Molecular Engineering through Control of Structural Deformation for Highly Efficient Ultralong Organic Phosphorescence

Modulating Heavy Atom Effect in Germylene for Persistent Room Temperature Phosphorescence

It is worth but still challenging to develop the low-valent main group compounds with persistent room temperature phosphorescence (pRTP). Herein, we presented germylene-based persistent phosphors by introduction of low-valent Ge center into chromophore. A novel phosphors CzGe and its series of derivatives, namely CzGeS, CzGeSe, CzGeAu, and CzGeCu, were synthesized. Experiments and theoretical calculations reveal that the pRTP behavior were "turn on" due to the heavy atom effect of germylene. More importantly, the low-valent of oxidation state and structural traits propelled GeCz had a balance between the intersystem crossing and the shortening of lifetime caused by the heavy atoms, resulting the ultralong lifetime of 309 ms and phosphorescent quantum efficiency of 15.84 %, which is remarkable among heavy main group phosphors. This research provides valuable insights to the design of heavy atoms in phosphors and expand the applications of germylene chemistry.

Intermolecular donor-acceptor stacking to suppress triplet exciton diffusion for long-persistent organic room-temperature phosphorescence

Controlling triplet states is crucial to improve the efficiency and lifetime of organic room temperature phosphorescence (ORTP). Although the intrinsic factors from intramolecular radiative and non-radiative decay have been intensively investigated, the extrinsic factors that affect triplet exciton quenching are rarely reported. Diffusion to the defect sites inside the crystal or at the crystal surface may bring about quenching of triplet exciton. Here, the phosphorescence lifetime is found to have a negative correlation with the triplet exciton diffusion coefficient based on the density functional theory (DFT)/time-dependent density functional theory (TD-DFT) calculations on a series of ORTP materials. For systems with a weak charge transfer (CT) characteristic, close π-π stacking will lead to strong triplet coupling and fast triplet exciton diffusion in most cases, which is detrimental to the phosphorescence lifetime. Notably, for intramolcular donor-acceptor (D-A) type systems with a CT characteristic, intermolecular D-A stacking results in ultra-small triplet coupling, thus contributing to slow triplet diffusion and long phosphorescence lifetime. These findings shed some light on molecular design toward high-efficiency long persistent ORTP.

Room temperature phosphorescence from natural wood activated by external chloride anion treatment

Producing afterglow room temperature phosphorescence (RTP) from natural sources is an attractive approach to sustainable RTP materials. However, converting natural resources to RTP materials often requires toxic reagents or complex processing. Here we report that natural wood may be converted into a viable RTP material by treating with magnesium chloride. Specifically, immersing natural wood into an aqueous MgCl₂ solution at room temperature produces so-called C-wood containing chloride anions that act to promote spin orbit coupling (SOC) and increase the RTP lifetime. Produced in this manner, C-wood exhibits an intense RTP emission with a lifetime of ~ 297 ms (vs. the ca. 17.5 ms seen for natural wood). As a demonstration of potential utility, an afterglow wood sculpture is prepared in situ by simply spraying the original sculpture with a MgCl₂ solution. C-wood was also mixed with polypropylene (PP) to generate printable afterglow fibers suitable for the fabrication of luminescent plastics via 3D printing. We anticipate that the present study will facilitate the development of sustainable RTP materials.

Pressure-induced room-temperature phosphorescence enhancement based on purely organic molecules with a folded geometry

The pressure-dependent luminescence behavior of purely organic compounds is an important topic in the field of stimulus-responsive smart materials. However, the relevant studies are mainly limited to the investigation of fluorescence properties, while room-temperature phosphorescence (RTP) of purely organic compounds has not been investigated. Here, we filled in this gap regarding pressure-dependent RTP by using a model molecule selenanthrene (SeAN) with a folded geometry. For the first time to the best of our knowledge, a unique phenomenon involving pressure-induced RTP enhancement was discovered in an SeAN crystal, and an underlying mechanism involving folding-induced spin-orbit coupling enhancement was revealed. Pressure-induced RTP enhancement was also observed in an analog of SeAN also showing a folded geometry, but in this case yielded a white-light emission that is very rare in purely organic RTP-displaying materials.

