Strategies Toward High Selectivity, Activity, and Stability of Single-Atom Catalysts

Single-atom catalysts (SACs) hold immense promise in facilitating the rational use of metal resources and achieving atomic economy due to their exceptional atom-utilization efficiency and distinct characteristics. Despite the growing interest in SACs, only limited reviews have holistically summarized their advancements centering on performance metrics. In this review, first, a thorough overview on the research progress in SACs is presented from a performance perspective and the strategies, advancements, and intriguing approaches employed to enhance the critical attributes in SACs are discussed. Subsequently, a comprehensive summary and critical analysis of the electrochemical applications of SACs are provided, with a particular focus on their efficacy in the oxygen reduction reaction , oxygen evolution reaction, hydrogen evolution reaction , CO2 reduction reaction, and N2 reduction reaction . Finally, the outline future research directions on SACs by concentrating on performance-driven investigation, where potential areas for improvement are identified and promising avenues for further study are highlighted, addressing challenges to unlock the full potential of SACs as high-performance catalysts.

Activating and Identifying the Active Site of RuS2 for Alkaline Hydrogen Oxidation Electrocatalysis

Searching for highly efficient and economical electrocatalysts for alkaline hydrogen oxidation reaction (HOR) is crucial for the development of alkaline polymer membrane fuel cells. Here, we report a valid strategy to active pyrite-type RuS2 for alkaline HOR electrocatalysis by introducing sulfur vacancies. The obtained S-vacancies modified RuS2-x exhibits outperformed HOR activity with a current density of 0.676 mA cm-2 and mass activity of 1.43 mA μg-1, which are 15-fold and 40-fold improvement than those of Ru catalyst. In situ Raman spectra demonstrate the formation of S-H bond during the HOR process, identifying the S atom of RuS2-x is the real active site for HOR catalysis. Density functional theory calculations and experimental results including in situ surface-enhanced infrared absorption spectroscopy suggest the introduction of S vacancies can rationally modify the p orbital of S atoms, leading to enhanced binding strength between the S sites and H atoms on the surface of RuS2-x, together with the promoted connectivity of hydrogen-bonding network and lowered water formation energy, contributes to the enhanced HOR performance.

Locally Ordered Single-Atom Catalysts for Electrocatalysis

Single-atom catalysts manifest nearly 100 % atom utilization efficiency, well-defined active sites, and high selectivity. However, their practical applications are hindered by a low atom loading density, uncontrollable location, and ambiguous interaction with the support, thereby posing challenges to maximizing their electrocatalytic performance. To address these limitations, the ability to arrange randomly dispersed single atoms into locally ordered single-atom catalysts (LO-SACs) substantially influences the electronic effect between reactive sites and the support, the synergistic interaction among neighboring single atoms, the bonding energy of intermediates with reactive sites and the complexity of the mechanism. As such, it dramatically promotes reaction kinetics, reduces the energy barrier of the reaction, improves the performance of the catalyst and simplifies the reaction mechanism. In this review, firstly, we introduce a variety of compelling characteristics of LO-SACs as electrocatalysts. Subsequently, the synthetic strategies, characterization methods and applications of LO-SACs in electrocatalysis are discussed. Finally, the future opportunities and challenges are elaborated to encourage further exploration in this rapidly evolving field.

Single-Atom and Dual-Atom Electrocatalysts: Synthesis and Applications

Distinguishing themselves from nanostructured catalysts, single-atom catalysts (SACs) typically consist of positively charged single metal and coordination atoms without any metal-metal bonds. Dual-atom catalysts (DACs) have emerged as extended family members of SACs in recent years. Both SACs and DACs possess characteristics that combine both homogeneous and heterogeneous catalysis, offering advantages such as uniform active sites and adjustable interactions with ligands, while also inheriting the high stability and recyclability associated with heterogeneous catalyst systems. They offer numerous advantages and are extensively utilized in the field of electrocatalysis, so they have emerged as one of the most prominent material research platforms in the direction of electrocatalysis. This review provides a comprehensive review of SACs and DACs in the field of electrocatalysis: encompassing economic production, elucidating electrocatalytic reaction pathways and associated mechanisms, uncovering structure-performance relationships, and addressing major challenges and opportunities within this domain. Our objective is to present novel ideas for developing advanced synthesis strategies, precisely controlling the microstructure of catalytic active sites, establishing accurate structure-activity relationships, unraveling potential mechanisms underlying electrocatalytic reactions, identifying more efficient reaction paths, and enhancing overall performance in electrocatalytic reactions.

