Molecular Cages Self‐Assembled by Imine Condensation in Water

Expedient Decagram-Scale Synthesis of Robust Organic Cages That Bind Sulfate Strongly and Selectively in Water

Selective anion recognition remains a key challenge in supramolecular chemistry: only a very small number of systems that can function in water are known, and these nearly always preferentially bind hydrophobic anions. In this work, we report three robust hexa-cationic cages that can be prepared on scales up to 14 g in two simple and high-yielding steps from commercially available materials. One of these cages displays unusually strong sulfate binding in water (Ka = 12,000 M-1), and demonstrates high selectivity for this anion over H2PO4-/HPO42- in DMSO/buffer mixtures. These results demonstrate that relatively large, three-dimensional supramolecular hosts can be prepared in high yields and on large scales, and can be highly potent receptors.

Ultrafast Charge Transfer in a Core-shell CdS@Cu-TCPP-Pt Heterojunction for Photocatalytic Hydrogen Production Coupled with Selective Benzylamine Oxidation

Photocatalytic selective oxidation of organic substances coupled with hydrogen production is believed to be one of the most favorable pathways to make full use of photogenerated charge carriers. However, this catalytic reaction is often discouraged due to the rapid recombination of photogenerated carriers in practical applications. In this work, a core-shell CdS@Cu-TCPP-Pt nanorod heterojunction was dexterously designed for boosting the photocatalytic dehydrogenation performance of benzylamine. The transient absorption results revealed that the photogenerated electron-holes could be effectively separated by properly matching the energy levels in CdS@Cu-TCPP. Surprisingly, Pt embedded in Cu-TCPP not only provided abundant hydrogen production active sites but also facilitated ultrafast charge transfer, which endowed CdS@Cu-TCPP-Pt with remarkable photocatalytic performances for the coproductions of N-benzylidenebenzylamine (1 mL) with a conversion of 23.48% and H2 (20.75 mmol g-1 h-1) under visible irradiation, far surpassing those of CdS and Cu-TCPP. Obviously, the present work verifies that designing and fabricating a hybrid photocatalyst with high separation efficiency of electron-hole pairs is also a significant avenue for other high-performance cooperative dual-functional photocatalytic reactions.

Engineering a Surfactant Trap via Postassembly Modification of an Imine Cage

Imine self-assembly stands as a potent strategy for the preparation of molecular organic cages. However, challenges persist, such as water insolubility and limited recognition properties due to constraints in the application of specific components during the self-assembly process. In this study, we addressed these limitations by initially employing a locking strategy, followed by a postassembly modification. This sequential approach enables precise control over both the solubility and host-guest properties of an imine-based cage. The resulting structure demonstrates water solubility and exhibits an exceptional capacity to selectively interact with anionic surfactants, inducing their precipitation. Remarkably, each cage precipitates 24 equiv of anionic surfactants even at concentrations much lower than the surfactant's critical micelle concentration (CMC), ensuring their complete removal. Molecular simulations elucidate how anionic surfactants specifically interact with the cage to facilitate aggregation below the surfactant CMC and induce precipitation as a micellar cross-linker. This innovative class of cages paves the way for the advancement of materials tailored for environmental remediation.

Development of Fluorenyl-Based Copolyimines with Adjustable Mechanical Properties, Recyclability and Friction Resistance

Dynamic polyimines are a class of fascinating dynamic polymers with recyclability and reparability owing to their reversible Schiff-base reactions. However, balancing the dynamic properties and mechanical strength of dynamic polyimines presents a major challenge due to the dissociative and associative nature of the imine bonds. Herein, we introduced bulky fluorene groups and polyether amine into the skeleton of polyimine networks to achieve a tradeoff in comprehensive properties. The resulting dynamic polyimines with fluorene groups (Cardo-DPIs) were successfully synthesized by combining the rigid diamine 9,9-bis(4-aminophenyl)fluorene and the flexible polyether amine, demonstrating a high tensile strength of 64.7 MPa. Additionally, Cardo-DPIs films with more content of rigid fluorene groups exhibited higher water resistance, glass transition temperature and wear-resisting ability. Moreover, the Cardo-DPIs films not only efficiently underwent thermal reshaping, but also exhibited excellent self-healing capabilities and chemical degradation in acidic solutions. Furthermore, the resulting films can achieve fully closed-loop recovery by free amine solution for 2 h at room temperature. This study broadens the scope of dynamic polyimine materials and promotes the balanced development of their functional and mechanical properties.

Key structural features to favour imines over hydrates in water: pyridoxal phosphate as a muse

Imination reactions in water represent a challenge not only because of the high propensity of imines to be hydrolysed but also as a result of the competing hydrate formation through H2O addition to the aldehyde. In the present work we report a successful approach that allows for favouring imitation reactions while silencing hydrate formation. Such remarkable reactivity and selectivity can be attained by fine-tuning the electronic and steric structural features of the ortho-substituents of the carbonyl groups. It resulted from studying the structure-reactivity relationships in a series of condensation reactions between different amines and aldehydes, comparing the results to the ones obtained in the presence of the biologically-relevant pyridoxal phosphate (PLP). The key role of negatively-charged and sterically-crowding units (i.e., sulfonate groups) in disfavouring hydrate formation was corroborated by DFT and steric-hindrance calculations. Furthermore, the best-performing aldehyde leads to higher imine yields, selectivity and stability than those of PLP itself, allowing for the inhibition of a PLP-dependent enzyme (transaminase) through dynamic aldimine exchange. These results will increase the applicability of imine-based dynamic covalent chemistry (DCvC) under physiological conditions and will pave the way for the design of new carbonyl derivatives that might be used in the dynamic modification of biomolecules.

