Active Dual-Protein Coating Assisted by Stepwise Protein-Protein Interactions Assembly Reduces Thrombosis and Infection

Universal protein coatings have recently gained wide interest in medical applications due to their biocompatibility and ease of fabrication. However, the challenge persists in protein activity preservation, significantly complicating the functional design of these coatings. Herein, an active dual-protein surface engineering strategy assisted by a facile stepwise protein-protein interactions assembly (SPPIA) method for catheters to reduce clot formation and infection is proposed. This strategy is realized first by the partial oxidation of bovine serum albumin (BSA) and lysozyme (LZM) for creating stable nucleation platforms via hydrophobic interaction, followed by the assembly of nonoxidized BSA (pI, the isoelectric point, ≈4.7) and LZM (pI ≈11) through electrostatic interaction owing to their opposite charge under neutral conditions. The SPPIA method effectively preserves the conformation and functionality of both BSA and LZM, thus endowing the resultant coating with potent antithrombotic and bactericidal properties. Furthermore, the stable nucleation platform ensures the adhesion and durability of the coating, resisting thrombosis and bacterial proliferation even after 15 days of PBS immersion. Overall, the SPPIA approach not only provides a new strategy for the fabrication of active protein coatings but also shows promise for the surface engineering technology of catheters.

A Tough Monolithic-Integrated Triboelectric Bioplastic Enabled by Dynamic Covalent Chemistry

Electronic waste is a growing threat to the global environment and human health, raising particular concerns. Triboelectric devices synthesized from sustainable and degradable materials are a promising electronic alternative, but the mechanical mismatch at the interface between the polymer substrate and the electrodes remains unresolved in practical applications. This study uses the sulfhydryl silanization reaction and the chemical selectivity and site specificity of the thiol-disulfide exchange reaction in dynamic covalent chemistry to prepare a tough monolithic-integrated triboelectric bioplastic. The stress is dissipated by covalent bond adaptation to the interface interaction, which makes the polymer dielectric layer to the conductive layer have a good interface adhesion effect (220.55 kPa). The interfacial interlocking of the polymer substrate with the conductive layer gives the triboelectric bioplastic excellent tensile strength (87.4 MPa) and fracture toughness (33.3 MJ m-3). Even when subjected to a tension force of 10 000 times its weight, it still maintains a stable triboelectric output with no visible cracks. This study provides new insights into the design of reliable and environmentally friendly self-powered devices, which is significant for the development of flexible wearable electronics.

Protein-based bioactive coatings: from nanoarchitectonics to applications

Protein-based bioactive coatings have emerged as a versatile and promising strategy for enhancing the performance and biocompatibility of diverse biomedical materials and devices. Through surface modification, these coatings confer novel biofunctional attributes, rendering the material highly bioactive. Their widespread adoption across various domains in recent years underscores their importance. This review systematically elucidates the behavior of protein-based bioactive coatings in organisms and expounds on their underlying mechanisms. Furthermore, it highlights notable advancements in artificial synthesis methodologies and their functional applications in vitro. A focal point is the delineation of assembly strategies employed in crafting protein-based bioactive coatings, which provides a guide for their expansion and sustained implementation. Finally, the current trends, challenges, and future directions of protein-based bioactive coatings are discussed.

Zwitterionic polymers-armored amyloid-like protein surface combats thrombosis and biofouling

Proteins, cells and bacteria adhering to the surface of medical devices can lead to thrombosis and infection, resulting in significant clinical mortality. Here, we report a zwitterionic polymers-armored amyloid-like protein surface engineering strategy we called as "armored-tank" strategy for dual functionalization of medical devices. The "armored-tank" strategy is realized by decoration of partially conformational transformed LZM (PCTL) assembly through oxidant-mediated process, followed by armoring with super-hydrophilic poly-2-methacryloyloxyethyl phosphorylcholine (pMPC). The outer armor of the "armored-tank" shows potent and durable zone defense against fibrinogen, platelet and bacteria adhesion, leading to long-term antithrombogenic properties over 14 days in vivo without anticoagulation. Additionally, the "fired" PCTL from "armored-tank" actively and effectively kills both Gram-positive and Gram-negative bacterial over 30 days as a supplement to the lacking bactericidal functions of passive outer armor. Overall, this "armored-tank" surface engineering strategy serves as a promising solution for preventing biofouling and thrombotic occlusion of medical devices.

