Chemistry Evolves, Terms Evolve, but Phenomena Do Not Evolve: From Chalcogen-Chalcogen Interactions to Chalcogen Bonding

Isothiourea-Catalysed Acylative Dynamic Kinetic Resolution of Tetra-substituted Morpholinone and Benzoxazinone Lactols

The development of methods to allow the selective acylative dynamic kinetic resolution (DKR) of tetra-substituted lactols is a recognised synthetic challenge. In this manuscript, a highly enantioselective isothiourea-catalysed acylative DKR of tetra-substituted morpholinone and benzoxazinone-derived lactols is reported. The scope and limitations of this methodology have been developed, with high enantioselectivity and good to excellent yields (up to 89 %, 99 : 1 er) observed across a broad range of substrate derivatives incorporating substitution at N(4) and C(2), di- and spirocyclic substitution at C(5) and C(6), as well as benzannulation (>35 examples in total). The DKR process is amenable to scale-up on a 1 g laboratory scale. The factors leading to high selectivity in this DKR process have been probed through computation, with an N-C=O⋅⋅⋅isothiouronium interaction identified as key to producing ester products in highly enantioenriched form.

Synthesis of Tetra-Substituted 3-Hydroxyphthalide Esters by Isothiourea-Catalysed Acylative Dynamic Kinetic Resolution

A general and highly enantioselective method for the preparation of tetra-substituted 3-hydroxyphthalide esters via isothiourea-catalysed acylative dynamic kinetic resolution (DKR) is reported. Using (2S,3R)-HyperBTM (5 mol %) as the catalyst, the scope and limitations of this methodology have been extensively probed, with high enantioselectivity and good to excellent yields observed (>40 examples, up to 99 %, 99 : 1 er). Substitution of the aromatic core within the 3-hydroxyphthalide skeleton, as well as aliphatic and aromatic substitution at C(3), is readily tolerated. A diverse range of anhydrides, including those from bioactive and pharmaceutically relevant acids, can also be used. The high enantioselectivity observed in this DKR process has been probed computationally, with a key substrate heteroatom donor O⋅⋅⋅acyl-isothiouronium interaction identified through DFT analysis as necessary for enantiodiscrimination.

One-Pot Access to Functionalised Malamides via Organocatalytic Enantioselective Formation of Spirocyclic β-Lactone-Oxindoles and Double Ring-Opening

Malamides (diamide derivatives of malic acid) are prevalent in nature and of significant biological interest, yet only limited synthetic methods to access functionalised enantiopure derivatives have been established to date. Herein, an effective synthetic method to generate this molecular class is developed through in situ formation of spirocyclic β-lactone-oxindoles (employing a known enantioselective isothiourea-catalysed formal [2+2] cycloaddition of C(1)-ammonium enolates and isatin derivatives) followed by a subsequent dual ring-opening protocol (of the β-lactone and oxindole) with amine nucleophiles. The application of this protocol is demonstrated across twelve examples to give densely functionalised malamide derivatives with high enantio- and diastereo-selectivity (up to >95:5 dr and >99:1 er).

Carbene-Catalyzed and Pnictogen Bond-Assisted Access to PIII-Stereogenic Compounds

Intermolecular pnictogen bonding (PnB) catalysis has received increased interest in non-covalent organocatalysis. It has been demonstrated that organic electron-deficient pnictogen atoms can act as prospective Lewis acids. Here, we present a catalytic approach for the asymmetric synthesis of chiral PIII compounds by combining intramolecular PnB interactions and carbene catalysis. Our design features a pre-chiral phosphorus molecule bearing two electron-withdrawing benzoyl groups, resulting in the formation of a σ-hole at the P atom. X-ray and non-covalent interaction (NCI) analysis indicate that the model substrates exhibit intrinsic PnB interaction between the oxygen atom of the formyl group and the phosphorus atom. This induces a conformational locking effect, leading to the crystallization of the phosphorus substrate in a preferred conformation (P212121 chiral group). Under the catalysis of N-heterocyclic carbene, the aldehyde moiety activated by the pnictogen bond selectively reacts with an alcohol to yield the corresponding chiral monoester/phosphorus product with excellent enantioselectivity. This Lewis acidic phosphorus center, aroused by the non-polarized intramolecular pnictogen bond interaction, assists in conformational and selective regulations, providing unique opportunities for catalysis and beyond.