Stabilizing atomic Ru species in conjugated sp2 carbon-linked covalent organic framework for acidic water oxidation

Suppressing the kinetically favorable lattice oxygen oxidation mechanism pathway and triggering the adsorbate evolution mechanism pathway at the expense of activity are the state-of-the-art strategies for Ru-based electrocatalysts toward acidic water oxidation. Herein, atomically dispersed Ru species are anchored into an acidic stable vinyl-linked 2D covalent organic framework with unique crossed π-conjugation, termed as COF-205-Ru. The crossed π-conjugated structure of COF-205-Ru not only suppresses the dissolution of Ru through strong Ru-N motifs, but also reduces the oxidation state of Ru by multiple π-conjugations, thereby activating the oxygen coordinated to Ru and stabilizing the oxygen vacancies during oxygen evolution process. Experimental results including X-ray absorption spectroscopy, in situ Raman spectroscopy, in situ powder X-ray diffraction patterns, and theoretical calculations unveil the activated oxygen with elevated energy level of O 2p band, decreased oxygen vacancy formation energy, promoted electrochemical stability, and significantly reduced energy barrier of potential determining step for acidic water oxidation. Consequently, the obtained COF-205-Ru displays a high mass activity with 2659.3 A g-1, which is 32-fold higher than the commercial RuO2, and retains long-term durability of over 280 h. This work provides a strategy to simultaneously promote the stability and activity of Ru-based catalysts for acidic water oxidation.

Guest-induced narcissistic self-sorting in water via imine formation

Two anionic tetrahedral cages were self-assembled as the only observable products in weakly basic water via imine condensation. The success of the high-yielding formation of the cages in water relies on (i) multivalency enhancing the stability of the imine bond and affording these cages water compatibility and (ii) a guest template with a complementary size and geometry that provides a hydrophobic driving force by occupying the corresponding cage cavity. When all four precursors, namely two trisaldehydes and two trisamines, were combined in water, narcissistic self-sorting occurred when both guest templates were present. In organic media where the hydrophobic effect is absent, narcissistic self-sorting did not occur in the analogous cage systems, confirming the importance of guest templates.

Viologen-based solution-processable ionic porous polymers for electrochromic applications

Electrochromic porous thin films are promising for applications in smart windows and energy-efficient optical displays. However, their generally poor processing ability and excessive processing times remain grand challenges. Herein, we report the design and convenient synthesis of core-altered N-arylated viologens with aldehyde groups (πV-CHO) as new building blocks to prepare soluble, viologen-embedded ionic porous polymers. We also demonstrate that these polymers can be easily solution-processed by drop-coating to fabricate high-quality electrochromic films with tunable optoelectronic properties in a cost-effective fashion. The prepared films exhibit excellent electrochromic performance, including a low driving voltage (1.2-1.4 V), fast switching times (0.8-1.7 s), great coloration efficiency (73-268 cm2 C-1), remarkably high optical contrast up to 95.6%, long cycling stability, and tunable oxidation and reduction colors. This work sheds important light on a new molecular engineering approach to produce redox-active polymers with combined properties of intrinsic porosity, reversible and tunable redox activity, and solution processability. This provides the materials with an inherently broad utility in a variety of electrochemical devices for energy storage, sensors, and electronic applications.

Stepwise Synthesis of Low-Symmetry Hexacationic Pyridinium Organic Cages

An efficient approach was developed for the synthesis of the well-known BlueCage by pre-bridging two 2,4,6-tris(4-pyridyl)-1,3,5-triazine (TPT) panels with one linker followed by cage formation in a much improved yield and shortened reaction time. Such a stepwise methodology was further applied to synthesize three new pyridinium organic cages, C2, C3, and C4, where the low-symmetry cages C3 and C4 with angled panels demonstrated better recognition properties toward 1,1'-bi-2-naphthol (BINOL) than the high-symmetry analogue C2 featuring parallel platforms.

Enantioselective Self-Assembly of a Homochiral Tetrahedral Cage Comprising Only Achiral Precursors

How Nature synthesizes enantiomerically pure substances from achiral or racemic resources remains a mystery. In this study, we aimed to emulate this natural phenomenon by constructing chiral tetrahedral cages through self-assembly, achieved by condensing two achiral compounds-a trisamine and a trisaldehyde. The occurrence of intercomponent CH⋅⋅⋅π interactions among the phenyl building blocks within the cage frameworks results in twisted conformations, imparting planar chirality to the tetrahedrons. In instances where the trisaldehyde precursor features electron-withdrawing ester side chains, we observed that the intermolecular CH⋅⋅⋅π forces are strong enough to prevent racemization. To attain enantioselective self-assembly, a chiral amine was introduced during the imine formation process. The addition of three equivalents of chiral amino mediator to one equivalent of the achiral trisaldehyde precursor formed a trisimino intermediate. This chiral compound was subsequently combined with the achiral trisamino precursor, leading to an imine exchange reaction that releasing the chiral amino mediator and formation of the tetrahedral cage with an enantiomeric excess (ee) of up to 75 %, exclusively composed of achiral building blocks. This experimental observation aligns with theoretical calculations based on the free energies of related cage structures. Moreover, since the chiral amine was not consumed during the imine exchange cycle, it enabled the enantioselective self-assembly of the tetrahedral cage for multiple cycles when new batches of the achiral trisaldehyde and trisamino precursors were successively added.