Host-Guest Doping in Flexible Organic Crystals for Room-Temperature Phosphorescence

Organic single crystals (OSCs) with excellent flexibility and unique optical properties are of great importance due to their broad applicability in optical/optoelectronic devices and sensors. Nevertheless, fabricating flexible OSCs with room-temperature phosphorescence (RTP) remains a great challenge. Herein, we propose a host-guest doping strategy to achieve both RTP and flexibility of OSCs. The single-stranded crystal is highly bendable upon external force application and can immediately return to its original straight shape after removal of the stress, impressively emitting bright deep-red phosphorescence. The theoretical and experimental results demonstrate that the bright RTP arises from Förster resonance energy transfer (FRET) from the triphenylene molecules to the dopants. This strategy is both conceptually and synthetically simple and offers a universal approach for the preparation of flexible OSCs with RTP.

The Effect of Molecular Conformations and Simulated "Self-Doping" in Phenothiazine Derivatives on Room-Temperature Phosphorescence

The research of purely organic room-temperature phosphorescence (RTP) materials has drawn great attention for their wide potential applications. Besides single-component and host-guest doping systems, the self-doping with same molecule but different conformations in one state is also a possible way to construct RTP materials, regardless of its rare investigation. In this work, twenty-four phenothiazine derivatives with two distinct molecular conformations were designed and their RTP behaviors in different states were systematically studied, with the aim to deeply understand the self-doping effect on the corresponding RTP property. While the phenothiazine derivatives with quasi-axial (ax) conformation presented better RTP performance in aggregated state, the quasi-equatorial (eq) ones were better in isolated state. Accordingly, the much promoted RTP performance was achieved in the stimulated self-doping state with ax-conformer as host and eq-one as guest, demonstrating the significant influence of self-doping on RTP effect.

Long-Lived Dynamic Room Temperature Phosphorescence from Carbon Dots Based Materials

As a type of room temperature phosphorescence (RTP) material, carbon dots (CDs) always show short lifetime and low phosphorescence efficiency. To counter these disadvantages, several strategies, such as embedding in rigid matrix, introducing of heteroatom, crosslink-enhanced emission, etc., are well developed. Consequently, lots of CDs-based RTP materials are obtained. Doping of CDs into various matrix is the dominant method for preparation of long-lived CDs-based RTP materials so far. The desired CDs@matrix composites always display outstanding RTP performances. Meanwhile, matrix-free CDs and carbonized polymer dots-based RTP materials are also widely developed. Amounts of CDs possessing ultra-long lived, multiple colored, and dynamic RTP emission are successfully obtained. Herein, the recent progress achieved in CDs-based RTP materials as well as the corresponding efficient strategies and emission mechanisms are summarized and reviewed in detail. Due to CDs-based RTP materials possess excellent chemical stability, photostability and low biological toxicity, they exhibit great application potential in the fields of anti-counterfeiting, data encryption, and biological monitoring. The application of the CDs-based RTP materials is also introduced in this review. As a promising functional material, development of long wavelength RTP emitting CDs with long lifetime is still challengeable, especially for the red and near-infrared emitting RTP materials.

A Class of Organic Units Featuring Matrix-Controlled Color-Tunable Ultralong Organic Room Temperature Phosphorescence

A novel class of organic units (N-1 and N-2) and their derivatives (PNNA-1 and PNNA-2) with excellent property of ultralong organic room temperature phosphorescence (UORTP) is reported. In this work, N-1, N-2, and their derivatives function as the guests, while organic powders (PNCz, BBP, DBT) and polymethyl methacrylate (PMMA) serve as the host matrixes. Amazingly, the color of phosphorescence can be tuned in different states or by varying the host matrixes. At 77 K, all molecules show green afterglow in the monomer state but yellow afterglow in the aggregated state because strong intermolecular interactions exist in the self-aggregate and induce a redshift of the afterglow. In particular, PNNA-1 and PNNA-2 demonstrate distinctive photoactivated green UORTP in the PMMA film owing to the generation of their cation radicals. Whereas the PNNA-1@PNCz and PNNA-2@PNCz doping powders give out yellow UORTP, showing matrix-controlled color-tunable UORTP. In PNCz, the cation radicals of PNNA-1 and PNNA-2 can stay stably and form strong intermolecular interactions with PNCz, leading to a redshift of ultralong phosphorescence.

