Multicomponent Organic Metal Halide Hybrid with White Emissions

Rigid Phase Formation and Sb3+ Doping of Tin (IV) Halide Hybrids toward Photoluminescence Enhancement and Tuning for Anti-Counterfeiting and Information Encryption

Multi-excitonic emitting materials in luminescent metal halides are emerging candidates for anti-counterfeiting and information encryption applications. Herein, ATPP2SnCl6 (ATPP=acetonyltriphenylphosphonium) phase was designed and synthesized by rationally choosing emissive organic reagent of ATPPCl and non-toxic stable metal ions of Sn4+, and Sb3+ was further doped into ATPP2SnCl6 to tune the photoluminescence with external self-trapped excitons emission. The derived non-toxic ATPP2SnCl6 shows multi-excitonic luminescent centers verified by optical study and differential charge-density from density functional theory calculations. Incorporation of Sb3+ dopants and the increasing concentrations induce the efficient energy transfer therein, thus enhancing photoluminescence quantum yield from 5.1 % to 73.8 %. The multi-excitonic emission inspires the creation of information encryption and decryption by leveraging the photoluminescence from ATPPCl to ATPP2SnCl6 host and ATPP2SnCl6 : Sb3+. This study facilitates the anti-counterfeiting application by employing solution-processable luminescent metal halides materials with excitation-dependent PL properties.

Multisite Fine-Tuning in Hybrid Cadmium Halides Enables Wide Range Emissions for Anti-Counterfeiting

Achieving tunable emissions spanning the spectrum, from blue to near-infrared (NIR) light, within a single component is a formidable challenge with significant implication, particularly in tailoring multicolor luminescence for anti-counterfeiting purposes. In this study, we demonstrate a broad spectrum of emissions, covering blue to red and extending into NIR light in [BPy]2CdX4 : xSb3+ (BPy=Butylpyridinium; X=Cl, Br; x=0 to 0.08) through precise multisite structural fine-tuning. Notably, the multicolor emissions from [BPy]2CdBr4 : Sb3+ manifest a distinctive pattern, transitioning from blue to yellow in tandem with the host [BPy]2CdBr4 and further extending from yellow to NIR with its homologous [BPy]2CdCl4 : Sb3+, resulting in the simultaneous presence of intersecting and independent emission colors. Detailed modulation of chemical composition enables partial luminescence switching, facilitating the creation of diverse patterns with multicolor luminescence by employing [BPy]2CdX4 : xSb3+ as phosphors. This study for the first time successfully implements several groups of tunable emission colors in a single matrix via multisite fine-tuning. Such an effective strategy not only develops the specific relationships between tunable emissions and adjustable compositions, but also introduces a cost-effective and straightforward approach to achieving unique, high-level, plentiful-color and multiple-information-storage labels for advanced anti-counterfeiting applications.

Excitation-Selective and Double-Emissive Lead-Free Binary Hybrid Metal Halides for White Light-Emitting Diode and X-Ray Scintillation

Zero-dimensional (0D) organic metal halides comprising heterogeneous metal cations in single phase can achieve multiple luminous emissions enabling them toward multifunctional light-emitting applications. Herein, A novel single crystal of (C8H20N)4SbMnCl9 containing two luminescent centers of [SbCl5]2- pentahedrons and [MnCl4]2- tetrahedrons is reported. The large distance between Sb-Sb, Mn-Mn, and Sb-Mn as well as theory calculation indicate negligible interaction between individual centers, thus endowing (C8H20N)4SbMnCl9 with excitation-dependable and efficient luminescence. Under near-UV excitation, only orange emission originates from self-trapped excitons recombination in [SbCl5]2- pentahedron occurs with photoluminescence quantum yield (PLQY) of 91.5%. Under blue-light excitation, only green emission originating from 4T1-6A1 transition of Mn2+ in [MnCl4]2- tetrahedrons occurs with PLQY of 66.8%. Interestingly, upon X-ray illumination, both emissions can be fully achieved due to the high-energy photon absorption. Consequently, (C8H20N)4SbMnCl9 is employed as phosphors to fabricate white light-emitting diodes optically pumped by n-UV chip and blue-chip thanks to its excitation-dependable property. Moreover, it also shows promising performance as X-ray scintillator with low detection limit of 60.79 nGyair S-1, steady-state light yield ≈54% of commerical scintillaotr LuAG:Ce, high resolution of 13.5 lp mm-1 for X-ray imaging. This work presents a new structural design to fabricate 0D hybrids with multicolor emissions.

Revealing the Structure-Luminescence Relationship in Robust Sn(IV)-Based Metal Halides by Sb3+ Doping

Low-dimensional hybrid metal halides are an emerging class of materials with highly efficient photoluminescence (PL), but the problems of poor stability remain challenging. Sn(IV)-based metal halides show robust structure but exhibit poor PL properties, and the structure-luminescence relationship is elusive. Herein, two Sn(IV)-based metal halides (compounds 1 and 2) with the same constituent ((C6H16N2)SnCl6) but different crystal structures have been prepared, which however show poor PL properties at room temperature due to the absence of active ns2 electrons. To improve materials' PL properties, Sb3+ with active 5s2 electrons was embedded into the lattice of Sn4+-based hosts. As a result, efficient emissions were achieved for Sb3+-doped compounds 1 and 2 with a maximum PL efficiency of 14.28 and 62%, respectively. Experimental and calculation results reveal that the smaller distorted lattice structure of the host could result in the blueshift of the emission from Sb3+. Thus, a tunable color from red to orange was realized. Benefiting from the broadband efficient emission from Sb3+-doped compound 2, an efficient white light-emitting diode with a high color rendering index of up to 92.3 was fabricated to demonstrate its lighting application potential. This work promotes the understanding of the influence of robust Sn(IV)-based host lattice on the PL properties of Sb3+, advancing the development of environmentally friendly, low-cost, and high-efficiency Sn(IV)-based metal halides.