Synergistically Coupled Ni/CeOx@C Electrocatalysts for the Hydrogen Evolution Reaction: Remarkable Performance to Pt/C at High Current Density

Incredibly active electrocatalysts comprising earth-abundant materials that operate as effectively as noble metal catalysts are essential for the sustainable generation of hydrogen through water splitting. However, the vast majority of active catalysts are produced via complicated synthetic processes, making scale-up considerably tricky. In this work, a facile strategy is developed to synthesize superhydrophilic Ni/CeO_x nanoparticles (NPs) integrated into porous carbon (Ni/CeO_x@C) by a simple two-step synthesis strategy as efficient hydrogen evolution reaction (HER) electrocatalysts in 1.0 M KOH. Benefiting from the electron transport induced by the heterogeneous interface between Ni and CeO_x NPs and the superhydrophilic structure of the catalyst, the resultant Ni₂Ce₁@C/500 catalysts exhibit a low overpotential of 26 and 184 mV at a current density of 10 and 300 mA cm^-2, respectively, for HER with a small Tafel slope of 62.03 mV dec^-1 and robust durability over 300 h, and its overpotential at a high current density is much better than the benchmark commercial Pt/C. Results revealed that the electronic rearrangement between Ni and CeO_x integrated into porous carbon could effectively regulate the local conductivity and charge density. In addition, the oxygen vacancies and Ni/CeO_x heterointerface promote water adsorption and hydrogen intermediate dissociation into H₂ molecules, which ultimately accelerate the HER reaction kinetics. Notably, the electrochemical results demonstrate that structural optimization by regulating synthesis temperature and metal concentration could improve the surface features contributing to high electrical conductivity and increase the number of electrochemically active sites on the Ni/CeO_x@C heterointerface, high crystal purity, and better electrical conductivity, resulting in its exceptional electrocatalytic performance toward the HER. These results indicated that the Ni/CeO_x@C electrocatalyst has the potential for practical water-splitting applications because of its controlled production strategy and outstanding Pt-like HER performance.

Replacing Oxygen Evolution with Hydrazine Borane Oxidation for Energy-Saving Electrochemical Hydrogen Production

Electrochemical water splitting is a green strategy for hydrogen (H₂) production but is severely hindered by the sluggish anodic oxygen evolution reaction (OER). Therefore, replacing the sluggish anodic OER with more favorable oxidation reactions is an energy-saving approach for hydrogen production. Hydrazine borane (HB, N₂H₄BH₃) is considered a potential hydrogen storage material due to its easy preparation, nontoxicity, and high chemical stability. Furthermore, the complete electrooxidation of HB has a unique characteristic of a much lower potential compared to that of OER. All these make it an ideal alternative for energy-saving electrochemical hydrogen production, however, which has never been reported so far. Herein, HB oxidation (HBOR)-assisted overall water splitting (OWS) is proposed for the first time for energy-saving electrochemical hydrogen production. The as-synthesized NiCoP@CoFeP nanoneedle array catalyst exhibited superefficient OER, hydrogen evolution reaction (HER), and HBOR performance. Impressively, NiCoP@CoFeP serves as both anodic and cathodic electrocatalysts for HB-assisted OWS, only requires a low cell voltage of only 0.078 V to achieve a current density of 10 mA cm^-2, which was 1.4 V lower than that for HB-free OWS, indicating the highly energy-saving H₂ production.

Tuning Active Metal Atomic Spacing by Filling of Light Atoms and Resulting Reversed Hydrogen Adsorption-Distance Relationship for Efficient Catalysis

Precisely tuning the spacing of the active centers on the atomic scale is of great significance to improve the catalytic activity and deepen the understanding of the catalytic mechanism, but still remains a challenge. Here, we develop a strategy to dilute catalytically active metal interatomic spacing (dM-M) with light atoms and discover the unusual adsorption patterns. For example, by elevating the content of boron as interstitial atoms, the atomic spacing of osmium (dOs-Os) gradually increases from 2.73 to 2.96 Å. More importantly, we find that, with the increase in dOs-Os, the hydrogen adsorption-distance relationship is reversed via downshifting d-band states, which breaks the traditional cognition, thereby optimizing the H adsorption and H2O dissociation on the electrode surface during the catalytic process; this finally leads to a nearly linear increase in hydrogen evolution reaction activity. Namely, the maximum dOs-Os of 2.96 Å presents the optimal HER activity (8 mV @ 10 mA cm-2) in alkaline media as well as suppressed O adsorption and thus promoted stability. It is believed that this novel atomic-level distance modulation strategy of catalytic sites and the reversed hydrogen adsorption-distance relationship can shew new insights for optimal design of highly efficient catalysts.

