Spin-Crossover Properties of an Iron(II) Coordination Nanohoop

Synthesis, Characterization, and Resistive Memory Behaviors of Highly Strained Cyclometalated Platinum(II) Nanohoops

Strained carbon nanohoops exhibit attractive photophysical properties due to their unique π-conjugated structure. However, incorporation of such nanohoops into the pincer ligand of metal complexes has rarely been explored. Herein, a new family of highly strained cyclometalated platinum(II) nanohoops has been synthesized and characterized. Strain-promoted C-H bond activation has been observed during the metal coordination process, and Hückel-Möbius topology and random-columnar packing in the solid state are found. Transient absorption spectroscopy revealed the size-dependent excited state properties of the nanohoops. Moreover, the nanohoops have been successfully employed as active materials in the fabrication of solution-processable resistive memory devices, including the use of the smallest platinum(II) nanohoop for the fabrication of a binary memory, with low switching threshold voltages of ca. 1.5 V, high ON/OFF current ratios, and good stability. These results demonstrate that strain incorporation into the structure can be an effective strategy to fundamentally fine-tune the reactivity, optoelectronic, and resistive memory properties.

A High-Yielding Active Template Click Reaction (AT-CuAAC) for the Synthesis of Mechanically Interlocked Nanohoops

Mechanically interlocked molecules (MIMs) represent an exciting yet underexplored area of research in the context of carbon nanoscience. Recently, work from our group and others has shown that small carbon nanotube fragments-[n]cycloparaphenylenes ([n]CPPs) and related nanohoop macrocycles-may be integrated into mechanically interlocked architectures by leveraging supramolecular interactions, covalent tethers, or metal-ion templates. Still, available synthetic methods are typically difficult and low yielding, and general methods that allow for the creation of a wide variety of these structures are limited. Here we report an efficient route to interlocked nanohoop structures via the active template Cu-catalyzed azide-alkyne cycloaddition (AT-CuAAC) reaction. With the appropriate choice of substituents, a macrocyclic precursor to 2,2'-bipyridyl embedded [9]CPP (bipy[9]CPP) participates in the AT-CuAAC reaction to provide [2]rotaxanes in near-quantitative yield, which can then be converted into the fully π-conjugated catenane structures. Through this approach, two nanohoop[2]catenanes are synthesized which consist of a bipy[9]CPP catenated with either Tz[10]CPP or Tz[12]CPP (where Tz denotes a 1,2,3-triazole moiety replacing one phenylene ring in the [n]CPP backbone).

Ruthenium-Cyclopentadienyl-Cycloparaphenylene Complexes: Sizable Multicharged Cations Exhibiting High DNA-Binding Affinity and Remarkable Cytotoxicity

Two novel sizable multicharged cationic complexes, of the formulae [(η6--[12]CPP)[Ru(η5--Cp)]12]Χ12 and [(η6--[11]CPP)[Ru(η5--Cp)]11]Χ11, CPP = cycloparaphenylene, Cp = cyclopentadienyl, X = [PF6]-, (1), (3) and [Cl]-, (2), (4), were synthesized and characterized using NMR techniques, high-resolution mass spectrometry, and elemental analyses. Complexes (1) and (3) were stable in acetone and acetonitrile solutions over 48 h. In contrast, the water-soluble (2) and (4) begin to decompose in aqueous media after 1 h, due to the [Cl]- tendency for nucleophilic attack on ruthenium of the {Ru(η5--Cp)} units. Fluorescence quenching experiments conducted during the stability window of (2) with the d(5'-CGCGAATTCGCG-3')2-EtBr adducts revealed remarkably high values for Ksv = 1.185 × 104 ± 0.025 M-1 and Kb = 3.162 × 105 ± 0.001 M-1. Furthermore, the cytotoxic activity of (2) against A2780, A2780res, and MCF-7 cancer cell lines shows that it is highly cytotoxic with IC50 values in the range of 4.76 ± 1.85 to 16 ± 0.81 μΜ.

Continuous-Flow Synthesis of Cycloparaphenylene Building Blocks on a Large Scale

The synthesis of [n]cycloparaphenylenes ([n]CPPs) and similar nanohoops is usually based on combining building blocks to a macrocyclic precursor, which is then aromatized in the final step. Access to those building blocks in large amounts will simplify the synthesis and studies of CPPs as novel functional materials for applications. Herein, we report a continuous-flow synthesis of key CPP building blocks by using versatile synthesis techniques such as electrochemical oxidation, lithiations and Suzuki cross-couplings in self-built reactors on up-to kilogram scale.

Dynamic Aggregation Triggering Reversible Spin-State Switching

The manipulation of spin-state switching (SSS) under ambient conditions is of significant importance for the construction of molecular switches. Herein, we demonstrate that reversible SSS can be mediated by the aggregation state of a near-infrared (NIR)-sensitive ferrous complex. The ferrous complex was J-aggregated in a DMF suspension and with a low-spin (LS) state; however, with the addition of water, it changed to H-aggregation and reached a high-spin (HS) state, owing to the enhanced intramolecular charge transfer and metal-to-ligand charge transfer. Interestingly, the following NIR irradiation can restore the J-aggregation and LS states owing to the enhanced ligand-to-ligand charge transfer. More interestingly, the ferrous complex can be further incorporated into a hygroscopic sponge that was capable of capturing humidity effectively for all weather conditions, which displayed reversible SSS via alternating atmospheric humidity capture and NIR irradiation under ambient conditions in the sponge state. This study thus opens up a new avenue for the development of novel smart molecular switches at the device level.