Adaptisorption of Nonporous Polymer Crystals

Although our knowledge and understanding of adsorptions in natural and artificial systems has increased dramatically during the past century, adsorption associated with nonporous polymers remains something of a mystery, hampering applications. Here we demonstrate a model system for adaptisorption of nonporous polymers, wherein dative B-N bonds and host-guest binding units act as the kinetic and thermodynamic components, respectively. The coupling of these two components enables nonporous polymer crystals to adsorb molecules from solution and undergo recrystallization as thermodynamically favored crystals. Adaptisorption of nonporous polymer crystals not only extends the types of adsorption in which the sorbate molecules are integrated in a precise and orderly manner in the sorbent systems, but also provides a facile and accurate approach to the construction of polymeric materials with precise architectures and integrated functions.

Water-Soluble Triazolium Covalent Cages for ATP Sensing

Water-soluble organic cages are attractive targets for their molecular recognition and sensing features of biologically relevant molecules. Here, we have successfully designed and synthesized a pair of water-soluble cationic cages employing click reaction as the fundamental step followed by the N-methylation of the triazole rings. The rigid and shape-persistent 3D hydrophobic cavity, positively charged surface, H-bonding triazolium rings, and excellent water solubility empower both cages to exhibit a superior affinity and selectivity for binding with adenosine-5'-triphosphate (ATP) compared to cyclophanes and other macrocyclic receptors. Both cage molecules (PCC⋅Cl and BCC⋅Cl) can bind a highly emissive dye HPTS (8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt) to form non-fluorescent complexes. The addition of ATP resulted in the stronger cage⊂ATP complexes with the retention of HPTS emission upon its displacement. The resultant indicator-displacement assay system can efficiently sense and quantify ATP in nanomolar detection limits in buffer solutions and human serum matrix. Spectroscopic and theoretical studies revealed the synergistic effect of π⋅⋅⋅π stacking interaction between the aromatic moiety of the cationic cages and the adenine moiety of ATP, as well as the electrostatic and hydrogen bonding interaction between the phosphate anion of ATP and triazole protons of cages, played the pivotal roles in the sensing process.

Self-Assembly via Condensation of Imine or Its N-Substituted Derivatives

ConspectusCompared to traditionally used irreversible chemical reactions, dynamic covalent chemistry (DCC) including imine formation represents a more advanced technique in the preparation of molecules with complex structures and topologies, whose syntheses require the formation of many bonds. By allowing the occurrence of error checking and self-correcting, it is likely that the target molecules with high enough thermodynamic stability could be self-assembled in high or even quantitative yield. Two questions are raised herein. First, it becomes a central problem in self-assembly that how to endow a target product with high enough thermodynamic stability so that it can be produced as the major or the only product within the self-assembly library. Second, the reversible nature of dynamic bonds jeopardizes the intrinsic stability of the products. More specifically, the imine bond which represents the mostly used dynamic covalent bond, is apt to undergo hydrolysis in the presence of water. Developing new approaches to make imine more robust and compatible with water is thus of importance. In this account, we summarized the progress made in our group in the field of self-assembly based on C═N bond formation. In organic solvent where an imine bond is relatively robust, we focus on studying how to enhance the thermodynamic stability of a target molecule by introducing intramolecular forces. These noncovalent interactions either release enthalpy to favor the formation of the target molecule or preorganize the building blocks into specific conformations that mimic the product, so that the entropy loss of the formation of the latter is thus suppressed. In water, which often leads to imine hydrolysis, we developed two strategies to enhance the water-compatibility. By taking advantage of multivalency, namely, multiple bonds are often more robust than a single bond, self-assembly via condensation of imine was performed successfully in water, a solvent that is considered as forbidden zone of imine. Another approach is to replace typical imine with its more robust and water compatible derivatives, namely, either hydrazone or oxime, whose C═N bonds are generally less electrophilic compared to typical imine. With the water-compatible dynamic bonds in hand, a variety topological nontrivial molecules such as catenanes and knots was self-assembled successfully in aqueous media, driven by hydrophobic effect. When the self-assembled molecules in the form of rings and cages were designed for supramolecular purposes, water-compatibility endows a merit that allows the hosts to take advantage of hydrophobic effect to drive host-guest recognition, enabling various tasks to be accomplished, such as separation of guest isomers with similar physical properties, recognition of highly hydrated anions, as well as stabilization of guest dimers.