Synthesis and functionalization of scalable and versatile 2D protein films via amyloid-like aggregation

Two-dimensional (2D) protein films can be used to modify the properties of surfaces, and find applications predominantly in the fields of biomaterials, lithography, optics and electronics. However, it is difficult to produce scalable homogeneous and robust protein films with an easy, low-cost, green and efficient method. Further challenges include encapsulating and releasing functional building blocks in the film without inactivating them, and maintaining or improving the bioactivities of proteins used for the formation of the films. Here we detail the process to prepare large 2D protein films with user-defined features and structures via the amyloid-like aggregation of commonly synthesized proteins. These films can be synthesized at meter scales, have high interface adhesion, high functional expansibility and tunable functional properties, obtained by controlling the position of the disulfide bond breakage. For example, we can retain or even enhance the natural antibacterial, biomineralization and antifouling activity of proteins involved in film formation, and the properties can also be expanded through the physical blending or chemical grafting of additional functional blocks on the surface of the film. A 2D protein film can be prepared in ~3 h using four alternative coating techniques: immersion, transfer, hydrogel stamping and spraying. The characterization process of the film requires ~5 d. The procedure can be carried out by users with basic expertise in materials science.

Engineering Immunomodulatory Stents Using Zinc Ion-Lysozyme Nanoparticle Platform for Vascular Remodeling

Rapid endothelialization of cardiovascular materials can enhance the vascular remodeling performance. In this work, we developed a strategy for amyloid-like protein-assembly-mediated interfacial engineering to functionalize a biomimetic nanoparticle coating (BMC). Various groups (e.g., hydroxyl and carboxyl) on the BMC are responsible for chelating Zn2+ ions at the stent interface, similar to the glutathione peroxidase-like enzymes found in vivo. This design could reproduce the release of therapeutic nitric oxide gas (NO) and an aligned microenvironment nearly identical with that of natural vessels. In a rabbit abdominal aorta model, BMC-coated stents promoted vascular healing through rapid endothelialization and the inhibition of intimal hyperplasia in the placement sites at 4, 12, and 24 weeks. Additionally, better anticoagulant activity and immunomodulation in the BMC stents were also confirmed, and vascular healing was mainly dependent on cell signaling through the cyclic guanosine monophosphate-protein kinase G (cGMP-PKG) cascade. Overall, a metal-polypeptide-coated stent was developed on the basis of its detailed molecular mechanism of action in vascular remodeling.

Interface-mediated protein aggregation

The aggregation of proteins at interfaces has significant roles and can also lead to dysfunction of different physiological processes. The interfacial effects on the assembly and aggregation of biopolymers are not only crucial for a comprehensive understanding of protein biological functions, but also hold great potential for advancing the state-of-the-art applications of biopolymer materials. Recently, there has been remarkable progress in a collaborative context, as we strive to gain control over complex interfacial assembly structures of biopolymers. These biopolymer structures range from the nanoscale to mesoscale and even macroscale, and are attained through the rational design of interactions between biological building blocks and surfaces/interfaces. This review spotlights the recent advancements in interface-mediated assembly and properties of biopolymer materials. Initially, we introduce the solid-liquid interface (SIL)-mediated biopolymer assembly that includes the inorganic crystalline template effect and protein self-adoptive deposition through phase transition. Next, we display the advancement of biopolymer assembly instigated by the air-water interface (AWI) that acts as an energy conversion station. Lastly, we discuss succinctly the assembly of biopolymers at the liquid-liquid interface (LLI) along with their applications. It is our hope that this overview will stimulate the integration and progression of the science of interfacial assembled biopolymer materials and surfaces/interfaces.

Layer-by-layer microneedle patch with antibacterial and antioxidant dual activities for accelerating bacterial-infected wound healing

Bacterial-infected wound healing has always been a huge challenge to humans. Owing to the appearance of antibiotic resistance, there is an emergency need to design antibiotic-free wound dressings to treat such wounds. Herein, a novel antibiotic-free microneedle patch was designed, which its backing layer with antioxidant effect was coated with sodium carboxymethyl cellulose, 2-O-α-D-glucopyranosyl-L-ascorbic acid (GLAA), and 2-hydroxypropyltrimethyl ammonium chloride chitosan through electrostatic interaction based on layer-by-layer self-assembly technique, and its tips consisted of gelatin and tannic acid (TA) via hydrogen bonding interaction (CGH/GTA MN patch). The obtained CGH/GTA MN patch could effectively puncture the skin, and exhibit properties of pH-responsive TA and GLAA release. In vitro experiments showed that the obtained CGH/GTA MN patch has excellent antioxidative (scavenging DPPH efficacy is above 80 %, and scavenging ABTS efficiency reaches about 100 %), antibacterial (antibacterial rates of nearly 100 % for both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli)), biodegradable, and biocompatible properties. In the S. aureus-infected rat wounds, the CGH/GTA MN patch could efficiently accelerate infected-wound healing by eliminating S. aureus infection, inhibiting inflammation, promoting angiogenesis, and accelerating epidermal regeneration. Thus, this study will provide a promising strategy to heal bacterial-infected wounds.