Precisely Constructed Metal Sulfides with Localized Single-Atom Rhodium for Photocatalytic C-H Activation and Direct Methanol Coupling to Ethylene Glycol

Although there are many studies on photocatalytic environmental remediation, hydrogen evolution, and chemical transformations, less success has been achieved for the synthesis of industrially important and largely demanded bulk chemicals using semiconductor photocatalysis, which holds great potential to drive unique chemical reactions that are difficult to implement by the conventional heterogeneous catalysis. The performance of semiconductors used for photochemical synthesis is, however, usually unsatisfactory due to limited efficiencies in light harvesting, charge-carrier separation, and surface reactions. The precise construction of heterogeneous photocatalysts to facilitate these processes is an attractive but challenging goal. Here, single-atom rhodium-doped metal sulfide nanorods composed of alternately stacked wurtzite/zinc-blende segments are successfully designed and fabricated, which demonstrate record-breaking efficiencies for visible light-driven preferential activation of C-H bond in methanol to form ethylene glycol (EG), a key bulk chemical used for the production of polyethylene terephthalate (PET) polymer. The wurtzite/zinc-blende heterojunctions lined regularly in one dimension accelerate the charge-carrier separation and migration. Single-atom rhodium selectively deposited onto the wurtzite segment with photogenerated holes accumulated facilitates methanol adsorption and C-H activation. The present work paves the way to harnessing photocatalysis for bulk chemical synthesis with structure-defined semiconductors.

Superaerophilic/superaerophobic cooperative electrode for efficient hydrogen evolution reaction via enhanced mass transfer

Hydrogen evolution reaction (HER), as an effective method to produce green hydrogen, is greatly impeded by inefficient mass transfer, i.e., bubble adhesion on electrode, bubble dispersion in the vicinity of electrode, and poor dissolved H₂ diffusion, which results in blocked electrocatalytic area and large H₂ concentration overpotential. Here, we report a superaerophilic/superaerophobic (SAL/SAB) cooperative electrode to efficiently promote bubble transfer by asymmetric Laplace pressure and accelerate dissolved H₂ diffusion through reducing diffusion distance. Benefiting from the enhanced mass transfer, the overpotential for the SAL/SAB cooperative electrode at -10 mA cm^-2 is only -19 mV, compared to -61 mV on the flat Pt electrode. By optimizing H₂SO₄ concentration, the SAL/SAB cooperative electrode can achieve ultrahigh current density (-1867 mA cm^-2) at an overpotential of -500 mV. We can envision that the SAL/SAB cooperative strategy is an effective method to improve HER efficiency and stimulate the understanding of various gas-involved processes.

Long-Range Interactions in Diatomic Catalysts Boosting Electrocatalysis

The simultaneous presence of two active metal centres in diatomic catalysts (DACs) leads to the occurrence of specific interactions between active sites. Such interactions, referred to as long-range interactions (LRIs), play an important role in determining the rate and selectivity of a reaction. The optimal combination of metal centres must be determined to achieve the targeted efficiency. To date, various types of DACs have been synthesised and applied in electrochemistry. However, LRIs have not been systematically summarised. Herein, the regulation, mechanism, and electrocatalytic applications of LRIs are comprehensively summarised and discussed. In addition to the basic information above, the challenges, opportunities, and future development of LRIs in DACs are proposed in order to present an overall view and reference for future research.

The Dynamic Formation from Metal-Organic Frameworks of High-Density Platinum Single-Atom Catalysts with Metal-Metal Interactions

Single-atom catalysts (SACs) hold great promise for highly efficient heterogeneous catalysis, yet the practical applications require the development of high-density active sites with flexible geometric structures. The lack of understanding in the dynamic formation process of single atoms in the host framework has been plaguing the controllable synthesis of next generation SACs. Here using Co-based metal-organic frameworks (MOFs) as a starting substrate, we fully elucidated the formation of high-density Pt single atoms with inter-site interactions in derived Co₃ O₄ host. The cation exchange process and dynamic evolution of Pt-Pt interactions, organic ligand cleavage and Pt-oxygen coordination formation during the pyrolysis process have been unambiguously interpreted by a series of in situ/ex situ spectroscopic measurements and theoretical computation. These findings would direct the synthesis of high-density SACs with metal-metal interactions, which demonstrate significantly enhanced structural flexibility and catalytic properties.