Pyrene-Based Cationic Fluorophores with High Affinity for BF4-, PF6-, and ClO4- Anions: Detection and Removal

Anions play an indispensable role in the balance and regulation of the ecological environment and human health; however, excess anions can cause serious ecological and environment problems. Therefore, the detection and removal of excess anions in aqueous solution is not only a technological problem but also crucial for environmental protection. Herein, a set of water-soluble pyrene-based cationic fluorophores were synthesized, which exhibit high sensitivity for the detection of the anions BF4-, PF6-, and ClO4- via electrostatic interactions. Such fluorescent probes exhibit "turn-on" emission characteristics even at low concentrations of anions due to anion-π+ interactions. Moreover, these fluorescence probes act as efficient precipitating agents for the removal of the BF4-, PF6-, and ClO4- anions from an aqueous environment. This work opens up new avenues for future research on pyrene-based fluorophores as turn-on fluorescence probes for anion detection and as excellent precipitating agents in environmental settings.

Supramolecular multivalency effects enhance imine formation in aqueous medium allowing for dynamic modification of enzymatic activity

Imine formation under physiological conditions represents a challenging reaction due to the strong propensity of aldimines to be hydrolyzed. Herein we disclose the remarkable effect of supramolecular multivalency on increasing imine stability. A family of reactive aldehydes was synthesized bearing supramolecularly-active sites within their structure. The imine formation activity for such aldehydes was evaluated and compared with model aldehydes. The reaction of the best-performing species - containing two carboxylate groups-with a set of amines showed a significant decrease in imine yields as the degree of supramolecular multivalency between sidechains decreased. The reversible conjugation of amino acid derivatives and small peptides was also assayed, with excellent selectivities for the imine formation at the Nα position even in substrates containing competing sites. Preliminary results on protein bioconjugation revealed that a model enzyme could be dynamically inhibited upon reaction with the aldehyde, with its native activity being recovered by displacing the imine bonds with a suitable chemical effector (i.e., acylhydrazide).

One-pot synthesis of dynamically cross-linked polymers for serum-resistant nucleic acid delivery

Cationic polymers used for nucleic acid delivery often suffer from complicated syntheses, undesired intracellular cargo release and low serum stability. Herein, a series of ternary polymers were synthesized via facile green chemistry to achieve efficient plasmid DNA and mRNA delivery in serum. During the one-pot synthesis of the ternary polymer, acetylphenylboric acid (APBA), polyphenol and low-molecular weight polyethyleneimine (PEI 1.8k) were dynamically cross-linked with each other due to formation of an imine between PEI 1.8k and APBA and formation of a boronate ester between APBA and polyphenol. Series of polyphenols, including ellagic acid (EA), epigallocatechin gallate (EGCG), nordihydroguaiaretic acid (NDGA), rutin (RT) and rosmarinic acid (RA), and APBA molecules, including 2-acetylphenylboric acid (2-APBA), 3-acetylphenylboric acid (3-APBA) and 4-acetylphenylboric acid (4-APBA), were screened and the best-performing ternary polymer, 2-PEI-RT, constructed from RT and 2-APBA, was identified. The ternary polymer featured efficient DNA condensation to favor cellular internalization, and the acidic environment in endolysosomes triggered effective degradation of the polymer to promote cargo release. Thus, 2-PEI-RT showed robust plasmid DNA transfection efficiencies in various tumor cells in serum, outperforming the commercial reagent PEI 25k by 1-3 orders of magnitude. Moreover, 2-PEI-RT mediated efficient cytosolic delivery of Cas9-mRNA/sgRNA to enable pronounced CRISPR-Cas9 genome editing in vitro. Such a facile and robust platform holds great potential for non-viral nucleic acid delivery and gene therapy.

Porous Organic Cages

Porous organic cages (POCs) are a relatively new class of low-density crystalline materials that have emerged as a versatile platform for investigating molecular recognition, gas storage and separation, and proton conduction, with potential applications in the fields of porous liquids, highly permeable membranes, heterogeneous catalysis, and microreactors. In common with highly extended porous structures, such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and porous organic polymers (POPs), POCs possess all of the advantages of highly specific surface areas, porosities, open pore channels, and tunable structures. In addition, they have discrete molecular structures and exhibit good to excellent solubilities in common solvents, enabling their solution dispersibility and processability─properties that are not readily available in the case of the well-established, insoluble, extended porous frameworks. Here, we present a critical review summarizing in detail recent progress and breakthroughs─especially during the past five years─of all the POCs while taking a close look at their strategic design, precise synthesis, including both irreversible bond-forming chemistry and dynamic covalent chemistry, advanced characterization, and diverse applications. We highlight representative POC examples in an attempt to gain some understanding of their structure-function relationships. We also discuss future challenges and opportunities in the design, synthesis, characterization, and application of POCs. We anticipate that this review will be useful to researchers working in this field when it comes to designing and developing new POCs with desired functions.