Full-Spectrum White-Light Emission from Triple Self-Trapped Excitons in Hybrid Mixed-Metal Halides

Low-dimensional metal halides with broadband emissions are expected to serve as downconversion luminescent materials for solid-state lighting (SSL). However, efficiently generating full-spectrum white-light emission with a high color-rendering index (CRI) in single-phase emitters remains a challenge. Here, we report a novel zero-dimensional (0D) hybrid mixed-metal halide (TPA)2CuAgI4 (TPA = tetrapropylammonium), in which individual [CuAgI4]2- dimers are completely isolated and surrounded by the organic cations TPA+. Cu+ and Ag+ share the same crystallographic site in [CuAgI4]2- dimers with the same statistical probability. Upon photoexcitation, single crystals exhibit a full-spectrum white-light emission with a full width at half-maximum (fwhm) of up to 314 nm and a high quantum efficiency of 46.8%. Detailed photophysical studies and theoretical calculations reveal that the ultra-broadband emission of (TPA)2CuAgI4 originates from the radiative recombination of red-, green-, and blue-emitting self-trapped excitons in [CuAgI4]2- dimers. In addition, (TPA)2CuAgI4 nanocrystals were successfully synthesized and exhibited optical properties similar to those of single-crystal counterparts. Finally, a prototype ultraviolet (UV)-pumped white-light-emitting diode (WLED) and a composite thin film employing this new white-light emitter produces a well-distributed full-spectrum white light with a high CRI of 91.4 and a warm correlated color temperature (CCT) of 4135 K, indicating the potential application of this white-light emitter in SSL. These results provide a new perspective for designing superior single-phase white-light emitters.

A 0D hybrid lead-free halide with near-unity photoluminescence quantum yield toward multifunctional optoelectronic applications

Zero-dimensional (0D) hybrid metal halides have emerged as highly efficient luminescent materials, but integrated multifunction in a structural platform remains a significant challenge. Herein, a new hybrid 0D indium halide of (Im-BDMPA)InCl6·H2O was designed as a highly efficient luminescent emitter and X-ray scintillator toward multiple optoelectronic applications. Specifically, it displays strong broadband yellow light emission with near-unity photoluminescence quantum yield (PLQY) through Sb3+ doping, acting as a down-conversion phosphor to fabricate high-performance white light emitting diodes (WLEDs). Benefiting from the high PLQY and negligible self-absorption characteristics, this halide exhibits extraordinary X-ray scintillation performance with a high light yield of 55 320 photons per MeV, which represents a new scintillator in 0D hybrid indium halides. Further combined merits of a low detection limit (0.0853 μGyair s-1), ultra-high spatial resolution of 17.25 lp per mm and negligible afterglow time (0.48 ms) demonstrate its excellent application prospects in X-ray imaging. In addition, this 0D halide also exhibits reversible luminescence off-on switching toward tribromomethane (TBM) but fails in any other organic solvents with an ultra-low detection limit of 0.1 ppm, acting as a perfect real-time fluorescent probe to detect TBM with ultrahigh sensitivity, selectivity and repeatability. Therefore, this work highlights the multiple optoelectronic applications of 0D hybrid lead-free halides in white LEDs, X-ray scintillation, fluorescence sensors, etc.

Photoluminescence and Nonlinear Optical Properties of Two Terpyridine-Based Hybrid Zn/Cd Halides

Hybrid metal halides (HMHs) with low-dimensional structures have attracted increasing attention due to their striking optical properties. Herein, two new zero-dimensional HMHs have been fabricated by CdCl2/ZnCl2 and 4'-(4-pyridyl-phenyl)-2,2':6',2″-terpyridine (Tpy), including (TpyH3)[CdCl4][Cl] (Tpy-Cd) and (TpyH3)[ZnCl4][Cl] (Tpy-Zn). Their structures are consisted of a [TpyH3]3+ organic cation, an inorganic [ZnCl4] or [CdCl4] tetrahedron, and one isolated Cl- anion. Tpy-Cd crystallizes to a noncentrosymmetric structure and possesses a moderate second harmonic response of 0.72 × KH2PO4, while Tpy-Zn features a centrosymmetric space group. Though Tpy-Cd and Tpy-Zn crystallize into space groups of completely different symmetry due to distinct connection mode and molecular distortion, they display quite similar photoluminescence of bright green light emission under ultraviolet excitation, nearly identical in Stokes shift, photoluminescence quantum yield, decay lifetime, and energy. The photoluminescence quantum yields of green light emission were measured to be nearly 25%, outperforming most of the Cd/Zn low-dimensional HMHs.

Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications

Afterglow materials are attracting widespread attention owing to their distinctive and long-lived optical emission properties which create exciting opportunities in various fields. Recent research has led to the discovery of many new afterglow materials featuring high photoluminescence quantum yields (PLQY) and lifetimes of up to several hours under ambient conditions. Afterglow materials are typically categorized according to their luminescence mechanism, such as long-persistent luminescence (LPL), room temperature phosphorescence (RTP), or thermally activated delayed fluorescence (TADF). Through rational design and novel synthetic strategies to modulate spin-orbit coupling (SOC) and populate triplet exciton states (T1), luminophores with long lifetimes and bright afterglow characteristics can be realized. Initial research towards afterglow materials focused mainly on pure inorganic materials, many of which possessed inherent disadvantages such as metal toxicity or low energy emissions. In recent years, organic-inorganic hybrid afterglow materials (OIHAMs) have been developed with high PLQY and long lifetimes. These hybrid materials exploit the tunable structure and easy processing of organic molecules, as well as enhanced SOC and intersystem crossing (ISC) processes involving heavy atom dopants, to achieve excellent afterglow performance. In this review, we begin by briefly discussing the structure and composition of inorganic and organic-inorganic hybrid afterglow materials, including strategies for regulating their lifetime, PLQY and luminescence wavelength. The specific advantages of organic-inorganic hybrid afterglow materials, including low manufacturing costs, diverse molecular/electronic structures, tunable structures and optical properties, and compatibility with a variety of substrates, are emphasized. Subsequently, we discuss in detail the fundamental mechanisms used by afterglow materials, their classification, design principles, and end applications (including sensing, anticounterfeiting, and photoelectric devices, among others). Finally, existing challenges and promising future directions are discussed, laying a platform for the design of afterglow materials for specific applications.

Flexible Crystal Heterojunctions of Low-Dimensional Organic Metal Halides Enabling Color-Tunable Space-Resolved Optical Waveguides

Molecular luminescent materials with optical waveguide have wide application prospects in light-emitting diodes, sensors, and logic gates. However, the majority of traditional optical waveguide systems are based on brittle molecular crystals, which limited the fabrication, transportation, storage, and adaptation of flexible devices under diverse application situations. To date, the design and synthesis of photofunctional materials with high flexibility, novel optical waveguide, and multi-port color-tunable emission in the same solid-state system remain an open challenge. Here, we have constructed new types of zero-dimensional organic metal halides (Au-4-dimethylaminopyridine [DMAP] and In-DMAP) with a rarely high elasticity and rather low loss coefficients for optical waveguide. Theoretical calculations on the intermolecular interactions showed that the high elasticity of 2 molecular crystalline materials was original from their herringbone structure and slip plane. Based on one-dimensional flexible microrods of 2 crystals and the 2-dimensional microplate of the Mn-DMAP, heterojunctions with multi-color and space-resolved optical waveguides have been fabricated. The formation mechanism of heterojunctions is based on the surface selective growth on account of the low lattice mismatch ratio between contacting crystal planes. Therefore, this work describes the first attempt to the design of metal-halide-based crystal heterojunctions with high flexibility and optical waveguide, expanding the prospects of traditional luminescent materials for smart optical devices, such as logic gates and multiplexers.

High Emission Efficiency and Thermal Stability in Zero-Dimensional Hybrid Zinc Halide as a Blue Light Emitter

Exploring highly efficient blue-emissive lead-free halide materials is a significant and challenging objective in the study of luminescent materials. This study reports the synthesis of a new zero-dimensional (0D) hybrid zinc halide of [CYP]ZnBr4 (CYP = 1-cyclohexylpiperazine) containing an isolated [ZnBr4]2- tetrahedron. [CYP]ZnBr4 exhibits strong blue light emission with a high photoluminescence quantum yield (PLQY) of 79.22%, surpassing all previously reported 0D zinc halide counterparts. According to the theoretical and experimental studies, the blue light emission is attributed to intrinsic self-trapped excitons resulting from strong electron-phonon coupling and structural deformation. Importantly, [CYP]ZnBr4 demonstrates excellent structural and luminescence stability toward high temperatures (180 °C) over at least half a month. High luminescence efficiency and stability enable [CYP]ZnBr4 to be an efficient blue phosphor to fabricate white light-emitting diodes (LEDs), which produces high-quality white light with a color rendering index (CRI) of 93.1 and a correlated color temperature (CCT) of 5304 K, closely resembling natural sunlight. This white LED also exhibits consistent performance and stability across different drive currents, suggesting the potential for high-power optoelectronic applications. Overall, this study paves the way for the utilization of 0D hybrid halides in advanced solid-state lighting applications.

Integrating Achiral and Chiral Organic Ligands in Zero-Dimensional Hybrid Metal Halides to Boost Circularly Polarized Luminescence

Chiral zero-dimensional hybrid metal halides (0D HMHs) could combine excellent optical properties and chirality, making them promising for circularly polarized luminescence (CPL). However, chiral 0D HMHs with efficient CPL have been rarely reported. Here, we propose an efficient strategy to achieve simultaneously high photoluminescence quantum yield (PLQY) and large dissymmetry factor (glum ), by integrating achiral and chiral ligands into 0D HMHs. Specifically, three pairs of chiral 0D hybrid indium-antimony chlorides are synthesized by combing achiral guanidine with three types of chiral methylbenzylammonium-based derivatives as the organic cations. These chiral 0D HMHs exhibit near-unity PLQY and large glum values up to around ±1×10-2 . The achiral guanidine ligand is not only essential to crystallize these hybrid indium-antimony chlorides to achieve near-unity PLQYs, but also greatly enhances the chirality induction from organic ligands to inorganic units in these 0D HMHs. Furthermore, the choice of different chiral ligands can modify the strength of hydrogen bonding interactions in these 0D HMHs, to maximize their glum values. Overall, this study provides a robust way to realize efficient CPL in chiral HMHs, expanding their applications in chiroptical fields.