Polymerization-Enhanced Photophysical Performances of AIEgens for Chemo/Bio-Sensing and Therapy

AIE polymers have been extensively researched in the fields of OLEDs, sensing, and cancer treatment since its first report in 2003, which have achieved numerous breakthroughs during the years. In comparison with small molecules, it can simultaneously combine the unique advantages of AIE materials and the polymer itself, to further enhance their corresponding photophysical performances. In this review, we enumerate and discuss the common construction strategies of AIE-active polymers and summarize the progress of research on polymerization enhancing luminescence, photosensitization, and room-temperature phosphorescence (RTP) with their related applications in chemo/bio-sensing and therapy. To conclude, we also discuss current challenges and prospects of the field for future development.

Enabling Dual Phosphorescence by Locating a Flexible Ligand in Zn-Based Hybrid Frameworks

Room-temperature phosphorescence (RTP) materials with recognizable afterglow property have gained widespread attraction. Multicolor RTP has added benefits in multiplexed biological labeling, a zero background ratiometric sensor, a multicolor display, and other fields. However, it is a great challenge to prepare multicolor RTP from a single-component compound according to Kasha's rule. Herein, we propose a strategy to design multicolor RTP in a metal-organic hybrid framework through constructing chromophores in both isolated state and dimer state using a flexible tetradentate ligand. Two compounds were synthesized that presented blue and green dual phosphorescence with different lifetimes at ambient conditions. The photoluminescence mechanism has been thoroughly studied by structure-property analysis. This study provides various possibilities to prepare high-performing RTP materials by the rational design and synthesis of similar compounds.

Research Progress of Intramolecular π-Stacked Small Molecules for Device Applications

Organic semiconductors can be designed and constructed in π-stacked structures instead of the conventional π-conjugated structures. Through-space interaction (TSI) occurs in π-stacked optoelectronic materials. Thus, unlike electronic coupling along the conjugated chain, the functional groups can stack closely to facilitate spatial electron communication. Using π-stacked motifs, chemists and materials scientists can find new ways for constructing materials with aggregation-induced emission (AIE), thermally activated delayed fluorescence (TADF), circularly polarized luminescence (CPL), and room-temperature phosphorescence (RTP), as well as enhanced molecular conductance. Organic optoelectronic devices based on π-stacked molecules have exhibited very promising performance, with some of them exceeding π-conjugated analogues. Recently, reports on various organic π-stacked structures have grown rapidly, prompting this review. Representative molecular scaffolds and newly developed π-stacked systems could stimulate more attention on through-space charge transfer the well-known through-bond charge transfer. Finally, the opportunities and challenges for utilizing and improving particular materials are discussed. The previous achievements and upcoming prospects may provide new insights into the theory, materials, and devices in the field of organic semiconductors.

Halogen-doped phosphorescent carbon dots for grayscale patterning

Flexible organic materials that exhibit dynamic ultralong room temperature phosphorescence (DURTP) via photoactivation have attracted increasing research interest for their fascinating functions of reversibly writing-reading-erasing graphic information in the form of a long afterglow. However, due to the existence of a nonnegligible activation threshold for the initial exposure dose, the display mode of these materials has thus far been limited to binary patterns. By resorting to halogen element doping of carbon dots (CDs) to enhance intersystem crossing and reduce the activation threshold, we were able to produce, for the first time, a transparent, flexible, and fully programmable DURTP composite film with a reliable grayscale display capacity. Examples of promising applications in UV photography and highly confidential steganography were constructed, partially demonstrating the broad future applications of this material as a programmable platform with a high optical information density.