The Green Box: Selenoviologen-Based Tetracationic Cyclophane for Electrochromism, Host-Guest Interactions, and Visible-Light Photocatalysis

The novel selenoviologen-based tetracationic cyclophanes (green boxes 3 and 5) with rigid electron-deficient cavities are synthesized via S_N2 reactions in two steps. The green boxes exhibit good redox properties, narrow energy gaps, and strong absorption in the visible range (370-470 nm), especially for the green box 5 containing two selenoviologen (SeV²⁺) units. Meanwhile, the femtosecond transient absorption (fs-TA) reveals that the green boxes have a stabilized dicationic biradical, high efficiency of intramolecular charge transfer (ICT), and long-lived charge separation state due to the formation of cyclophane structure. Based on the excellent photophysical and redox properties, the green boxes are applied to electrochromic devices (ECDs) and visible-light-driven hydrogen production with a high H₂ generation rate (34 μmol/h), turnover number (203), and apparent quantum yield (5.33 × 10^-2). In addition, the host-guest recognitions are demonstrated between the green boxes and electron-rich guests (e.g., G1:1-naphthol and G2:platinum(II)-tethered naphthalene) in MeCN through C-H···π and π···π interactions. As a one-component system, the host-guest complexes of green box⊃G2 are successfully applied to visible-light photocatalytic hydrogen production due to the intramolecular electron transfer (IET) between platinum(II) of G2 and SeV²⁺ of the green box, which provides a simplified system for solar energy conversion.

Self-Assembled Cage for In Situ Detecting Silver Cation in Water

Here, a capsule-shaped cage comprising three monocationic arms was efficiently self-assembled by condensing a triscationic trisaldehyde and a trisamino linkage in water. Multivalence endows the cage with thermodynamic stability in water. Despite its triscationic nature, the cage is able to use its trisimino residue to coordinate a silver cation. As a comparison, other cations lead to cage decomposition or no coordination. The cage and Ag⁺-coordinated complex were both characterized and confirmed by NMR spectroscopy, mass spectrometry, and theoretical calculations. The metal-ligand complex exhibits a pale-yellow color that can be detectable by the naked eye. The Ag⁺-coordinated complex undergoes decoordination upon the addition of NaCl, during which the cage containing imine bonds remains intact. Such stability implies that the cage might be potentially employed in silver detection and mining.

Real-time chirality transfer monitoring from statistically random to discrete homochiral nanotubes

Real time monitoring of chirality transfer processes is necessary to better understand their kinetic properties. Herein, we monitor an ideal chirality transfer process from a statistically random distribution to a diastereomerically pure assembly in real time. The chirality transfer is based on discrete trimeric tubular assemblies of planar chiral pillar[5]arenes, achieving the construction of diastereomerically pure trimers of pillar[5]arenes through synergistic effect of ion pairing between a racemic rim-differentiated pillar[5]arene pentaacid bearing five benzoic acids on one rim and five alkyl chains on the other, and an optically resolved pillar[5]arene decaamine bearing ten amines. When the decaamine is mixed with the pentaacid, the decaamine is sandwiched by two pentaacids through ten ion pairs, initially producing a statistically random mixture of a homochiral trimer and two heterochiral trimers. The heterochiral trimers gradually dissociate and reassemble into the homochiral trimers after unit flipping of the pentaacid, leading to chirality transfer from the decaamine and producing diastereomerically pure trimers.

A triple-diazonium reagent for virus crosslinking and the synthesis of an azo-linked molecular cage

The first bench-stable triple-diazonium reagent (TDA-1) was rationally designed and synthesized for coupling and crosslinking. The three reactive sites of TDA-1 can react with phenol-containing molecules as well as plant viruses in aqueous buffers efficiently. In addition, a new-type azo-linked cage was constructed by the direct reaction of TDA-1 with a triple-phenol molecule and was characterized by X-ray crystallography.

Purely Covalent Molecular Cages and Containers for Guest Encapsulation

Cage compounds offer unique binding pockets similar to enzyme-binding sites, which can be customized in terms of size, shape, and functional groups to point toward the cavity and many other parameters. Different synthetic strategies have been developed to create a toolkit of methods that allow preparing tailor-made organic cages for a number of distinct applications, such as gas separation, molecular recognition, molecular encapsulation, hosts for catalysis, etc. These examples show the versatility and high selectivity that can be achieved using cages, which is impossible by employing other molecular systems. This review explores the progress made in the field of fully organic molecular cages and containers by focusing on the properties of the cavity and their application to encapsulate guests.

A Dioscorea opposita Thunb Polysaccharide-Based Dual-Responsive Hydrogel for Insulin Controlled Release

A novel hydrogel (DOP/PEI-PBA) based on the “three-component” reaction of 2-formylphenylboric acid (2-FPBA), the primary amine group of polyethyleneimine (PEI) and the cis-o-dihydroxy groups of Dioscorea opposita Thunb polysaccharide (DOP) was designed in this work. The hydrogel can be easily prepared by simply mixing the three reactants at room temperature. The hydrogel had dual responsiveness to glucose and pH, and can realize the controllable release of insulin. Moreover, the hydrogel combining insulin and DOP can inhibit the reactive oxygen species (ROS) level and malondialdehyde (MDA) content, and promote glucose consumption as well as the level of superoxide dismutase (SOD), in high-glucose-induced injury in HL-7702 cells, which reflects the synergistic effect of insulin and DOP to protect hepatocytes from oxidative stress at the same time. Further in vitro cytotoxicity studies showed that the hydrogel had good biocompatibility and no obvious toxicity to cells. These indicate that the prepared hydrogel (DOP/PEI-PBA) can be expected to be applied in the clinical treatment of insulin deficiency in diabetes.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

