Spectroscopic and Electrokinetic Evidence for a Bifunctional Mechanism of the Oxygen Evolution Reaction*

Activating and Stabilizing Lattice Oxygen via Self-Adaptive Zn-NiOOH Sub-Nanowires for Oxygen Evolution Reaction

Efficient and durable catalysts for the oxygen evolution reaction are essential for realizing the large-scale application of water electrolysis technologies. Here, we report a novel Zn-doped NiOOH subnanowires (Zn-NiOOH SNWs) catalyst synthesized via the electrochemical reconstruction of Zn-NiMoO4 SNWs. The inclusion of Zn triggers a transition in the oxygen evolution reaction mechanism of NiOOH from the adsorbate evolution mechanism to the lattice oxygen mechanism, resulted from Zn's adaptive adjustment of coordination types, which also improves the reaction energetics, thereby enhancing the stability and activity. Furthermore, the subnanowire structure provides further stabilization of the lattice oxygen in Zn-NiOOH, preventing its destructive dissolution. Remarkably, Zn-NiOOH SNWs display a current density of 10 mA cm-2 with an overpotential of only 179 mV and maintain stable operation at 200 mA cm-2 for 800 h with minimal changes in overpotential, establishing them as one of the most effective catalysts involving lattice oxygen for the alkaline oxygen evolution reaction. When utilized as the anode in an alkaline water electrolyzer, our Zn-NiOOH SNWs catalyst demonstrates stability exceeding 500 h under a water-splitting current of 200 mA cm-2, indicating promising potential for practical applications.

The Construction of Face-to-Face Combination between NiFe-layered Double Hydroxide Nanosheets and Monolayer rGO for Efficient Water Splitting and Oxygen Reduction

Developing cost-effective and efficient electrocatalysts is essential for advancing a green energy future. Herein, a NiFe-layered double hydroxide loaded on reduced graphene oxide (NiFe-LDHs@rGO) hybrid was synthesized using a straightforward three-step process involving exfoliation tearing, electrostatic self-assembly, and chemical reduction. The face-to-face packing and ultrathin exfoliation enable strong heterogeneous interactions, fully harnessing the potential of these complementary two-dimensional counterparts. Consequently, the resultant catalyst displays outstanding oxygen evolution reaction (OER) catalytic activity and stability, whose overpotential is as low as 241 mV at 30 mA cm-2 and 255 mV at 50 mA cm-2 with a low Tafel slope of 62.1 mV dec-1. Both the experimental results and density functional theory (DFT) calculations reveal that the face-to-face assembly strengthens the electronic interactions between NiFe-LDHs and rGO, which effectively modulates the d-band center of Ni and Fesites and improves the reaction kinetics for OER. Moreover, the resultant NiFe-LDHs@rGO hybrids exhibit excellent multifunctional catalytic performance. Its hydrogen evolution reaction (HER) activity is endowed by Fe-site of NiFe-LDHs and defect states rGO and achieves a low voltage of 1.68 V to drive a current density of 10 mA cm-2 for overall water splitting. The face-to-face heteroassembly also imparts NiFe-LDHs@rGO with superior oxygen reduction reaction (ORR) activity, with a half-wave potential of 0.70 V and a limiting current density of 4.2 mA cm-2. Its ORR primarily follows a four-electron transfer pathway with a minor contribution from a two-electron process. This study establishes the groundwork for optimizing two-dimensional heterogeneous interfaces in LDH@carbon-based materials for advanced energy conversion.

Regulating Local Coordination Sphere of Ir Single Atoms at the Atomic Interface for Efficient Oxygen Evolution Reaction

Single-atom catalysts dispersed on an oxide support are essential for overcoming the sluggishness of the oxygen evolution reaction (OER). However, the durability of most metal single-atoms is compromised under harsh OER conditions due to their low coordination (weak metal-support interactions) and excessive disruption of metal-Olattice bonds to enable lattice oxygen participation, leading to metal dissolution and hindering their practical applicability. Herein, we systematically regulate the local coordination of Irsingle-atoms at the atomic level to enhance the performance of the OER by precisely modulating their steric localization on the NiO surface. Compared to conventional Irsingle-atoms adsorbed on NiO surface, the atomic Ir atoms partially embedded within the NiO surface (Iremb-NiO) exhibit a 2-fold increase in Ir-Ni second-shell interaction revealed by X-ray absorption spectroscopy (XAS), suggesting stronger metal-support interactions. Remarkably, Iremb-NiO with tailored coordination sphere exhibits excellent alkaline OER mass activity and long-term durability (degradation rate: ∼1 mV/h), outperforming commercial IrO2 (∼26 mV/h) and conventional Irsingle-atoms on NiO (∼7 mV/h). Comprehensive operando X-ray absorption and Raman spectroscopies, along with pH-dependence activity tests, identified high-valence atomic Ir sites embedded on the NiOOH surface during the OER followed the lattice oxygen mechanism, thereby circumventing the traditional linear scaling relationships. Moreover, the enhanced Ir-Ni second-shell interaction in Iremb-NiO plays a crucial role in imparting structural rigidity to Ir single-atoms, thereby mitigating Ir-dissolution and ensuring superior OER kinetics alongside sustained durability.

Unveiling active sites in FeOOH nanorods@NiOOH nanosheets heterojunction for superior OER and HER electrocatalysis in water splitting

The development of cost-effective, highly active, and stable electrocatalysts for water splitting to produce green hydrogen is crucial for advancing clean and sustainable energy technologies. Herein, we present an innovative in-situ synthesis of FeOOH nanorods@NiOOH nanosheets on nickel foam (FeOOH@NiOOH/NF) at an unprecedentedly low temperature, resulting in a highly efficient electrocatalyst for overall water splitting. The optimized FeOOH@NiOOH/NF sample, evaluated through time-dependent studies, exhibits exceptional oxygen evolution reaction (OER) performance with a low overpotential of 261 mV at a current density of 20 mA cm-2, alongside outstanding hydrogen evolution reaction (HER) activity with an overpotential of 150 mV at a current density of 10 mA cm-2, demonstrating excellent stability in alkaline solution. The water-splitting device featuring FeOOH@NiOOH/NF-2 electrodes achieves a voltage of 1.59 V at a current density of 10 mA cm-2, rivalling the state-of-the-art RuO2/NF||PtC/NF electrode system. Density functional theory (DFT) calculations unveil the efficient functionality of the Fe sites within the FeOOH@NiOOH heterojunction as the active OER catalyst, while the Ni centres are identified as the active HER sites. The enhanced performance of OER and HER is attributed to the tailored electronic structure at the heterojunction, modified magnetic moments of active sites, and increased electron density in the dx2-y2 orbital of Fe. This work provides critical insights into the rational design of advanced electrocatalysts for efficient water splitting.