Coupling of nanocrystal hexagonal array and two-dimensional metastable substrate boosts H2-production

Designing well-ordered nanocrystal arrays with subnanometre distances can provide promising materials for future nanoscale applications. However, the fabrication of aligned arrays with controllable accuracy in the subnanometre range with conventional lithography, template or self-assembly strategies faces many challenges. Here, we report a two-dimensional layered metastable oxide, trigonal phase rhodium oxide (space group, P-3m1 (164)), which provides a platform from which to construct well-ordered face-centred cubic rhodium nanocrystal arrays in a hexagonal pattern with an intersurface distance of only 0.5 nm. The coupling of the well-ordered rhodium array and metastable substrate in this catalyst triggers and improves hydrogen spillover, enhancing the acidic hydrogen evolution for H2 production, which is essential for various clean energy-related devices. The catalyst achieves a low overpotential of only 9.8 mV at a current density of -10 mA cm-2, a low Tafel slope of 24.0 mV dec-1, and high stability under a high potential (vs. RHE) of -0.4 V (current density of ~750 mA cm-2). This work highlights the important role of metastable materials in the design of advanced materials to achieve high-performance catalysis.

Highly efficient overall urea electrolysis via single-atomically active centers on layered double hydroxide

Anodic urea oxidation reaction (UOR) is an intriguing half reaction that can replace oxygen evolution reaction (OER) and work together with hydrogen evolution reaction (HER) toward simultaneous hydrogen fuel generation and urea-rich wastewater purification; however, it remains a challenge to achieve overall urea electrolysis with high efficiency. Herein, we report a multifunctional electrocatalyst termed as Rh/NiV-LDH, through integration of nickel-vanadium layered double hydroxide (LDH) with rhodium single-atom catalyst (SAC), to achieve this goal. The electrocatalyst delivers high HER mass activity of 0.262 A mg^-1 and exceptionally high turnover frequency (TOF) of 2.125 s^-1 at an overpotential of 100 mV. Moreover, exceptional activity toward urea oxidation is addressed, which requires a potential of 1.33 V to yield 10 mA cm^-2, endorsing the potential to surmount the sluggish OER. The splendid catalytic activity is enabled by the synergy of the NiV-LDH support and the atomically dispersed Rh sites (located on the Ni-V hollow sites) as evidenced both experimentally and theoretically. The self-supported Rh/NiV-LDH catalyst serving as the anode and cathode for overall urea electrolysis (1 mol L^-1 KOH with 0.33 mol L^-1 urea as electrolyte) only requires a small voltage of 1.47 V to deliver 100 mA cm^-2 with excellent stability. This work provides important insights into multifunctional SAC design from the perspective of support sites toward overall electrolysis applications.

Isolating Single and Few Atoms for Enhanced Catalysis

Atomically dispersed metal catalysts have triggered great interest in the field of catalysis owing to their unique features. Isolated single or few metal atoms can be anchored on substrates via chemical bonding or space confinement to maximize atom utilization efficiency. The key challenge lies in precisely regulating the geometric and electronic structure of the active metal centers, thus significantly influencing the catalytic properties. Although several reviews have been published on the preparation, characterization, and application of single-atom catalysts (SACs), the comprehensive understanding of SACs, dual-atom catalysts (DACs), and atomic clusters has never been systematically summarized. Here, recent advances in the engineering of local environments of state-of-the-art SACs, DACs, and atomic clusters for enhanced catalytic performance are highlighted. Firstly, various synthesis approaches for SACs, DACs, and atomic clusters are presented. Then, special attention is focused on the elucidation of local environments in terms of electronic state and coordination structure. Furthermore, a comprehensive summary of isolated single and few atoms for the applications of thermocatalysis, electrocatalysis, and photocatalysis is provided. Finally, the potential challenges and future opportunities in this emerging field are presented. This review will pave the way to regulate the microenvironment of the active site for boosting catalytic processes.

Interface Engineering-Induced 1T-MoS2/NiS Heterostructure for Efficient Hydrogen Evolution Reaction

Metal phase molybdenum disulfide (1T-MoS2) is considered a promising electrocatalyst for the hydrogen evolution reaction (HER). In this work, an interface engineering-induced strategy is reported to prepare a 1T-MoS2/NiS heterostructure. The 1T-MoS2/NiS heterostructure exhibits an enhanced HER activity compared with that of the 1T-MoS2 in 1.0 M KOH. It achieves an overpotential of 0.12 V at a current density of 10 mA cm−2 with a Tafel slope of 69 mV dec−1. The density functional theory (DFT) calculations reveal that the interface engineering-induced 1T-MoS2/NiS heterostructure exhibits regulated electronic states of the S sites in 1T-MoS2, thus promoting the HER activity. This work demonstrates that tuning the electronic structure through interface engineering to enhance the intrinsic activity of electrocatalysts is a feasible strategy.