Dual Monomeric Inorganic Units Constructed Bright Emissive Zero-Dimensional Antimony Chlorides with Solvent-Induced Reversible Structural Transition

A5M2X11 and A3M2X9 families (A = monovalent organic cation; M = trivalent metal; X = halogen) are receiving increasing attention because of their combination of easy solution processability and superior ferroelectricity properties. However, synthesizing highly efficient A5M2X11 and A3M2X9-type fluorophores with multiple monomeric inorganic units and achieving their structural interconversion remains challenging. Here, we report two novel zero-dimensional (0D) antimony halides, (C10H16N)5Sb2Cl11·C2H3N (1) and (C10H16N)3Sb2Cl9 (2), which not only contain two distinct [SbXn]3-n units but also have excellent orange (590 nm) and yellow-green emission (540 nm) with high PLQY of 17.7% and 31.5%, respectively. Interestingly, a reversible structural conversion could be triggered by acetonitrile steam stimulation, accompanied by luminescence switching properties. This work not only enriches the structure of hybrid Sb-based halides but also provides the possibility of well-known A5M2X11 and A3M2X9 families as structural transformation materials.

Insight into efficient photoluminescence regulation mechanism by lattice distortion and Mn2+ doping in organic-inorganic hybrid perovskites

The space configurations of organic ammonium cations play a vital role in indirectly revealing the relationship between the structures and photoluminescence properties. Structural transformation induced tunability of the photophysical properties has rarely been reported. In this work, two organic-inorganic halide perovskites with different octahedral distortions were synthesized to explore the relationships between "steric effect" of organic cations and photoluminescence properties. The broadband emission of (DETA)PbBr₅·H₂O with high octahedral distortion is attributed to self-trapped excitons and trap states, whereas smaller steric hindrance ammonium cation 1,4-butanediamine form a 2D layered perovskite with narrowband emission due to free excitons. More importantly, the photoactive metal ions Mn²⁺ doping strategy gives rise to tunable broadband light emission from weak to strong orange emission with higher PLQY up to 20.96 % and 12.90% in 0D (DETA)Pb_0.2Mn_0.8Br₅·H₂O and 2D (BDA)Pb_0.8Mn_0.2Br₄ respectively. Combined with time-correlated single photon counting and photoluminescence spectra, Mn-doped perovskites reveal energy transfer from host to Mn²⁺ characteristic energy level (⁴T₁-⁶A₁). Importantly, defect states are reduced by doping manganese ions in (DETA)PbBr₅·H₂O to enhance photoluminescence intensity. This work sheds light on the mechanism of defect-related emission and provides a successful strategy for designing novel and adjustable materials.

Facile synthesis of Sb3+-doped (Bmim)2InCl5(H2O) through a grinding method for light-emitting diodes

Organic-inorganic metal hybrid halides (OIMHs) as a new kind of photoelectric material have gained much attention in recent years because of their excellent performance in solid-state lighting applications. However, the preparation of most OIMHs is complex and requires a long preparation time in addition to the solvent providing the reaction environment. This greatly limits their further applications. Here, we synthesized zero-dimensional lead-free OIMH (Bmim)₂InCl₅(H₂O) (Bmim = 1-butyl-3-methylimidazolium) by a facile grinding method at room temperature. Through Sb³⁺ doping, Sb³⁺:(Bmim)₂InCl₅(H₂O) shows a bright broadband emission centered at 618 nm under UV excitation, which could be attributed to the self-trapped exciton (STE) emission of Sb³⁺ ions. To explore their ability in the field of solid-state lighting, a white-light-emitting diode (WLED) device based on Sb³⁺:(Bmim)₂InCl₅(H₂O) with a high color rendering index of 90 was fabricated. This work enriches In³⁺-based OIMHs and provides a new direction for the simple fabrication of OIMHs.

Regulating the coordination geometry of polyhedra in zero-dimensional metal halides for tunable emission

Although self-trapped exciton (STE) emissions in zero-dimensional metal halides have been intensively investigated, the understanding of the relationship between the coordination geometries of the metal halides and their photophysical properties is still lacking. In this work, we successfully synthesized single crystals, with strong STE emissions, of the bimetallic materials (Bmpip)₉[Pb₃Br₁₁](ZnBr₄)₂ (PbZn-Br) and (Bmpip)₉[Pb₃Br₁₁](MnBr₄)₂ (PbMn-Br), where Bmpip⁺ is 1-butyl-1-methyl-piperidinium (C₁₀H₂₂N⁺), via a facile anti-solvent crystallization strategy. With respect to the monometallic material, (Bmpip)₂[PbBr₄] (Pb-Br), the introduction of Zn²⁺ and Mn²⁺ effectively alters the coordination geometry of the lead bromide polyhedral configuration from a PbBr₄^2- tetrahedron to a Pb₃Br₁₁^5- trimer. As a result, the maximum emission peak of PbZn-Br exhibits an obvious red shift and the full width at half maximum is almost two-fold wider than that of Pb-Br due to stronger electron-phonon coupling. Moreover, due to the intrinsic emission of the Mn²⁺ ions, an intriguing tunable emission was achieved in PbMn-Br with an impressively high photoluminescence quantum yield of up to 67%. The ultra-stable PbMn-Br single crystals show potential as an ideal down-conversion phosphor for use in UV-pumped white light-emitting diode devices.

Factors influencing self-trapped exciton emission of low-dimensional metal halides

In this review, we mainly summarized the structure distortion, molecular engineering, electron–phonon coupling effect, external temperature and pressure, and metal ion doping that influence the self-trapped exciton emission of low-dimensional metal halides (LDMHs).

