Measurement of Solubilization Location in Micelles Using Anchored Aggregation‐Induced Emission Donors

Boosting Excited-State Energy Transfer by Anchoring Dipole Orientation in Binary Thermally Activated Delayed Fluorescence/J-Aggregate Assemblies

Förster resonance energy transfer (FRET) has been widely applied in fluorescence imaging, sensing and so on, while developing useful strategy of boosting FRET efficiency becomes a key issue that limits the application. Except optimizing spectral properties, promoting orientation factor (κ2) has been well discussed but rarely utilized for boosting FRET. Herein, we constructed binary nano-assembling of two thermally activated delayed fluorescence (TADF) emitters (2CzPN and DMAC-DPS) with J-type aggregate of cyanine dye (C8S4) as doping films by taking advantage of their electrostatic interactions. Time-resolved spectroscopic measurements indicated that 2CzPN/Cy-J films exhibit an order of magnitude higher kFRET than DMAC-DPS/Cy-J films. Further quantitative analysing on kFRET and kDET indicated higher orientation factor (κ2) in 2CzPN/Cy-J films play a key role for achieving fast kFRET, which was subsequently confirmed by anisotropic measurements. Corresponding DFT/TDDFT calculation revealed strong "two-point" electrostatic anchoring in 2CzPN/Cy-J films that is responsible for highly orientated transitions. We provide a new strategy for boosting FRET in nano-assemblies, which might be inspired for designing FRET-based devices of sensing, imaging and information encryption.

Micelle-based fluorogenic sensing of trypsin: a sensitive method in pancreatic disease diagnosis

Protamine-mediated micellar aggregates, featuring an AIE-based fluorescent sensor, facilitate efficient detection of trypsin activity. This method enables the detection of trypsin at exceptionally low concentrations (0.01-0.1 μg mL-1) in urine, demonstrating its potential for early clinical diagnosis of trypsin-related pancreatic diseases.

Chirality-induced supramolecular nanodishes: enantioselectivity and energy transfer

Self-assembly is one of the most important issues of fabricating materials with precise chiral nanostructures. Herein, we constructed a chiral assembly system from amphiphiles containing hydrophobic/hydrophilic chiral coils bonded to hexabiphenyl, exhibiting controllable enantioselectivity over various aggregation behaviors. The chiral coils aroused various steric hindrances affecting intrinsic stacking tendency and compactness, leading to different aggregating behaviors, as concluded from the self-assembly investigation. The strong π-π stacking interaction between the long hexabiphenyl groups gave rise to a relatively compact arrangement in the aqueous solution, whereas the methyl side groups on the coil segments raised steric hindrance at the rigid-flexible interface, resulting in loose stacking and formation of nanostructures with a larger curvature. Compared with the achiral molecule 1 that formed micron-sized large sheets, molecules 2-4 containing chiral coils aggregated into nanodishes, which looked exactly like mosquito-repellent incense, to overcome surface tension. The helical structures effectively amplified chirality and exhibited strong circular dichroism (CD) signals, which indicate enantioselectivity. In addition, the relatively loose packing behavior permitted their co-assembly with a dye and aided efficient energy transfer, providing a foundation for the chiral application of supramolecules. Thus, by introducing a simple methyl side group in amphiphilic molecules, asymmetric synthesis and energy transfer efficiency can be realized.

Quantitative Measurement of Drug Release Dynamics within Targeted Organelles Using Förster Resonance Energy Transfer

Measuring the release dynamics of drug molecules after their delivery to the target organelle is critical to improve therapeutic efficacy and reduce side effects. However, it remains challenging to quantitatively monitor subcellular drug release in real time. To address the knowledge gap, a novel gemini fluorescent surfactant capable of forming mitochondria-targeted and redox-responsive nanocarriers is designed. A quantitative Förster resonance energy transfer (FRET) platform is fabricated using this mitochondria-anchored fluorescent nanocarrier as a FRET donor and fluorescent drugs as a FRET acceptor. The FRET platform enables real-time measurement of drug release from organelle-targeted nanocarriers. Moreover, the obtained drug release dynamics can evaluate the duration of drug release at the subcellular level, which established a new quantitative method for organelle-targeted drug release. This quantitative FRET platform can compensate for the absent assessment of the targeted release performances of nanocarriers, offering in-depth understanding of the drug release behaviors at the subcellular targets.

Aggregation-induced emission-active micelles: synthesis, characterization, and applications

Aggregation-induced emission (AIE)-active micelles are a type of fluorescent functional materials that exhibit enhanced emissions in the aggregated surfactant state. They have received significant interest due to their excellent fluorescence efficiency in the aggregated state, remarkable processability, and solubility. AIE-active micelles can be designed through the self-assembly of amphipathic AIE luminogens (AIEgens) and the encapsulation of non-emissive amphipathic molecules in AIEgens. Currently, a wide range of AIE-active micelles have been constructed, with a significant increase in research interest in this area. A series of advanced techniques has been used to characterize AIE-active micelles, such as cryogenic-electron microscopy (Cryo-EM) and confocal laser scanning microscopy (CLSM). This review provides an overview of the synthesis, characterization, and applications of AIE-active micelles, especially their applications in cell and in vivo imaging, biological and organic compound sensors, anticancer drugs, gene delivery, chemotherapy, photodynamic therapy, and photocatalytic reactions, with a focus on the most recent developments. Based on the synergistic effect of micelles and AIE, it is anticipated that this review will guide the development of innovative and fascinating AIE-active micelle materials with exciting architectures and functions in the future.