De-epimerizing DyKAT of β-lactones generated by isothiourea-catalysed enantioselective [2 + 2] cycloaddition

An enantioselective isothiourea-catalysed [2 + 2] cycloaddition of C(1)-ammonium enolates with pyrazol-4,5-diones is used to construct spirocyclic β-lactones in good yields, excellent enantioselectivity (99 : 1 er) but with modest diastereocontrol (typically 70 : 30 dr). Upon ring-opening with morpholine or alternative nucleophilic amines and alcohols β-hydroxyamide and β-hydroxyester products are generated with enhanced diastereocontrol (up to >95 : 5 dr). Control experiments show that stereoconvergence is observed in the ring-opening of diastereoisomeric β-lactones, leading to a single product (>95 : 5 dr, >99 : 1 er). Mechanistic studies and DFT analysis indicate a substrate controlled Dynamic Kinetic Asymmetric Transformation (DyKAT) involving epimerisation at C(3) of the β-lactone under the reaction conditions, coupled with a hydrogen bond-assisted nucleophilic addition to the Si-face of the β-lactone and stereodetermining ring-opening. The scope and limitations of a one-pot protocol consisting of isothiourea-catalysed enantio-determining [2 + 2] cycloaddition followed by diastereo-determining ring-opening are subsequently developed. Variation within the anhydride ammonium enolate precursor, as well as N(1) and C(3) within the pyrazol-4,5-dione scaffold is demonstrated, giving a range of functionalised β-hydroxyamides with high diastereo- and enantiocontrol (>20 examples, up to >95 : 5 dr and >99 : 1 er) via this DyKAT.

Elucidating the Binding Mode of Sulfur- and Selenium-Based Cationic Chalcogen-Bond Donors

For a comparison of the interaction modes of various chalcogen-bond donors, 2-chalcogeno-imidazolium salts have been designed, synthesized, and studied by single crystal X-ray diffraction, solution NMR and DFT as well as for their ability to act as activators in an SN1-type substitution reaction. Their interaction modes in solution were elucidated based on NMR diffusion and chemical shift perturbation experiments, which were supported by DFT-calculations. Our finding is that going from lighter to the heavier chalcogens, hydrogen bonding plays a less, while chalcogen bonding an increasingly important role for the coordination of anions. Anion-π interactions also show importance, especially for the sulfur and selenium derivatives.

Chalcogen-Bond-Assisted Formation of the N→C Dative Bonds in the Complexes between Chalcogenadiazoles/Chalcogenatriazoles and Fullerene C60

The existence of the N→C dative bonds in the complexes between N-containing molecules and fullerenes have been verified both theoretically and experimentally. However, finding stable N→C dative bonds is still a highly challenging task. In this work, we investigated computationally the N→C dative bonds in the complexes formed by fullerene C60 with 1,2,5-chalcogenadiazoles, 2,1,3-benzochalcogenadiazoles, and 1,2,4,5-chalcogenatriazoles, respectively. It was found that the N→C dative bonds are formed along with the formation of the N-Ch···C (Ch = S, Se, Te) chalcogen bonds. In the gas phase, from S-containing complexes through Se-containing complexes to Te-containing complexes, the intrinsic interaction energies become more and more negative, which indicates that the N-Ch···C chalcogen bonds can facilitate the formation of the N→C dative bonds. The intrinsic interaction energies are compensated by the large deformation energy of fullerene C60. The total interaction energies of Te-containing complexes are negative, while both total interaction energies of the S-containing complexes and Se-containing complexes are positive. This means that the N→C dative bonds in the Te-containing complexes are more easily observed in experiments in comparison with those in the S-containing complexes and Se-containing complexes. This study provides a new theoretical perspective on the experimental observation of the N→C dative bonds in complexes involving fullerenes. Further, the formation of stable N→C dative bonds in the complexes involving fullerenes can significantly change the properties of fullerenes, which will greatly simulate and expand the application range of fullerenes.

Phenotellurazine redox catalysts: elements of design for radical cross-dehydrogenative coupling reactions

Redox active phenotellurazine catalysts have been recently utilized in two different cross-dehydrogenative coupling reactions. In this study, we revisit the design of the phenotellurazine redox catalysts. In particular, we investigate the level of cooperativity between the Te- and N-centers, the effect of secondary versus tertiary N-centers, the effect of heterocyclic versus non-heterocyclic structures, and the effect of substitution patterns on the redox catalytic activity.

Enantioselective Synthesis in Continuous Flow: Polymer-Supported Isothiourea-Catalyzed Enantioselective Michael Addition-Cyclization with α-Azol-2-ylacetophenones

A packed reactor bed incorporating a polymer-supported isothiourea HyperBTM catalyst derivative has been used to promote the enantioselective synthesis of a range of heterocyclic products derived from α-azol-2-ylacetophenones and -acetamides combined with alkyl, aryl, and heterocyclic α,β-unsaturated homoanhydrides in continuous flow via an α,β-unsaturated acyl-ammonium intermediate. The products are generated in good to excellent yields and generally in excellent enantiopurity (up to 97:3 er). Scale-up is demonstrated on a 15 mmol scale, giving the heterocyclic product in 68% overall yield with 98:2 er after recrystallization.