Ultrasensitive Optical Thermometry via Inhibiting the Energy Transfer in Zero-Dimensional Lead-Free Metal Halide Single Crystals

Self-referencing optical thermometry based on the fluorescence intensity ratio (FIR) have drawn extensive attention as a result of their high sensitivity and non-invasively fast response to temperature. However, it is a great challenge for luminescent materials to achieve simultaneously high absolute and relative temperature sensitivity based on the FIR technique. Herein, we developed a novel optical thermometer by designing hybrid lead-free metal halide (TTPhP)₂MnCl₄:Sb³⁺ (TTPhP⁺ = tetraphenylphosphonium cation) single crystals with multimodal photoluminescence (PL). The large TTPhP⁺ organic chain resulted in isolated [MnCl₄]^2- and [SbCl₅]^2- in the single crystal, which leads to a negligible energy trasfer process within them. Therefore, the two PL bands (band 1 from [MnCl₄]^2-) with a peak at 518 nm and band 2 (from [SbCl₅]²) with a peak at 640 nm exhibit different thermal-quenching effects, which resulted in excellent temperature sensitivity, with the maximum absolute and relative sensitivities reaching 0.236 K^-1 and 3.77% K^-1 in a temperature range from 300 to 400 K. Both the absolute and relative sensitivities are among the highest values for luminescence thermometry.

Organo-Metal Halide Scintillator with Weak Thermal Quenching Up to 200 °C

The prominent thermal quenching (TQ) effect of organic-inorganic metal halides limits their applications for lighting and imaging. Herein, we report an organo-metal halide scintillator (TTPhP)₂MnCl₄ (TTPhP⁺ = tetraphenylphosphonium cation), which exhibits a weak TQ effect up to 200 °C under ultraviolet-visible light (efficiency loss of 5.5%) and X-ray radiation (efficiency loss of 37%). The light yield of the (TTPhP)₂MnCl₄ scintillator (37 000 photons MeV^-1 at 200 °C) under X-ray radiation is >2 times that of the commercial scintillator LuAG:Ce (15 000 photons MeV^-1 at 200 °C). The microscopic mechanism of the weak TQ effect is demonstrated to be the scintillator having the ability to compensate for the emission losses from trapped charges and the large Mn-Mn distance (10.233 Å) suppressing nonradiative recombination at high temperatures. We further demonstrate the applications of (TTPhP)₂MnCl₄ as high-power white-light-emitting diodes operated at currents of ≤300 mA and X-ray imaging at 200 °C with a high spatial resolution.

Tailoring Photophysical Dynamics in a Hybrid Gallium-Bismuth Heterometallic Halide by Transferring from an Indirect to a Direct Band Structure

Low-dimensional lead-free metal halides have emerged as novel luminous materials for solid-state lighting, remote thermal imaging, X-ray scintillation, and anticounterfeiting labeling applications. However, the influence of band structure on the intriguing optical property has rarely been explored, especially for low-dimensional hybrid heterometallic halides. In this study, we have developed a lead-free zero-dimensional gallium-bismuth hybrid heterometallic halide, A₈(GaCl₄)₄(BiCl₆)₄ (A = C₈H₂₂N₂), that is photoluminescence (PL)-inert because of its indirect-band-gap character. Upon rational composition engineering, parity-forbidden transitions associated with the indirect band gap have been broken by replacing partial Ga³⁺ with Sb³⁺, which contains an active outer-shell 5s² lone pair, resulting in a transition from an indirect to a direct band gap. As a result, broadband yellow PL centered at 580 nm with a large Stokes shift over 200 nm is recorded. Such an emission is attributed to the radiative recombination of an allowed direct transition from triplet ³P₁ states of Sb³⁺ based on experimental characterizations and theoretical calculations. This study provides not only important insights into the effect of the band structure on the photophysical properties but a guidance for the design of new hybrid heterometallic halides for optoelectronic applications.

Corrugated 1D Hybrid Metal Halide [C6H7ClN]CdCl3 Exhibiting Broadband White-Light Emission

Organic-inorganic hybrid metal halides (OIMHs) exhibiting white-light emission are a splendid class of emitters and are regarded as desired phosphors for solid-state lighting applications. Here we report a single-component white-light-emitting hybrid metal halide, namely, [C₆H₇ClN]CdCl₃ (C₆H₇ClN = 4-(chloromethyl)pyridinium), which features a corrugated 1D anionic double chain composed of edge-shared CdCl₆ octahedrons and exhibits broadband white-light emission with a photoluminescence quantum yield of 12.3% under 365 nm UV light irradiation. Density functional theory calculations and temperature-dependent emission spectral analysis unveil that the broadband emission of [C₆H₇ClN]CdCl₃ is ascribed to self-trapped excitons. Moreover, a single-component white-light-emitting diode device with a correlated color temperature of 5214 K and color rendering index of 83.7 can be fabricated via coating [C₆H₇ClN]CdCl₃ on a 365 nm UV light-emitting diode chip. Such a promising luminescent material provides guidance for the design and synthesis of OIMHs with unique structures and desired properties.