A trefoil knot self-templated through imination in water

The preparation of topologically nontrivial molecules is often assisted by covalent, supramolecular or coordinative templates that provide spatial pre-organization for all components. Herein, we report a trefoil knot that can be self-assembled efficiently in water without involving additional templates. The direct condensation of three equivalents of a tetraformyl precursor and six equivalents of a chiral diamine produces successfully a [3 + 6] trefoil knot whose intrinsic handedness is dictated by the stereochemical configuration of the diamine linkers. Contrary to the conventional wisdom that imine condensation is not amenable to use in water, the multivalent cooperativity between all the imine bonds within the framework makes this trefoil knot robust in the aqueous environment. Furthermore, the presence of water is proven to be essential for the trefoil knot formation. A topologically trivial macrocycle composed of two tetraformyl and four diamino building blocks is obtained when a similar reaction is performed in organic media, indicating that hydrophobic effect is a major driving force behind the scene.

Enantioselective assembly and recognition of heterochiral porous organic cages deduced from binary chiral components

Chiral recognition and discrimination is not only of significance in biological processes but also a powerful method to fabricate functional supramolecular materials. Herein, a pair of heterochiral porous organic cages (HPOC-1), out of four possible enantiomeric products, with mirror stereoisomeric crystal structures were cleanly prepared by condensation occurring in the exclusive combination of cyclohexanediamine and binaphthol-based tetraaldehyde enantiomers. Nuclear magnetic resonance and luminescence spectroscopy have been employed to monitor the assembly process of HPOC-1, revealing the clean formation of heterochiral organic cages due to the enantioselective recognition of (S,S)-binaphthol towards (R,R)-cyclohexanediamine derivatives and vice versa. Interestingly, HPOC-1 exhibits circularly polarized luminescence and enantioselective recognition of chiral substrates according to the circular dichroism spectral change. Theoretical simulations have been carried out, rationalizing both the enantioselective assembly and recognition of HPOC-1.

Conformation-Selective Self-Assembly of Pd6 Trifacial Molecular Barrels Using a Tetrapyridyl Ligand

A conformationally flexible tetrapyridyl ligand L was assembled separately with three cis-blocked 90° Pd^II acceptors (M1, M2, and M3) containing different blocking diamines. Surprisingly, different conformations of the donor L were arrested by the acceptors depending on the nature of the blocking amine, leading to the formation of isomeric Pd₆ barrels (B1, B2, and B3). B2 and B3 with larger windows have been used to encapsulate polyaromatic hydrocarbons.

Oligopyrrolic Cages: From Classic Molecular Constructs to Chemically Responsive Polytopic Receptors

Conspectus"Functional molecular systems", discrete and self-assembled constructs where control over molecular recognition, structure, bonding, transport, release, catalytic activity, etc., is readily achieved, are a topic of current interest. Within this broad paradigm, oligopyrrolic cages have garnered attention due to their responsive recognition features. Due to the presence of slightly polar pyrrole subunits which can also behave as hydrogen-bonding donors, these oligopyrrolic cages are potential receptors for various polarized species. In this Account, we summarize recent advances involving the syntheses and study of (1) covalent oligopyrrolic macrobicyclic cages, (2) oligopyrrolic metallacages, and (3) oligopyrrolic noncovalently linked cages. Considered in concert, these molecular constructs have allowed advances in applied supramolecular chemistry; to date, they have been exploited for selective guest encapsulation studies, anion binding and ion-channel formation, and gas absorption, among other applications. While key findings from others will be noted, in this Account will focus on our own contributions to the chemistry of discrete oligopyrrolic macrocycles and their use in supramolecular host-guest chemistry and sensing applications. In terms of specifics, we will detail how oligopyrrole cages with well-defined molecular geometries permit reversible guest binding under ambient conditions and how the incorporation of pyrrole subunits within larger superstructures allows effective control over anion/conjugate acid binding activity under ambient conditions. We will also provide examples that show how derivatization of these rudimentary macrocyclic cores with various sterically congested β-substituted oligopyrroles can provide entry into more complex supramolecular architectures. In addition, we will detail how hybrid systems that include heterocycles other than pyrrole, such as pyridine and naphthyridine, can be used to create self-assembled materials that show promise as gas-absorbing materials and colorimetric reversible sensors. Studies involving oligopyrrolic polymetallic cages and oligopyrrolic supramolecular cages will also be reviewed. First, we will discuss all-carbon-linked oligopyrrolic bicycles and continue on to present systems linked via amines and imines linkages. Finally, we will summarize recent work on pyrrolic cages created through the use of metal centers or various noncovalent interactions. We hope that this Account will provide researchers with an initial foundation for understanding oligopyrrolic cage chemistry, thereby allowing for further advances in the area. It is expected that the fundamental design and recognition principles made in the area of oligopyrrole cages, as exemplified by our contributions, will be of general use to researchers targeting the design of functional molecular systems. As such, we have structured this Account so as to summarize the past while setting the stage for the future.