Selective Activation of Chalcogen Bonding: An Efficient Structuring Tool toward Crystal Engineering Strategies

ConspectusAmong the noncovalent interactions available in the toolbox of crystal engineering, chalcogen bonding (ChB) has recently entered the growing family of σ-hole interactions, following the strong developments based on the halogen bonding (XB) interaction over the last 30 years. The monovalent character of halogens provides halogen bonding directionality and strength. Combined with the extensive organic chemistry of Br and I derivatives, it has led to many applications of XB, in solution (organo-catalysis, anion recognition and transport), in the solid state (cocrystals, conducting materials, fluorescent materials, topochemical reactions, ...), in soft matter (liquid crystals, gels,···), and in biochemistry. The recognition of the presence of two σ-holes on divalent chalcogens and the ability to activate them, as in XB, with electron-withdrawing groups (EWG) has fueled more recent interest in chalcogen bonding. However, despite being identified for many years, ChB still struggles to make a mark due to (i) the underdeveloped synthetic chemistry of heavier Se and Te; (ii) the limited stability of organic chalcogenides, especially tellurides; and (iii) the poor predictability of ChB associated with the presence of two σ-holes. It therefore invites a great deal of attention of molecular chemists to design and develop selected ChB donors, for the scrutiny of fundamentals of ChB and their successful use in different applications. This Account aims to summarize our own contributions in this direction that extend from fundamental studies focused on addressing the lack of directionality/predictability in ChB to a systematic demonstration of its potential, specifically in crystal engineering, and particularly toward anionic networks on the one hand, topochemical reactions on the other hand.In this Account, we share our recent results aimed at recovering with ChB the same degree of strength and predictability found with XB, by focusing on divalent Se and Te systems with two different substituents, one of them with an EWG, to strongly unbalance both σ-holes. For that purpose, we explored this dissymmetrization concept within three chemical families, selenocyanates R-SeCN, alkynyl derivatives R-C≡C-(Se/Te)Me, and o-carborane derivatives. Such compounds were systematically engaged in cocrystals with either halides or neutral bipyridines as ChB acceptors, revealing their strong potential to chelate halides as well as their ability to organize reactive molecules such as alkenes and butadiynes toward [2+2] cycloadditions and polydiacetylene formation, respectively. This selective activation concept is not limited to ChB but can be effectively used on all other σ-hole interactions (pnictogen bond, tetrel bond, etc.) where one needs to control the directionality of the interaction.

Carbon-based Biradicals: Structural and Magnetic Switching

Sterically hindered C═C double bonds often deform into a bent or twisted geometry. Thus, many overcrowded ethylenes or anthraquinodimethanes can adopt multiple conformations, such as a folded form or a twisted form, which are interconvertible under the application of external stimuli. A perpendicular form with biradical character can also be adopted when designed to incorporate a stable carbon-based radical unit, which is involved in stimuli-responsive magnetic switching accompanied by a structural change. This review focuses on recent advances in the development of such strained π-electron systems and reveals the factors that affect the mutual interconversion and switching behavior. The energy barrier for the interconversion of conformational isomers is affected by the tricyclic skeleton or bulky substituents on the C═C double bonds, whereas the relative stability of the perpendicular biradical form increases with the additional insertion of 9,10-anthrylene units into the C═C double bonds.

Understanding divergent substrate stereoselectivity in the isothiourea-catalysed conjugate addition of cyclic α-substituted β-ketoesters to α,β-unsaturated aryl esters

The development of enantioselective synthetic methods capable of generating vicinal stereogenic centres, where one is tetrasubstituted (such as either an all-carbon quaternary centre or where one or more substituents are heteroatoms), is a recognised synthetic challenge. Herein, the enantioselective conjugate addition of a range of carbo- and heterocyclic α-substituted β-ketoesters to α,β-unsaturated aryl esters using the isothiourea HyperBTM as a Lewis base catalyst is demonstrated. Notably, divergent diastereoselectivity is observed through the use of either cyclopentanone-derived or indanone-derived substituted β-ketoesters with both generating the desired stereodefined products with high selectivity (>95 : 5 dr, up to 99 : 1 er). The scope and limitations of these processes are demonstrated, alongside application on gram scale. The origin of the divergent substrate selectivity has been probed through the use of DFT-analysis, with preferential orientation driven by dual stabilising CH⋯O interactions. The importance of solvation with strongly polar transition-states is highlighted and the SMD solvation model is demonstrated to capture solvation effects reliably.