Synthesis and metalation of polycatechol nanohoops derived from fluorocycloparaphenylenes

Due to their unique topology and distinct physical properties, cycloparaphenylenes (CPPs) are attractive building blocks for new materials synthesis. While both noncovalent interactions and irreversible covalent bonds have been used to link CPP monomers into extended materials, a coordination chemistry approach remains less explored. Here we show that nucleophilic aromatic substitution reactions can be leveraged to rapidly introduce donor groups (-OR, -SR) onto polyfluorinated CPP rings. Demethylation of methoxide-substituted CPPs produces polycatechol nanohoop ligands that are readily metalated to produce well-defined, multimetallic CPP complexes. As catechols are recurring motifs throughout coordination chemistry and dynamic covalent chemistry, the polycatechol nanohoops reported here open the door to new strategies for the bottom-up synthesis of atomically precise CPP-based materials.

Investigation of the unique magnetic behaviours of isomers in a 1,2-dithiooxalato-bridged diiron(II) complex

1,2-Dithiooxalate (dto) can be employed as a bridging ligand and it exhibits symmetric (O,S-chelation) or asymmetric (O,O- and S,S-chelation) coordination forms. In this study, we prepared a novel dto-bridged diiron(II) complex, [{Fe(TPA)}2(μ-dto)](ClO4)2 (1), where TPA is tris(2-pyridylmethyl)amine. Interestingly, the bridging dto ligand exhibited not only the asymmetric form but also a linkage isomer and a diastereomer within the same crystal. Notably, the three isomers of 1 exhibited different magnetic properties, resulting in a multi-step spin crossover behaviour.

Synergetic Spin-Crossover and Luminescent Properties in a Multifunctional 2D Iron(II) Coordination Polymer

We designed and synthesized a strong fluorescent tetradentate pyridine ligand, 3,6,11,12-tetra(pyridin-4-yl)dibenzo[a,c]phenazine (TPDP), by covalently grafting pyridyl to fluorescent dye dbpz, which can react with the Fe(NCX)₂ (X = S and Se) unit, obtaining two new 2D [4 × 4] square-grid compounds, namely, {Fe^II(TPDP)₂(SCN)₂·CHCl₃·4CH₃OH}_n (1) and {[Fe^II(TPDP)₂(SeCN)₂]·CH₂Cl₂·4CH₃OH}_n (2). Both of them show expected one-step spin-crossover (SCO) properties, and complex 2^vacuum exhibits a combination of the SCO phenomenon and fluorescence in a synergetic way. The energy transfer mechanism of 2^vacuum is verified by the theoretical calculations and experimental results. This study provides an effective strategy to synthesize large conjugated fluorescent ligands using dyes to further form SCO-luminescent bifunctional materials.

[4]Cyclo-N-alkyl-2,7-carbazoles: Influence of the Alkyl Chain Length on the Structural, Electronic, and Charge Transport Properties

Macrocycles possessing radially oriented π-orbitals have experienced a fantastic development. However, their incorporation in organic electronic devices remains very scarce. In this work, we aim at bridging the gap between organic electronics and nanorings by reporting the first detailed structure-properties-device performance relationship study of organic functional materials based on a nanoring system. Three [4]cyclo-N-alkyl-2,7-carbazoles bearing different alkyl chains on their nitrogen atoms have been synthesized and characterized by combined experimental and theoretical approaches. This study includes electrochemical, photophysical, thermal, and structural solid-state measurements and charge transport properties investigations. An optimized protocol of the Pt approach has been developed to synthesize the [4]cyclocarbazoles in high yield (52-64%), of great interest for further development of nanorings, especially in materials science. The charge transport properties of [4]cyclocarbazoles and model compound [8]cycloparaphenylene ([8]CPP) have been studied. Although no field effect (FE) mobility was recorded for the benchmark [8]CPP, FE mobility values of ca. 10^-5 cm²·V^-1·s^-1 were recorded for the [4]cyclocarbazoles. The characteristics (threshold voltage V_TH, subthreshold swing SS, trapping energy ΔE) recorded for the three [4]cyclocarbazoles appear to be modulated by the alkyl chain length borne by the nitrogen atoms. Remarkably, the space-charge-limited current mobilities measured for the [4]cyclocarbazoles are about 3 orders of magnitude higher than that of [8]CPP (1.37/2.78 × 10^-4 cm²·V^-1·s^-1 for the [4]cyclocarbazoles vs 1.21 × 10^-7 cm²·V^-1·s^-1 for [8]CPP), highlighting the strong effect of nitrogen bridges on the charge transport properties. The whole study opens the way to the use of nanorings in electronics, which is now the next step of their development.

Advanced sol-gel process for efficient heterogeneous ring-closing metathesis

Olefin metathesis, a powerful synthetic method with numerous practical applications, can be improved by developing heterogeneous catalysts that can be recycled. In this study, a single-stage process for the entrapment of ruthenium-based catalysts was developed by the sol-gel process. System effectiveness was quantified by measuring the conversion of the ring-closing metathesis reaction of the substrate diethyl diallylmalonate and the leakage of the catalysts from the matrix. The results indicate that the nature of the precursor affects pore size and catalyst activity. Moreover, matrices prepared with tetraethoxysilane at an alkaline pH exhibit a better reaction rate than in the homogenous system under certain reaction conditions. To the best of our knowledge, this is the first study to present a one-step process that is simpler and faster than the methods reported in the literature for catalyst entrapment by the sol-gel process under standard conditions.