In Situ Reconstructing NiFe Oxalate Toward Overall Water Splitting

Surface reconstruction plays an essential role in electrochemical catalysis. The structures, compositions, and functionalities of the real catalytic species and sites generated by reconstruction, however, are yet to be clearly understood, for the metastable or transit state of most reconstructed structures. Herein, a series of NiFe oxalates (NixFe1- xC2O4, x = 1, 0.9, 0.7, 0.6, 0.5, and 0) are synthesized for overall water splitting electrocatalysis. Whilst NixFe1-xC2O4 shows great hydrogen evolution reaction (HER) activity, the in situ reconstructed NixFe1-xOOH exhibits outstanding oxygen evolution reaction (OER) activity. As identified by the in situ Raman spectroscopy and quasi-in situ X-ray absorption spectroscopy (XAS) techniques, reconstructions from NixFe1-xC2O4 into defective NixFe1-xOOH and finally amorphous NixFe1-xOOH active species (R-NixFe1-xOOH) are confirmed upon cyclic voltammetry processes. Specifically, the fully reconstructed R-Ni0.6Fe0.4OOH demonstrates the best OER activity (179 mV to reach 10 mA cm-2), originating from its abundant real active sites and optimal d-band center. Benefiting from the reconstruction, an alkaline electrolyzer composed of a Ni0.6Fe0.4C2O4 cathode and an in situ reconstructed R-Ni0.6Fe0.4OOH anode achieves a superb overall water splitting performance (1.52 V@10 mA cm-2). This work provides an in-depth structure-property relationship understanding on the reconstruction of catalysts and offers a new pathway to designing novel catalyst.

The dual-functional role of carboxylate in a nickel-iron catalyst towards efficient oxygen evolution

The efficiency of the oxygen evolution reaction (OER) is severely limited by the sluggish proton-coupled electron transfer processes and inadequate long-term stability. Herein, we introduce a carboxylate group (TPA) to modify NiFe layered double hydroxide (NiFe LDH@TPA), resulting in notable improvements in both activity and stability. A combination of spectroscopic and theoretical investigations reveals the dual-functional role of incorporated TPA. It facilitates the deprotonation of OER intermediates while strengthening the Fe-O bond and acting as a molecular fence, ensuring superior OER kinetics and anti-dissolution properties. NiFe LDH@TPA delivers a low overpotential of 200 mV at 10 mA cm-2 and an impressive long-term stability of 500 h at 150 mA cm-2, significantly outperforming its unmodified counterpart. Furthermore, operating in an anion exchange membrane water electrolyzer, it affords prolonged stability at an industrial-scale current density of 1 A cm-2, sustaining performance for over 120 hours. This strategy offers a promising avenue for the development of durable and efficient OER catalysts.

Anion Structure Regulation of Cobalt Silicate Hydroxide Endowing Boosted Oxygen Evolution Reaction

Transition metal silicates (TMSs) are attempted for the electrocatalyst of oxygen evolution reaction (OER) due to their special layered structure in recent years. However, defects such as low theoretical activity and conductivity limit their application. Researchers always prefer to composite TMSs with other functional materials to make up for their deficiency, but rarely focus on the effect of intrinsic structure adjustment on their catalytic activity, especially anion structure regulation. Herein, applying the method of interference hydrolysis and vacancy reserve, new silicate vacancies (anionic regulation) are introduced in cobalt silicate hydroxide (CoSi), named SV-CoSi, to enlarge the number and enhance the activity of catalytic sites. The overpotential of SV-CoSi declines to 301 mV at 10 mA cm-2 compared to 438 mV of CoSi. Source of such improvement is verified to be not only the increase of active sites, but also the positive effect on the intrinsic activity due to the enhancement of cobalt-oxygen covalence with the variation of anion structure by density functional theory (DFT) method. This work demonstrates that the feasible intrinsic anion structure regulation can improve OER performance of TMSs and provides an effective idea for the development of non-noble metal catalyst for OER.

From Synthesis to Mechanisms: In-Depth Exploration of the Dual-Atom Catalytic Mechanisms Toward Oxygen Electrocatalysis

Dual-atom catalysts (DACs) hold a higher metal atom loading and provide greater flexibility in terms of the structural characteristics of their active sites in comparison to single-atom catalysts. Consequently, DACs hold great promise for achieving improved catalytic performance. This article aims to provide a focused overview of the latest advancements in DACs, covering their synthesis and mechanisms in reversible oxygen electrocatalysis, which plays a key role in sustainable energy conversion and storage technologies. The discussion starts by highlighting the structures of DACs and the differences in diatomic coordination induced by various substrates. Subsequently, the state-of-the-art fabrication strategies of DACs for oxygen electrocatalysis are discussed from several different perspectives. It particularly highlights the challenges of increasing the diatomic loading capacity. More importantly, the main focus of this overview is to investigate the correlation between the configuration and activity in DACs in order to gain a deeper understanding of their active roles in oxygen electrocatalysis. This will be achieved through density functional theory calculations and sophisticated in situ characterization technologies. The aim is to provide guidelines for optimizing and upgrading DACs in oxygen electrocatalysis. Additionally, the overview discusses the current challenges and future prospects in this rapidly evolving area of research.

Accelerated Proton Transfer in Asymmetric Active Units for Sustainable Acidic Oxygen Evolution Reaction

The poor durability of Ru-based catalysts limits the practical application in proton exchange membrane water electrolysis (PEMWE). Here, we report that the asymmetric active units in Ru1-xMxO2 (M = Sb, In, and Sn) binary solid solution oxides are constructed by introducing acid-resistant p-block metal sites, breaking the activity and stability limitations of RuO2 in acidic oxygen evolution reaction (OER). Constructing highly asymmetric Ru-O-Sb units with a strong electron delocalization effect significantly shortens the spatial distance between Ru and Sb sites, improving the bonding strength of the overall structure. The unique two-electron redox couples at Sb sites in asymmetric active units trigger additional chemical steps at different OER stages, facilitating continuous proton transfer. The optimized Ru0.8Sb0.2O2 solid solution requires a superlow overpotential of 160 mV at 10 mA cm-2 and a record-breaking stability of 1100 h in an acidic electrolyte. Notably, the scale-prepared Ru0.8Sb0.2O2 achieves efficient PEMWE performance under industrial conditions. General mechanism analysis shows that the enhanced proton transport in the asymmetric Ru-O-M unit provides a new working pathway for acidic OER, breaking the scaling relationship without sacrificing stability.

Boron modification promoting electrochemical surface reconstruction of NiFe-LDH for efficient and stable freshwater/seawater oxidation catalysis

Transition metal-based electrocatalysts generally take place surface reconstruction in alkaline conditions, but little is known about how to improve the reconstruction to a highly active oxyhydroxide surface for an efficient and stable oxygen evolution reaction (OER). Herein, we develop a strategy to accelerate surface reconstruction by combining boron modification and cyclic voltammetry (CV) activation. Density functional theory calculations and in-situ/ex-situ characterizations indicate that both B-doping and electrochemical activation can reduce the energy barrier and contribute to the surface evolution into highly active oxyhydroxides. The formed oxyhydroxide active phase can tune the electronic configuration and boost the OER process. The reconstructed catalyst of CV-B-NiFe-LDH displays excellent alkaline OER performance in freshwater, simulated seawater, and natural seawater with low overpotentials at 100 mA cm-2 (η100: 219, 236, and 255 mV, respectively) and good durability. This catalyst also presents outstanding Cl- corrosion resistance in alkalized seawater electrolytes. The CV-B-NiFe-LDH||Pt/C electrolyzer reveals prominent performance for alkalized freshwater/seawater splitting. This study provides a guideline for developing advanced OER electrocatalysts by promoting surface reconstruction.