Functional Microneedle Patch for Wound Healing and Biological Diagnosis and Treatment

Wound healing, especially chronic wounds, has been one of the major challenges in the field of biomedicine. Drug therapy alone is not effective, so a variety of functional wound healing dressings have been developed. Microneedles have attracted more and more attentions in the field of wound healing dressings due to their penetration and high drug delivery efficiency. In this review, all the studies on the application of microneedles in wound healing in recent years are summarized, classify different microneedles according to their functions in the process of wound healing, discuss the current challenges in the transformation of microneedle technology toward clinical applications, and finally look forward to the future design and development directions of microneedles in this field.

Amyloid-Like Assembly to Form Film at Interfaces: Structural Transformation and Application

Protein-based biomaterials are attracting broad interest for their remarkable structural and functional properties. Disturbing the native protein's three-dimensional structural stability in vitro and controlling subsequent aggregation is an effective strategy to design and construct protein-based biomaterials. One of the recent developments in regulating protein structural transformation to ordered aggregation is amyloid assembly, which generates fibril-based 1D to 3D nanostructures as functional materials. Especially, the amyloid-like assembly to form films at interfaces has been reported, which is induced by the effective reduction of the intramolecular disulfide bond. The main contribution of this amyloid-like assembly is the large-scale formation of protein films at interfaces and excellent adhesion to target substrates. This review presents the research progress of the amyloid-like assembly to form films and related applications and thereby provides a guide to exploiting protein-based biomaterials.

Reduction-responsive nucleic acid nanocarrier-mediated miR-22 inhibition of PI3K/AKT pathway for the treatment of patient-derived tumor xenograft osteosarcoma

miRNAs are important regulators of gene expression and play key roles in the development of cancer, including osteosarcoma. During the development of osteosarcoma, the expression of miR-22 is significantly downregulated, making miR-22 as a promising therapeutic target against osteosarcoma. To design and fabricate efficient delivery carriers of miR-22 into osteosarcoma cells, a hydroxyl-rich reduction-responsive cationic polymeric nanoparticle, TGIC-CA (TC), was developed in this work, which also enhanced the therapeutic effects of Volasertib on osteosarcoma. TC was prepared by the ring-opening reaction between amino and epoxy groups by one-pot method, which had the good complexing ability with nucleic acids, reduction-responsive degradability and gene transfection performance. TC/miR-22 combined with volasertib could inhibit proliferation, migration and promote apoptosis of osteosarcoma cells in vitro. The anti-tumor mechanisms were revealed as TC/miR-22 and volasertib could inhibit the PI3K/Akt signaling pathway synergistically. Furthermore, this strategy showed outstanding tumor suppression performance in animal models of orthotopic osteosarcoma, especially in patient-derived chemo-resistant and chemo-intolerant patient-derived xenograft (PDX) models, which reduced the risk of tumor lung metastasis and overcame drug resistance. Therefore, it has great potential for efficient treatment of metastasis and drug resistance of osteosarcoma by the strategy of localized, sustained delivery of miR-22 using the cationic nanocarriers combined with non-traditional chemotherapy drugs.

Thiol-Disulfide Exchange Coordinates the Release of Nitric Oxide and Dexamethasone for Synergistic Regulation of Intestinal Microenvironment in Colitis

The cell-specific functions of nitric oxide (NO) in the intestinal microenvironment orchestrate its therapeutic effects in ulcerative colitis. While most biomaterials show promise by eliciting the characteristics of NO, the insufficient storage, burst release, and pro-inflammatory side effects of NO remain as challenges. Herein, we report the development of thiol-disulfide hybrid mesoporous organosilica nanoparticles (MONs) that improve the storage and sustained release of NO, broadening the therapeutic window of NO-based therapy against colitis. The tailored NO-storing nanomaterials coordinated the release of NO and the immunoregulator dexamethasone (Dex) in the intestinal microenvironment, specifically integrating the alleviation of oxidative stress in enterocytes and the reversal of NO-exacerbated macrophage activation. Mechanistically, such a synchronous operation was achieved by a self-motivated process wherein the thiyl radicals produced by NO release cleaved the disulfide bonds to degrade the matrix and release Dex via thiol-disulfide exchange. Specifically, the MON-mediated combination of NO and Dex greatly ameliorated intractable colitis compared with 5-aminosalicylic acid, even after delayed treatment. Together, our results reveal a key contribution of synergistic modulation of the intestinal microenvironment in NO-based colitis therapy and introduce thiol-disulfide hybrid nanotherapeutics for the management of inflammatory diseases and cancer.

