Optimized Immobilization Strategy for Dirhodium(II) Carboxylate Catalysts for C-H Functionalization and Their Implementation in a Packed Bed Flow Reactor

Facile Recovery and Recycling of a Soluble Dirhodium Catalyst in Asymmetric Cyclopropanation via a Catalyst-in-Bag System

A catalyst-in-bag system facilitates the recovery and recycling of chiral dirhodium carboxylate catalysts used for enantioselective, intermolecular cyclopropanation. The catalyst-in-bag system incorporates a soluble enantioselective dirhodium complex catalyst within a reusable, commercial dialysis membrane. Dirhodium catalysts of different sizes are examined, and two catalysts with molecular weights above 2400 Da are well-retained by the membrane. The catalyst Rh2(S-TPPTTL)4 [TPPTTL = (1,3-dioxo-4,5,6,7-tetraphenylisoindolin-2-yl)-3,3-dimethylbutanoate] is explored in enantioselective cyclopropanation reactions under a variety of conditions. The Rh2(S-TPPTTL)4 catalyst, when contained in the catalyst-in-bag system, provides high yields and enantioselectivities, akin to the homogeneous catalyst in solution, with negligible rhodium permeation out of the bag over five catalytic cycles. The catalyst-in-bag approach facilitates recovery of the expensive rhodium metal and ligand, with only ppm level Rh detected in the reaction products. The flexible and expandable catalyst-in-bag system can be accommodated in vessels of different shapes and dimensions.

Unlocking catalytic potential: a rhodium(II)-based coordination polymer for efficient carbene transfer reactions with donor/acceptor diazoalkanes

Herein, we report the use of a molecular-defined rhodium(II) coordination polymer (Rh-CP) as a heterogeneous, recyclable catalyst in carbene transfer reactions. We showcase the application of this heterogeneous catalyst in a range of carbene transfer reactions and conclude with the functionalization of natural products and drug molecules.

Self-Supported Chiral Dirhodium Organic Frameworks Enables Efficient Asymmetric Cyclopropanation

The development of heterogeneous chiral dirhodium catalysts for fabricating important bioactive substances and reducing the loss of noble metals has long been of significant interest. However, there still remains formidable synthetic challenges since it requires multiple steps of the synthetic process, and rhodium is easily leached from solid materials during the reaction. Here, we demonstrated a self-supported strategy based on the Suzuki-Miyaura coupling reaction to construct two chiral dirhodium organic frameworks for heterogeneous asymmetric catalysis. The synthetic approach is simple and efficient since it requires only a small number of preparation steps and does not require any catalyst supporting materials. The obtained chiral dirhodium materials can be highly efficient and recyclable heterogeneous catalysts for asymmetric cyclopropanation between diazooxindole and alkenes. Importantly, Rh2-MOCP-2 exhibited almost similar catalytic performance compared to homogeneous catalyst Rh2(S-Br-NTTL)4. The afforded catalytic performance (93.9% yield with 80.9% ee) highly surpasses previous heterogeneous dirhodium catalysts reported to date.

Stereoselective Synthesis of Either Exo- or Endo-3-Azabicyclo[3.1.0]hexane-6-carboxylates by Dirhodium(II)-Catalyzed Cyclopropanation with Ethyl Diazoacetate under Low Catalyst Loadings

Although cyclopropanation with donor/acceptor carbenes can be conducted under low catalyst loadings (<0.001 mol %), such low loading has not been generally effective for other classes of carbenes such as acceptor carbenes. In this current study, we demonstrate that ethyl diazoacetate can be effectively used in the cyclopropanation of N-Boc-2,5-dihydropyrrole with dirhodium(II) catalyst loadings of 0.005 mol %. By appropriate choice of catalyst and hydrolysis conditions, either the exo- or endo-3-azabicyclo[3.1.0]hexanes can be formed cleanly with high levels of diastereoselectivity with no chromatographic purification.

Continuous-Flow Enantioselective Hydroacylations under Heterogeneous Chiral Rhodium Catalysts

Transition metal-catalyzed enantioselective C-H bond functionalizations have become efficient methods for the synthesis of complex optically active molecules. Heterogeneous catalysts for this chemistry remain largely unexplored despite the advantages they offer in terms of ease of separation and reuse of catalysts. Herein, we report the development of heterogeneous chiral Rh catalysts for continuous-flow enantioselective hydroacylations. Heterogeneous catalysts could be prepared simply by mixing supports and Rh complexes. The prepared catalysts exhibited excellent activity and enantioselectivity affording optically active ketones in quantitative yields with 99 % ee's. Under the optimized reaction conditions, a turnover number >300 was achieved without the leaching of Rh species. The catalysts exhibited a wide substrate scope and in sequential-flow reactions with other heterogeneous catalysts, the syntheses of biologically active molecules and functional materials were demonstrated.