Dual-site OER mechanism exploration through regulating asymmetric multi-site NiOOH

Asymmetric nickel oxyhydroxide (NiOOH) possesses multi-OH and O active sites on different surfaces, (001) and (001̄), which possibly causes a complicated catalytic process. Density functional theory (DFT) calculations reveal that the unconventional dual-site mechanism (UDSM) of the oxygen evolution reaction (OER) on NiOOH (001) and (001̄) exhibits significantly lower overpotentials of 0.80 and 0.77 V, compared to 1.24 and 1.62 V for the single-site mechanism (SSM), respectively. Through chemical doping or heterojunction modifications, the constructed NiOOH@FeOOH (001̄) heterojunction reduces the thermodynamic overpotential to 0.49 V from original 0.77 V undergoing the UDSM. Although Fe/Co-doping or physical compression yield similar or slightly higher overpotentials and are not conductive to facilitating the OER process by the UDSM, all dual-site paths exhibit obviously lower overpotentials than the SSM for pristine and regulated NiOOH (001) and (001̄) from the whole viewpoint. This work identifies a more reasonable and efficient dual-site OER mechanism, which is expected to help the rational design of highly-efficient electrocatalysts.

Potassium fluoride-induced FeOOH formation in NiFe oxalate for improved oxygen evolution performance

Our study introduces a facile synthetic route for the in situ formation of nickel (Ni)-iron (Fe) oxyhydroxide from NiFe oxalate. By adding potassium fluoride (KF) to the synthetic solution, we achieved a predominant surface distribution of Fe (>80 at%) while limiting its bulk incorporation compared to solutions without KF. Operando Raman spectroscopy analysis confirms that the enriched Fe predominantly exists as FeOOH. Our optimized catalyst demonstrates significant efficiency, achieving a current density of 10 mA cm-2 at a notably low overpotential of 226 mV.

Oxygen Isotopologues Resolved from Water Oxidation Electrocatalysis by Electron Paramagnetic Resonance Spectroscopy

Electrocatalytic water oxidation is a key transformation in many strategies designed to harness solar energy and store it as chemical fuels. Understanding the mechanism(s) of the best electrocatalysts for water oxidation has been a fundamental chemical challenge for decades. Here, we quantitate evolved dioxygen isotopologue composition via gas-phase EPR spectroscopy to elucidate the mechanisms of water oxidation on metal oxide electrocatalysts with high precision. Isotope fractionation is paired with computational and kinetic modeling, showing that this technique is sensitive enough to differentiate O-O bond-forming steps. Strong agreement between experiment and theory indicates that for the nickel-iron layered double hydroxide─one of the best earth-abundant electrocatalysts to be studied─water oxidation proceeds via a dioxo coupling mechanism to form a side-bound peroxide rather than a hydroxide attack to form an end-bound peroxide.

Balance between FeIV-NiIV synergy and Lattice Oxygen Contribution for Accelerating Water Oxidation

Hydrogen obtained from electrochemical water splitting is the most promising clean energy carrier, which is hindered by the sluggish kinetics of the oxygen evolution reaction (OER). Thus, the development of an efficient OER electrocatalyst using nonprecious 3d transition elements is desirable. Multielement synergistic effect and lattice oxygen oxidation are two well-known mechanisms to enhance the OER activity of catalysts. The latter is generally related to the high valence state of 3d transition elements leading to structural destabilization under the OER condition. We have found that Al doping in nanosheet Ni-Fe hydroxide exhibits 2-fold advantage: (1) a strong enhanced OER activity from 277 mV to 238 mV at 10 mA cm-2 as the Ni valence state increases from Ni3.58+ to Ni3.79+ observed from in situ X-ray absorption spectra. (2) Operational stability is strengthened, while weakness is expected since the increased NiIV content with 3d8L2 (L denotes O 2p hole) would lead to structural instability. This contradiction is attributed to a reduced lattice oxygen contribution to the OER upon Al doping, as verified through in situ Raman spectroscopy, while the enhanced OER activity is interpreted as an enormous gain in exchange energy of FeIV-NiIV, facilitated by their intersite hopping. This study reveals a mechanism of Fe-Ni synergy effect to enhance OER activity and simultaneously to strengthen operational stability by suppressing the contribution of lattice oxygen.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

Accurately Modulating Binuclear Metal Nodes of Metal-Organic Frameworks for Oxygen Evolution

The accurate manipulation of the species and locations of catalytic centers is crucial for regulating the catalytic activity of catalysts, which is essential for their efficient design and development. Metal-organic frameworks (MOFs) with coordinated metal sites are ideal materials for investigating the origin of catalytic activity. In this study, we present a Ni2-MOF featuring novel Ni-based binuclear nodes with open metal sites (OMSs) and saturated metal sites (SMSs). The nickel was replaced by iron to obtain Ni1Fe1-MOF. In the electrocatalytic oxygen evolution reaction, Ni1Fe1-MOF exhibited an overpotential and Tafel slope of 370 mV@10 mA cm-2 and 87.06 mV dec-1, respectively, which were higher than those of Ni2-MOF (283 mV@10 mA cm-2 and 39.59 mV dec-1, respectively), demonstrating the superior performance of Ni1Fe1-MOF. Furthermore, theoretical calculations revealed that iron as an SMS may effectively regulate the electronic structure of the nickel catalytic center to reduce the free energy barrier ΔG*OH of the rate-determining step.

Promoted Overall Water Splitting Catalytic Activity and Durability of Ni3Fe Alloy by Designing N-Doped Carbon Encapsulation

Combining an electrochemically stable material onto the surface of a catalyst can improve the durability of a transition metal catalyst, and enable the catalyst to operate stably at high current density. Herein, the contribution of the N-doped carbon shell (NCS) to the electrochemical properties is evaluated by comparing the characteristics of the Ni3Fe@NCS catalyst with the N-doped carbon shell, and the Ni3Fe catalyst. The synthesized Ni3Fe@NCS catalyst has a distinct overpotential difference from the Ni3Fe catalyst (ηOER = 468.8 mV, ηHER = 462.2 mV) at (200 and -200) mA cm-2 in 1 m KOH. In stability test at (10 and -10) mA cm-2, the Ni3Fe@NCS catalyst showed a stability of (95.47 and 99.6)%, while the Ni3Fe catalyst showed a stability of (72.4 and 95.9)%, respectively. In addition, the in situ X-ray Absorption Near Edge Spectroscopy (XANES) results show that redox reaction appeared in the Ni3Fe catalyst by applying voltages of (1.7 and -0.48) V. The decomposition of nickel and iron due to the redox reaction is detected as a high ppm concentration in the Ni3Fe catalyst through Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) analysis. This work presents the strategy and design of a next-generation electrochemical catalyst to improve the electrocatalytic properties and stability.