Highly Efficient Blue Phosphorescence from Pillar-Layer MOFs by Ligand Functionalization

Room temperature phosphorescence (RTP) has been extensively researched in heavy-metal containing complexes and purely organic systems. Despite the rapid blossom of RTP materials, it is still a tremendous challenge to develop highly efficient blue RTP materials with long-lived lifetimes. Taking the metal-organic framework (MOF) as a model, herein, a feasible strategy of ligand functionalization is proposed, including two essential elements, to develop blue phosphorescence materials with high efficiency and long-lived lifetimes simultaneously under ambient conditions. One is isolation of the chromophores with assistance of another predefined co-ligands, the other is restriction of the chromophores' motions through coordination and host-guest interactions. Remarkably, it renders the MOFs with highly efficient blue phosphorescence up to 80.6% and a lifetime of 169.7 ms under ambient conditions. Moreover, a demo of the crown is fabricated with MOFs ink by 3D printing technique. The potential applications for anti-counterfeiting and fingerprint visualization have been also demonstrated. This finding not only outlines a universal principle to design and synthesize highly efficient RTP materials, but also endows traditional MOFs with fresh vitality for potential applications.

White Emissions Containing Room Temperature Phosphorescence from Different Excited States of a D-π-A Molecule Depending on the Aggregate States

Development of pure organic molecular materials with room temperature phosphorescence (RTP) and their applications for white emitters have received significant attentions recently. Herein, a D-π-A molecule (DMACPPY) which can realize white emitting under ambient conditions both in the crystal state and the doped-film state by combining RTP with two fluorescent emissions is reported. The white emission from the crystalline sample of DMACPPY consists fluorescence from S₂ (the second excited singlet state) and S₁ (the first excited singlet state) along with RTP from T₁ (the first excited triplet state), namely, SST-type white light. While, the white emission from the poly methyl methacrylate (PMMA) film doped with DMACPPY contains fluorescences from S₂ and S₁ , and RTP from T₂ (the second excited triplet state) rather than T₁ (STS type). DMACPPY cannot exhibit white spectrum within alternative crystalline state since inferior RTP intensity despite similar ternary emissions. The results demonstrate that the emissive properties for excited states of DMACPPY can be tuned by changing the aggregate state from crystalline to dispersion state in PMMA film. This new RTP emitter fulfills the talent for white emitting and achieves dual-mode white emissions, invisibly, expands the application range for pure organic and heavy atom-free RTP materials.

Synthesis of a luminescent macrocycle and its crystalline structure-adaptive transformation

We report that the marriage of macrocycle chemistry and crystal engineering provides interesting macrocycle crystals with switchable luminescence and structure-adaptive transformation.

Tunable Second-Level Room-Temperature Phosphorescence of Solid Supramolecules between Acrylamide-Phenylpyridium Copolymers and Cucurbit[7]uril

A series of solid supramolecules based on acrylamide-phenylpyridium copolymers with various substituent groups (P-R: R=-CN, -CO₂ Et, -Me, -CF₃ ) and cucurbit[7]uril (CB[7]) are constructed to exhibit tunable second-level (from 0.9 s to 2.2 s) room-temperature phosphorescence (RTP) in the amorphous state. Compared with other solid supramolecules P-R/CB[7] (R=-CN, -CO₂ Et, -Me), P-CF₃ /CB[7] displays the longest lifetime (2.2 s), which is probably attributed to the fluorophilic interaction of cucurbiturils leading to a uncommon host-guest interaction between 4-phenylpyridium with -CF₃ and CB[7]. Furthermore, the RTP solid supramolecular assembly (donors) can further react with organic dyes Eosin Y or SR101 (acceptors) to form ternary supramolecular systems featuring ultralong phosphorescence energy transfer (PpET) and visible delayed fluorescence (yellow for EY at 568 nm and red for SR101 at 620 nm). Significantly, the ultralong multicolor PpET supramolecular assembly can be further applied in fields of anti-counterfeiting and information encryption and painting.

Gaining New Insights into Trace Guest Doping Role in Manipulating Organic Crystal Phosphorescence

Trace guest doping systems often show better room temperature phosphorescence (RTP), but trace guest doping role and mechanism are not recognized well. Here we cocrystallize commercial (CCZ) and self-made (LCZ) carbazole derivatives and verify that 0.2‰ isomer doping can afford the deserved crystal RTP, but further increasing the isomer amount hardly improves RTP. Isomer doping does not affect crystal stacking modes and intermolecular interactions and is inefficient in monomolecular and amorphous states. LCZ derivatives are intrinsically phosphorescent, but crystallization itself cannot effectively inhibit thermal deactivation, and isomer doping restricts nonradiative relaxation and reduces the energy level of the triplet emissive state via space action at a distance rather than currently described adjacent intermolecular interactions. This work has updated some existing views and represented an important conceptual advance in a fresh understanding of trace guest doping RTP systems.