Atomically Dispersed MoOx on Rhodium Metallene Boosts Electrocatalyzed Alkaline Hydrogen Evolution

Accelerating slow water dissociation kinetics is key to boosting the hydrogen evolution reaction (HER) in alkaline media. We report the synthesis of atomically dispersed MoO_x species anchored on Rh metallene using a one-pot solvothermal method. The resulting structures expose the oxide-metal interfaces to the maximum extent. This leads to a MoO_x -Rh catalyst with ultrahigh alkaline HER activity. We obtained a mass activity of 2.32 A mg_Rh ^-1 at an overpotential of 50 mV, which is 11.8 times higher than that of commercial Pt/C and surpasses the previously reported Rh-based electrocatalysts. First-principles calculations demonstrate that the interface between MoO_x and Rh is the active center for alkaline HER. The MoO_x sites preferentially adsorb and dissociate water molecules, and adjacent Rh sites adsorb the generated atomic hydrogen for efficient H₂ evolution. Our findings illustrate the potential of atomic interface engineering strategies in electrocatalysis.

A Tandem Interfaced (Ni3 S2 -MoS2 )@TiO2 Composite Fabricated by Atomic Layer Deposition as Efficient HER Electrocatalyst

Reported herein is a highly active and durable hydrogen evolution reaction (HER) electrocatalyst, which is constructed following a tandem interface strategy and functional in alkaline and even neutral medium (pH ≈ 7). The ternary composite material, consisting of conductive nickel foam (NF) substrate, Ni₃ S₂ -MoS₂ heterostructure, and TiO₂ coating, is synthesized by the hydrothermal method and atomic layer deposition (ALD) technique. Representative results include: (1) versatile characterizations confirm the proposed composite structure and strong electronic interactions among comprised sulfide and oxide species; (2) the material outperforms commercial Pt/C by recording an overpotential of 115 mV and a Tafel slope of 67 mV dec^-1 under neutral conditions. A long-term stability in alkaline electrolytes up to 200 h and impressive overall water splitting behavior (1.56 V @ 10 mA cm^-2 ) are documented; (3) implementation of ALD oxide tandem layer is crucial to realize the design concept with superior HER performance by modulating a variety of heterointerface and intermediates electronic structure.

One-pot synthesis of Au-M@SiO2 (M = Rh, Pd, Ir, Pt) core-shell nanoparticles as highly efficient catalysts for the reduction of 4-nitrophenol

The conversion of p-nitrophenol (4-NP) to p-aminophenol (4-AP) is of great significance for pharmaceutical and material manufacturing. In this work, Au-M@SiO2 (M = Rh, Pd, Ir, Pt) nanoparticles (NPs) with core-shell structures, which are expected to be excellent catalysts for the transformation of 4-NP to 4-AP, were synthesized by a facile one-pot one-step method. The structure and composition of the NPs were characterized through transmission electron microscopy, X-ray powder diffraction and X-ray photoelectron spectroscopy. Au-M@SiO2 (M = Rh, Pd, Ir, Pt) core-shell NPs showed excellent catalytic activity in the reduction of 4-NP, which is superior to most catalysts reported in the previous literature. The enhanced catalytic activity of Au-M@SiO2 core-shell NPs is presumably related to the bimetallic synergistic effect. This study provides a simple strategy to synthesize core-shell bimetallic NPs for catalytic applications.

Metal-metal interactions in correlated single-atom catalysts

Single-atom catalysts (SACs) include a promising family of electrocatalysts with unique geometric structures. Beyond conventional ones with fully isolated metal sites, an emerging class of catalysts with the adjacent metal single atoms exhibiting intersite metal-metal interactions appear in recent years and can be denoted as correlated SACs (C-SACs). This type of catalysts provides more opportunities to achieve substantial structural modification and performance enhancement toward a wider range of electrocatalytic applications. On the basis of a clear identification of metal-metal interactions, this review critically examines the recent research progress in C-SACs. It shows that the control of metal-metal interactions enables regulation of atomic structure, local coordination, and electronic properties of metal single atoms, which facilitate the modulation of electrocatalytic behavior of C-SACs. Last, we outline directions for future work in the design and development of C-SACs, which is indispensable for creating high-performing new SAC architectures.

Vanadium-Incorporated CoP2 with Lattice Expansion for Highly Efficient Acidic Overall Water Splitting

A proton exchange membrane water electrolyzer (PEMWE) in acidic medium is a hopeful scenario for hydrogen production using renewable energy, but the grand challenge lies in substituting noble-metal catalysts. Herein, a robust electrocatalyst of V-CoP₂ porous nanowires arranged on a carbon cloth is successfully fabricated by incorporating vanadium into the CoP₂ lattice. Structural characterizations and theoretical analysis indicate that lattice expansion of CoP₂ caused by V incorporation results in the upshift of the d-band center, which is conducive to hydrogen adsorption for boosting the hydrogen evolution reaction (HER). Besides, V promotes surface reconstruction to generate a thicker Co₃ O₄ layer with an oxygen vacancy that enhances acid-corrosion resistance and optimizes the adsorption of water and oxygen-containing species, thus improving activity and stability toward the oxygen evolution reaction (OER). Accordingly, it presents a superior acidic overall water splitting activity (1.47 V@10 mA cm^-2 ) to Pt-C/CC||RuO₂ /CC (1.59 V@10 mA cm^-2 ), and remarkable stability. This work proposes a new route to design efficient non-noble metal electrocatalysts for PEMWE.