Formation, Characterization, and Bonding of cis- and trans-[PtCl2{Te(CH2)6}2], cis-trans-[Pt3Cl6{Te(CH2)6}4], and cis-trans-[Pt4Cl8{Te(CH2)6}4]: Experimental and DFT Study

[PtCl2{Te(CH2)6}2] (1) was synthesized from the cyclic telluroether Te(CH2)6 and cis-[PtCl2(NCPh)2] in dichloromethane at room temperature under the exclusion of light. The crystal structure determination showed that in the solid state, 1 crystallizes as yellow plate-like crystals of the cis-isomer 1cis and the orange-red interwoven needles of 1trans. The crystals could be separated under the microscope. NMR experiments showed that upon dissolution of the crystals of 1cis in CDCl3, it isomerizes and forms a dynamic equilibrium with the trans-isomer 1trans that becomes the predominant species. Small amounts of cis-trans-[Pt3Cl6{Te(CH2)6}4] (2) and cis-trans-[Pt4Cl8{Te(CH2)6}4] (3) were also formed and structurally characterized. Both compounds show rare bridging telluroether ligands and two different platinum coordination environments, one exhibiting a cis-Cl/cis-Te(CH2)6 arrangement and the other a trans-Cl/trans-Te(CH2)6 arrangement. Complex 2 has an open structure with two terminal and two bridging telluroether ligands, whereas complex 3 has a cyclic structure with four Te(CH2)6 bridging ligands. The bonding and formation of the complexes have been discussed through the use of DFT calculations combined with QTAIM analysis. The recrystallization of the mixture of the 1:1 reaction from d6-DMSO afforded [PtCl2{S(O)(CD3)2}{Te(CH2)6}] (4) that could also be characterized both structurally and spectroscopically.

Synthesis, X-ray characterization and DFT analysis of dicyanidoaurate telluronium salts: on the importance of charge assisted chalcogen bonds

In this manuscript we report the synthesis and X-ray characterization of two cyanidoaurate telluronium salts, namely (3-fluorophenyl)(methyl)(phenyl)telluronium dicyanidoaurate [(3-F-Ph)(Me)(Ph)Te][Au(CN)2] (1) and methyldiphenyltelluronium dicyanidoaurate [(Me)(Ph)2Te][Au(CN)2] (2). In the solid state, the tellurium atom establishes three concurrent and directional chalcogen bonds (ChBs) with the adjacent anions, in both compounds. These charge-assisted ChBs (CAChBs) have been analyzed using DFT calculations and several computational tools. The MEP surface analysis discloses the existence of three σ-holes at the Te-atoms capable of establishing strong CAChBs with the counter-ions. In addition, significant charge transfer from the lone pair orbital at the N-atom of the anion to the antibonding σ*(Te-C) orbital of the cation is observed in some cases.

Chalcogen Bonding Catalysis: Tellurium, the Last Frontier?

Chalcogen bonding (ChB) is the non-covalent interaction occurring between chalcogen atoms as Lewis acid sites and atoms or groups of atoms able to behave as Lewis bases through their lone pair or π electrons. Analogously to its sister halogen bonding, the high directionality of this interaction was implemented for precise structural organizations in the solid state and in solution. Regarding catalysis, ChB is now accepted as a new mode of activation as demonstrated by the increased number of examples in the last five years. In the family of ChB catalysts, those based on tellurium rapidly appeared to overcome their lighter sulfur and selenium counterparts. In this review, we highlight the Lewis acid properties of tellurium-based derivatives in solution and summarize the start-of-the-art of their applications in catalysis.

2-Benzamide Tellurenyl Iodides: Synthesis and Their Catalytic Role in CO2 Mitigation

Benzamide-derived organochalcogens (chalcogen=S, Se, and Te) have shown promising interest in biological and synthetic chemistry. Ebselen molecule derived from benzamide moiety is the most studied organoselenium. However, its heavier congener organotellurium is under-explored. Here, an efficient copper-catalyzed atom economical synthetic method has been developed to synthesize 2-phenyl-benzamide tellurenyl iodides by inserting a tellurium atom into carbon-iodine bond of 2-iodobenzamides in one pot with 78-95 % yields. Further, the Lewis acidic nature of Te center and Lewis basic nature of nitrogen of the synthesized 2-Iodo-N-(quinolin-8-yl)benzamide tellurenyl iodides enabled them as pre-catalyst for the activation of epoxide with CO2 at 1 atm for the preparation of cyclic carbonates with TOF and TON values of 1447 h-1 and 4343, respectively, under solvent-free conditions. In addition, 2-iodo-N-(quinolin-8-yl)benzamide tellurenyl iodides have also been used as pre-catalyst for activating anilines and CO2 to form a variety of 1,3-diaryl ureas up to 95 % yield. The mechanistic investigation for CO2 mitigation is done by 125 Te NMR and HRMS studies. It seems that the reaction proceeds via formation of catalytically active Te-N heterocycle, an ebtellur intermediate which is isolated and structurally characterized.