Bias distribution and regulation in photoelectrochemical overall water-splitting cells

The water oxidation half-reaction at anodes is always considered the rate-limiting step of overall water splitting (OWS), but the actual bias distribution between photoanodes and cathodes of photoelectrochemical (PEC) OWS cells has not been investigated systematically. In this work, we find that, for PEC cells consisting of photoanodes (nickel-modified n-Si [Ni/n-Si] and α-Fe2O3) with low photovoltage (Vph < 1 V), a large portion of applied bias is exerted on the Pt cathode for satisfying the hydrogen evolution thermodynamics, showing a thermodynamics-controlled characteristic. In contrast, for photoanodes (TiO2 and BiVO4) with Vph > 1 V, the bias required for cathode activation can be significantly reduced, exhibiting a kinetics-controlled characteristic. Further investigations show that the bias distribution can be regulated by tuning the electrolyte pH and using alternative half-reaction couplings. Accordingly, a volcano plot is presented for the rational design of the overall reactions and unbiased PEC cells. Motivated by this, an unbiased PEC cell consisting of a simple Ni/n-Si photoanode and Pt cathode is assembled, delivering a photocurrent density of 5.3 ± 0.2 mA cm-2.

Organic Upgrading through Photoelectrochemical Reactions: Toward Higher Profits

Aqueous photoelectrochemical (PEC) cells have long been considered a promising technology to convert solar energy into hydrogen. However, the solar-to-H2 (STH) efficiency and cost-effectiveness of PEC water splitting are significantly limited by sluggish oxygen evolution reaction (OER) kinetics and the low economic value of the produced O2 , hindering the practical commercialization of PEC cells. Recently, organic upgrading PEC reactions, especially for alternative OERs, have received tremendous attention, which improves not only the STH efficiency but also the economic effectiveness of the overall reaction. In this review, PEC reaction fundamentals and reactant-product cost analysis of organic upgrading reactions are briefly reviewed, recent advances made in organic upgrading reactions, which are categorized by their reactant substrates, such as methanol, ethanol, glycol, glycerol, and complex hydrocarbons, are then summarized and discussed. Finally, the current status, further outlooks, and challenges toward industrial applications are discussed.

Lewis Acid Driving Asymmetric Interfacial Electron Distribution to Stabilize Active Species for Efficient Neutral Water Oxidation

Neutral oxygen evolution reaction (OER) with unique reactive environments exhibits extremely slow reaction kinetics, posing significant challenges in the design of catalysts. Herein, a built-in electric field between the tungstate (Ni-FeWO4 ) with adjustable work function and Lewis acid WO3 is elaborately constructed to regulate asymmetric interfacial electron distribution, which promotes electron accumulation of Fe sites in the tungstate. This decelerates the rapid dissolution of Fe under the OER potentials, thereby retaining the active hydroxyl oxide with the optimized OER reaction pathway. Meanwhile, Lewis acid WO3 enhances hydroxyl adsorption near the electrode surface to improve mass transfer. As expected, the optimized Ni-FeWO4 @WO3 /NF self-supporting electrode achieves a low overpotential of 235 mV at 10 mA cm-2 in neutral media and maintains stable operation for 200 h. Furthermore, the membrane electrode assembly constructed by such self-supporting electrode exhibits robust stability for 250 h during neutral seawater electrolysis. This work deepens the understanding of the reconstruction of OER catalysts in neutral environments and paves the way for development of the energy conversion technologies.

Modulating nickel-iron active species via dealloying to boost the oxygen evolution reaction

The surface structure and composition of pre-catalysts play a critical role in the surface reconstruction process toward active species during the anodic oxygen evolution reaction (OER). Surface modified methods can accelerate the OER process of alloy ribbons, but the understanding of pre-catalysts and the structure/reactivity of the reconstruction (active) species is still insufficient. Herein, we report a two-step dealloyed Ni-Fe-P alloy ribbon as a highly efficient OER electrocatalyst. By adjusting the surface-derived component, we could regulate Ni/Fe hydroxide active species on the Ni-Fe-P alloy ribbon, enhancing the OER performance. The oxidation and release of P driven by dealloying plays a key role in constructing optimal β-NiOOH/FeOOH catalytic species on Ni-Fe-P. The optimal β-NiOOH/FeOOH active species enables Ni-Fe-P alloy to obtain a 104 mV of reduction in overpotential (at 10 mA cm-2) and a 78-fold increase in current density (at overpotential: 300 mV) compared to undealloyed Ni-Fe-P. Our work provides valuable insights into the relationship between the surface structure/composition of alloy bulk electrocatalysts and surface-reconstructed species and a rational design of a surface treatment process.

Site-specific metal-support interaction to switch the activity of Ir single atoms for oxygen evolution reaction

The metal-support interactions (MSI) could greatly determine the electronic properties of single-atom catalysts, thus affecting the catalytic performance. However, the typical approach to regulating MSI usually suffers from interference of the variation of supports or sacrificing the stability of catalysts. Here, we effectively regulate the site-specific MSI of Ir single atoms anchored on Ni layered double hydroxide through an electrochemical deposition strategy. Cathodic deposition drives Ir atoms to locate at three-fold facial center cubic hollow sites with strong MSI, while anodic deposition drives Ir atoms to deposit onto oxygen vacancy sites with weak MSI. The mass activity and intrinsic activity of Ir single-atom catalysts with strong MSI towards oxygen evolution reaction are 19.5 and 5.2 times that with weak MSI, respectively. Mechanism study reveals that the strong MSI between Ir atoms and the support stimulates the activity of Ir sites by inducing the switch of active sites from Ni sites to Ir sites and optimizes the adsorption strength of intermediates, thereby enhancing the activity.

Ni-modified FeOOH integrated electrode by self-source corrosion of nickel foam for high-efficiency electrochemical water oxidation

The construction and application of efficient iron oxyhydroxide (FeOOH) is still a challenge in the field of energy conversion. Here, a facile preparation method is developed by directly utilizing commercialized nickel foams (NF) as the nickel source and the supporting framework, as well as the ingenious use of etching effect originating from acidic medium in the process of iron salt hydrolysis. As a result, a Ni-modulated FeOOH integrated electrode (Ni-FeOOH/NF) is obtained. Unexpectedly, the implementation of our scheme effectively activates the catalytic intrinsic activity of FeOOH, successfully transforming the inert NF into an integrated electrode with high oxygen evolution reaction (OER) performance. Specifically, the Ni-FeOOH/NF exhibits the overpotential of 277 mV (@100 mA cm-2) and superior stability for OER. Additionally, the as-prepared Ni-FeOOH/NF electrode could also operate steadily for OER in alkaline adjusted saline water. Our research provides a new idea for the preparation of satisfactory Fe-based metal materials as OER electrocatalysts.