Mechanism of Reduced Glutathione Induced Lysozyme Defolding and Molecular Self-Assembly

The distinctive assembly behaviors of lysozyme (Lys) feature prominently in food, materials, biomedicine, and other fields and have intrigued many scholars. Although our previous work suggested that reduced glutathione (GSH) could induce lysozyme to form interfacial films at the air/water interface, the underlying mechanism is still obscure. In the present study, the effects of GSH on the disulfide bond and protein conformation of lysozyme were investigated by fluorescence spectroscopy, circular dichroism spectroscopy, and infrared spectroscopy. The findings demonstrated that GSH was able to break the disulfide bond in lysozyme molecules through the sulfhydryl/disulfide bond exchange reaction, thereby unraveling the lysozyme. The β-sheet structure of lysozyme expanded significantly, while the contents of α-helix and β-turn decreased. Furthermore, the interfacial tension and morphology analysis supported that the unfolded lysozyme tended to arrange macroscopic interfacial films at the air/water interface. It was found that pH and GSH concentrations had an impact on the aforementioned processes, with higher pH or GSH levels having a positive effect. This paper on the exploration of the mechanism of GSH-induced lysozyme interface assembly and the development of lysozyme-based green coatings has better instructive significance.

Dual functional antifouling and bactericidal proteinaceous coating

Coatings with both anti-fouling and bactericidal functions are used in many fields. In this work, lysozyme (Lyso) and poly (2-Methylallyloxyethyl phosphorylcholine) (PMPC) conjugate (Lyso-PMPC) is successfully designed and synthesized for the first time. A new nanofilm (PTL-PMPC) is then obtained by phase transition of lysozyme via the reduction of disulfide bonds in Lyso-PMPC. Benefit from lysozyme amyloid-like aggregates as surface anchors, the nanofilm shows excellent stability, it remains unchanged after treatment under extreme conditions such as ultrasonic and 3 M tape peeling. Due to the presence of zwitterionic polymer (PMPC) brush, the PTL-PMPC film has excellent antifouling properties against cell, bacterium, fungi, proteins, biofluids, phosphatide, polyose, esters, and carbohydrates. Meanwhile, the PTL-PMPC film is colourless and transparent. Further, a new coating (PTL-PMPC/PHMB) is fabricated by hybridizing PTL-PMPC with poly (hexamethylene biguanide) (PHMB). This coating had excellent antibacterial properties, and the antibacterial rate against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) is more than 99.99%. In addition, the coating exhibit good hemocompatibility and low cytotoxicity.

Dopamine-Assisted Layer-by-Layer Deposition Providing Coatings with Controlled Thickness, Roughness, and Functional Properties

In this study, dopamine-assisted deposition combined with layer-by-layer assembly was investigated as an efficient method for preparing coatings with tunable thickness, roughness, and functional properties. By this method, one can first benefit from the versatile chemistry of dopamine allowing the co-deposition of various functional materials, for example, polymers, ions, and nanoparticles, within the coating. Moreover, the layer-by-layer approach allows tuning the coating thickness and surface roughness, as well as varying the chemical composition of the coating in the vertical direction. Herein, we demonstrated the benefits of using this method in fabricating both single- and multi-component coatings.

Optimization of Lactoferrin-Derived Amyloid Coating for Enhancing Soft Tissue Seal and Antibacterial Activity of Titanium Implants

A poor seal of the titanium implant-soft tissue interface provokes bacterial invasion, aggravates inflammation, and ultimately results in implant failure. To ensure the long-term success of titanium implants, lactoferrin-derived amyloid is coated on the titanium surface to increase the expression of cell integrins and hemidesmosomes, with the goal of promoting soft tissue seal and imparting antibacterial activity to the implants. The lactoferrin-derived amyloid coated titanium structures contain a large number of amino and carboxyl groups on their surfaces, and promote proliferation and adhesion of epithelial cells and fibroblasts via the PI3K/AKT pathway. The amyloid coating also has a strong positive charge and possesses potent antibacterial activities against Staphylococcus aureus and Porphyromonas gingivalis. In a rat immediate implantation model, the amyloid-coated titanium implants form gingival junctional epithelium at the transmucosal region that resembles the junctional epithelium in natural teeth. This provides a strong soft tissue seal to wall off infection. Taken together, lactoferrin-derived amyloid is a dual-function transparent coating that promotes soft tissue seal and possesses antibacterial activity. These unique properties enable the synthesized amyloid to be used as potential biological implant coatings.