Enantioselective isothiourea-catalysed reversible Michael addition of aryl esters to 2-benzylidene malononitriles

Catalytic enantioselective transformations usually rely upon optimal enantioselectivity being observed in kinetically controlled reaction processes, with energy differences between diastereoisomeric transition state energies translating to stereoisomeric product ratios. Herein, stereoselectivity resulting from an unusual reversible Michael addition of an aryl ester to 2-benzylidene malononitrile electrophiles using an isothiourea as a Lewis base catalyst is demonstrated. Notably, the basicity of the aryloxide component and reactivity of the isothiourea Lewis base both affect the observed product selectivity, with control studies and crossover experiments indicating the feasibility of a constructive reversible Michael addition from the desired product. When this reversible addition is coupled with a crystallisation-induced diastereomer transformation (CIDT) it allows isolation of products in high yield and stereocontrol (14 examples, up to 95 : 5 dr and 99 : 1 er). Application of this process to gram scale, plus derivatisations to provide further useful products, is demonstrated.

Probing Regio- and Enantioselectivity in the Formal [2 + 2] Cycloaddition of C(1)-Alkyl Ammonium Enolates with β- and α,β-Substituted Trifluoromethylenones

The isothiourea-catalyzed regio- and enantioselective formal [2 + 2] cycloaddition of C(1)-alkyl and C(1)-unsubstituted ammonium enolates with β- and α,β-substituted trifluoromethylenones has been developed. In all cases, preferential [2 + 2]-cycloaddition over the alternative [4 + 2]-cycloaddition is observed, giving β-lactones with excellent diastereo- and enantioselectivity (34 examples, up to >95:5 dr, >99:1 er). The regioselectivity of the process was dictated by the nature of the substituents on both reaction components. Solely [2 + 2] cycloaddition products are observed when using α,β-substituted trifluoromethylenones or α-trialkylsilyl acetic acid derivatives; both [2 + 2] and [4 + 2] cycloaddition products are observed when using β-substituted trifluoromethylenones and α-alkyl-α-trialkylsilyl acetic acids as reactants, with the [2 + 2] cycloaddition as the major reaction product. The beneficial role of the α-silyl substituent within the acid component in this protocol has been demonstrated by control experiments.

Sulfur-mediated chalcogen versus hydrogen bonds in proteins: a see-saw effect in the conformational space

Divalent sulfur (S) forms a chalcogen bond (Ch-bond) via its σ-holes and a hydrogen bond (H-bond) via its lone pairs. The relevance of these interactions and their interplay for protein structure and function is unclear. Based on the analyses of the crystal structures of small organic/organometallic molecules and proteins and their molecular electrostatic surface potential, we show that the reciprocity of the substituent-dependent strength of the σ-holes and lone pairs correlates with the formation of either Ch-bond or H-bond. In proteins, cystines preferentially form Ch-bonds, metal-chelated cysteines form H-bonds, while methionines form either of them with comparable frequencies. This has implications for the positioning of these residues and their role in protein structure and function. Computational analyses reveal that the S-mediated interactions stabilise protein secondary structures by mechanisms such as helix capping and protecting free β-sheet edges by negative design. The study highlights the importance of S-mediated Ch-bond and H-bond for understanding protein folding and function, the development of improved strategies for protein/peptide structure prediction and design and structure-based drug discovery.

Chalcogen-Bond Catalysis: Telluronium-Catalyzed [4+2]-Cyclocondensation of (in situ Generated) Aryl Imines with Alkenes

In the chalcogen series, tellurium species exhibit the strongest chalcogen bonding (ChB) interaction with electron-rich atom. This property explains the renewed interested toward tellurium-based derivatives and their use in different applications, such as organocatalysis. In this context, the catalytic activity of telluronium salts in the Povarov reaction is presented herein. Different dienophiles, as well as imines of variable electronic nature, efficiently react in the presence of catalytic amount of either diarylmethyltelluronium or triaryltelluronium salts. Both catalysts could also readily perform the three-component Povarov reaction starting from aldehyde, aniline and dihydrofuran. The reactivity of telluroniums towards imines and aldehydes was confirmed in the solid state by the ability of Te atom to interact through ChB with the oxygen carbonyl of acetone, and in solution with significant shift variations of the imine proton and of the tellurium atom in ¹ H and ¹²⁵ Te NMR spectroscopy. For the most active telluronium catalysts bearing CF₃ groups, association constants (K) with N-phenyl phenylmethanimine in the range 22-38 M^-1 were measured in dichloromethane.

Chalcogen Bonds: How to Characterize Them in Solution?

Chalcogen bonds (ChBs) occur between molecules containing Lewis acidic chalcogen substituents and Lewis bases. Recently, ChB emerged as a pivotal interaction in solution-based applications such as anion recognition, anion transport and catalysis. However, before moving to applications, the involvement of ChB must be established in solution. In this Concept article, we provide a brief review of the currently available experimental investigations of ChB in solution.

