Quantification of the Magnetic Anisotropy of a Single-Molecule Magnet from the Experimental Electron Density

Multi-Technique Experimental Benchmarking of the Local Magnetic Anisotropy of a Cobalt(II) Single-Ion Magnet

A comprehensive understanding of the ligand field and its influence on the degeneracy and population of d-orbitals in a specific coordination environment are crucial for the rational design and enhancement of magnetic anisotropy of single-ion magnets (SIMs). Herein, we report the synthesis and comprehensive magnetic characterization of a highly anisotropic Co^II SIM, [L₂Co](TBA)₂ (L is an N,N'-chelating oxanilido ligand), that is stable under ambient conditions. Dynamic magnetization measurements show that this SIM exhibits a large energy barrier to spin reversal U _eff > 300 K and magnetic blocking up to 3.5 K, and the property is retained in a frozen solution. Low-temperature single-crystal synchrotron X-ray diffraction used to determine the experimental electron density gave access to Co d-orbital populations and a derived U _eff, 261 cm^-1, when the coupling between the d _{x ² - y ²} and d_xy orbitals is taken into account, in very good agreement with ab initio calculations and superconducting quantum interference device results. Powder and single-crystal polarized neutron diffraction (PNPD, PND) have been used to quantify the magnetic anisotropy via the atomic susceptibility tensor, revealing that the easy axis of magnetization is pointing along the N-Co-N' bisectors of the N,N'-chelating ligands (3.4° offset), close to the molecular axis, in good agreement with complete active space self-consistent field/N-electron valence perturbation theory to second order ab initio calculations. This study provides benchmarking for two methods, PNPD and single-crystal PND, on the same 3d SIM, and key benchmarking for current theoretical methods to determine local magnetic anisotropy parameters.

Change in the Electronic Structure of the Cobalt(II) Ion in a One-Dimensional Polymer with Flexible Linkers Induced by a Structural Phase Transition

A new 1D-coordination polymer [Co(Piv)₂(NH₂(CH₂)₆NH₂)]_n (1, Piv is Me₃CCO₂^- anion) was obtained, the mononuclear fragments {Co(O₂CR)₂} within which are linked by μ-bridged molecules of hexamethylenediamine (NH₂(CH₂)₆NH₂). For this compound, two different monoclinic C2/c (α-1) and P2/n (β-1) phases were found at room temperature by single-crystal X-ray diffraction analysis, with a similar structure of chains and their packages in unit cells. The low-temperature phase (γ-1) of crystal 1 at 150 K corresponds to the triclinic space group P-1. As the temperature decreases, the structural phase transition (SPT) in the α-1 and β-1 crystals is accompanied by an increase in the crystal packing density caused by the rearrangements of both H-bonds and the nearest ligand environment of the cobalt atom ("octahedral CoN₂O₄ around the metal center at room temperature" → "pseudo-tetrahedral CoN₂O₂ at 150 K"). The SPT was confirmed by DSC in the temperature range 210-150 K; when heated above 220 K, anomalies in the behavior of the heat flow are observed, which may be associated with the reversibility of SPT; endo effects are observed up to 300 K. The SPT starts below 200 K. At 100 K, a mixture of phases was found in sample 1: 27% α-1 phase, 61% γ-1 phase. In addition, at 100 K, 12% of the new δ-1 phase was detected, which was identified from the diffraction pattern at 260 K upon subsequent heating: the a,b,c-parameters and unit cell volume are close to the structure parameters of γ-1, and the values of the α,β,γ-angles are significantly different. Further heating leads to a phase transition from δ-1 to α-1, which both coexist at room temperature. According to the DC magnetometry data, during cooling and heating, the χ_MT(T) curves for 1 form a hysteresis loop with ~110 K, in which the difference in the χ_MT values reaches 9%. Ab initio calculations of the electronic structure of cobalt(II) in α-1 and γ-1 have been performed. Based on the EPR data at 10 K and the ab initio calculations, the behavior of the χ_MT(T) curve for 1 was simulated in the temperature range of 2-150 K. It was found that 1 exhibits slow magnetic relaxation in a field of 1000 Oe.

Pentacoordinate Cobalt(II) Single Ion Magnets with Pendant Alkyl Chains: Shall We Go for Chloride or Bromide?

Four pentacoordinate complexes 1-4 of the type [Co(L1)X2] and [Co(L2)X2] (where L1=2,6-bis(1-octyl-1H-benzimidazol-2-yl)pyridine for 1 and 2, L2=2,6-bis(1-dodecyl-1H-benzimidazol -2-yl)-pyridine for 3 and 4; X = Cl- for 1 and 3, X...

Field-induced slow magnetic relaxation behaviours in binuclear cobalt(II) metallocycle and exchange-coupled cluster

Precise control of structures and magnetic properties of a molecular material constitutes an important challenge to realize the tailor-made magnetic function. Herein, we reported that the ligand-directed coordination self-assembly of...