Core-Shell Fluorescent Polymeric Particles with Tunable White Light Emission Based on Aggregation Microenvironment Manipulation

White-light emitting polymers (WLEPs) based on aggregation microenvironment-sensitive aggregation-induced emission (AIE) and Förster resonance energy transfer (FRET) have aroused great interest in lighting and optoelectronic devices. Herein, we developed a novel strategy to construct WLEP particles via a stepwise self-stabilized precipitation polymerization of two emission-complementary AIEgens under core-shell engineering, where the AIE characteristics and FRET process of core-shell fluorescent polymeric particles (CS-FPPs) could be modulated by altering aggregation microenvironment under swelling and shrinking of polymers, facilitating the tunable white light emission of CS-FPPs. Furthermore, such tuning could be fast realized in the solid state, thus demonstrating the potential in anti-counterfeiting. This work proved the significance of aggregation microenvironment on emission of luminogens, guiding the development of high-efficiency emission-tunable materials.

Purely Organic Room-Temperature Phosphorescence Endowing Fast Intersystem Crossing from Through-Space Spin-Orbit Coupling

Purely organic room-temperature phosphorescence endowing very fast intersystem crossing from through-space systems has not been well investigated. Here we report three space-confined bridged phosphors, where phenothiazine is linked with dibenzothiophene, dibenzofuran, and carbazole by a 9,9-dimethylxanthene bridge. Nearly pure phosphorescence is observed in the crystals at room temperature. Interestingly, phosphorescence comes solely from the phenothiazine segment. Experimental results indicate that bridged counterparts of dibenzothiophene, dibenzofuran, and carbazole contribute as close-lying triplet states with locally excited (LE) character. The through-space spin-orbit coupling principle is proposed in these bridged systems, as their ¹LE and ³LE states have intrinsic spatial overlap, degenerate energy levels, and tilting face-to-face alignment. The resulting effective through-space spin-orbit coupling leads to efficient intersystem crossing a with rate constant as high as 10⁹ s^-1 and an overwhelming triplet decay channel of the singlet excited state.

Organic Persistent Luminescent Materials: Ultralong Room-Temperature Phosphorescence and Multicolor-Tunable Afterglow

Organic persistent luminescent materials have attracted special attention due to their significant applications in optoelectronics, sensors, and security technology areas. In this work, a series of organic compounds (1-4) with twisted electron donor-acceptor structures are successfully designed and synthesized, and then the resultant compounds are dissolved in methyl methacrylate (MMA), and afterward, in situ polymerization realizes single-molecular organic room-temperature phosphorescent (RTP) materials (P1-P4). All RTP materials show long lifetime, especially P2 exhibits ultralong lifetime of 1.51 s. When the compounds are grown into single crystals, multicolor-tunable afterglow is obtained at different delay times due to the dual emission of phosphorescence and delayed fluorescence, which is promising to be applied in high-level anticounterfeiting.

Activating Room-Temperature Phosphorescence of Organic Luminophores via External Heavy-Atom Effect and Rigidity of Ionic Polymer Matrix*

Pure organic room-temperature phosphorescence (RTP) materials have attracted wide attention for their easy preparation, low toxicity, and applications in various fields like bioimaging and anti-counterfeiting. Developing phosphorescent systems with more universality and less difficulty in synthesis has long been the pursuit of materials scientists. By employing a polymeric quaternary ammonium salt with an ionic bonding matrix and heavy atoms, commercial fluorescent dyes are directly endowed with phosphorescence emission. In a single amorphous polymer, the external heavy-atom effect generates excited triplet states and the rigid polymer matrix stabilizes them. This study put forward a new general strategy to design and develop pure organic RTP materials starting from existing library of organic dyes without complicated chemical synthesis.