Light/Force-Sensitive 0D Lead-Free Perovskites: From Highly Efficient Blue Afterglow to White Phosphorescence with Near-Unity Quantum Efficiency

Herein, new types of zero-dimensional (0D) perovskites (PA6InCl9 and PA4InCl7) with blue room-temperature phosphorescence (RTP) were obtained from InCl₃ and aniline hydrochloride. These are highly sensitive to external light and force stimuli. The RTP quantum yield of PA6InCl9 can be enhanced from 25.2 % to 42.8 % upon illumination. Under mechanical force, PA4InCl7 exhibits a phase transform to PA6InCl9, thus boosting ultralong RTP with a lifetime up to 1.2 s. Furthermore, white and orange pure RTP with a quantum yield close to 100 % can be realized when Sb³⁺ was introduced into PA6InCl9. The white pure phosphorescence with a color-rendering index (CRI) close to 90 consists of blue RTP of PA6InCl9 and orange RTP of Sb³⁺ . Thus, this work not only overcomes long-standing problems of low quantum yield and short lifetime of blue RTP, but also obtains high-efficiency white RTP. It provides a feasible method to realize near-unity quantum efficiency and has great application potential in the fields of optical devices and smart materials.

Antimony -doped indium-based halide single crystals enabling white-light emission

Metal halides (TMPL)3InCl6·EtOH:xSb3+ with tunable colors were obtained by gradient Sb3+ doping. Interestingly, white emission was achieved when 0.1% of Sb3+ was employed, due to a combination of the cyan emission of organic moiety and orange emission from metal halides.

Color-tunable persistent luminescence in 1D zinc–organic halide microcrystals for single-component white light and temperature-gating optical waveguides

Information security of photonic communications has become an important societal issue and can be greatly improved when photonic signals are propagated through active waveguides with tunable wavelengths in different time and space domains. Moreover, the development of active waveguides that can work efficiently at extreme temperatures is highly desirable but remains a challenge. Herein, we report new types of low-dimensional Zn(ii)–organic halide microcrystals with fluorescence and room-temperature phosphorescence (RTP) dual emission for use as 1D color-tunable active waveguides. Benefiting from strong intermolecular interactions (i.e., hydrogen bonds and π–π interactions), these robust waveguide systems exhibit colorful photonic signals and structural stability at a wide range of extreme simulated temperatures (>300 K), that covers natural conditions on Earth, Mars, and the Moon. Both experimental and theoretical studies demonstrate that the molecular self-assembly can regulate the singlet and triplet excitons to allow thermally assisted spectral separation of fluorescence and RTP, in combination with the single-component standard white-light emission. Therefore, this work demonstrates the first use of metal–organic halide microcrystals as temperature-gating active waveguides with promising implications for high-security information communications and high-resolution micro/nanophotonics.

1D zinc–organic halide microcrystals exhibiting thermally assisted spectral separation of fluorescence and phosphorescence could be used as single-component standard white-light and temperature-gating active waveguides.

Unveiling White Light Emission of a One-Dimensional Cu(I)-Based Organometallic Halide toward Single-Phase Light-Emitting Diode Applications

Luminescent organometallic halide crystals, especially with single-component white emission, are urgently needed for light-emitting diode (LED) applications. Barriers for the applications, however, lie in their lead toxicity, poor stability, and low photoluminescence quantum yield (PLQY). Here, a one-dimensional Cu(I)-based hybrid metal halide (C₁₂H₂₄O₆)CsCu₂Br₃ is designed and prepared via a simple solution method. Upon 365 nm excitation, a broad-band white light emission centered at 535 nm with a full width at half maximum of 186 nm and a PLQY of 78.3% is monitored. The experimental results together with calculation data indicate that the existence of the split peaks at 486 and 570 nm at a low temperature is attributed to the decrease of energy level degeneracy by virtue of the lattice distortion. Moreover, the stability along with the good device performance of the as-fabricated white LED was also discussed. The results demonstrate that (C₁₂H₂₄O₆)CsCu₂Br₃ is highly competitive in lighting application, and it can further enable breakthrough material design for new luminescent organometallic halides.

Decreasing Structural Dimensionality of Double Perovskites for Phase Stabilization toward Efficient X-ray Detection

Halide double perovskites have attracted substantial attention for optoelectronic applications owing to their low toxicity and high stability. However, double perovskites have strict requirements in terms of the halide type, thus rendering many of their properties unchangeable, including the band gap, atomic number, and carrier transport. By introducing long-chain organic amines, the chloride site of double perovskites can be completely replaced by bromide. Using this strategy, two dimensions silver-indium-bromide double perovskites (PEA)₄AgInBr₈ and (i-BA)₄AgInBr₈ were successfully synthesized [(PEA)⁺ = C₆H₅(CH₂)₂NH₃⁺, (i-BA)⁺ = CH(CH₃)₂CH₂NH₃⁺]. Density functional theory calculations and spectroscopy characterizations were performed to unveil the semiconducting behaviors and photoluminescence properties of the title compounds. Electrical characterization confirms their good carrier-transport property (μτ product: 2.0 × 10^-3 cm² V^-1) and low dark current. Moreover, the presence of heavy atoms, together with the ultrastable baseline contributes to a high X-ray detection sensitivity (185 μC Gy_air^-1 cm^-2), greater than that of most previous double-perovskite detectors. Our work lays the foundation for broadening the family of potential double perovskites, creating a new path for the realization of long-sought perovskites with low toxicity and high stability that retain good optoelectronic performance.

Recent Advances in All-Inorganic Zero-Dimensional Metal Halides

All-inorganic zero-dimensional (0D) metal halides are composed of isolated metal halide polyhedrons bridged by monovalent alkali metal ions. The unique structure gives rise to molecule-like electronic configuration and consequently highly attractive optical properties. In comparison with their three-dimensional (3D) counterparts, the 0D metal halides exhibit characteristic features such as broadband emission and long-term stability. In addition, 0D metal halides can be constructed from a diverse range of metal ions and permit high-level impurity doping, thereby offering great structural designability and spectral tunability. This Review surveys recent advances in 0D metal halides, including crystal preparation, luminescence modulation, and emerging applications.