An Adaptable Water-Soluble Molecular Boat for Selective Separation of Phenanthrene from Isomeric Anthracene

Anthracene crude oil is a common source of phenanthrene for its industrial use. The isolation of phenanthrene from this source is a challenging task due to very similar physical properties to its isomer anthracene. We report here a water-soluble Pd(II) molecular boat (MB1) with unusual structural topology that was obtained by assembling a flexible tetrapyridyl donor (L) with a cis-Pd(II) acceptor. The flexible backbone of the boat enabled it to breathe in the presence of a guest optimizing the fit within the cavity. The boat binds phenanthrene more strongly than anthracene, which enabled separation of phenanthrene with an >98% purity from an equimolar mixture of the two isomers using MB1 as an extracting agent. MB1 represents a unique example of a coordination receptor suitable for selective aqueous extraction of phenanthrene from anthracene with reusability of several cycles.

Asymmetric hydroamination with far fewer chiral species than copper centers achieved by tuning the structure of supramolecular helical catalysts

Mixing a BTA ligand (in black), a “sergeant” (in blue) and an achiral BTA additive (in orange) affords the amination product in 75% e.e. even though only one “sergeant” for ca. 10 copper centers are present in the supramolecular helical catalyst.

Photooxidase Mimicking with Adaptive Coordination Molecular Capsules

One important feature of enzyme catalysis is the induced-fit conformational change after binding substrates. Herein, we report a biomimetic water-soluble molecular capsule featuring adaptive structural change toward substrate binding, which offers an ideal platform for efficient photocatalysis. The molecular capsule was coordination-assembled from three anthracene-bridged bis-TPT [TPT = 2,4,6-tris(4-pyridyl)-1,3,5-triazine] ligands and six (bpy)Pd(NO3)2 (bpy = 2,2'-bipyridine). Once substrates bind to its hydrophobic cavity, this capsule would undergo quantitative capsule-to-bowl transformation. Visible-light absorption brought about by both the anthracene units and the charge-transfer absorption on the late-formed quintuple π-π stacked host-guest complex efficiently facilitates aerobic photooxidation for the sulfide guests by visible-light irradiation under mild conditions. Desired turnover numbers and product selectivity (sulfoxide over sulfone) have been achieved by the transformable nature of the catalyst and the hydrophilicity of the sulfoxide product. Such a photocatalytic process enabled by an adaptive coordination capsule and substrates as the allosteric effector paves the way for constructing artificial systems to mimic enzyme catalysis.

Stabilization of Dynamic Covalent Architectures by Multivalence

The formation of imine bond is reversible. This feature has been taken advantage of by chemists for accomplishing high yielding self-assembly. On the other hand, it also jeopardizes the intrinsic stability of these self-assembled products. However, some recent discoveries demonstrate that some of these imine bond containing molecules could be rather stable or kinetically inert. A deep investigation indicated that such enhanced stability results from, at least partially, multivalence. Such results also inspire chemists to use imine condensation for self-assembly in water, a solvent that is considered not compatible with imine bond for a long time.

Straight from the bottle! Wine and juice dicarboxylic acids as templates for supramolecular cage self-assembly

Two imine based supramolecular cages are able to self-assemble in the presence of a complex mixture like wine or fruit juices. Taking advantage of templating agents present in these mixtures the systems are able to form and to selectively encapsulate dicarboxylic systems present in the mixtures. This capability has been exploited to develop molecular systems able to report the enantiomeric excess and composition of (a)chiral dicarboxylic acids in fruit juices and wines using ¹H-NMR.

Materials Precursor Score: Modeling Chemists' Intuition for the Synthetic Accessibility of Porous Organic Cage Precursors

Computation is increasingly being used to try to accelerate the discovery of new materials. One specific example of this is porous molecular materials, specifically porous organic cages, where the porosity of the materials predominantly comes from the internal cavities of the molecules themselves. The computational discovery of novel structures with useful properties is currently hindered by the difficulty in transitioning from a computational prediction to synthetic realization. Attempts at experimental validation are often time-consuming, expensive, and frequently, the key bottleneck of material discovery. In this work, we developed a computational screening workflow for porous molecules that includes consideration of the synthetic difficulty of material precursors, aimed at easing the transition between computational prediction and experimental realization. We trained a machine learning model by first collecting data on 12,553 molecules categorized either as "easy-to-synthesize" or "difficult-to-synthesize" by expert chemists with years of experience in organic synthesis. We used an approach to address the class imbalance present in our data set, producing a binary classifier able to categorize easy-to-synthesize molecules with few false positives. We then used our model during computational screening for porous organic molecules to bias toward precursors whose easier synthesis requirements would make them promising candidates for experimental realization and material development. We found that even by limiting precursors to those that are easier-to-synthesize, we are still able to identify cages with favorable, and even some rare, properties.

Self-assembly of chiral BINOL cages via imine condensation

Condensation of an (S)- or (R)-BINOL-derived dialdehyde and tris(2-aminoethyl)amine produced chiral [2+3] imine cages, which were further reduced to furnish more stable chiral amine cages and applied in the enantioselective recognition of (1R,2R)- and (1S,2S)-1,2-diaminocyclohexane.