Cooperative Fe sites on transition metal (oxy)hydroxides drive high oxygen evolution activity in base

Fe-containing transition-metal (oxy)hydroxides are highly active oxygen-evolution reaction (OER) electrocatalysts in alkaline media and ubiquitously form across many materials systems. The complexity and dynamics of the Fe sites within the (oxy)hydroxide have slowed understanding of how and where the Fe-based active sites form-information critical for designing catalysts and electrolytes with higher activity and stability. We show that where/how Fe species in the electrolyte incorporate into host Ni or Co (oxy)hydroxides depends on the electrochemical history and structural properties of the host material. Substantially less Fe is incorporated from Fe-spiked electrolyte into Ni (oxy)hydroxide at anodic potentials, past the nominally Ni2+/3+ redox wave, compared to during potential cycling. The Fe adsorbed under constant anodic potentials leads to impressively high per-Fe OER turn-over frequency (TOFFe) of ~40 s-1 at 350 mV overpotential which we attribute to under-coordinated "surface" Fe. By systematically controlling the concentration of surface Fe, we find TOFFe increases linearly with the Fe concentration. This suggests a changing OER mechanism with increased Fe concentration, consistent with a mechanism involving cooperative Fe sites in FeOx clusters.

Grain Boundary Effects of Hierarchical Ni-Fe (Oxy)hydroxide Nanosheets in Water Oxidation

The robust and scalable oxygen evolution electrocatalysts that can deliver high current densities at low applied potential is a great challenge for the large-scale industrial application in hydrogen production. Here, the preparation of a grain-boundary-rich Ni-Fe (oxy)hydroxide catalyst on Ni foam is reported using a scalable coating approach followed by a chemical precipitating treatment. This facile method effectively assembles the hierarchical Ni-Fe (oxy)hydroxide nanosheet in the ultrasmall crystalline domains (<4 nm) with rich grain boundaries. The hierarchical nanosheet structure with the grain boundaries provides more accessible catalytic sites, facile charge, and mass transfer. Benefiting from the abundant grain boundaries in the hierarchical nanosheets, the as-prepared Ni-Fe (oxy)hydroxide electrodes deliver current densities of 500 and 1000 mA cm-2 at overpotentials of only 278 and 296 mV for the oxygen evolution reaction. The prepared electrode also exhibits long-term durability at a high current density in alkaline conditions.

Active oxygen species mediate the iron-promoting electrocatalysis of oxygen evolution reaction on metal oxyhydroxides

Iron is an extraordinary promoter to impose nickel/cobalt (hydr)oxides as the most active oxygen evolution reaction catalysts, whereas the synergistic effect is actively debated. Here, we unveil that active oxygen species mediate a strong electrochemical interaction between iron oxides (FeOxHy) and the supporting metal oxyhydroxides. Our survey on the electrochemical behavior of nine supporting metal oxyhydroxides (M(O)OH) uncovers that FeOxHy synergistically promotes substrates that can produce active oxygen species exclusively. Tafel slopes correlate with the presence and kind of oxygen species. Moreover, the oxygen evolution reaction onset potentials of FeOxHy@M(O)OH coincide with the emerging potentials of active oxygen species, whereas large potential gaps are present for intact M(O)OH. Chemical probe experiments suggest that active oxygen species could act as proton acceptors and/or mediators for proton transfer and/or diffusion in cooperative catalysis. This discovery offers a new insight to understand the synergistic catalysis of Fe-based oxygen evolution reaction electrocatalysts.

Bioinspired trimesic acid anchored electrocatalysts with unique static and dynamic compatibility for enhanced water oxidation

Layered double hydroxides are promising candidates for the electrocatalytic oxygen evolution reaction. Unfortunately, their catalytic kinetics and long-term stabilities are far from satisfactory compared to those of rare metals. Here, we investigate the durability of nickel-iron layered double hydroxides and show that ablation of the lamellar structure due to metal dissolution is the cause of the decreased stability. Inspired by the amino acid residues in photosystem II, we report a strategy using trimesic acid anchors to prepare the subsize nickel-iron layered double hydroxides with kinetics, activity and stability superior to those of commercial catalysts. Fundamental investigations through operando spectroscopy and theoretical calculations reveal that the superaerophobic surface facilitates prompt release of the generated O2 bubbles, and protects the structure of the catalyst. Coupling between the metals and coordinated carboxylates via C‒O‒Fe bonding prevents dissolution of the metal species, which stabilizes the electronic structure by static coordination. In addition, the uncoordinated carboxylates formed by dynamic evolution during oxygen evolution reaction serve as proton ferries to accelerate the oxygen evolution reaction kinetics. This work offers a promising way to achieve breakthroughs in oxygen evolution reaction stability and dynamic performance by introducing functional ligands with static and dynamic compatibilities.

An amorphous Ni-Fe catalyst for electrocatalytic dehydrogenation of alcohols to value-added chemicals

As for the hydrogen production process via electrocatalytic water splitting, the green and sustainable electro-oxidation of organic molecules at the anode is thermodynamically more favourable than the oxygen evolution reaction (OER). Here, we proposed for the first time to replace the OER process by the oxidation of N-Boc-4-piperidine methanol (BPM), via a parallel reaction, which finally leads to the green production of N-Boc-4-piperidine carboxaldehyde (BPC). The amorphous NiFeO(OH) nanospheres with rich valence states were adopted as the anode catalyst, with creation of more active sites. The gas chromatography results showed that nearly all the BPM converted to BPC after 15 h reaction. The electrochemical tests showed that the Faraday efficiency (FE) approaches nearly 100% when the charge transfer is approximately equal to the theoretical charge. This work reports a new process for the alcohol oxidation, providing a valuable green organic synthesis process.

Nanoflower-like high-entropy Ni-Fe-Cr-Mn-Co (oxy)hydroxides for oxygen evolution

High-entropy materials (HEMs) have potential application value in electrocatalytic water splitting because of their unique alloy design concept and significant mixed entropy effect. Here, we synthesize a high-entropy Ni-Fe-Cr-Mn-Co (oxy)hydroxide on nickel foam (NF) by a solvothermal method. The flower-like structure of FeNiCrMnCoOOH/NF can provide abundant active sites, thus improving the oxygen evolution reaction (OER) activity. In 1 M KOH, the FeNiCrMnCoOOH/NF shows an ultra-low overpotential (η10) of 201 mV for the OER, superior to FeNiCrMnAlOOH/NF, FeNiCrMnCuOOH/NF, FeNiCrMnMoOOH/NF, and FeNiCrMnCeOOH/NF. In addition, it exhibits a low η10 of 223 mV in 0.5 M NaCl + 1 M KOH and excellent stability. Electrochemical impedance spectroscopy measurements indicate that the synergistic effect between multiple metals accelerates charge transfer, while in situ Raman measurements reveal that NiOOH is a key active species for the OER. This work is of great significance for the construction of high-entropy (oxy)hydroxides for seawater electrolysis.