Visible-Light-Switchable Tellurium-Based Chalcogen Bonding: Photocontrolled Anion Binding and Anion Abstraction Catalysis

Exploring new noncovalent bonding motifs with reversibly tunable binding affinity is of fundamental importance in manipulating the properties and functions of supramolecular self-assembly systems and materials. Herein, for the first time, we demonstrate a unique visible-light-switchable telluro-triazole/triazolium-based chalcogen bonding (ChB) system in which the Te moieties are connected by azobenzene cores. The binding strengths between these azo-derived ChB receptors and the halide anions (Cl^- , Br^- ) could be reversibly regulated upon irradiation by visible light of different wavelengths. The cis-bidentate ChB receptors exhibit enhanced halide anion binding ability compared to the trans-monodentate receptors. In particular, the telluro-triazolium-based ChB receptor can achieve both high and significantly photoswitchable binding affinities for halide anions, which enable it to serve as an efficient photocontrolled organocatalyst for ChB-assisted halide abstraction in a Friedel-Crafts alkylation benchmark reaction.

Supramolecular Chalcogen-Bonded Semiconducting Nanoribbons at Work in Lighting Devices

This work describes the design and synthesis of a π-conjugated telluro[3,2-β][1]-tellurophene-based synthon that, embodying pyridyl and haloaryl chalcogen-bonding acceptors, self-assembles into nanoribbons through chalcogen bonds. The ribbons π-stack in a multi-layered architecture both in single crystals and thin films. Theoretical studies of the electronic states of chalcogen-bonded material showed the presence of a local charge density between Te and N atoms. OTFT-based charge transport measurements showed hole-transport properties for this material. Its integration as a p-type semiconductor in multi-layered CuI -based light-emitting electrochemical cells (LECs) led to a 10-fold increase in stability (38 h vs. 3 h) compared to single-layered devices. Finally, using the reference tellurotellurophene congener bearing a C-H group instead of the pyridyl N atom, a herringbone solid-state assembly is formed without charge transport features, resulting in LECs with poor stabilities (<1 h).

A Desilylative Approach to Alkyl Substituted C(1)-Ammonium Enolates: Application in Enantioselective [2+2] Cycloadditions

The catalytic generation of C(1)-ammonium enolates from the corresponding α-silyl-α-alkyl substituted carboxylic acids using the isothiourea HyperBTM is reported. This desilylative approach grants access to α-unsubstituted and α-alkyl substituted C(1)-ammonium enolates, which are typically difficult to access through traditional methods reliant upon deprotonation. The scope and limitations of this process is established in enantioselective [2+2]-cycloaddition processes with perfluoroalkylketones (31 examples, up to 96 % yield and >99 : 1 er), as well as selective [2+2]-cycloaddition with trifluoromethyl enones (4 examples, up to 75 % yield and >99 : 1 er). Preliminary mechanistic studies indicate this process proceeds through an initial kinetic resolution of an in situ prepared (±)-α-silyl-α-alkyl substituted anhydride, while the reaction process exhibits overall pseudo zero-order kinetics.

Halonium, chalconium, and pnictonium salts as noncovalent organocatalysts: a computational study on relative catalytic activity

This theoretical study sheds light on the relative catalytic activity of pnictonium, chalconium, and halonium salts in reactions involving elimination of chloride and electrophilic activation of a carbonyl group. DFT calculations indicate that for cationic aromatic onium salts, values of the electrostatic potential on heteroatom σ-holes gradually increase from pnictogen- to halogen-containing species. The higher values of the potential on the halogen atoms of halonium salts result in the overall higher catalytic activity of these species, but in the case of pnictonium and chalconium cations, weak interactions from the side groups provide an additional stabilization effect on the reaction transition states. Based upon quantum-chemical calculations, the catalytic activity of phosphonium(V) and arsenonium(V) salts is expected to be too low to obtain effective noncovalent organocatalytic compounds, whereas stibonium(V), telluronium(IV) and iodonium(III) salts exhibit higher potential in application as noncovalent organocatalysts.

Catalytic Activation of Imines by Chalcogen Bond Donors in a Povarov [4+2] Cycloaddition Reaction

Recently, chalcogen bonding has been investigated in more detail in organocatalysis and the scope of activated functionalities continues to increase. Herein, the activation of imines in a Povarov [4+2] cycloaddition reaction with bidentate cationic chalcogen bond donors is presented. Tellurium-based Lewis acids show superior properties compared to selenium-based catalysts and inactive sulfur-based analogues. The catalytic activity of the chalcogen bonding donors increases with weaker binding anions. Triflate, however, is not suitable due to its participation in the catalytic pathway. A solvent screening revealed a more efficient activation in less polar solvents and a pronounced effect of solvent (and catalyst) on endo : exo diastereomeric ratio. Finally, new chiral chalcogen bonding catalysts were applied but provided only racemic mixtures of the product.