Benchmarking magnetic and spectroscopic properties on highly stable 3d metal complexes with tuneable bis(benzoxazol-2-yl)methanide ligands

Two series a and b of 3d metal based complexes 1-4 [M^II{(4-R-NCOC₆H₄)₂CH}₂], (with M = Mn (1), Fe (2), Co (3), Ni (4) and R = H (a) or Me (b)) were synthesised and structurally characterized. The complexes were found to crystallize differently depending on the dication ionic radius and the ligand substitution. All complexes showed remarkable X-ray diffraction resolution that will allow further advanced diffraction experiments. Subsequently, their spectroscopic and magnetic properties were analysed. Complexes 3a and 3b notably show slow magnetic relaxation of their magnetization and represent simple model systems relaxing through a phonon-bottleneck process (3a) or as a field-induced single-molecule magnet (3b, U_eff = 45.0 cm^-1). Remarkably, the magnetic anisotropy in the manganese complex 1b results in induced slow magnetic relaxation. The influence of the dual 4-methylation of the ligands was investigated and found to generate important variations in the physical features of the corresponding complexes. Accessible via one-pot synthesis, these are highly robust against oxidation and moisture. Through smart ligand engineering, they represent stable and tuneable compounds for benchmarking purposes through standard and less-standard characterization methods.

Enhancing Steric Hindrance via Ligand Design in Dysprosium Complexes: From Induced Slow Relaxation to Zero-Field Single-Molecule Magnet Properties

The synthesis and magnetic characterization of three novel Dy compounds, [Dy{PPh₂S(N^tBu)₂}₂(μ-Cl₂)Li(THF)₂] (1), [Dy{PhS(N^tBu)₂}₂(μ-Cl₂)Li(THF)₂] (2), and [Dy{MeS(N^tBu)₃}₂(μ-Cl₂)Li(THF)₂] (3), based on the sulfur-nitrogen ligands RS(N^tBu)_x^- (where R = PPh₂, x = 2 for (1); R = Ph, x = 2 for (2); and R = Me, x = 3 for (3)) are reported. They represent rare examples of lanthanide-based complexes containing sulfur-nitrogen ligands, whose suitability to enhance the magnetic anisotropy in 3d metals was only recently established. Changes in the ligand field environment drastically affect the magnetic properties, with compounds 1 and 2 displaying field-induced single-molecule magnet (SMM) behavior, while compound 3 shows slow relaxation at zero field. These trends strongly suggest that ligand engineering strategies toward linear dysprosium complexes, similar to those for dysprosocenium complexes, should enhance the SMM performances of SN-based lanthanide compounds.

Quantifying magnetic anisotropy using X-ray and neutron diffraction

In this work, the magnetic anisotropy in two iso-structural distorted tetrahedral Co(II) complexes, CoX 2tmtu2 [X = Cl(1) and Br(2), tmtu = tetra-methyl-thio-urea] is investigated, using a combination of polarized neutron diffraction (PND), very low-temperature high-resolution synchrotron X-ray diffraction and CASSCF/NEVPT2 ab initio calculations. Here, it was found consistently among all methods that the compounds have an easy axis of magnetization pointing nearly along the bis-ector of the compression angle, with minute deviations between PND and theory. Importantly, this work represents the first derivation of the atomic susceptibility tensor based on powder PND for a single-molecule magnet and the comparison thereof with ab initio calculations and high-resolution X-ray diffraction. Theoretical ab initio ligand field theory (AILFT) analysis finds the d xy orbital to be stabilized relative to the d xz and d yz orbitals, thus providing the intuitive explanation for the presence of a negative zero-field splitting parameter, D, from coupling and thus mixing of d xy and . Experimental d-orbital populations support this interpretation, showing in addition that the metal-ligand covalency is larger for Br-ligated 2 than for Cl-ligated 1.

Iron(II), Cobalt(II), and Nickel(II) Complexes of Bis(sulfonamido)benzenes: Redox Properties, Large Zero-Field Splittings, and Single-Ion Magnets

Metal complexes of 1,2-diamidobenzenes have been long studied because of their intriguing redox properties and electronic structures. We present here a series of such complexes with 1,2-bis(sulfonamido)benzene ligands to probe the utility of these ligands for generating a large zero-field splitting (ZFS, D) in metal complexes that possibly act as single-ion magnets. To this end, we have synthesized a series of homoleptic ate complexes of the form (X)_n[M{bis(sulfonamido)benzene}₂] (n equals 4 minus the oxidation state of the metal), where M (Fe/Co/Ni), X [K⁺/(K-18-c-6)⁺/(HNEt₃)⁺, with 18-c-6 = 18-crown ether 6], and the substituents (methyl and tolyl) on the ligand [bmsab = 1,2-bis(methanesulfonamido)benzene; btsab = 1,2-bis(toluenesulfonamido)benzene] were varied to analyze their effect on the ZFS, possible single-ion-magnet properties, and redox behavior of these metal complexes. A combination of X-ray crystallography, (spectro)electrochemistry, superconducting quantum interference device magnetometry, high-frequency electron paramagnetic resonance spectroscopy, and Mössbauer spectroscopy was used to investigate the electronic/geometric structures of these complexes and the aforementioned properties. These investigations show that the cobalt(II) complexes display very high negative D values in the range of -100 to -130 cm^-1, and the nickel(II) complexes display very high positive D values of 76 and 58 cm^-1. In addition, the cobalt(II) complexes shows barriers of 200-260 cm^-1 and slow relaxation of the magnetization in the absence of an external magnetic field, underscoring the robustness of this class of complexes. The iron(II) complex exhibits a D value of -3.29 cm^-1 and can be chemically oxidized to an iron(III) complex that has D = -1.96 cm^-1. These findings clearly show that bis(sulfonamido)benzenes are ideally suited to stabilize ate complexes, to generate very high ZFSs at the metal centers with single-ion-magnet properties, and to induce exclusive oxidation at the metal center (for iron) despite the presence of ligands that are potentially noninnocent. Our results therefore substantially enhance the scope for this class of redox-active ligands.