Spatially and Chemically Resolved Visualization of Fe Incorporation into NiO Octahedra during the Oxygen Evolution Reaction

The activity of Ni (hydr)oxides for the electrochemical evolution of oxygen (OER), a key component of the overall water splitting reaction, is known to be greatly enhanced by the incorporation of Fe. However, a complete understanding of the role of cationic Fe species and the nature of the catalyst surface under reaction conditions remains unclear. Here, using a combination of electrochemical cell and conventional transmission electron microscopy, we show how the surface of NiO electrocatalysts, with initially well-defined surface facets, restructures under applied potential and forms an active NiFe layered double (oxy)hydroxide (NiFe-LDH) when Fe3+ ions are present in the electrolyte. Continued OER under these conditions, however, leads to the creation of additional FeOx aggregates. Electrochemically, the NiFe-LDH formation correlates with a lower onset potential toward the OER, whereas the formation of the FeOx aggregates is accompanied by a gradual decrease in the OER activity. Complementary insight into the catalyst near-surface composition, structure, and chemical state is further extracted using X-ray photoelectron spectroscopy, operando Raman spectroscopy, and operando X-ray absorption spectroscopy together with measurements of Fe uptake by the electrocatalysts using time-resolved inductively coupled plasma mass spectrometry. Notably, we identified that the catalytic deactivation under stationary conditions is linked to the degradation of in situ-created NiFe-LDH. These insights exemplify the complexity of the active state formation and show how its structural and morphological evolution under different applied potentials can be directly linked to the catalyst activation and degradation.

MOF-Derived CoSe2@NiFeOOH Arrays for Efficient Oxygen Evolution Reaction

Water electrolysis is a compelling method for the production of environmentally friendly hydrogen, minimizing carbon emissions. The electrolysis of water heavily relies on an effective and steady oxygen evolution reaction (OER) taking place at the anode. Herein, we introduce a highly promising catalyst for OER called CoSe2@NiFeOOH arrays, which are supported on nickel foam. This catalyst, referred to as CoSe2@NiFeOOH/NF, is fabricated through a two-step process involving the selenidation of a Co-based porous metal organic framework and subsequent electrochemical deposition on nickel foam. The CoSe2@NiFeOOH/NF catalyst demonstrates outstanding activity for the OER in an alkaline electrolyte. It exhibits a low overpotential (η) of 254 mV at 100 mA cm-2, a small Tafel slope of 73 mV dec-1, and excellent high stability. The good performance of CoSe2@NiFeOOH/NF can be attributed to the combination of the high conductivity of the inner layer and the synergistic effect between CoSe2 and NiFeOOH. This study offers an effective method for the fabrication of highly efficient catalysts for an OER.

Manipulating electron redistribution induced by asymmetric coordination for electrocatalytic water oxidation at a high current density

Electronic structure manipulation with regard to active site coordination is an effective strategy to improve the electrocatalytic oxygen evolution reaction (OER) activity. Herein, we present the structure-activity relationship between oxygen-atom-mediated electron rearrangement and active site coordination asymmetry. Ni²⁺ ions are introduced to FeWO₄ on Ni foam (NF) via self-substitution to break the symmetry of the FeO₆ octahedron and regulate d-electron structure of Fe sites. Structural regulation optimizes the adsorption energy of hydroxyl on the Fe sites and promotes the partial formation of hydroxyl oxide with high OER activity on the tungstate surface. Fe_0.53Ni_0.47WO₄/NF with the asymmetric FeO₆ octahedron of Fe sites can achieve an ultralow overpotential of 170 mV at 10 mA cm^-2 and 240 mV at 1000 mA cm^-2 with robust stability for 500 h at high current density under alkaline conditions. This research develops novel electrocatalysts with impressive OER performance and provides new insights into the design of highly active catalytic systems.

Oxyanion Engineering Suppressed Iron Segregation in Nickel-Iron Catalysts Toward Stable Water Oxidation

Nickel-iron catalysts represent an appealing platform for electrocatalytic oxygen evolution reaction (OER) in alkaline media because of their high adjustability in components and activity. However, their long-term stabilities under high current density still remain unsatisfactory due to undesirable Fe segregation. Herein, a nitrate ion (NO₃ ^- ) tailored strategy is developed to mitigate Fe segregation, and thereby improve the OER stability of nickel-iron catalyst. X-ray absorption spectroscopy combined with theoretical calculations indicate that introducing Ni₃ (NO₃ )₂ (OH)₄ with stable NO₃ ^- in the lattice is conducive to constructing the stable interface of FeOOH/Ni₃ (NO₃ )₂ (OH)₄ via the strong interaction between Fe and incorporated NO₃ ^- . Time of flight secondary ion mass spectrometry and wavelet transformation analysis demonstrate that the NO₃ ^- tailored nickel-iron catalyst greatly alleviates Fe segregation, exhibiting a considerably enhanced long-term stability with a six-fold improvement over FeOOH/Ni(OH)₂ without NO₃ ^- modification. This work represents a momentous step toward regulating Fe segregation for stabilizing the catalytic performances of nickel-iron catalysts.

Amorphous dominated metal hydroxide-organic framework with compositional and structural heterogeneity for enhancing anodic electro-oxidation reactions

Inorganic-organic hybrids are promising anode catalysts to realize high activity and stability. Herein, an amorphous-dominated transition metal hydroxide-organic framework (MHOF) with isostructural mixed-linker was successfully synthesized on nickel foam (NF) substrate. The designed IML₂₄-MHOF/NF exhibited remarkable electrocatalytic activity with an ultralow overpotential of 271 mV for oxygen evolution reaction (OER) and a potential of 1.29 V vs. reversible hydrogen electrode for urea oxidation reaction (UOR) at 10 mA·cm^-2. Furthermore, the IML₂₄-MHOF/NF||Pt-C cell required only 1.31 V for urea electrolysis at 10 mA·cm^-2, which was much smaller than traditional water splitting (1.50 V). When coupled with UOR, the hydrogen yield rate was faster (1.04 mmol·h^-1) than with OER (0.32 mmol·h^-1) at 1.6 V. The structure characterizations, together with operando monitoring, including operando Raman, Fourier transform infrared, electrochemical impedance spectroscopy, and alcohol molecules probe, revealed that: (1) amorphous IML₂₄-MHOF/NF prefers self-adaptive reconstruction into active intermediate species against the external stimulus; (2) pyridine-3,5-dicarboxylate-incorporation into parent framework reconfigures electronic structure of system, thus mediating the absorption of oxygen-containing reactants during anodic oxidation reactions, such as O* and COO*. This work provides a new approach for boosting the catalytic activity of anodic electro-oxidation reactions by trimming the structure of MHOF-based catalysts.