Ultrafast Study of Exciton Transfer in Sb(III)-Doped Two-Dimensional [NH3(CH2)4NH3]CdBr4 Perovskite

Antimony-based metal halide hybrids have attracted enormous attention due to the stereoactive 5s² electron pair that drives intense triplet broadband emission. However, energy/charge transfer has been rarely achieved for Sb³⁺-doped materials. Herein, Sb³⁺ ions are homogeneously doped into 2D [NH₃(CH₂)₄NH₃]CdBr₄ perovskite (Cd-PVK) using a wet-chemical method. Compared to the weak singlet exciton emission of Cd-PVK at 380 nm, 0.01% Sb³⁺-doped Cd-PVK exhibits intense triplet emission located at 640 nm with a near-unity quantum yield. Further increasing the doping concentration of Sb³⁺ completely quenches singlet exciton emission of Cd-PVK, concurrently with enhanced Sb³⁺ triplet emission. Delayed luminescence and femtosecond-transient absorption studies suggest that Sb³⁺ emission originates from exciton transfer (ET) from Cd-PVK host to Sb³⁺ dopant, while such ET cannot occur with Pb²⁺-doped Cd-PVK because of the mismatch of energy levels. In addition, density function theory calculations indicate that the introduced Sb³⁺ likely replace the Cd²⁺ ions along with the deprotonation of butanediammonium for charge balance, instead of generating Cd²⁺ vacancies. This work provides a deeper understanding of the ET of Sb³⁺-doped Cd-PVK and suggests an effective strategy to achieve efficient triplet Sb³⁺ emission beyond 0D Cl-based hybrids.

Indium-antimony-halide single crystals for high-efficiency white-light emission and anti-counterfeiting

Although single-source white emissive perovskite has emerged as a class of encouraging light-emitting material, the synthesis of lead-free halide perovskite materials with high luminous efficiency is still challenging. Here, we report a series of zero-dimensional indium-antimony (In/Sb) alloyed halide single crystals, BAPPIn_2-2x Sb_2x Cl₁₀ (BAPP = C₁₀H₂₈N₄, x = 0 to 1), with tunable emission. In BAPPIn_1.996Sb_0.004Cl₁₀, bright yellow emission with near 100% photoluminescence quantum yield (PLQY) is yielded when it was excited at 320 nm, which turns into bright white-light emission with a PLQY of 44.0% when excited at 365 nm. Combined spectroscopy and theoretical studies reveal that the BAPP⁴⁺-associated blue emission and inorganic polyhedron-afforded orange emission function as a perfect pair of complementary colors affording white light in BAPPIn_1.996Sb_0.004Cl₁₀ Moreover, the interesting afterglow behavior, together with excitation-dependent emission property, makes BAPPIn_2-2x Sb_2x Cl₁₀ as high-performance anti-counterfeiting/information storage materials.

Phase Engineering of Cesium Manganese Bromides Nanocrystals with Color-Tunable Emission

For display applications, it is highly desirable to obtain tunable red/green/blue emission. However, lead-free perovskite nanocrystals (NCs) generally exhibit broadband emission with poor color purity. Herein, we developed a unique phase transition strategy to engineer the emission color of lead-free cesium manganese bromides NCs and we can achieve a tunable red/green/blue emission with high color purity in these NCs. Such phase transition can be triggered by isopropanol: from one dimensional (1D) CsMnBr₃ NCs (red-color emission) to zero dimensional (0D) Cs₃ MnBr₅ NCs (green-color emission). Furthermore, in a humid environment both 1D CsMnBr₃ NCs and 0D Cs₃ MnBr₅ NCs can be transformed into 0D Cs₂ MnBr₄ ⋅2 H₂ O NCs (blue-color emission). Cs₂ MnBr₄ ⋅2 H₂ O NCs could inversely transform into the mixture of CsMnBr₃ and Cs₃ MnBr₅ phase during the thermal annealing dehydration step. Our work highlights the tunable optical properties in single component NCs via phase engineering and provides a new avenue for future endeavors in light-emitting devices.

Efficiency-Tunable Single-Component White-Light Emission Realized in Hybrid Halides Through Metal Co-Occupation

Organic-inorganic hybrid metal halides have attracted widespread attention as emerging optoelectronic materials, especially in solid-state lighting, where they can be used as single-component white-light phosphors for white light-emitting diodes. Herein, we have successfully synthesized a zero-dimensional (0D) organic-inorganic hybrid mixed-metal halide (Bmpip)2PbxSn1-xBr4 (0 < x < 1, Bmpip+ = 1-butyl-1-methyl-piperidinium, C10H22N+) that crystallizes in a monoclinic system in the C2/c space group. Pb2+ and Sn2+ form a four-coordinate seesaw structure separated by organic cations forming a 0D structure. For different excitation wavelengths, (Bmpip)2PbxSn1-xBr4 (0 < x < 1) exhibits double-peaked emission at 470 and 670 nm. The emission color of (Bmpip)2PbxSn1-xBr4 can be easily tuned from orange-red to blue by adjusting the Pb/Sn molar ratio or excitation wavelength. Representatively, (Bmpip)2Pb0.16Sn0.84Br4 exhibits approximately white-light emission with high photoluminescence quantum yield up to 39%. Interestingly, the color of (Bmpip)2PbxSn1-xBr4 can also be easily tuned by temperature, promising its potential for application in temperature measurement and indication. Phosphor-converted light-emitting diodes are fabricated by combining (Bmpip)2PbxSn1-xBr4 and 365 nm near-UV LED chips and exhibit high-quality light output.