Control of the stepwise self-assembly process of a pH-responsive amphiphilic 4-aminoquinoline-tetraphenylethene conjugate

Controlling the kinetic processes of self-assembly and switching their kinetic properties according to the changes in external environments are crucial concepts in the field of supramolecular polymers in water for biological and biomedical applications. Here we report a new self-assembling amphiphilic 4-aminoquinoline (4-AQ)-tetraphenylethene (TPE) conjugate that exhibits kinetically controllable stepwise self-assembly and has the ability of switching its kinetic nature in response to pH. The self-assembly process of the 4-AQ amphiphile comprises the formation of sphere-like nanoparticles, a transition to short nanofibers, and their growth to long nanofibers with ∼1 μm length scale at room temperature (RT). The timescale of the self-assembly process differs according to the pH-responsivity of the 4-AQ moiety in a weakly acidic to neutral pH range. Therefore, after aging for 24 h at RT, the 4-AQ amphiphile forms metastable short nanofibers at pH 5.5, while it forms thermodynamically favored long nanofibers at pH 7.4. Moreover, the modulation of nanofiber growth proceeding spontaneously at RT was achieved by switching the kinetic pathway through changing the pH between 7.4 and 5.5.

Insights into Self-Assembly of Nonplanar Molecules with Aggregation-Induced Emission Characteristics

Utilizing nonplanar conjugated molecules as building blocks facilitates the development of self-assembly but is fundamentally challenging. To study the self-assembly behavior, we herein demonstrate the self-assembly process of a nonplanar conjugated molecule with aggregation-induced emission (AIE) feature from an isolated molecule to an irregular cluster to a well-defined vesicle driven by amphiphiles. The superhigh aggregation-sensitive emission affords more precise and detailed information about the self-assembly process than traditional dyes. Meanwhile, the arrangements of the AIE-active molecule change from disordered to well-organized forms by reducing the twisted configuration during the transformation process, and the strong hydrophobicity of amphiphiles is crucial for such configuration and morphology transformations. Owing to the thermophilic bacteria-mimetic membranes, the obtained vesicles exhibit a property of superhigh thermal stability. They also display promising light-harvesting applications. This work not only deciphers the self-assembly of AIE molecules but also provides a strategy for nonplanar molecules to build well-organized self-assemblies.

Solvent-Modulated Chiral Self-Assembly: Selective Formation of Helical Nanotubes, Nanotwists, and Energy Transfer

As the medium for self-assembly processes, solvents strongly influence the supramolecular assemblies via specific solute-solvent interactions, which may result in effective modulation of properties, self-assembled nanostructures, and functions through varying the solvent. Here, two kinds of pyridine-cyanostilbene functionalized chiral amphiphiles (l/d-PyPhG and l-PyG) were designed, and their self-assembly behaviors in different solvents were investigated. It was found that both amphiphiles formed gels in dimethyl sulfoxide (DMSO) and self-assembled into right-handed nanotwists, while they formed suspensions in ethanol consisting of left-handed nanotubes. Although the molecular chirality in the compounds remained unchanged in the two solvents, the nanoassemblies showed opposite handedness at the nanoscale together with opposite circular dichroism (CD) and circularly polarized luminescence (CPL) signals. Furthermore, when the amphiphiles were co-assembled with an achiral dye, it was found that efficient energy transfer took place in the systems composed of nanotubes rather than those composed of nanotwists. Therefore, by assembling molecules with the same molecular chirality in different solvents, a selective formation of helical nanotubes or nanotwists and the regulation of handedness as well as energy transfer efficiency were achieved.

Recent Advances in Fluorescence Imaging of Pulmonary Fibrosis in Animal Models

Pulmonary fibrosis (PF) is a lung disease that may cause impaired gas exchange and respiratory failure while being difficult to treat. Rapid, sensitive, and accurate detection of lung tissue and cell changes is essential for the effective diagnosis and treatment of PF. Currently, the commonly-used high-resolution computed tomography (HRCT) imaging has been challenging to distinguish early PF from other pathological processes in the lung structure. Magnetic resonance imaging (MRI) using hyperpolarized gases is hampered by the higher cost to become a routine diagnostic tool. As a result, the development of new PF imaging technologies may be a promising solution. Here, we summarize and discuss recent advances in fluorescence imaging as a talented optical technique for the diagnosis and evaluation of PF, including collagen imaging, oxidative stress, inflammation, and PF-related biomarkers. The design strategies of the probes for fluorescence imaging (including multimodal imaging) of PF are briefly described, which can provide new ideas for the future PF-related imaging research. It is hoped that this review will promote the translation of fluorescence imaging into a clinically usable assay in PF.