In-situ Kinetic Studies of Rh(II)-Catalyzed C-H Functionalization to Achieve High Catalyst Turnover Numbers

Detailed kinetic studies on the functionalization of unactivated hydrocarbon sp3 C-H bonds by dirhodium-catalyzed reaction of aryldiazoacetates revealed that the C-H functionalization step is rate-determining. The efficiency of this step was increased by using the hydrocarbon as solvent and using donor/acceptor carbenes with an electron-withdrawing substituent on the aryl donor group. The optimum catalyst for these reactions is the tetraphenylphthalimido derivative Rh2(R-TPPTTL)4 and a further beneficial refinement was obtained by using N,N'-dicyclohexylcarbodiimide as an additive. Under the optimum conditions with a catalyst loading of 0.001 mol %, effective enantioselective C-H functionalization (66-97% yield, 83-97% ee) was achieved of cycloalkanes with a range of aryldiazoacetates as long as the aryldiazoacetate was not to sterically demanding. The reaction with cyclohexane using a catalyst loading of 0.0005 mol % could be recharged twice with additional aryldiazoacetate, resulting in an overall dirhodium catalyst turnover number of 580,000.

Self-Adaptive Dirhodium Complexes in a Metal-Organic Framework for Synthesis of N-H Aziridines

Conformational dynamics of active sites in enzymes enable great control over the catalytic process. Herein, we constructed a metal-organic framework with conformationally dynamic active sites (Rh₂-ZIF-8). The active sites in Rh₂-ZIF-8 were composed of the imidazolate-bridged bimetallic center with a catalytic dirhodium moiety and structural zinc site. Even though the coordination sphere of the dirhodium species was saturated with two circularly arranged esp groups and two axial 2-MeIm ligands, it could still effectively catalyze the direct synthesis of N-H aziridines from olefins with high activity. We found that such a self-adaptive catalytic process was based on the dynamic breakage and reformation of the rhodium-zinc imidazolate bridges. Interestingly, the in situ generated dirhodium site with a unique Rh₂(esp)₂(2-MeIm)₁ configuration was able to exhibit obviously enhanced selectivity compared to homogeneous catalyst Rh₂(esp)₂. Furthermore, the surrounding zinc imidazolate groups could effectively protect the dirhodium moieties from harsh environments, and this ultimately endowed it with high stability.

Recent advances in transition-metal-catalyzed carbene insertion to C-H bonds

C-H functionalization has been emerging as a powerful method to establish carbon-carbon and carbon-heteroatom bonds. Many efforts have been devoted to transition-metal-catalyzed direct transformations of C-H bonds. Metal carbenes generated in situ from transition-metal compounds and diazo or its equivalents are usually applied as the transient reactive intermediates to furnish a catalytic cycle for new C-C and C-X bond formation. Using this strategy compounds from unactivated simple alkanes to complex molecules can be further functionalized or transformed to multi-functionalized compounds. In this area, transition-metal-catalyzed carbene insertion to C-H bonds has been paid continuous attention. Diverse catalyst design strategies, synthetic methods, and potential applications have been developed. This critical review will summarize the advance in transition-metal-catalyzed carbene insertion to C-H bonds dated up to July 2021, by the categories of C-H bonds from aliphatic C(sp³)-H, aryl (aromatic) C(sp²)-H, heteroaryl (heteroaromatic) C(sp²)-H bonds, alkenyl C(sp²)-H, and alkynyl C(sp)-H, as well as asymmetric carbene insertion to C-H bonds, and more coverage will be given to the recent work. Due to the rapid development of the C-H functionalization area, future directions in this topic are also discussed. This review will give the authors an overview of carbene insertion chemistry in C-H functionalization with focus on the catalytic systems and synthetic applications in C-C bond formation.

Dirhodium(II)/Xantphos-Catalyzed Relay Carbene Insertion and Allylic Alkylation Process: Reaction Development and Mechanistic Insights

Although dirhodium-catalyzed multicomponent reactions of diazo compounds, nucleophiles and electrophiles have achieved great advance in organic synthesis, the introduction of allylic moiety as the third component via allylic metal intermediate remains a formidable challenge in this area. Herein, an attractive three-component reaction of readily accessible amines, diazo compounds, and allylic compounds enabled by a novel dirhodium(II)/Xantphos catalysis is disclosed, affording various architecturally complex and functionally diverse α-quaternary α-amino acid derivatives in good yields with high atom and step economy. Mechanistic studies indicate that the transformation is achieved through a relay dirhodium(II)-catalyzed carbene insertion and allylic alkylation process, in which the catalytic properties of dirhodium are effectively modified by the coordination with Xantphos, leading to good activity in the catalytic allylic alkylation process.

Design and characterization of novel dirhodium coordination polymers – the impact of ligand size on selectivity in asymmetric cyclopropanation

Novel dirhodium coordination polymers are synthesized and characterized by various spectroscopic techniques. The catalysts exhibit good stability and excellent catalytic performance and selectivity in the cyclopropanation of diazooxindoles.

Recyclable Ruthenium Catalyst for Distal meta-C-H Activation

We disclose the unprecedented hybrid-ruthenium catalysis for distal meta-C-H activation. The hybrid-ruthenium catalyst was recyclable, as was proven by various heterogeneity tests, and fully characterized with various microscopic and spectroscopic techniques, highlighting the physical and chemical stability. Thereby, the hybrid-ruthenium catalysis proved broadly applicable for meta-C-H alkylations of among others purine-based nucleosides and natural product conjugates. Additionally, its versatility was further reflected by meta-C-H activations through visible-light irradiation, as well as para-selective C-H activations.