Biopolymer coating for particle surface engineering and their biomedical applications

Surface engineering of particles based on a polymeric coating is of great interest in materials design and applications. Due to the disadvantages of non-biodegradability and undesirable biocompatibility, the application of petroleum-based synthetic polymers coating in the biomedical field has been greatly limited. In addition, there is lack of a universal surface modification method to functionalize particles of different compositions, sizes, shapes, and structures. Thus, it is imperative to develop a versatile biopolymeric coating with good biocompatibility and tunable biodegradability for the preparation of functional particle materials regardless of their surface chemical and physical structures. Recently, the natural polysaccharide polymers (e.g. chitosan and cellulose), polyphenol-based biopolymers (e.g. polydopamine and tannic acid), and proteins (e.g. amyloid-like aggregates) have been utilized in surface modification of particles, and applications of these modified particles in the field of biomedicine have been also intensively exploited. In this review, the preparation of the above three coatings on particles surface are summarized, and the applications of these materials in drug loading/release, biomineralization, cell immobilization/protection, enzyme immobilization/protection, and antibacterial/antiviral are exemplified. Finally, the challenges and the future research directions on biopolymer coating for particles surface engineering are prospected.

•

This review highlights the importance of particle surface engineering in the materials field. .

•

This review summarizes biopolymer coating for particle surface engineering and their biomedical applications. .

•

This review discusses the key challenges and directions for future research and development of particle surface engineering .

Customizable bio-based coating of phase-transited lysozyme-COS for durable antibacterial and moisture management on wool fabric

Textiles with efficient moisture management provide a comfortable microenvironment for human body. However, little attention has been paid to sweat-induced bacterial growth alongside. In this study, chitooligosaccharide (COS) was used to modify lysozyme (Lyz-COS) to obtain more excellent antibacterial activity. Lyz-COS could undergo an amyloid-like aggregation by reducing its disulfide bond and hydrogen bond triggered by thiourea dioxide (TD). The Phase-Transited Lyz-COS (PTL-COS) coating increases the hydrophilicity and antibacterial properties of wool fabrics, which can withstand 50 washing cycles and 100 rubbing cycles. In addition, two methods are proposed to customize Janus wool fabrics as desired. Method 1: The PTL-COS film was prepared first, and then the film was transferred to one side of the wool fabric. Method 2: Simply spray the PTL-COS solution on one side of the wool fabric. These two processes are simple to operate and can be customized on demand, enabling single transport of sweat and inhibiting sweat-induced bacterial growth. This work underlines the significance of chitooligosaccharide-modified PTL coatings for functionalization of textile surfaces and provides new insights into the development of more adaptable and smarter textiles and clothing.

Gas Cluster Ion Beams as a Versatile Soft-Landing Tool for the Controlled Construction of Thin (Bio)Films

Surface biofunctionalization with proteins is the key to many biomedical applications. In this study, a solvent-free method for the controlled construction of protein thin films is reported. Using large argon gas cluster ion beams, proteins are sputtered from a target (a pool of pure proteins), and collected on a chosen substrate, being nearly any solid material. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) revealed the presence of intact protein molecules on the collectors. Furthermore, lowering the energy per atom in the cluster projectiles down to 1 eV/atom allowed more than 60% of bradykinin molecules to be transferred intact. This protein deposition method offers a precise control of the film thickness as the transferred protein quantity is proportional to the argon clusters ion dose reached for the transfer. This major feature enables building protein films from (sub)mono- to multilayers, without upper limitation of the thickness. A procedure was developed to measure the film thickness in situ the ToF-SIMS instrument. The versatility and potential of this soft-landing alternative for further applications is demonstrated on the one hand by building a protein thin film at the surface of paper, a substrate hardly compatible with solution-based adsorption methods. On the other hand, the possibility to achieve alternated multilayer buildup is demonstrated with the construction of a bilayer composed of bradykinin and Irganox, with the two layers well separated. These results lay the first stone toward original and complex multilayers that could previously not be considered with solution-based adsorption methods, and this regardless of the substrate nature.