Operando spectroscopies capturing surface reconstruction and interfacial electronic regulation by FeOOH@Fe2O3@Ni(OH)2 heterostructures for robust oxygen evolution reaction

Developing high-performance and low-cost electrocatalysts for oxygen evolution reaction (OER) and understanding the phase evolution in the catalytic process are vital to improving the overall efficiency of electrochemical water splitting. Herein, a hybrid heterogeneous FeOOH@Fe₂O₃@Ni(OH)₂ electrocatalyst with robust OER intrinsic activity and a low overpotential of 269 mV to obtain a current density of 100 mA cm^-2 and a Tafel slope value of 60.15 mV dec^-1 is effectively prepared. The dynamic surface evolution has been detected by in-situ Raman spectroscopy, which exposes that FeOOH@Fe₂O₃@Ni(OH)₂ is reconstituted as Ni(Fe)OOH demonstrated as catalytically active species under high potential. X-ray photoelectron spectroscopy analysis indicates that partial electrons of Ni in the heterogeneous interface transfer to Fe. Furthermore, partial Fe doping of NiOOH under high potential accompanied by the oxidized Ni³⁺ with optimized d-orbit electronic configuration for nearly unity e_g occupancy results in proper chemisorption bonding strength for oxygen reaction intermediates and is conducive to enhancing OER reaction kinetics. This work provides ideas that multicomponent heterostructure can adjust the electronic structure of iron and nickel to enhance the intrinsic activity of OER, which could help with the design and synthesis of high-performance OER catalysts used in energy storage and conversion.

Unveiling the role of defects in iron oxyhydroxide for oxygen evolution

Development of earth-abundant and robust oxygen evolution reaction (OER) catalysts is imperative for cost-effective hydrogen production via water electrolysis. Herein, we report ultrafine iron (oxy)hydroxide nanoparticles with average particle size of 2.6 nm and abundant surface defects homogeneously supported on oleum-treated graphite (FeO_x(n)@HG-T), providing abundant active sites for the OER. The optimal FeO_x(0.03)@HG-110 exhibits high electrocatalytic OER activity and excellent stability. Electrochemical testing results and theoretical calculations reveal that the outstanding OER activity of FeO_x(0.03)@HG-110 is due to its stronger charge transfer ability and lower OER energy barrier than defect-free FeO_x nanoparticles. This work demonstrates that the OER performance of oxyhydroxide-based electrocatalysts can be improved by surface defect engineering.

Unraveling a bifunctional mechanism for methanol-to-formate electro-oxidation on nickel-based hydroxides

For nickel-based catalysts, in-situ formed nickel oxyhydroxide has been generally believed as the origin for anodic biomass electro-oxidations. However, rationally understanding the catalytic mechanism still remains challenging. In this work, we demonstrate that NiMn hydroxide as the anodic catalyst can enable methanol-to-formate electro-oxidation reaction (MOR) with a low cell-potential of 1.33/1.41 V at 10/100 mA cm^-2, a Faradaic efficiency of nearly 100% and good durability in alkaline media, remarkably outperforming NiFe hydroxide. Based on a combined experimental and computational study, we propose a cyclic pathway that consists of reversible redox transitions of Ni^II-(OH)₂/Ni^III-OOH and a concomitant MOR. More importantly, it is proved that the Ni^III-OOH provides combined active sites including Ni^III and nearby electrophilic oxygen species, which work in a cooperative manner to promote either spontaneous or non-spontaneous MOR process. Such a bifunctional mechanism can well account for not only the highly selective formate formation but also the transient presence of Ni^III-OOH. The different catalytic activities of NiMn and NiFe hydroxides can be attributed to their different oxidation behaviors. Thus, our work provides a clear and rational understanding of the overall MOR mechanism on nickel-based hydroxides, which is beneficial for advanced catalyst design.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Controlled synthesis of Crx-FeCo2P nanoarrays on nickel foam for overall urea splitting

Urea splitting is a highly promising technology for hydrogen production to cope with the fossil energy crisis, which requires the development of catalysts with high electrocatalytic activity. In this article, Cr_x-FeCo₂P/NF catalysts were synthesized by hydrothermal and low-temperature phosphorylation and used in the overall urea splitting process. Cr_0.15-FeCo₂P/NF and Cr_0.1-FeCo₂P/NF exhibited excellent urea oxidation reaction (UOR) activity (potential of 1.355 V at 100 mA cm^-2) and hydrogen evolution reaction (HER) activity (overpotential of 173 mV at 10 mA cm^-2) in 0.5 M urea solution containing 1 M KOH. In the assembled Cr_0.15-FeCo₂P/NF//Cr_0.1-FeCo₂P/NF electrolytic cell, only a small voltage of 1.50 V is needed to reach 10 mA cm^-2. Density functional theory (DFT) calculation results demonstrate that an appropriate amount of Cr doping accelerates the kinetic performance of hydrogen production as well as improving the metallic properties of the electrode.

Regulating Complex Transition Metal Oxyhydroxides Using Ni3S2: 3D NiCoFe(oxy)hydroxide/Ni3S2/Ni Foam for an Efficient Alkaline Oxygen Evolution Reaction

In electrochemical decomposition of water, the slow kinetics of the anodic oxygen evolution reaction (OER) is a challenge for efficient hydrogen production. Heterointerface engineering is a desirable way to rationally design electrocatalysts for the OER. Herein, we designed and fabricated a nanoparticle flower-like NiCoFe(oxy)hydroxide catalyst in situ grown on the surface of Ni₃S₂/NF to construct a heterojunction via combining hydrothermal and electrodeposition methods. The heterostructure exhibits a smaller overpotential of 254 mV at a large current density of 100 mA cm^-2 in 1 M KOH than that of pristine NiCoFeO_xH_y/NF (356 mV) and Ni₃S₂/NF (471 mV). Tafel and electrochemical impedance spectroscopy further showed a favorable kinetics during electrolysis. The role of the substrate Ni₃S₂ was explored via density functional theory calculations. Our calculations found that SO_x on the Ni₃S₂ surface is a strong nucleophilic group and the synergy effect between Fe and SO_x could break *OOH to reduce the Gibbs energy. We also found that the contribution of SO_x in sulfates to the OER activity could be negligible. Furthermore, a series of comparative samples were prepared to test this synergy effect. Our experiments indicated that the introduction of Ni₃S₂ is beneficial. The present contribution provides an important helpful insight into the design and fabrication of novel and highly efficient heterostructure electrocatalysts by introducing nucleophilic groups at the interface.

Durable Nickel-Iron (Oxy)hydroxide Oxygen Evolution Electrocatalysts through Surface Functionalization with Tetraphenylporphyrin

NiFe-based oxides are one of the best-known active oxygen evolution electrocatalysts. Unfortunately, they rapidly lost performance in Fe-purified KOH during the reaction. Herein, tetraphenylporphyrin (TPP) was loaded on a catalyst/electrolyte interface to alleviate the destabilization of NiFe (oxy)hydroxide. We propose that the degradation occurs primarily due to the release of thermodynamically unstable Fe. TPP acts as a protective layer and suppresses the dissolution of hydrated metal at the catalyst/electrolyte interface. In the electric double layer, the nonpolar TPP layer on the NiFe surface also invigorates the redeposition of the active site, Fe, which leads to prolonging the lifetime of NiFe. The TPP-coated NiFe was demonstrated in anion exchange membrane water electrolysis, where hydrogen was generated at a rate of 126 L h^-1 for 115 h at a 1.41 mV h^-1 degradation rate. Consequently, TPP is a promising protective layer that could stabilize oxygen evolution electrocatalysts.