Plasma-assisted rhodium incorporation in nickel–iron sulfide nanosheets: enhanced catalytic activity and the Janus mechanism for overall water splitting

Rh was incorporated in Fe-doped Ni3S2 nanosheets with the assistance of hydrogen plasma to significantly enhance the HER/OER catalytic activity. The operando evolution behavior and Janus catalytic mechanism of this catalyst were further revealed.

The Underlying Molecular Mechanism of Fence Engineering to Break the Activity-stability Trade-off of Catalysts

Non-precious-metal (NPM) catalysts often face the formidable challenge of a trade-off between long-term stability and high activity, which has not yet been widely addressed. Here we propose distinct molecule-selective fence as a promising novel concept to solve this activity-stability trade-off. This unique fence has the characteristics of preventing poisonous species from invading catalysts, but allowing catalytic reaction-related species to diffuse freely. We applied this concept to construct CoS2 layer with the function of molecular selectivity on the external surface of highly active Co doped MoS2, achieving a remarkable catalytic stability towards alkaline hydrogen evolution reaction, along with a further optimized activity. In situ spectroscopy technologies uncovered the underlying molecule mechanism of the CoS2 fence for breaking the activity-stability trade-off of the MoS2 catalyst. This work offers valuable guidance for rationally designing efficient and stable NPM catalysts.

Single-Atom Engineering to Ignite 2D Transition Metal Dichalcogenide Based Catalysis: Fundamentals, Progress, and Beyond

Single-atom catalysis has been recognized as a pivotal milestone in the development history of heterogeneous catalysis by virtue of its superior catalytic performance, ultrahigh atomic utilization, and well-defined structure. Beyond single-atom protrusions, two more motifs of single-atom substitutions and single-atom vacancies along with synergistic single-atom motif assemblies have been progressively developed to enrich the single-atom family. On the other hand, besides traditional carbon material based substrates, a wide variety of 2D transitional metal dichalcogenides (TMDs) have been emerging as a promising platform for single-atom catalysis owing to their diverse elemental compositions, variable crystal structures, flexible electronic structures, and intrinsic activities toward many catalytic reactions. Such substantial expansion of both single-atom motifs and substrates provides an enriched toolbox to further optimize the geometric and electronic structures for pushing the performance limit. Concomitantly, higher requirements have been put forward for synthetic and characterization techniques with related technical bottlenecks being continuously conquered. Furthermore, this burgeoning single-atom catalyst (SAC) system has triggered serial scientific issues about their changeable single atom-2D substrate interaction, ambiguous synergistic effects of various atomic assemblies, as well as dynamic structure-performance correlations, all of which necessitate further clarification and comprehensive summary. In this context, this Review aims to summarize and critically discuss the single-atom engineering development in the whole field of 2D TMD based catalysis covering their evolution history, synthetic methodologies, characterization techniques, catalytic applications, and dynamic structure-performance correlations. In situ characterization techniques are highlighted regarding their critical roles in real-time detection of SAC reconstruction and reaction pathway evolution, thus shedding light on lifetime dynamic structure-performance correlations which lay a solid theoretical foundation for the whole catalytic field, especially for SACs.

Atomically dispersed metal catalysts on nanodiamond and its derivatives: synthesis and catalytic application

Atomically dispersed metal catalysts (ADMCs) have attracted increasing interest in the field of heterogeneous catalysis. As sub-nanometric catalysts, ADMCs have exhibited remarkable catalytic performance in many reactions. ADMCs are classified into two categories: single atom catalysts (SACs) and atomically dispersed clusters with a few atoms. To stabilize the highly active ADMCs, nanodiamond (ND) and its derivatives (NDDs) are promising supports. In this Feature Article, we have introduced the advantages of NDDs with a highly curved surface and tunable surface properties. The controllable defective sites and oxygen functional groups are known as the anchoring sites for ADMCs. Tunable surface acid-base properties enable ADMCs supported on NDDs to exhibit unique selectivity towards target products and an extended lifetime in many reactions. In addition, we have firstly overviewed the recent advances in the synthesis strategies for effectively fabricating ADMCs on NDDs, and further discussed how to achieve the atomic dispersion of metal precursors and stabilize the as-formed metal atoms against migration and agglomeration based on NDDs. And then, we have also systematically summarized the advantages of ADMCs supported on NDDs in reactions, including hydrogenation, dehydrogenation, aerobic oxidation and electrochemical reaction. These reactions can also effectively guide the design of ADMCs. The recent progress in understanding the effect of structure of active centers and metal-support interactions (MSIs) on the catalytic performance of ADMCs is particularly highlighted. At last, the possible research directions in ADMCs are forecasted.