Chalcogen bond-guided conformational isomerization enables catalytic dynamic kinetic resolution of sulfoxides

Conformational isomerization can be guided by weak interactions such as chalcogen bonding (ChB) interactions. Here we report a catalytic strategy for asymmetric access to chiral sulfoxides by employing conformational isomerization and chalcogen bonding interactions. The reaction involves a sulfoxide bearing two aldehyde moieties as the substrate that, according to structural analysis and DFT calculations, exists as a racemic mixture due to the presence of an intramolecular chalcogen bond. This chalcogen bond formed between aldehyde (oxygen atom) and sulfoxide (sulfur atom), induces a conformational locking effect, thus making the symmetric sulfoxide as a racemate. In the presence of N-heterocyclic carbene (NHC) as catalyst, the aldehyde moiety activated by the chalcogen bond selectively reacts with an alcohol to afford the corresponding chiral sulfoxide products with excellent optical purities. This reaction involves a dynamic kinetic resolution (DKR) process enabled by conformational locking and facile isomerization by chalcogen bonding interactions.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

Stereoselective Processes Based on σ-Hole Interactions

The σ-hole interaction represents a noncovalent interaction between atoms with σ-hole(s) on their surface (such as halogens and chalcogens) and negative sites. Over the last decade, significant developments have emerged in applications where the σ-hole interaction was demonstrated to play a key role in the control over chirality. The aim of this review is to give a comprehensive overview of the current advancements in the use of σ-hole interactions in stereoselective processes, such as formation of chiral supramolecular assemblies, separation of enantiomers, enantioselective complexation and asymmetric catalysis.

Isothiourea-Catalyzed [2 + 2] Cycloaddition of C(1)-Ammonium Enolates and N-Alkyl Isatins

Enantioselective [2 + 2] cycloaddition of C(1)-ammonium enolates generated catalytically using the isothiourea HyperBTM with N-alkyl isatins gives spirocyclic β-lactones. In situ ring opening with an amine nucleophile generates isolable highly enantioenriched products in up to 92:8 dr and in >99:1 er.

O2-Mediated Te(II)-Redox Catalysis for the Cross-Dehydrogenative Coupling of Indoles

Very few elements in the periodic system can catalytically activate O₂, such as in the context of cross-dehydrogenative couplings. The development of O₂-activating catalysts is essential to enable new and sustainable reactivity concepts to emerge, because these catalysts also often feature specific activating interactions with the target substrates. In this context, the unprecedented Te(II)/Te(III) catalyzed dehydrogenative C3-C2 dimerization of indoles is described herein. The fact that O₂ can be directly utilized as a terminal oxidant in this reaction, as well as the absence of any background reactivity without the redox-active Te catalyst, constitute very important milestones for the fields of cross-dehydrogenative couplings and tellurium catalysis.

Cooperative Palladium/Isothiourea Catalyzed Enantioselective Formal (3+2) Cycloaddition of Vinylcyclopropanes and α,β-Unsaturated Esters

A protocol for the enantioselective synthesis of substituted vinylcyclopentanes has been realised using cooperative palladium and isothiourea catalysis. Treatment of vinylcyclopropanes with Pd(PPh3 )4 generates a zwitterionic π-allyl palladium intermediate that intercepts a catalytically generated α,β-unsaturated acyl ammonium species prepared from the corresponding α,β-unsaturated para-nitrophenyl ester and the isothiourea (R)-BTM. Intermolecular formal (3+2) cycloaddition between these reactive intermediates generates functionalised cyclopentanes in generally good yields and excellent diastereo- and enantiocontrol (up to >95 : 5 dr, 97 : 3 er), with the use of LiCl as an additive proving essential for optimal stereocontrol. To the best of our knowledge a dual transition metal/organocatalytic process involving α,β-unsaturated acyl ammonium intermediates has not been demonstrated previously.

Isothiourea-Catalyzed Enantioselective Michael Addition of Malonates to α,β-Unsaturated Aryl Esters

An enantioselective Michael addition of malonates to α,β-unsaturated para-nitrophenyl esters was achieved using the Lewis basic isothiourea HyperBTM, giving excellent levels of product enantioselectivity (up to >99:1 enantiomeric ratio) in good yields and with complete regioselectivity (>20:1 regioselectivity ratio) in the presence of alternative (phenyl ketone and ethyl ester) Michael acceptors. Density functional theory calculations indicate that N-acylation is rate-limiting. This constitutes a rare example of a highly enantioselective addition of simple, readily available malonates to α,β-unsaturated esters.

