676 mAh g_Zn^-1. Our finding provides a convenient and low-cost approach to fabricating efficient M-N/C-based catalysts and will be helpful to the development of renewable electrochemical energy conversion and storage technologies.

Synthesis and Applications of Nanostructured Hollow Transition Metal Chalcogenides

Nanostructures with well-defined structures and rich active sites occupy an important position for efficient energy storage and conversion. Recent studies have shown that a transition metal chalcogenide (TMC) has a unique structure, such as diverse structural morphology, excellent stability, high efficiency, etc., and is used in the fields of electrochemistry and catalysis. The nanohollow structure metal chalcogenide has broad application prospects due to the existence of a large number of active sites and a wide internal space, allowing a large number of ions and electrons to be transported. Summarizing synthetic strategies of nanostructured hollow transition metal sulfides (HTMC) and their applications in the field of energy storage and conversion is discussed here. Through some representative examples, the fabrication and properties of various hollow structures are analyzed, which prompt some emerging nanoengineering designs to be applied to transition metal chalcogenides. It is hoped that the construction of the HTMC will lead to a deeper understanding for the further exploration of energy storage and conversion.