Instant Adhesion of Amyloid-like Nanofilms with Wet Surfaces

The adhesion and modification of wet surfaces by an interfacial adlayer remain a key challenge in chemistry and materials science. Herein, we report a transparent and biocompatible amyloid-like nanofilm that breaks through the hydration layer of a wet surface and achieves strong adhesion with a hydrogel/tissue surface within 2 s. This process is facilitated by fast amyloid-like protein aggregation at the air/water interface and the resultant exposure of hydrophobic groups. The resultant protein nanofilm adhered to a hydrogel surface presents an adhesion strength that is 20 times higher than the maximum friction force between the upper eyelid and eyeball. In addition, the nanofilm exhibits controllable tunability to encapsulate and release functional molecules without significant activity loss. As a result, therapeutic contact lenses (CLs) could be fabricated by adhering the functionalized nanofilm (carrying drug) on the CL surface. These therapeutic CLs display excellent therapeutic efficacy, showing an increase in cyclosporin A (CsA) bioavailability of at least 82% when compared to the commercial pharmacologic treatment for dry eye syndrome. Thus, this work underlines the finding that the bioinspired amyloid-like aggregation of proteins at interfaces drives instant adhesion onto a wet surface, enabling the active loading and controllable release of functional building blocks.

Novel Arginine End-Tagging Antimicrobial Peptides to Combat Multidrug-Resistant Bacteria

The emergence of multidrug-resistant microorganisms has been termed one of the most common global health threats, emphasizing the discovery of new antibacterial agents. To address this issue, we engineered peptides harboring "RWWWR" as a central motif plus arginine (R) end-tagging and then tested them in vitro and in vivo. Our results demonstrate that Pep 6, one of the engineered peptides, shows great potential in combating Escherichia coli bacteremia and the Staphylococcus aureus skin burn infection model, which induces a 62-90% reduction in bacterial burden. Remarkably, after long serial passages of S. aureus and E. coli for 30 days, Pep 6 is still highly efficient in killing pathogens, compared with 64- and 128-fold increase in minimal inhibitory concentrations (MICs) for vancomycin and polymyxin B, respectively. We also found that Pep 6 exhibited robust biofilm-inhibiting activity and eliminated 61.33% of the mature methicillin-resistant Staphylococcus aureus (MRSA) biofilm with concentration in the MIC level. These results suggest that the RWWWR motif and binding of arginine end-tagging could be harnessed as a new agent for combating multidrug-resistant bacteria.

Mesoscale Ordering of Phycocyanin Molecules in Langmuir-Blodgett Multilayers

Phycocyanin molecules, which are part of light-harvesting complexes in cyanobacteria, can be assembled into mesoscale multilayer nanofilms by the Langmuir-Blodgett technique. Results obtained by quartz crystal microbalance and atomic force microscopy confirm the homogeneity and reproducibility of phycocyanin Langmuir-Blodgett multilayer deposition. We show by cryo-electron microdiffraction that amorphous phycocyanin Langmuir-Blodgett multilayers form, after annealing at 150 °C and cooling to room temperature, a layered nanofibrillar lattice with rotational disorder. Scanning X-ray nanodiffraction suggests that structural transformation is not homogeneous through the film but limited to patches of up to about 10 μm diameter.

Robust, Anti-biofouling 2D Nanogel Films from Poly(N-vinyl caprolactam-co-vinylimidazole) Polymers

In analogy with adsorbed protein films, we have fabricated a family of 2D nanofilms composed of poly(N-vinyl caprolactam-co-vinylimidazole) (PNVCL) nanogels. NVCL was copolymerized with 1-vinylimidazole (VIM), then cross-linked with α,ω-dibromoalkanes...

Can thiol-based redox systems be utilized as parts for synthetic biology applications?

OBJECTIVES

Synthetic biology has emerged from molecular biology and engineering approaches and aims to develop novel, biologically-inspired systems for industrial and basic research applications ranging from biocomputing to drug production. Surprisingly, redoxin (thioredoxin, glutaredoxin, peroxiredoxin) and other thiol-based redox systems have not been widely utilized in many of these synthetic biology applications.

METHODS

We reviewed thiol-based redox systems and the development of synthetic biology applications that have used thiol-dependent parts.

RESULTS

The development of circuits to facilitate cytoplasmic disulfide bonding, biocomputing and the treatment of intestinal bowel disease are amongst the applications that have used thiol-based parts. We propose that genetically encoded redox sensors, thiol-based biomaterials and intracellular hydrogen peroxide generators may also be valuable components for synthetic biology applications.

DISCUSSION

Thiol-based systems play multiple roles in cellular redox metabolism, antioxidant defense and signaling and could therefore offer a vast and diverse portfolio of components, parts and devices for synthetic biology applications. However, factors limiting the adoption of redoxin systems for synthetic biology applications include the orthogonality of thiol-based components, limitations in the methods to characterize thiol-based systems and an incomplete understanding of the design principles of these systems.