Alkynyl Sulfonium Salts Can Be Employed as Chalcogen-Bonding Catalysts and Generate Alkynyl Radicals under Blue-Light Irradiation

Chalcogen bonding (ChB) has emerged as a promising tool in organic synthesis. However, compared with the well-developed selenium- and tellurium-based salt catalysts, the ChB catalysis of sulfonium salts is still unknown. Here, we report a new type of alkynyl-sulfonium salt ChB catalysis for various ionic transformations, including transfer hydrogenation, bromination, bromolactonization, dimerization of 1,1-diphenylethylene, nitro-Michael addition reaction and Ritter reaction. More importantly, the photocapability of ChB was first demonstrated to generate alkynyl radicals for the synthesis of a variety of chalcogenoacetylenes. Mechanistic studies shed light on the mechanism of the photoinduced reactions and confirmed the involvement of alkynyl radicals which are difficult to generate otherwise.

Solid-State Assembly by Chelating Chalcogen Bonding in Quinodimethane Tetraesters Fused with a Chalcogenadiazole

In contrast to p-quinodimethane tetraesters, which undergo facile polymerization due to their diradical character, newly synthesized 1 and 2 consisting of a chalcogenadiazole fused to a p-naphthoquinodimethane tetraester are thermodynamically stable due to butterfly-shaped deformation. Such a folded molecular structure is also favorable for chalcogen bond (ChB) formation through intermolecular close contacts between a chalcogen atom (E: Se or S) and the oxygen atoms of ester groups in a crystal. The less-explored chelating-ChB through a C=O⋅⋅⋅E⋅⋅⋅O=C contact [Se⋅⋅⋅O: 2.94-3.37 Å] is the key supramolecular synthon for the formation of a one-dimensional rod-like assembly in a crystal, which is commonly observed in selenadiazole-tetraesters (1) with OMe, OEt, and OiPr groups. The formation of inclusion cavities between the rods shows that 1 could serve as solid-state host molecules for clathrate formation, as found in a hexane-solvated crystal. In contrast, thiadiazole-tetraesters (2) are less suitable for the formation of a rod-like assembly since the ChB involving S is less effective, and thus is overwhelmed by weak hydrogen bonds through C-H⋅⋅⋅O contacts.

Te(II)-Catalyzed Cross-Dehydrogenative Phenothiazination of Anilines

Oxidative clicklike reactions are useful for the late-stage functionalization of pharmaceuticals and organic materials. Hence, novel methodologies that enable such transformations are in high demand. Herein we describe a tellurium(II)-catalyzed cross-dehydrogenative phenothiazination (CDP) of aromatic amines. A key feature of this method is a cooperative effect between the phenotellurazine catalyst and the silver salt, which serves as a chemical oxidant for the reaction. This novel catalysis concept therefore enables a considerably broader scope compared with previous chemical oxidation methods.

Interplay between chalcogen bonds and dynamic covalent bonds

A combination of chalcogen bonds, one type of emerging non-covalent bonding force, and imine bonds, allow the control of the dynamic covalent chemistry with orbital interactions and the reversal of kinetic and thermodynamic selectivity.

Leveraging the Domino Skeletal Expansion of Thia-/Selenazolidinones via Nitrogen-Atom Transfer in Hexafluoroisopropanol: Room Temperature Access to Six-Membered S/Se,N-Heterocycles

Herein, a highly regioselective domino skeletal-expansion process that transforms 2-aminothiazolidinone into six-membered S,N-heterocycle is developed with the aid of TMS-azide in hexafluoroisopropanol (HFIP) at ambient temperature. Functioning of the C2 tertiary amine as latent reactive group on thiazolidinone moiety was the key to this development, which allowed relay substitution with azide and imparted subsequent ring-expansion under metal/acid free-conditions. The reaction also underscored an intermolecular nitrogen-atom transfer process from TMS-azide leading to final products, where any intermediary azidothiazolidinone was absent. The strategy was extendable to analogous synthesis of Se,N-heterocycles, and furthermore, late-stage drug-modification and follow-up transformations were also performed. Density functional theory calculations and control experiments provided important mechanistic insights and highlighted potential roles of HFIP in the transformation.

Design of Azobenzene beyond Simple On-Off Behavior

Azobenzenes are without a doubt the most widely used light-induced switching units, and there is a plethora of application examples ranging from supramolecular chemistry to material science and biological chemistry. Here, we present a smart azobenzene, in which the photoswitching capability of the azobenzene moiety can be reversibly switched on and off using a second unit (redox switch). This second switching unit is based on the variation of the strength of a chalcogen bond between the azo group and a Te-Ph unit in ortho position to the azo group. This allows the selective switching of only one azobenzene unit in the presence of other azobenzene switches. The entire double-switch is a very simple, small system that can also be easily synthesized. As a result, this double-switch can be used as a smarter replacement for the established azobenzene system in the future. For example, in contrast to the latter this double-switch could be employed to store state information analogous to a flip-flop in digital electronic systems.