Low-Dimensional Organic Metal Halide Hybrids with Excitation-Dependent Optical Waveguides from Visible to Near-Infrared Emission

Molecular luminescent materials with optical waveguide properties have wide application prospects in the fields of sensors, filters, and modulators. However, designing and synthesizing optical waveguide materials with unique morphology, high emissive efficiency, and tunable optical properties in the same solid-state system remains an open challenge. In this work, we report new types of morphological one-dimensional (1D) organic metal halide hybrid micro/nanotubes and micro/nanorods, which exhibit excitation-dependent optical waveguide properties from visible to near-infrared (NIR) regions with low-loss coefficient and high emissive efficiency during the propagation process. Strong intermolecular interactions within the hybrid systems could effectively reduce the nonradiative transition and improve quantum efficiency. Photophysical studies and theoretical calculations demonstrate that the color-tunable emission can be attributed to the coexistence of locally excited states and charge-transfer states. Utilizing excitation-dependent optical waveguide emission ranging from visible to NIR regions, we fabricate an optical wavelength converter to transfer short-wavelength into long-wavelength emission with multichannels. Furthermore, an optical logic gate system was designed based on the tunable emission properties of the 1D metal halide micro/nanotubes. Therefore, this work provides not only a facile process to synthesize 1D organic metal halide hybrids with excitation-dependent optical waveguide properties but also a new way to advance photofunctional logic computation at the micro/nanoscale.

Reversible Luminescent Vapochromism of a Zero-Dimensional Sb3+-Doped Organic-Inorganic Hybrid

Photoactive metal ions doping is an efficient way to modulate the photophysical properties of perovskite. Herein, we report a zero-dimensional (0D) InCl₆(C₄H₁₀SN)₄·Cl:Sb³⁺ by doping Sb³⁺ into InCl₆(C₄H₁₀SN)₄·Cl, which undergoes a significant enhancement of the emission peak at 550 nm with photoluminescence quantum yield boosting from 20% to 90%. Interestingly, a red-shifted emission is observed on InCl₆(C₄H₁₀SN)₄·Cl:Sb³⁺ upon exposure to ethanol and DMF vapor with the emission peak red-shifted from 550 to 580 and 600 nm, respectively. Furthermore, the transformation is reversed after drying the vapor-exposed InCl₆(C₄H₁₀SN)₄·Cl:Sb³⁺ at ambient conditions. Detailed characterizations reveal that the crystal packing and structure distortion account for the reversible luminescent vapochromism. Thanks to the superior stability and feasible transformation of InCl₆(C₄H₁₀SN)₄·Cl:Sb³⁺ at ambient conditions, a DMF sensor was fabricated by coating the mixture of InCl₆(C₄H₁₀SN)₄·Cl:Sb³⁺ and PMMA into patterned substrate, which exhibits an obvious luminescent change upon release and uptake of DMF and excellent stability and producibility in several cycles.

Co-luminescence in a zero-dimensional organic-inorganic hybrid antimony halide with multiple coordination units

Zero-dimensional (0D) organic-inorganic hybrid metal halides (OIMHs) containing multiple halometallate species (HMSs) have received extensive attention due to their capability to achieve multifunctional photophysical characteristics. Herein we report a lead-free 0D-OIMH compound, namely [Emim]8[SbCl6]2[SbCl5] (1, Emim = 1-ethyl-3-methylimidazolium), which is the first crystal containing two distinct mononuclear [SbXn]3-n units in one single structure. The optical absorption, temperature/excitation-variable photoluminescence (PL) and PL decay were studied. 1 exhibits a broad emission centered at 577 nm, which is analyzed to be a combination of the emissions from [SbCl6]3- and [SbCl5]2-. The structural effects including SbSb distances and polyhedral distortion of [SbXn]3-n on the PL of antimony-based 0D-OIMHs are discussed in detail. This work would provide guidance for constructing Sb-based 0D OIMHs composed of multiple halometallate species.

Multicolor Output from 2D Hybrid Perovskites with Wide Band Gap: Highly Efficient White Emission, Dual-Color Afterglow, and Switch between Fluorescence and Phosphorescence

Herein, an organic fluorophore termed NLAC is introduced into 2D hybrid perovskites with wide band gap (>3.54 eV) to give a green emission with quantum yield up to 81%. The highly efficient luminescence is ascribed to avoiding the aggregation of NLAC and formation of an inorganic free exciton which is easy to thermally quench. On this basis, a new strategy to generate efficient white emission with afterglow has been proposed by codoping a short-wavelength fluorophore and long-wavelength phosphor into 2D organic-inorganic hybrid perovskites (OIHPs). As a result, a single-component white-light-emitting material PEPC-3N based on NLAC with CIE of (0.33, 0.36) and quantum yield up to 43% can be obtained. Interestingly, PEPC-3N shows a dual-color organic afterglow and excitation-wavelength-dependent emission, consequently forming a switch between green fluorescence and yellow afterglow. This unique performance indicates PEPC-3N has huge potential in afterglow WLEDs and information storage.

Recent progress of zero-dimensional luminescent metal halides

This review provides in-depth insight into the structure–luminescence–application relationship of 0D all-inorganic/organic–inorganic hybrid metal halide luminescent materials.