Biopolymer-Based Membrane Adsorber for Removing Contaminants from Aqueous Solution: Progress and Prospects

The demand for energy-efficient water treatment as well as the limitation in adsorption of existing membranes has motivated the pursuit of membranes that can break the selectivity-permeability trade-off and provide high selective adsorption for chemicals of interest. The membrane adsorbers have received a lot of attention for removing contaminants from aqueous solution due to combine both advantages of adsorption and membrane separation. Membrane adsorbers constructed by biopolymer with many functional groups are widely used in water purification, because the biopolymers are easily available from biomass materials in nature, degradable, and low-cost. This paper summarizes the characteristics and important development direction of these types of biomass-based membrane adsorption materials to adsorb organic/inorganic contaminants of water and analyzes the preparation methods of natural biomacromolecule cellulose, chitosan, sodium alginate, and protein to construct the membrane adsorption materials, as well as the application of pollutant removal from aqueous solutions. According to the current problems and shortcomings in the research of biopolymer-based membrane adsorbers, it is proposed to improve the understanding of the adsorption mechanism of biopolymer-based membrane adsorbers and accelerate the development of practical applications as the focus of future research.

Protein-Based Films as Antifouling and Drug-Eluting Antimicrobial Coatings for Medical Implants

Nosocomial infections, caused by bacterial contamination of medical devices and implants, are a serious healthcare concern. We demonstrate here, the use of fluorous-cured protein nanofilm coatings for generating antimicrobial surfaces. In this approach, bacteria-repelling films are created by heat-curing proteins in fluorous media. These films are then loaded with antibiotics, with release controlled via electrostatic interactions between therapeutic and protein film building blocks to provide bactericidal surfaces. This film fabrication process is additive-free, biocompatible, biodegradable, and can be used to provide antimicrobial coatings for both three-dimensional (2D) and 3D objects for use in indwelling devices.

Controlling the Structure and Function of Protein Thin Films through Amyloid-like Aggregation

Protein thin films (PTFs) with tunable structure and function can offer multiple opportunities in various fields such as surface modification, biomaterials, packaging, optics, electronics, separation, energy, and environmental science. Although nature may offer a variety of examples of high-level control of structure and function, e.g., the S layer of cells, synthetic alternatives for large-area protein-based thin films with fine control over both biological function and material structure are a key challenge, especially when aiming for facile, low-cost, green, and large-scale preparation as well as a further extension of function, such as the encapsulation and release of functional building blocks.Therefore, regarding the structure and function of PTFs, we will first briefly comment on the problems associated with PTF fabrication, and then, regarding the basis of our long-term research on protein-based thin films, we will summarize the new strategies that we have developed in recent years to explore and control the structure and function of PTFs for frontier research and practical applications.Inspired by naturally occurring protein amyloid fibrillization, we proposed the amyloid-like protein aggregation strategy to assemble proteins into supramolecular 2D films with extremely large sizes and enduring interfacial adhesion stability. This approach opened a new window for PTF fabrication in which the spontaneous interfacial 2D aggregation of protein oligomers instead of traditional 1D protofibril elongation directs the assembly of proteins. As a result, the film morphology, thickness, porosity, and function can be tailored by simply tuning the interfacial aggregation pathways.We further modified amyloid-like protein aggregation to develop chemoselective reaction-induced protein aggregation (CRIPA). It is well known that chemoselective reactions have been employed for protein modification. However, the application of such reactions in PTF fabrication has been overlooked. We initiated this new strategy by employing thiol-disulfide exchange reactions. These reactions are chemoselective toward proteins containing specific disulfide bonds with high redox potentials, resulting in amyloid-like aggregation and thin film formation. Functional proteins with immunity to such reactions can be encapsulated in thin films and released on demand without a loss of activity, opening a new avenue for the development of functional PTFs and coatings.Finally, the resultant amyloid-inspired PTFs, as a new type of biomimetic materials, provide a good platform for integration with various biomedical functions. Here, the creation of bioactive surfaces on virtually arbitrary substrates by amyloid-like PTFs will be discussed, highlighting antimicrobial, antifouling, molecular separation, and interfacial biomineralization activities that exceed those of their native protein precursors and synthetic alternatives.