Recent Advances on Transition Metal Dichalcogenides for Electrochemical Energy Conversion

Transition metal dichalcogenides (TMDCs) hold great promise for electrochemical energy conversion technologies in view of their unique structural features associated with the layered structure and ultrathin thickness. Because the inert basal plane accounts for the majority of a TMDC's bulk, activation of the basal plane sites is necessary to fully exploit the intrinsic potential of TMDCs. Here, recent advances on TMDCs-based hybrids/composites with greatly enhanced electrochemical activity are reviewed. After a summary of the synthesis of TMDCs with different sizes and morphologies, comprehensive in-plane activation strategies are described in detail, mainly including in-plane-modification-induced phase transformation, surface-layer modulation, and interlayer modification/coupling. Simultaneously, the underlying mechanisms for improved electrochemical activities are highlighted. Finally, the strategic evaluation on further research directions of TMDCs in-plane activation is featured. This work would shed some light on future design trends of TMDCs-based functional materials for electrochemical energy-related applications.

Atomically Structural Regulations of Carbon-Based Single-Atom Catalysts for Electrochemical CO2 Reduction

The electrochemical carbon dioxide reduction reaction (CO₂ RR) converting CO₂ into value-added chemicals and fuels to realize carbon recycling is a solution to the problem of renewable energy shortage and environmental pollution. Among all the catalysts, the carbon-based single-atom catalysts (SACs) with isolated metal atoms immobilized on conductive carbon substrates have shown significant potential toward CO₂ RR, which intrigues researchers to explore high-performance SACs for fuel and chemical production by CO₂ RR. Especially, regulating the coordination structures of the metal centers and the microenvironments of the substrates in carbon-based SACs has emerged as an effective strategy for the tailoring of their CO₂ RR catalytic performance. In this review, the current in situ/operando study techniques and the fundamental parameters for CO₂ RR performance are first briefly presented. Furthermore, the recent advances in synthetic strategies which regulate the atomic structures of the carbon-based SACs, including heteroatom coordination, coordination numbers, diatomic metal centers, and the microenvironments of substrates are summarized. In particular, the structure-performance relationship of the SACs toward CO₂ RR is highlighted. Finally, the inevitable challenges for SACs are outlined and further research directions toward CO₂ RR are presented from the perspectives.

Atomically Dispersed Pt-N3C1 Sites Enabling Efficient and Selective Electrocatalytic C-C Bond Cleavage in Lignin Models under Ambient Conditions

Selective cleavage of C-C linkages is the key and a challenge for lignin degradation to harvest value-added aromatic compounds. To this end, electrocatalytic oxidation presents a promising technique by virtue of mild reaction conditions and strong sustainability. However, the existing electrocatalysts (traditional bulk metal and metal oxides) for C-C bond oxidative cleavage suffer from poor selectivity and low product yields. We show for the first time that atomically dispersed Pt-N₃C₁ sites planted on nitrogen-doped carbon nanotubes (Pt₁/N-CNTs), constructed via a stepwise polymerization-carbonization-electrostatic adsorption strategy, are highly active and selective toward C_α-C_β bond cleavage in β-O-4 model compounds under ambient conditions. Pt₁/N-CNTs exhibits 99% substrate conversion with 81% yield of benzaldehyde, which is exceptional and unprecedented compared with previously reported electrocatalysts. Moreover, Pt₁/N-CNTs using only 0.41 wt % Pt achieved a much higher benzaldehyde yield than those of the state-of-the-art bulk Pt electrode (100 wt % Pt) and commercial Pt/C catalyst (20 wt % Pt). Systematic experimental investigation together with density functional theory (DFT) calculation suggests that the superior performance of Pt₁/N-CNTs arises from the atomically dispersed Pt-N₃C₁ sites facilitating the formation of a key C_β radical intermediate, further inducing a radical/radical cross-coupling path to break the C_α-C_β bond. This work opens up opportunities in lignin valorization via a green and sustainable electrochemical route with ultralow noble metal usage.