A Unique NiOOH@FeOOH Heteroarchitecture for Enhanced Oxygen Evolution in Saline Water

The development of highly efficient non-precious metal electrocatalysts for the oxygen evolution reaction (OER) in low-grade or saline water is currently of great importance for the large-scale production of hydrogen. In this study, by using an electrochemical activation pretreatment, metal oxy(hydroxide) nanosheet structures derived from self-supported nickel-iron phosphide and nitride nanoarrays grown on Ni foam are successfully fabricated for OER catalysis in saline water. It is demonstrated that the different NiOOH and NiOOH@FeOOH (NiOOH grown on FeOOH) structures are generated from nickel-iron nitride and phosphide, respectively, after electrochemical activation. In particular, the NiOOH@FeOOH heteroarchitecture shows outstanding electrocatalytic performance with an ultralow overpotential of 292 mV to drive the current density of 500 mA cm^-2 . An unconventional dual-sites mechanism (UDSM) is proposed to address the OER process on NiOOH@FeOOH and show that the FeOOH underlayer plays a critical role regarding the enhanced OER activity of NiOOH. The new possible UDSM involving two reaction sites presents a different understanding of the OER process on multi-OH layer complexes, which is expected to guide the design of heteroarchitecture electrocatalysts.

Optimized NiFe-Based Coordination Polymer Catalysts: Sulfur-Tuning and Operando Monitoring of Water Oxidation

In-depth insights into the structure-activity relationships and complex reaction mechanisms of oxygen evolution reaction (OER) electrocatalysts are indispensable to efficiently generate clean hydrogen through water electrolysis. We introduce a convenient and effective sulfur heteroatom tuning strategy to optimize the performance of active Ni and Fe centers embedded into coordination polymer (CP) catalysts. Operando monitoring then provided the mechanistic understanding as to how exactly our facile sulfur engineering of Ni/Fe-CPs optimizes the local electronic structure of their active centers to facilitate dioxygen formation. The high OER activity of our optimized S-R-NiFe-CPs outperforms the most recent NiFe-based OER electrocatalysts. Specifically, we start from oxygen-deprived O_d-R-NiFe-CPs and transform them into highly active Ni/Fe-CPs with tailored sulfur coordination environments and anionic deficiencies. Our operando X-ray absorption spectroscopy analyses reveal that sulfur introduction into our designed S-R-NiFe-CPs facilitates the formation of crucial highly oxidized Ni⁴⁺ and Fe⁴⁺ species, which generate oxygen-bridged Ni^IV-O-Fe^IV moieties that act as the true OER active intermediates. The advantage of our sulfur-doping strategy for enhanced OER is evident from comparison with sulfur-free O_d-R-NiFe-CPs, where the formation of essential high-valent OER intermediates is hindered. Moreover, we propose a dual-site mechanism pathway, which is backed up with a combination of pH-dependent performance data and DFT calculations. Computational results support the benefits of sulfur modulation, where a lower energy barrier enables O-O bond formation atop the S-Ni^IV-O-Fe^IV-O moieties. Our convenient anionic tuning strategy facilitates the formation of active oxygen-bridged metal motifs and can thus promote the design of flexible and low-cost OER electrocatalysts.

Single-Step Synthesis of Fe-Doped Ni3S2/FeS2 Nanocomposites for Highly Efficient Oxygen Evolution Reaction

Due to the sluggish kinetic reaction, the electrolytic oxygen evolution reaction (OER) is one of the obstacles in driving overall water splitting for green hydrogen production. In this study, we demonstrate a strategy to improve the OER performance of Ni₃S₂. The effect of addition of different FeCl₂ contents during the hydrothermal process on the OER activity is systematically evaluated. We found that all samples upon the addition of FeCl₂ produced Fe-doped Ni₃S₂ and FeS₂ to form a nanocomposite. Their OER performances strongly depend on the amount of FeCl₂, where the NSF-0.25 catalyst with 0.25 mmol FeCl₂ added during the hydrothermal synthesis shows the best OER performance. Its overpotential was 230 mV versus RHE and it achieves a high current density of 100 mA·cm^-2, which was much lower than that of pristine Ni₃S₂ (320 mV) or RuO₂ (370 mV) as the benchmark OER catalyst. The postcharacterizations reveal that NSF-0.25 has gone through an in situ phase transformation into an Fe-NiOOH phase during the OER test. This study presents a simple method and a low-cost material to improve the OER performance with in situ formation of oxyhydroxide.

In Situ Reconstructed Zn doped Fex Ni(1- x ) OOH Catalyst for Efficient and Ultrastable Oxygen Evolution Reaction at High Current Densities

Developing FeOOH as a robust electrocatalyst for high output oxygen evolution reaction (OER) remains challenging due to its low conductivity and dissolvability in alkaline conditions. Herein, it is demonstrated that the robust and high output Zn doped NiOOH-FeOOH (Zn-Fe_x Ni_(1-x) )OOH catalyst can be derived by electro-oxidation-induced reconstruction from the pre-electrocatalyst of Zn modified Ni metal/FeOOH film supported by nickel foam (NF). In situ Raman and ex situ characterizations elucidate that the pre-electrocatalyst undergoes dynamic reconstruction occurring on both the catalyst surface and underneath metal support during the OER process. That involves the Fe dissolution-redeposition and the merge of Zn doped FeOOH with in situ generated NiOOH from NF support and NiZn alloy nanoparticles. Benefiting from the Zn doping and the covalence interaction of FeOOH-NiOOH, the reconstructed electrode shows superior corrosion resistance, and enhanced catalytic activity as well as bonding force at the catalyst-support interface. Together with the feature of superaerophobic surface, the reconstructed electrode only requires an overpotential of 330 mV at a high-current-density of 1000 mA cm^-2 and maintains 97% of its initial activity after 1000 h. This work provides an in-depth understanding of electrocatalyst reconstruction during the OER process, which facilitates the design of high-performance OER catalysts.

Surface Activation and Ni-S Stabilization in NiO/NiS2 for Efficient Oxygen Evolution Reaction

Manipulating the active species and improving the structural stabilization of sulfur-containing catalysts during the OER process remain a tremendous challenge. Herein, we constructed NiO/NiS₂ and Fe-NiO/NiS₂ as catalyst models to study the effect of Fe doping. As expected, Fe-NiO/NiS₂ exhibits a low overpotential of 270 mV at 10 mA cm^-2 . The accumulation of hydroxyl groups on the surface of materials after Fe doping can promote the formation of highly active NiOOH at a lower OER potential. Moreover, we investigated the level of corrosion of M-S bonds and compared the stability variation of M-S bonds with Fe at different locations. Interestingly, Fe bonded with S in the bulk as the sacrificial agent can alleviate the oxidation corrosion of partial Ni-S bonds and thus endow Fe-NiO/NiS₂ long-term durability. This work could motivate the community to focus more on resolving the corrosion of sulfur-containing materials.