Biofriendly molecular and protein release substrate with integrated piezoelectric motivation and anti-oxidative stress capabilities

Self-powered piezoelectrically active molecular or protein delivery devices have provoked great interest in recent years. However, electric fields used to promote delivery or healing may also induce the redox of water or oxygen to generate reactive oxygen species (ROS) and bring unintended oxidative pressure to the organism and harm biological functions. In addition, protein molecules are easily inactivated in the polymer reservoir matrix due to the pull of strong electrostatic effects. In this study, a multifunctional molecular delivery substrate was fabricated by integrating a piezoelectric-dielectric polymeric substrate, nanoscopic polyelectrolyte films and in-film deposited biomimetic porous CaP coating. The piezoelectric substrate promoted molecular release, and the mineralized coating effectively stored molecules or proteins and simultaneously eliminated ROS, reducing the oxidative stress response generated by oxidative pressure. The present work opens a new way for the development of multifunctional and biofriendly drug delivery devices.

One-pot surface modification of magnetic nanoparticles using phase-transitioned lysozyme for robust immobilization of enzymes

Enzymes were one-pot immobilized between Fe₃O₄ nanoparticles and a phase-transitioned lysozyme film, providing a new strategy for enzyme immobilization.

Redox responsive activity regulation in exceptionally stable supramolecular assembly and co-assembly of a protein

Supramolecular assembly of biomolecules/macromolecules stems from the desire to mimic complex biological structures and functions of living organisms. While DNA nanotechnology is already in an advanced stage, protein assembly is still in its infancy as it is a significantly difficult task due to their large molecular weight, conformational complexity and structural instability towards variation in temperature, pH or ionic strength. This article reports highly stable redox-responsive supramolecular assembly of a protein Bovine serum albumin (BSA) which is functionalized with a supramolecular structure directing unit (SSDU). The SSDU consists of a benzamide functionalized naphthalene-diimide (NDI) chromophore which is attached with the protein by a bio-reducible disulfide linker. The SSDU attached protein (NDI-BSA) exhibits spontaneous supramolecular assembly in water by off-set π-stacking among the NDI chromophores, leading to the formation of spherical nanoparticles (diameter: 150–200 nm). The same SSDU when connected with a small hydrophilic wedge (NDI-1) instead of the large globular protein, exhibits a different π-stacking mode with relatively less longitudinal displacement which results in a fibrillar network and hydrogelation. Supramolecular co-assembly of NDI-BSA and NDI-1 (3 : 7) produces similar π-stacking and an entangled 1D morphology. Both the spherical assembly of NDI-BSA or the fibrillar co-assembly of NDI-BSA + NDI-1 (3 : 7) provide sufficient thermal stability to the protein as its thermal denaturation could be completely surpassed while the secondary structure remained intact. However, the esterase like activity of the protein reduced significantly as a result of such supramolecular assembly indicating limited access by the substrate to the active site of the enzyme located in the confined environment. In the presence of glutathione (GSH), a biologically important tri-peptide, due to the cleavage of the disulfide bond, the protein became free and was released, resulting in fully regaining its enzymatic activity. Such supramolecular assembly provided excellent protection to the protein against enzymatic hydrolysis as the relative hydrolysis was estimated to be <30% for the co-assembled protein with respect to the free protein under identical conditions. Similar to bioactivity, the enzymatic hydrolysis also became prominent after GSH-treatment, confirming that the lack of hydrolysis in the supramolecularly assembled state is indeed related to the confinement of the protein in the nanostructure assembly.

Supramolecular structure directing unit regulated co-assembly of a protein produces a highly stable fibrillar nanostructure and glutathione responsive release of the protein in its active state.

Redox-Responsive Self-Assembled Nanoparticles for Cancer Therapy

Chemotherapy, combined with other treatments, is widely applied in the clinical treatment of cancer. However, deficiencies inherited from the traditional route of administration limit its successful application. With the development of nanotechnology, a series of smart nanodelivery systems have been developed to utilize the unique tumor environment (pH changes, different enzymes, and redox potential gradients) and exogenous stimuli (thermal changes, magnetic fields, and light) to improve the curative effect of anticancer drugs. In this review, endogenous and exogenous stimuli are briefly introduced. Among these stimuli, various redox-sensitive linkages are primarily described in detail, and their application with self-assembled nanoparticles is recounted. Finally, the application of redox-responsive self-assembled nanoparticles in cancer therapy is summarized.

Live cell fluorescent stain of bacterial curli and biofilm through supramolecular recognition between bromophenol blue and CsgA

Identification of curli-specific dyes for biofilm communities of microorganisms is an important task. We describe here a curli fluorescent light-up probe called bromophenol blue, which binds to curli via recognizing CsgA. This platform may provide a new perspective for the research on biofilm, amyloid disease and living materials.

Amyloid-like protein aggregates combining antifouling with antibacterial activity

A new class of biopolymer coating based on amyloid-like protein aggregates is reported to combine both antifouling and antibacterial activity.