Quantitative analysis of nine isoflavones in traditional Chinese medicines using mixed micellar liquid chromatography containing sodium dodecylsulfate/β-cyclodextrin supramolecular amphiphiles

Isoflavone is one of the phytoestrogens that have estrogenic effects, so it is usually served as an active ingredient for quality control of traditional Chinese medicines rich in isoflavones. Nine isoflavones commonly found in traditional Chinese medicines were separated in 30 min using mixed micellar liquid chromatography. The mobile phase consisted of 0.08 M sodium dodecylsulfate and 6.05 mM β-cyclodextrin:methanol (87:13, v/v) at pH 3 and eluted isocratically at 1 mL/min through a C18 column. In this study, we systematically optimized the chromatographic conditions including the pH, the composition and concentration of surfactants, the type and ratio of organic solvents, and column temperature. The method was validated according to the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use guidelines. There is no report using micellar liquid chromatography to detect isoflavones, and the optimized method has been successfully applied to quantify isoflavones in red clover and Radix Puerariae. This method is efficient, cheap, and convenient. Finally, we verified the existence of supramolecular amphiphilic vesicles in the mobile phase by transmission electron microscopy to explain the increased chromatographic efficiency.

A butterfly-shaped ESIPT molecule with solid-state fluorescence for the detection of latent fingerprints and exogenous and endogenous ONOO- by caging of the phenol donor

The latent fingerprints (LFPs) at the crime scene are unique and stable, which are considered as an important clue in criminal justice and forensic identification. Herein, a butterfly-shaped molecule DPTS with solid fluorescence plus excited-state intramolecular proton transfer (ESIPT) properties was used to develop for enhancing the visualization of the LFPs. Considering the solid fluorescence of DPTS, the color and efficiency of DPTS with a large Stokes shift (216 nm) can be tuned by changing the morphology of its aggregates, and gradually red-shifted (green-yellow-red) with increasing water content. Furthermore, its effectiveness for the detection of LFPs was demonstrated on various different substrates including paper box, tinfoil and weighting paper. The emissive fingerprint of DPTS obtained gave good fluorescence images with high contrast and resolution such as the core, delta, bifurcation, ridge termination, independent ridge and pores. Caging of the phenol donor of DPTS with a sensitive biomarker group provided DPTS-ONOO^-, which had high sensitive with detection limit of 5 nM and the quantification limit of 21 nM toward ONOO^-. Modularly derived DPTS-ONOO^- was synthesized and demonstrated specific fluorescence imaging of exogenous and endogenous peroxynitrite (ONOO^-) in living macrophage cells.

Disordered Assembly of Donors and Acceptors on Layered Double Hydroxides for High-Efficiency Chemiluminescence Resonance Energy Transfer

High-efficiency chemiluminescence (CL) resonance energy transfer (CRET) can be obtained by shortening the donor-acceptor distance and/or improving the luminescence efficiency of CRET acceptors. However, careful design and stringent experimental conditions are usually required for the ordered assembly of CRET acceptors on support materials to avoid aggregation-caused quenching problems. In this work, an aggregation-induced emission (AIE)-active fluorophore was disorderly adsorbed on the surface of layered double hydroxides (LDHs), which could exhibit high-efficiency luminescence. On the other hand, the positively charged LDHs can further adsorb peroxynitrite (ONOO^-) on the surface of LDHs. Therefore, the LDH-supported AIE fluorophore could dramatically amplify weak CL signals from ONOO^- donors as a result of ultra-high CRET efficiency by coupling the shorter donor-acceptor distance with efficient CRET acceptors. The proposed CL system has been successfully applied for the detection of NaNO₂ in the concentration range from 1.0 to 100 μM with a detection limit as low as 0.5 μM. Satisfactory recoveries (98-106%) and good accuracy were achieved for sausage samples. Our success will open new avenues for the convenient design of high-efficiency CRET systems.

The Promise of Aggregation-Induced Emission Luminogens for Detecting COVID-19

The long-term pandemic of coronavirus disease 2019 (COVID-19) requires sensitive and accurate diagnostic assays to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus and SARS-CoV-2 antibodies in infected individuals. Currently, RNA of SARS-CoV-2 virus is mainly detected by reverse transcription-polymerase chain reaction (RT-PCR)-based nucleic acid assays, while SARS-CoV-2 antigen and antibody are identified by immunological assays. Both nucleic acid assays and immunological assays rely on the luminescence signals of specific luminescence probes for qualitative and quantitative detection. The exploration of novel luminescence probes will play a crucial role in improving the detection sensitivity of the assays. As innate probes, aggregation-induced emission (AIE) luminogens (AIEgens) exhibit negligible luminescence in the free state but enhanced luminescence in the aggregated or restricted states. Moreover, AIEgen-based nanoparticles (AIE dots) offer efficient luminescence, good biocompatibility and water solubility, and superior photostability. Both AIEgens and AIE dots have been widely used for high-performance detection of biomolecules and small molecules, chemical/biological imaging, and medical therapeutics. In this review, the availability of AIEgens and AIE dots in nucleic acid assays and immunological assays are enumerated and discussed. By building a bridge between AIE materials and COVID-19, we hope to inspire researchers to use AIE materials as a powerful weapon against COVID-19.