Dynamic Nucleophilic Aromatic Substitution of Tetrazines

A dynamic nucleophilic aromatic substitution of tetrazines (SN Tz) is presented herein. It combines all the advantages of dynamic covalent chemistry with the versatility of the tetrazine moiety. Indeed, libraries of compounds or sophisticated molecular structures can be easily obtained, which are susceptible to post-functionalization by inverse electron demand Diels-Alder (IEDDA) reaction, which also locks the exchange. Additionally, the structures obtained can be disassembled upon the application of the right stimulus, either UV irradiation or a suitable chemical reagent. Moreover, SN Tz is compatible with the imine chemistry of anilines. The high potential of this methodology has been proved by building two responsive supramolecular systems: A macrocycle that displays a light-induced release of acetylcholine; and a truncated [4+6] tetrahedral shape-persistent fluorescent cage, which is disassembled by thiols unless it is post-stabilized by IEDDA.

Synergistic covalent-and-supramolecular polymers connected by [2]pseudorotaxane moieties

Synergistic covalent-and-supramolecular polymers, in which covalent polymers and supramolecular polymers connect with each other through [2]pseudorotaxane moieties, are designed and synthesized. The unique topological structure effectively enhances the synergistic effect between these two polymers, thereby generating a novel class of mechanically adaptive materials.

Self-Assembly of a Purely Covalent Cage with Homochirality by Imine Formation in Water

Self-assembly of host molecules in aqueous media via metal-ligand coordination is well developed. However, the preparation of purely covalent counterparts in water has remained a formidable task. An anionic tetrahedron cage was successfully self-assembled in a [4+4] manner by condensing a trisamine and a trisformyl in water. Even although each individual imine bond is rather labile and apt to hydrolyze in water, the tetrahedron is remarkably stable or inert due to multivalence. The tetrahedral cages, as well as its neutral counterparts dissolved in organic solvent, have homochirality, namely that their four propeller-shaped trisformyl residues adopt the same rotational conformation. The cage is able to take advantage of hydrophobic effect to accommodate a variety of guest molecules in water. When a chiral guest was recognized, the formation of one enantiomer of the cage became more favored relative to the other. As a consequence, the cage could be produced in an enantioselective manner. The tetrahedron is able to maintain its chirality after removal of the chiral guest-probably on account of the cooperative occurrence of intramolecular forces that restrict the intramolecular flipping of phenyl units in the cage framework.

One-Pot and Shape-Controlled Synthesis of Organic Cages

Organic cages are fascinating because of their well-defined 3D cavities, excellent stability, and accessible post-modification. However, the synthesis is normally realized by fragment coupling approach in low yields. Herein, we report one-pot, gram-scale and shape-controlled synthesis of two covalent organic cages (box-shaped [4]cage and triangular prism-shaped [2]cage) in yields of 46 % and 52 %, involving direct condensation of triangular 1,3,5-tris(2,4-dimethoxyphenyl)benzene monomer with paraformaldehyde and isobutyraldehyde, respectively. The cages can convert into high-yielding per-hydroxylated analogues. The [2]cage can be utilized as gas chromatographic stationary phase for high-resolution separation of benzene/cyclohexane and toluene/methylcyclohexane. By changing the central moiety of the triangular monomer and/or aldehyde, this synthetic method would have the potential to be a general strategy to access diverse cages with tunable shape, size, and electronic properties.

Self-Sorting in Dynamic Combinatorial Libraries Leads to the Co-Existence of Foldamers and Self-Replicators

Nature segregates fundamental tasks such as information storage/transmission and catalysis between two different compound classes (e.g. polynucleotides for replication and folded polyamides for catalysis). This division of labor is likely a product of evolution, raising the question of how simpler systems in which replicators and folded macromolecules co-exist may emerge in the transition from chemistry to biology. In synthetic systems, achieving co-existence of replicators and foldamers in a single molecular network remains an unsolved problem. Previous work on dynamic molecular networks has given rise to either self-replicating fibers or well-defined foldamer structures (or completely un-sorted complex systems). We report a system in which two cross-reactive dithiol (nucleobase- and peptide-based) building blocks self-sort into a replicator fiber and foldamer that both emerge spontaneously and co-exist. The self-sorting behavior remains prevalent across different building block ratios as two phases of emergence occur: replicator growth followed by foldamer formation. This is attributed to the autocatalytic formation of the replicator fiber, followed by enrichment of the system in the remaining building block, which is subsequently incorporated into a foldamer.

Quantification and Prediction of Imine Formation Kinetics in Aqueous Solution by Microfluidic NMR Spectroscopy

Quantitatively predicting the reactivity of dynamic covalent reaction is essential to understand and rationally design complex structures and reaction networks. Herein, the reactivity of aldehydes and amines in various rapid imine formation in aqueous solution by microfluidic NMR spectroscopy was quantified. Investigation of reaction kinetics allowed to quantify the forward rate constants k₊ by an empirical equation, of which three independent parameters were introduced as reactivity parameters of aldehydes (S_E , E) and amines (N). Furthermore, these reactivity parameters were successfully used to predict the unknown forward rate constants of imine formation. Finally, two competitive reaction networks were rationally designed based on the proposed reactivity parameters. Our work has demonstrated the capability of microfluidic NMR spectroscopy in quantifying the kinetics of label-free chemical reactions, especially rapid reactions that are complete in minutes.