Engineering the Coordination Sphere of Isolated Active Sites to Explore the Intrinsic Activity in Single-Atom Catalysts

Reducing the dimensions of metallic nanoparticles to isolated, single atom has attracted considerable attention in heterogeneous catalysis, because it significantly improves atomic utilization and often leads to distinct catalytic performance. Through extensive research, it has been recognized that the local coordination environment of single atoms has an important influence on their electronic structures and catalytic behaviors. In this review, we summarize a series of representative systems of single-atom catalysts, discussing their preparation, characterization, and structure-property relationship, with an emphasis on the correlation between the coordination spheres of isolated reactive centers and their intrinsic catalytic activities. We also share our perspectives on the current challenges and future research promises in the development of single-atom catalysis. With this article, we aim to highlight the possibility of finely tuning the catalytic performances by engineering the coordination spheres of single-atom sites and provide new insights into the further development for this emerging research field.

Iron Doped in the Subsurface of CuS Nanosheets by Interionic Redox: Highly Efficient Electrocatalysts toward the Oxygen Evolution Reaction

Modifying the electronic structure of electrocatalysts by metal doping is favorable to their electrocatalytic activity. Herein, by a facile one-pot redox process of Fe(III) and Cu(I), Fe(II) was successfully doped into the subsurface of CuS nanosheets (NSs) for the first time to obtain a novel electrocatalyst (Fe_sub-CuS NSs) that possesses not only subtle lattice defects but also an atomic-level coupled nanointerface, greatly enhancing the oxygen evolution reaction (OER) performances. Meanwhile, Fe(II) and Fe(III) coexisting in Fe_sub-CuS nanosheets are favorable to OER through valence regulation. As expected, by simultaneously controlling the abovementioned three factors to optimize Fe_sub-CuS nanosheets, they display a lower overpotential of 252 mV at a current density of 20 mA cm^-2 for OER, better than 389 mV for pristine CuS nanosheets. This discovery furnishes low-cost and efficient Cu-based electrocatalysts by metal doping. Density functional theory (DFT) calculations further verify that Fe_sub-CuS(100) is thermodynamically stable and is more active for OER. This research provides a strategy for the atomic-scale engineering of nanocatalysts and also sheds light on the design of novel and efficient electrocatalysts.

Modulating electronic structure of metal-organic frameworks by introducing atomically dispersed Ru for efficient hydrogen evolution

Developing high-performance electrocatalysts toward hydrogen evolution reaction is important for clean and sustainable hydrogen energy, yet still challenging. Herein, we report a single-atom strategy to construct excellent metal-organic frameworks (MOFs) hydrogen evolution reaction electrocatalyst (NiRu0.13-BDC) by introducing atomically dispersed Ru. Significantly, the obtained NiRu0.13-BDC exhibits outstanding hydrogen evolution activity in all pH, especially with a low overpotential of 36 mV at a current density of 10 mA cm-2 in 1 M phosphate buffered saline solution, which is comparable to commercial Pt/C. X-ray absorption fine structures and the density functional theory calculations reveal that introducing Ru single-atom can modulate electronic structure of metal center in the MOF, leading to the optimization of binding strength for H2O and H*, and the enhancement of HER performance. This work establishes single-atom strategy as an efficient approach to modulate electronic structure of MOFs for catalyst design.

Rhodium single-atom catalysts with enhanced electrocatalytic hydrogen evolution performance

Rhodium (Rh) single-atom catalysts supported on activated carbon (Rh₁/AC) are prepared via a “top-down” chemical reaction-induced dispersion process and show outstanding electrocatalytic performance for the hydrogen evolution reaction.

Selective Loading of Atomic Platinum on a RuCeOx Support Enables Stable Hydrogen Evolution at High Current Densities

High-performance electrocatalysts for the hydrogen evolution reaction (HER) have an important role to play in the development of renewable energy. Platinum remains the most efficient known HER electrocatalyst. Therefore, it is necessary to find ways to maximize Pt utilization in actual practical applications. Herein we demonstrate a facile strategy for synthesizing RuCeO_x -supported, selectively loaded, atomic Pt (0.49 wt. %) (denoted Pt/RuCeO_x -PA) by photoactivation at ambient temperature and pressure. Through the photoelectron transfer at the Mott-Schottky heterojunction in RuCeO_x , Pt atoms became embedded into the RuO₂ lattice. The resulting selectively loaded Pt-O-Ru moieties in Pt/RuCeO_x -PA give a stronger hydrogen spillover effect than Pt complexes randomly loaded by either chemical activation or thermal activation. As a result, Pt/RuCeO_x -PA shows superior HER performance to the materials prepared by random loading and is even better than a commercial Pt/C catalyst with much higher Pt loading (20 wt. %) at high current densities (from 50-600 mA cm^-2 ).